Yamaha DD-75 Omistajan opas

Brändi: Yamaha

Malli: DD-75

Kategoria: Music drums

Tyyppi: Omistajan opas

Owner’s Manual

Before using the instrument, be sure to read “PRECAUTIONS” on page 5–6.

Digital Percussion

DD-75 Owner’s Manual

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply

(adapter). DO NOT connect this product to any power supply or

adapter other than one described in the manual, on the name

plate, or specifically recommended by Yamaha.

WARNING: Do not place this product in a position where any-

one could walk on, trip over, or roll anything over power or con-

necting cords of any kind. The use of an extension cord is not

recommended! If you must use an extension cord, the minimum

wire size for a 25’ cord (or less) is 18 AWG. NOTE: The smaller

the AWG number, the larger the current handling capacity. For

longer extension cords, consult a local electrician.

This product should be used only with the components supplied

or; a cart, rack, or stand that is recommended by Yamaha. If a

cart, etc., is used, please observe all safety markings and instruc-

tions that accompany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be correct

at the time of printing. However, Yamaha reserves the right to

change or modify any of the specifications without notice or obli-

gation to update existing units.

This product, either alone or in combination with an amplifier and

headphones or speaker/s, may be capable of producing sound

levels that could cause permanent hearing loss. DO NOT operate

for long periods of time at a high volume level or at a level that is

uncomfortable. If you experience any hearing loss or ringing in the

ears, you should consult an audiologist.

IMPORTANT: The louder the sound, the shorter the time period

before damage occurs.

Some Yamaha products may have benches and / or accessory

mounting fixtures that are either supplied with the product or as

optional accessories. Some of these items are designed to be

dealer assembled or installed. Please make sure that benches

are stable and any optional fixtures (where applicable) are well

secured BEFORE using.

Benches supplied by Yamaha are designed for seating only. No

other uses are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge relating to

how a function or effect works (when the unit is operating as

designed) are not covered by the manufacturer’s warranty, and

are therefore the owners responsibility. Please study this manual

carefully and consult your dealer before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe and

environmentally friendly. We sincerely believe that our products

and the production methods used to produce them, meet these

goals. In keeping with both the letter and the spirit of the law, we

want you to be aware of the following:

Battery Notice:

This product MAY contain a small non-rechargeable battery which

(if applicable) is soldered in place. The average life span of this

type of battery is approximately five years. When replacement

becomes necessary, contact a qualified service representative to

perform the replacement.

This product may also use “household” type batteries. Some of

these may be rechargeable. Make sure that the battery being

charged is a rechargeable type and that the charger is intended

for the battery being charged.

When installing batteries, never mix old batteries with new ones,

and never mix different types of batteries. Batteries MUST be

installed correctly. Mismatches or incorrect installation may result

in overheating and battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep all

batteries away from children. Dispose of used batteries promptly

and as regulated by the laws in your area. Note: Check with any

retailer of household type batteries in your area for battery dis-

posal information.

Disposal Notice:

Should this product become damaged beyond repair, or for some

reason its useful life is considered to be at an end, please

observe all local, state, and federal regulations that relate to the

disposal of products that contain lead, batteries, plastics, etc. If

your dealer is unable to assist you, please contact Yamaha

directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The

model number, serial number, power requirements, etc., are

located on this plate. You should record the model number, serial

number, and the date of purchase in the spaces provided below

and retain this manual as a permanent record of your purchase.

Model

Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

92-BP (bottom)

For DD-75

DD-75 Owner’s Manual

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions

contained in this manual, meets FCC requirements. Modifica-

tions not expressly approved by Yamaha may void your author-

ity, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories

and/or another product use only high quality shielded cables.

Cable/s supplied with this product MUST be used. Follow all

installation instructions. Failure to follow instructions could void

your FCC authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with

the requirements listed in FCC Regulations, Part 15 for Class

“B” digital devices. Compliance with these requirements pro-

vides a reasonable level of assurance that your use of this

product in a residential environment will not result in harmful

interference with other electronic devices. This equipment gen-

erates/uses radio frequencies and, if not installed and used

according to the instructions found in the users manual, may

cause interference harmful to the operation of other electronic

devices. Compliance with FCC regulations does not guarantee

that interference will not occur in all installations. If this product

is found to be the source of interference, which can be deter-

mined by turning the unit “OFF” and “ON”, please try to elimi-

nate the problem by using one of the following measures:

Relocate either this product or the device that is being affected

by the interference.

Utilize power outlets that are on different branch (circuit breaker

or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead, change

the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to distribute

this type of product. If you can not locate the appropriate

retailer, please contact Yamaha Corporation of America, Elec-

tronic Service Division, 6600 Orangethorpe Ave, Buena Park,

CA90620

The above statements apply ONLY to those products distrib-

uted by Yamaha Corporation of America or its subsidiaries.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

FCC INFORMATION (U.S.A.)

