KitchenAid KICO 3T133 PFES Käyttöohjeet

Instruction for use

2

3

Installation ...............................................................................................................................................................................................4

Product description ..............................................................................................................................................................................5

First time use ........................................................................................................................................................................................... 6

Programs table .......................................................................................................................................................................................8

Options and functions .........................................................................................................................................................................9

Loading the racks ............................................................................................................................................................................... 10

Daily use ................................................................................................................................................................................................ 11

Advice and tips .................................................................................................................................................................................... 11

Care and maintenance ..................................................................................................................................................................... 12

Troubleshooting ................................................................................................................................................................................. 13

After-sales service .............................................................................................................................................................................. 14

4

Installation

CONNECTING THE WATER SUPPLY

Adaptation of the water supply for installation should only be perfor-

med by a qualied technician.

The water inlet and outlet hoses may be positioned towards the right

or the left in order to achieve the best possible installation.

Make sure the dishwasher does not bend or squash the hoses.

CONNECTING THE WATER INLET HOSE

• Run the water until it is perfectly clear.

• Screw the inlet hose tightly into position and turn on the tap.

If the inlet hose is not long enough, contact a specialist store or an

authorised technician.

The water pressure must be within the values indicated in the Techni-

cal Data table - otherwise the dishwasher may be function properly.

Make sure the hose is not bent or compressed.

SPECIFICATIONS FOR THE CONNECTION OF THE WATER SUPPLY HOSE:

CONNECTING THE WATER OUTLET HOSE

Connect the outlet hose to a drain duct with a minimum diameter of

2 cm A.

The outlet hose connection must be at a height ranging from 40 to

80 cm from the oor or surface where the dishwasher rests.

Before connecting the water outlet hose to the sink drain, remove the

plastic plug B.

ANTI-FLOODING PROTECTION

Anti-ooding protection. To ensure oods do not occur, the dishwasher:

- is provided with a special system which blocks the water supply

in the event of anomalies or leaks from inside the appliance.

Some models are also equipped with the supplementary safety devi-

ce New Aqua Stop, which guarantees anti-ooding protection even

in the event of a supply hose rupture.

Under no circumstances should the water inlet hose be cut as it conta-

ins live electrical parts.

WATER SUPPLY cold or hot (max. 60°C)

WATER INTAKE 3/4”

POWER OF WATER PRESSURE

0,05 ÷ 1 MPa (0.5 ÷ 10 bar)

7,25 – 145 psi

MIN 40 cm

MAX 80 cm

ATTENTION: If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back.

Before using the appliance carefully read the Safety Instruction.

ELECTRICAL CONNECTION

WARNING: Under no circumstances should the water inlet hose

be cut as it contains live electrical parts.

Before inserting the plug into the electrical socket, make sure that:

• The socket is earth and complies with current regulations;

• The socket can withstand the maximum load of the appliance

as shown on the data plate located on the inside of the door (see

PRODUCT DESCRIPTION).

• The power supply voltage falls within the values indicated

on the data plate on the inside of the door.

• The socket is compatible with the plug of the appliance.

If this is not the case, ask an authorised technician to replace the plug

(see AFTER-SALES SERVICE). Do not use extension cables or multiple

sockets. Once the appliance has been installed, the power supply

cable and the electrical socket should be easily accessible.

The cable should not be bent or compressed.

If the power supply cable is damaged, have it replaced by the ma-

nufacturer or its authorised Technical Assistance Service in order

to prevent all potential hazards.

The Company shall not be held responsible for any incidents, if these

regulations are not observed.

POSITIONING AND LEVELLING

1. Position the dishwasher on a level sturdy oor. If the oor is uneven,

the front feet of the appliance may be adjusted until it reaches

a horizontal position. If the appliance is levelled correctly, it will

be more stable and much less likely to move or cause vibrations

and noise while it is operating.

2. Before recessing the dishwasher, stick the adhesive transparent

strip under the wooden shelf in order to protect it from any conden-

sation which may form.

3. Place the dishwasher so that its sides or back panel are in contact

with the adjacent cabinets or the wall. This appliance can also be re-

cessed under a single worktop.

4. To adjust the height of the rear foot, turn the red hexagonal

bushing on the lower central part at the front of the dishwa-

sher using a hexagonal spanner with an opening of 8 mm. Turn

the spanner in

a clockwise direction to increase the height and in an anticlockwise

direction to decrease it.

