Yamaha F01 Omistajan opas

Kategoria
Synthesizer
Tyyppi
Omistajan opas

Tämä käsikirja sopii myös

ES
FR
DE
EN
Owner's Manual
Bedienungsanleitung
Mode d'emploi
Manual de instrucciones
ESPAÑOL
FRANÇAIS
DEUTSCH
ENGLISH
For information on assembling the keyboard stand, refer to the instructions at the end of this manual.
IMPORTANT – Check your power supply –
Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be
provided on the rear of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. The voltage selector is set
at 240V when the unit is initially shipped. To change the setting use a "minus" screwdriver to rotate the selector dial so that the correct voltage appears next to the
pointer on the panel.
Weitere Informationen über die Montage des Keyboard-Ständers erhalten Sie in den Anweisungen am Ende dieses Handbuchs.
WICHTIG —Überprüfung der Stromversorgung—
Vergewissern Sie sich vor dem Anschließen an das Stromnetz, daß die örtliche Netzspannung den Betriebsspannungswerten auf dem Typenschild an der Unterseite
des Instruments entspricht. In bestimmten Regionen ist auf der Rückseite des Instruments in der Nähe des Netzkabels ein Spannungswähler angebracht. Falls
vorhanden, muß der Spannungswähler auf die örtliche Netzspannung eingestellt werden. Der Spannungswähler wurde werkseitig auf 240 V voreingestellt. Zum
Verstellen drehen Sie den Spannungsregler mit einem Schlitzschraubendreher, bis der Zeiger auf den korrekten Spannungswert weist.
Pour obtenir les détails sur l'assemblage du pupitre du clavier, reportez-vous aux instructions figurant à la fin de ce manuel.
IMPORTANT —Contrôler la source d'alimentation—
Vérifiez que la tension spécifiée sur le panneau inférieur correspond à la tension du secteur. Dans certaines régions, l’instrument peut être équipé d’un sélecteur de
tension à l’arrière de l’unité principale, à côté du cordon d'alimentation. Vérifiez que ce sélecteur est bien réglé en fonction de la tension secteur de votre région. Le
sélecteur de tension est réglé sur 240 V au depart d'usine. Pour modifier ce réglage, utilisez un tournevis à lame plate pour tourner le sélecteur afin de mettre
l'indication correspondant à la tension de votre région vis à vis du repère triangulaire situé sur le panneau.
Para información sobre el montaje del soporte del teclado, consulte las instrucciones al final de este manual.
IMPORTANTE —Verifique la alimentación de corriente—
Asegúrese de que tensión de alimentación de CA de su área corresponde con la tensión especificada en la placa de características del panel inferior. Es posible
que en algunas zonas se suministre un selector de tensión en la parte posterior de la unidad principal, junto al cable de alimentación. Asegúrese de que el selector
de tensión esté ajustado a la tensión de su área. El selector de tensión se ajusta a 240V cuando la unidad sale de fábrica. Para cambiar el ajuste, emplee un
destornillador de cabeza "recta" para girar el selector de modo que aparezca la tensión correcta al lado del indicador del panel.
92-469 1 (bottom)
SPECIAL MESSAGE SECTION
PRODUCT SAFETY MARKINGS: Yamaha electronic
products may have either labels similar to the graphics
shown below or molded/stamped facsimiles of these
graphics on the enclosure. The explanation of these
graphics appears on this page. Please observe all cautions
indicated on this page and those indicated in the safety
instruction section.
See bottom of Keyboard enclosure for graphic symbol markings.
The exclamation point within the
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servic-
ing) instructions in the literature
accompanying the product.
The lightning flash with arrowhead
symbol, within the equilateral trian-
gle, is intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s enclo-
sure that may be of sufficient magni-
tude to constitute a risk of electrical
shock.
IMPORTANT NOTICE: All Yamaha electronic products
are tested and approved by an independent safety testing
laboratory in order that you may be sure that when it is
properly installed and used in its normal and customary
manner, all foreseeable risks have been eliminated. DO
NOT modify this unit or commission others to do so
unless specifically authorized by Yamaha. Product perfor-
mance and/or safety standards may be diminished.
Claims filed under the expressed warranty may be denied
if the unit is/has been modified. Implied warranties may
also be affected.
SPECIFICATIONS SUBJECT TO CHANGE: The
information contained in this manual is believed to be
correct at the time of printing. However, Yamaha reserves
the right to change or modify any of the specifications
without notice or obligation to update existing units.
ENVIRONMENTAL ISSUES: Yamaha strives to pro-
duce products that are both user safe and environmentally
friendly. We sincerely believe that our products and the
production methods used to produce them, meet these
goals. In keeping with both the letter and the spirit of the
law, we want you to be aware of the following:
Battery Notice: This product MAY contain a small non-
rechargeable battery which (if applicable) is soldered in
place. The average life span of this type of battery is
approximately five years. When replacement becomes
necessary, contact a qualified service representative to
perform the replacement.
