Ingersoll-Rand BXR-100H Operation & Maintenance Manual

BXR-100H

Operation & Maintenance Manual

REVERSIBLE PLATE COMPACTOR

Manuel de l'Opérateur et d'Entretien

PLAQUE VIBRANTE REVERSIBLE

Betriebs- und Wartungsanweisungen

REVERSIERBARER PLATTENVERDICHTER

Manuale d’uso e manutenzione

PIASTRA VIBRANTE REVERSIBILE

Manual de Utilización y Mantenimiento

PLANCHA REVERSIBLE

Bedienings- en Onderhoudshandleiding

TRILPLAAT MET DUBBELE TRILRICHTING

Betjenings- & vedligeholdelsesvejledning

REVERSERBAR PLADEKOMPAKTOR

Käyttö- ja Huolto-ohjekirja

SUUNTAA VAIHTAVILLE TÄRYLEVYILLE

Instruksjonsbok

REVERSERBAR PLATEVIBRATOR

Drift- och underhållshandbok

REVERSIBEL MARKVIBRATOR

EN

FR

DE

IT

ES

NL

DA

FI

NO

SV

BXR-100H Serial No. FF0047

Revised (10-12)

Doosan purchased Bobcat Company from Ingersoll-Rand Company in

2007. Any reference to Ingersoll-Rand Company or use of trademarks,

service marks, logos, or other proprietary identifying marks belonging

to Ingersoll-Rand Company in this manual is historical or nominative

in nature, and is not meant to suggest a current affiliation between

Ingersoll-Rand C

ompany and Doosan

Company or the products of

e

ith

er.

BXR-100H Reversible Plate Compactors

i-EN Operation & Maintenance Manual

EN

This manual should be used with all related supplemental books, engine and transmission manuals, and part books. Related

Service Bulletins should be reviewed to provide information regarding some of the recent changes. If any questions arise

concerning this publication or others, contact your local distributor for the latest available information. Contents of this

manual are based on information in effect at the time of publication and are subject to change without notice.

CONTENTS

INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ii

DECLARATION OF CONFORMITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii

SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv

SYMBOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

APPLICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

OPERATING INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

REFERENCE INFORMATION

Write the correct information for YOUR Ingersoll Rand Reversible Plate Compactor in the spaces below. Always use these numbers

when referring to your Ingersoll Rand Reversible Plate Compactor.

Reversible Plate Compactor Serial Number: _____________________________________________________________________

Engine Serial Number: ______________________________________________________________________________________

NOTES: _________________________________________________________________________________________________

_________________________________________________________________________________________________________

YOUR INGERSOLL RAND

®

DEALER: _________________________________________________________________________

ADDRESS: _______________________________________________________________________________________________

_________________________________________________________________________________________________________

PHONE: _________________________________________________________________________________________________

Ingersoll Rand Company Ltd

Construction Technologies Division

501 Sanford Avenue

Mocksville, North Carolina

United States of America

Ingersoll Rand Company Ltd

Construction Technologies Division

Swan Lane

Hindley Green

Wigan WN2 4EZ

United Kingdom

BXR-100H Reversible Plate Compactors

ii-EN Operation & Maintenance Manual

INTRODUCTION

EXCELLENT CHOICE! The Ingersoll Rand Reversible Plate Compactor you have chosen will give you many hours of maintenance

free operation resulting in a faster return of your investment.

Safe operation depends on reliable equipment and the use of proper operating procedures. Performing the checks and services

described in this manual will help keep your machine in good condition. These recommended operation procedures will help you to

avoid unsafe practices.

Safety notes have been included throughout this manual to help you avoid injury and prevent damage to the equipment. These notes

are not intended to cover all eventualities; it is impossible to anticipate and evaluate all possible methods of operation. Therefore, you

are the only person who can guarantee safe operation and maintenance.

It is important that any procedure not specifically recommended in this manual be thoroughly evaluated from the standpoint of safety

before it is implemented.

Continuing improvement and advancement of product design may cause changes to your machine which may not be included in this

publication. Each publication is reviewed and revised, as required, to update and include these changes in later editions.

