Yamaha DTX400K Omistajan opas

Merkki: Yamaha

Malli: DTX400K

Luokka: Music drums

Tyyppi: Omistajan opas

Tämä ohje sopii myös

DTX400K/DTX430K/DTX450K Owner’s Manual

Owner’s Manual

DTX400K

DTX430K

DTX450K

ELECTRONIC DRUM KIT

DTX400K/DTX430K/DTX450K Owner’s Manual

Contents

PRECAUTIONS ............................................ 4

Welcome....................................................... 6

Product Manuals ......................................... 6

Setup

First Steps.................................................... 7

Package Contents ....................................... 8

Assembly Guide .........................................11

Setting Up for Sound ................................ 19

Connecting the Power..................................... 19

Connecting Headphones or Speakers ............ 19

Connecting a Music Player ............................. 19

Turning On the Drum Module.......................... 20

Turning Off the Drum Module.......................... 20

Auto Power-Off ................................................ 20

Restoring the Default Settings (Factory Set) ... 20

Component Names & Functions.............. 21

Control Panel .................................................. 21

Left Side.......................................................... 22

Right Side ....................................................... 22

Basic Techniques

Selecting & Playing a Kit .......................... 23

Selecting a Kit ................................................. 23

Adjusting Kit Sensitivity................................... 23

Playing Techniques................................... 24

Snare Pad ....................................................... 24

Hi-hat Cymbal ................................................. 24

Performing with a Song ............................ 25

Selecting a Song............................................. 25

Adjusting the Song Volume............................. 25

Adjusting the Volume of Muted Drum Parts .... 26

Looping Part of a Song ................................... 26

Using the Metronome ............................... 27

Starting and Stopping the Metronome ............ 27

Adjusting the Metronome Volume ................... 27

Confirming Tempo via Number Buttons .......... 27

Confirming Tempo via Voice Guidance ........... 27

Adjusting the Tempo ....................................... 28

Other Settings ................................................. 28

Practicing in Training Mode ......................29

Basic Training Mode Procedure....................... 29

1. Groove Check .............................................. 30

2. Rhythm Gate ............................................... 31

3. Measure Break............................................ 32

4. Tempo Up/Down..........................................33

5. Change Up .................................................. 34

6. Easy Session ..............................................35

7. Groove Tracker............................................. 36

8. Pad Gate ..................................................... 37

9. Part Mute.....................................................38

10. Fast Blast................................................... 39

Advanced Techniques

Setting Parameters using Menu Mode..... 40

Basic Menu Mode Procedure ..........................40

z Metronome Settings....................................41

x Kit Settings.................................................. 42

c MIDI Settings .............................................. 44

v Hi-hat Settings ............................................ 45

b Trigger Settings...........................................46

n Training Settings .........................................49

m Other Settings.............................................53

Integrating Separately Sold Accessories

..56

For DTX400K Owners .....................................56

For DTX430K & DTX450K Owners ................. 56

Connecting to a Computer........................57

Making Connections........................................57

MIDI Reference Manual .................................. 57

Reference

Troubleshooting......................................... 58

Data List .....................................................60

Specifications ............................................64

Index ........................................................... 65

DTX400K/DTX430K/DTX450K Owner’s Manual

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply (adapter). DO

NOT connect this product to any power supply or adapter other than one

described in the manual, on the name plate, or specifically recommended

by Yamaha.

This product should be used only with the components supplied or; a

cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is

used, please observe all safety markings and instructions that accom-

pany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be correct at the

time of printing. However, Yamaha reserves the right to change or modify

any of the specifications without notice or obligation to update existing units.

This product, either alone or in combination with an amplifier and head-

phones or speaker/s, may be capable of producing sound levels that could

cause permanent hearing loss. DO NOT operate for long periods of time at

a high volume level or at a level that is uncomfortable. If you experience

any hearing loss or ringing in the ears, you should consult an audiologist.

IMPORTANT: The louder the sound, the shorter the time period

before damage occurs.

NOTICE:

Service charges incurred due to a lack of knowledge relating to how a

function or effect works (when the unit is operating as designed) are not

covered by the manufacturer’s warranty, and are therefore the owners

responsibility. Please study this manual carefully and consult your dealer

before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe and environ-

mentally friendly. We sincerely believe that our products and the production

methods used to produce them, meet these goals. In keeping with both the

letter and the spirit of the law, we want you to be aware of the following:

Battery Notice:

This product MAY contain a small non-rechargeable battery which (if

applicable) is soldered in place. The average life span of this type of bat-

tery is approximately five years. When replacement becomes necessary,

contact a qualified service representative to perform the replacement.

This product may also use “household” type batteries. Some of these may

be rechargeable. Make sure that the battery being charged is a recharge-

able type and that the charger is intended for the battery being charged.

When installing batteries, never mix old batteries with new ones, and

never mix different types of batteries. Batteries MUST be installed cor-

rectly. Mismatches or incorrect installation may result in overheating and

battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep all batter-

ies away from children. Dispose of used batteries promptly and as regu-

lated by the laws in your area. Note: Check with any retailer of household

type batteries in your area for battery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for some reason

its useful life is considered to be at an end, please observe all local,

state, and federal regulations that relate to the disposal of products that

contain lead, batteries, plastics, etc. If your dealer is unable to assist you,

please contact Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The model num-

ber, serial number, power requirements, etc., are located on this plate.