DIMENSIONS AND CAPACITY:

WIDTH 598 mm

HEIGHT 820 mm

DEPTH 555 mm

CAPACITY 14 standard place-settings

5

Product description

APPLIANCE

CONTROL PANEL

1 2 3

4

5 6 7

8 9 10 11 12 13

1. ON-OFF/Reset button with indicator light

2. Program selection button

3. Salt rell indicator light

4. Rinse Aid rell indicator light

5. Program number and delay time indicator

6. Tablet indicator light

7. Display

8. Multizone indicator lights

9. Multizone button

10. Delay button

11. Boost button with indicator light

12. Dynamic Clean button with indicator light

13. START/Pause button with indicator light / Tab

0000 000 00000

Service:

1

4

5

6

11

13

7

12

10

8

9

2

3

1. Upper rack

2. Cutlery rack

3. Foldable aps

4. Upper rack height adjuster

5. Upper spray arm

6. Lower rack

7. Dynamic Clean support

8. Lower spray arm

9. Filter Assembly

10. Salt reservoir

11. Detergent and Rinse Aid dispensers

12. Rating plate

13. Control panel

6

First time use

ADVICE REGARDING THE FIRST TIME USE

After installation, remove the stoppers from the racks and the retaining

elastic elements from the upper rack.

WATER SOFTENER SETTINGS

Before starting the rst wash program, set the hardness level

of the water from the mains supply FILLING THE SALT RESERVOIR.

First load the softener tank with water, then introduce about 1 kg

of salt. It is perfectly normal for water to ow out.

As soon as this procedure is complete, run a program without loading.

The “Pre-wash” program alone is NOT sucient.

Residual saline solution or grains of salt can lead to deep-down

corrosion, irreparably damaging the stainless steel components.

The guarantee is not applicable if faults are caused by such circumstances.

Only use salt that has been specically designed for dishwashers.

After the salt has been poured into the machine, the SALT REFILL

indicator light switches o.

If the salt container is not lled, the water softener and the heating

element may be damaged as a result of limescale accumulation.

Using of Salt is recommended with any type of dishwasher

detergent.

WATER SOFTENING SYSTEM

Water softener automatically reduces water hardness, consequently

preventing scale buildup on heater, contributing also to better cleaning

eciency.

This system regenerates itself with salt, therefore it is required

to rell salt container when empty.

Frequency of regeneration depends on water hardness level setting -

regeneration takes place once per 6 Eco cycles with water hardness

level set to 3.

Regeneration process starts in nal rinse and nishes in drying phase,

before cycle ends.

• Single regeneration consumes: ~3.5L of water;

• Takes up to 5 additional minutes for the cycle;

• Consumes below 0.005kWh of energy.

REFINED SALT AND RINSE AID

If you are using a multi-function product, we recommend that you

add salt in any case, especially if the water is hard or very hard

(follow the instructions given on the packaging).

If you do not add salt or rinse aid, the SALT REFILL and RINSE AID

REFILL indicator lights will remain lit.

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the dishes

and on the machine’s functional components.

• It is mandatory that THE SALT RESERVOIR NEVER BE EMPTY.

• It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher

(see PRODUCT DESCRIPTION) and must be lled when the SALT REFILL

indicator light in the control panel is lit.

1. Remove the lower rack and unscrew the

reservoir cap (anticlockwise).

2. Only the rst time you do this: ll the salt

reservoir with water.

3. Position the funnel (see gure) and ll the salt

reservoir right up to its edge (approximately

1 kg); it is not unusual for a little water to leak

out.

4. Remove the funnel and wipe any salt residue

away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can

get into the container during the wash program (this could damage

the water softener beyond repair).

Whenever you need to add salt, it is mandatory to complete

the procedure before the beginning of the washing cycle to avoid

corrosion.

SETTING THE WATER HARDNESS

To allow the water softener to work in a perfect way, it is essential

that the water hardness setting is based on the actual water hardness

in your house. This information can be obtained from your local water

supplier.

The factory sets the default value for the water hardness.

• Switch on the appliance by pressing the ON/OFF button.

• Switch o the appliance by pressing the ON/OFF button.

• Hold down button P for 5 seconds, until you hear a beep.

• Switch on the appliance by pressing the ON/OFF button.

• The current selection level number and the salt indicator light both ash.

• Press button P to select the desired hardness level (see WATER

HARDNESS TABLE).

• Switch o the appliance by pressing the ON/OFF button.

Setting is complete!

Water Hardness Table

Level

°dH

German degrees

°fH

French degrees

°Clark

English degrees

1 Soft 0 - 6 0 - 10 0 - 7

2 Medium 7 - 11 11 - 20 8 - 14

3 Average 12 - 16 21 - 29 15 - 20

4 Hard 17 - 34 30 - 60 21 - 42

5 Very hard 35 - 50 61 - 90 43 - 62

7

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse aid dispenser A should

be lled when the RINSE AID REFILL indicator light in the control

panel is lit.

1. Open the dispenser B by pressing and pulling up the tab on the lid.

2. Pour in the rinse aid (max.110 ml), making sure it does not overow

from the dispenser. If this happens, clean the spill immediately with

a dry cloth.

3. Press the lid down until you hear a click to close it.

NEVER pour the rinse aid directly into the appliance tub.

ADJUSTING THE DOSAGE OF RINSE AID

If you are not completely satised with the drying results, you can

adjust the quantity of rinse aid used.

• Switch the dishwasher on using the ON/OFF button.

• Switch it o using the ON/OFF button.

• Press button P three times - a beep will be heard.

• Switch it on using the ON/OFF button.

• The current selection level number and rinse aid indicator light ash.

