Yamaha CD-N301 Omistajan opas

G

Network CD Player

Lecteur CD Réseau

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

GEBRNUIKSAANWIJZIG

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

CD-N301_OM_G_cv1_4.fm Page 1 Monday, June 23, 2014 7:49 PM

i En

1 To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2 Install this sound system in a well ventilated, cool, dry,

clean place - away from direct sunlight, heat sources,

vibration, dust, moisture, and/or cold. For proper

ventilation, allow the following minimum clearances.

Top: 10 cm (4 in)

Rear: 10 cm (4 in)

Sides: 10 cm (4 in)

3 Locate this unit away from other electrical appliances,

motors, or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes

from cold to hot, and do not locate this unit in an

environment with high humidity (i.e. a room with a

humidifier) to prevent condensation inside this unit,

which may cause an electrical shock, fire, damage to this

unit, and/or personal injury.

5 Avoid installing this unit where foreign object may fall

onto this unit and/or this unit may be exposed to liquid

dripping or splashing. On the top of this unit, do not

place:

– Other components, as they may cause damage and/or

discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause fire,

damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall and

liquid may cause electrical shock to the user and/or

damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If the

temperature inside this unit rises, it may cause fire,

damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may overheat,

possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall outlet,

grasp the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used. Using

this unit with a higher voltage than specified is dangerous

and may cause fire, damage to this unit, and/or personal

injury. Yamaha will not be held responsible for any

damage resulting from use of this unit with a voltage

other than specified.

13 To prevent damage by lightning, keep the power cable

and outdoor antennas disconnected from a wall outlet or

this unit during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact

qualified Yamaha service personnel when any service is

needed. The cabinet should never be opened for any

reasons.

15 When not planning to use this unit for long periods of

time (i.e. vacation), disconnect the AC power plug from

the wall outlet.

16 Be sure to read the “TROUBLESHOOTING” section on

common operating errors before concluding that this unit

is faulty.

17 Before moving this unit, press to set this unit to the

standby mode, and disconnect the AC power plug from

the wall outlet.

18 Condensation will form when the surrounding

temperature changes suddenly. Disconnect the power

cable from the outlet, then leave this unit alone.

19 When using this unit for a long time, this unit may

become warm. Turn the power off, then leave this unit

alone for cooling.

20 Install this unit near the AC outlet and where the AC

power plug can be reached easily.

21 The batteries shall not be exposed to excessive heat such

as sunshine, fire or the like.

– Keep the batteries in a location out of reach of

children. Batteries can be dangerous if a child were to

put in his or her mouth.

– If the batteries grow old, the effective operation range

of the remote control decreases considerably. If this

happens, replace the batteries with two new ones as

soon as possible.

– Do not use old batteries together with new ones.

– Do not use different types of batteries (such as

alkaline and manganese batteries) together. Read the

packaging carefully as these different types of

b

atterie

s may have the same shape and color.

– Exhausted batteries may leak. If the batteries have

leaked, dispose of them immediately. Avoid touching

the leaked material or letting it come into contact with

clothing, etc. Clean the battery compartment

thoroughly before installing new batteries.

– If you plan not to use the unit for a long period of

time, remove the batteries from the unit. Otherwise,

the batteries will wear out, possibly resulting in a

leakage of battery liquid that may damage the unit.

– Do not throw away batteries with general house

waste. Dispose of them correctly in accordance with

your local regulations.