You should record the model number, serial number, and the date of pur-

chase in the spaces provided below and retain this manual as a perma-

nent record of your purchase.

Model

Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

92-BP (bottom)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained

in this manual, meets FCC requirements. Modifications not expressly

approved by Yamaha may void your authority, granted by the FCC, to

use the product.

2. IMPORTANT: When connecting this product to accessories and/or

another product use only high quality shielded cables. Cable/s sup-

plied with this product MUST be used. Follow all installation instruc-

tions. Failure to follow instructions could void your FCC authorization

to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the

requirements listed in FCC Regulations, Part 15 for Class “B” digital

devices. Compliance with these requirements provides a reasonable

level of assurance that your use of this product in a residential envi-

ronment will not result in harmful interference with other electronic

devices. This equipment generates/uses radio frequencies and, if not

installed and used according to the instructions found in the users

manual, may cause interference harmful to the operation of other

electronic devices. Compliance with FCC regulations does not guar-

antee that interference will not occur in all installations. If this product

is found to be the source of interference, which can be determined by

turning the unit “OFF” and “ON”, please try to eliminate the problem by

using one of the following measures:

Relocate either this product or the device that is being affected by the

interference.

Utilize power outlets that are on different branch (circuit breaker or

fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna.

If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to

co-axial type cable.

If these corrective measures do not produce satisfactory results,

please contact the local retailer authorized to distribute this type of

product. If you can not locate the appropriate retailer, please contact

Yamaha Corporation of America, Electronic Service Division, 6600

Orangethorpe Ave, Buena Park, CA90620

The above statements apply ONLY to those products distributed by

Yamaha Corporation of America or its subsidiaries.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

FCC INFORMATION (U.S.A.)

Responsible Party : Yamaha Corporation of America

Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620

Telephone : 714-522-9011

Type of Equipment : ELECTRONIC DRUM KIT

Model Name : DTX400K/DTX430K/DTX450K

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received including interfer-

ence that may cause undesired operation.

See user manual instructions if interference to radio reception is suspected.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (FCC DoC)

COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE)

DTX400K/DTX430K/DTX450K Owner’s Manual

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the

following:

• Do not place the power cord near heat sources such as heaters or radiators. Also,

do not excessively bend or otherwise damage the cord, or place heavy objects on it.

• Only use the voltage specified as correct for the instrument. The required voltage

is printed on the name plate of the instrument.

• Use the specified adaptor (page 64) only. Using the wrong adaptor can result in

damage to the instrument or overheating.

• Check the electric plug periodically and remove any dirt or dust which may have

accumulated on it.

• Under no circumstances should any of the components of this product be taken apart

or customized. Doing so could result in electric shock, fire, injury, or malfunction.

• Do not sit or stand on the rack. Doing so could cause it to fall over or break,

possibly causing injury.

• Be careful with the holders for cymbal and tom pads as they have sharp tips. In

order to avoid injury, therefore, you should take special care whenever handling

these components.

• Be careful with the anti-slip stoppers on kick pads and foot pedals as they have

sharp tips. In order to avoid injury, therefore, you should take special care

whenever handling these components.

• Securely tighten fixing nuts and other fasteners. In addition, be sure to immediately

tighten any nuts that have come loose. If this precaution is not observed, pads may

fall off or the rack may collapse or fall over, possibly causing injury.

• Take care when setting up cables. If anyone were to trip on a cable, the instrument

could topple over and cause injury.

• Do not expose the instrument to rain, use it near water or in damp or wet conditions,

place on it any containers (such as vases, bottles or glasses) containing liquids

which might spill into any openings. If any liquid such as water seeps into the

instrument, turn off the power immediately and unplug the power cord from the AC

outlet. Then have the instrument inspected by qualified Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit. A burning item may fall

over and cause a fire.

• When one of the following problems occur, immediately turn off the power switch

and disconnect the electric plug from the outlet. Then have the device inspected by

Yamaha service personnel.

- The power cord or plug becomes frayed or damaged.

- It emits unusual smells or smoke.

- Some object has been dropped into the instrument.

- There is a sudden loss of sound during use of the instrument.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

• Do not connect the instrument to an electrical outlet using a multiple-connector.

Doing so can result in lower sound quality, or possibly cause overheating in the

outlet.

• When removing the electric plug from the instrument or an outlet, always hold the

plug itself and not the cord. Pulling by the cord can damage it.

• Remove the electric plug from the outlet when the instrument is not to be used for

extended periods of time, or during electrical storms.

• Read carefully the attached documentation explaining the assembly process.

Failure to assemble the instrument in the proper sequence might result in damage

to the instrument or even injury.

• Do not place hands or feet under a foot switch or foot pedal. Doing so could result

in injury.

• Do not use the electronic drum kit’s rack to hold acoustic drums. Doing so could

cause clamps to break and the drums to fall off, which in turn could lead to injury.

• Mind your fingers when adjusting clamps. Fingers can easily be caught and

crushed if care is not taken during this operation.

• Be careful with the tips of supports, arms, screws, and the like. Fingers can easily

be injured by sharp tips if these components are not handled carefully.

• Do not place the instrument in an unstable position where it might accidentally fall

over.

• Before moving the instrument, remove all connected cables, to prevent damage to

the cables or injury to anyone who might trip over them.

