Yamaha MCX-1000 Omistajan opas

Kategoria
CD players
Tyyppi
Omistajan opas
UCG
B
A
2
IMPORTANT SAFETY INSTRUCTIONS
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert you to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle
is intended to alert you to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
1
Read these instructions.
2
Keep these instructions.
3
Heed all warnings.
4
Follow all instructions.
5
Do not use this apparatus near water.
6
Clean only with dry cloth.
7
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10
Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11
Only use attachments/accessories specified by the manufacturer.
12
Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13
Unplug this apparatus during lightning storms or when unused for
long periods of time.
14
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
3
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by
playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion - and, most
importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late,
YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from
excessive volume levels.
FCC INFORMATION (for US customers)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements. Modifications
not expressly approved by Yamaha may void your authority,
granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/
or another product use only high quality shielded cables. Cable/s
supplied with this product MUST be used. Follow all installation
instructions. Failure to follow instructions could void your FCC
authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with the
requirements listed in FCC Regulations, Part 15 for Class “B”
digital devices. Compliance with these requirements provides a
reasonable level of assurance that your use of this product in a
residential environment will not result in harmful interference
with other electronic devices.
This equipment generates/uses radio frequencies and, if not
installed and used according to the instructions found in the users
manual, may cause interference harmful to the operation of other
electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product is
found to be the source of interference, which can be determined by
turning the unit “OFF” and “ON”, please try to eliminate the
problem by using one of the following measures:
Relocate either this product or the device that is being affected by
the interference.
Utilize power outlets that are on different branch (circuit breaker
or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead, change the
lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results,
please contact the local retailer authorized to distribute this type of
product. If you can not locate the appropriate retailer, please
contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe
Ave, Buena Park, CA 90620.
The above statements apply ONLY to those products distributed
by Yamaha Corporation of America or its subsidiaries.
4
To assure the finest performance, please read this manual carefully. Keep
it in a safe place for future reference.
Install this unit in a well ventilated, cool, dry, clean place - away from
direct sunlight, heat sources, vibration, dust, moisture, and/or cold.
Avoid ventilation space of at least 30 cm on the top, 20 cm on the left
and right, and 10 cm on the back of this unit.
Locate this unit away from other electrical appliances, motors, or
transformers to avoid humming sounds.
Do not expose this unit to sudden temperature changes from cold to hot,
and do not locate this unit in a environment with high humidity (i.e. a
room with a humidifier) to prevent condensation inside this unit, which
may cause an electrical shock, fire, damage to this unit, and/or personal
injury.
Avoid installing this unit where foreign object may fall onto this unit
and/or this unit may be exposed to liquid dripping or splashing. On the
top of this unit, do NOT place:
Other components, as they may cause damage and/or discoloration on
the surface of this unit.
Burning objects (i.e. candles), as they may cause fire, damage to this
unit, and/or personal injury.
Containers with liquid in them, as they may fall and liquid may
electrical shock to the user and/or damage to this unit.
Do not cover the rear panel of this unit with a newspaper, tablecloth,
curtain, etc. in order not to obstruct heat radiation. If the temperature
inside this unit rises, it may cause fire, damage to this unit, and/or
personal injury.
Do not plug in this unit to a wall outlet until all connections are
complete.
Do not operate this unit upside-down. It may overheat, possibly causing
damage.
Do not use force on switches, knobs and/or cords.
When disconnecting the power cord from the wall outlet, grasp the plug;
do not pull the cord.
Do not clean this unit with chemical solvents; this might damage the
finish. Use a clean, dry cloth.
Only voltage specified on this unit must be used. Using this unit with a
higher voltage than specified is dangerous and may cause fire, damage to
this unit, and/or personal injury. YAMAHA will not be held responsible
for any damage resulting from use of this unit with a voltage other than
specified.
To prevent damage by lightning, disconnect the power cord from the
wall outlet during an electrical storm.
Do not attempt to modify or fix this unit. Contact qualified YAMAHA
service personnel when any service is needed. The cabinet should never
be opened for any reasons.
When not planning to use this unit for long periods of time (i.e.
vacation), disconnect the AC power plug from the wall outlet.
Be sure to read the “TROUBLESHOOTING” section on common
operating errors before concluding that this unit is faulty.
Before moving this unit, first check that there is no disc in the disc tray.
Finally, press STANDBY/ON to turn off this unit, and disconnect the
AC power plug from the wall outlet.
SPECIAL INSTRUCTIONS FOR U.K. MODEL
For U.K. customers
If the socket outlets in the home are not suitable for the plug supplied with
this appliance, it should be cut off and an appropriate 3 pin plug fitted. For
details, refer to the instructions described above.
Note: The plug severed from the mains lead must be destroyed, as a plug
with bared flexible cord is hazardous if engaged in a live socket outlet.