Warning: Do not attempt to recharge, disassemble, or
incinerate this type of battery. Keep all batteries away
from children. Dispose of used batteries promptly and as
regulated by applicable laws. Note: In some areas, the
servicer is required by law to return the defective parts.
However, you do have the option of having the servicer
dispose of these parts for you.
Disposal Notice: Should this product become damaged
beyond repair, or for some reason its useful life is consid-
ered to be at an end, please observe all local, state, and
federal regulations that relate to the disposal of products
that contain lead, batteries, plastics, etc.
NOTICE: Service charges incurred due to lack of knowl-
edge relating to how a function or effect works (when the
unit is operating as designed) are not covered by the man-
ufacturer’s warranty, and are therefore the owners respon-
sibility. Please study this manual carefully and consult
your dealer before requesting service.
NAME PLATE LOCATION: The graphic below indi-
cates the location of the name plate. The model number,
serial number, power requirements, etc., are located on
this plate. You should record the model number, serial
number, and the date of purchase in the spaces provided
below and retain this manual as a permanent record of
your purchase.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Model
Serial No.
Purchase Date
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)
(F01)
(2 wires)
This applies only to products distributed by Yamaha-Kemble Music
(U.K.) Ltd.
(F11)
FCC INFORMATION (U.S.A.)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instruc-
tions contained in this manual, meets FCC require-
ments. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC, to
use the product.
2. IMPORTANT: When connecting this product to acces-
sories and/or another product use only high quality
shielded cables. Cable/s supplied with this product
MUST be used. Follow all installation instructions. Fail-
ure to follow instructions could void your FCC authori-
zation to use this product in the USA.
3. NOTE: This product has been tested and found to com-
ply with the requirements listed in FCC Regulations,
Part 15 for Class “B” digital devices. Compliance with
these requirements provides a reasonable level of
assurance that your use of this product in a residential
environment will not result in harmful interference with
other electronic devices. This equipment generates/
uses radio frequencies and, if not installed and used
according to the instructions found in the users manual,
may cause interference harmful to the operation of
other electronic devices. Compliance with FCC regula-
tions does not guarantee that interference will not occur
in all installations. If this product is found to be the
source of interference, which can be determined by
turning the unit “OFF” and “ON”, please try to eliminate
the problem by using one of the following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300 ohm ribbon
lead, change the lead-in to co-axial type cable.
If these corrective measures do not produce satisfac-
tory results, please contact the local retailer authorized
to distribute this type of product. If you can not locate
the appropriate retailer, please contact Yamaha Corpo-
ration of America, Electronic Service Division, 6600
Orangethorpe Ave, Buena Park, CA90620
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
IMPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
IMPORTANT. The wires in this mains lead are coloured in
accordance with the following code:
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this appa-
ratus may not correspond with the coloured makings iden-
tifying the terminals in your plug proceed as follows:
The wire which is coloured BLUE must be connected to
the terminal which is marked with the letter N or coloured
BLACK.
The wire which is coloured BROWN must be connected to
the terminal which is marked with the letter L or coloured
RED.
Making sure that neither core is connected to the earth ter-
minal of the three pin plug.
IMPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
WARNING: THIS APPARATUS MUST BE EARTHED
IMPORTANT. The wires in this mains lead are coloured in
accordance with the following code:
GREEN-AND-YELLOW : EARTH
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this apparatus
may not correspond with the coloured markings identifying the
terminals in your plug proceed as follows:
The wire which is coloured GREEN-and-YELLOW must be con-
nected to the terminal in the plug which is marked by the letter E
or by the safety earth symbol or colored GREEN or GREEN-
and-YELLOW.
The wire which is coloured BLUE must be connected to the ter-
minal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L or coloured RED.
This applies only to products distributed by Yamaha-Kemble
Music (U.K.) Ltd.
(3 wires)
F11/F01 Owner’s Manual
4
ENGLISH
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
Only use the voltage specified as correct for the instrument. The required
voltage is printed on the name plate of the instrument.
Check the electric plug periodically and remove any dirt or dust which may have
accumulated on it.
Use only the supplied power cord/plug.
Do not place the power cord near heat sources such as heaters or radiators, and
do not excessively bend or otherwise damage the cord, place heavy objects on
it, or place it in a position where anyone could walk on, trip over, or roll anything
over it.
(F11) Be sure to connect to an appropriate outlet with a protective grounding
connection. Improper grounding can result in electrical shock.
Do not open the instrument or attempt to disassemble the internal parts or
modify them in any way. The instrument contains no user-serviceable parts. If it
should appear to be malfunctioning, discontinue use immediately and have it
inspected by qualified Yamaha service personnel.