Power supply/AC power adaptor

Assembly

Water warning

Fire warning

If you notice any abnormality

Power supply/AC power adaptor

Assembly

Location

DMI-5 1/2

DTX400K/DTX430K/DTX450K Owner’s Manual

• When setting up the product, make sure that the AC outlet you are using is easily

accessible. If some trouble or malfunction occurs, immediately turn off the power

switch and disconnect the plug from the outlet. Even when the power switch is

turned off, electricity is still flowing to the product at the minimum level. When

you are not using the product for a long time, make sure to unplug the power cord

from the wall AC outlet.

• Use only the stand/rack specified for the instrument. When attaching the stand or

rack, use the provided screws only. Failure to do so could cause damage to the

internal components or result in the instrument falling over.

• Before connecting the instrument to other electronic components, turn off the

power for all components. Before turning the power on or off for all components,

set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum levels and

gradually raise the volume controls while playing the instrument to set the desired

listening level.

• Do not insert a finger or hand in any gaps on the instrument.

• Never insert or drop paper, metallic, or other objects into the gaps on the panel.

This could cause physical injury to you or others, damage to the instrument or

other property, or operational failure.

• Do not rest your weight on, or place heavy objects on the instrument, and do not

use excessive force on the buttons, switches or connectors.

• Do not use the instrument/device or headphones for a long period of time at a high

or uncomfortable volume level, since this can cause permanent hearing loss. If

you experience any hearing loss or ringing in the ears, consult a physician.

Always turn the power off when the instrument is not in use.

Even when the [ ] (Standby/On) switch is in standby status (power lamp is off), electricity is still flowing to the instrument at the minimum level.

When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.

NOTICE

To avoid the possibility of malfunction/damage to the prod-

uct, damage to data, or damage to other property, follow

the notices below.

 Handling and Maintenance

• Do not use the instrument in the vicinity of a TV, radio,

stereo equipment, mobile phone, or other electric

devices. Otherwise, the instrument, TV, or radio may

generate noise.

• Do not expose the instrument to excessive dust or vibra-

tions, or extreme cold or heat (such as in direct sunlight,

near a heater, or in a car during the day) to prevent the

possibility of panel disfiguration, damage to the internal

components or unstable operation. (Verified operating

temperature range: 5° – 40°C, or 41° – 104°F.)

• Do not place vinyl, plastic or rubber objects on the

instrument, since this might discolor the panel or key-

board.

• When cleaning the drum module, be sure to use a clean,

dry cloth. Cleaning products that contain organic sol-

vents, paint thinner, detergents, and chemically-treated

cleaning cloths can cause discoloration and/or warping

and should not be used.

• When cleaning the pads, avoid cleaning products that

contain organic solvents, paint thinner, and alcohol as

they can cause discoloration and/or warping. Instead,

we recommend that you remove dust using a soft dry

cloth or wipe clean with a moist, tightly-wrung-out cloth.

If a pad is very dirty, wipe the dirt away using a cloth

moistened with a neutral detergent solution and tightly

wrung out. Following this, wipe away the detergent solu-

tion using a cloth soaked in water and tightly wrung out.

Information

 About copyrights

• Copying of the commercially available musical data including but

not limited to MIDI data and/or audio data is strictly prohibited

except for your personal use.

• This product incorporates and bundles computer programs and

contents in which Yamaha owns copyrights or with respect to

which it has license to use others’ copyrights. Such copyrighted

materials include, without limitation, all computer software, style

files, MIDI files, WAVE data, musical scores and sound record-

ings. Any unauthorized use of such programs and contents out-

side of personal use is not permitted under relevant laws. Any

violation of copyright has legal consequences. DON’T MAKE,

DISTRIBUTE OR USE ILLEGAL COPIES.

 About this manual

• The illustrations as shown in this manual are for instructional

purposes only, and may appear somewhat different from those

on your instrument.

• The company names and product names in this manual are the

trademarks or registered trademarks of their respective compa-

nies.

Connections

Handling caution

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.

 Optional Pads

Within this Owner’s Manual, the optional external pads that may be connected to the drum module are referred to by

model name. Please note that these model names were up-to-date as of printing of this manual. Details regarding any

subsequently released models will be made available via the following web site.

http://www.yamaha.com/

DMI-5 2/2

DTX400K/DTX430K/DTX450K Owner’s Manual

Welcome

First of all, thank you for purchasing a Yamaha DTX400K, DTX430K, or DTX450K

Electronic Drum Kit. In order to get the most out of your new instrument, please be

sure to read this owner’s manual carefully. And after doing so, be sure to store it in a

safe place so that you can refer back to it again as needed.

Product Manuals

The DTX400K, DTX430K, and DTX450K are described in the following two manuals.

 Owner’s Manual (this booklet)—Setup, Basic Techniques, Advanced Techniques,

and Reference sections.

Describes how to assemble your electronic drum kit and get it set up for playing.

Describes the basic techniques used when operating and playing the electronic drum kit.

Describes the setting of parameters and other more advanced modes of use.

Describes troubleshooting techniques and contains other reference materials.

 MIDI Reference Manual (pdf)

* Not bundled with this product.

The drum module’s MIDI Reference Manual contains the following. See page 57 for more details.

