ENGLISH
1
s
CDV-W901
Natural Sound CD/CDV/LD Player
L'
NTSC
CONTENTS
IMPORTANT!
Please record the serial number of this unit in the space
below.
Model : CDV-W901
Serial No. :
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future
reference.
WARNING
To reduce the risk of fire or electric shock, do not expose
this unit to rain or moisture.
This unit is designed for your enjoyment in your home.
We cannot be liable for the quality of the unit if you use it
for business use.
So please do not use this unit for business use.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE, REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
÷ Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert you to the presence
of uninsulated “dangerous voltage” within the product's
enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert you to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
OWNER’S MANUAL
ACCESSORIES .......................................................................... 4
PRECAUTIONS ......................................................................... 5
TYPES OF DISCS WHICH CAN BE PLAYED
WITH THIS UNIT ....................................................................... 6
GLOSSARY ............................................................................... 7
CONNECTIONS ......................................................................... 8
NAMES OF PARTS
Front panel ......................................................................... 10
Display window .................................................................. 10
Remote control unit ........................................................... 11
BASIC OPERATION (PLAYBACK OF A DISC) ........................ 12
MOVIE DISC ENTERTAINMENT ............................................. 14
SINGING ALONG WITH KARAOKE ENTERTAINMENT .......... 15
APPLIED OPERATIONS .......................................................... 16
QUICK SCANNING OF DISC CONTENTS ............................... 20
RANDOM PLAYBACK (PLAYBACK IN ORDER
SELECTED BY THE PLAYER) ................................................. 20
TO SEARCH FOR A DESIRED FRAME ................................... 21
PROGRAMMED PLAYBACK (PLAYING CHAPTERS /
TRACKS BY CHANGING THEIR ORDER AS REQUIRED) ....... 22
REPEAT PLAYBACK ................................................................ 23
ON-SCREEN DISPLAY ............................................................ 24
TROUBLESHOOTING ............................................................. 25
SPECIFICATIONS .................................................................... 27
2
SAFETY INSTRUCTIONS
1 Read Instructions – All the safety and operating
instructions should be read before the appliance is
operated.
2 Retain Instructions – The safety and operating
instructions should be retained for future reference.
3 Heed Warnings – All warnings on the appliance and in
the operating instructions should be adhered to.
4 Follow Instructions – All operating and use instructions
should be followed.
5 Cleaning – Unplug this video product from the wall
outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
Exception: A product that is meant for uninterrupted
service and that for some specific reason, such as the
possibility of the loss of an authorization code for a
CATV converter, is not intended to be unplugged by the
user for cleaning or any other purpose, may exclude the
reference to unplugging the appliance in the cleaning
description otherwise required in item 5.
6 Attachments – Do not use attachments not
recommended by the video product manufacturer as
they may cause hazards.
7 Water and Moisture – Do not use this video product
near water – for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub, in a wet basement, or near
a swimming pool, and the like.
8 Accessories – Do not place this video product on an
unstable cart, stand, tripod, bracket, or table. The video
product may fall, causing serious injury to a child or
adult, and serious damage to the appliance. Use only
with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the
video product. Any mounting of the appliance should
follow the manufacturer's instructions, and should use a
mounting accessory recommended by the
manufacturer.
8A An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and
uneven surfaces may cause the
appliance and cart combination to
overturn.
9 Ventilation – Slots and openings in the cabinet are
provided for ventilation and to ensure reliable operation
of the video product and to protect it from overheating,
and these openings must not be blocked or covered.
The openings should never be blocked by placing the
video product on a bed, sofa, rug, or other similar
surface. This video product should never be placed
near or over a radiator or heat register. This video
product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is
provided of the manufacturer's instructions have been
adhered to.
10 Power Sources – This video product should be
operated only from the type of power source indicated
on the marking label. If you are not sure of the type of
power supply to your home, consult your appliance
dealer or local power company. For video products
intended to operate from battery power, or other
sources, refer to the operating instructions.
11 Grounding or Polarization – This video product is
equipped with a polarized alternating-current line plug
(a plug having one blade wider than the other). This
plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
Alternate Warnings – This video product is equipped
with a 3-wire grounding-type plug, a plug having a third
(grounding) pin. This plug will only fit into a grounding-
type power outlet. This is a safety feature. If you are
unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the grounding-type plug.
12 Power-Cord Protection – Power-Supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
appliance.
13 Lightning – For added protection for this video product
receiver during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug
it from the wall outlet and disconnect the antenna or
cable system. This will prevent damage to the video
product due to lightning and power-line surges.
14 Power Lines – An outside antenna system should not
be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken
to keep from touching such power lines or circuits as
contact with them might be fatal.
ENGLISH
3
We
Want You
LISTENING
For A Lifetime
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association's
Consumer Electronics Group want you to get the most out
of your equipment by playing it at a safe level.
One that lets the sound come through loud
and clear without annoying blaring or
distortion – and, most importantly, without
affecting your sensitive hearing. Since
hearing damage from loud sounds is often
undetectable until it is too late, YAMAHA
and the Electronic Industries Association's
Consumer Electronics Group recommend
you avoid prolonged exposure to excessive
volume levels.
15 Overloading – Do not overload wall outlets and
extension cords as this can result in a risk of fire or
electric shock.
16 Object and Liquid Entry – Never push objects of any
kind into this video product through openings as they
may touch dangerous voltage points or short-out parts
that could result in a fire or electric shock. Never spill
liquid of any kind on the video product.
17 Servicing – Do not attempt to service this video product
yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
18 Damage Requiring Service – Unplug this video product
from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a.When the power-supply cord or plug is damaged.
b.If liquid has been spilled, or objects have fallen into
the video product.
c.If the video product has been exposed to rain or
water.
d.If the video product does not operate normally by
following the operating instructions. Adjust only those
controls that are covered by the operating instructions
as an improper adjustment of other controls may
result in damage and will often require extensive work
by a qualified technician to restore the video product
to its normal operation.
e.If the video product has been dropped or the cabinet
has been damaged.
f. When the video product exhibits a distinct change in
performance – this indicates a need for service.
19 Replacement Parts – When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock or other hazards.
20 Safety Check – Upon completion of any service or
repairs to this video product, ask the service technician
to perform safety checks to determine that the video
product is in proper operating condition.
FCC INFORMATION (U.S.A.)
1.
IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved
by Yamaha may void your authority, granted by the
FCC, to use the product.
2. IMPORTANT: When connecting this product to
accessories and/or another product use only high
quality shielded cables. Cable/s supplied with this
product MUST be used. Follow all installation
instructions. Failure to follow instructions could void
your FCC authorization to use this product in the
USA.
