OWNER’S MANUAL
VCD-102K
NATURAL SOUND VIDEO CD CHANGER
ECHO
POWER
MPX
KARAOKE
KEY CONTROL DISC SKIP
SKIP
/
SEARCH
PREV NEXT
+10
12
34
56
7
89
0
LEVEL
KEY CONTROL
MIC 1 MIC 2
NATURAL SOUND VIDEO CD CHANGER
VIDEO CD
OPEN
/
CLOSE
STOP
/
RETURN
PLAY
/
SELECT
PLAYXCHANGE
MIN MAX MIN MAX
R L T
GRAPHICS
2
FEATURES
CONTENTS
●
5-Disc Carousel Auto-Changer (for
Playing Video CDs and Compact Discs)
●
Full Opening Disc Tray for Changing 5
Discs at a Time
●
PLAYXCHANGE; Disc Changing
Capability while Playing Another
●
Random Access Programmable Play
●
Single Track/Full Disc Repeat Play
●
Playback Control Function Available for
Video CDs, Version 2.0
●
Automatic Pause Inserting Function for
Karaoke (Karaoke Mode)
●
Quick Overview of a Track and a Disc with
a Touch of the DIGEST and INTRO
Buttons
●
Audio Output Mode Selector (MPX)
Button for Karaoke
●
13 Step
Key Level Control Buttons
●
Mic Level and Echo Level Controls
●
Video Output Format Selector (VIDEO
OUT MODE SELECT) Switch
●
Two MIC Jacks and a Mini-Jack for
Connecting with a Key Control Function
of a Microphone
●
On Screen Display Function (Displays
This Unit’s Operation Status on the TV
Monitor)
●
Remote Control Capability
Caution ............................................................3
Connections ....................................................4
Controls and Their Functions ..........................6
Basic Operations .............................................9
Pre-Programming Selections (for Singing
Karaoke) ........................................................15
Playback Control of Video CD (Ver. 2.0)
......................................................................18
Notes about the Remote Control Transmitter
......................................................................21
Handling Compact Discs ...............................21
Troubleshooting .............................................22
Specifications ................................................22
Thank you for selecting this YAMAHA Video CD changer.
This unit can play discs of the following types only.
Never attempt to load a disc other than above into the unit because it may cause a damage to this unit and/or other units
connected to this unit.
VIDEO CD
Video CDs are classified into two types, version 1.1 and 2.0. This unit can play not only discs of version 1.1, but also version
2.0 on which a Playback Control can be made.
Video CD, version 1.1: With the same operation as compact discs, you can enjoy sounds and pictures (movies).
Video CD, version 2.0: In addition to a normal play which is the same as discs of version 1.1, you can make a Playback
Control. (For details on Playback Control, refer to page 18.)
Type of disc
Video CD
CD
(including CD-G)
Mark printed
on the disc
Type of signal
recorded
Sound
+
Picture (Movie)
Sound
Sound
only
+
Still picture
Size (Dimension)
12 cm
8 cm (Single type)
12 cm
8 cm (Single type)
Maximum possible
play time
74 minutes
20 minutes
74 minutes
20 minutes
GRAPHICS
English
1 To ensure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 Install your unit in a cool, dry, clean place – away from
windows, heat sources, and too much vibration, dust,
moisture or cold. Avoid sources of hum (transformers,
motors). To prevent fire or electrical shock, do not expose
to rain or water.
3 Do not operate the unit upside-down. It may overheat,
possibly causing damage.
4 Never open the cabinet. If a foreign object drops into the
unit, contact your dealer.
5 This player should not be placed on appliances, such as
amplifiers, that produce heat, or placed in a cabinet that
impedes the flow or air. This may result in a failure in this
player. Install the player in a well ventilated place. In
addition, do not place objects on the player.
6 Do not use force on switches, knobs or cords. When
moving the set, first turn the unit off. Then gently
disconnect the power plug and the cords connecting to
other equipment. Never pull the cord itself.
7 Do not attempt to clean the unit with chemical solvents;
this might damage the finish. Use a clean, dry cloth.
8 Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that your unit
is faulty.
9 To prevent lightning damage, unplug the power cord and
remove the antenna cable during electrical storms.
10 The generated digital signals may interfere with other
equipment such as tuners or receivers. Move the system
farther away from such equipment if interference is
observed.
11 Voltage selector (General model only)
The voltage selector (on the rear panel of this unit)
must be correctly set to the voltage used locally
before making any connection to the AC power
supply.
This unit is designed for home use only. Do not use this
unit for business purposes.
NOTE:
Please check the copyright laws in your country before
recording from records, compact discs, radio, etc.