22 Excessive sound pressure from earphones and

headphones can cause hearing loss.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

This unit is not disconnected from the AC power source as long as

it is connected to the wall outlet, even if this unit itself is turned off

by . This state is called the standby mode. In this state, this unit is

designed to consume a very small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

1 En

English

PREPARATION OPERATIONS OTHERS

WHAT YOU CAN DO WITH THIS UNIT ................. 2

Sources that can be played back on this unit ..................... 2

Devices that can control this unit....................................... 3

Operations from your mobile device ................................. 3

SUPPLIED ACCESSORIES ......................................... 4

REMOTE CONTROL PREPARATION..................... 4

CONTROLS AND FUNCTIONS ................................. 5

Front panel ......................................................................... 5

Remote control................................................................... 6

Rear panel .......................................................................... 8

Front panel display............................................................. 8

CONNECTIONS ............................................................ 9

Connecting to an amplifier................................................. 9

Connecting to a network

(PC/NAS/Internet connection)..................................... 10

Turning on this unit.......................................................... 11

SETUP OF YOUR NETWORK DEVICES............... 12

Sharing music files stored on your PC............................. 13

PLAYBACK OF CDS .................................................. 14

Playing back a CD ........................................................... 14

Using A-B repeat playback.............................................. 16

Using program playback mode ........................................ 16

PLAYBACK OF SPOTIFY SERVICE ...................... 17

PLAYBACK OF MUSIC FILES ON YOUR

PC/NAS...................................................................... 18

Operations from the main unit or remote control ............ 18

PLAYBACK OF INTERNET RADIO....................... 20

PLAYBACK OF AirPlay............................................. 22

Playing iPod ..................................................................... 22

Playing iTunes ................................................................. 22

Clearing AirPlay .............................................................. 22

SETUP MENU .............................................................. 23

Setup menu operations..................................................... 23

Setup menu items............................................................. 24

Advanced setup menu ...................................................... 24

Updating the firmware ..................................................... 25

FREQUENTLY ASKED QUESTIONS......................26

TROUBLESHOOTING ...............................................27

Front panel display messages........................................... 31

ADDITIONAL INFORMATION................................32

PLAYABLE DISCS AND FILE FORMATS .............33

Playable media and devices ............................................. 33

Playable discs and file formats ........................................ 34

SPECIFICATIONS.......................................................35

(at the end of this manual)

Information about third party software

licenses ..........................................................i

CONTENTS

PREPARATION

OPERATIONS

OTHERS

About this manual

• Notes contain important information about safety and operating instructions. y indicates a tip for your operation.

• “iPod” described in this manual may also refer to “iPhone” or “iPad”.

2 En

PREPARATION

This unit is a network CD player, on which you can enjoy playing back music files stored on your media server (PC or

NAS), audio contents on the Internet radio, CD, Spotify, AirPlay devices (iPod/iTunes), by connecting the unit to your

home network (DLNA) and audio system on the same network.

y

For details on DLNA or NAS, see “ADDITIONAL INFORMATION” (☞ P.32).

* You need a commercially available Wi-Fi broadband router when you use an iPod/Android.

1 Play back the Internet radio (☞ P.20)

2 Play back music files stored on your PC

(☞ P.12, 18)

3 Play back music files stored on your NAS

(☞ P.12, 18)

4 Play back your iPod with AirPlay (☞ P.22)

5 Play back the Spotify service (☞ P.17)

6 Play back a CD (☞ P.14)

y

For details on connecting the devices, see “CONNECTIONS” (☞ P.9).

WHAT YOU CAN DO WITH THIS UNIT

Sources that can be played back on this unit

SELECT

PUSH

PURE DIRECTSOURCE

ENTER

RETURN

Amplifier

This unit (CD-N301)

1 Internet

Modem

Broadband router*

2 PC

3 NAS

4 iPod (AirPlay)*

5 iPod/Android (Spotify)*

6 CD

WHAT YOU CAN DO WITH THIS UNIT

3 En

English

PREPARATION

* You need a commercially available Wi-Fi broadband router when you use a mobile device.

A Control this unit using your mobile devices (☞ P.3, 12)

B Control this unit using the remote control (☞ P.6, 14, 18, 20, 23)

Once you install the app “NETWORK PLAYER CONTROLLER” in your mobile device, you can operate the unit with

the mobile device.

Features

• Power-on/off or other basic operation

• Changing the music source

• Selecting, playing back, and stopping songs

• Playing back songs stored in devices

For downloading the app or the latest information, access to the App Store or Google Play and search “NETWORK

PLAYER CONTROLLER.”

