HP LaserJet 8150 Printer series Pikaopas

Hewlett-Packard Company

getting started guide

opsætningsvejledning

installasjonsveiledning

aloitusopas

grundläggande anvisningar

hp LaserJet 8150

C4265-90904

*C4265-90904*

English

HP LaserJet 8150, 8150 N,

8150 DN, 8150 HN, and

8150 MFP Printers

Getting Started Guide ________

Hewlett-Packard Company

11311 Chinden Boulevard

Boise, Idaho 83714 U.S.A.

Company 2000

Reproduction, adaptation, or

translation without prior written

permission is prohibited, except

as allowed under the copyright

laws.

Publication number

C4265-90904

First Edition, October 2000

Warranty

The information contained in

this document is subject to

change without notice.

Hewlett-Packard makes no

warranty of any kind with

respect to this information.

HEWLETT-PACKARD

SPECIFICALLY DISCLAIMS

THE IMPLIED WARRANTY OF

MERCHANTABILITY AND

FITNESS FOR A PARTICULAR

PURPOSE.

Hewlett-Packard shall not be

liable for any direct, indirect,

incidental, consequential, or

other damage alleged in

connection with the furnishing or

use of this information.

Trademark Credits

Acrobat is a trademark of Adobe

Systems Incorporated.

PostScript is a trademark of

Adobe Systems Incorporated

which may be registered in

certain jurisdictions.

Arial, Monotype, and Times

New Roman, are U.S. registered

trademarks of the Monotype

Corporation.

CompuServe is a U.S.

trademark of CompuServe, Inc.

Helvetica, Palatino, Times, and

Times Roman are trademarks of

Linotype AG and/or its

subsidiaries in the U.S. and

other countries.

Microsoft, MS Windows,

Windows and Windows NT are

U.S. registered trademarks of

Microsoft Corporation.

TrueType is a U.S. trademark of

Apple Computer, Inc.

E

NERGY

S

TA R

is a U.S.

registered service mark of the

U.S. EPA.

EN

Contents iii

English

Contents

Installation Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Step 1 Prepare Printer Location. . . . . . . . . . . . . . . . . . . . . . . .8

Step 2 Check Package Contents . . . . . . . . . . . . . . . . . . . . . .10

Step 3 Remove Internal Packaging . . . . . . . . . . . . . . . . . . . .11

Step 4 Locate Printer Parts . . . . . . . . . . . . . . . . . . . . . . . . . .12

Step 5 Install Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Step 6 Install Toner Cartridge. . . . . . . . . . . . . . . . . . . . . . . . .14

Step 7 Load Trays 2 and 3. . . . . . . . . . . . . . . . . . . . . . . . . . .16

Step 8 Load Tray 1 (Optional) . . . . . . . . . . . . . . . . . . . . . . . .18

Step 9 Attach Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Step 10 Install or Change the Control Panel

Overlay (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Step 11 Configure the Control Panel Display Language

(Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Step 12 Test the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Step 13 Connect Printer Cables. . . . . . . . . . . . . . . . . . . . . . .25

Step 14 Install Printing Software . . . . . . . . . . . . . . . . . . . . . .28

Step 15 Verify Printer Setup. . . . . . . . . . . . . . . . . . . . . . . . . .31

FCC Regulations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

iv Contents

EN

5

English

Printer Setup

Congratulations on your purchase of the HP LaserJet 8150 series

printer! This printer is available in five configurations:

HP LaserJet 8150 printer

The HP LaserJet 8150 printer (product number C4265A) comes

standard with 32 MB RAM, wide format printing, two 500-sheet trays,

and a 100-sheet multipurpose tray.

Note The HP LaserJet 8150 requires an optional EIO card to

connect to a Macintosh.

HP LaserJet 8150 N printer

The HP LaserJet 8150 N printer (product number C4266A) comes

standard with 32 MB RAM, wide format printing, two 500-sheet trays,

a 100-sheet multipurpose tray, and an HP JetDirect EIO print server.

HP LaserJet 8150 DN printer

The HP LaserJet 8150 DN printer (product number C4267A) comes

standard with 32 MB RAM, wide format printing, two 500-sheet trays,

a 100-sheet multipurpose tray, an HP JetDirect EIO print server, and

a duplexer (for printing on both sides of paper).