Do not expose the instrument to rain, use it near water or in damp or wet
conditions, or place containers on it containing liquids which might spill into
any openings. If any liquid such as water seeps into the instrument, turn off the
power immediately and unplug the power cord from the AC outlet. Then have
the instrument inspected by qualified Yamaha service personnel.
Never insert or remove an electric plug with wet hands.
Do not put burning items, such as candles, on the unit.
A burning item may fall over and cause a fire.
If the power cord or plug becomes frayed or damaged, or if there is a sudden
loss of sound during use of the instrument, or if any unusual smells or smoke
should appear to be caused by it, immediately turn off the power switch,
disconnect the electric plug from the outlet, and have the instrument inspected
by qualified Yamaha service personnel.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:
(F11) Always connect the three-pin attachment plug to a properly grounded
power source. (For more information about the main power supply, see
page 15.)
When removing the electric plug from the instrument or an outlet, always hold
the plug itself and not the cord. Pulling by the cord can damage it.
Remove the electric plug from the outlet when the instrument is not to be used
for extended periods of time, or during electrical storms.
Do not connect the instrument to an electrical outlet using a multiple-connector.
Doing so can result in lower sound quality, or possibly cause overheating in the
outlet.
Read carefully the attached documentation explaining the assembly process.
Failure to assemble the instrument in the proper sequence might result in
damage to the instrument or even injury.
Do not expose the instrument to excessive dust or vibrations, or extreme cold or
heat (such as in direct sunlight, near a heater, or in a car during the day) to
prevent the possibility of panel disfiguration or damage to the internal
components.
Do not use the instrument in the vicinity of a TV, radio, stereo equipment,
mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio
may generate noise.
Do not place the instrument in an unstable position where it might accidentally
fall over.
Before moving the instrument, remove all connected cables.
When setting up the product, make sure that the AC outlet you are using is
easily accessible. If some trouble or malfunction occurs, immediately turn off
the power switch and disconnect the plug from the outlet. Even when the power
switch is turned off, electricity is still flowing to the product at the minimum
level. When you are not using the product for a long time, make sure to unplug
the power cord from the wall AC outlet.
Power supply/Power cord
Do not open
Water warning
Fire warning
If you notice any abnormality
Power supply/Power cord
Assembly
Location
(1)B-12
1/2
ENGLISH
F11/F01 Owner’s Manual
5
Before connecting the instrument to other electronic components, turn off the
power for all components. Before turning the power on or off for all
components, set all volume levels to minimum. Also, be sure to set the volumes
of all components at their minimum levels and gradually raise the volume
controls while playing the instrument to set the desired listening level.
In the case of a model with a polished finish, gently remove dust and dirt with a
soft cloth. Do not wipe too hard since small particles of dirt can scratch the
instrument's finish.
When cleaning the instrument, use a soft, dry or slightly damp cloth. Do not use
paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping
cloths.
•Take care that the key cover does not pinch your fingers, and do not insert a
finger or hand in any gaps on the key cover or instrument.
Never insert or drop paper, metallic, or other objects into the gaps on the key
cover, panel or keyboard. If this happens, turn off the power immediately and
unplug the power cord from the AC outlet. Then have the instrument inspected
by qualified Yamaha service personnel.
Do not place vinyl, plastic or rubber objects on the instrument, since this might
discolor the panel or keyboard.
In the case of a model with a polished finish, bumping the surface of the
instrument with metal, porcelain, or other hard objects can cause the finish to
crack or peel. Use caution.
Do not rest your weight on, or place heavy objects on the instrument, and do not
use excessive force on the buttons, switches or connectors.
Do not use the instrument/device or headphones for a long period of time at a
high or uncomfortable volume level, since this can cause permanent hearing
loss. If you experience any hearing loss or ringing in the ears, consult a
physician.
Do not place the bench in an unstable position where it might accidentally fall
over.
Do not play carelessly with or stand on the bench. Using it as a tool or step-
ladder or for any other purpose might result in accident or injury.
Only one person should sit on the bench at a time, in order to prevent the
possibility of accident or injury.
If the bench screws become loose due to extensive long-term use, tighten them
periodically using the included tool.
Some data will be saved to internal memory of the F11/F01 (pages 55, 57). The
data is maintained even when the power is turned off. For maximum data
security Yamaha recommends that you save your important data to the USB
flash memory (F11) or computer (F01). This provides a convenient backup if the
internal memory is damaged (pages 55, 57).
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
Always turn the power off when the instrument is not in use.
Connections
Maintenance
Handling caution
Using the bench (If included)
Saving data
(1)B-12
2/2
F11/F01 Owner’s Manual
6
ENGLISH
About this Owner’s Manual
Thank you for purchasing the Yamaha Digital Piano F11/F01! We recommend that you read this manual carefully so that
you can fully take advantage of the advanced and convenient functions of the F11/F01.
We also recommend that you keep this manual in a safe and handy place for future reference.