For AC adaptor and DD-75

OBSERVERA!

Apparaten kopplas inte ur växelströmskällan (nätet) så länge som den

ar ansluten till vägguttaget, även om själva apparaten har stängts av.

ADVARSEL: Netspændingen til dette apparat er IKKE afbrudt,

sålænge netledningen sidder i en stikkontakt, som er tændt — også

selvom der er slukket på apparatets afbryder.

VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko

laitetta verkosta.

(standby)

The model number, serial number, power requirements, etc., may be

found on or near the name plate, which is at the bottom of the unit.

You should note this serial number in the space provided below and

retain this manual as a permanent record of your purchase to aid

identification in the event of theft.

Model No.

Serial No.

(bottom_en_01)

DD-75 Owner’s Manual

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol

within an equilateral triangle is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient magni-

tude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and main-

tenance (servicing) instructions in the liter-

ature accompanying the product.

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accor-

dance with the manufacturer’s instructions.

8 Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart, stand, tri-

pod, bracket, or table specified by

the manufacturer, or sold with the

apparatus. When a cart is used,

use caution when moving the

cart/apparatus combination to

avoid injury from tip-over.

13 Unplug this apparatus during

lightning storms or when unused for long periods of

time.

14 Refer all servicing to qualified service personnel. Ser-

vicing is required when the apparatus has been dam-

aged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has

been dropped.

(UL60065_03)

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT SAFETY INSTRUCTIONS

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

For AC adaptor

CAN ICES-3 (B)/NMB-3(B)

(can_b_02)

(fcc_sengen_C)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

DD-75 Owner’s Manual

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

For AC adaptor

WARNING

• This AC adaptor is designed for use with only Yamaha electronic instruments. Do

not use for any other purpose.

• Indoor use only. Do not use in any wet environments.

• Do not put burning items, such as candles, on the unit. A burning item may fall

over and cause a fire.

CAUTION

• When setting up, make sure that the AC outlet is easily accessible. If some

trouble or malfunction occurs, immediately turn off the power switch of the

instrument and disconnect the AC adaptor from the outlet. When the AC adaptor

is connected to the AC outlet, keep in mind that electricity is flowing at the

minimum level, even if the power switch is turned off. When you are not using

the instrument for a long time, make sure to unplug the power cord from the wall

AC outlet.

For DD-75

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• Do not place the power cord near heat sources such as heaters or radiators. Also,

do not excessively bend or otherwise damage the cord, or place heavy objects on

it.

• Only use the voltage specified as correct for the instrument. The required voltage

is printed on the name plate of the instrument.

• Use the specified adaptor (page 54) only. Using the wrong adaptor can result in

damage to the instrument or overheating.

• Check the electric plug periodically and remove any dirt or dust which may have

accumulated on it.

• This instrument contains no user-serviceable parts. Do not open the instrument

or attempt to disassemble or modify the internal components in any way. If it

should appear to be malfunctioning, discontinue use immediately and have it

inspected by qualified Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet

conditions, or place on it any containers (such as vases, bottles or glasses)

containing liquids which might spill into any openings. If any liquid such as

water seeps into the instrument, turn off the power immediately and unplug the

power cord from the AC outlet. Then have the instrument inspected by qualified

Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit. A burning item may fall

over and cause a fire.

• Follow the precautions below. Failure to do so might result in explosion, fire,

overheating or battery fluid leakage.

- Do not tamper with or disassemble batteries.

- Do not dispose of batteries in fire.

- Do not attempt to recharge batteries that are not designed to be charged.

- Keep the batteries separate from metallic objects such as necklaces, hairpins,

coins, and keys.

- Use the specified battery type (page 54) only.

- Use new batteries, all of which are the same type, same model, and made by

the same manufacturer.

- Always make sure all batteries are inserted in conformity with the +/- polarity

markings.

- When the batteries run out, or if the instrument is not to be used for a long

time, remove the batteries from the instrument.

- When using Ni-MH batteries, follow the instructions that came with the

batteries. Use only the specified charger device when charging.

• Keep batteries away from small children who might accidentally swallow them.

• If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid

should come in contact with your eyes, mouth, or skin, wash immediately with

water and consult a doctor. Battery fluid is corrosive and may possibly cause loss

of sight or chemical burns.

• When one of the following problems occur, immediately turn off the power switch

and disconnect the electric plug from the outlet. (If you are using batteries,

remove all batteries from the instrument.) Then have the device inspected by

Yamaha service personnel.

- The power cord or plug becomes frayed or damaged.

- It emits unusual smells or smoke.

- Some object has been dropped into the instrument.

- There is a sudden loss of sound during use of the instrument.