Devices that can control this unit

Operations from your mobile device

AB

SELECT

PUSH

PURE DIRECTSOURCE

ENTER

RETURN

Broadband router*

Mobile device*

(iPod, Android)

Remote control

4 En

PREPARATION

Check that you have received all of the following items.

❚ Installing the batteries

• Change all batteries if the operation range of the remote control

narrows.

• Before inserting new batteries, wipe the compartment clean.

❚ Operation range

Aim the remote control directly at the remote control

sensor on the main unit during operation.

SUPPLIED ACCESSORIES

REMOTE CONTROL PREPARATION

AMP

DISPLAY

SETUP

POP-UP MENU

REPEAT

4

123

56

7

0

89

A/B

SHUFFLE

PROGRAM

SOURCE

OPEN/CLOSE DIMMER

PURE DIRECT

CLEAR

HOME

NOW PLAYING

OPTION

RETURN

ENTER

INPUT VOLUME

MUTE

Remote control RCA stereo cable Power cable

Batteries (AA, R6, UM-3) (× 2) Owner’s manual

Notes

2

13

SELECT

PUSH

ENTER

RETURN

30 30

AMP

DISPLAY

SETUP

POP-UP MENU

REPEAT

4

123

56

7

0

89

A/B

SHUFFLE

PROGRAM

SOURCE

OPEN/CLOSE DIMMER

PURE DIRECT

CLEAR

HOME

NOW PLAYING

OPTION

RETURN

ENTER

INPUT VOLUME

MUTE

Remote control sensor

Within 6 m (20 ft)

5 En

English

PREPARATION

1 Power indicator

• Lights up:

The unit is on.

• Lights up dimly:

The unit is in standby mode.

• Off:

The unit is off.

y

When the unit is in standby mode, you can control the power

from a network device (network standby). To enable network

standby function, set “System Config”

→

“Network Standby”

to “On” from the setup menu (☞ P.23).

2 Power switch (☞ P.11)

Switches this unit between on and off.

: On : Off

3 SOURCE (☞ P.14, 18, 20)

Selects an audio source. Each press cycles the audio sources

as follows.

CD

→

Spotify

→

Server

→

Net Radio

→

AirPlay

→

Back to CD

4 PURE DIRECT

Turns on or off PURE DIRECT mode. Audio quality will be

improved when PURE DIRECT mode is on.

The digital output is turned off when this unit is in PURE

DIRECT mode.

y

The PURE DIRECT indicator lights up when PURE

DIRECT mode is on.

5 Disc tray

Loads a disc.

6 (Open/Close)

Opens or closes the disc tray.

7 Front panel display

Shows menu items, playback information, etc.

y

For details on display messages, see “Front panel display

messages” (☞ P.31).

8 Remote control sensor (☞ P.4)

Receives infrared signals from the remote control.

9 / (Play/Pause)

Starts or pauses playback.

0 (Stop)

Stops playback.

A / (Skip/Search backward)

Skips backward. Searches tracks backward while the button

is pressed and held during playback.

/ (Skip/Search forward)

Skips forward. Searches tracks forward while the button is

pressed and held during playback.

B SELECT/ENTER (jog dial) (☞ P.14, 18, 20, 24)

Rotate to select an item and press to confirm the selection.

C RETURN (☞ P.18, 20)

Shows the upper-level menu in the front panel display.

CONTROLS AND FUNCTIONS

Front panel

SELECT

PUSH

PURE DIRECTSOURCE

ENTER

RETURN

1

65

234 9

7

0

8

ABC

Note

CONTROLS AND FUNCTIONS

6 En

1 Remote control signal transmitter

Transmits infrared signals to the main unit.

2 OPEN/CLOSE

Opens or closes the disc tray.

3 DIMMER

You can adjust the brightness of the front panel display in the

following three stages: bright, mid dim, or dim. Each press of

the button changes the brightness.