About this Owner’s Manual
The documentation for this instrument includes: Owner’s Manual (this document), Quick Operation Guide, and Data
List.
Owner’s Manual
Introduction (page 2):
Please read this section first.
Reference (page 10):
This section explains how to make detailed settings for the F11/F01’s various functions.
Appendix (page 68):
This section introduces reference material.
Quick Operation Guide
This explains the button/key assignments and how to use the panel controls.
Data List
The Data List contains XG voice/XG effect (for the F11) and MIDI related information. The Data List is available for
downloading from the Yamaha Manual Library.
Yamaha Manual Library
http://www.yamaha.co.jp/manual/
*The panel illustrations are taken from the F11.
*The illustrations and LED displays shown in this owner’s manual are for instructional purposes only and may appear
somewhat different from those on your instrument.
(F11) AVE-TCP, a TCP/IP protocol stack by ACCESS Co., Ltd., is installed in this product.
(F01) AVE
®
-SSL, an encryption module technology by ACCESS Co., Ltd., is installed in this product.
Trademarks:
•Windows is the registered trademarks of Microsoft
®
Corporation.
•All other trademarks are the property of their respective holders.
This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with
respect to which it has license to use others’ copyrights. Such copyrighted materials include, without limitation, all
computer software, style files, MIDI files, WAVE data, musical scores and sound recordings. Any unauthorized use of
such programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright
has legal consequences. DON’T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.
This device is capable of using various types/formats of music data by optimizing them to the proper format music
data for use with the device in advance. As a result, this device may not play them back precisely as their producers or
composers originally intended.
Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is
strictly prohibited except for your personal use.
ENGLISH
Accessories
F11/F01 Owner’s Manual
7
Accessories
Owner’s Manual
This manual contains complete instructions for operating your F11/F01.
Quick Operation Guide
Bench
AC Power Cord
Tuning
Unlike an acoustic piano, the instrument does not need to be tuned. It always stays perfectly in tune.
Transporting
If you move to another location, you can transport the instrument along with your other belongings. You can move the
unit as it is (assembled) or you can disassemble the unit.
Tr ansport the keyboard horizontally. Do not lean it up against a wall or stand it up on its side. Do not subject the
instrument to excessive vibration or shock.
F11/F01 Owner’s Manual
8
ENGLISH
Main Features
Main Features
Stylish and sophisticated digital piano
The instrument combines true piano sound in a modern, attractive cabinet that evokes the beauty of a
real acoustic grand piano–adding sophistication and musical expressiveness to your living space.
NW (Natural Wood) keyboard
The special Natural Wood keyboard of the instrument uses real-wood white keys, to reproduce as
closely as possible the experience of playing an actual acoustic grand piano. The authentic touch and
feel of the keys goes far beyond existing electronic keyboards, realistically recreating the hardness of the
keys, the balance between the weight of the key and hammer, and the characteristic weight gradations
of the keys. heavy in the low end, light in the high register. to make you feel as if you’re playing a real
grand piano. Moreover, this specially crafted keyboard lets you use techniques only possible on grand
pianos, such as playing the same note successively and having the sounds blend smoothly even without
use of the damper pedal, or playing the same key quickly and having perfect articulation without the
sound cutting off unnaturally.
Moving Key (F11)
The F11 features an impressive moving keyboard—with the Moving Key function. Whatever songs you
play back on the instrument, including the included 50 piano preset songs (Classic & Jazz), songs saved
to USB flash memory, or songs from the Internet using the streaming service, you can enjoy the perfor-
mance visually as well as aurally. This makes the F11 a wonderful instrument to have at home, as well
as an eye-catching, ear-catching instrument for a restaurant, store or any public space.
AWM Dynamic Stereo Sampling
The F11/F01 offers unmatched sonic realism as well as Yamaha’s original AWM Dynamic Stereo Sam-
pling tone-generation technology for rich, authentic voices. The G. Piano 1 and 2 voices are completely
constructed from samples painstakingly recorded from a full concert grand piano. The G. Piano 1 voice
features three velocity-switched samples (Dynamic Sampling), special “Sustain Sampling that samples
the unique resonance of an acoustic grand pianos soundboard and strings when the damper pedal is
pressed, and “Keyoff Samples” that add the subtle sound produced when the keys are released. These
sophisticated features and advanced technologies ensure that the instrument sounds and plays virtually
the same as an actual acoustic piano.
Internet Direct Connection (IDC) (F11)
Yamaha provides a special streaming service on its website that enables you to automatically play back
a wide variety of songs (song data) in various musical genres as background music directly on your
instrument.