CAUTION: READ THIS BEFORE OPERATING THIS UNIT
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
Laser component in this product is capable of emitting radiation
exceeding the limit for Class 1.
IMPORTANT!
Please record the serial number of this unit in the space below.
Model:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owners Manual in a safe place for future reference.
IMPORTANT
The wires in this mains lead are coloures in accordance with the
following code:
GREEN-and-YELLOW:Earth
BLUE:Neutral
BROWN:Live
As the colours of the wires in the mains lead of this apparatus may not
correspond with the coloured markings identifying the terminals in your
plug proceed as follows: The wire which is coloured GREEN-and-
YELLOW must be connected to the terminal in the plug which is
marked by the letter E or by the safety earth symbol or coloured
GREEN or GREEN-and -YELLOW. The wire which is coloured BLUE
must be connected to the terminal which is marked with the letter N or
coloured BLACK. The wire which is coloured BROWN must be
connected to the terminal which is marked with the letter L or coloured
RED.
For Canadian Customers
To prevent electric shock, match wide blade of plug to wide slot and
fully insert.
This Class B digital apparatus complies with Canadian ICES-003.
Do not remove the wireless LAN card from the MCX-1000.
5
For US customers
For Canadian customers
For U.K. and European customers
CAUTION: READ THIS BEFORE OPERATING THIS UNIT
This equipment complies with FCC radiation exposure limits set forth
for uncontrolled equipment. This equipment should be installed and
operated with a minimum distance of at least 20cm between the radiator
and the persons body (excluding extremities: hands, wrists, feet, and
legs) and must not be co-located or operated with any other antenna or
transmitter.
Operation is subject to the following two conditions: (1) This device
may not cause interference, and (2), this device must accept any
interference received, including interference that may cause undesired
operation of the device.
The installer of this radio equipment must ensure that the antenna is
located or pointed such that it does not emit RF field in excess of Health
Canada limits for the general population: consult Safety Code 6,
obtainable from Health Canada's website www.hc-sc.gc.ca/rpb
We, the manufacturer YAMAHA hereby declare that the MCX-1000 is
in compliance with the essential requirements and other relevant
provisions of Directive 1999 / 5 / EC.
Vi, tillverkaren YAMAHA, betygar härmed att MCX-1000 är i
överensstämmelse med de erforderliga krav och andra tillämpliga
bestämmelser som anges i direktivet 1999/5/EC.
Noi, il fabbricante YAMAHA, con questo dichiariamo che MCX-1000
si trova in osservanza dei requisiti essenziali e delle altre normative
pertinenti della direttiva 1999 / 5 / EC.
Nosotros, el fabricante YAMAHA, declaramos por el presente
testamento que el MCX-1000 cumple con los requisitos esenciales y
otras provisiones pertinentes de la Directiva 1999/5/EC.
YAMAHA verklaart hierbij dat de MCX-1000 voldoet aan de essentiële
vereisten en andere relevante voorzieningen van Richtlijn 1999/5/EC.
Allen voor klanten in Nederland
Bij dit product zijn batterijen geleverd.
Wanneer deze leeg zijn, moet u ze niet
weggooien maar inleveren als KCA.
“Music recognition technology and related data are provided by Gracenote and
the Gracenote CDDB
®
Music Recognition Service
SM
. Gracenote is the industry
standard in music recognition technology and related content delivery. For more
information visit www.gracenote.com
.”
“CD and music-related data from Gracenote CDDB
®
Music Recognition
Service
SM
© 2000, 2001, 2002 Gracenote. Gracenote CDDB Client Software ©
2000, 2001, 2002 Gracenote. U.S. Patents Numbers #5,987,525; #6,061,680;
#6,154,773, and other patents issued or pending.
CDDB is a registered trademark of Gracenote. The Gracenote logo and logotype,
the Gracenote CDDB logo and logotype, and the “Powered by Gracenote CDDB”
logo are trademarks of Gracenote. Music Recognition Service and MRS are
service marks of Gracenote.”
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and
Thomson.
Supply of this product does not convey a license nor imply any right to distribute
content created with this product in revenue-generating broadcast systems
(terrestrial, satellite, cable and/or other distribution channels), streaming
applications (via Internet, intranets and/or other networks), other content
distribution systems (pay-audio or audio-on-demand applications and the like) or
on physical media (compact discs, digital versatile discs, semiconductor chips,
hard drives, memory cards and the like). An independent license for such use is
required. For details, please visit http://mp3licensing.com
This product contains AVE-TCP from ACCESS CO.LTD.