• Press button P to select the level of rinse aid quantity to be supplied.

• Switch it o using the ON/OFF button

Setting is complete!

If the rinse aid level is set to ZERO (ECO), no rinse aid will be supplied.

The LOW RINSE AID indicator light will not be lit if you run out of rinse aid.

A maximum of 5 levels can be set according to the dishwasher model.

The factory setting is specic to the model, please follow instruction

above to check this for your machine.

• If you see bluish streaks on the dishes, set a low number (1-2).

• If there are drops of water or limescale marks on the dishes, set

a mid-range number (3-4).

A

B

FILLING THE DETERGENT DISPENSER

Only use detergent which has been specically designed

for dishwashers.

DO NOT USE washing up liquid.

Using excessive detergent may result in foam residues remaining

in the machine after the cycle has ended.

Usage of detergent not designed for dishwashers may cause

malfunction or damage to the appliance.

To achieve the best washing and drying results, the combined use

of detergent, rinse aid liquid and rened salt is required.

We recommend using detergents that do not contain phosphates

or chlorine, as these products are harmful to the environment.

Good washing results also depend on the correct amount

of detergent

being used.

Exceeding the stated amount does not result in a more eective

wash and increases environmental pollution.

The amount can be adjusted to the soil level. In the case of normally

soiled items, use approximately either 35g (powder detergent)

or 35ml (liquid detergent) and additional tea spoon of detergent

directly inside the tub. If tablets are used, one tablet will be enough.

If the crockery is only lightly soiled or if it has been rinsed with

water before being placed in the dishwasher, reduce the amount

of detergent used accordingly (minimum 25 g/ml) e.g. skip

the powder/gel putted inside the tub.

For good washing results also follow the instructions shown

on the detergent box.

For further questions please ask the detergent producers.

To open the detergent dispenser use the opening device C.

Introduce the detergent into the dry dispenser D only. Place

the amount of detergent for pre-washing directly inside the tub.

1. When measuring out the detergent

refer to the mentioned earlier

information to add the proper

quantity. Inside the dispenser

D there are indications to help

the detergent dosing.

2. Remove detergent residues

from the edges of the dispenser

and close the cover until it clicks.

3. Close the lid of the detergent

dispenser by pulling it up until

the closing device is secured

in place.

The detergent dispenser automatically opens up at the right time

according to the program.

If all-in-one detergents are used, we recommend using the TABLET

button, because it adjusts the program so that the best washing

and drying results are always achieved.

C

D

8

Programs table

PROGRAMS DESCRIPTION

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.

Pre-treatment of the dishes is not needed before any of the programs.

*) Not all options can be used simultaneously.

**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature

and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options

and sensor calibration. The sensor calibration can increase program duration up to 20 min.

Instructions on wash cycle selection.

1 ECO

Eco programme is suitable to clean normally soiled tableware, that

for this use, it is the most ecient programme in terms of its combined

energy and water consumption, and that it is used to assess complian-

ce with the EU Ecodesign legislation.

2 DYNAMIC SENSOR

For normally soiled dishes with dried food residues. Senses the level of

soiling on the dishes and adjusts the program accordingly. When the

sensor is detecting the soil level an animation appears in the display

and the cycle duration is updated.

3 PROFESSIONAL

Program recommended for heavily soiled crockery, especially suitable

for pans and saucepans (not to be used for delicate items).

4 FAST WASH&DRY

Normally soiled crockery. Everyday cycle, that ensures optimal cleaning

performance in shorter time.

5 GLASS

Program for delicate items, which are more sensitive to high temperatu-

res, for example glasses and cups.

6 FAST 30’

Program to be used for half load of lightly-soiled dishes with no dried

food residues. Does not have drying phase.

7 DYNAMIC HYGIENE

Normally or heavily soiled crockery, with additional antibacterial wash.

Can be used to perform maintenance of the dishwasher.

8 PRE-WASH

Use to refresh crockery planned to be washed later. No detergent

to be used with this program.

Notes:

Please note that cycle Fast 30’ is dedicated for lightly soiled dishes.

Program

Drying

phase

Auto Door

Opening

Available

options

*)

Duration

of wash

program

(h:min)

**)

Water

consumption

(litres/cycle)

Energy

consumption

(kWh/cycle)

1. Eco 50°

3:10 9,5 0,85

2. Dynamic Sensor

50-60°

1:25 - 3:00 7,0 - 14,0 0,90 - 1,40

3. Professional

65° -

2:27 16,5 1,70

4. Fast Wash&Dry 50°

1:25 11,5 1,10

5. Glass

45°

2:05 11,5 1,20

6. Fast 30’ 50°

-

0:30 9,0 0,50

7. Dynamic

Hygiene

65° -

1:40 10,0 1,30

8. Pre-Wash

- -

-

0:12 4,5 0,01

9

Options and functions

OPERATION INDICATOR

A LED light projected on the oor indicates that the dishwasher is

working. One of the following operating modes can be selected:

a) Disabled function.

b) When the cycle starts the light goes on for few seconds,

stays o during the cycle and ashes at the end of the cycle.

c) The light stays on during the cycle and ashes at the end

of the cycle (default mode).