ENGLISH
Table of Contents
F11/F01 Owner’s Manual
9
Introduction
Reference
Appendix
Table of Contents
SPECIAL MESSAGE SECTION ...................... 2
About this Owner’s Manual........................ 6
Accessories .................................................. 7
Main Features ............................................. 8
Table of Contents ....................................... 9
Panel Controls and Terminals................... 10
Accessing Various Background Music
(BGM) Functions .................................... 12
Before Using the F11/F01 ......................... 13
Key Cover ...........................................................13
Music Rest ..........................................................14
Connecting the Power Cord (F11)....................15
Connecting the Power Cord (F01)....................16
Turning the Power On.......................................17
Setting the Volume.............................................17
Using Headphones (option)..............................18
Checking the version number (F11) .................18
Listening to the 50 Piano Preset Songs
(Classic & Jazz) ....................................... 19
Enjoying the Moving Key Feature (F11)...........21
Listening to songs in USB Flash Memory... 22
Handling the USB Storage Device
(USB Flash Memory/Floppy Disk, etc.) .. 25
Handling the Floppy Disk Drive (FDD)
and Floppy Disks .................................... 26
Listening to the Songs on Internet (F11)... 27
Song Auto Revoice (F11)...................................28
Selecting & Playing Voices........................ 29
Selecting Voices..................................................29
Listening to the Voice Demonstration Tunes ..29
Selecting Alternate Voices (VARIATION) .......30
Using the Pedals .................................................30
Combining Two Voices (Dual mode)...............31
Saving the Voice Settings (F11)........................32
Splitting the Keyboard Range and Playing
Two Different Voices (Split mode)...............32
Using the Metronome........................................34
Selecting various digital reverb effects
(REVERB) ......................................................35
Transposition – [TRANSPOSE]........................36
Fine Tuning of the Pitch ....................................36
Touch Sensitivity – [TOUCH] ..........................37
Recording Your Performance.................... 38
Playing Back Recorded Songs ................... 40
Saving Your Recorded Performance to
USB Flash Memory.................................. 41
Internet Direct Connection (IDC) (F11) ... 42
Setting Up the Instrument to the Internet
Connection .................................................... 42
Connecting the Instrument to the Internet ..... 44
About the Internet Settings............................... 45
Checking the field strength
(when using a USB wireless LAN adaptor).. 46
Exporting the Connection Information ........... 47
Initializing Internet Settings.............................. 48
Internet Initial Settings...................................... 48
Glossary of Internet Terms ............................... 49
Connections ..............................................51
Connectors......................................................... 51
Connecting to a Computer ............................... 52
About MIDI................................................53
Data Backup (F11)..................................... 55
Backup Data in Internal Memory..................... 55
Backing Up Data to USB Flash Memory.......... 55
Restoring the Backup Data................................ 56
Data Backup (F01)..................................... 57
Backup Data in Internal Memory..................... 57
Backing Up Data to a Computer ...................... 57
Restoring the Backup Data................................ 57
Message List (F11) ....................................58
Message List (F01) ....................................59
Troubleshooting........................................ 60
Keyboard Stand Assembly ........................61
50 Piano Preset Songs (Classic & Jazz)
List........................................................... 64
Preset Voice List ........................................ 66
Voice Demo Song List ............................... 67
Index..........................................................68
Normal Setting List ...................................70
Program Change ....................................... 71
Specifications ............................................72
F11/F01 Owner’s Manual
10
ENGLISH
Panel Controls and Terminals
Panel Controls and Terminals
The illustrations are taken from the F11.
The jacks and terminals on the underside of the instrument as shown here may seem to be in reverse from your perspec-
tive in front of the instrument. Make sure when using these to carefully check the names as printed on the panel before
making connections.
1 [POWER] switch ..........................p. 17
Turns the power on/off.
2 [VOLUME] control....................... p. 17
Adjusts the volume level.
3 Display ........................................ p. 11
For showing various messages and certain settings of
the instrument. This may be unavailable, depending
on the status.
CAUTION
Do not turn off the power to the instrument while flash-
ing dashes appear in the display (indicating the opera-
tion is in process). Doing so may damage the data.
4 [PRESET 1]/[PRESET 2] lamp ........ p. 19
When this is lit, you can listen to the 50 piano preset
songs (Classic & Jazz).
5 [USB] lamp.................................. p. 22
When this is lit, you can listen to songs contained in
USB flash memory.
6 [USB] access lamp ....................... p. 22
Flashes in red while loading data from USB flash
memory.
7 [INTERNET] lamp (F11) ............... p. 27
When this is lit, you can listen to songs on the Inter-
net.
8 [INTERNET] access lamp (F11)..... p. 27
Flashes in red while accessing to the Internet.
9 [BGM] button ......... pp. 19, 22, 27, 29
Switches the BGM mode on and off for [PRESET 1]/
[PRESET 2]/[USB]/[INTERNET] (F11). For more
information, refer to page 12.
0 [– /NO]/[+/YES] button
For setting values or performing file operations.