• MIDI-related reference information

• Reference material that will prove useful when making music using the drum module and a computer

• Instructions on how to transfer songs from your computer to the drum module

 Using PDF Manuals

The Reference Manual for your DTX400K, DTX430K, or DTX450K is made available in digital format as a

PDF document. As such, a computer and suitable software will be required in order to read it. We recommend

that Adobe® Reader® be used for this purpose as it allows you to quickly and easily search for keywords, to

print out specific sections, and to conveniently jump from page to page by clicking embedded links. Keyword

searching and link-based navigation in particular are extremely useful functions available only with digital-

type documents.

The most-recent version of Adobe® Reader® can be downloaded from the following web page.

http://www.adobe.com/products/reader/

Setup

Basic Techniques

Advanced Techniques

Reference

Setup

DTX400K/DTX430K/DTX450K Owner’s Manual

First Steps

Open the box and confirm that all parts are present

and correct.

Assemble the parts.

• The assembly process is described in detail on pages 8 through

18.

Make the necessary connections.

• Connect the pads to the drum module using the cables provided.

 See page 18.

• Connect the power adaptor to the drum module and turn on the

module.

 See page 19.

Play your electronic drum kit.

• Basic techniques used when operating and playing the electronic

drum kit are described in the Basic Techniques section (pages 23

to 39).

• More complex methods are described in the Advanced Tech-

niques section (pages 40 to 55).

Setup

DTX400K/DTX430K/DTX450K Owner’s Manual

Package Contents

After opening up the package containing your electronic drum kit, please verify that all of the follow-

ing parts are present.

For DTX400K Owners

•Parts !6, !7, and !8 are contained in Box 1.

•Parts !0 and !1 are contained in Box 2.

• The DTX400K does not have any parts numbered u, o, or !3.

•Parts !4 and !5 are almost identical in appearance but are actually different. They can be told apart by the sticker on the base sec-

tion.

•Parts e and i are almost identical in appearance but are actually different. Part i has a wing bolt, but part e does not. In addi-

tion, the polystyrene foam packaging used for part e is marked “T” (tom); while the packaging for part i is marked “S” (snare).

q Base supports (x2) w Vertical supports (x2) e Third tom part (x1)

r Left arm (x1) t Drum module (x1) y First/second tom part (x1)

Third tom pad

First tom pad Second tom pad

i Snare pad (x1) !0 Cymbal holders (x2) !1 Hi-hat holder (x1)

Rear side

Wing bolt

!2 Cymbal/hi-hat pads (x3) !4 Hi-hat controller (x1) !5 KU100 Kick Unit (x1)

!6 Nine-channel snake cable (x1) !7 Tuning key (x1) !8 Cable bands (x3)

!9 Power adaptor (x1) @0 Owner’s Manual (this booklet)

* May not be included depending on your

particular area. Please check with your

Yamaha dealer.

Package Contents

DTX400K/DTX430K/DTX450K Owner’s Manual

For DTX430K Owners

•Parts !6, !7, and !8 are contained in Box 1.

•Parts !0 and !1 are contained in Box 2.

• The DTX430K does not have any parts numbered u or o.

q Base supports (x2) w Vertical supports (x2) e Third tom part (x1)

t Drum module (x1) y First/second tom part (x1)

!0 Cymbal holders (x2) !1 Hi-hat holder (x1)

!2 Cymbal/hi-hat pads (x3) !3 KP65 Kick Pad (x1) !4 HH65 Hi-hat Controller (x1)

r Left arm (x1)

i Snare pad (x1)

!5 FP6110A Foot Pedal (x1) !6 Nine-channel snake cable (x1) !7 Tuning key (x1)

!8 Cable bands (x3) !9 Power adaptor (x1) @0 Owner’s Manual (this booklet)

* May not be included depending on your

particular area. Please check with your

Yamaha dealer.

Third tom pad

First tom pad Second tom pad

Package Contents

DTX400K/DTX430K/DTX450K Owner’s Manual

For DTX450K Owners

•Parts o, !6, !7, and !8 are contained in Box 1.

•Parts u, !0, and !1 are contained in Box 2.

q Base supports (x2) w Vertical supports (x2) e Third tom part (x1)

t Drum module (x1) y First/second tom part (x1)

!0 Cymbal holders (x2) !1 Hi-hat holder (x1) !2 Cymbal/hi-hat pads (x3)

!3 KP65 Kick Pad (x1) !4 HH65 Hi-hat Controller (x1)

r Left arm (x1)

!5 FP6110A Foot Pedal (x1)

!6 Nine-channel snake cable (x1) !7 Tuning key (x1) !8 Cable bands (x3)

!9 Power adaptor (x1) @0 Owner’s Manual (this booklet)

* May not be included depending on your

particular area. Please check with your

Yamaha dealer.

Third tom pad

First tom pad Second tom pad

i TP70S Snare Pad (x1) o S wing bolt (x1)u Hexagonal rod (x1)

Setup

DTX400K/DTX430K/DTX450K Owner’s Manual

Assembly Guide

Preparing the base

supports

1. Take the two base supports (q) and the tuning key (!7)

from the package, and using the tuning key, securely

tighten the s key bolts (i.e., the key bolts labeled s in

the figure).

2. Using the tuning key, loosen the  key bolt on each of

the two base supports (q).

3. Viewing from the front as shown in the figure, place the

base supports (q) at the left and right approximately 50

cm apart.

Attaching the verti-

cal supports

1. Take a vertical support (w) from the package, and

insert it fully into the joint on the left base support.