Power supply/AC adaptor

Do not open

Water warning

Fire warning

Battery

If you notice any abnormality

DMI-5 1/2

DD-75 Owner’s Manual

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

•

Do not connect the instrument to an electrical outlet using a multiple-connector. Doing so

can result in lower sound quality, or possibly cause overheating in the outlet.

• When removing the electric plug from the instrument or an outlet, always hold

the plug itself and not the cord. Pulling by the cord can damage it.

• Remove the electric plug from the outlet when the instrument is not to be used for

extended periods of time, or during electrical storms.

• Do not place the instrument in an unstable position where it might accidentally

fall over.

• Before moving the instrument, remove all connected cables, to prevent damage

to the cables or injury to anyone who might trip over them.

• When setting up the product, make sure that the AC outlet you are using is easily

accessible. If some trouble or malfunction occurs, immediately turn off the power

switch and disconnect the plug from the outlet. Even when the power switch is

turned off, electricity is still flowing to the product at the minimum level. When

you are not using the product for a long time, make sure to unplug the power

cord from the wall AC outlet.

• Before connecting the instrument to other electronic components, turn off the

power for all components. Before turning the power on or off for all components,

set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum levels and

gradually raise the volume controls while playing the instrument to set the

desired listening level.

• Do not insert a finger or hand in any gaps on the instrument.

• Never insert or drop paper, metallic, or other objects into the gaps on the panel.

This could cause physical injury to you or others, damage to the instrument or

other property, or operational failure.

• Do not rest your weight on, or place heavy objects on the instrument, and do not

use excessive force on the buttons, switches or connectors.

•

Do not use the instrument/device or headphones for a long period of time at a high or

uncomfortable volume level, since this can cause permanent hearing loss. If you

experience any hearing loss or ringing in the ears, consult a physician.

Always turn the power off when the instrument is not in use.

Even when the [ ] (Standby/On) switch is in standby status (display is off), electricity is still flowing to the instrument at the minimum level.

When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.

Make sure to discard used batteries according to local regulations.

NOTICE

To avoid the possibility of malfunction/ damage to the product, damage to data, or

damage to other property, follow the notices below.

 Handling

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile

phone, or other electric devices. Otherwise, the instrument, TV, or radio may

generate noise. When you use the instrument along with an application on your

iPad, iPhone or iPod touch, we recommend that you set “Airplane Mode” to “ON”

on that device in order to avoid noise caused by communication.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or

heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent

the possibility of panel disfiguration, damage to the internal components or

unstable operation. (Verified operating temperature range: 5° – 40°C, or 41° –

104°F.)

• Do not place vinyl, plastic or rubber objects on the instrument, since this might

discolor the panel or pads.

 Maintenance

• When cleaning the instrument, use a soft cloth. Do not use paint thinners,

solvents, alcohol, cleaning fluids, or chemical-impregnated wiping cloths.

 Other cautions

• The rubber parts of the pads include anti-deterioration agents and other

components to help maintain long-term quality. Depending on the storage or

operating environment, these components may appear on the surface as whitish

dust (blooming), but this has no effect on product performance and functions,

and the product can continue to be used with confidence. Also, stick marks may

be present on the pads, but these are the result of product inspection.

If you are bothered by blooming or stick marks, wipe the pads firmly with a dry,

soft cloth or a soft cloth that has been moistened with water and thoroughly

wrung out.

• The rubber parts of the pads may become discolored due to changes over time,

but this has no effect on product performance and functions.

 Saving data

• The saved data may be lost due to some failure, an operation mistake, etc. Save

your important data onto an external device such as a computer (page 38).

Information

 About copyrights

• Copying of the commercially available musical data including but not limited to

MIDI data and/or audio data is strictly prohibited except for your personal use.

• This product incorporates and bundles contents in which Yamaha owns copyrights

or with respect to which Yamaha has license to use others' copyrights. Due to

which these contents are saved or recorded and remain virtually the same or very

similar to those in the product.

* The contents described above include a computer program, Accompaniment

Style data, MIDI data, WAVE data, voice recording data, a score, score data, etc.

* You are allowed to distribute medium in which your performance or music

production using these contents is recorded, and the permission of Yamaha

Corporation is not required in such cases.

 About this manual

• The illustrations as shown in this manual are for instructional purposes only, and

may appear somewhat different from those on your instrument.

• iPhone, iPad, iPod touch are trademarks of Apple Inc., registered in the U.S. and

other countries.

• The company names and product names in this manual are the trademarks or

registered trademarks of their respective companies.

Power supply/AC adaptor

Location

Connections

Handling caution

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.

DMI-5 2/2

DD-75 Owner’s Manual

Thank you for purchasing this Yamaha Digital Percussion!