PHONES
R
AUX INAUX OUT
L L RR L L R
MIDI USB
OUT
IN TO DEVICE
LM
P
I
JK
1
HG
32 965 8740A
D
CEF
B
ENGLISH
Panel Controls and Terminals
F11/F01 Owner’s Manual
11
A Voice buttons .............................. p. 29
Selects voices from 20 internal sounds including G.
PIANO 1 and 2 (in tandem with the
[VARIATION]
but-
ton). You can also combine two voices at the same time.
B [VARIATION] button .................... p. 30
This lets you call up an alternate setting (for example,
an alternate voice), depending on the selected setting.
C
[MOVING KEY] status lamp (F11) ..p. 21
Lights up in red if an error occurs while using the
Moving Key feature.
D [MOVING KEY] button (F11) ....... p. 21
Enables the Moving Key feature, which automati-
cally moves the keys in response to song playback—
including that of the 50 piano preset songs, songs in
USB flash memory, and songs from the Internet
using the streaming service.
E [PLAY/STOP] button ......pp. 20, 23, 28
For starting/stopping song playback of the 50 piano
preset songs (Classic & Jazz), songs in USB flash
memory, or songs on from the Internet using the
streaming service (F11).
F [REC] button ............................... p. 38
Record your performance.
G [METRONOME] button ............... p. 34
Control the metronome functions.
H [SPLIT] button ............................. p. 32
Allows you to play different voices on the left- and
right-hand sections of the keyboard.
I [PHONES] jacks ........................... p. 18
A set of standard stereo headphones can be plugged
in here for private practice.
J AUX OUT[L/L+R][R] jacks............. p. 51
For connecting recording equipment (such as a cassette
tape recorder), allowing you to record your performance.
K AUX IN[L/L+R][R] jacks ................ p. 51
Sends the output of the F11/F01 to a connected
instrument amplifier, mixing console, PA system, or
recording equipment.
L MIDI [IN][OUT] connectors ......... p. 52
For connecting to a MIDI device, allowing you to
take advantage of various MIDI functions.
M USB [TO DEVICE] terminal........... p. 52
For connecting to a USB flash memory device,
allowing you to save your own recorded songs and
play back songs contained on the device.
N [LAN] port (F11).......................... p. 52
By directly connecting the F11 to the Internet, you can
use the special streaming service on the Yamaha website
that enables you to automatically play back a wide vari-
ety of songs (song data) in various musical genres as
background music directly on your instrument.
CAUTION
Do not directly connect the [LAN] port to your computer.
The Internet functions cannot be used if so connected.
O [AC INLET] connector.......... pp. 15, 16
For connection of the power cord.
P Pedals ......................................... p. 30
For producing a range of expressive effects similar to
those produced by the pedals on an acoustic piano.
Display
•Check the operation on the display of the top panel as you use the instrument.
•The display indicates different values, as shown below, depending on the operation.
LAN
N
O
rear panel
F11
One of the song numbers from “50
Piano Preset Songs (Classic & Jazz)”
Tempo Parameter value
F11/F01 Owner’s Manual
12
ENGLISH
Accessing Various Background Music (BGM) Functions
Accessing Various Background Music
(BGM) Functions
A variety of functions can be called up (as listed below) by switching the [BGM] button on/off.
BGM
Consists of the following:
[PRESET 1]/[PRESET 2]....... Listening to the 50 Piano Preset Songs (Classic & Jazz) (page 19)
[USB]................................... Listening to songs in USB flash memory (page 22), saving your recorded performances to
USB flash memory (page 41)
[INTERNET] (F11)............. Listening to the songs on the internet using the streaming service (page 27)
BGM OFF
Pressing the [BGM] button turns off the [PRESET 1]/[PRESET 2]/[USB]/[INTERNET] (F11) lamps.
Playing Back Recorded Songs (page 40), Recording Your Performance (page 38), Selecting & Playing Voices (Playing)
(page 29)
MOVING KEY ON/OFF (F11)
The Moving Key feature on the F11 makes it possible for the keys of the keyboard to move automatically in response to
song playback. For more information, refer to page 21.
BGM BGM OFF
PRESET
USB
INTERNET (F11) The left lamps are turned off.
12 Playing Back Recorded Songs/Recording Your Performance/Selecting & Playing Voices
MOVING KEY ON/OFF (F11)
ENGLISH
Before Using the F11/F01
F11/F01 Owner’s Manual
13
Before Using the F11/F01
Key Cover
To open the key cover:
1. To open the cover, insert your fingers in the indenta-
tions on its front, lift the cover gently and fold it back.
2. Raise the folded cover and lean it against the front
panel.
To close the key cover:
1. If the music rest (page 14) is raised, lift it up and
against the cover to prevent damage to the panel.
2. Pull the cover down and toward yourself gently.
3. Unfold the cover and gently lower its front half.
CAUTION
Be careful to avoid catching your fingers
when opening or closing the cover.
CAUTION
Be careful to avoid catching your fingers
when opening or closing the cover.