Ingersoll Rand reserves the right to modify or make changes within a specific model group without notice and without incurring any

liability to retrofit units previously shipped from the factory. Contact your Ingersoll Rand Distributor for non-routine maintenance

information that is not covered in this publication.

This manual should be used with all related supplemental books, engine and transmission manuals, and part books. Related Service

Bulletins should be reviewed to provide information regarding some of the recent changes.

If any questions arise concerning this publication or others, contact your local distributor for the latest available information.

Contents of this manual are based on information in effect at the time of publication and are subjet to change without notice.

INGERSOLL RAND COMAPNY IS ISO 9001 CERTIFIED

ISO 9001 is a set of international standards that control the processes and procedures which we use to design, develop, manufacture,

distribute, and service Ingersoll Rand products.

Lloyd's Register Quality Assurance (LRQA) is the Certified Registrar Ingersoll Rand chosen to assess the Company’s compliance with

the ISO 9001 set of standards. The LRQA registration certifies that the European manufacturing plants and offices of Ingersoll Rand

(Hindley Green, United Kingdom; Les Clayes, France; Coslada, Spain; Zoeterwoude, Netherlands; Mulheim, Germany) are in

compliance with ISO 9001. Only certified assessors, like LRQA, can grant registrations.

ISO 9001 means that as a company we say what we do and do what we say. In other words, we have established procedures and

policies, and we provide evidence that the procedures and policies are followed.

BXR-100H Reversible Plate Compactors

iii-EN Operation & Maintenance Manual

EN

DECLARATION OF CONFORMITY

Machine models represented in this manual may be used in various locations world-wide. Machines sold and shipped into

European common market countries requires that the machine display the EC Mark and conform to various directives. In such

cases, the design specification of this machine has been certified as complying with EC directives. Any modification to any part is

absolutely prohibited and would result in the CE certification and marking being rendered invalid. A declaration of that conformity

follows:

DECLARATION OF CONFORMITY WITH EC DIRECTIVES

98/37/EC, 2000/14/EC amended by 2005/88/EC, 2002/44/EC

We,

Ingersoll Rand Company Ltd

Portable Power Division

Swan Lane

Hindley Green

Wigan WN2 4EZ

United Kingdom

Declare that under our sole responsibility for manufacture and supply, the product(s)

Reversible Plate Compactors Type BXR-100H

To which this declaration relates, is (are) in conformity with the provisions of the above directives using the following

principal standards EN12100, EN500-1 and EN500-4.

Issued at Hindley Green in January 2006

Peter Edgeller,

Technical Manager

CONFORMITY TO NOISE DIRECTIVE

2000/14/EC

Ingersoll Rand Company Limited declare that the following Reversible Plate Compactors have beenmanufactured in

conformity with the directive as shown.

Directive Machine Model Weigth Range

Mean Measured

Value

Guaranteed Level Notified Body

2000/14/EC

Annex VI Part 1

amended by

2005/88/EC

BXR-100H 150 kg

104.08 L

WA

105 L

WA

SNCH,

Luxembourg

N°0499

Issued at ............................ Hindley Green

1

st

Declaration: January 2006

Peter Edgeller,

Technical Manager

BXR-100H Reversible Plate Compactors

iv-EN Operation & Maintenance Manual

SAFETY INSTRUCTIONS

Overview

Before you operate, maintain, or in any other way, use this

machine, read and study this manual. Know how to safety use

the compactor’s controls and what you must do for safe

maintenance.

The machine has been built in accordance with state-of-the-art

standards and the recognized safety rules. Nevertheless, its

use may constitute a risk to life and limb of the user or of third

parties, or cause damage to the machine and to other material

property.

ALWAYS wear or use the proper safety items required for your

personal protection.

For reasons of security, long hair must be tied back or otherwise

secured, garments must be close-fitting and no jewellery – such

as rings – may be worn. Injury may result from being caught up

in the machinery or from rings catching on moving parts.

If you have ANY QUESTIONS about the safe use or

maintenance of this unit, ASK YOUR SUPERVISOR OR

CONTACT ANY Ingersoll Rand DISTRIBUTOR. NEVER

GUESS – ALWAYS CHECK.