If the delayed start was set, the light goes on either for the rst

few seconds or the entire duration of the countdown, based

on whether mode b) or c) was set.

The light goes o every time the door is opened. To select

the mode you prefer, switch on the machine, hold down

button P until one of the three letters appears on the display,

press button P until you reach the desired letter (or mode),

hold down button P to conrm the selection.

Note: If Auto Door Opening is active and it opens the door,

then Operation Indicator will not ash at the end of cycle.

MULTIZONE

If there are not many dishes to be washed, a half loading may

be used in order to save water, electricity and detergent.

Select the program and then press the MULTIZONE button:

the symbol of the chosen rack will appear on the display.

By default the appliance washes dishes in all racks.

To wash only the specic rack, press this button repeatedly:

shown on the display (only lower rack)

shown on the display (only upper rack)

shown on the display (only cutlery rack)

shown on the display (option is OFF and the appliance will

wash dishes in all racks).

Remember to load the upper or lower rack only,

and to reduce the amount of detergent accordingly.

If upper rack is removed, please apply detergent directly

to tub instead of detergent dispenser.

Auto Door Opening

Auto Door Opening is a convection drying system which automatically

opens the door during/after drying phase to ensure exceptional

drying performance every day. Door opens at the temperature that

is safe to your kitchen furniture, thus door will not be opened when

the option of BOOST is on.

As additional steam protection, special designed protection foil is added

together with the dishwasher. To see how to mount protection foil

please refer to (INSTALLATION GUIDE).

Auto Door Opening functionality could be disabled by the user

as follows:

1. Go to the Dishwasher software menu pressing and holding P

button (6 sec).

2. You are currently in Light Control Menu (please refer to OPERATION

INDICATOR description), if you don’t want to change anything

please press and hold P button (

until one of the two letters appears

on the display).

3. You switched to Auto Door Opening Control Menu, you could

change status of Auto Door Opening functionality by pressing P

button:

E – enabled d – disabled

To conrm the change and exit from the Control Menu please press

and hold P button (3 sec).

TABLET (Tab)

This setting allows you to optimize the performance

of the program according to the type of detergent used.

Press the START/PAUSE button for 3 seconds

(the corresponding symbol will light up) if you use

combined detergents in tablet form (rinse aid, salt

and detergent in 1 dose).

If you use powder or liquid detergent, this option should

be o.

DYNAMIC CLEAN

Thanks to the additional power jets this option provides

a more intensive and powerful wash in the lower rack,

in the specic area. This option is recommended for washing

pots and casseroles. Press this button to activate DYNAMIC

CLEAN (the indicator lights up).

BOOST

The boost option delivers a cut 25%-67% of the duration

for main cycles, while ensuring an optimal level of washing

and drying. In order to do that it will require water and energy

consumption compared to the regular full-lenght cycle.

The option can be selected on programs: Eco 50°, Dynamic

Sensor 50-60°, Glass 45°.

DELAY

The start time of the program may be delayed for a period

of time between 1 and 12 hours.

1. Press the DELAY button: the corresponding «h» symbol

appears on the display; each time you press the button,

the time (1h, 2h, etc. up to max. 12h) from the start

of the selected wash cycle will be increased.

2. Select the wash program, press the START/PAUSE button

and within 4 seconds close the door: the timer will begin

counting down.

3. Once this time has elapsed, the indicator light «h» switches

o and the wash cycle begins.

To adjust the delay time and select a shorter period of time,

press the DELAY button. To cancel it, press the button

repeatedly until the selected delayed start indicator light «h»

switches o.

The DELAY function cannot be set once a wash cycle has

been started.

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).

If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED ashes rapidly 3 times

and beeps will sound. The option will not be enabled.

10

Loading the racks

UPPER RACK

Load delicate and light dishes:

glasses, cups, saucers, low salad

bowls.

The upper rack has tip-up supports

which can be used in a vertical

position when arranging tea/

dessert saucers or in a lower position

to load bowls and food containers.

(loading example for the upper rack)

FOLDABLE FLAPS WITH ADJUSTABLE POSITION

The side foldable aps can be fold

or unfold to optimize the arrangement

of crockery inside the rack. Wine glasses

can be placed safely in the foldable

aps by inserting the stem of each glass

into the corresponding slots.

Depending on the model:

– to unfold the aps there is needed

to slide it up and rotate or release

it from the snaps and pull it down.

– to fold the aps there is needed

to rotate it and slide aps down or pull

it up and attach aps to the snaps.

ADJUSTING THE HEIGHT OF THE UPPER RACK

The height of the upper rack can

be adjusted: high position to place bulky

crockery in the lower basket and low

position to make the most of the tip-up

supports by creating more space upwards

and avoid collision with the items loaded

into lower rack.