CAUTION
Be careful to avoid catching your fingers
when opening or closing the cover.
CAUTION
Be careful to avoid catching your fingers
when opening or closing the cover.
CAUTION
Hold the key cover with both hands when opening or closing it, and do not release it until it is fully opened or closed.
Be careful to avoid catching fingers (yours or others, and especially those of children) in folding portion or between
the cover and main unit.
F11/F01 Owner’s Manual
14
ENGLISH
Before Using the F11/F01
Music Rest
The music rest is attached to the inside of the key cover.
To position the music rest for use:
Pull the music rest on the cover down and toward yourself.
To replace the music rest:
Lift the music rest up and against the cover.
ENGLISH
Before Using the F11/F01
F11/F01 Owner’s Manual
15
Connecting the Power Cord (F11)
Carefully read the following instructions and warnings before connecting the power cord.
1. Connect the supplied power cord to the [AC INLET] connector on the instrument’s rear panel. For an illustration of the
location of the [AC INLET] connector, see “Panel Controls and Terminals (page 10).
2. Connect the other end of the power cord to an AC outlet. Make sure your F11 meets the voltage requirement for the
country or region in which it is being used.
In some areas, a plug adaptor may be provided to match the pin configuration of the AC wall outlets in your area.
WARNING
Make sure your F11 is rated for the AC voltage supplied in the area in which it is to be used (as listed
on the rear panel). Connecting the unit to the wrong AC supply can cause serious damage to the inter-
nal circuitry and may even pose a shock hazard!
WARNING
Use only the AC power cord supplied with the F11. If the supplied cord is lost or damaged and needs
to be replaced, contact your Yamaha dealer. The use of an inappropriate replacement can pose a fire
and shock hazard!
WARNING
The type of AC power cord provided with the F11 may be different depending on the country in which
it is purchased (a third prong may be provided for grounding purposes). Improper connection of the
grounding conductor can create the risk of electrical shock. Do NOT modify the plug provided with the
F11. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician. Do not
use a plug adapter which defeats the grounding conductor.
(The shape of plug differs
depending on your particular
locale.)
[AC INLET] connector
F11/F01 Owner’s Manual
16
ENGLISH
Before Using the F11/F01
Connecting the Power Cord (F01)
Carefully read the following instructions and warnings before connecting the power cord.
1. Connect the supplied power cord to the [AC INLET] connector on the instrument’s rear panel. For an illustration of the
location of the [AC INLET] connector, see “Panel Controls and Terminals (page 10).
2. Connect the other end of the power cord to an AC outlet. Make sure your F01 meets the voltage requirement for the
country or region in which it is being used.
In some areas, a plug adaptor may be provided to match the pin configuration of the AC wall outlets in your area.
WARNING
Make sure your F01 is rated for the AC voltage supplied in the area in which it is to be used (as listed
on the rear panel). Connecting the unit to the wrong AC supply can cause serious damage to the inter-
nal circuitry and may even pose a shock hazard!
WARNING
Use only the AC power cord supplied with the F01. If the supplied cord is lost or damaged and needs
to be replaced, contact your Yamaha dealer. The use of an inappropriate replacement can pose a fire
and shock hazard!
[AC INLET] connector
(The shape of plug differs
depending on your particular
locale.)
ENGLISH
Before Using the F11/F01
F11/F01 Owner’s Manual
17
Turning the Power On
Press the [POWER] switch.
The power indicator located below the left end of the keyboard lights.
To turn off the power, press the [POWER] switch again.
CAUTION
Never interrupt the power supply while the instrument is loading data from a USB flash memory! Doing so can result in
loss of data.
CAUTION
Even when the instrument is turned off, electricity is still flowing to the instrument at the minimum level. When you are
not using the instrument for a long time or during electrical storms, make sure you unplug the AC power plug from the
wall AC outlet.
Setting the Volume
Initially set the [VOLUME] control about halfway between the “MIN” and “MAX” settings. Then, when you start playing,
re-adjust the
[VOLUME] control to the most comfortable listening level.
CAUTION
Do not use the instrument at a high volume level for a long period of time, or your hearing may be damaged.
TIP
Power indicator
If you close the key cover without turning the power off, the power indicator remains lit, indicating that the
power is still on.
TERMINOLOGY
VOLUME:
The volume level of the entire keyboard sound.
TIP
You can also adjust the [PHONES] output level and the AUX IN input level using the [VOLUME] control.
[POWER]
switch
Power indicator
The level decreases. The level increases.
F11/F01 Owner’s Manual
18
ENGLISH
Before Using the F11/F01
Using Headphones (option)
Connect a pair of headphones to one of the [PHONES] jacks.
Two [PHONES] jacks are provided.
You can connect two sets of standard stereo headphones. (If you are
using only one pair of headphones, you can plug them into either
jack.)