2. Using the tuning key, tighten the  key bolt that you

loosened in in order to secure the vertical sup-

port (w) in place.

3. Repeat 1. and 2. to assemble the right upright bar.

Fully assembled drum kit

(DTX450K shown)

CAUTION

• Choose a flat, hard surface on

which to assemble your elec-

tronic drum kit.

• Take care to avoid mixing up

parts or assembling them in the

wrong direction. In addition, the

assembly steps should be com-

pleted one at a time in the order

described.

• The assistance of at least one

other person will be required

when assembling the electronic

drum kit.

• Once a piece has been assem-

bled, be sure to tighten the cor-

responding nuts or bolts.

• To disassemble your electronic

drum kit, carry out the assembly

sequence in reverse.

Step 5

Step 10

Step 8

Step 4

Step 7

Step 6

Step 11

Step 9

Step 3

Step 2

Step 1

The two base supports are identical.

Step 1

50 cm

Front

NOTE

The two vertical supports are identical.

CAUTION

After completing this step, lay the assembly down

safely to prevent it from falling over.

Step 2

Joint

Left

Right

NOTE

Step 1

Assembly Guide

DTX400K/DTX430K/DTX450K Owner’s Manual

Attaching the third

tom part

1. Take the third tom part (e) from the package, and

using the tuning key, securely tighten the s key bolt.

2. Loosen the  key bolt.

3. Slide the third tom part (e) onto the right vertical sup-

port and lower it to the center of the support or there-

abouts. Ensure that the third tom pad is oriented as

shown in the above figure at this time.

4. Tighten the  key bolt to secure the third tom part (e)

in place.

Attaching the left

arm

1. Take the left arm (r) from the package, and using the

tuning key, securely tighten the s key bolt.

2. Loosen the  key bolt.

3. Slide the left arm (r) onto the left vertical support and

lower it to the center of the support or thereabouts.

Ensure that the left arm is oriented as shown in the

above figure at this time.

4. Tighten the  key bolt to secure the left arm (r) in

place.

Attaching the drum

module

1. Take the drum module (t) from the package and

loosen the

 key bolt.

2. Slide the drum module (t ) onto the left vertical sup-

port and lower it to a position about 10 cm from the top.

The angle at which the module should be assembled is

shown in the figure.

3. Tighten the  key bolt to secure the drum module (t)

in place.

IMPORTANT

The third tom part (e) and the snare part (i) from the

DTX400K are almost identical in appearance, and special

care should be taken to avoid mixing them up during the

assembly process. To tell them apart, look for the wing

bolt, which is only found on part i. See the figure on

page 8 for more details.

Care should be taken to avoid assembling the third tom pad

upside-down or back-to-front.

CAUTION

After completing this step, lay the assembly down

safely to prevent it from falling over.

The third tom pad will be rotated into place in .

Step 3

Rear of third tom pad

Right vertical support

NOTE

Step 12

The joint shown in the figure is not part of the DTX400K.

CAUTION

After completing this step, lay the assembly down

safely to prevent it from falling over.

CAUTION

After completing this step, lay the assembly down

safely to prevent it from falling over.

Step 4

Joint

Left vertical

support

Step 5

10 cm

Left vertical support

Assembly Guide

DTX400K/DTX430K/DTX450K Owner’s Manual

Attaching the first/second tom part

1. Take the first/second tom part (y) from the package,

and using the tuning key, securely tighten the s key

bolts.

2. Loosen the  key bolts.

3. Slide the first/second tom part (y) onto the vertical

supports and move it down until the tops of the supports

are flush with the tops of the holes. Ensure that the tom

part is oriented as shown in the above figure at this time.

4. Tighten the  key bolts to secure the first/second tom

part (y) in place.

The details of are different for the DTX400K, DTX430K, and DTX450K.

Attaching the snare

pad

1. Take the snare part (i) from the pack-

age and lightly tighten the wing bolt.

2. Place the snare part (i) on the left arm, which was

assembled in , and slide it back until the front

end of the arm is flush with the joint.

3. Securely tighten the wing bolt.

4. Loosen the  key bolt located on the back of the snare

pad (i), and rotate the pad 180°, turning it over.

5. Tighten the  key bolt to secure the snare pad (i) in

place.

Step 6

Rear of first tom pad

Rear of second

tom pad

Vertical supports

This part has two s key bolts, one each on the left and right.

This part has two

 key bolts, one each on the left and right.

Care should be taken to avoid assembling the first and sec-

ond tom pads upside-down or back-to-front.

The tom pads will be rotated into place in .

NOTE

Step 12

Step 7

For DTX400K Owners

Step 7

Wing bolt

Left arm

Joint

Step 4

180°

Assembly Guide

DTX400K/DTX430K/DTX450K Owner’s Manual

The details of are different for the DTX400K, DTX430K, and DTX450K.

Attaching the snare

pad

1. Loosen the wing bolt on the joint on

the left arm, which was attached in

2. Rotate the joint 90° counter-clockwise, making the joint

section horizontal.

3. Securely tighten the wing bolt.

4. Loosen the  key bolt on the joint.

5. Take the snare pad (i) from the package and slide it

fully into the joint.

6. Tighten the  key bolt to secure the snare pad (i) in

place.

Attaching the snare

pad

1. Loosen the wing bolt on the joint on

the left arm, which was attached in

2. Rotate the joint 90° counter-clockwise, making the joint

section horizontal.

