Iqua Vogue BHS-603 Ohjekirja

Bluetooth

®

Wireless Headset

BHS -603

User Guide

BHS-701_Headset_US_UG.fm Page 14 Monday, August 14, 2006 1:02 PM

1

EN

BHS-603 sales package content

Overview of the product

b)

c)

d)

a)

f)

g)

e)

603.book Page 1 Friday, September 22, 2006 1:28 PM

2

Product Specifications

Model BHS-603

Size 50 (L) x 25 (W) x 10 (H) mm

Weight 12g

Talktime Up to 9h

Standby time Up to 200h

Charging time Within 2h

Battery type Li-Polymer battery

Bluetooth Standard Bluetooth Specification 2.0 /Class II

Supported Bluetooth profiles Handsfree 1.5 and Headset 1.1

Connection Point-to-point

Paired devices Up to 8, one at a time

Operating Distance 10 meters

Operating temperature range 0°C to 45°C

Storage temperature range -20°C to 55°C

603.book Page 2 Friday, September 22, 2006 1:28 PM

3

EN

Contents

English ................................................................................................................4

Suomi.................................................................................................................13

Svenka ...............................................................................................................23

Norsk..................................................................................................................33

Dansk.................................................................................................................43

Deutsch..............................................................................................................53

Nederlands ........................................................................................................63

Français ............................................................................................................73

Español .............................................................................................................83

Português...........................................................................................................93

Italiano ............................................................................................................103

Türkçe .............................................................................................................113

Ελληνικα ..........................................................................................................123

Русский............................................................................................................133

603.book Page 3 Friday, September 22, 2006 1:28 PM

4

Overview of the product

BHS-603 sales package content

(See page 1)

a) Headset

b) Wall charger

c) User guide

d) Quick guide

e) Earhook

f) 2 earplugs (one on headset)

g) Carrying strap

Overview of the product (See page 1)

1. Multifunction-button

Power on/off, answer/end call

2. Volume + button

Increases the volume

3. Volume - button

Decreases the volume

4. Charging connector

Mini-USB charging connector

5. Indicator Light

Status indication with blue and red lights

603.book Page 4 Friday, September 22, 2006 1:28 PM

5

EN

Getting Started

Charging the battery

Before using BHS-603 for the first time, you must charge it for approximately 2 hours. When

the battery is fully charged, it provides up to 9 hours of talk time and up to 200 hours of standby

time. Always use the charger provided in the sales package.

1. Connect the charger cable to BHS-603.

2. Plug the charger into a wall socket. The red light will turn on.

3. When the battery is fully charged, the red light will turn off.

Switching on and off

Switching on BHS-603

When the headset is powered off, press and hold the Multifunction -button until the blue light

flashes.

Switching off BHS-603

When the headset is powered on, press and hold the Multifunction -button until the red light

flashes.

603.book Page 5 Friday, September 22, 2006 1:28 PM

6

Pairing the BHS-603 and your mobile phone

Pairing is the process of linking BHS-603 with your compatible Bluetooth mobile phone*. After

this process is completed, you can use the BHS-603 with the paired mobile phone. If you want

to use the BHS-603 with another mobile phone, you must repeat the pairing process again.

Even though BHS-603 can be paired with up to 8 compatible phones it can only be connected

to one phone at a time. Once it is paired with 8 phones, the 9

th

paired device will replace the

1

st

paired device.

Pairing process

1. Power on the headset, press and hold both Volume + and Volume - buttons until the blue

and red lights start flashing alternately.

2. Release the button. BHS-603 is now in pairing mode.

3. Check your phone user guide for details on how to search and pair.

4. When phone has found the headset, it will show Iqua BHS-603 on its screen.

5. In order to pair with the phone, enter the PIN code 0000.

6. After pairing, BHS-603 automatically connects with your mobile phone. Once pairing and

connection are succeeded, blue light flashes twice every 8 seconds. The headset is now

ready to make and receive calls.

* For latest compatibility information please visit www.iqua.com

603.book Page 6 Friday, September 22, 2006 1:28 PM

7

EN

Disconnecting BHS-603 and your phone

To disconnect BHS-603 and the phone, simply switch off the headset.

Reconnecting the paired BHS-603 with the phone

To reconnect BHS-603 to the last phone used, simply switch on the headset and it will

automatically connect to the phone.

There are occasions when headset is temporarily out of Bluetooth operating range (up to

10 meters, e.g. user wearing the headset walks away from the phone), the headset will be

disconnected from the phone and user will hear a warning tone from the headset). Headset

is now in “powered on but no Bluetooth connection” –mode (blue light flashes once every

5 seconds). If the headset is back in range within 10 minutes, the BHS-603 auto-reconnects

with the last phone. If the headset is out of range for over 10 minutes, long press both

Multifunction and Volume + buttons or both Multifunction and Volume - buttons to re-

activate the connection.

603.book Page 7 Friday, September 22, 2006 1:28 PM

8

Call Functions

Answer a call

Press the Multifunction -button shortly to answer an incoming call.

End a call

To end an active call, press shortly the Multifunction -button. You will hear a tone when the

call is ended.