HP LaserJet 8150 HN printer

The HP LaserJet 8150 HN printer (product number C4269A) comes

standard with 32 MB RAM, wide format printing, two 500-sheet trays,

a 100-sheet multipurpose tray, a 2000-sheet input tray (tray 4), a

3000-sheet stacker, an HP JetDirect EIO print server, and a duplexer

(for printing on both sides of paper).

6 Printer Setup

EN

HP LaserJet 8150 MFP printer

The HP LaserJet 8150 MFP printer (product number C4268A) comes

standard with 64 MB RAM, wide format printing, hard disk, two

500-sheet trays, a 100-sheet multipurpose tray, a 2000-sheet input

tray (tray 4), a 3000-sheet Stapler/Stacker, an HP JetDirect EIO print

server, a duplexer (for printing on both sides of paper), a copy

connect EIO board, and an HP Digital Copy.

EN

Installation Checklist 7

English

Installation Checklist

This guide will help you set up and install the new printer. For proper

installation, please complete each section in order:

WARNING! The printer is heavy. HP recommends that four people move it.

Note To learn about all the features and capabilities of the printer, see the

printer user guide and the help menus in the printer drivers (available

after you install the printing software and online user guide).

●

Unpack the printer steps 1-4

●

Install the printer steps 5-12

●

Connect the printer cables step 13

●

Install printing software step 14

●

Verify printer setup step 15

8 Printer Setup

EN

Step 1 Prepare Printer Location

Printer Size

HP LaserJet 8150 Printer Dimensions (Top and Side Views)

35 in (889 mm)

46.75 in (1187 mm)

11.5 in

(292 mm)

14.5 in

(368 mm)

13.75 in

(350 mm)

11.5 in

(292 mm)

29.5 in (749 mm)

EN

Prepare Printer Location 9

English

Printer Weight (without toner cartridge)

●

HP LaserJet 8150 and 8150 N printers: 51 kg (112 lbs)

●

HP LaserJet 8150 DN printer: 54 kg (120 lbs)

●

HP LaserJet 8150 HN printer: 113 kg (249 lbs)

●

HP LaserJet 8150 MFP printer: 136 kg (300 lbs)

Location requirements for the printer

●

A sturdy, level surface for

placement

● Space allowance around the

printer

●

A well ventilated room

●

No exposure to direct sunlight

or chemicals, including

ammonia-based cleaning

solutions

●

Adequate power supply

●

A stable environment—no

abrupt temperature or humidity

changes

●

Relative humidity 20% to 80%

●

Room temperature 50° to 91° F

(10° to 32.5° C)

10 Printer Setup

EN

Step 2 Check Package Contents

Package Contents

Note A printer parallel interface cable is only included with the

HP LaserJet 8150 base printer. See the printer user guide for

ordering information.

Power Cord

Printer Software

CD-ROM

Toner

Cartridge

Control

Panel

Overlay

Printer

Documentation

Printer

EN

Remove Internal Packaging 11

English

Step 3 Remove Internal Packaging

Note

Save all packing material. You may need

to repack the printer at a later date.

WARNING!

This printer weighs approximately 51 kg

(112 lbs). HP recommends that four

people move it.

1 Remove all external packing tape

from the printer.

2 Remove packing material from

standard output bin and protective

film from display.

3 Open the top cover.

4 Remove packing material and tape

and close top cover.

5 Open the left-side door and remove

the two packing spacers. Close the

door.

1

2

3

4

5

12 Printer Setup

EN

Step 4 Locate Printer Parts

The following illustrations give the location and names of the

important printer parts.

Printer Parts (front and rear views)

1

2

3

4

5

Face-up Bin

Control Panel

Standard Output Bin

(Face-down)

Adjustable Paper Stop

Top Cover

6

7

8

9

10

11

Tray 1 (multipurpose)

Tray 1 extensions

Tray 1 paper width guides

Tray 2

Tray 3

Power Switch

12

13

14

15

16

17

Front Door

Parallel Cable Connector

Foreign Interface Harness

(AUX)

HP Fast InfraRed

Connect (FIR)

C-Link Connector

Power Cord Connector

EN

Install Accessories 13

English

Step 5 Install Accessories

Install any accessories that you have purchased with the printer. Use

the installation instructions that are packaged with the accessories.