Recording of copyrighted material may infringe copyright
laws.
WARNING
To reduce the risk of fire or electric shock, do not expose this
unit to rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.
DANGER
Invisible laser radiation when open and interlock failed or
defeated.
Avoid direct exposure to beam.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
This compact disc player is
classified as a CLASS 1 LASER
product.
The CLASS 1 LASER
PRODUCT label is located on
the rear exterior. (China and
Singapore models)
Laser component in this product is capable of emitting
radiation exceeding the limit for Class 1.
CAUTION
As the laser beam used in this compact disc player is harmful
to the eyes, do not attempt to disassemble the cabinet. Refer
servicing to qualified personnel only.
Laser Diode Properties
• Material: GaAlAs
• Wavelength: 780nm
• Emission Duration: continuous
• Laser Output: max. 44.6µW*
* This output is the value measured at a distance of about
200mm from the objective lens surface on the Optical Pick-
up Block.
CAUTION FOR CARRYING THIS UNIT
Be sure not to carry or tip the unit with discs remaining in it.
CAUTION FOR MOVING THIS UNIT
When moving this unit, first remove all discs from the disc
tray and close the tray by pressing the OPEN/CLOSE
button, and then switch off the power after you confirm that
the display indicates as follows.
Never switch off the power if the display is not pictured as
above, otherwise the unit will break down during moving
because the internal mechanism is not locked.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
MUSICDISC
CLASS 1 LASER PRODUCT
3
VIDEO OUT
MODE
SELECT
AUTO
NTSCPAL
L
R
LINE OUT
VOLTAGE SELECTOR
VIDEO IN
CD
240V
110V
120V
220V
4
CONNECTIONS
●
Before making any connections, switch OFF the power to
this unit, the amplifier, the video monitor, etc.
●
Connections should be made to the correct input terminals
of the amplifier, the video monitor, etc.
●
If the placement of this unit causes interference to other
equipment, separate them from each other.
To AC outlet
This unit
(General model)
Amplifier
Video connection cord (included)
Connecting to the amplifier
Connect the LINE OUT terminals to the audio input terminals of
the amplifier (marked as “CD”, “AUX”, etc.) by using the
included audio connection cord.
Be sure that the left (“L”) and right (“R”) LINE OUT terminals
are connected to the corresponding (left and right) terminals of
the amplifier.
Connecting to the video monitor
Connect this unit’s VIDEO OUT terminal to the video input
terminal of the video monitor by using the included video
connection cord.
Audio connection
cord (included)
Video monitor
One or two microphones can be connected to this unit.
Moreover, if you have a Yamaha microphone which has a key
control function, connect the mini-plug connector cable of the
microphone to the KEY CONTROL jack of this unit. This
connection allows you to change key of source sound by using
controls on the microphone.
5
English
Microphone
Microphone
(with a key
control function)
This unit is designed for use with the NTSC and PAL television
formats. Set this switch to the position for the format your video
monitor employs.
PAL: Outputs signals in the PAL format no matter which
format (PAL or NTSC) the currently playing disc
employs.
Set to this position if your video monitor employs the
PAL format.
AUTO: Outputs signals in the same format as the currently
playing disc employs.
Set to this position if your video monitor can be
switched in between the PAL and NTSC formats
automatically.
NTSC: Outputs signals in the NTSC format no matter which
format (PAL or NTSC) the currently playing disc
employs.
Set to this position if your video monitor employs the
NTSC format.
Connecting microphones for singing Karaoke
Setting the VIDEO OUT MODE SELECT switch
ECHO
DISC SKIP
SKIP
/
SEARCH
PREV NEXT
6
7
89
0
LEVEL
KEY CONTROL
MIC 1 MIC 2
OPEN
/
CLOSE
STOP
/
RETURN
PLAY
/
SELECT
PLAYXCHANGE
MIN MAX MIN MAX
MODE
SELECT
AUTO
NTSCPAL
VIDEO OUT
1 Disc tray
Up to 5 discs can be loaded on the disc tray. Five disc-setting
positions on the disc tray are numbered from 1 to 5.
2 MPX button
Whenever this button is pressed, audio output mode changes.
The currently selected audio output mode is shown on the
display. (Refer to page 14 for details.)
3 KARAOKE button
When this button is pressed so that “KARAOKE” lights up on
the display, a pause is inserted each time a play of track ends.
Pressing this button once more will cancel this function.
4 KEY CONTROL buttons
These buttons are available when the Karaoke mode is
selected or a microphone is connected to this unit. Pressing
these buttons changes key of the track currently playing. The
current key level is shown on the display.
: Whenever pressed, key of the track becomes lower.