Reject a call

When you receive an incoming call that you do not want to answer, double press the

Multifunction –button to reject.

Redial the last dialed number

Press and hold the Volume + button until you hear a tone.*

Voice dialing (when supported by the phone)

Press and hold the Volume – button until you hear a tone (Voice Dial feature activated on the

phone), speak the voice tag. Refer to the user guide of your phone for details. Some phone

models do not support voice dialing.

* With some phone models, press the Volume + button again to dial the number displayed on the phone.

603.book Page 8 Friday, September 22, 2006 2:04 PM

9

EN

Adjusting volume

Press the Volume + button to increase the volume. Press Volume – button to decrease

volume.

Mute & un-mute

During an on-going a call, press and hold both Multifunction and Volume + buttons until you

hear a tone.

Switch between phone & headset

To transfer call from your headset to your phone or vice versa, press and hold both

Multifunction and Volume – buttons. You will hear a tone when the transfer is successful.

Erase paired devices

The BHS-603 can be paired to up to 8 devices. Once it is already paired to 8 devices, the 9

th

paired device will replace the 1

st

paired device. You can also erase the paired device list of

the headset in order to pair it with new devices. While the headset is powered on but not

connected with any Bluetooth device, press and hold the Volume + button for 5 seconds until

you hear a tone.

Reset hardware

In case the headset is jammed you may do hardware reset and restart the headset. Plug

charger to headset and at the same time press and hold the Volume + button. Release

Volume + button, the headset will be powered off.

603.book Page 9 Friday, September 22, 2006 2:04 PM

10

Light indication summary

The BHS-603’s LED lights can be blue or red and are usually accompanied by a sound signal.

Power on / off Blue LED flashes once/Red LED flashes once

Powered on but no Bluetooth connection Blue LED flashes once every 5 seconds

Connection active Blue LED flashes twice every 8 seconds

Pairing mode Blue and red LED flashes alternately

Battery low Battery low tone is played

Battery charging Red LED is on continuously

603.book Page 10 Friday, September 22, 2006 2:04 PM

11

EN

Power Management

This product is powered by a built-in rechargeable battery which can not be changed. Do not

attempt to replace the battery. Rechargeable battery can be charged and discharged

hundreds of times, but it will eventually wear out. After a period of time that will vary depending

on the use and usage conditions you may find that the built-in battery will power your product

for only a couple of hours requiring you to charge more frequently.

Do charge your device only with the charger provided in the sales package. Unplug the

charger when not in use. Do not leave the device connected to the charger for longer period

than needed, since overcharging may shorten the battery lifetime.

If left unused a fully charged battery will discharge itself over time.

Temperature extremes may affect the ability of the battery to charge. Always try to keep the

device between 15 °C and 25 °C (59 °F and 77 °F). Leaving the device in hot or cold places

such as in closed car in summer or winter conditions will reduce the capacity and lifetime of

the battery. A device with hot or cold battery may not work for a while even when the battery

is fully charged. Battery performance is particularly limited in temperatures well below

freezing. Do not charge in humid environment.

603.book Page 11 Friday, September 22, 2006 2:04 PM

12

Care and Maintenance

– Do not expose the device to liquid, moisture or humidity as it is not waterproof.

– Do not use or store the device in dusty, dirty areas. Its moving parts and electronic

– components can be damaged.

– Do not store the device in hot areas. High temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain plastics.

– Do not store the device in cold areas. When the device returns to its normal temperature,

moisture can form inside the device and damage electronic circuit boards.

– Do not drop, knock, or shake the device. Rough handling can break internal circuit boards

and fine mechanics.

– Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.

– Use a soft, clean, dry cloth to clean any lenses.

– Do not expose your device to contact with sharp objects as this will cause scratches and

damage.

– Do not stick anything inside the device as this may damage internal components.

– Do not dismantle the device or the charger as they do not contain serviceable parts and

taking apart the device may expose you to dangerous voltages or other hazards

Act according to your local rules and do not dispose of this product as part of your

normal household waste. Follow the applicable separate collection system for

electrical and electronic products.

603.book Page 12 Friday, September 22, 2006 2:04 PM

13

EN

products or warranty given by the retailer who has sold the IQUA Product to you, please

contact your retailer.

DECLARATION OF CONFORMITY

We, Iqua Ltd., declare under our sole responsibility, that the product, BHS-603, conforms with

the provisions of the following Council Directive: 1999/5/EC.

0560 FCC-ID: TUF-BHS603 6574A-BHS603

IC:

603.book Page 13 Friday, September 22, 2006 1:28 PM

603.book Page 14 Friday, September 22, 2006 1:28 PM

15

FI

Tuotteen yleiskuva

BHS-603:n myyntipakkauksen

sisältö

(Katso sivu 1)

a) HF-laite

b) Seinälaturi

c) Käyttöopas

d) Pikaopas

e) Korvasanka

f) 2 korvatulppaa (yksi laitteessa)

g) Kantohihna

Tuotteen yleiskuvaus (Katso sivu 1)

1. Monitoimipainike

Virran kytkeminen ja katkaisu, puheluun

vastaaminen ja sen lopettaminen

2. Äänenvoimakkuus + -painike

Lisää äänenvoimakkuutta.