We recommend that you read this manual carefully so that you can fully take advantage

of the advanced and convenient functions of the instrument. We also recommend that

you keep this manual in a safe and handy place for future reference.

About the Manuals

This instrument has the following documents and instructional materials.

 Included Documents

Owner’s Manual (this book)

This document explains how to use the instrument.

 Online Materials (downloadable from the Internet)

iPhone/iPad Connection Manual

Explains how to connect the instrument to smart devices, such as iPhone, iPad, etc.

Computer-related Operations

Includes instructions on connecting this instrument to a computer, and operations related to transferring song

data.

MIDI Reference

Contains MIDI-related information.

To obtain these manuals, access the Yamaha Downloads, and then the model name for searching the desired

files.

Included Accessories

• Owner’s Manual (this book)

• Drum stick (1 pair)

• Foot Pedal 1 & 2

• AC adaptor*

• Warranty*

• Online Member Product Registration

*: May not be included depending on your particular locale. Check with your Yamaha dealer.

Yamaha Downloads https://download.yamaha.com/

DD-75 Owner’s Manual

Main Features

 Designed for comfortable playing

Each of the drum pads are angled and positioned on the panel for optimum playability and comfort. The

pads and pedal 1 can be adjusted independently over four levels, allowing for expressive drumming—not

only with the supplied sticks, but also for playing with your hands, by simply setting it to Hand Percussion

mode (page 18).

 Realistic drum sound – Stereo Sampling

You can choose and play with 570 Voices, which provide for a variety of percussion sounds, from realistic

drum sounds (created with Stereo Sampling) to ethnic percussion sound of Japanese drum, Asia, Latin

America and beyond.

 75 Drum kits

The instrument contains 75 drum kits of different genres for you to choose from. Moreover, the Voices

can be assigned to each drum pads and pedals to create your own original drum kits.

 105 Songs

The instrument features 22 Songs including the Demos, and 83 Patterns that cover a wide variety of

music genres. You can play along with the full playback, or mute tracks and play the missing parts.

 AUX IN Jack

This jack is for connection to an external audio source, letting you play the instrument with music and

accompaniment.

Compatible Formats and Functions

GM System Level 1

“GM System Level 1” is an addition to the MIDI standard which ensures that any GM-com-

patible music data can be accurately played by any GM-compatible tone generator, regard-

less of manufacturer. The GM mark is affixed to all software and hardware products that

support GM System Level.

XGlite

As its name implies, “XGlite” is a simplified version of Yamaha’s high-quality XG tone gener-

ation format. Naturally, you can play back any XG song data using an XGlite tone generator.

However, keep in mind that some songs may play back differently compared to the original

data, due to the reduced set of control parameters and effects.

DD-75 Owner’s Manual

Contents

PRECAUTIONS .............................................. 5

NOTICE .......................................................... 6

Information ...................................................... 6

About the Manuals .......................................... 7

Included Accessories ...................................... 7

Main Features ................................. 8

Panel Controls ............................. 10

Setting Up ..................................... 12

Power Requirements .................................... 12

Connecting Pedals 1 and 2 ........................... 13

Turning the Power On/Off ............................. 13

Setting the Battery Type ............................... 13

Adjusting the Master Volume ........................ 14

Setting the Auto Power Off function .............. 14

Setting the Master EQ Type ......................... 14

Connecting Headphones or

External Speaker ..................................... 14

Using a Snare Drum Stand ........................... 15

Playing the Demo Song ............... 16

Play the Pads/Pedals ................... 17

Pad Names ................................................... 17

Setting the Hand Percussion ON/OFF .......... 18

Hand Percussion Lock .................................. 18

Selecting and Playing a Drum Kit ................. 19

Assigning Voices to Individual Pads and Pedals

and Saving to a Custom Kit (“

C01

”–“

C10

”)