The upper rack is equipped with a Upper

Rack height adjuster (see gure), without

pressing the levers, lift it up by simply

holding the rack sides, as soon as the rack

is stable in its upper position. To restore

to the lower position, press the levers A at the sides of the rack

and move the basket downwards.

We strongly recommend that you do not adjust the height

of the rack when it is loaded.

NEVER raise or lower the basket on one side only.

LOWER RACK

For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids

should ideally be placed at the sides to avoid interferences with

the spray arm.

The lower rack has tip-up supports which can be used in a vertical

position when arranging plates or in a horizontal position (lower)

to load pans and salad bowls easily.

(loading example for the lower rack)

DYNAMIC CLEAN IN LOWER RACK

Dynamic Clean uses the special water

jets in the rear of cavity to wash more

intensively the high dirty items.

The lower rack has a Dynamic Clean,

a special pull-out support in the rear

of the rack that can be used to support

frying pans or baking pans in upright position, thus taking up less space.

Placing the pots/casseroles faced to the Dynamic Clean® component

please activate the DYNAMIC CLEAN on the panel.

How to use Dynamic Clean:

1. Adjust the Dynamic Clean area

(G) folding down the rear plate

holders to load pots.

2. Load pots and casseroles inclined

vertically in Dynamic Clean area.

Pots have to be inclined towards

the power water jets.

The third rack was designed

to house the cutlery.

Arrange the cutlery as shown

in the gure.

A separate arrangement

of the cutlery makes collection

easier after washing and improves

washing and drying performance.

CUTLERY RACK

Knives and other utensils with

sharp edges must be positioned

with the blades facing

downwards.

The geometry of the rack makes

it possible to place such small

items as coee cups in the area

in the middle.

11

Daily use

Advice and tips

TIPS

Before loading the baskets, remove all food residues from the crockery

and empty the glasses. You do not need to rinse beforehand under

running water.

Arrange the crockery so that it is held in place rmly and does not tip

over; and arrange the containers with the openings facing downwards

and the concave/convex parts placed obliquely, thus allowing the water

to reach every surface and ow freely.

Warning: lids, handles, trays and frying pans do not prevent the sprayer

arms from rotating.

Place any small items in the cutlery basket.

Very soiled dishes and pans should be placed in the lower basket

because in this sector the water sprays are stronger and allow a higher

washing performance.

After loading the appliance, make sure that the sprayer arms can rotate

freely.

UNSUITABLE CROCKERY

• Wooden crockery and cutlery.

• Delicate decorated glasses, artistic handicraft and antique crockery.

Their decorations are not resistant.

• Parts in synthetic material which do not withstand high temperatures.

• Copper and tin crockery.

• Crockery soiled with ash, wax, lubricating grease or ink.

The colours of glass decorations and aluminium/silver pieces can

change and fade during the washing process. Some types of glass (e.g.

crystal objects) can become opaque after a number of wash cycles too.

DAMAGE TO GLASS AND CROCKERY

• Only use glasses and porcelain guaranteed by the manufacturer

as dishwasher safe.

• Use a delicate detergent suitable for crockery

• Collect glasses and cutlery from the dishwasher as soon as the wash

cycle is over.

TIPS ON ENERGY SAVING

• When the household dishwasher is used according

to the manufacturer’s instructions, washing tableware

in a dishwasher usually consumes less energy and water than

hand dishwashing.

• In order to maximize dishwasher eciency it is recommended

to initiate the wash cycle once dishwasher is fully loaded.

Loading the household dishwasher up to the capacity indicated

by the manufacturer will contribute to energy and water savings.

Information on correct loading of tableware can be found in Loading

chapter.

In case of partial loading it is recommended to use dedicated

wash options if available (Half load/ Zone Wash, Multizone), illing up

only selected racks. Incorrect loading or overloading the dishwasher

may increase resources usage (such as water, energy and time, as well

as increase noise level), reducing cleaning and drying performance.

• Manual pre-rinsing of tableware items leads to increased water

and energy consumption and is not recommended.

HYGIENE

To avoid odour and sediment which can be accumulated

in the dishwasher please run a high temperature program

at least one a month. Use a tea spoon of detergent and run it without

the loading to clean your appliance.

1. CHECK WATER CONNECTION

Check that the dishwasher is connected to the water supply

and that the tap is open.

2. SWITCH ON THE DISHWASHER

Open the door and press the ON/OFF button.

3. LOAD THE RACKS (see LOADING THE RACKS).

4. FILLING THE DETERGENT DISPENSER

5. CHOOSE THE PROGRAM AND CUSTOMISE THE CYCLE

Select the most appropriate program in accordance with the type

of crockery and its soiling level (see PROGRAMS DESCRIPTION)

by pressing the P button.

Select the desired options (see OPTIONS AND FUNCTIONS).

6. START

Start the wash cycle by pressing START/Pause button (led is

lit) and closing the door within 4 sec. When the program starts

you hear a single beep. If the door was not closed within 4sec.,

the alarm sound will be played. In this case, open the door, press

START/Pause button and close the door again within 4 sec.