3. Äänenvoimakkuus – -painike

Pienentää äänenvoimakkuutta.

4. Latausliitäntä

Mini-USB-latausliitin

5. Merkkivalo

Toimintatilan osoitus sinisellä tai punaisella

merkkivalolla

603.book Page 15 Friday, September 22, 2006 1:28 PM

16

Aloittaminen

Akun lataaminen

Ennen kuin käytät BHS-603:a ensimmäisen kerran, sitä on ladattava noin 2 tuntia. Kun akku

on ladattu täyteen, sillä voi puhua jopa 7 tuntia ja pitää laitetta 200 tuntia valmiustilassa. Käytä

aina myyntipakkauksen mukana toimitettua laturia.

1. Kytke laturin johto BHS-603:een.

2. Kytke laturi pistorasiaan. Punainen merkkivalo syttyy.

3. Kun akku on ladattu täyteen, punainen merkkivalo sammuu.

Virran kytkeminen ja katkaiseminen

Virran kytkeminen BHS-603:een

Kun laitteen virta on katkaistu, paina monitoimipainiketta, kunnes sininen merkkivalo

vilkkuu.

Virran katkaiseminen BHS-603:sta

Kun laitteen virta on kytketty, paina monitoimipainiketta, kunnes punainen merkkivalo

vilkkuu.

603.book Page 16 Friday, September 22, 2006 1:28 PM

17

FI

BHS-603:n liittäminen matkapuhelimeen

Liittäminen tarkoittaa, että BHS-603 linkitetään Bluetooth-yhteensopivan matkapuhelimen

kanssa*. Kun liittäminen on tehty, voit käyttää BHS-603:a liitetyn matkapuhelimen kanssa. Jos

haluat käyttää BHS-603:a jonkin muun matkapuhelimen kanssa, liittäminen täytyy tehdä

uudelleen. Vaikka BHS-603 voidaan liittää jopa 8 yhteensopivaan puhelimeen, se voi olla

liitettynä vain yhteen puhelimeen kerrallaan. Kun se on liitetty 8 puhelimeen, 9. liitetty laite

korvaa ensimmäisenä liitetyn laitteen.

Liittäminen

1. Kytke laitteeseen virta ja paina sekä Äänenvoimakkuus +- että Äänenvoimakkuus – -

painikkeita, kunnes valot alkavat vilkkua vuoroin sinisenä, vuoroin punaisena.

2. Vapauta painike. BHS-603 on nyt liittämistilassa.

3. Katso puhelimen käyttöoppaasta tietoja etsimisestä ja liittämisestä.

4. Kun puhelin on löytänyt laitteen, sen näytössä näkyy Iqua BHS-603.

5. Liitännän aktivoimiseksi on vielä annettava PIN-koodi, joka on 0000.

6. Liittämisen jälkeen BHS-603 muodostaa automaattisesti yhteyden matkapuhelimeen.

Kun liittäminen ja yhteyden muodostaminen ovat onnistuneet, sininen merkkivalo

välähtää kahdesti 8 sekunnin välein. Laite on nyt valmis soittamaan ja vastaanottamaan

puheluita.

* Uusimmat yhteensopivuustiedot löytyvät osoitteesta www.iqua.com.

603.book Page 17 Friday, September 22, 2006 1:28 PM

18

BHS-603:n ja matkapuhelimen välisen yhteyden katkaiseminen

Katkaise BHS-603:n ja matkapuhelimen välinen yhteys katkaisemalla laitteen virta.

Liitetyn BHS-603:n yhdistäminen uudelleen puhelimeen

Voit yhdistää BHS-603:n viimeksi liitettyyn puhelimeen kytkemällä laitteeseen virran, jolloin se

muodostaa yhteyden automaattisesti.

On tilanteita, joissa laite on tilapäisesti poissa Bluetooth-käyttöalueelta (korkeintaan

10 metriä, esimerkiksi laitteen käyttäjä siirtyy kauemmas puhelimesta), jolloin laitteen yhteys

puhelimeen katkeaa ja käyttäjä kuulee laitteesta varoitusäänen. Laite on nyt ”virta on

kytkettynä, mutta Bluetooth-yhteyttä ei ole” -tilassa (sininen merkkivalo vilkkuu 5 sekunnin

välein). Jos laite palaa takaisin käyttöalueelle 10 minuutin kuluessa, BHS-603 muodostaa

automaattisesti yhteyden uudelleen viimeiseen puhelimeen. Jos laite on käyttöalueen

ulkopuolella yli 10 minuuttia, muodosta yhteys uudelleen pitämällä sekä monitoimi- että

Äänenvoimakkuus + -painikkeet tai sekä monitoimi- että Äänenvoimakkuus – -painikkeet

painettuna.

603.book Page 18 Friday, September 22, 2006 1:28 PM

Sivu latautuu ...

Iqua Vogue BHS-603 Ohjekirja

Iqua Vogue BHS-603 Ohjekirja

muilla kielillä

Liittyvät paperit

Muut asiakirjat