3. NOTE: This product has been tested and found to
comply with the requirements listed in FCC
Regulations, Part 15 for Class "B" digital devices.
Compliance with these requirements provides a
reasonable level of assurance that your use of this
product in a residential environment will not result in
harmful interference with other electronic devices.
This equipment generates/uses radio frequencies
and, if not installed and used according to the
instructions found in the users manual, may cause
interference harmful to the operation of other
electronic devices. Compliance with FCC
regulations does not guarantee that interference will
not occur in all installations. If this product is found
to be the source of interference, which can be
determined by turning the unit "OFF" and "ON",
please try to eliminate the problem by using one of
the following measures:
Relocate either this product or the device that is
being affected by the interference.
Utilize power outlets that are on different branch
(circuit breaker or fuse) circuits or install AC line
filter/s.
In the case of radio or TV interference, relocate/
reorient the antenna. If the antenna lead-in is 300
ohm ribbon lead, change the lead-in to coaxial type
cable.
If these corrective measures do not produce
satisfactory results, please contact your local retailer
authorized to distribute this type of product. If you
can not locate the appropriate retailer, please
contact Yamaha Electronics Corp., U.S.A. 6600
Orangethorpe Ave, Buena Park, CA90620
The above statements apply ONLY to those
products distributed by Yamaha Corporation of
America or its subsidiaries.
4
CAUTION
The apparatus is not disconnected from the AC power
source so long as it is connected to the wall outlet,
even if the apparatus itself is turned off.
NOTE:
Please check the copyright laws in your country before
recording from records, compact discs, radio, etc.
Recording of copyrighted material may infringe copyright
laws.
DANGER
The use of optical instrument with this product will
increase eye hazard.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
Laser Diode properties
Material: GaAlAs
Wavelength: 780 nm
Emission Duration: Continuous
Laser Output Power: less than 44.6 µW*
* This out-put value measured at a distance 200 mm
from the objective lens surface on the optical pick-up
block.
ANSI Class: Class 1
As the laser beam used in this player is harmful to the
eyes, do not attempt to disassemble the cabinet. Refer
servicing to qualified personnel only.
To avoid electrical shock, do not open the unit. Refer
servicing to qualified personnel only.
This unit has been designed for use with the NTSC
format, which is the television format used in North
America and some other areas. Do not use discs or
a TV made for other television formats (PAL,
SECAM) with this unit.
CAUTION (FOR CANADA MODEL)
TO PREVENT ELECTRIC SHOCK , MATCH WIDE
BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT.
ATTENTION (POUR LE MODELE CANADIEN):
POUR ÉVITER LES CHOCS ÉLECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE DE LA PRISE
ET POUSSER JUSQU’AU FOND.
This Class B digital apparatus meets all requirements of
the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la Classe B respecte toutes
les exigences du Règlement sur le matériel brouilleur du
Canada.
ACCESSORIES
When unpacking the player, first check to make sure that all of the accessories listed below are supplied.
Audio cord
(RCA plug × 2 Ô RCA plug × 2)
Use to connect the player to a TV etc.
Remote control unit
Size "AAA" (IEC R03)
dry cell batteries x 2
Video cord (RCA plug Ô RCA plug)
Use to connect the player to a TV
etc.
ENGLISH
5
PRECAUTIONS
When FM or AM stations are being received, signal noise may be
generated if the player is turned on. Turn off the player when not
in use. Also, if there is signal noise when receiving radio stations
with an indoor antenna, adjust the position or direction of the
antenna.
CONDENSATION
Moisture will form in the operating section of the play-
er if the player is brought from cool surroundings into
a warm room or if the temperature of the room rises
suddenly. When this happens, the player’s performance
will be impaired.
To prevent this, let the player stand in its new sur-
roundings for about an hour before switching it on, or
make sure that the room temperature rises gradually.
Condensation may also form during the summer if the player is
exposed to the breeze from an air conditioner. In such cases,
change the location of the player.
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by
tugging the cord and never touch the power cord when your hands
are wet as this could cause a short circuit or electric shock. Do not
place the unit, a piece of furniture, etc., on the power cord, or
pinch the cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such a way that they are
not likely to be stepped on. A damaged power cord can cause fire
or give you an electrical shock. Check the power cord regularly.
When you find it damaged, ask your nearest authorized YAMAHA
service center or your dealer for a replacement.
CLEANING CARE
Use a soft, dry cloth for cleaning. For stubborn dirt, soak the cloth
in a weak detergent solution; wring well first and wipe. Use a dry
cloth to wipe it dry. Do not use any volatile agents such as
benzine or paint thinner, as they may damage the surface of the
player.
Only one disc can be loaded at any one time. Loading
LaserDisc, Compact Disc, 8 cm Compact Disc or Com-
pact Disc with Video on top of one another may result
in a breakdown, or in scratching of the discs. Please
only load one disc at a time.
This player is to be used exclusively with the NTSC col-
or system. Please use NTSC LaserDiscs only. PAL and
SECAM system discs cannot be used with this player.
Abnormal functioning of this unit may be caused
by lightning, static electricity, or other external in-
ter-ference. To restore normal operation, unplug
the AC power cord and then plug it in again.
LD/CD lens cleaner
The player's pickup lens should not become dirty in normal use,
but if for some reason it should malfunction due to soiling, ask
your nearest authorized YAMAHA service center. Lens cleaners
for LD/CD players are commercially available, but special care should
be exercised in their use since some may cause damage to the
lens.
If it becomes necessary to transport or ship this unit in the
future, be sure to first remove the disc (if loaded), and re-
tract the disc table to its closed position. Then turn the
power off, and, after the “OFF” display goes out on the
display, disconnect the power cord.
INSTALLING THE PLAYER
÷ Place the player on a stable platform next to the television
and stereo system to be used with the player.
÷ Do not place heavy objects such as a television or TV
monitor on top of the player.
÷ Do not place the player on top of your TV set or TV moni-
tor. Also, keep the player away from devices such as cassette
decks which are sensitive to magnetic fields.
DO NOT INSTALL THE PLAYER IN THE FOLLOW-
ING LOCATIONS
÷ In a place subject to direct sunlight.
÷ In humid or poorly ventilated places.
÷ In extremely hot or cold places.
÷ In a place subject to vibrations.
÷ In a dusty place.
÷ In a place subject to soot, steam or heat (in a kitchen, etc.)
AVOID SOURCES OF HEAT
Do not put the player on sources of heat, such as an amplifier.
When installing with audio components on a rack, avoid compo-
nents that generate heat, by placing the player below such com-
ponents where there is adequate ventilation and not much dust.