7. END OF WASH CYCLE

The end of the wash cycle is indicated by beeps and by the ash-

ing of the wash cycle number on the display. Open the door

and switch o the appliance by pressing the ON/OFF button.

Wait for a few minutes before removing the crockery - to avoid

burns. Unload the racks, beginning with the lower one.

The machine will switch o automatically during certain extended

periods of inactivity, in order to minimise electricity consumption.

If the crockery is only lightly soiled or if it has been rinsed with

water before being placed in the dishwasher, reduce the amount

of detergent used accordingly.

MODIFYING A RUNNING PROGRAM

If a wrong program was selected, it is possible to change it, provided

that it has only just begun: open the door, press and hold the

ON/OFF button, the machine will switch o.

Switch the machine back on using the ON/OFF button and select

the new wash cycle and any desired options; Start the wash cycle

by pressing START/Pause button (led is lit) and closing the door within

4 sec.

ADDING EXTRA CROCKERY

Without switching o the machine, open the door (START/Pause

led starts blinking) (be ware of HOT steam!) and place the crockery

inside the dishwasher. Press the START/Pause button and close

the door within 4 sec., the cycle will resume from the point at which

it was interrupted.

ACCIDENTAL INTERRUPTIONS

If the door is opened during the wash cycle, or if there is a power cut,

the cycle stops. Press the START/Pause button and close the door

within 4 sec., the cycle will resume from the point at which it was

interrupted.

12

CLEANING THE DISHWASHER

Any marks on the inside of the appliance may be re-

moved using a cloth dampened with water and a little

vinegar.

The external surfaces of the machine and the control

panel can be cleaned using a non-abrasive cloth

which has been dampened with water. Do not use

solvents or abrasive products.

PREVENTING UNPLEASANT ODOURS

Always keep the door of the appliance ajar in order to avoid moisture

from forming and being trapped inside the machine.

Clean the seals around the door and detergent dispensers regularly

using a damp sponge. This will avoid food becoming trapped in the se-

als, which is the main cause behind the formation of unpleasant odours.

CHEKING THE WATER SUPPLY HOSE

Check the inlet hose regularly for brittleness and cracks. If damaged,

replace it by a new hose available through our After-Sales Service

or your specialist dealer. Depending on the hose type:

If the inlet hose has a transparent coating, periodically check if the co-

lour intensies locally. If yes, the hose may have a leak and should

be replaced.

For water stop hoses: check the small safety valve inspection win-

dow (see arrow). If it is red, the water stop function was triggered,

and the hose must be replaced by a new one.

For unscrewing this hose, press the release button while unscrewing

the hose.

CLEANING THE WATER INLET HOSE

If the water hoses are new or have not been used for an extended

period of time, let the water run to make sure it is clear and free of im-

purities before performing the necessary connections. If this precau-

tion is not taken, the water inlet could become blocked and damage

the dishwasher.

CLEANING THE FILTER ASSEMBLY

Regularly clean the lter assembly so that the lters do not clog

and that the waste water ows away correctly.

Using dishwasher with clogged lters or foreign objects inside ltra-

tion system or sprayarms may cause unit malfunction resulting in lose

of performance, noisy work or higher resources usage.

The lter assembly consists of three lters which remove food residues

from the washing water and then recirculate the water.

The dishwasher must not be used without lters or if the lter is

loose.

ATTENTION: Always unplug the appliance when cleaning it and when performing maintenance work.Do not use ammable liquids to clean

the machine.

At least once per month or after each 30 cycles, check the lter assembly

and if necessary clean it thoroughly under running water, using a non-

-metallic brush and following the instructions below:

1. Turn the cylindrical lter A in an anti-clockwise direction and pull

it out (Fig 1).

2. Remove the cup lter B by exerting a slight pressure on the side

aps (Fig 2).

3. Slide out the stainless-steel plate lter C (Fig 3).

4. In case you nd foreign objects (such as broken glass, porcelain,

bones, fruit seeds etc.) please remove them carefully.

5. Inspect the trap and remove any food residues. NEVER REMOVE

the wash-cycle pump protection (black detail) (Fig 4).

After cleaning the lters, re-place the lter assembly and x it in po-

sition correctly; this is essential for maintaining the ecient operation

of the dishwasher.

CLEANING THE SPRAY ARMS

On occasions, food residue may be-

come encrusted onto the spray arms

and block the holes used to spray

the water. It is therefore recommended

that you check the arms from time

to time and clean them with a small

non-metallic brush.

To remove the upper spray arm, turn

the plastic locking ring in an anti-cloc-

kwise direction. The upper spray arm

should be replaced so that the side with the greater number of holes

is facing upwards.

The lower spray arm may be removed

by pulling it upwards.

21

43

A

C

A

B

Care and maintenance

13

Troubleshooting

In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list.

For other errors or issues please contact authorized After-sales Service which contact details can be found in the warranty booklet.

The manufacturer ensures the availability of spare parts for at least 10 years after production date of this appliance.