Copyright © 1996-2002 ACCESS CO.,LTD
6
CONTENTS
Features of the MusicCAST server ................................8
About this manual ..........................................................8
What is the MusicCAST system? ...................................9
Supplied accessories ...................................................10
Controls and functions .................................................11
Front panel .............................................................11
Rear panel ..............................................................13
Remote control .......................................................14
Preparing the remote controls ......................................16
Preparing the MusicCAST server remote control ...16
Checking your system connections ..............................17
Component check list .............................................17
MusicCAST server standby and power modes ............18
Using this manual .........................................................19
Operating the MusicCAST server ................................20
Music storage formats ............................................21
Loading a CD into the MusicCAST server ..............21
The CD contents display screen ............................23
Storing a CD ...........................................................24
Auto-storing CDs ....................................................25
Recording audio material from an external
component on the MusicCAST server .........................26
Check component connections ..............................26
Recording ...............................................................27
Adjusting the recording level ..................................28
Setting the recording mode ....................................29
Selecting a song by its artist ........................................30
Selecting a song by its album ......................................32
Selecting a song by its genre .......................................34
Selecting a song by its name .......................................36
Using song linking ..................................................37
Selecting a song from the list of bookmarks ................38
The Play Information screen ........................................39
The Play Information screen time display ..............39
Using the Play Information screen Sub Menu ........39
Playback of songs from a preselected list (Playlist) .....41
Searching for a specific part of a song (Search) ..........43
Search forward .......................................................43
Search backward ....................................................43
Skipping to another song .............................................43
Skipping to the next song .......................................43
Returning to the start of the currently
playing song ...........................................................43
Skipping to the previous song ................................43
Groups .........................................................................44
Listening to albums ................................................44
Listening to artists ..................................................45
Listening to genres .................................................45
Listening to Playlists ...............................................45
Repeat Playback ..........................................................46
Random Playback ........................................................47
Using the MusicCAST server to listen to CDs ..............48
Using the MusicCAST server to listen to
external components ....................................................50
Listening to songs recorded from external
components .................................................................51
Listening to MP3 CDs ..................................................52
MP3 CD specifications ...........................................52
Bookmarking songs for listening ..................................53
To attach a bookmark .............................................53
To playback a bookmarked song ...........................53
Removing a bookmark ...........................................54
Deleting all bookmarks ...........................................54
Playback using the “Song Statistics” screen ................55
Displaying library item properties on screen ................56
Editing capabilities of the MusicCAST server ..............57
Editing album details ....................................................59
Opening the album editing screen (Sub Menu) ......59
Creating a new album ............................................60
Changing an album name ......................................60
Deleting an Album ..................................................61
Moving an album to another artist ..........................61
Moving an album to another genre .........................62
Editing artist details ......................................................64
Opening the artist editing screen (Sub Menu) ........64
Creating a new artist ..............................................65
Changing an artist name ........................................65
Deleting an artist ....................................................66
Editing Genre details ....................................................67
Opening the genre editing screen (Sub Menu) ......67
Creating a new genre .............................................68
Changing a genre name .........................................68
Deleting a genre .....................................................69
Editing songs ...............................................................70
Opening the song editing screen (Sub Menu) ........70
Changing a song name ..........................................71
Deleting a song ......................................................71
Editing songs recorded from external components ......72
Opening the song editing screen (Sub Menu) ........72
Changing a song name ..........................................73
Deleting a song ......................................................73
Moving a song ........................................................74
Making playlists ............................................................75
Deleting playlists and playlist items ........................77
Changing playlist and collection names .................77
Moving playlists ......................................................78
Using the on-screen keyboard to enter characters ......78
Using a PS/2 keyboard with the MusicCAST server ....79
Connecting a PS/2 keyboard to the
MusicCAST server .................................................79
Other keyboard functions .......................................79
CD recording song formats ....................................80
Selecting songs to record from the songs
stored in the MusicCAST server ..................................80
Changing the song order ........................................83
Removing a song from the recording list ................84
Getting started
Storing music on the MusicCAST server
Playback
Editing
Creating CDs
7
Recording a CD to a CD-R (Duplicating a CD) ............ 85
Setting recording parameters ......................................88
Making a high quality recording .............................88
Selecting a recording format ..................................88
Setting recording speed .........................................88
Setting the Recording auto level function ...............88
Deleting a CD-RW (Initialization) .................................89
Automatically adjusting YAMAHA AV receiver
surround program effect settings for a genre ...............91
Checking the status of a MusicCAST client .................92
MusicCAST client playback from the