Avoid placing the player on surfaces such as shaggy carpets, beds,
and sofas which may block ventilation under the player and cause
damage.
CAUTION
Even when the player is in the pause mode, the disc-drive motor is
still revolving. Since leaving the player in this condition can shorten
the lifetime of the motor, do not leave the player in the pause
mode for long periods of time. Also, to prevent the damage to the
screen, do not use the unit for long periods of time under condi-
tions in which the screen display (monitor) continuously displays
characters (for example, power-ON mode, CD PLAY, PAUSE or
DEMO mode).
With LD discs, if playback is paused for about 20 minutes, the
player will automatically enter stop mode.
STRIPE PATTERNS APPEARING ON A TV PRO-
GRAM
Stripe patterns may appear during a TV program if the player unit is
turned on, depending on the quality of reception of the TV sta-
tion. This is neither a malfunction of the television nor the player. If
stripes appear while watching the TV, or when watching the TV for
long periods of time, turn the player off.
6
'
CDV
CD
Æ
VSD
LASER DISC
L
;
æ
This unit is a CD/CDV/LD compatible laserdisc player.
÷ The marks shown in the following table are found on the label
or jacket of each disc.
This player is capable of playing the 7 types of discs listed
below without using an adapter.
÷ To prevent a malfunction, do not use an 8-cm (3 in.) adapter (for
CD) or a 20-cm (8 in.) adapter (for LD).
CD
12 cm (5 in.)/
single-side
CD single
8 cm (3 in.)/
single-side
CDV
12 cm (5 in.)/
single-side
VSD
12 cm (5 in.) /
single-side
LD
30 cm
(12 in.)/
double-side
LD
20 cm (8 in.)/
double-side
LD single
20 cm (8 in.)/
single-side
Types of playable
discs and their marks
Max. playback time
Diameter/Playable sides
74 minutes
20 minutes
Digital audio 20 min.
Digital audio
+ Video 5 min.
Digital audio
+ Video 5 min.
1 hour
2 hours
28 min.
40 min.
14 min.
20 min.
CAV
CLV
CAV
CLV
CAV
CLV
÷ There are some discs marked with the L mark instead of the
Æ mark.
÷ There are some discs without the æ mark.
* This is the unified symbol mark of LASERDISC (LaserVision
videodisc).
LaserDisc players and discs which bear this symbol and use the
same television system, are mutually compatible.
** A Digital Audio with Multi Audio Disc (CD VIDEO LD) and a CDV
(CD Video CDV) are referred to as CD Video discs. CD Video-
discs are recorded with subcodes, which are the non-audio re-
cordings of TOC (Table of Contents) data such as track num-
bers, index numbers, etc. However, there are some discs with-
out these marks.
CD , CDV
How to hold a disc
Holding with two
hands
Hold by two opposite
edges of the disc.
Holding with one
hand
Hold by hooking two
fingers across the
center hole and edge.
*
*
**
Do not attach paper.
Do not touch the disc surfaces.
Wipe along the radii.
Flat board
Inner bag
Flat board
LaserDisc
**
Never use a cracked or warped disc.
To avoid danger, never attempt to play a cracked or deformed disc,
or a disc which has been mended using an adhesive agent, etc.
Also do not use an analog record spray or static prevention agent
for these will crack the laserdisc surface.
Care of disc
To maintain high video and audio quality, clean the disc if it gets
dirty clean by wiping the disc surface with a soft cloth. When
wiping, be sure to move the cloth in straight directions from the
center of the disc toward the outer edge. Do not wipe in a circular
direction like you do with analog records.
LD
Heavy books (4 to 5 kg (10 lbs))
VIDEO
SINGLE
DISC
The Video CD is a disc holding up to 74 minutes of digital
video and audio signals, when recorded in the MPEG format.
Caution
or
cannot be played
with this player.
VIDEO CD
÷ Do not use an analog record cleaner, benzine, thinner or static
prevention agent.
Storage
After playback, be sure to take out the disc from the player, put
the disc in the jacket or case and store it vertically. To prevent the
discs from warping, do not store jackets or cases at an angle or
stack them horizontally. Also do not store them in a place subject
to direct sunlight or under high temperature and humidity.
÷ If a LaserDisc is deformed, place it in the inner bag, put the bag
between two flat boards, place a weight of 4 to 5 kg (10 lbs) on
the boards and leave them for about a day. This may some-
times reduce the warp or other deformation.
TYPES OF DISCS WHICH CAN BE PLAYED WITH THIS UNIT
ENGLISH
7
GLOSSARY
LD terms
Chapter number
Just like the numbers assigned to chapters of a book, the
LD disc is divided into several chapters and each of them is
assigned a chapter number. If the chapter numbers are
recorded on the disc, it is possible to perform operations
such as the chapter search which quickly searches the de-
sired chapter.
÷ Some LD discs do not contain recorded chapter num-
bers.
Frame number
A frame number is assigned to every frame on a CAV disc.
This makes possible operations such as the frame search
which searches desired images based on their frame num-
bers.
Time number
This refers to the elapsed playing time from the beginning
of the disc that is recorded on CLV discs as well as on CAV
discs with a TOC*1. This allows operations such as the
time number search which searches desired images based
on their time numbers.
CDV/CD terms
Track number
The CDV or CD disc is divided into several tracks and each
of them is assigned a track number. With the CDV disc, the
track numbers are recorded across the audio and video
parts. This allows operations such as the track search which
quickly searches the desired track.
TOC (*1)
CD and CDV discs contain non-audio information called TOC
the (Table Of Contents) at the beginning of the disc. As this
name implies, the TOC contains information on the number
of tracks and their playing time just like the table of con-
tents of a book.
÷ Some LD discs are not provided with a TOC section.
÷ The LD with TOC and the CDV belong to the same
category of "optical video disc systems with digital au-
dio".
CD video system
The CD video system is the unified name given to "optical
video disc systems with digital audio".
The systems belonging to this category include;
÷ CDV disc (CD VIDEO, CDV)
÷ LD with subcode and digital audio
÷ CD/CDV compatible player
÷ CD/CDV/LD compatible player
Æ
LD (LaserDisc)
LaserDiscs include a standard play disc (CAV) and an ex-
tended play disc (CLV) depending on the signal recording
formats.
CAV
[Standard Play/CAV] or simply [Standard Play] is indicated
on the jacket or label of the disc.
CLV
[Extended Play/CLV] or simply [Extended Play] is indicated
on the jacket or label of the disc.
LaserDisc with digital audio
This type of disc contains the recording of a digital audio
signal in addition to an analog audio signal. It allows you to
enjoy the high-quality video of an LD and digital sound at
the same time.