PROBLEMS POSSIBLE CAUSES SOLUTIONS

Salt

indicator is lit

Salt reservoir is empty. (After rell the salt in-

dicator may remain lit for several wash cycles).

Rell reservoir with salt (for more information - see page 2).

Adjust water hardness - see table, page 2.

Rinse aid

indicator is lit

Rinse aid dispenser is empty. (After rell the rin-

se aid indicator may remain lit for several wash

cycles).

Rell dispenser with rinse aid (for more information - see page 2).

The dishwasher

won’t start or does

not respond

to commands.

The appliance has not been plugged

in properly.

Insert the plug into the socket.

Power outage.

For safety reasons, dishwasher will not re-start automatically when power returns.

Open dishwasher door, press START/Pause button and close the door within 4

seconds.

The dishwasher door is not closed.

Auto Door Opening pin is not pulled in.

Vigorously push the door until you hear the “click”.

Cycle is interupted by door opening for more

than 4 seconds.

Press START/Pause and close the door within 4 seconds.

It does not respond to commands.

Display shows: 9 or 12 and On/O LED is

blinking rapidly

Switch o the appliance by pressing the ON/OFF button, switch it back on after

approximately one minute and restart the program. If problem persists, unplug

the appliance for 1 minute, then plug it back in.

The dishwasher

won’t drain.

Display shows:

3 and On/O LED

is blinking rapidly

The wash cycle has not nished yet. Wait until the wash cycle nishes.

The drain hose is bent. Check that the drain hose is not bent (see INSTALATION INSTRUCTION).

The sink drain pipe is blocked. Clean the sink drain pipe.

The lter is clogged up with food residues. Clean the lter (see CLEANING THE FILTER ASSEMBLY).

The dishwasher

makes excessive

noise.

The dishes are rattling against each Position the crockery correctly (see LOADING THE RACKS).

An excessive amount of foam has been pro-

duced.

The detergent has not been measured out correctly or it is not suitable for use

in dishwashers (see FILLING THE DETERGENT DISPENSER). Restart the current cycle

by switching OFF the dishwasher, then switch it on again, select a new program,

press START/Pause and close the door within 4 seconds. Please do not add any

detergent.

The dishes are not

clean.

The crockery has not been arranged properly. Arrange the crockery correctly (see LOADING THE RACKS).

The spray arms cannot rotate freely, being

hindered by the dishes.

Arrange the crockery correctly (see LOADING THE RACKS).

The wash cycle is too gentle. Select an appropriate wash cycle (see PROGRAMS TABLE).

An excessive amount of foam has been pro-

duced.

The detergent has not been measured out correctly or it is not suitable for use

in dishwashers (see FILLING THE DETERGENT DISPENSER).

The cap on the rinse aid compartment has not

been shut correctly.

Make sure the cap of the rinse aid dispenser is closed.

The lter is soiled or clogged. Clean the lter assembly (see CARE AND MAINTENANCE).

There is no salt. Fill the salt reservoir (see FILLING THE SALT RESERVOIR).

The dishwasher

does not ll

the water.

Display shows: H,

6 and On/O LED

is blinking rapidly

No water in the water supply or the tap is

closed.

Make sure there is water in the water supply or the tap running.

The inlet hose is bent.

Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dishwasher

and reboot.

The sieve in the water inlet hose is clogged;

it is necessary to clean it

After having carried out the verication and cleaning, turn o and turn

on the dishwasher and restart a new program.

Dishwasher

nishes the cycle

prematurely.

Display shows: 15

and On/O LED is

blinking

rapidly

Drain hose positioned too low or siphoning

into home sewage system.

Check if end of drain hose is placed at correct height (see INSTALLATION).Check

for siphoning into home sewage system, install air admittance valve if necessary.

Air in water supply. Check water supply for leaks or other issues letting air inside.

14

Policy and standard documentation and additional product information can be found by:

• Visiting our website docs.kitchenaid.eu

• Using QR Code

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet).

When contacting our After-sales Service, please state the codes provided on your product‘s

identication plate.

IEC 436

:

The model information can be retrieved using the QR-Code reported in the energy label.

The label also includes the model identier that can be used to consult the portal of the registry at https://eprel.ec.europa.eu

(available only on certain models).

After-sales service

15

EN

Printed in Italy

11/20

400011509129B

Brugsanvisninger

2

3

Installation ...............................................................................................................................................................................................4

Beskrivelse af produktet .....................................................................................................................................................................5

Ved første gangs brug .........................................................................................................................................................................6

Programtabel ..........................................................................................................................................................................................8

Indstillinger og funktioner ................................................................................................................................................................. 9

Fyldning af kurvene ........................................................................................................................................................................... 10

Daglig brug ........................................................................................................................................................................................... 11

Gode råd og tips ................................................................................................................................................................................. 11

Pleje og vedligeholdelse.................................................................................................................................................................. 12

Fejlnding ............................................................................................................................................................................................. 13

Service .................................................................................................................................................................................................... 14

4

Opstilling

BEMÆRK: Ved ytning af opvaskemaskinen skal den holdes i opretstående position. Hvis det er absolut nødvendigt, kan den lægges ned på ba-

gsiden.