... 20

Setting the Reverb type ................................ 21

Setting the Pad Sensitivity ............................ 22

Setting the Click ON/OFF ............................. 25

Click Settings ................................................ 25

Playing a Song ............................. 28

Selecting and Playing a Song ....................... 28

Tap Start ....................................................... 29

Pad Start ....................................................... 30

Setting the Auto Kit Select ON/OFF ............. 31

Adjusting the Tempo ..................................... 32

Play along with a Song ................ 33

Setting the Track ON/OFF ............................ 33

Break ............................................................ 33

Using A-B Repeat ......................................... 34

Recording a Song ........................ 35

Recording ..................................................... 35

Playing the recorded song ............................ 36

Song Clear .................................................... 37

Connecting to External Devices

... 38

Connecting to External MIDI Devices ........... 38

Connecting to a Computer ............................ 38

Playing an External Audio Device

with the Built-in Speakers ....................... 39

The Functions ............................... 40

Backup and Initialization ............. 41

Troubleshooting ........................... 42

Drum Voice List ............................ 43

Song List ....................................... 47

Drum Kit List ................................. 48

Drum Score ................................... 52

Specifications ............................... 54

Index .............................................. 55

Setting Up

Basic Operations

Appendix

DD-75 Owner’s Manual

Panel Controls

q MASTER VOLUME control.............................14

w Dial ..................................................................13

e KIT ASSIGN button.........................................20

r SENSITIVITY button .......................................22

t HAND PERC. button.......................................18

y KIT button ....................................................... 19

u CLICK button ..................................................25

i SONG button ..................................................28

o TEMPO/TAP button ........................................29

PART MUTE DRUM 1–3, BACKING buttons

.....33

!1 FUNCTION button ..........................................40

!2 DEMO button .................................................. 16

!3 [ ] (Standby/On) switch............................... 13

!4 REC button ..................................................... 35

!5 BREAK button ................................................33

!6 A-B REPEAT button .......................................34

!7 START/STOP button....................................... 28

!8 Display ............................................................ 13

!9 Drum pads (8)................................................. 17

Front Panel

Indicates the song number when power is turned on.

Panel Controls

DD-75 Owner’s Manual

@0 DC IN 12V (AC Adaptor) jack.........................12

@1 AUX IN jack .....................................................39

@2 PHONES/OUTPUT jack ..................................14

@3 PEDAL 2 • HI-HAT jack................................... 13

@4 PEDAL 1 • KICK jack...................................... 13

@5 MIDI IN/OUT terminals ................................... 38

@0@1@2@3@4@5

Rear Panel

Drum Sticks

• Use the sticks with caution. Do not use

them for anything other than playing the

instrument. Also, to avoid damage or injury,

refrain from waving them recklessly or

throwing them.

• Since speakers are built into this instru-

ment, you should be careful to never leave

any watches, credit cards or any kind of

magnetic storage media on the panel—

doing so may result in data loss or damage

to the items. Also avoid using this instru-

ment near a television or computer moni-

tor, since interference may result.

CAUTION

NOTICE

Pedal 2Pedal 1

Rear Panel

DD-75 Owner’s Manual

Setting Up

Be sure to do the following operations BEFORE turning on the power.

Power Requirements

Although the instrument will run either from an AC adaptor

or batteries, Yamaha recommends use of an AC adaptor

whenever possible. An AC adaptor is more environmen-

tally friendly than batteries and does not deplete

resources.

Using an AC Adaptor

Make sure that the [ ] (Standby/On) switch is off, then

connect the AC adaptor in the order shown in the illustra-

tion.

Using Batteries

This instrument requires C size, Alkaline (LR14)/Manga-

nese (R14) batteries, or rechargeable nickel-metal hydride

batteries (rechargeable Ni-MH batteries). The Alkaline bat-

teries or rechargeable Ni-MH batteries are recommended

for this instrument, since other types may result in poorer

battery performance.

1 Make sure that the power of the instrument is off.

2 Open the battery compartment cover located on

the instrument’s bottom panel.

3 Insert the six new batteries, being careful to follow

the polarity markings on the inside of the compart-

ment.

4 Replace the compartment cover, making sure that

it locks firmly in place.

• Use only the specified AC adaptor (page 54). Using the

wrong AC adaptor can result in damage to the instrument

or overheating.

• When using the AC adaptor with a removable plug, make

sure to keep the plug attached to the AC adaptor. Using the

plug alone can cause electric shock or fire.

• Never touch the metallic section when attaching the plug.

To avoid electric shock, short circuit or damage, also be

careful that there is no dust between the AC adaptor and

plug.

• When setting up the product, make sure that the AC outlet

you are using is easily accessible. If some trouble or mal-

function occurs, immediately turn the power off and dis-

connect the plug from the outlet.

• Follow the order shown above in reverse when disconnecting

the AC adaptor/power cord.

AC outlet

adaptor

DC IN jack

(page 11)

WARNING

Plug

Slide the plug as indicated.

The shape of the plug differs

depending on your area.

CAUTION

NOTE

• Connecting or disconnecting the power adaptor with bat-

teries installed may turn the power off, resulting in loss of

data being recorded or transferred at the time.

• Make sure to set the battery type correctly (page 13).

• When battery power becomes too low for proper operation,

the volume may be reduced, the sound may be distorted,

and other problems may occur. When this happens, make

sure to replace all batteries with new ones or already

recharged ones.

• This instrument cannot charge the batteries. Use only an

appropriate charger device when charging.

• Power will be automatically drawn from the AC adaptor if an

AC adaptor is connected while batteries are installed in the

instrument.

NOTICE

NOTE

Setting Up

DD-75 Owner’s Manual

Connecting Pedals 1 and 2

Connect the supplied Pedal 1 to the [PEDAL 1 (KICK)] jack

and Pedal 2 to the [PEDAL 2 (HI-HAT)] jack.