3. Securely tighten the wing bolt.

4. Loosen the  key bolt on the joint.

5. Take the hexagonal rod (u) from the package and slide

it fully into the joint.

6. Tighten the  key bolt to secure the hexagonal rod (u)

in place.

7. Take the snare pad (i) and the S wing bolt (o) from

the package and lightly tighten the S wing bolt (o).

(Five or six turns is sufficient.)

8. Place the snare pad (i ) on the hexagonal rod (u),

which was attached in

6. above, and slide it fully back.

Then tighten the S wing bolt (o) to secure the snare

pad (i) in place.

9. Loosen the  key bolt and adjust the angle of the snare

pad. When finished, retighten the  key bolt to secure

the snare pad in place.

Step 7

For DTX430K Owners For DTX450K Owners

Step 7

Step 4

Left arm

Wing bolt

Joint

90°

Step 7

Step 4

Left arm

Wing bolt

Joint

90°

Assembly Guide

DTX400K/DTX430K/DTX450K Owner’s Manual

The details of are different for the DTX400K, DTX430K, and DTX450K.

Attaching the hi-hat

holder

1. Loosen the two  key bolts on the joint on the snare-

pad part, which was attached in .

2. Take the hi-hat holder (!1) from the package and slide it

into the joint from the front as shown in the figure. Then

adjust the angle of the hi-hat holder.

• When correctly inserted, the tip of the hi-hat holder

(!1) will protrude slightly from the rear of the joint.

• When correctly oriented, the metal rod section at the

top of the hi-hat holder (!1) will be vertical.

3. Tighten the two  key bolts to secure the hi-hat holder

(!1) in place.

Attaching the hi-hat

holder

1. Loosen the two  key bolts on the joint on the left arm,

which was attached in .

2. Take the hi-hat holder (!1) from the package and slide it

into the joint from the rear as shown in the figure. Then

adjust the angle of the hi-hat holder.

• When correctly inserted, the tip of the hi-hat holder

(!1) will protrude slightly from the front of the joint.

• When correctly oriented, the metal rod section at the

top of the hi-hat holder (!1) will be vertical.

3. Tighten the two  key bolts to secure the hi-hat holder

(!1) in place.

Attaching the cymbal holders

1. Loosen the four  key bolts at the ends of the first/sec-

ond tom part, which was attached in .

2. Take the cymbal holders (!0) from the package and

insert them into the ends of the first/second tom part.

Then adjust the angles of the cymbal holders until they

are oriented as shown in the figure.

• When correctly inserted, the tips of the cymbal hold-

ers (!0) will protrude slightly from the bottom of the

tom part.

• When correctly oriented, the cymbal holders (!0) will

be as shown in the figure.

3. Tighten the four  key bolts to secure the cymbal hold-

ers (!0) in place.

Step 8

For DTX400K and DTX430K Owners For DTX450K Owners

Step 8

Snare pad

Joint

Step 7

Step 8

Left arm

Joint

Step 4

Step 9

!0!0

The two cymbal holders are identical.

Step 6

NOTE

Assembly Guide

DTX400K/DTX430K/DTX450K Owner’s Manual

Attaching the hi-hat

 Adjusting the position of the hi-

hat stopper pin

1. Using the tuning key, loosen the  key bolt on the

stopper, which is located at the top of the hi-hat holder.

2. Adjust the position of the pin until, as shown in the fig-

ure, it is approximately 30° counter-clockwise from the

front-rear direction of the kit when viewed from above.

3. Tighten the  key bolt to secure the stopper pin.

 Assembling the hi-hat pad

1. Remove the wing nut, the washer, and the upper felt pad

from the hi-hat holder. (Do not remove the lower felt

pad.)

2. Take the hi-hat pad (!2; one of three) from the package

and place it on the hi-hat holder with the stopper pin

also passing through the hole provided.

3. Replace the felt pad removed in 1. above the hi-hat pad

(!2).

4. Replace the washer removed in 1. above the felt pad.

5. Tighten the wing nut to secure the hi-hat pad (!2) in

place. Ensure that the wing nut is firmly tightened.

Assembling the cym-

bal pads

In this step, the two remaining cymbal/hi-hat pads (!2) are

assembled. Accordingly,

1. to 4. must be performed twice.

1. Remove the wing nut and the upper felt pad from the

cymbal holder. (Do not remove the lower felt pad.)

2. Place the cymbal pad (!2) on the cymbal holder, with

the holder passing through the central hole.

3. Replace the felt pad removed in 1. above the cymbal

pad (!2).

4. Tighten the wing nut to secure the cymbal pad (!2) in

place.

Rotating the tom

pads into place

applies to each of the three tom pads. Accord-

ingly,

1. to 3. must be performed three times.

1. Loosen the  key bolt on the tom pad (e or y).

2. Rotate the tom pad to a position where it will be easy to

play. (If necessary, refer to the picture of the properly

assembled kit on page 11.)

3. Tighten the  key bolt to secure the tom pad in place.

This figure shows the hi-hat holder correctly inserted in

the DTX450K. It is inserted from the front in the DTX400K

and DTX430K, and therefore, faces in the opposite direc-

tion.

All three of the cymbal/hi-hat pads (!2) are identical. One

of these is to be used as the hi-hat pad.