4 SOURCE (☞ P.14, 18, 20)

Selects an audio source. Each press cycles the audio sources

as follows.

CD

→

Spotify

→

Server

→

Net Radio

→

AirPlay

→

Back to CD

5 Numeric buttons (☞ P.15)

Use to enter numbers, such as the track number of a CD.

6 REPEAT (☞ P.15, 19)

Switches repeat modes.

7 A/B (☞ P.16)

Repeats playback of a specified section of a track during

audio CD playback (A-B repeat playback).

8 POP-UP MENU

This button is not available for this unit.

9 HOME (☞ P.18, 21)

Moves up top level when selecting (browsing) music files,

folders, etc.

0 /// (Cursor buttons)/ENTER

Use the cursor buttons to select an item and press ENTER to

confirm the selection.

Change the playback folder or the music file when playing

music files on your data CDs, PC or NAS.

A SETUP (☞ P.23)

Shows the setup menu in the front panel display.

B DISPLAY (☞ P.15, 19, 21)

Switches information shown in the front panel display, such

as playback information.

C Playback buttons (☞ P.15, 19, 21, 22)

(Play/Pause)

Starts or pauses playback.

(Stop)

Stops playback.

(Skip backward/Search backward)

Skips backward. Searches tracks backward while the button

is pressed and held during playback.

(Skip forward/Search forward)

Skips forward. Searches tracks forward while the button is

pressed and held during playback.

Remote control

AMP

DISPLAY

SETUP

POP-UP MENU

REPEAT

4

123

56

7

0

8 9

A/B

SHUFFLE

PROGRAM

SOURCE

OPEN/CLOSE DIMMER

PURE DIRECT

CLEAR

HOME

NOW PLAYING

OPTION

RETURN

ENTER

INPUT VOLUME

MUTE

1

2

4

0

5

3

F

G

E

A

B

K

I

J

H

C

D

L

7

9

6

8

CONTROLS AND FUNCTIONS

7 En

English

PREPARATION

D Amplifier control buttons

Controls the corresponding functions of a Yamaha amplifier.

A (Power)

Turns your amplifier on and off.

INPUT ( / )

Switches input sources.

VOLUME ( / )

Adjusts the volume.

MUTE

Turns mute on or off.

For details on operations, refer to the manual of your

amplifier.

y

These buttons may not work for some Yamaha amplifiers.

E A (Power) (☞ P.11)

Switches this unit between on and standby mode.

F PURE DIRECT

Turns on or off PURE DIRECT mode. Audio quality will be

improved when PURE DIRECT mode is on.

The digital output and front panel display are turned off

when this unit is in PURE DIRECT mode.

G CLEAR (☞ P.16)

Clears the last programmed track of an audio CD during

program editing mode.

Clears all programmed tracks when playback is stopped

while exiting the program mode.

H PROGRAM (☞ P.16)

Turns on or off program playback mode. In program

playback mode, you can playback tracks of an audio CD in a

programmed sequence.

I SHUFFLE (☞ P.15, 19)

Switches shuffle modes.

J NOW PLAYING (☞ P.18, 21)

Displays playback information when selecting (browsing)

music files, folders, etc.

K RETURN (☞ P.18, 21, 23)

Moves up one level when selecting (browsing) music files,

folders, etc.

L OPTION

This button is not available for this unit.

Note

CONTROLS AND FUNCTIONS

8 En

1 ANALOG OUT terminal (☞ P.9)

Outputs L/R analog audio signals. Connect to your amplifier

or audio system using the RCA stereo cable (supplied).

2 DIGITAL OUT terminal (COAXIAL) (☞ P.9)

Outputs digital audio signals. Connect to your amplifier or

audio system using a coaxial digital audio cable

(commercially available).

3 DIGITAL OUT terminal (OPTICAL) (☞ P.9)

Outputs digital audio signals. Connect to your amplifier or

audio system using an optical cable (commercially

available).

4 NETWORK terminal (☞ P.10)

Connects to a network using a network cable (commercially

available).