¬ or :
Multi-audio disc with digital audio
This type of disc contains different audio information in
digital audio and analog audio.
¬ and MULTI AUDIO or :K
The digital and analog audio can be switched over to enjoy
different audio information.
CDV (Compact Disc with Video)
÷ This CD contains the video part. Among the 25-minute
playing time of the CDV, 20 minutes contain a similar
digital audio to an ordinary CD (audio part) and the re-
maining 5 minutes contain a video plus digital audio (vid-
eo part).
8
CONNECTIONS
Connection method (Be sure to plug the cords securely deep into the connectors.)
1
Connect the VIDEO OUT jack of the player to the video input jack of a TV (or a TV monitor).
If the TV set has an S VIDEO input jack, connect it using an S VIDEO cable which is available in audio/video stores.
For use of the S VIDEO cable, also read the operating instructions of the TV,
2
Connect the AUDIO OUT jacks of the player to the audio input jacks of the TV.
3
Finally plug the power cord into a household power outlet (which should permanently be supplied with power).
Also read the instruction manual of the TV.
Connection with a TV set equipped with Video/Audio inputs
AC-3 RF OUT terminal:
This terminal is intended for use with Dolby* AC-3 (*1) compo-
nents
With this terminal, you will be able to connect an AC-3 RF
input to amplifiers and surround processors, and playback laser
discs formatted with Dolby AC-3 (*2).
(∗1) Indicated with (For hardware)
(∗2) Indicated with (For software)
You cannot playback currently available laser discs, laser disc
players, AV amplifiers, etc., with this terminal.
Do not connect this terminals to the audio input terminal of a
normal stereo or AV amplifiers.
V
L
R
12
1
2
OFF ON
V
L
R
VIDEO
OUT
S-VIDEO
OUT
ATTENUATOR
AUDIO OUT
OPTICAL
DIGITAL OUT
2/R 1/L
2
1
S VIDEO
VIDEO
OUT
AUDIO
R
L
AC-3 RF OUT
OFF ON
ATTENUATOR
S VIDEO plug
Check the
positions of
the holes of
the S VIDEO
jack before
insertion.
S VIDEO input jack
Commercially-available
S VIDEO cable
VIDEO input jack
Accessory video cord
AUDIO input jacks (A/V TV)
Plug into a
household power
outlet after
completing all
connections.
7 ATTENUATOR switch
Usually, set this switch to the OFF position.
Set to ON when the audio is distorted during karaoke singing.
Usually OFF
* "Dolby", "AC-3" and the double-D symbol are trademarks of Dolby
Laboratories Licensing corporation.
Accessory audio cord
•
•
•
•
•
ENGLISH
9
CONNECTIONS
Connection of an additional stereo amplifier
Stereo amplifier
Plug into a
household power
outlet after
completing all
connections.
This connection diagram shows how to connect the audio output to a stereo amplifier while the video output is connected to a TV as shown on
page 8.To reproduce the audio of a Compact Disc or an LaserDisc with improved quality, it is recommended to connect the player to a stereo
amplifier.
Connect the AUDIO OUT jacks to the input jacks labeled LD, CD or AUX, etc. (Never connect to the PHONO input
jacks.)
Also read the operating instructions of your stereo amplifier.
INSERTING BATTERIES INTO THE REMOTE
CONTROL UNIT
1 Open the battery compartment cover on the back of the re-
mote control unit. Press the tab and open the cover in the
direction of the arrow.
2 Take out the two accessory size "AAA" (IEC R03) dry cell batter-
ies, and insert them into the battery compartment in accor-
dance with the display (ª, ·) inside the compartment.
3 Close the cover of the battery compartment.
1
Incorrect use of batteries may cause leakage or rupture.
Always be sure to follow these guidelines:
A. Always insert batteries into the battery compartment cor-
rectly matching the positive ª an negative · polarities, as
shown by the display inside the compartment.
B. Never mix new and used batteries.
C. Batteries of the same size may have different voltages, de-
pending on brand. Do not mix different brands of batteries.
2
3
Commercially-available
optical cable
Accessory audio cord
•
10
NAMES OF PARTS
4
1
¢
¡
'
AB
CD LD
7
3
L
OPEN/CLOSE
STOP
PLAY
PAUSE
ONETOUCH
KARAOKE
LAST
MEMORY
8
SIDE
MIC
LEVEL
MIC1212
ECHOKEY CONTROL
KARAOKE
BASS
EXTENSION
DISPLAY
OFF
QUICK
TURN
STANDBY
POWER
Ii
NATURAL SOUND CD CDV LD PLAYER
CDV-W901
s
°
100 100100
AC-3
RF
OUT
CD disc tableLD disc table
Front Panel
indicates the page where the control is
explained.
P. 12
P. 12
P. 12
P. 12
P. 12
P. 12
7: STOP button
4¢: CHAPTER buttons
1¡: SEARCH buttons
8: PAUSE button
3: PLAY button
OPEN/CLOSE button
(0 LD)
OPEN/CLOSE button
(0 CD)
DISC SIDE A/B
button
P. 13
P. 16
Displays the channel(s) with
audio output(s).
Displays the remaining play
time.
Displays the chapter number or
track number.
: Disc table open/close
: Play
: Pause
Displays the frame number or elapsed time.
Display window
QUICK TURN button
DISPLAY OFF button
Remote control sensor
P. 15
ONE-TOUCH
KARAOKE button
P. 15
KEY CONTROL buttons
P. 15
MIC VOL controls
MIC jacks
BASS EXTENSION button
P.
P. 15
P. 15
P. 11
P. 14
P. 14
CHP / TRK TOTAL 1 / L
ONE-TOUCH
REMAIN 2 / R
KARAOKE
ECHO controls
Displays the total playing time of one side.
Lights when ONE-TOUCH KARAOKE
is activated.
Lights when a micro-
phone plug is inserted
into the MIC jack.
POWER button/STANDBY
indicator
Displays the functions being operated, etc.