: Pressing this button restores the original key level of the
track.
: Whenever pressed, key of the track becomes higher.
5 DISC SKIP button(s)
Whenever this button is pressed, the disc tray rotates and the
selected disc changes. Pressing the side rotates the disc
tray clockwise and pressing the side rotates the disc tray
counterclockwise.
6
CONTROLS AND THEIR FUNCTIONS
FRONT PANEL
REMOTE CONTROL TRANSMITTER
ECHO
POWER
MPX
KARAOKE
KEY CONTROL DISC SKIP
SKIP
/
SEARCH
PREV NEXT
+10
12
34
56
7
89
0
LEVEL
KEY CONTROL
MIC 1 MIC 2
NATURAL SOUND VIDEO CD CHANGER
VIDEO CD
OPEN
/
CLOSE
STOP
/
RETURN
PLAY
/
SELECT
PLAYXCHANGE
MIN MAX MIN MAX
1 23 5 6 87 9 04
A E F HB C GD
KEY CONTROL
KARAOKE
MPX
OPEN/CLOSE
ON SCREEN
PROG
ENTER S/F REPCANCEL
1234 5
67890
+10
DISC SKIP
TIME INDEX
INDEX
SEARCH
SKIP
PREV
RETURN SELECT
NEXT
INTRODIGEST
PAUSESLOW
PLAY/REPEAT
STOP
2
S
7
9
R
8
5
D
4
3
I
J
L
Q
M
K
N
O
P
6
7
English
6 SKIP/SEARCH (PREV and NEXT) buttons
SKIP: Pressing this button locates the beginning of the next
track (or the currently playing track or the previous
track).
SEARCH:
Pressing and holding this button advances (or
reverses) the play rapidly.
PREV and NEXT:
Functions only when a Playback Control operation is
made on a Video CD, version 2.0. Pressing the NEXT
side selects the next display mode, and pressing the
PREV side restores the previous display mode.
* For some discs, this key operation will not function.
7 STOP/RETURN button
Stops playing a disc during a normal disc play. During a
Playback Control operation, press this button to return to a
previous screen menu mode.
When playing a Video CD, pressing this button for 2 seconds
or more calls a Playback Control mode.
8 PLAY/SELECT (PLAY/REPEAT) button
Pressing this button starts playing a Video CD, version 1.1 and
CD. If this button is pressed while playing a disc, play will
restart from the beginning of the track currently playing.
When this unit is in a Playback Control mode for Video CDs,
version 2.0, pressing this button selects a screen menu mode.
9 OPEN/CLOSE button
Opens and closes the disc tray.
0 PLAYXCHANGE button
Press this button to open and close the disc tray while playing
a disc. This is useful when you want to exchange discs while
playing another disc.
A POWER switch
Press this switch to switch the power on. Press it again to
switch the power off.
B Remote control sensor
Receives signals from the remote control transmitter.
C Display panel
See page 8.
D Numeric buttons
Used to select a track number.
E ECHO control
This control adjusts the level of echo applied to sound signals
input from the microphone(s) connected to this unit’s MIC
jacks.
F LEVEL control
This control adjusts the level of sound signals input from the
microphone(s) connected to this unit’s MIC jacks.
G MIC (1 and 2) jacks
One or two microphones can be connected to these jacks.
H KEY CONTROL jack
If you have a Yamaha microphone which has a key control
function, connect the mini-plug connector cable of the
microphone to this jack. This connection allows you to change
key of source sound by using controls on the microphone.
I PROG button
This button is available only when “KARAOKE” is illuminated
on the display. This button is used for programming tracks.
(Refer to page 15 for details.)
J CANCEL button
Used to cancel a programmed track. (Refer to page 16–17 for
details.)
K ENTER button
Used for programming tracks. (Refer to page 15 for details.)
L DIGEST button
Press this button to watch up to nine scenes of a track on a
Video CD. It gives you a quick overview of the track.
M INTRO button
Press this button to watch the beginning of all tracks on a
Video CD. It gives you a quick overview of what’s on the disc,
so that you can easily search for your favorites.
N TIME INDEX buttons
When you press these buttons during playback, you can skip
through tracks to locate your desired position. Pressing the
button once moves the location forward or backward. Pressing
it several times allows you to move by the displayed time.
(Refer to page 12 for details.)
O INDEX buttons
If the selected disc has index numbers, by pressing the or
button once or more, you can select a desired index
number and play the disc from that point.
P SLOW button
Plays a Video CD slowly. Press the PLAY button to return to
normal-speed playback.
Q PAUSE button
Suspends playback temporarily. Press the PLAY button to
return to normal-speed playback.