Step 10

30°

 Front

Stopper

Hi-hat holder

Front

Wing nut

Felt pad

Hi-hat holder

Stopper

Washer

The two cymbal pads (!2) are identical.

Step 11

Wing nut

Felt pad

Cymbal holder

NOTE

Step 12

Assembly Guide

DTX400K/DTX430K/DTX450K Owner’s Manual

is only required for the DTX430K and DTX450K. Owners of the DTX400K should skip to .

Assembling the kick pad

1. Take the kick pad (!3) from the pack-

age, remove the four wing bolts, spring

washers, and flat washers from the

kick pad holder, and arrange each set

nearby in the disassembled condition.

2. Assemble the base to the holder as shown below, and

then from the base side, assemble the wing bolts, spring

washers, and flat washers removed in

1. in order to

secure it in place.

3. Take the foot pedal (!5) from the package and insert the

beater into the hole in the holder as shown below.

4. Slide the beater rod into the hole until the tip protrudes

approximately 15 mm from the rear, and then tighten

the beater bolt using the tuning key.

5. Turn the foot pedal’s T-bolt counter-clockwise to loosen

it.

6. Fit the raised section at the front of the kick pad holder

into the foot-pedal’s assembly bracket.

7. Turn the foot pedal’s T-bolt clockwise to secure the

parts together.

8. Operate the pedal and confirm whether the beater head

strikes the kick pad near the center. If not, adjust the

length of the beater or move it left or right as required.

Positioning the hi-hat controller and kick drum

Arrange the hi-hat controller (!4) and the kick drum parts or

kick unit (!5) as shown in the figure on the left.

Step 13

Step 14

Step 13

Wing bolt

Spring washer

Flat washer

Kick pad

Kick padBase

Beater Tuning key

Holder

Connecting

rod

Connecting rod

Beater bolt

T- b o l t

Beater head

Assembly bracket Raised section T-bolt

Step 14

DTX400K

DTX430K/DTX450K

Kick drum parts

IMPORTANT

The hi-hat controller (!4) and the kick unit (!5) from the

DTX400K are almost identical in appearance. They can be

told apart by the sticker on the base section.

Assembly Guide

DTX400K/DTX430K/DTX450K Owner’s Manual

Fine-tuning the positions of the pads and the drum module

Sit on your stool and adjust the positions of the pads and the

drum module to your liking.

• To adjust the height of the snare pad, loosen the



key bolt.

• To adjust the height of the third tom pad, loosen the



key bolt.

• To adjust the height of the drum module, loosen the

key bolt.

• To tilt the drum module forwards or backwards, loosen the



key bolt.

Connecting the pads to the drum module

1. Insert the mini plugs* at one end of the nine-channel

snake cable (!6) into the correct trigger input jacks

(SNARE to KICK/PAD) on the right side of the drum

module. (*: The smaller set of plugs.)

2. Insert the nine-channel snake cable’s standard plugs*

into the jacks in the corresponding pads. (*: The larger

set of plugs.)

3. Wrap the cables for the snare pad, the tom pads, and the

cymbal/hi-hat pads around the cable clips to prevent

them from being pulled out.

4. Using the cable bands (!8), secure the cables to the kit

rack at the positions in the figure above.

Congratulations—You have finished assembling

your electronic drum kit!

Step 15

Drum module

Snare pad

Third tom

pad

CAUTION

• Be sure to always retighten any key bolt after you have

finished adjusting the corresponding part.

• Before moving on to the next step, ensure that all key

bolts have been tightened.

• Refer back to if you wish to readjust the angle of the

snare pad.

• Refer back to if you wish to readjust the angles of the

tom pads.

NOTE

Step 7

Step 12

Step 16

RIDESNRHH

KICKHHCHHCRRIDETOM3TOM2TOM1SNR

TOM2TOM1CR TOM3 KICK HHC

RIDE

SNR

KICK

HHC

TOM3

TOM2

TOM1

KICK HHC

DTX400K

Right side of the drum module

Nine-channel snake cable

The sticker on each of the snake cable’s plugs indicates the

name of the corresponding pad.

NOTE

Excessive bending can damage the cables. Ensure, there-

fore, that they are not bent at an extreme angle when

wrapped around the clips.

NOTICE

Setup

DTX400K/DTX430K/DTX450K Owner’s Manual

Setting Up for Sound

1. Ensure that your drum module is turned off (i.e., none

of the buttons are lit).

2. Insert the power adaptor’s DC plug into the

[] connector on the left side of the

module.

3. Hook the power adaptor’s cord around the cord clip to

prevent it from being accidentally pulled out.

4. Plug the power adaptor’s AC power cord into an AC

wall socket or another electrical outlet.

Your drum module does not have built-in speakers. In order

to hear it, therefore, you will need to connect headphones or

monitor speakers via the [PHONES/OUTPUT] standard

stereo-audio jack. You can adjust the output volume using

the [VOLUME] buttons on the control panel.

You can connect a portable music player or another similar

source of audio to your drum module via the [AUX IN]

(auxiliary input) stereo mini-jack. This makes it possible to

play along with your favorite tunes.

Connecting the Power

CAUTION

Excessive bending can damage the power adaptor

cord and create a fire hazard. Ensure, therefore, that

the power cord is not bent at an extreme angle when

wrapped around the clip.

WARNING

Use only the power adaptor that came with your drum

module.