: Disc table being opened
: Disc table being closed
: Start of playback
: End of LD
: Intro Scan
: Highlight Scan
: Random playback
: Programmed playback
: 1-chapter (1-track) repeat
playback
: Double-side repeat playback
: Single-side repeat playback
: Program repeat playback
: Random repeat playback
: Switching power OFF
: LaserDisc
: Compact Disc
: Compact Disc with Video
: Disc not present
LAST MEMORY
button
P. 14
P. 17
P. 13
P. 17
P. 12
ENGLISH
11
POWER
OPEN/CLOSE
0
KEY CONTROL
Ii
AUDIO
D/A•CX
REPEAT
A-B
DISPLAY
PROGRAM
CHP/TIME
LAST
MEMORY
3C12
CLEAR
6 +1045
9078
w∑23
MULTI-SPEED STILL/STEP
4¢
RANDOM
HILITE
/INTRO CHAPTER/SKIP
31¡
PLAYSEARCH SEARCH
JOG
MODE
STOP PAUSESIDE
78
AB
JOG/SHUTTLE
REVERSE 2 3 FORWARD
s
L
NAMES OF PARTS
Remote Control Unit
P. 12
P. 12
P. 17
P. 22
P. 15
P. 24
POWER button
DISPLAY button
KEY CONTROL buttons
P. 16
Numeric buttons
AUDIO D/A
(Digital/Analog) button
PGM(Program) button
P. 21
P. 17
DISC SIDE A/B buttons
P. 15
CHP/TM(Chapter/Time)
button
P. 16
LAST MEMORY button
RANDOM button
P. 20
P. 20
HILITE/INTRO button
P. 19
JOG MODE button
P. 19
JOG MODE indicator
OPEN/CLOSE button
P. 12
P. 23
P. 23
CLEAR button
÷ Press to cancel repeat mode, program
mode or random playback or to correct a
mistake made with the numeric buttons.
REPEAT A-B buttons
REPEAT button
P. 19
P. 17
P. 19
P. 13
P. 13
MULTI-SPEED buttons
STILL/STEP buttons P. 18
CHAPTER/SKIP buttons
8: PAUSE button
7: STOP button
SHUTTLE ring
JOG dial
P. 17
P. 18
P. 12
3: PLAY button
¡: SEARCH (Fast forward)
button
P. 17
1: SEARCH (Fast reverse)
button
Operation of the remote control unit
Point the remote control unit toward the remote control sensor
on the front panel. The distance between the player and remote
control unit should be less than 7 meters (23feet) and the operat-
ing angle should be within 30 degrees to the left and right with
respect to the remote control sensor.
÷ To prevent a malfunction, avoid the entry of strong light, such
as direct sunlight and fluorescent light, into the remote control
sensor.
30°
30°
7 m
23 ft
.
s
12
BASIC OPERATION (PLAYBACK OF A DISC)
4
1
¢
¡
7
3
8
Ii
s
3
The buttons with the same name on the front panel and
remote control unit have the same functions.
The STANDBY indicator is lit while the power is OFF.
1. Press POWER.
Set the TV to the function (input) to which the player is
connected.
2. Press appropriate OPEN/CLOSE to open the
disc table.
Operations marked with [ ] are made from the remote
control unit.
Front Panel
To play a CD
To play an LD
Front Panel
Front Panel
4. Press 3.
Playback of the CDV starts with the video part.
Place only one disc, LD or CD, at a time.
3. Place a disc on the disc table.
To place an LD
To place a CD
s
After using a CD, the CD tray opens when you press OPEN/
CLOSE on the remote control unit. To playback an LD, use
OPEN/CLOSE on the front panel.
Front Panel
POWER
STANDBY
3
PLAY
3 PLAY
24
1
0
÷ For the connections, refer to pages 8 and 9.
Disc placing position
The CD/CDV or single-sided LD should be placed with the label
side facing up and the double-sided LD should be placed so that
the label of the side to be played faces up. Place any disc correctly
along the guide groove provided for each size.
Caution in placing a disc
Be careful not to deviate a disc from the guide groove on the
disc table, for this will make proper playback impossible and
could cause a malfunction such as disc damage.
For safety!
Be careful not to catch your finger in the disc table when it
draws in. Also take care to prevent a small child from opening
the disc table cover and inserting their hand inside the player to
prevent injury.
Do not place an object other than a disc on the disc table.
Convenient feature (Auto power-ON function)
When the power is OFF, pressing OPEN/CLOSE turns on the
power automatically and opens the disc table.
When you have turned the power OFF with a disc left inside
the player, simply press 3 on the front panel; the power turns
ON automatically and playback of the disc starts.
The above features cannot be operated with the remote control
unit.
Playback by specifying side A or B
In this description, side A refers to the surface facing up when the
disc is placed on the disc table, and side B refers to the other side.
Note that they are not always the same as disc sides A and B as
recorded on the disc.
It is recommended to place a disc so that the side labeled
"SIDE A" faces upward.
To play side A only: When the disc with the side labeled "SIDE
A" is facing up, press DISC SIDE A without pressing 3. The
player will stop after having played side A.
To play side B only; Press DISC SIDE B without pressing 3 . The
player will stop after having played side B.
If the disc has been placed with the recorded "SIDE B" facing up,
DISC SIDE A plays side B and DISC SIDE B plays side A.
Display when the disc side is switched
Turning from side A
to side B
Turning from side B to
side A
B
A
LD
CD single:8 cm (3 in.)
CD, CDV, video single:12 cm (5 in.)
LD, LD single:20 cm (8 in.)
LD:30 cm (12 in.)
LD disc table :
8
c
m
/
3
i
n
.
C
D
1
2
c
m
/
5
i
n
.
C
D
/
C
D
V
2
0
c
m
/
8
i
n
.
L
D
3
0
c
m
/
1
2
i
n
.
L
D
CD disc table :
CD
CD single:8 cm (3 in.)
CD, CDV, video single:12 cm (5 in.)
s
POWER
CDLD
ENGLISH
13
BASIC OPERATION (PLAYBACK OF A DISC)
8
4
1
¢
¡
7
3
8
Ii
s
2
1, 3 7
CDLD
CD
s
s
With LD
With CDWith LD
To stop playback and take out the disc
1. Press OPEN/CLOSE.
With CD
2. Take out the disc.
With CD
With LD
3. Press OPEN/CLOSE to close the disc table.
Front Panel Front Panel
Front PanelFront Panel
LD
0
0
To stop playback (7)
Press 7.
To pause playback temporarily (8)
Press 8. The audio and video disappear and the 8 indica-
tor lights on the display. Pressing 8 again resumes play-
back from the position where it was paused.
A still image is displayed during pause with a LD.
Leaving the player in pause mode for a long period of
time may shorten the life of the motor. Therefore,
the player automatically enters stop mode when pause
mode has lasted for about 20 minutes. (Pause timer)
7 STOP
7
STOP
PAUSE
8
8 PAUSE
Notes on playback of the LD single
When playing back a one-sided (20 cm) LD single, the player some-
times enters side B mode after playing back side A and then
enters stop mode. “U1, F5..., ” appears on the TV and the player’s
display but this occurs because there is no signal on side B, not
because of a malfunction.