Pressing the PAUSE button during pause plays frames one by
one: this function is available only for Video CDs.
R ON SCREEN button
Press this button to turn on and off the status screen on the
video monitor. It gives you information about the current
operation status of this unit.
S S/F REP button
Whenever you press this button, repeat play mode changes.
The selected mode indication appears on the display for single-
track or full-disc repeat. It also allows you to turn off the mode.
8
DISPLAY PANEL
1 VIDEO CD indicator
Lights up when the selected disc is a Video CD.
2 KARAOKE indicator
Lights up when the KARAOKE function is turned on by
pressing the KARAOKE button, and goes off if the KARAOKE
button is pressed once more.
3 PROG indicator
Lights up when this unit is in the program play mode.
4 Disc number indicator (DISC)
Shows the disc number of selected disc.
5 Track number indicator (MUSIC)
Shows the selected track number.
6 Audio output mode indicators
The current audio output mode selected by pressing the MPX
button is shown by these indicators. (Refer to page 14 for
details.)
7 Time display
Shows elapsed time of the track currently playing, program
number and so on.
8 PBC (Playback Control) indicator
Lights up when this unit is in a Playback Control mode for
playing a Video CD, version 2.0.
9 Video signal output mode indicators
Show the current position of the VIDEO OUT MODE SELECT
switch on the rear panel and the format of video output signal.
0 Key level indicator
Shows the key level of the source currently playing in 13 steps.
: Lights up when the current key level is lower than the
original level of the track.
: Lights up when the current key level is the original level
of the track.
: Lights up when the current key level is higher than the
original level of the track.
MUSIC L R VCDISC
KARAOKE
VIDEO CD
PBC PROG
AUTO
NTSC PAL
12345 6 7
098
9
English
1 Turn the power on.
2 Open the disc tray and load discs.
3 Close the disc tray.
4 Start a disc play.
Play will begin from the first track of Disc 1 automatically.
* If you want to play a desired track on another disc, see
the next page.
Note
Additionally, you can close the disc tray by the following ways.
If the tray is closed by these ways, play will begin
automatically.
●
Press the PLAY/SELECT button. (Play will begin from the
first track of Disc 1.)
●
Press a numeric button.
●
Press the front edge of the disc tray gently. (Play will begin
from the first track of Disc 1.)
POWER
MPX
KARAOKE
+10
1
NATURAL SOUND VIDEO CD CHANGER
VIDEO CD
POWER
OPEN/CLOSE
OPEN/CLOSE
Label side
upward.
Disc tray
This unit stops at the beginning of the first track on the disc.
Notes
●
If the STOP/RETURN button is not pressed (except when
“KARAOKE” is illuminated on the display), play will not stop
until the last track on the last-numbered disc has been
played.
●
When you press the STOP button during Video CD
playback except in the Playback Control and Karaoke
modes, the unit stops five seconds before the playback
ends and displays the time. The unit is in the resume play
mode.
Pressing the PLAY button in the resume play mode starts
playing from the last playback position.
Pressing the STOP button again when the unit is in the
resume play mode cancels the resume play mode.
RETURN
STOP
BASIC OPERATIONS
This manual mainly describes how to operate this unit by using the remote control transmitter. To operate this unit from
the front panel, use the same named buttons on the front panel.
Loading discs and starting disc play
SELECT
PLAY/REPEAT
KEY CONTROL
KARAOKE
MPX
OPEN/CLOSE
ON SCREEN
PROG
ENTER S/F REPCANCEL
1234 5
67890
+10
DISC SKIP
TIME INDEX
INDEX
SEARCH
SKIP
PREV
RETURN SELECT
NEXT
INTRODIGEST
PAUSESLOW
PLAY/REPEAT
STOP
1
2, 3
4
STOP/
RETURN
To stop play
For information about the Playback Control operation for Video CDs, version 2.0, refer to pages 18–20.
1 If necessary, select a desired disc.
* If you want to play from the first track on the disc, press
the PLAY/REPEAT button.
2 Select a desired track number.
Selecting a track (by using the numeric
buttons)
For example:
To select track 5
Press “5”.
To select track 12
Press “+10”, then press “2”.
To select track 26
Press “+10” twice, then press “6”.
Note
If a track number higher than the highest track number on the
disc is selected, the last track on the disc will be played.
KARAOKE
MPX
ON SCREEN
PROG
ENTER S/F REPCANCEL
1234 5
67890
+10
DISC SKIPINTRODIGEST
10
Display information
➀
Shows the tray number of the selected disc.
➁
Shows the selected track number.
➂
Shows the elapsed time of the selected track.