Optional Accessories

Duplexer

Envelope

Feeder

Printer Stand

2 x 500-sheet

Input Tray

2000-sheet

Input Tray

Multibin Mailbox

(8-Bin)

Multibin Mailbox

(5-Bin with Stapler)

HP Fast InfraRed

Connect

3000-sheet Stapler/Stacker

or 3000-sheet Stacker

7-bin Tabletop

Mailbox

Custom Paper

Tr a y

HP LaserJet MFP Upgrade Kit

HP Digital Copy Stand

14 Printer Setup

EN

Step 6 Install Toner Cartridge

1 Open the printer’s top cover.

2 Remove the toner cartridge from its

packaging. (Save packaging for

possible cartridge storage.)

Note

To prevent damage to the toner

cartridge, do not expose it to light for

more than a few minutes.

3 Rotate the cartridge and gently

shake it from side to side to

distribute the toner evenly inside the

cartridge.

4 Locate the sealing tape tab on the

end of the cartridge. Carefully bend

the tab back and forth until it

separates from the cartridge.

Continued on the next page.

1

EN

Install Toner Cartridge 15

English

5 Firmly pull the tab straight out from

the cartridge to remove the entire

length of tape. Avoid touching any

black toner on the tape.

Note

If the tab separates from the tape, grasp

the tape and pull it out of the cartridge.

Note

If toner gets on your clothing, wipe it off

with a dry cloth and wash clothing in cold

water. (Hot water sets toner into fabric.)

6 Position the cartridge as shown with

the arrow pointing into the printer.

7 Slide the cartridge into the printer as

far as it will go.

8 Close the top cover.

7

6

8

16 Printer Setup

EN

Step 7 Load Trays 2 and 3

Note

To avoid a paper jam, never open the

tray while it is in use.

The paper size setting is set to a default

size at the factory. For example, the

default for the United States is letter-

size, while in Europe it is A4. If you

would like to use a different default paper

size, reconfigure the paper tray setting.

1 Open Tray 2 until it stops.

2 Remove the packing spacer and

tape.

3 If you wish to load paper that is

different than the default size, turn

the paper guide to the mark that

indicates the size of paper you are

loading.

4 Turn the paper guide to the locked

position.

5 Adjust the left paper guide by

pushing in, then lifting up and out.

Continued on the next page.

1

2

3

4

5

EN

Load Trays 2 and 3 17

English

6 Position the guide over the

appropriate lines marked in the tray.

Press the guide into the rear slot and

then lower down into the front slot.

Be sure the guide is not skewed.

7 Insert up to 500 sheets of paper into

the tray. Do not fill the input tray

above the paper fill marks on the

guide.

a Load Letter or A4 paper with the

top of the page toward the rear of

the tray and with the side-to-be-

printed down for single-sided

printing.

For two-sided printing, load the

top of the page toward the rear of

the tray and with the first side-to-

be-printed up.

b Load short-edge fed media with

the top of the page toward the

right side of the tray and with the

side-to-be-printed down for single-

sided printing.

For two-sided printing, load media

with the top of the page toward the

left side of the tray and with the

first side-to-be-printed up.

8 Make sure the paper size tab is set

correctly.

9 Slide the tray back into the printer.

If you wish to select your paper by type

rather than tray (source), see your online

user guide.

If you wish to print on paper sizes larger

than letter or A4, adjust the paper stop

guide on the Standard Output Bin (Face-

down). (See your online user guide for

instructions.)

6

7

8

9

18 Printer Setup

EN

Step 8 Load Tray 1 (Optional)

Tray 1 is a multi-purpose tray and holds

up to 100 sheets of paper or 10

envelopes.

Tray 1 provides a convenient way to print

envelopes, transparencies, custom-size

paper, labels, or other types of media

without having to unload the other trays.

CAUTION

To avoid a paper jam, never add or

remove paper from Tray 1 while the

printer is printing.

To avoid damaging the printer, print

labels, envelopes, and transparencies

from Tray 1 only. Send them to the Face-

up Bin, do not print them on both sides,

and remove them promptly.

Note

Paper loaded in Tray 1 will be printed first

unless the Tray 1 setting is changed from

the printer control panel. To change the

order in which trays will be printed from,

see your online user guide.

1 Open Tray 1.

2 Pull out the tray extension, if needed

for the paper size you are printing.

3 Slide the paper width guides to the

appropriate size marked on the tray.

4 Place paper into the tray without

stacking it above the paperfill mark.

Continued on next page.

Sivu latautuu...

HP LaserJet 8150 Printer series Pikaopas

Tämä ohje sopii myös

HP LaserJet 8150 Printer series Pikaopas

muilla kielillä

Aiheeseen liittyviä papereita

Muut asiakirjat