14
MOVIE DISC ENTERTAINMENT
The on-screen display can be defeated to enhance the ambience
of movie entertainment. In addition, the Quick-Turn function reduc-
es the time required before starting playback or changing disc side
and the Bass Extension function which allows selection of the
audio response of each movie are also provided.
To turn off the display
Press DISPLAY OFF.
The indicator lights when the quick-turn function is on.
QUICK
TURN
To select the audio that matches the ambi-
ence of the movie (BASS EXTENSION)
Press repeatedly
Off : Original audio
Once LEVEL-1: Bass is enhanced
Twice LEVEL-2: Bass is enhanced more
than LEVEL-1
Three times LEVEL-3: Bass is enhanced more
than LEVEL-2
∞
∞
∞
∞
To reduce the playback start time and turn
time (QUICK-TURN)
NOTES:
÷
Turning on bass extension may distort the dialog portion of a
sound track when used with certain discs or system config-
urations. If this occurs, either turn down the bass extension
level or turn bass extension off.
÷
The bass extension is turned off automatically with a CD
inside the player. If an LD placed in it, the previous state is
recalled from the memory and the bass extension is turned
on again.
÷
The bass extension on or off state is held in memory even
after the power is switched off so the same state is recalled
when the power is switched on later.
÷
The bass extension function is switched off automatically
when the microphone is plugged in. The bass extension is
switched back on as soon as the microphone is unplugged.
÷
The bass extension function is switched off automatically
when One-Touch Karaoke is switched on. In this case, re-
turn to the bass extension does not occur.
The indicator lights.
DISPLAY
OFF
The indicator lights when the bass extension function is on.
÷ The display window as well as the on-screen display turns off.
However, when a button on the player or remote control unit is
pressed, the operation mode is displayed for about 1.5 seconds.
÷ The TV screen color while the disc is turned or stopped chang-
es from a blue background to a black background.
NOTE :
When DISPLAY OFF is pressed, the display window turns off
even while the power is ON. The display OFF state is held in
memory even after the power is switched off so the display
window is off when the power is switched on later. To turn on
the display window, press DISPLAY OFF again.
BASS
LEVEL-1
The level is displayed on the top right of the screen.
The bass sound is adjusted every time BASS EXTENSION is
pressed. Set the button to the desired position according to the
atmosphere of the movie you are watching.
÷ Press QUICK TURN to turn this function off.
÷ When the quick-turn is on, the TOC recorded on the disc is not
read so the time required before starting playback or turning
the disc can be reduced.
As a result, even when the LD being played contains TOC
information, the random playback, total time display, remain-
ing time display and the elapsed time display of CAV (stan-
dard play) disc will not function.
NOTES :
÷
When the AC cord is plugged into a power outlet and the
power of the player is switched on, the quick-turn is auto-
matically turned on and the indicator lights.
÷
The quick-turn is turned off automatically when a CD is in-
side the player. If an LD is placed in it, the previous state is
recalled from the memory and the quick-turn is turned on
again.
÷
The quick-turn on or off state is held in memory even after
the power is switched off so the same state is recalled
when the power is switched on later.
BASS
EXTENSION
ENGLISH
15
SINGING ALONG WITH KARAOKE ENTERTAINMENT
2
A
B
4
1
3
B
B:To set a desired pitch (Key control function)
I
i
KEY CONTROL
KEY CONTROL
iI
# : Pitch is heightened each time this button is pressed (up to 5
steps from normal).
I : Pitch is lowered each time this button is pressed (up to 5
steps below normal).
The current pitch position is shown by the lit indicator.
The key control is possible only while a microphone is
plugged in.
The karaoke audio varies as shown below according to the type of
disc.
Multiplexed
audio disc
The volume of the singer's voice (vocal)
is reduced.
The karaoke music recorded in the L
(Left) channel is played. (This is mon-
aural audio.)
When an ordinary stereo disc is played,
the singer's voice (vocal) is reduced.
Digital multi-
plexed audio disc
The karaoke music is played in stereo.
(However, if the analog audio is
selected with AUDIO D/A•CX, the
effect becomes the same as the
multiplexed audio disc described
above.)
LD
Digital audio :
Stereo
Analog audio :
Multiplexed
CD , CDV
NOTES :
In case the audio is distorted, set the ATTENUATOR switch
on the rear panel to ON.
In case playback is started with
3
, the player does not
pause after having played the music.
If you do not want the player to pause, press and hold
7
on
the front panel for more than 2 seconds until the KARAOKE
indicator turns off.
The pause after playback also occurs after programmed play-
back and random playback . If you do not want
the player to pause after programmed or random playback,
press and hold
3
for more than 2 seconds during pro-
grammed or random playback.
During the operation of the ONE TOUCH KARAOKE func-
tion, it is not possible to switch the L (Left) and R (Right)
channels with AUDIO D/A•CX.
The voice(s) of the singer(s) may not be reduced with cer-
tain discs, even if you press ONE TOUCH KARAOKE.
P. 22
P. 20
P. 8
A:To mute the voice(s) of the singer(s) from a disc :
Press ONE TOUCH KARAOKE.
The ONE TOUCH KARAOKE indicator will
light on the display.
Stereo audio disc :
The voice(s) of the singer(s) is lare reduced so
that you can practice karaoke singing.
Multiplexed audio disc :
Karaoke play starts.
2. Select music with the numeric buttons on the
remote control unit.
1. Insert the microphone plug(s) into the MIC
jack(s).
The KARAOKE indicator lights on the display.
3. Adjust the microphone volume with the MIC
LEVEL control(s). Also adjust the listening level
of the TV set.
4. Adjust the echo with the ECHO control.
Now start singing!
When the selected music has been played, the player enters
pause mode. To continue karaoke singing, select another
song with the numeric buttons.
ECHO
To select No. 10 or beyond:
Use the +10 and 0 buttons.
(Examples) 17: +10 , 7
20: +10 , +10 , 0
0 10
0 10 0 10
MIC
12
Stereo audio disc
21
MIC
LEVEL
ONE TOUCH
KARAOKE
16
APPLIED OPERATIONS
3
2
33
22
Digital audio
R CH
Digital audio
L CH
Analog audio
R CH
Digital audio
(stereo)
Analog audio
(stereo)
Analog audio
L CH
LD with ° mark
° functions on the analog audio of LD.
With an LD carrying the ° mark, audio can be played with re-
duced noise using the CX noise reduction system.
Some of the discs carrying the ° mark do not contain the codes
for automatic ON/OFF switching of the CX system. With such
discs, turn CX ON by pressing AUDIO D/A•CX on the remote
control unit.