Never make any modifications, additions or conversions which

might affect safety without the supplier’s approval. This also

applies to the installation and adjustment of safety devices and

valves as well as to welding work on load-bearing elements.

Observe all fire-warning and fire-fighting procedures.

Pre-start inspection

INSPECT your machine. Have any malfunctioning, broken or

missing parts corrected or replaced before use.

Check the machine at least once per working shift for obvious

damage and defects. Report any changes (incl. changes in the

machine’s working behaviour) to the competent organisation/

person immediately. If necessary, stop the machine immediately

and lock it.

Take the necessary precautions to ensure that the machine is

used only when in a safe and reliable state.

Operate the machine only if all protective and safety oriented

devices, such as removable safety devices, emergency shut-off

equipment, sound-proofing elements and exhausts, are in place

and fully functional.

The electrical equipment of machines is to be inspected and

checked at regular intervals. Defects such as loose connections

or scorched cables must be rectified immediately.

VERIFY that all the instruction and safety labels are in place

and readable. These are as important as any other equipment

on the compactor.

NEVER fill the fuel tank, with the engine running, while near an

open flame, or when smoking. ALWAYS wipe up any spilled fuel

immediately.

CHECK for WARNING tags placed on the machine. DO NOT

operate the equipment until repairs have been made and the

WARNING tags are removed by authorized personnel.

KNOW the location of the Emergency Shut-Down Control if the

machine is so equipped.

Operating

In the event of safety-relevant modifications or changes in the

behaviour of the machine during operation, stop the machine

immediately and report the malfunction to the competent

authority/person.

Always wear the prescribed ear protectors.

Always make sure that no person or obstruction is in your line of

travel. Watch your step to avoid tripping.

USE extreme caution and be observant when working in close

quarters or congested areas.

Before beginning work, familiarize yourself with the

surroundings and circumstances of the site, such as obstacles

in the working and travelling area, the soil bearing capacity and

any barriers separating the construction site from public roads.

When travelling on public roads, ways and places always

observe the valid traffic regulations and, if necessary, make

sure beforehand that the machine is in a condition compatible

with these regulations

Always keep at a distance from the edges of building pits and

slopes.

DO NOT run the engine in a closed building for an extended

length of time. EXHAUST FUMES CAN KILL.

DO NOT operate the compactor on non-compactable material,

such as concrete or hardened asphalt.

BXR-100H Reversible Plate Compactors

v-EN Operation & Maintenance Manual

EN

Maintenance

Observe the adjusting, maintenance and inspection activities

and intervals set out in the operating instructions, including

information on the replacement of parts and equipment. These

activities may be executed by skilled personnel only.

Ensure that the maintenance area is adequately secured.

After cleaning, examine all fuel, lubricant, and hydraulic fluid

lines for leaks, loose connections, chafe marks and damage.

Any defects found must be rectified without delay.

Always tighten any screwed connections that have been

loosened during maintenance and repair.

Any safety devices removed for set-up, maintenance or repair

purposes must be refitted and checked immediately upon

completion of the maintenance and repair work.

Ensure that all consumables and replaced parts are disposed of

safely and with minimum environmental impact.

AVOID, whenever possible, servicing, cleaning or examining the

unit with the engine running.

NEVER fill the fuel tank, with the engine running, while near an

open flame, or when smoking. ALWAYS wipe up any spilled fuel

immediately.

ALWAYS disconnect the spark plug before performing any work

on the unit.

DO NOT alter the engine governor settings from that indicated

in the engine manual.

ALWAYS replace damaged or lost decals. Refer to the Parts

Manual for the proper location and part number of all decals.

Carry out welding, flame-cutting and grinding work on the

machine only if this has been expressly authorized, as there

may be a risk of explosion and fire.

Before carrying out welding, flame-cutting and grinding

operations, clean the machine and its surroundings from dust

and other inflammable substances and make sure that the

premises are adequately ventilated (risk of explosion).