CAUTION
Do not use headphones at a high volume for an extended period of
time.
Doing so may cause hearing loss.
Checking the version number (F11)
You can check the version number of this instrument by simultaneously holding down the [MOVING KEY] button and
pressing A-1 on the keyboard (also see Quick Operation Guide). Press the [–/NO] or[+/YES] button to return to the orig-
inal display.
For instructions about how to update the instrument to the latest version, refer to the Yamaha website:
http://www.music.yamaha.com/idc
PHONES
bottom surface
standard stereo
phone plug
A-1
ENGLISH
Listening to the 50 Piano Preset Songs (Classic & Jazz)
F11/F01 Owner’s Manual
19
Listening to the 50 Piano Preset Songs
(Classic & Jazz)
The instrument features fifty built-in piano preset songs, including both classic pieces and jazz stan-
dards.
1 Turn the power on.
Press the [POWER] switch to turn the power on.
2 Adjust the volume.
Initially set the [VOLUME] control about half way between the “MIN” and
“MAX” settings. Then, when you start playing, re-adjust the [VOLUME] control
to the most comfortable listening level.
3 Turn on the [PRESET 1] or [PRESET 2] lamp.
Press the [BGM] button to turn on the [PRESET 1] or [PRESET 2] lamp. Preset 1
contains a variety of well-known classical music pieces while Preset 2 contains
many popular jazz standards. For a list of all 50 piano preset songs, see page 64.
4 Play any of the 50 piano preset songs.
4-1 Press the [–/NO] or [+/YES] button to select the num-
ber of the song you want to play.
rnd: Play all preset songs continuously
in random order.
ALL: Play all preset songs in sequence.
Sxx: Play all preset songs in each scene
(special sub categories within Classic or Jazz).
1 - 30 (PRESET 1): Select a preset song number and play only the selected song.
31 - 50 (PRESET 2): Select a preset song number and play only the selected song.
4
36
2
-1
45
-2
TERMINOLOGY
On the F11/F01, performance
data is called a “Song”. This
includes voice demonstration
tunes and 50 piano preset
songs (Classic & Jazz).
NOTE
You cannot select the [PRE-
SET 1] and [PRESET 2] lamps
while voice demo song playback
is in use (page 29) or the [REC]
button is on (page 38).
TERMINOLOGY
Random order:
The 50 Piano Preset Songs
(Classic & Jazz) are selected
and played back randomly by
the instrument—similar to the
shuffling of a deck of cards—
when pressing the [PLAY/
STOP] button.
Operation
Song number
F11/F01 Owner’s Manual
20
ENGLISH
Listening to the 50 Piano Preset Songs (Classic & Jazz)
Scene:
The 50 Piano Preset Songs (Classic & Jazz) have been divided into twenty three groups
or categories, to match a variety of listening preferences and to let you select your favor-
ite songs based on a scene description. For instance, if you want to listen to some “Ele-
gant” songs, select scene number 4. The songs that match that category will play
sequentially. For a list of the 50 piano preset songs (Classic & Jazz), see page 64.
Scene Titles:
Classic
Jazz
4-2 Press the [PLAY/STOP] button to start playback.
On the F11, the keys of the keyboard move automatically in response to song
playback (Moving Key). For more information, refer to page 21.
Adjust the Volume
Use the [VOLUME] control to adjust the volume.
5 Stop playback.
Press the [PLAY/STOP] button.
6 Turn the [PRESET 1] or [PRESET 2] lamp off.
Turn the [PRESET 1] or [PRESET 2] lamp off by pressing the [BGM] button.
TIP
Feel free to play the keyboard
along with the preset song. You
can also change the voice play-
ing on the keyboard.
TIP
You can adjust the Reverb Type
(page 35) that is applied to the
voice you play on the keyboard
and for preset song playback.
The Touch sensitivity (page 37)
for the keyboard voice can also
be adjusted to your liking.
NOTE
The default tempo “---” is auto-
matically selected whenever a
new preset song is selected, or
when playback of a new preset
song begins during “rnd” (ran-
dom), “ALL,” or “Sxx” (scene)
playback.
NOTE
When you select a different song
(or a different song is selected
during chained playback), an
appropriate Reverb Type will be
selected accordingly.
NOTE
The data of the 50 piano preset
songs is not transmitted via the
MIDI connectors.
- Home Party
- Morning
- Upbeat
- Elegant
- Relaxing
- Nighttime
- Melancholy
- Mood Music
- Fantasy
- Baroque and Pre-romantic Music
- Pre-romantic (Chopin)
- Post-romantic
- Modern French
- Home Party
- Daytime
- Afternoon
- Evening
- Midnight
- Elegant
- Upbeat
- Ballad
- Innocent
- Mood Music
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78

Yamaha F01 Omistajan opas

Kategoria
Synthesizer
Tyyppi
Omistajan opas
Tämä käsikirja sopii myös