Turning the Power On/Off

Turn down the [MASTER VOLUME] dial to “MIN.”

2 Press the [ ] (Standby/On) switch to turn the

power on.

The display lights up. Adjust the volume as desired

while striking the pads.

3 Press and hold the [ ] (Standby/On) switch

for about a second to turn the power off.

Setting the Battery Type

Depending on the battery type to be used, you may need

to change the battery type setting on this instrument. To

change the setting, first turn on the power to the instru-

ment, then choose the battery type you would like to use.

Alkaline (and manganese) batteries are chosen by default.

1 Press the [FUNCTION] button.

Press the [DRUM 3] or [FUNCTION] button a number of

times until the “btt” item appears. The currently

selected battery type appears next to the “btt” indica-

tion.

2 Change the battery type by turning the dial.

To select Ni-MH, turn the dial to the right (clockwise)

until the “n-H” item appears, and to select Alkaline/

Manganese, turn the dial to the left (counter-clockwise)

until the “ALn” item appears.

Press the [FUNCTION] button to exit.

• Avoid getting caught in or tripping over the pedal cords;

this may cause the instrument to fall and result in damage

or injury.

• Avoid using the pedals directly on a soft floor, since they

may scratch the surface of the floor.

• Make sure that the pedal plugs are properly connected to the

PEDAL jacks before turning on the power.

• Do not press the pedals while turning the power on. Doing

this changes the recognized polarity of the pedal, resulting in

reversed pedal operation.

• You can use an Electronic drum pad KP65 (sold separately) or

an Electronic kick unit KU100 (sold separately) and hi-hat con-

troller HH65 or HH40 (sold separately) plugging into the

[PEDAL 1 (KICK)] jack and [PEDAL 2(HI-HAT)].

Pedal 1 Pedal 2

CAUTION

NOTICE

NOTE

When the power is turned on, Drum Kit number will

appear after the “dd” item appears. Drum Kit num-

ber “1” is normally selected.

• Even when the power switch is turned off, electricity is still

flowing to the product at the minimum level. When you are

not using the product for a long time, make sure to unplug

the power cord from the wall AC outlet.

• Do not attempt any other operations, such as pressing but-

tons or the pedal. Doing so may cause the instrument to

malfunction.

• Do not turn off the power while saving data (a “-” mark

appears and moves from left to right on the display). Doing

so can result in loss of data.

• Failure to set the appropriate battery type may shorten the

battery life. Make sure to set the battery type correctly.

CAUTION

NOTICE

Setting Up

DD-75 Owner’s Manual

Adjusting the Master Volume

To adjust the volume of the entire pad/pedal sound, use

the [MASTER VOLUME] dial while striking the pads or

pressing the pedals.

Setting the Auto Power Off function

To prevent unnecessary power consumption, this instru-

ment features an Auto Power Off function that automati-

cally turns the power off if the instrument is not operated

for a specified period of time. The amount of time that

elapses before the power is automatically turned off is 30

minutes by default; however, you can change the setting

as desired (page 40).



Disabling Auto Power Off (simple method)

While holding down the [SONG] button, press the [ ]

(Standby/On) switch to turn the instrument on. The “PoF”

item appears after the “dd” to indicate the Auto Power Off

function has been disabled.

Setting the Master EQ Type

Master equalizer (EQ) settings give you the best possible

sound when listening through different reproduction sys-

tems—the instrument’s internal speakers, headphones, or

an external speaker system.

1 Enter the master EQ type setting function.

Press the [FUNCTION] button once, then press the

[DRUM 3] or [BACKING] button a number of times until

the “Eqt” item appears.

After a while, the current master EQ type appears next

to the “Eqt” indiction.

2 Select the desired master EQ type.

Turn the dial clockwise to set to “HP” (Headphone), and

turn it counter-clockwise to set to “SP” (Speaker).

3 Press the [FUNCTION] button to exit from the

Function mode.

Connecting Headphones or

External Speaker

Connect a pair of headphones to the [PHONES/OUTPUT]

jack. This jack also functions as an external output. By

connecting to a computer, recorder, or other audio device,

you can output the audio signal of this instrument to that

external device. The speakers of this instrument are auto-

matically shut off when a plug is inserted into this jack. You

may also want to change the master EQ type setting to

enjoy the optimum sound for either way of listening.

• Do not use the instrument for a long period of time at a

high or uncomfortable volume level, since this can cause

permanent hearing loss.

CAUTION

• Do not use the instrument/device or headphones for a long

period of time at a high or uncomfortable volume level,

since this can cause permanent hearing loss.