5 DC OUT terminal

Supplies power to the Yamaha AV accessories from this

terminal. When using this, set “Accessory” in “System

Config” from the setup menu, to “On” (☞ P.23). For details,

refer to the owner’s manual supplied with the accessory.

6 AC IN socket (☞ P.9)

Connects to an AC outlet using the power cable (supplied).

1 Information display

Displays various information such as the song title.

y

For more information on the messages displayed, see “Front

panel display messages” (☞ P.31).

2 PROGRAM indicator

Lights up when the unit is in program playback mode

(☞ P.16).

3 REPEAT/SHUFFLE indicator (☞ P.14, 18)

Lights up when the unit is in repeat or shuffle mode.

Repeat playback

: REPEAT ALL

: REPEAT ONE

: REPEAT FOLDER

: A-B REPEAT

Shuffle playback

: SHUFFLE ALL

: SHUFFLE FOLDER

Rear panel

245631

Front panel display

1 F P

AB

1 32

9 En

English

PREPARATION

This section describes connections required before playing back with this unit.

• Do not connect the power cable of this unit until all connections are completed.

• You need to connect this unit to an amplifier and speakers before playing back.

• This unit can output digital signals up to 192 kHz/24 bits linear PCM signals.

• Proper playback may not be possible depending on the connected device and environment. Verify the settings and specifications of the

connected playback source device.

1 Connect this unit to your amplifier with

one of the following cables.

1 RCA stereo cable

(supplied)

2 Coaxial digital audio cable

(commercially available)

3 Optical digital cable

(commercially available)

2 Connect the supplied power cable to the

AC IN socket, then plug into an AC

outlet.

y

For details on speaker connections, refer to the manual of your

amplifier or speakers.

When using a digital connection, audio output may be interrupted

at the beginning of a track depending on the audio system

(amplifier, etc.).

CONNECTIONS

Notes

Connecting to an amplifier

R L

COAXIAL OPTICAL

DIGITAL OUTANALOG OUT

21 3

2

1

Power cable

(supplied)

To AC outlet

This unit (CD-N301)

Amplifier Amplifier

* The digital output is turned off when this unit is in

PURE DIRECT mode.

Note

CONNECTIONS

10 En

You can play back music files stored on your PC or NAS, audio contents on the Internet radio, by connecting this unit to

a network.

Connect with a commercially available STP (shielded twisted pair) network cable (CAT-5 or higher, straight-through

cable).

• For details on Internet connection, refer to the owner’s manuals of your network devices.

• If you are using a router that supports DHCP, you do not need to configure any network settings for the unit. If you are using a router

that does not support DHCP, configure the network setting from “Network Config” in the setup menu (☞ P.23).

• Wired connections are recommended for devices other than the mobile to ensure high sound quality.

• Some security software installed on your PC or the firewall settings of network devices (such as a router) may block the access of the

unit to the network devices or the Internet. In this case, change the setting of the security software or network devices.

• When setting the subnet manually, each server must be connected to the same subnet as the unit (☞ P.23).

Connecting to a network (PC/NAS/Internet connection)

Notes

LAN

WAN

PC

NAS

Internet

Modem

Broadband router

This unit (CD-N301)

Network cable

CONNECTIONS

11 En

English

PREPARATION

When you have established all cable connections, turn on this unit and other system components.

With the power switch on, you can switch this unit to on or standby mode by pressing the power button on the remote

control.

When network standby mode is enabled, you can also control the power etc. from a network device.

❚ Operable functions in standby/network standby

To enable network standby mode, set “System Config” → “Network Standby” to “On” from the setup menu (☞ P.23).

y

When no operations are performed for a specific length of time, the unit automatically switches to standby mode (auto power standby).

You can set the time to switch to standby mode in “System Config” → “AutoPowerStdby” from the setup menu (☞ P.23).

Turning on this unit

CD eject AirPlay

Power-on by the

application

Standby

Operable — —

Network Standby

Operable Operable Operable

SELECT

PUSH

PURE DIRECTSOURCE

ENTER

RETURN

Press the power switch to turn this unit on.