MusicCAST server .......................................................93
Locking and unlocking MusicCAST clients ..................94
Stopping and starting playback on all
MusicCAST clients simultaneously ..............................95
Controlling the MusicCAST client Sleep
mode from the MusicCAST server ...............................95
Editing MusicCAST client names .................................96
MusicCAST Server Timer functions .............................97
Starting playback on the MusicCAST
server at a preset time ...........................................97
Starting recording on the MusicCAST
server at a preset time ...........................................98
Activating the MusicCAST server Timer function ...99
MusicCAST client Timer functions .............................101
Starting playback on MusicCAST clients
at a preset time ....................................................101
Activating the MusicCAST client Timer function ..102
What is a wireless network connection,
and when should I use one? ................................104
What is a wired network connection,
and when should I use one? ................................105
MusicCAST network configuration .............................106
Preparing to use Auto Configuration ....................106
Using Auto Configuration .....................................106
MusicCAST Server network “Expert Settings” ...........108
IP address screen ................................................108
DHCP service screen ...........................................110
Wireless LAN screen ............................................111
Viewing the MusicCAST Server network status ........112
IP Address screen ................................................112
Wireless LAN screen ............................................113
MusicCAST client ID manual configuration ............... 113
System Setup menus ...........................................115
Default system settings ........................................115
Opening the system setting screens ..........................117
Setting the date and time ...........................................117
Setting the video output parameters ..........................119
Setting the Gracenote CDDB connection .................. 119
Setting the auto-play function ....................................120
Set the MusicCAST server data storage format ........ 121
Setting AV receiver parameters ................................. 122
Turning the Auto Levelling function on and off .......... 124
Setting the screen display .......................................... 124
Enabling PCM format playback on MusicCAST
clients ......................................................................... 125
Setting up a PS/2 keyboard ....................................... 126
Setting the standby mode .......................................... 127
Setting the brightness of the front panel display ........ 127
Deleting data from the hard disk drive ....................... 128
Updating the MusicCAST system ..............................128
Resetting the MusicCAST server to factory
defaults ......................................................................129
Opening the system information screens .................. 130
Checking hard drive capacity .....................................131
Checking the number of songs stored in the
MusicCAST server .....................................................131
Checking MP3 encoding status .................................132
Checking the system version .....................................132
Checking AV receivers the MusicCAST server
can control .................................................................133
CD/CD-R/CD-RW compatible with this unit ............... 134
Rules of digital recording and notes on system .........136
Rules of digital recording ..................................... 136
Notes on system .................................................. 136
TROUBLESHOOTING ............................................... 137
Terms used in this manual ......................................... 140
Playback .............................................................. 140
Recording ............................................................. 140
Network connections ............................................ 140
Hardware ............................................................. 141
Software ............................................................... 142
Specifications ............................................................. 143
Index .......................................................................... 144
Using the MusicCAST with a YAMAHA AV
receiver
Controlling MusicCAST clients
Using the Timer function for playback and
recording
Configuring the MusicCAST network
System setup
Checking system information
Appendix
8
Getting started
The MusicCAST system uses a wireless network to connect the MusicCAST server and MusicCAST clients,
which call up and play songs stored in the MusicCAST server. You can use a MusicCAST client anywhere where
it can receive wireless network signals from the MusicCAST server.
Feature include
High speed storage of Audio CDs to the internal hard disk drive.
Wireless transmission to MusicCAST clients, allowing independent operation of all components in the
MusicCAST system.
Display of information on songs, albums, artists, and genres stored on the MusicCAST server hard disk drive.
Control of YAMAHA AV receivers through an RS-232C connection.
High quality recording to CD-R discs using Advanced Audio Master Quality Recording.
This manual contains the following sections:
Getting started
Explains the basic usage and concept of the MusicCAST server.
Storing music on the MusicCAST server
Explains how to store music from CDs and external components on the internal hard disk drive of the MusicCAST
server.
Playback
Explains how to play back music from the MusicCAST server using criteria such as album and artist names to
search for songs.
Editing
Explains how to manage songs stored on the MusicCAST server.
Creating CDs
Explains how to create CDs using songs you select from those stored on the MusicCAST server.
Using the MusicCAST with a YAMAHA AV receiver
The MusicCAST server can control certain functions on a YAMAHA AV receiver if you connect the two
components using a cross-type RS-232C cable. This section explains how to connect the MusicCAST server and
AV receiver and use them together.
Controlling MusicCAST clients
Explains how to control MusicCAST clients from the MusicCAST server.
Using the Timer function for playback and recording
Explains how to use the Timer function to record and playback audio material.
Configuring the network
Explains how to configure the network parameters to enable MusicCAST clients to connect to the MusicCAST
server. It also explains how to connect the MusicCAST server to the Internet.
System setup
Explains how to configure system settings (on-screen display, system time etc) of the MusicCAST server.
Checking system information
Explains how to check system information such as space remaining on the hard disk drive, and the number of
songs currently stored in the MusicCAST server.
Trouble shooting
Offers suggestions to follow when your MusicCAST server appears to be functioning incorrectly.
Features of the MusicCAST server
About this manual
This owner’s manual refers to the MCX-1000 DIGITAL AUDIO SERVER as the MusicCAST server and the
MCX-A10 DIGITAL AUDIO TERMINAL as the MusicCAST client.
Getting started
Getting started
9
The MusicCAST system consists of two components, the MusicCAST server and the MusicCAST client, which
allow you to store music and play it back in multiple locations. You can store many of the CDs in your collection and
play them back whenever you want, rather like a Juke box. The two components in the system are explained below.