BXR-100H Reversible Plate Compactors

vi-EN Operation & Maintenance Manual

INTERNATIONAL MACHINE SYMBOLS

SYMBOLS

The following explains the meaning of international symbols that may appear on your machine.

ENGINE OIL PRESSURE

WATER TEMPERATURE

ON/OFF

LIGHTS

WATER

BATTERY

AMMETER OR VOLTMETER

AIR PRESSURE

LOW AIR PRESSURE

ENGINE RPM

BRAKE ON

BRAKE OFF

HORN

CAUTION

DIESEL FUEL

ON

OFF

SLOW

FAST

TRANSMISSION

GREASE

OIL LUBRICATION POINT

HYDRAULIC OIL

HOURS

NEUTRAL

LOW ENGINE RPM

PARKING BRAKE

DRUM VIBRATION

HIGH AMPLITUDE

LOW AMPLITUDE

FREQUENCY

CAUTION – PRESSURE

BXR-100H Reversible Plate Compactors

1-EN Operation & Maintenance Manual

EN

APPLICATION

BXR-100H is a highly versatile machine with a high compacting

energy: it will work on sand, gravel, larger crushed material,

cohesive soil, asphalt and paving stones.

The important impact force makes it possible to compact

significantly more important lift thickness in comparison to

normal plates.

Thanks to its compact design and its maneuverability,

BXR-100H is ideal for use in trenches and other restricted

spaces. The reversing feature allows the operator to enter and

exit from a confined work space along the same path.

Job proven design: the strong frame protects the operating

parts and includes the lifting eye. The high position control

handle is very ergonomic and foldable for convenient

transportation.

BXR-100H Reversible Plate Compactors

2-EN Operation & Maintenance Manual

BXR-100H Reversible Plate Compactors

3-EN Operation & Maintenance Manual

EN

SPECIFICATIONS

Performance

BXR-100H

OPERATING WEIGHT 150 kg

VIBRATION FREQUENCY 70 vpm

CENTRIFUGAL FORCE 24.5 kN

TRAVEL SPEED 20 m/min

RECOMMENDED DEPTH 410 mm

AREA CAPACITY PER HOUR 390 sq. m

NOISE LEVEL 105 Lwa

VIBRATION LEVEL 5.0 m/s²

Engine

BXR-100H

ENGINE (MAKE & MODEL) Honda GX160 Aircooled gasoline

ENGINE HORSEPOWER 3.7 kw/3600 rpm

FUEL Automobile gasoline

STARTING SYSTEM Recoil starter

DRIVE V-belt drive

Dimensions

BXR-100H

OVERALL LENGTH 1350 mm

OVERALL WIDTH 390 mm

OVERALL HEIGHT 945 mm

PLATE SIZE (W x L) 390 x 630 mm

Capacity

BXR-100H

FUEL TANK CAPACITY 3.6 liters

WATER TANK CAPACITY 14 liters

Fluid capacities

BXR-100H

ENGINE OIL (SAE 10W30) 0.6 liters

MAIN BODY OIL (SAE 10W30) 0.4 liters

BXR-100H Reversible Plate Compactors

4-EN Operation & Maintenance Manual

BXR-100H Reversible Plate Compactors

5-EN Operation & Maintenance Manual

EN

OPERATING INSTRUCTIONS

SAFETY CHECKS – PRE-STARTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

INSPECTION PRIOR TO OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OPERATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

LONG TERM STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

TRANSPORTATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

BXR-100H Reversible Plate Compactors

6-EN Operation & Maintenance Manual

SAFETY CHECKS – PRE-STARTING

Before starting each day, in addition to the 10 hour daily routine

maintenance, check or inspect the following items to ensure

trouble free performance.

1. Check fluid lines, hoses, fittings, filler openings, drain plugs,

pressure cap, muffler, safety shrouds and the area

underneath the unit for signs of leakage or damage. Fix any

leaks and correct any damage before operating.

2. Inspect the entire unit for damaged or missing parts and

repair or replace them as needed.

3. Check the fuel level. If necessary, fill the fuel tank with the

proper fuel.

4. Check all fastening hardware to ensure it is adequately

tightened and that none is missing or broken.