Cord clip

Power adaptor’s cord

Connecting Headphones or Speakers

The [PHONES/OUTPUT] jack is a stereo connector. You can con-

nect a 1/4” mono-audio jack to it, but in such a case, please be

sure to set the output to mono using the Stereo/Mono parameter

from Menu Mode (page 53).

CAUTION

To prevent hearing loss, avoid using headphones at a

high volume for extended periods of time.

Connecting a Music Player

• Whenever connecting other devices, ensure that the cables you

use have plugs that match the input or output connectors on

those devices.

• Before making connections, furthermore, you should also turn

the volume on the other devices fully down.

• When all connections have been made, use each device’s vol-

ume controller to balance its output with that of the drum mod-

ule.

NOTE

NOTICE

1/8” stereo-mini

to stereo-mini

cable

Portable music player,

etc.

Standard 1/4”

mono-audio jack

Powered speakers

Standard 1/4”

stereo-audio jack

Headphones

Setting Up for Sound

DTX400K/DTX430K/DTX450K Owner’s Manual

1. If you have connected your drum module to other audio

devices such as powered speakers, ensure that the vol-

ume on all other devices is turned down fully.

2. Press the [ ] (Standby/On) button.

The drum module will turn on and its buttons will light up.

1. If you have connected your drum module to other audio

equipment, ensure that the volume on all other devices

is turned down fully.

2. Press the [ ] (Standby/On) button.

The drum module will turn off and all button lights will

go out.

The Auto Power-Off function automatically turns off the

drum module after a certain period of inactivity. This helps

to save energy should you forget to turn it off yourself.

 Setting the Auto Power-Off Function

You can set the amount of time that the Auto Power-Off

function will wait before turning off the drum module. For

details, see the description of the Auto Power-Off Time

parameter from Menu Mode (page 53).

 Quickly disabling Auto Power-Off

To quickly disable the Auto Power-Off function, turn on the

drum module while holding down the [TRAINING] button.

The function will remain off until you set a new Auto

Power-Off time.

Straight out of the box, your drum module already contains

a wide range of pre-programmed drum kits and songs.

These default settings—collectively known as the Factory

Set—can be conveniently restored at any time if you have

accidentally overwritten them or wish to delete all of your

own settings. To do so, use the Factory Set function as fol-

lows.

1. Press the [ ] (Standby/On) button and verify that the

drum module turns off.

2. Turn on the drum module while holding down the

[VOLUME+] button and the [VOLUME–] button.

The drum module’s lights will flash and the Factory Set

will be restored.

Turning On the Drum Module

Connect the hi-hat controller before turning on the drum

module. Please do not turn the drum module on with the hi-

hat controller depressed. The drum module can not identify

the type of pedal properly and it causes that the kick may

produce much smaller sound than expected.

Turning Off the Drum Module

CAUTION

When setting up the product, make sure that the AC

outlet you are using is easily accessible. If some trou-

ble or malfunction occurs, immediately turn off the

power switch and disconnect the plug from the outlet.

Even when the power switch is turned off, electricity is

still flowing to the product at the minimum level. When

you are not using the product for a long time, make

sure to unplug the power cord from the wall AC outlet.

The drum module automatically stores all current settings

before it turns off. For this reason, please do not unplug the

power adaptor until all button lights have gone out.

Auto Power-Off

The drum module automatically stores all current settings before

it turns off.

NOTE

NOTICE

NOTE

• In certain modes of operation, the Auto Power-Off function will

not turn off the drum module when the set time has elapsed. We

recommend, therefore, that you always turn off the drum module

manually when you are finished using it.

• If you expect the drum module to be inactive for a certain length

of time while connected to other audio equipment, we recom-

mend that you turn the volume on the other equipment fully

down. Alternatively, you can disable the Auto Power-Off function

to ensure that the drum module stays on.

• Settings for the Auto Power-Off function do not represent exact

times and there may be some variation.

• By default, the Auto Power-Off time is set to 30 minutes.

Restoring the Default Settings

(Factory Set)

When you restore the Factory Set as described below, any

changes you have made to parameters will be lost. Before pro-

ceeding, therefore, you should ensure that they contain no irre-

placeable settings.

NOTICE

NOTE

Hold

NOTICE

Hold

Sivu latautuu...

Yamaha DTX400K Omistajan opas

Merkki: Yamaha

Malli: DTX400K

Luokka: Music drums

Tyyppi: Omistajan opas

Tämä ohje sopii myös

Lataa PDF

raportti

muilla kielillä

polski: Yamaha DTX400K Instrukcja obsługi
Türkçe: Yamaha DTX400K El kitabı
English: Yamaha DTX400K Owner's manual
čeština: Yamaha DTX400K Návod k obsluze
svenska: Yamaha DTX400K Bruksanvisning
русский: Yamaha DTX400K Инструкция по применению
italiano: Yamaha DTX400K Manuale del proprietario
Deutsch: Yamaha DTX400K Bedienungsanleitung
português: Yamaha DTX400K Manual do proprietário
dansk: Yamaha DTX400K Brugervejledning
français: Yamaha DTX400K Le manuel du propriétaire
español: Yamaha DTX400K El manual del propietario
Nederlands: Yamaha DTX400K de handleiding
română: Yamaha DTX400K Manualul proprietarului

Aiheeseen liittyviä papereita

Muut asiakirjat

Apogee Groove Pikaopas