The MusicCAST server acts as a storage space for music and other audio material. The MusicCAST server can store many
music CDs on its internal hard disk drive, which it can then play back, or distribute to MusicCAST clients for playback at a
distance. It records the names of the songs, artist, album, and the music genre of the CD during the storage process, allowing
easy access to the songs without requiring you to enter any data by hand. You can then use these criteria to look for and
select songs for playback simply and quickly. You can also set the MusicCAST Server to play songs at random, repeat one
particular song, or select from a number of other playback options.
NOTE
The actual number of CDs the MusicCAST server can store depends on the format you choose to store songs in. Typically it can
store approximate 100 CDs in PCM format on its 80 GB hard disk drive, or approximate 1000 CDs if you choose to store the
songs in MP3 formats only.
The MusicCAST client acts as a player for the songs stored on the MusicCAST server.
Since the MusicCAST client can connect to the MusicCAST server through a wireless connection, you can install it without
having to use any connecting cables. You can, for example, install a MusicCAST server in your living room, and
MusicCAST clients in your bedroom and childrens’ rooms, then connect and listen to the music stored in the MusicCAST
server from each location. The MusicCAST client allows you to search for songs in the same manner as the MusicCAST
server, by selecting a song, album, artist, or genre.
Additionally, because the MusicCAST server is capable of connecting to up to seven MusicCAST clients simultaneously,
you can play different songs on multiple MusicCAST clients at the same time.
NOTE
The MusicCAST server is capable of distributing music to up to 7 MusicCAST clients simultaneously. Depending on factors
such as the playback format you are using and the strength of the network signal available to MusicCAST clients connecting via
wireless connections, it may be advisable to reduce the number of MusicCAST clients in your MusicCAST system if you
encounter problems with playback.
When using many MusicCAST clients simultaneously, the MusicCAST system is sensitive to changes or weakness in network
signal strength. To ensure smooth playback select a low MP3 bitrate to store songs in (see page 121).
Changes in the strength of the network signal, or a weak network signal, can easily affect playback of songs distributed to
MusicCAST clients in PCM format over wireless network connections. If playback skips or pauses, set the MusicCAST server to
distribute songs to MusicCAST clients in MP3 format.
What is the MusicCAST system?
AV receiverSpeaker Speaker
MusicCAST server
TV/Monitor
Speaker Speaker
MusicCAST client
What is the MusicCAST server?
What is the MusicCAST Client?
Getting started
10
After unpacking, check that the following parts are included.
Remote Control Batteries (size AA, UM-3, or R6) (2)
Audio Pin Cable (1)
Optical Cable (1)
Video Pin Cable (1)
Supplied accessories
Getting started
Getting started
11
Front panel
1 STANDBY/ON
Switches the MusicCAST server between standby and power
on modes. Press and hold STANDBY/ON for two seconds to
place all MusicCAST clients in sleep mode and place the
MusicCAST server in standby mode.
2 Disc tray
3 PLAY INFO.
Displays the Play Info. screen on the on-screen display.
4 MENU
Returns the on-screen display to the Menu screens when the
MusicCAST server is displaying the Play Information screen.
5 TOP MENU
Returns the on-screen display to the Top Menu.
6 LAN STANDBY indicator
Lights when:
(1) The MusicCAST server is in LAN standby mode.
(2) The MusicCAST server places itself in LAN standby mode
after not being used for more than 30 minutes.
7 TIMER indicator
Lights when the MusicCAST server Timer function is
activated.
8 BACK
Returns one level up the menu.
9 SUB MENU
Displays the Sub Menu where applicable.
0 Controller
Moves the cursor on the on-screen display and enters, deletes,
plays, or selects the selection highlighted on the on-screen
display, as appropriate.
A CLIENT STATUS indicators
Light when MusicCAST clients connected to the MusicCAST
server are activated and able to play back songs.
Indicators 1,2,3,4 indicate the status of clients 1,2,3 and 4.
Indicator 5 lights when clients 5,6 or 7 are active.
These indicators may not go out immediately when you turn a
MusicCAST client off or place it in standby mode.
B PAGE
Scrolls the menu page down when the contents the
MusicCAST server is displaying cannot be displayed on one
menu page.
C PAGE
Scrolls the menu page up when the contents the MusicCAST
server is displaying cannot be displayed on one menu page.
D (OPEN/CLOSE)
Opens and closes the disc tray.
E (STOP)
Halts playback on the MusicCAST server.
F (PLAY)
Starts playback of the selected item.
G CD AUTO STORE
Starts the automatic CD storage process.
H ENCODING indicator
Lights when the MusicCAST server is converting PCM files to
MP3 files.
I PS/2 KEYBOARD jack
Connect a PS/2 keyboard to this input for easy data entry.
J PHONES jack
Connect your headphones to this jack.
Controls and functions
1
DEFGHI J KLMN
234567890ABC
Getting started
12
K LEVEL control
Controls the volume level of the output to your headphones.