÷ ° is a trademark of CBS. This player conforms to the extended
specifications of CX.
Position slightly before
Position where playback
was stopped
Press LAST MEMORY once. Playback starts from the position
slightly before the position where it was last stopped.
To start playback after reviewing the plot from the beginning
to the position where it was last stopped:
Start
Short playback
and fast forward
are repeated.
Press LAST MEMORY consecutively twice. A short period of play-
back and fast forward operations are repeated from the beginning
of the disc until slightly before the position where playback was
last stopped, and normal playback starts from there. By pressing
LAST MEMORY again during the fast forward operation, playback
can be started directly from slightly before the position where it
was last stopped.
Every time AUDIO D/A•CX is pressed during playback, the played
audio is switched. This makes it possible to;
÷ listen to the analog audio of a disc with digital audio;
÷ listen to only one of the two channels of a stereo disc;
÷ select the audio to be played from multiplexed audio disc.
Audio switching
LD
LD with digital audio
It is possible to switch between the digital and analog audio and
between the L (Left) and R (Right) channels of stereo audio.
LAST
MEMORY
LAST
MEMORY
To play an LD from the position where
playback was last stopped
If 7 or POWER is pressed during playback, and playback has not
reached the middle of the disc, it is possible to restart playback
from the position where it was stopped.
When playback of an LD is stopped by pressing 7 or POWER, the
address where the playback is stopped is stored in memory and,
provided that the disc is left in the LD disc table, the stored ad-
dress is held in memory even after the power is switched off.
When you switch the power on and press LAST MEMORY, play-
back starts from the position where it was last stopped.
LD with analog audio
÷ Disc containing CX auto ON (OFF) switching codes
33
Stereo audio L CH R CH
3
÷ Disc without CX auto ON (OFF) switching codes
3
CX OFF
(stereo)
CX OFF
(R CH)
CX ON
(stereo)
CX ON
(R CH)
CX ON
(L CH)
CX OFF
(L CH)
3
3
2
22
and
CDV
CD
33
Stereo audio L CH R CH
3
÷ In a case of a disc recorded with Dolby AC-3 signal, only
the left channel signal is heard in monaural mode when an
analog audio is selected.
To start playback directly from the position where it was
stopped:
NOTES :
÷
The last memory playback function is available only with
LDs. It is not available with CD and CDV discs.
÷
If playback was last stopped in the middle of side B of a
double-sided disc, the last-memory playback starts from side
B.
÷
When
3
is pressed to start playback after it has been
stopped with
7
, playback starts from the beginning of the
disc.
÷
Be sure to leave the disc inside the player. Last-memory
playback is not possible once the disc has been taken out
of the player.
÷
Be sure to plug the AC power cord into a power outlet to
which power is supplied permanently.
LAST
MEMORY
AUDIO
D/A•CX
AUDIO
D/A•CX
AUDIO
D/A•CX
AUDIO
D/A•CX
AUDIO
D/A•CX
ENGLISH
17
<Normal search>
It is also possible to specify a chapter or track number with CHP/
TIME as shown below.
(Examples)
To stop search in the middle:
Press CLEAR during search.
NOTE :
Some discs do not contain the chapter numbers. Direct search and
normal search are not available with these discs.
APPLIED OPERATIONS
3
PLAY
Searching the beginning of a chapter/track
Searching the desired scene directly
Specify the chapter number or track number.
Example: Playing an LD from the beginning of chapter No. 3
<Direct search>
Press numeric button "3".
To select chapter No. 10 or beyond:
Use the +10 and 0 buttons.
(Examples)
17 : +10 , 7
30 : +10 , +10 , +10 , 0
Scan (Manual Search)--Search using fast
forward or fast reverse
SEARCH
SEARCH
When a disc is scanned until the beginning:
Normal playback will start.
When a disc is scanned until the end:
With an LD, the player will pause at the end of the disc.
With the video part of a CDV, the audio part will be searched.
During fast forward or fast reverse, the audio is:
Not heard.
NOTES:
Note on CAV (standard play disc):
During scanning, noise may appear on the screen. This is not a
malfunction.
Note on CLV (extended play disc):
The scan speed is different between inner chapters and
outer chapters depending on the positions they are recorded
on the disc.
or
P. 19
To skip to the beginning of a chapter/track,
¢ : Press to advance to the next chapter or track.
4 : Press to return to the beginning of the chapter or track being
played.
Press repeatedly to move further to other chapters/tracks.
Press and hold ¡ or 1 during playback to start a slow scan of
the image. The scan speed increases to high speed if the button is
held depressed for more than 4 seconds after starting the scan.
However, the high speed scan does not function during playback
of a CDV (video part).
Rotate the SHUTTLE ring on the remote control unit clockwise
during playback to fast forward the video. Rotating the ring coun-
terclockwise fast-reverses the video. Normal-speed playback re-
sumes when the ring is released.
The speed varies depending on the angle the SHUTTLE ring is
rotated. From slow speed in the beginning to higher speeds
when the ring is rotated further, the speed varies in 4 steps.
SEARCH
1
SHUTTLE ring
SEARCH
¡
CHAPTER/SKIP
¢
4
CHP/TIME
3
Front Panel
¡
1
CHAPTER/SKIP
¢4
Front Panel
1 ,
3 ,
0 ,
CHP/TIME
CHP/TIME
3
PLAY
3
PLAY
,
,
,,
7 ,
17 :
30 :
CHP/TIME
CHP/TIME
18
APPLIED OPERATIONS
\
|
e
E
A still image can also be displayed with 8 .
Displaying image frame by frame – Frame advance
While a still image is displayed, press either w or ∑.
Press and hold for continuous frame advance.
Each press forwards
one frame.
Each press reverses
one frame.
w
∑
3
Display
1/8
1/2
x2
1/2
1/8
1/30
3
2
MULTI-SPEED
For reverse
playback
For forward
playback
The first press of either MULTI SPEED 2 or 3 changes the play-
back speed to 1/8 the normal speed. Further pressing of the same
button changes the playback speed as shown below.
NOTES :
Press
3
to return to normal playback.
The audio is not heard during still image, frame advance and
multi-speed playback.
In case a still image appears automatically during playback:
Some discs contain special recorded signals called picture stop
codes. When playing such a disc, you can continue playback with-
out displaying still images on the positions where picture stop
codes are recorded by pressing and holding 3 on the front panel
for more than 2 seconds to activate the picture stop cancel func-
tion. On-screen display "PSC ON" is displayed for a few seconds
when this function is activated. To cancel this function, press and
hold 3 for more than 2 seconds until "PSC OFF" is displayed on
the screen for a few seconds.