Note
If a Video CD, version 2.0 is selected, “PBC” lights up on the
display. In this mode, disc play is controlled by the rule of
Playback Control. (If, however, you select a disc and a track
number continuously as explained above, “PBC” does not light
up automatically.) For details of Playback Control, refer to
pages 18–20.
To cancel this mode and restore the normal play mode, press
and hold the STOP/RETURN button for more than 2 seconds.
“PBC” disappears from the display.
To call the Playback Control mode again, press and hold the
STOP/RETURN button for more than 2 seconds.
It is possible to change between the modes only when the unit
stops.
MUSICDISC
VIDEO CD
AUTO
NTSC PAL
➂➁
➀
To play a desired track
DISC SKIP
KEY CONTROL
KARAOKE
MPX
OPEN/CLOSE
ON SCREEN
PROG
ENTER S/F REPCANCEL
1234 5
67890
+10
DISC SKIP
TIME INDEX
INDEX
SEARCH
SKIP
PREV
RETURN SELECT
NEXT
INTRODIGEST
PAUSESLOW
PLAY/REPEAT
STOP
12345
67890
+10
2
1
STOP/
RETURN
11
English
To advance rapidly
To reverse rapidly
•
The sound can be heard (although slightly garbled) during
manual search in either direction. This is convenient for
locating a precise position within a track, or for reviewing the
contents quickly.
•
Manual search can also be performed while disc play is
paused, though no sound will be heard.
•
When using the SKIP/SEARCH button on the front panel:
Be careful not to release the button just after it is pressed,
otherwise the play is skipped to the beginning of the next
track or returned to the beginning of the current track.
SEARCH
SEARCH
(press and hold)
To replay from the beginning of the
track currently playing
●
To play from the beginning of the track following the one
currently playing
●
To play from the beginning of the track currently playing
●
To play from the beginning of the track before the one
currently playing
(twice)
Notes
•
These operations can also be performed when the unit is in
the pause or stop mode.
•
When using the SKIP buttons on the remote control
transmitter:
If a button is pressed and held, the track number is
continuously changed to higher numbers (or lower
numbers).
When using the SKIP/SEARCH button on the front panel:
Be careful not to press and hold the button, otherwise the
selected track is played forward (or backward) rapidly.
To skip to the beginning of a desired
track
SKIP
PREV NEXT
SKIP
PREV NEXT
SKIP
PREV NEXT
To advance or reverse play rapidly
(Manual search)
(press and hold)
SELECT
PLAY/REPEAT
To suspend playback temporarily
Notes
●
Pressing the PAUSE button during pause plays frames one
by one. This function is available only for Video CDs.
●
To resume playback, press the PLAY button.
●
When a Video CD is played, you can make fine adjustments
to the paused position pressing the PAUSE button several
times. You can also switch to slow playback with the SLOW
button.
●
If playback pauses for 10 minutes, the operation stops
automatically to protect the internal mechanism.
PAUSE
Pressing the S/F REP button allows you to play any desired
track or disc repeatedly.
Whenever you press the button, the repeat play mode
indication appears on the display as follows:
Display indication Repeat play mode
Single repeat mode for playing a
track repeatedly
Full repeat mode for playing all
tracks on a disc repeatedly
Off (no repeat)
Notes
●
The single repeat mode overrides the program play mode.
Programmed playback cannot resume until this repeat mode
is turned off.
●
These repeat modes can work when playing all types of
CDs, Video CDs, version 1.1 and Video CDs, version 2.0.
However, they cannot work when playing Video CDs,
version 2.0 in the Playback Control mode.
12
To get a quick overview of a track
or a disc (for Video CDs only)
To watch scenes of a track on a Video CD
To watch the beginning of all tracks on a Video
CD
You can watch up to nine screens at a time on the video
monitor.
Notes
●
This button can work only for playing a Video CD.
●
These DIGEST and INTRO operations repeat endlessly until
you stop playback.
●
The monitor can show up to nine screens at a time. The
number of screens varies from disc to disc. There may be a
case that the monitor can show one screen only as follows:
To cancel DIGEST and INTRO operations
Press the STOP button.
Notes
●
This button can work only when playing a Video CD.
●
To return to normal-speed playback, press the PLAY button.
To play a Video CD slowly
To repeat playback
DIGEST
INTRO
SLOW
S/F REP
To skip through tracks forward or
backward
Pressing the TIME INDEX or button once allows you to
skip through the track backward or forward respectively by the
time shown on the display.
When you press a button several times in a short period of
time, the time to skip changes on the display. Releasing the
button moves the position by the displayed time before or
after. The skip operation varies as follows:
●
While you are playing a Video CD or CD, you can skip
forward or backward through the entire disc.