L ANALOG REC LEVEL control
Controls the recording level when recording from a source
connected to the ANALOG IN jacks.
M Front panel door
N Front panel display
Displays information on the operations and status of the
MusicCAST server.
Getting started
Getting started
13
Rear panel
1 VIDEO jacks
The MusicCAST server outputs its on-screen display to a TV/
monitor connected to its video output jacks.
NOTE
The MusicCAST server does not record any video signal.
Video signals from the S VIDEO IN and VIDEO IN jacks
are passed directly to the S VIDEO OUT and VIDEO OUT
jacks respectively, and are not processed in the
MusicCAST server at all.
S VIDEO IN jack
Connects to the S VIDEO output from your video component
using an S VIDEO cable.
S VIDEO OUT jack
Connects to the S VIDEO input on your TV/monitor using an S
VIDEO cable.
VIDEO IN jack
Connects to the VIDEO output from the video component.
VIDEO OUT jack
Connects to the video input on your TV/monitor.
2 LAN terminal
Connects to a network or switching hub using a LAN / CAT 5
cable.
LINK indicator
Lights up when the MusicCAST server is connected to a local
area network.
ACTIVE indicator
Lights up when the MusicCAST server is transmitting or
receiving data over a local area network.
3 Wireless LAN antenna
4 RS-232C terminal
Connects to the RS-232C terminal on your YAMAHA AV
receiver using a cross-type RS-232C cable to allow the
MusicCAST server to control certain functions on the AV
receiver.
5 AUDIO jacks
OPTICAL (digital) IN jack
Connects to the optical digital output jack on an external
component to receive signals from the component over a
digital optical connection.
OPTICAL (digital) OUT jack
Connects to the optical digital input jack on an external
component to transmit signals to the component over a digital
optical connection.
COAXIAL (digital) IN jack
Connects to the coaxial digital output jack on an external
component to receive signals from the component over a
digital coaxial connection.
COAXIAL (digital) OUT jack
Connects to the coaxial digital input jack on an external
component to transmit signals to the component over a digital
coaxial connection.
ANALOG IN jacks
Connects to the analog output jacks on an external component
to receive signals from the component over an analog
connection.
ANALOG OUT jacks
Connects to the analog input jacks on an external component to
transmit signals to the component over to end of an analog
connection.
6 FAN
7 HDD slot
8 AC power cord
1
234 5 6
78
Getting started
14
Remote control
1 STANDBY/ON
Switches the MusicCAST server between standby and power
on modes. Press and hold STANDBY/ON for two seconds to
place all MusicCAST clients in sleep mode and place the
MusicCAST server in standby mode.
2 TIMER
Activates the MusicCAST server Timer function.
3 ARTISTS
Displays the Artists screen on the on-screen display.
4 ALBUMS
Displays the Albums screen on the on-screen display.
5 PLAYLISTS
Displays the Playlists screen on the on-screen display.
6 SONG STATISTICS
Displays the Song Statistics screen on the on-screen display.
7 EXT. INPUTS
Displays the External Input screen on the on-screen display.
8 RECORDING
Displays the Recording screen on the on-screen display.
9 PAUSE
Pauses/Unpauses playback on the MusicCAST server.
0 REPEAT
Cycles through the MusicCAST server repeat modes.
A
Accesses the previous track in the playback group you are
listening to.
B
Accesses the next track in the playback group you are listening
to.
C STOP
Halts playback on the MusicCAST server.
D MENU
Returns the on-screen display to the Menu screens when the
MusicCAST server is displaying the Play Information screen.
E TOP MENU
Returns the on-screen display to the top menu.
F GROUP
Accesses the previous playback group.
G BACK
Returns one level up the menu.
H (cursor left)
Moves the on-screen cursor to the left.
I SELECT
Enters, deletes, plays, or selects the selection highlighted on
the on-screen display, as appropriate.
J SUB MENU
Displays the Sub Menu where applicable.
K BROADCAST
This key is reserved for future functionality.
L FUNC1 / VOL
Reduces the volume level of a YAMAHA AV receiver
connected to the MusicCAST server with a cross-type
RS-232C cable. The “FUNC” designation indicates that this
key will gain more functionality in the future.
M FUNC2 / VOL
Increases the volume level of a YAMAHA AV receiver
connected to the MusicCAST server with a cross-type
RS-232C cable. The “FUNC” designation indicates that this
key will gain more functionality in the future.
N OPEN / CLOSE
Opens and closes the disc tray.
4
6
5
7
8
9
A
B
C
D
F
E
G
I
J
K
L
M
H
0
2
3
1
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
[
\
]
^
a
b
c
d
Getting started
Getting started
15
O ALL SONGS
Displays the All Songs screen on the on-screen display.
P GENRES
Displays the Genres screen on the on-screen display.
Q CD
Displays the CD screen on the on-screen display.
R BOOKMARKS
Displays the Bookmarks screen on the on-screen display.