12 En

OPERATIONS

Configure your devices connected to the network to play back music files stored on the devices, or configure your mobile

device to control this unit. Use the following configurations to suit your needs.

y

For details on Internet connection, please refer to the manual of your network devices.

❚ If you want to play the music files stored on your PC

You need to configure the media sharing setting of your PC.

Configure the media sharing setting of music files on

Windows Media Player 12. For details on sharing setting,

please refer to “Sharing music files stored on your PC”

(☞ P.13).

y

You can operate from your PC using Windows Media Player. For

details, refer to Windows Media Player help.

❚ If you want to play music files stored on your NAS

You need to configure the media sharing settings of your NAS.

Setup operations differ depending on your NAS. Refer to the

NAS manual.

y

• If you want to configure the network parameters manually, check

that you are using an IP address which is not used by other network

devices in your network.

• In case that you use DHCP and automatically obtain necessary

information for network, such as IP address. We recommend that

DHCP for the NAS normally be enabled.

❚ If you want to play iPod/iTunes with AirPlay

Select this unit from your iPod or from iTunes (☞ P.22).

Check that the router being accessed by the iPod/iTunes is

connected to the same network as this unit.

❚ If you want to operate this unit with your mobile device

You need to download the dedicated application, and install it

(☞ P.3).

y

• If you want to configure the network parameters manually, check

that you are using an IP address which is not used by other network

devices in your network.

• In case that you use DHCP and automatically obtain necessary

information for network, such as IP address. We recommend that

DHCP for the mobile device normally be enabled.

SETUP OF YOUR NETWORK DEVICES

13 En

English

OPERATIONS

To play back music files in your computer with this unit,

you need to make the media sharing setting between the

unit and computer (Windows Media Player 11 or later).

For details on Windows Media Player, please refer to

Windows Media Player help.

y

You can connect up to 16 media servers to this unit.

❚ When using Windows Media Player 12

(on Windows 7)

1 Start Windows Media Player 12 on your

PC.

2 Select “Stream”, then “Turn on media

streaming”.

The Control Panel window of your PC appears.

3 Click “Turn on media streaming”.

4 Select “Allowed” from the drop-down

list next to “CD-N301”.

5 In the same way, select the icons for

devices to be used as external media

controllers (other PCs or mobile

devices), then click “Allowed”.

6 Click “OK” to exit.

❚ When using Windows Media Player 11

1 Start Windows Media Player 11 on your

PC.

2 Select “Library” then “Media Sharing”.

3 Check the “Share my media to” box,

select the “CD-N301” icon, then click

“Allow”.

4 In the same way, select the icons for

devices to be used as external media

controllers (other PCs or mobile

devices), then click “Allow”.

5 Click “OK” to exit.

Sharing music files stored on your

PC

14 En

This unit allows playback of audio CDs and data CDs in which the MP3/WMA files are recorded.

y

For details on playable CDs, see “PLAYABLE DISCS AND FILE FORMATS” (☞ P.33).

Front panel display (example)

The following icons are shown on the front panel display.

1 Press SOURCE repeatedly to switch the

audio source to “CD”.

Main unit/Remote control

2 Set the CD.

Press the (open/close) button on this unit, or press

the OPEN/CLOSE button on the remote control to

open the disc tray, and load a disc.

3 Press / (main unit) or (remote

control) to start playback.

Main unit/Remote control

4 When playback starts, use the following

controls to operate desired functions.

Main unit

PLAYBACK OF CDS

Icon Content

Displayed while a CD is being played back.

Displayed while a CD is paused.

Displayed when a CD is stopped.

Playing back a CD

¡¡¡¡ 1¡¡¡ 0:01

CD

Icon

PURE DIRECTSOURCE

4

123

56

SOURCE

OPEN/CLOSE DIMMER

PURE DIRECT

SOURCE

SELECT/

ENTER

Rotate

Skips to the next track, or back to

the previous track.