Læs sikkerhedsanvisningerne med omhu, inden apparatet tages i brug.

TILSLUTNING AF VANDFORSYNING

Tilpasning af vandforsyningen til installationen skal udføres af en

uddannet vvs-installatør.

Vandindløbs- og aøbsslangerne kan placeres til højre eller venstre

for at opnå den bedst mulige installation.

Kontroller, at slangerne ikke bøjes eller klemmes af opvaskemaskinen.

TILSLUTNING AF VANDINDLØBSSLANGEN

• Lad vandet løbe, til det er helt klart.

• Skru indløbsslangen godt fast, og åbn for hanen.

Hvis indløbsslangen ikke er lang nok, skal du kontakte en specialfor-

handler eller en autoriseret vvs-installatør.

Vandtrykket skal ligge inden for de værdier, der er angivet i tabellen

Tekniske data. I modsat fald fungerer opvaskemaskinen muligvis ikke

korrekt.

Kontroller, at slangen ikke er bøjet eller klemt.

SPECIFIKATIONER FOR TILSLUTNING AF VANDINDLØBSSLANGEN:

VANDFORSYNING kold eller varm (maks. 60°C)

VANDINDLØB 3/4"

VANDTRYK

0,05 ÷ 1 MPa (0,5 ÷ 10 bar)

7,25 – 145 psi

TILSLUTNING AF AFLØBSSLANGEN

Forbind aøbsslangen til en aøbsskakt med en diameter på mindst

2cm A.

Tilslutningen af aøbsslangen skal ske i en højde på 40 til 80 cm

fra gulvet eller det underlag, opvaskemaskinen står på.

Før aøbsslangen kobles til vaskens aøb, skal plastproppen B ernes.

OVERSVØMMELSESSIKRING

Oversvømmelsessikring. For at sikre mod oversvømmelse har opvaske-

maskinen:

- et særligt system, som blokerer vandindløbet i tilfælde af en unormal

situation eller utætheder inde i maskinen.

Nogle modeller har desuden en yderligere sikkerhedsanordning, New

Aqua Stop (Nyt vandstop), som sikrer beskyttelse mod oversvømmel-

se i tilfælde af brud på en indløbsslange.

Der må aldrig skæres i vandindløbsslangen, da den indeholder strøm-

førende dele.

TILSLUTNING TIL STRØMFORSYNINGEN

ADVARSEL: Der må aldrig skæres i vandindløbsslangen, da

den indeholder strømførende dele.

Før stikket sættes i kontakten, skal følgende kontrolleres:

• At kontakten er jordet og opfylder gældende lovgivning;

• At stikket kan holde til apparatets spidsbelastning som anført

i på typeskiltet indvendigt på lågen (se

PRODUKTBESKRIVELSE).

• At forsyningsspændingen er inden for de værdier, som er angivet

på typeskiltet indvendigt på lågen.

• At stikket passer til maskinens stikprop.

Hvis det ikke er tilfældet, skal stikproppen udskiftes af en autoriseret

elektriker (se ASSISTANCE). Der må ikke anvendes forlængerledninger

eller multistikdåser. Når maskinen er installeret, skal der være nem

adgang til stikkontakten og strømkablet.

Kablet må ikke bøjes eller presses sammen.

Hvis strømkablet er beskadiget, skal det udskiftes af producenten eller

dennes godkendte servicetekniker for at undgå alle potentielle farer.

Virksomheden er ikke ansvarlig for nogen hændelser, hvis disse regler

ikke er overholdt.

OPSTILLING OG NIVELLERING

1. Opvaskemaskinen skal stå på et vandret og robust gulv. Hvis gulvet

er ujævnt, kan maskinens forreste fødder justeres, til maskinen står

vandret. Hvis maskinen er nivelleret korrekt, står den mere stabilt,

og det er mindre sandsynligt, at den vil ytte sig og forårsage vibra-

tioner og støj, når den kører.

2. Montér den selvklæbende transparente lm under træhylden,

for at beskytte den mod eventuel kondens, før opvaskemaskinen

indbygges.

3. Placer opvaskemaskinen, så siderne eller bagpanelet berører de til-

stødende skabe eller væggen. Maskinen kan også indbygges under

et køkkenbord.

4. Drej på den røde, sekskantede bøsning forneden ved midten af va-

skemaskinens forside med en sekskantnøgle med en åbning på 8

mm, for at justere højden på den bagerste støtte. Drej nøglen med

uret, for at forøge højden, og imod uret, for at reducere den.

MÅL OG KAPACITET:

BREDDE 598 mm

HØJDE 820mm

DYBDE 555 mm

KAPACITET 14 standardkuverter

MIN 40 cm

MAX 80 cm

Sivu latautuu ...

KitchenAid KICO 3T133 PFES Käyttöohjeet

KitchenAid KICO 3T133 PFES Käyttöohjeet

muilla kielillä

Liittyvät paperit

Muut asiakirjat