S CLIENT PLAYBACK
Displays the Client Playback screen on the on-screen display.
T AV RECEIVER
Displays the AV Receiver screen on the on-screen display.
U TIME
Cycles the time display mode on the Play Information screen.
V RANDOM
Cycles the random playback mode on the Play Information
screen.
W
Searches forward through the song you are currently listening
to.
X
Searches backward through the song you are currently
listening to.
Y PLAY INFO.
Displays the “Play Info.” screen on the on-screen display.
Z PLAY
Starts playback of the selected item.
[ BOOKMARK ON/OFF
Attaches or removes a bookmark from a song.
\ GROUP
Accesses the next playback group.
] PAGE
Scrolls the menu page up when the contents the MusicCAST
server is displaying cannot be displayed on one menu page.
^ (cursor up)
Moves the on-screen cursor up.
a (cursor right)
Moves the on-screen cursor to the right.
b (cursor down)
Moves the on-screen cursor down.
c PAGE
Scrolls the menu page down when the contents the
MusicCAST server is displaying cannot be displayed on one
menu page.
d FUNC3 / MUTE
Mutes the sound outputs from a YAMAHA AV receiver
connected to the MusicCAST server with a cross-type
RS-232C cable.
Getting started
16
Preparing the MusicCAST server
remote control
Inserting the batteries
1 Remove the cover on the underside of the
remote control.
2 Insert two AA batteries into the battery
compartment, checking that the positive (+) and
negative (–) terminals on the batteries
correspond to the polarity markings on the
case.
3 Slide the cover back until it snaps into place.
Battery replacement
If you find that the remote control must be used closer
to the main unit than usual, the battery is weak.
Replace the battery with new one.
Notes on batteries
Please use AA size batteries.
Do not use old batteries together with new ones.
Do not use different types of batteries (such as alkaline
and manganese batteries) together.
Do not use rechargable batteries.
Remove the batteries from the remote control if you do
not intend to use it for an extended period.
If the battery leaks, dispose of it immediately. Avoid
touching the leaked material or letting it come in contact
with clothing, etc. Skin contact may cause burn. If it
occurs, wash with water promptly and get medical
attention.
Do not connect the positive (+) and negative (–) terminals
of any one-battery together.
Using the remote control
If using this remote control causes other equipment to
malfunction, change the location of the equipment.
Do not spill water or other liquids on the remote control.
Do not store or leave the remote control in conditions of
high temperature or humidity, such as near a stove, heater,
or bath.
Do not place the MusicCAST server in locations where the
signal receiver will be in direct sunlight or near lighting
equipment. The remote control may not function correctly
in these conditions.
Preparing the remote controls
1
2
3
30˚
30˚
Approx. 6m
Signal receiver
Getting started
Getting started
17
You must connect your MusicCAST system correctly to use all of its functions to the full. Follow the instructions in
the attached “Setup guide” carefully when setting up your system.
Component check list
TV/monitor
Allows you to carry out all operations on the MusicCAST server from the on-screen display.
MusicCAST client
Plays any of the songs stored in the MusicCAST server.
AV receiver, speakers
Connect speakers and an amplifier or AV receiver to the MusicCAST server if you wish to listen to music stored
on its hard disk drive from the MusicCAST server directly.
Internet
When song, artist, album, or genre titles are not present in its built-in Gracenote CDDB database the MusicCAST
server can use an Internet connection to download relevant information from the Gracenote CDDB online
service. We recommend that you use a broadband router to connect to the Internet. Connecting to the Internet is
not absolutely necessary, but enhances the experience of using the MusicCAST system.
PS/2 keyboard (OPTIONAL)
Allows you to easily enter and edit information such as album and song titles on the MusicCAST server.
MusicCAST client speakers
Connect speakers to the MusicCAST client if you wish to listen to music from it directly.
Checking your system connections
MusicCAST
client
AUDIO
AV receiver
Keyboard
TV/Monitor
PS/2 KEYBOARD (OPTIONAL)
SpeakerSpeaker
VIDEO
MusicCAST
client
MusicCAST server
Getting started
18
The MusicCAST server has four different standby and power modes, and uses each in a specific set of
circumstances. The MusicCAST server consumes power in all modes, however standby modes generally
consume less power than when the MusicCAST is in power on mode.
The following diagram illustrates the MusicCAST server standby and power on modes, and the actions required
to move between them. The figures in brackets indicate the amount of electricity consumed per hour in that
particular mode.
If you do not use the MusicCAST server for more than 30 minutes, it is not encoding MP3 files, and there are no
MusicCAST clients turned on and connected to the MusicCAST server, it automatically places itself in LAN
standby mode, regardless of your standby mode settings.
MusicCAST server standby and power modes
Do not disconnect the MusicCAST server from AC power when it is in Sleep mode. When disconnecting the
MusicCAST server from AC power, always press and hold STANDBY/ON for at least 2 seconds to place it in
standby mode before disconnecting it from the AC outlet.