●
While you are playing programmed tracks in the Karaoke
mode, the skip is made forward or backward through the
entire disc including unprogrammed tracks.
●
While you are playing a Video CD, version 2.0 in the
Playback Control mode, you can skip forward or backward
through the selected track.
TIME INDEX
13
English
To monitor the operation status
Pressing the ON SCREEN button once shows the status
screen on the video monitor. You can easily monitor the
operations of this unit such as play, search, and stop. Pressing
the button again cancels this function.
Note
This function is not available for CDs.
To enter the KARAOKE mode
•
A pause is inserted each time a play of track ends. To begin
playing the next track, press the PLAY/REPEAT button.
While this unit is paused, “ : ” flashes on and off on the time
display.
•
In this mode, you can program tracks for singing Karaoke.
See page 15–17 for details.
•
Some adjustments can be made on this unit for enjoying
Karaoke. See page 14 for details.
Notes
•
If
“PBC” is illuminated on the display, pressing the KARAOKE
button to enter the Karaoke mode will cancel the Playback
Control mode (turn “PBC” off) and stop this unit.
•
If the pause mode is engaged for 10 minutes, the unit is
stopped automatically to protect the internal mechanism.
To cancel this function
Press the KARAOKE button again. “KARAOKE” disappears
from the display.
KARAOKE
KARAOKE
ON SCREEN
During play, you can open the disc tray by pressing the
PLAYXCHANGE button without interrupting disc play. In this
case, pressing the DISC SKIP button has no effect.
Note
You can load or replace discs on the tray when the disc tray is
opening, however, never load a disc on the recess hidden
inside the unit. In doing so, the disc and the unit may be
damaged, because the recess already has a disc, which is
being played.
Exchanging discs while playing
another disc
PLAYXCHANGE
ECHO
MPX
KARAOKE
KEY CONTROL DISC SKIP
SKIP
/
SEARCH
PREV NEXT
+10
12
34
56
7
89
0
LEVEL
KEY CONTROL
MIC 1 MIC 2
OPEN
/
CLOSE
STOP
/
RETURN
PLAY
/
SELECT
PLAYXCHANGE
MIN MAX MIN MAX
14
Pressing the KEY CONTROL buttons change key of the track
currently playing. The current key level is shown on the
display. Whenever a track changes, its original key level is
restored.
: Whenever pressed, key of the track becomes lower in 6
steps.
: Pressing this button restores the original key level of
the track.
: Whenever pressed, key of the track becomes higher in
6 steps.
Adjustments for enjoying Karaoke
You can select any of four audio output modes by pressing the
MPX button.
Turning the LEVEL control clockwise increases the level, and
counterclockwise decreases the level.
Turning the ECHO control clockwise increases the level, and
counterclockwise decreases the level.
If you need no echo effect, set this control to the “MIN”
position.
Display
indication
Audio output mode
Normal stereo output
Sound from the left channel only is
output from both the left and right
speakers.
Sound from the right channel only is
output from both the left and right
speakers.
Sound of vocals on the source is
attenuated.
Note: There may be a case that
vocals cannot be attenuated
effectively according to a source.
In this mode, if a microphone is
connected to this unit, the “VC”
indication blinks. When you sing to
the microphone, vocal sound on the
source is attenuated. When the
microphone does not sense your
vocal, vocal sound on the source is
output.
LR
L
R
VC
LEVEL
MIN MAX
ECHO
MIN MAX
MPX
KEY CONTROL
KEY CONTROL
KARAOKE
MPX
OPEN/CLOSE
ON SCREEN
PROG
ENTER S/F REPCANCEL
1234 5
67890
+10
KEY
CONTROL
MPX
MPX KEY CONTROL ECHO LEVEL
Adjusting key of the track
currently playing
Changing audio output mode
Adjusting the level of sound signals
input from the microphone(s)
Adjusting the level of echo
applied to sound signals
input from the microphone(s)
1 Load discs on the disc tray.
2 Press the KARAOKE button so that “KARAOKE” lights
up on the display. To cancel it, press the KARAOKE
button once again.
3
4 Select the disc (before “DISC” and “MUSIC” stop
flashing on the display).
5 Select the track (before “DISC” and “MUSIC” stop
flashing on the display).
6
7 To start play, press the PLAY/REPEAT button.
* This unit pauses whenever a play of track ends. To start
playing the next track, press the PLAY/REPEAT button.
8 Repeat step 3–6 to program more selections.
9 If necessary, change the audio output mode by pressing
the MPX button.