5. Do not operate faulty equipment.

6. Be observant of people and obstructions within the work

area.

Please read “INSTRUCTIONS FOR USE” for HONDA engine

GX160 and this instruction manual for correct use and care.

Please check if the unit is correctly maintained in good

operating conditions.

INSPECTION PRIOR TO OPERATION

Check Engine Oil

Before checking or refilling engine oil, be sure the compactor is

located on a stable level surface.

Do not thread the gauge into oil filler to check oil level. If the oil

level is below the lower level line on the dipstick, refill with the

proper oil to the upper level (to the neck of oil filler). See

SECTION – MAINTENANCE, “100 HOUR OR MONTHLY

MAINTENANCE”.

Check Engine for Fuel

WARNING

Do not refuel while smoking near an open flame or other

potential hazards.

Cleaning Air Cleaner

Check Air Cleaner to be sure it is clean and not contaminated.

If cleaning is required perform the following steps:

• Remove the outer urethane foam and inner element.

• Wash the element in kerosene or diesel fuel.

• Saturate it in a mixture of 3 parts kerosene or diesel fuel and

1 part engine oil.

• Shake off excessive oil and reinstall.

• Wash the air cleaner case using kerosene.

• After cleaning it up, apply engine oil on the inner part of the

case.

CAUTION

If the air cleaner element is seriously contaminated engine

start up may fail or poor output and malfunctions of the

engine may result.

Check each part for lose or broken Bolts and Nuts

Tighten loose bolts and nuts, if any. Check each part for fuel or

oil leak. Replace broken or damaged parts, if any, with new

ones.

OPERATION

Release the operating handle by pulling upward on the handle

pin (

c, [Figure 1]) and move the operating handle down to the

operating position.

Figure 1

BXR-100H Reversible Plate Compactors

7-EN Operation & Maintenance Manual

EN

Starting

1. Turn the ENGINE SWITCH [Figure 2] to the “ON” position.

Figure 2

2. Move the fuel valve lever [Figure 3] to the “ON” position.

Figure 3

3. Close the CHOKE LEVER [Figure 4].

If the engine is cold or the ambient temperature is low, close

the Choke Lever fully. If the engine is warm or the ambient

temperature is high, open the Choke Lever half-way, or keep

it fully open.

Figure 4

4. Position the THROTTLE LEVER (

c, [Figure 5]) to “LOW”

speed position.

Figure 5

5. Pull the STARTER HANDLE (

c, [Figure 6]) of RECOIL

STARTER slowly until resistance is felt. This is the

“COMPRESSION” point. Return the Handle to its original

position and pull swiftly. After starting the engine, allow the

Starter Handle to return to its original position while still

holding the Handle.

Figure 6

After the engine starts, allow it to run at the low speed and

warm it up without load for about five minutes. Fully open

CHOKE LEVER [Figure 4] gradually.

CAUTION

Avoid fully pulling out the rope. Return the Handle to its

original position.

ENGINE SWITCH

FUEL VALVE

LEVER

ON

CHOKE LEVER

CLOSE

OPEN

STARTER GRIP

BXR-100H Reversible Plate Compactors

8-EN Operation & Maintenance Manual

Compactor Operation

1. Shift the THROTTLE LEVER (

c, [Figure 5]) to “HIGH”

speed position. This allows the unit to start vibration. Always

operate the unit in the “HIGH” position to avoid damage to

the clutch.

WARNING

When the machine is moving in the reverse direction, the

operator must be to the right or left side of the compactor.

Do not operate from behind the operating handle.

2. Move the direction control lever (c, [Figure 7]) to the

“Forward” or “Reverse” position for the desired direction of

travel and safe speed of travel as determined by conditions.

Figure 7

3. Softly hold the guide bar with two hands without pushing the

plate; let the machine go forward or reverse at its own pace.

4. Changing direction left or right is done by rotating the plate

on itself, using the guide bar as a lever. The unit will rotate

more easily when it is vibrating.

5. Circulate the unit all around the area to be compacted in a

systematic way. Depending on the conditions, three to five

passes might be necessary to obtain the proper

compaction.