Press Plays/Pauses.

Playback

buttons

/

Plays/Pauses.

Stops playback.

/

Press to skip to the next track, or

back to the previous track, or

hold down to search backward/

forward.

SELECT

PUSH

ENTER

RETURN

DISPLAY

SETUP

OPTION

RETURN

ENTER

SELECT

PUSH

ENTER

RETURN

SELECT/ENTER

Playback buttons

PLAYBACK OF CDS

15 En

English

OPERATIONS

Remote control

* Only for audio CDs that contain CD-TEXT.

y

• Files on a data CD are played back in alphanumeric order.

• When CD playback is stopped, playback will resume from the

beginning of the song last played. Pressing while playback

is stopped will clear resume playback.

• You can also check the repeat/shuffle status from the indicators

on the front panel display (☞ P.8).

DISPLAY

SETUP

POP-UP MENU

REPEAT

4

123

56

7

0

89

A/B

SHUFFLE

PROGRAM

SOURCE

OPEN/CLOSE DIMMER

PURE DIRECT

CLEAR

HOME

NOW PLAYING

OPTION

RETURN

ENTER

Numeric

buttons

ENTER

REPEAT SHUFFLE

DISPLAY

Playback

buttons

Numeric buttons Sets the track number.

ENTER

When a music file is selected:

starts playback.

Playback

buttons

Plays/Pauses.

Stops playback.

/

Press to skip to the next track, or

back to the previous track, or hold

down to search backward/forward.

REPEAT

Select the repeat playback

method.

Audio CD:

REPEAT ONE / REPEAT ALL

/ REPEAT OFF

Data CD:

REPEAT ONE / REPEAT

FOLDER / REPEAT ALL /

REPEAT OFF

SHUFFLE

Select the shuffle playback

method.

Audio CD:

SHUFFLE ALL / SHUFFLE

OFF

Data CD:

SHUFFLE FOLDER /

SHUFFLE ALL / SHUFFLE

OFF

DISPLAY

Change the playback information.

Audio CD (during playback):

Playing time → Time remaining

→ Disc time remaining →

Song title* → Artist name →

Album title*

Data CD (during playback):

Playing time → Song title →

Artist name → Album title

PLAYBACK OF CDS

16 En

During audio CD playback, A-B repeat playback allows

you to specify the start and end points for a section that

you want to repeat.

y

A-B repeat playback is only available for audio CDs.

1 Playback the audio CD, and then press

the A/B button on the remote control at

the point you want to start the repeat.

Front panel display (example)

The A-B indicator on the front panel display flashes

during setup.

2 Press the A/B button on the remote

control again at the point where you

want to end the repeat.

The A-B indicator turns lit, and the repeat playback

starts.

3 To stop the repeat playback, stop the

playback, or press the A/B button again.

The repeat playback is cancelled.

In program playback mode, you can play back tracks in a

programmed sequence.

y

Program playback is only available for audio CDs.

1 Press PROGRAM on the remote control

while playback is stopped.

This unit enters program editing mode.

2 Select a track by using the numeric

buttons and press ENTER to confirm.

3 Repeat step 2 to program the next track.

You can program up to 50 tracks.

y

To cancel the programmed track, press CLEAR during program

editing mode. The last programmed track will be deleted.

4 Press / (Play/Pause) on the main

unit or (Play/Pause) on the remote

control.

Playback starts from the beginning of the

programmed sequence.

y

To clear all programmed tracks, press CLEAR while playback is

stopped.

The programmed tracks are cleared when the disc is ejected or

this unit is turned off.

Using A-B repeat playback

DISPLAY

SETUP

POP-UP MENU

REPEAT

7

0

8 9

A/B

SHUFFLE

PROGRAM CLEAR

HOME

NOW PLAYING

OPTION

RETURN

ENTER

A/B

¡¡¡¡¡2¡¡¡¡1:25

CD

AB

Using program playback mode

Note

DISPLAY

SETUP

POP-UP MENU

REPEAT

7

0

8 9

A/B

SHUFFLE

PROGRAM CLEAR

HOME

NOW PLAYING

OPTION

RETURN

ENTER

CLEAR

PROGRAM

ENTER

17 En

English

OPERATIONS

Spotify gives you instant access to millions of songs on your mobile devices. Just hit play to stream anything you like.