Use the KEY CONTROL buttons and the LEVEL and
ECHO controls as you prefer. (See page 14 for details.)
Notes
●
In step 4 or 5, if “DISC” and “MUSIC” stop flashing on the
display before you finish programming a track, press the
PROG button again.
●
If you program a track number which is higher than the
highest track number on the disc, “E rr” appears on the
display and it cannot be programmed.
●
This unit can store as many as 10 selections at one time. If
you program a track number as the eleventh program, the
tenth program is replaced with it.
ECHO
DISC SKIP
SKIP
/
SEARCH
PREV NEXT
7
89
0
LEVEL
KEY CONTROL
MIC 1 MIC 2
OPEN
/
CLOSE
STOP
/
RETURN
PLAY
/
SELECT
PLAYXCHANGE
MIN MAX MIN MAX
15
English
PRE-PROGRAMMING SELECTIONS
(FOR SINGING KARAOKE)
● Programming is possible either while the unit is playing a
disc or stopped.
● As many as 10 selections can be stored at one time.
KEY CONTROL
KARAOKE
MPX
OPEN/CLOSE
ON SCREEN
PROG
ENTER S/F REPCANCEL
1234 5
67890
+10
DISC SKIP
TIME INDEX
INDEX
SEARCH
SKIP
PREV
RETURN SELECT
NEXT
INTRODIGEST
PAUSESLOW
PLAY/REPEAT
STOP
12345
67890
+10
SELECT
PLAY/REPEAT
PROG
DISC SKIP
KARAOKE
KARAOKE
MUSIC L RDISC
ENTER
5
9
2
6
7
3
9
4
Flashes.
9
Display information during programming
➀
Shows the program number for the track to be programmed
next.
➁
Shows the selected disc and track number.
1
The disc number, the track number and the program
number of the last selection will flash on the display.
2
Each time the SKIP button is pressed, the disc
numbers, the track numbers and sequential order of the
programmed tracks can be checked one after another.
The display of the track number can be returned
(sequentially in reverse order) by pressing the SKIP
button.
3 When the check is completed;
To correct the selection currently playing
There are two methods, as described below.
1) Select the track to replace the one currently playing by using
the DISC SKIP button and the numeric buttons.
2) Select the track to replace the one currently playing by using
the DISC SKIP button and the SKIP buttons.
16
To check program data
KEY CONTROL
KARAOKE
MPX
OPEN/CLOSE
ON SCREEN
PROG
ENTER S/F REPCANCEL
1234 5
67890
+10
DISC SKIP
TIME INDEX
INDEX
SEARCH
SKIP
PREV
RETURN SELECT
NEXT
INTRODIGEST
PAUSESLOW
PLAY/REPEAT
STOP
CANCEL
SKIP
PREV NEXT
CANCEL
Numeric
buttons
DISC SKIP
2
1, 3
MUSIC L RDISC
KARAOKE
VIDEO CD
PROG
AUTO
MUSIC L RDISC
KARAOKE
VIDEO CD
PROG
AUTO
➀
➁
1
The disc number and the track number of the last
selection will flash on the display.
2
Display the disc number and the track number to be
canceled.
3
Press once while the number is flashing.
17
English
Notes
●
The SEARCH buttons can be used during play to search all
tracks including tracks not programmed.
●
When programs consist of tracks from more than one disc, if
you change a disc by using the PLAYXCHANGE button, the
programmed track on the removed disc is replaced by the
same numbered track on the new disc.
If the same number of the programmed track does not exist
on the new disc, the program will substitute the highest-
numbered track on the new disc.
EXAMPLE:
Program
Swap disc 4 (new disc has 9 tracks only)
Disc 1, Track 5 Disc 1, Track 5
Disc 2, Track 8 Disc 2, Track 8
Disc 4, Track 12 Disc 4, Track 9
To cancel a programmed selection
To cancel the selection you are currently
programming
There are two methods, as described below.
1) Press the CANCEL button instead of the ENTER button
after the track number is selected.
2) If about 30 seconds pass with no operation after the track
number is selected, the track will not be programmed.
To cancel all program data
Switch off the power.
CANCEL
SKIP
PREV NEXT
ENTER
KEY CONTROL
KARAOKE
MPX
OPEN/CLOSE
ON SCREEN
PROG
ENTER S/F REPCANCEL
1234 5
67890
+10
DISC SKIP
TIME INDEX
INDEX
SEARCH
SKIP
PREV
RETURN SELECT
NEXT
INTRODIGEST
PAUSESLOW
PLAY/REPEAT
STOP
2
13
18
PLAYBACK CONTROL OF VIDEO CD (Ver. 2.0)
This function is available for Video CDs, version 2.0 only.