• Before connecting the instrument to other electronic com-

ponents, turn off the power of all the components. Also,

before turning any components on or off, make sure to set

all volume levels to minimum. Otherwise, damage to the

components or electrical shock may occur.

• To avoid possible damage to the external device, first turn on

the power to the instrument, then to the external device. When

turning off the power, do so in reverse order: first turn off the

power to the external device, then to the instrument.

Display Master EQ type

HP for headphones or external speakers

(Default)

for internal speakers

Standard stereo

phone plug

CAUTION

NOTICE

Setting Up

DD-75 Owner’s Manual

Using a Snare Drum Stand

This instrument can be installed on a snare drum stand (sold separately)

for convenience and ease in playing.

Snare drum stand (sold separately): SS662, SS740A



Setting Up

• Open the legs wide enough so that the snare drum stand is stable, but

not so much that the pipe touches the floor. Tighten the wing nut E.

• As shown in the illustration, make sure to always position the snare

drum stand so that one of the legs extends toward the player.

• Use wing nut D to adjust the height, and turn B so that it faces the

player.

• Use wing nut C to adjust the angle of B so that the instrument is

installed horizontally.

• Use rotary nut A to loosen the three arm basket to fit the three inden-

tations on the bottom of the instrument.

• Make sure all the nuts are securely tightened.



To install the snare drum stand

Put the arm covers into the indentations on the bottom of the instrument,

and tighten rotary nut A until the arms are secured. Make sure all the

nuts are securely tightened.

Be sure to handle the snare drum stand with care. Follow the important

precautions below. If not, the snare drum stand may overturn, causing the

instrument to drop and damage, possibly resulting in personal injury.

• Always place the snare drum stand on a flat, stable surface.

• Do not apply excessive force to the instrument.

• Do not adjust the height of snare drum stand with the instrument

installed.

• Remove the snare drum stand from the instrument before moving the

instrument.

• Do not use the snare drum stand other than designated ones (page 54).

Arms

Pipe

Legs

Snare drum stand

Player

B: Faces the player

Keep horizontal

CAUTION

DD-75 Owner’s Manual

Playing the Demo Song

This instrument features several demonstration songs (“001”–“005”), specially created

to show you the dynamic possibilities of the instrument.

1 Start the Demo Song.

2 Select a Demo Song.

3 Stop the Demo Song.

Press the [DEMO] button and the demo song starts playing.

• With the Auto Kit Select feature turned on, the best suited Drum Kit for the song will

automatically be selected. (See the “Setting the Auto Kit Select ON/OFF” on

page 31.)

Use the dial to select a demo song (“001”–“005”).

To stop playback, press the [DEMO] button again or press the

[START/STOP] button.

NOTE

Basic Operations

DD-75 Owner’s Manual

Play the Pads/Pedals

Strike the pad with the supplied drum sticks or your hands to play the drum voices.

When playing the pads with your hands, turn the Hand Percussion feature on by press-

ing the [HAND PERC.] button (the lamp lights).

The sound volume of the pads responds to your playing; when you play soft the vol-

ume is soft, and when you play strongly the volume is loud.

Pad Names

A hi-hat sound is assigned to Pad 6 (Drum Kit 1). Striking

Pad 6 while pressing Pedal 2 produces a closed hi-hat

sound.

Striking Pad 2 without pressing the pedal produces an

open hi-hat sound. Pressing Pedal 2 produces a hi-hit

pedal sound.

Press Pedal 2 to control the Hihat.

(This is in the case of Drum Kit 1; for other

kits, this may control a different sound.)

• When using Pedal 2, touch response

does not function.

NOTE

Pedal 1 features touch response; the volume

responds to how hard you press the pedal.

• If your pressing of the pedal is too slow

or soft, there may be no sound.

NOTE

Pedal 2

180: Hi-Hat Pedal Bright

Pedal 1

3: Maple Bass Drum 3

Pad 1

40: Maple Snare

Open Rim

Pad 4

105: Maple Tom 2

Pad 3

103: Maple Tom 4

Pad 2

102: Maple Tom 5

Pad 6

179: Hi-Hat

Closed

Bright

Pad 5

211: Crash

Cymbal Dark

Pad 8

208:

Ride

Cymbal

Warm 1

Pad 7

210:

Ride

Cymbal Cup

Warm

 Ex. shown, Drum Kit 1

Play the Pads/Pedals

DD-75 Owner’s Manual

You can play the pads of the instrument either with the supplied sticks or with your hands. Press and set the fol-

lowing button when you play the instrument with your hands.

1 Press the [HAND PERC.] button.

If you perform on the instrument solely with your hands, we recommend that you use this operation to lock the

Hand Percussion so that it is always on. This protects the instrument from being inadvertently changed during

your performance.

1 Make sure that Hand Percussion is set to on (the lamp

is lit).