The Spotify Connect feature lets you choose music on your Spotify app and listen on your Yamaha home entertainment

system.

See Spotify.com for service area information.

1 Connect your device to your home Wi-Fi

network.

Connect the unit and your mobile device to your

home Wi-Fi network as shown in the illustration

below. All devices need to be on the same network.

Network connection (example)

* iOS/Android™ apps are available as of July 2014.

For more details, visit Spotify.com

y

To use this function, this unit and your mobile device must be

connected to the Internet. For detail on connections and network

settings, refer to “Owner’s Manual”.

2 Get Spotify app and premium free trial.

Download the Spotify app for your mobile device

from your app store, and take the Premium free trial.

3 Turn on the unit and playback of Spotify

contents.

Start Spotify app on your mobile device, log in to

Spotify and start playing a track.

1 Tap on the Now Playing bar to reveal extra

controls and tap the Speaker icon.

2 Select the unit (network name of the unit) as the

audio output device.

Spotify app (example)

y

The playback screen is displayed on the front display.

PLAYBACK OF SPOTIFY SERVICE

The Spotify app and Premium account are required. Visit

spotify.com for details.

www.spotify.com/connect

Internet

Broadband router

This unit (CD-N301)

Mobile device*

Modem

Spotify and Spotify logo are registered trademarks of

the Spotify Group.

1

2

18 En

This unit allows you to play back music files such as MP3, WMA, or FLAC (lossless audio data compression format)

files stored in the computer (server) or NAS connected to the network. Browse the front panel display and select your

favorite music file.

To play back music files in your computer/NAS with this unit, you need to make the media sharing setting to computer/

NAS. For details on sharing setting, please refer to “SETUP OF YOUR NETWORK DEVICES” (☞ P.12).

y

For details on playable music files, see “PLAYABLE DISCS AND FILE FORMATS” (☞ P.33).

Front panel display (example)

The following icons are shown on the front panel display.

1 Press SOURCE repeatedly to switch the

audio source to “Server”.

Main unit/Remote control

2 Use the following controls to select a

desired music file.

Main unit

Remote control

PLAYBACK OF MUSIC FILES ON YOUR PC/NAS

Icon Content

1

Displayed when a folder or music file can

be selected.

Displayed when a folder is selected.

Displayed when a supported music file is

selected.

Displayed while a music file is being

played back.

Displayed while a music file is paused.

2

Displayed when there is lower level in the

current folder.

Operations from the main unit or

remote control

¡¡Pop/Rock

Server

12

PURE DIRECTSOURCE

4

123

56

SOURCE

OPEN/CLOSE DIMMER

PURE DIRECT

SOURCE

SELECT/

ENTER

Rotate Selects a folder or music file.

Press

When a folder is selected:

moves down one level.

When a music file is selected:

starts playback.

RETURN Returns to the previous level.

//

ENTER

/ Selects a folder or music file.

ENTER

When a folder is selected:

moves down one level.

When a music file is selected:

starts playback.

RETURN Returns to the previous level.

HOME Moves to the top level.

NOW PLAYING

Stops browsing and displays

playback information for the

file currently being played.

SELECT

PUSH

ENTER

RETURN

RETURNSELECT/ENTER

DISPLAY

SETUP

POP-UP MENU

REPEAT

A/B

SHUFFLE

HOME

NOW PLAYING

OPTION

RETURN

ENTER

RETURN

//ENTER

HOME

NOW PLAYING

Sivu latautuu ...

Yamaha CD-N301 Omistajan opas

Yamaha CD-N301 Omistajan opas

muilla kielillä

Liittyvät paperit

Muut asiakirjat