CAUTION

Never let the unit go alone as it may result into severe

injuries.

Stopping

CAUTION

Do not stop engine suddenly while running at high speed.

1. Shift the THROTTLE LEVER (c, [Figure 5]) to “LOW”

speed position.

2. Allow the engine to run at low speed for 2-3 minutes before

stopping.

3. Move the throttle lever to the “STOP” position.

4. Turn the ENGINE SWITCH [Figure 2] to the OFF position.

5. Move FUEL VALVE [Figure 3] to the “S” position.

LONG TERM STORAGE

CAUTION

Discharge fuel (No Smoking !)

1. Drain fuel from the fuel tank.

2. Close the fuel cock.

3. Move the operating handle to the verical position and secure

with handle pin (

c, [Figure 1]).

4. Clean the unit to remove all dirt, grease, or other materials.

5. Store the unit in a clean dry location. Place a cover over the

unit after it has cooled sufficiently.

CAUTION

Always stop the engine and allow to cool down before

covering the unit.

BXR-100H Reversible Plate Compactors

9-EN Operation & Maintenance Manual

EN

TRANSPORTATION

Fold up the handle in order to save space during transportation

and storage.

The lifting hook [Figure 8] has been provided in the machine’s

center of gravity for ease of lifting the compactor onto a

transporter.

Do not lift any other point except the lifting hook to avoid the

machine damage.

Figure 8

BXR-100H Reversible Plate Compactors

10-EN Operation & Maintenance Manual

BXR-100H Reversible Plate Compactors

11-EN Operation & Maintenance Manual

EN

MAINTENANCE

GENERAL MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

INITIAL BREAK-IN MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

10 HOUR OR DAILY ROUTINE MAINTENANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

100 HOUR OR MONTHLY MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

300 HOUR OR ANNUAL ROUTINE MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

TROUBLESHOOTING THE ENGINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

TROUBLESHOOTING THE MACHINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

BXR-100H Reversible Plate Compactors

12-EN Operation & Maintenance Manual

GENERAL MAINTENANCE

1. Engine RPM is adjusted to:

3,600 – 3,700 min

-1

or rpm (with load).

2. Check Bolts and Nuts for looseness. Tighten it if necessary.

3. Check for fuel and oil leak.

4. Keep the RUBBER BUFFER away from oil and fuel.

5. Check the V-Belt and Timing Belt for wear, damage and

cracks. If necessary, replace the belt with new one.

6. Please refer to “INSTRUCTION FOR USE” for HONDA

engine GX 160 regarding the how-to maintenance for

engine.

Air Cleaner

Keep the Air Cleaner Element clean. Take out the outer

urethane foam and inner element. Wash the element in

kerosene or diesel fuel. Saturate it in a mixture of 3 parts

kerosene or diesel fuel and 1 part engine oil. Shake off

excessive oil and reinstall. Wash the air cleaner case using

kerosene. After cleaning it up, apply the engine oil on the inner

part of the case.

CAUTION

If the air cleaner element is seriously contaminated, the

start-up failure, poor output and malfunctions of the engine

may result.

INITIAL BREAK-IN MAINTENANCE

Any new equipment requires an initial modification of the

maintenance schedule to properly break-in the various

component parts. Perform this one time initial break-in

maintenance after 20 to 300 hours of operation in addition to

the normal maintenance schedule. After this initial phase, the

regular intervals should be followed.

Engine Oil

Drain the engine oil after the first 20 hours of operation. Fill with

the correct amount of the recommended oil. Check the oil level

with the oil filler cap/dip stick. See “100 HOUR OR MONTHLY

MAINTENANCE”.

Figure 9

WARNING

Hot oil and/or components can burn.

Oil must be at normal operating temperature when

draining. Avoid contact with hot oil or components.

FILLER CAP/

DIP STICK

UPPER LIMIT

LOWER LIMIT

Sivu latautuu ...

Ingersoll-Rand BXR-100H Operation & Maintenance Manual

Ingersoll-Rand BXR-100H Operation & Maintenance Manual

muilla kielillä

Liittyvät paperit

Muut asiakirjat