Still image/frame advance
(LD and CDV video parts only)
Freezing an image – Still image
Press either w or ∑ to display a still image.
Multi-speed playback by varying the play-
back speed and direction (LD and CDV video
parts only)
Speed
1/8 the normal speed
Half the normal speed
Twice the normal speed
Half the normal speed
1/8 the normal speed
1/30 the normal speed
w
∑
STILL/STEP
3
2
MULTI-SPEED
STILL/STEP
STILL/STEP
ENGLISH
19
APPLIED OPERATIONS
Use the SHUTTLE ring and JOG dial.
JOG
MODE
Press JOG MODE. The JOG MODE indicator
lights. Frame advance, 1/2-speed, normal-
speed and x2-speed playback in both forward
and reverse directions are possible according
to the direction and angle in which the JOG
dial is rotated.
x2-speed
reverse
play
x1-speed
reverse
play
1/2-speed
reverse
play
Plays video
in reverse
direction.
Plays video
in forward
direction.
1/2-speed
play
x1-speed
play
x2-speed
play
Even
faster
Faster
Fast
rotation
Normal play
Slow
clockwise
rotation
Fast rotation
Faster
Even faster
Slow
counter-
clockwise
rotation
SHUTTLE ring:
x2-speed, x5-speed, x10-speed and fast forward/reverse (scan)
in both forward and reverse directions are possible according
to the direction and angle in which the SHUTTLE ring is rotated.
Stop rotation for
still-image play.
x10-speed
reverse
play
x5-speed
reverse
play
x2-speed
reverse
play
x2-speed
play
x5-speed
play
x10-speed
play
Fast
forward
Even more
rotation
More
rotation
Slightly
more
rotation
Normal play
Clockwise
rotation
Slight
more
rotation
More
rotation
Even more
rotation
Remove hand
for normal play.
Audio is not output during special playback using the JOG dial or
SHUTTLE ring. (Audio is not output even at normal speed.)
With special playback of the video part of a CDV using the
SHUTTLE ring:
Up to x10-speed playback is possible. Fast forwarding or fast re-
versing at a with higher speed are not possible.
To return to normal playback after JOG dial operation:
Press 3.
Set JOG MODE on the remote control unit to off when the
JOG dial is not used:
JOG MODE turns off automatically in about 5 minutes after the
JOG dial is last operated (JOG MODE indicator also goes off).
However, to save the batteries in the remote control unit, it is
recommended to press JOG MODE to off after completing JOG
dial operation.
When a disc has been scanned until the end:
A still image is displayed.
When the video part of a CDV has been scanned until the end, its
audio part starts to be searched.
JOG dial
SHUTTLE ring
Searching a scene using special play-
back which can vary the playback speed
and direction with one-touch operation
(LD and CDV video parts only)
JOG MODE
indicator
JOG MODE
button
JOG dial
SHUTTLE ring
Fast
reverse
Counter-
clockwise
rotation
20
QUICK SCANNING OF DISC
CONTENTS
RANDOM PLAYBACK
(PLAYBACK IN ORDER
SELECTED BY THE PLAYER)
Intro Scan (Available on LD and CDV video
parts)
When the button is pressed in stop mode:
Highlight Scan starts, with which on 8-second section starting 1
minute after the beginning of every track, will be played in order.
When the button is pressed during playback:
Assuming that the time elapsed from the beginning of the track
being played until the position where the button is pressed is
called the Highlight Scan starting period, the 8-second section will
be played after this starting period, on every track beginning with
track No.1.
NOTES :
÷
With a CDV, the operation begins with Intro Scan of the
video part and continues to Highlight Scan of the audio part.
÷
Intro Scan is not available with discs which do not contain
recorded chapter numbers.
÷
When a track is shorter than 1 minute or than the set start-
ing period, Highlight Scan of that track starts at the begin-
ning and lasts for 8 seconds. If a track is shorter than 8
seconds, it will be played entirely from the beginning.
Highlight Scan (Available on CD and CDV
audio parts)
When the button is pressed during playback or in stop mode:
The first 8 seconds of every chapter will be played in order. When
3 is pressed, normal playback starts from that position.
When the disc has been scanned until the last chapter, normal
playback starts from chapter No. 1.
HILITE
/INTRO
HILITE
/INTRO
Random playback (CD, CDV and LD with
TOC only)
NOTES :
÷
Chapter 0 is not included in random playback.
÷
Random playback of programmed chapters/tracks is not pos-
sible.
÷
Random playback is not possible with an LD without a
TOC.
÷
While the quick-turn is on, random playback is not pos-
sible even with an LD containing a TOC.
In this case, stop playback and turn off the quick-turn
function before starting random playback.
RANDOM
P. 7
P. 14
Press RANDOM.
With an LD, first press QUICK TURN to turn the quick-turn off,
then press 3 and finally press RANDOM.
All chapters/tracks in the disc are played in a random order select-
ed by the player. Random playback stops after all of the chapters/
tracks on the disc have been played.
During random playback:
÷ Pressing ¢ plays the next selected track.
÷ Pressing 4 replays the track being played from the beginning.
÷ Pressing CLEAR cancels random playback and starts normal
playback.
÷ Pressing RANDOM again restarts random playback with a new-
ly selected order of tracks.
To stop random playback:
Press 7.
HILITE
/INTRO
RANDOM
Sivu latautuu ...
Sivu latautuu ...
Sivu latautuu ...
Sivu latautuu ...
Sivu latautuu ...
Sivu latautuu ...
Sivu latautuu ...
Sivu latautuu ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
muilla kielillä
- polski: Yamaha CDV-W901 Instrukcja obsługi
- Türkçe: Yamaha CDV-W901 El kitabı
- English: Yamaha CDV-W901 Owner's manual
- čeština: Yamaha CDV-W901 Návod k obsluze
- svenska: Yamaha CDV-W901 Bruksanvisning
- русский: Yamaha CDV-W901 Инструкция по применению
- italiano: Yamaha CDV-W901 Manuale del proprietario
- Deutsch: Yamaha CDV-W901 Bedienungsanleitung
- português: Yamaha CDV-W901 Manual do proprietário
- dansk: Yamaha CDV-W901 Brugervejledning
- français: Yamaha CDV-W901 Le manuel du propriétaire
- español: Yamaha CDV-W901 El manual del propietario
- Nederlands: Yamaha CDV-W901 de handleiding
- română: Yamaha CDV-W901 Manualul proprietarului
Liittyvät paperit
-
Yamaha CDV-1100RS Omistajan opas
-
-
-
-
-
-
-
-
-