Power on
STANDBY : Green
Front panel display : Lit
OSD : Optional
TIMER : Optional
LAN STANDBY : Optional
ENCODING : Optional
CLIENT : Optional
LAN standby
STANDBY : Red
Front panel display : Unlit
OSD : Off
TIMER : Optional
LAN STANDBY : Lit (orange)
ENCODING : Off
CLIENT : Off
Sleep
STANDBY : Red
Front panel display : Unlit
OSD : Off
TIMER : Optional
LAN STANDBY : Optional
ENCODING : Optional (*1)
CLIENT : Optional (*1)
IR Standby
STANDBY : Red
Front panel display : Unlit
OSD : Off
TIMER : Optional
LAN STANDBY : Unlit
ENCODING : Unlit
CLIENT : Unlit
STANDBY/ON key (OFF)
TIMER END
STANDBY/ON key (ON)
•TIMER START
(*1 One of these lights will always
flash when the MusicCAST server is
in Sleep Mode)
Encoding complete
MusicCAST client OFF
TIMER END
•TIMER START
STANDBY/ON key (ON)
•TIMER START
MusicCAST client
on
•TIMER START
STANDBY/ON
key (OFF)
Forced standby
After idling for 30
minutes
TIMER END
STANDBY/ON key (OFF)
Forced standby
TIMER END
STANDBY/ON key (ON)
•TIMER START
Encoding complete
MusicCAST client
OFF
TIMER END
LAN STANDBY
indicator
STANDBY
indicator
ENCODING
indicator
Front panel
display
TIMER
indicator
CLIENT
indicator
Getting started
Getting started
19
This section gives a brief sequential explanation of the procedures involved in using your MusicCAST server.
Refer to it as a guide to using this manual.
Using this manual
SECTION TITLE CONTENT
1 Getting started Use the manual, check your system connections, and learn
about the basic operations of the MusicCAST server.
2 Storing music on the
MusicCAST server
Store Audio CDs and audio material from external
components connected to the MusicCAST server. Enter
information on material that you have stored, such as artist,
album, genre, or song titles. This information is useful when
you wish to use such criteria as artist, album, or genre
name when playing back songs on the MusicCAST server
or clients, and when making original CDs from the songs
you store on the MusicCAST.
3 Playback Search for songs by criteria such as song or album name,
make lists of your favorite songs, or play back songs at
random.
4 Editing Add or change information such as song, artist, or genre
names, and make and edit lists of your favorite songs.
5 Creating CDs Make original CDs from the songs stored on the
MusicCAST server. Additionally, you can duplicate CDs
you own onto CD-R or CD-RW discs.
6 Using the MusicCAST with a
YAMAHA AV receiver
Use the MusicCAST server to adjust volume, change
inputs and effect programs, and control other functions on
a RS-232C equipped YAMAHA AV receiver connected to
the MusicCAST server with a cross-type RS-232C cable.
7 Controlling MusicCAST clients Remotely control any MusicCAST clients connected to
your MusicCAST server. This function allows you to
operate multiple MusicCAST clients simultaneously, and
check what individual MusicCAST clients are playing.
8 Using the Timer function for
playback and recording
Use the Timer to automatically start playback on the
MusicCAST server or clients, or place a component in
standby mode, at the time set in the Timer display on the
MusicCAST server. You can also set the MusicCAST
server to begin recording material at a designated time.
9 Configuring the MusicCAST
network
Configure the MusicCAST server so that MusicCAST
clients can connect to it over a wired or wireless network.
Additionally, you can configure the MusicCAST server to
work together with other components in an existing
network.
10 System setup Set parameters such as keyboard type, on-screen display
color schemes, and date and time, to suit the conditions
you use your MusicCAST server in.
11 Checking system information Check the remaining time available for song storage,
system firmware version, and other information pertaining
to your MusicCAST system.
12 Appendix Refer to this section when your MusicCAST server appears
to be functioning incorrectly.
Getting started
20
Use the remote control and the television connected to your MusicCAST server to carry out the procedures
described in this manual.
If you connect your MusicCAST server to a television, you can search for CD titles, artist names, and other data
on screen. You can also set all the other parameters used to operate the MusicCAST system from this on-screen
display.
This manual assumes that you have connected your MusicCAST server to a TV/monitor, and uses illustrations of
the on-screen display to explain operations where appropriate.
Most of the explanations in this manual center on using the remote control to operate MusicCAST components,
but you can also access most functions directly from the MusicCAST server and client units. Refer to the
illustrations provided with each explanation to check which keys or buttons are applicable, and use those controls
indicated for each numbered step to carry out procedures.
Operating the MusicCAST server
2002 YAMAHA AII rights reserved
c
1 / 1

Yamaha MCX-1000 Omistajan opas

Kategoria
CD players
Tyyppi
Omistajan opas