2 Set the Hand Percussion Lock to ON.

3 To turn off Hand Percussion Lock, press and hold the

[HAND PERC.] button until the “

LoC” is no longer

shown on the display.

Setting the Hand Percussion ON/OFF

When you press the [HAND PERC.] button, the button’s lamp lights,

and the pad sensitivity is automatically adjusted for optimum playing

by hand. At the same time, an appropriate song (057) and drum kit

(51) are automatically called up.

• Be sure to strike the pads only with your hands when HAND PERCUSSION is on.

Hand Percussion Lock

Press and hold the [HAND PERC.] button until “LoC” appears on the

display.

Lit

NOTE

Press and hold

Lit

Play the Pads/Pedals

DD-75 Owner’s Manual

The instrument allows you to choose from 75 different Drum Kits, which are preset voice combinations set to the

the eight pads and two pedals. (See “Drum Kit List” on page 48.)

The instrument also has ten Custom Drum Kits allowing you to assign the desired voices to the pads or pedals.

(See “Assigning Voices to Individual Pads and Pedals and Saving to a Custom Kit (“C01”–“C10”)” on page 20.)

1 Press the [KIT] button.

2 Select a Drum Kit Number.

Selecting and Playing a Drum Kit

When you press the [KIT] button, the currently selected Drum Kit

number appears on the display.

Turn the dial to select a Drum Kit number. Drum Kit numbers will

increase as the dial is turned to the right (clockwise), and decrease as

the dial is turned to the left (counter-clockwise).

• Drum Kit number “1” is normally selected when the power is turned on.

• Drum Kits “C01”–“C10” are Custom Kits.

* Custom Kits are those that you’ve assigned the desired voices to each pad and

pedal, then saved the entire assignments as a Kit. The initial settings of “C01”–

“C10” are Drum Kit number 1. (See “Assigning Voices to Individual Pads and

Pedals and Saving to a Custom Kit (“C01”–“C10”)” on page 20.)

NOTE

Play the Pads/Pedals

DD-75 Owner’s Manual

Drum Kit Voices can be changed and saved as a Custom Kit “C01”–“C10.” The instrument contains a total of

570 high quality drum sounds plus 30 drum phrases (see the “Drum Voice List” on page 43)—and you can

assign these freely to each of the 8 drum pads and 2 pedals. To call up the saved Custom Kit, press the [KIT]

button and use the dial to select a Custom Kit number.

1 Select a Drum Kit (“1”–“75”) you desired to change,

then press the [KIT ASSIGN] button.

2 Turn the dial and select a Custom Kit “C01”–“C10” for

saving.

3 Select a pad or pedal to be assigned.

4 Select a Voice Number.

Repeat the previous steps 3 and 4 for any or all of the pads and pedals.

Assigning Voices to Individual Pads and Pedals and Saving to a Custom Kit

(“

C01

”–“

C10

”)

When you press the [KIT ASSIGN] button, the button’s lamp lights,

and “C01” appears on the display.

Strike any pad one time (or press a pedal), and the voice number of

currently assigned Drum Kit is shown in the display.

You can select the voice by repeatedly striking the pad or repeatedly-

pressing the pedal (while listening to the voice), or by turning the dial.

 Striking the pad or pressing the pedal to select a voice.

Every time the pad is struck or a pedal is pressed, voice numbers will

increase by a value of one (1). In this method, you can hear and

select an assigned voice.

 Using the dial to select a voice.

Turn the dial to the right (clockwise), and voice numbers will increase.

Turn the dial to the left (counter-clockwise), and voice numbers will

decrease.

To cancel, simply press the [KIT] button.

See the “Drum Voice List” on page 43.

Lit

Sivu latautuu ...

Yamaha DD-75 Omistajan opas

Brändi: Yamaha

Malli: DD-75

Kategoria: Music drums

Tyyppi: Omistajan opas

Lataa PDF

raportti

muilla kielillä

polski: Yamaha DD-75 Instrukcja obsługi
Türkçe: Yamaha DD-75 El kitabı
English: Yamaha DD-75 Owner's manual
čeština: Yamaha DD-75 Návod k obsluze
svenska: Yamaha DD-75 Bruksanvisning
русский: Yamaha DD-75 Инструкция по применению
italiano: Yamaha DD-75 Manuale del proprietario
Deutsch: Yamaha DD-75 Bedienungsanleitung
português: Yamaha DD-75 Manual do proprietário
dansk: Yamaha DD-75 Brugervejledning
français: Yamaha DD-75 Le manuel du propriétaire
español: Yamaha DD-75 El manual del propietario
Nederlands: Yamaha DD-75 de handleiding
română: Yamaha DD-75 Manualul proprietarului

Yamaha DD-75 Omistajan opas

Yamaha DD-75 Omistajan opas

muilla kielillä

Liittyvät paperit