“PBC” will light up on the display when a version 2.0 disc is
used.
The Playback Control differs with each disc. This section gives
a basic explanation of Playback Control. Refer to the
instruction manual for the disc for details.
Playback Control provides you with two types of new playback
enjoyment.
Playback selection on a screen menu
You can select pictures, music and information to play back by
selecting items on a screen menu. (Similar to having a
conversation.)
Playback of high quality pictures
You can enjoy watching pictures which are four times higher in
quality than moving pictures.
A Flowchart of Playback Control (as an example)
Mode just after the
disc is selected
Playback ends.
Movie
Movie
Movie
Movie
Movie
Picture
Picture
Picture Picture
Picture
Picture
Picture
Picture
Picture
Picture
Picture
Screen
menu
Screen
menu
1
1
12
NEXT
PREV
34
2
2
3
Picture Picture
RETURN
RETURN
RETURN
RETURN RETURN
19
English
1 Stop this unit and select a Video CD (version. 2.0).
2
A screen menu appears.
* Some discs show several short movies
sequentially instead of a menu.
3 Select the number of item you want to play.
* If the disc shows several short movies
sequentially, press the PLAY/REPEAT button
when a desired picture appears.
4 Play starts, or another menu appears. If another menu
appears, repeat step 3.
(Some discs have more than one screen menu.)
5 If “NEXT” or “ ” appears on the screen during play,
pressing the NEXT button will change to the next menu.
If “PREV” or “ ” appears on the screen during play,
pressing the PREV button will restore the previous
menu.
6 If the play has finished, press the STOP/RETURN
button once or more to return to a previous mode.
To select a number higher than 9 in step 3
Example)
•
To select number 15
Press “+10” and “5” in succession.
•
To select number 26
Press “+10” twice, then press “6”.
Basic operation
Note
Disc play in the Playback Control mode depends on the data of
the disc used. So, according to the contents of disc, the
following operating method may not be applied to the disc.
Be sure to refer to the instruction manual for the disc.
Before operation
If “KARAOKE” is illuminated on the display, press the
KARAOKE button to cancel it.
(When “KARAOKE” is illuminated, a Playback Control
operation cannot be made.)
DISC SKIP
SELECT
PLAY/REPEAT
12345
67890
+10
SELECT
PLAY/REPEAT
SKIP
PREV NEXT
SKIP
PREV NEXT
RETURN
STOP
KEY CONTROL
KARAOKE
MPX
OPEN/CLOSE
ON SCREEN
PROG
ENTER S/F REPCANCEL
1234 5
67890
+10
DISC SKIP
TIME INDEX
INDEX
SEARCH
SKIP
PREV
RETURN SELECT
NEXT
INTRODIGEST
PAUSESLOW
PLAY/REPEAT
STOP
3
5
6
2, 3
1
20
To return to a previous screen
mode during play
If the disc has index numbers
To stop play
Pressing the INDEX or button once or more searches
for and select any index number. Play starts from the point of
selected index number.
Press once.
* To return to the first screen mode, press the STOP/RETURN
button repeatedly until the first screen mode appears.
Press and hold for more than
2 seconds.
To play a Video CD (ver. 2.0) without
Playback Control operation
Press and hold the STOP/RETURN button for more than 2
seconds when this unit is stopped. “PBC” disappears from the
display, and this unit turns into a normal play mode.
To restore the Playback Control mode again, press and hold
the STOP/RETURN button for more than 2 seconds.
RETURN
STOP
RETURN
STOP
RETURN
STOP
INDEX
Note
When you press the DISC SKIP button or a numeric button to
select a desired track in the Playback Control mode, the unit
cancels the mode and starts playing the selected track.
Sivu latautuu...
Sivu latautuu...
Sivu latautuu...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
muilla kielillä
- polski: Yamaha VCD-102K Instrukcja obsługi
- Türkçe: Yamaha VCD-102K Kullanım kılavuzu
- English: Yamaha VCD-102K User manual
- čeština: Yamaha VCD-102K Uživatelský manuál
- svenska: Yamaha VCD-102K Användarmanual
- русский: Yamaha VCD-102K Руководство пользователя
- italiano: Yamaha VCD-102K Manuale utente
- Deutsch: Yamaha VCD-102K Benutzerhandbuch
- português: Yamaha VCD-102K Manual do usuário
- dansk: Yamaha VCD-102K Brugermanual
- français: Yamaha VCD-102K Manuel utilisateur
- español: Yamaha VCD-102K Manual de usuario
- Nederlands: Yamaha VCD-102K Handleiding
- română: Yamaha VCD-102K Manual de utilizare