Yamaha V1 Omistajan opas

Tyyppi
Omistajan opas

Tämä käsikirja sopii myös

MOTIF XS Editor VST Installation Guide 1
ATTENTION
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (“AGREEMENT”) CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY
PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS
BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION (“YAMAHA”).
BY DOWNLOADING, INSTALLING, COPYING, OR OTHERWISE USING THIS SOFTWARE YOU ARE AGREEING TO BE BOUND BY THE TERMS
OF THIS LICENSE. IF YOU DO NOT AGREE WITH THE TERMS, DO NOT DOWNLOAD, INSTALL, COPY, OR OTHERWISE USE THIS
SOFTWARE. IF YOU HAVE DOWNLOADED OR INSTALLED THE SOFTWARE AND DO NOT AGREE TO THE TERMS, PROMPTLY DELETE THE
SOFTWARE.
1. GRANT OF LICENSE AND COPYRIGHT
Yamaha hereby grants you the right to use one copy of the software program(s) and data (“SOFTWARE”) accompanying this Agreement. The
term SOFTWARE shall encompass any updates to the accompanying software and data. The SOFTWARE is owned by Yamaha and/or
Yamaha’s licensor(s), and is protected by relevant copyright laws and all applicable treaty provisions. While you are entitled to claim ownership
of the data created with the use of SOFTWARE, the SOFTWARE will continue to be protected under relevant copyrights.
You may use the SOFTWARE on your computer(s).
You may make one copy of the SOFTWARE in machine-readable form for backup purposes only, if the SOFTWARE is on media where
such backup copy is permitted. On the backup copy, you must reproduce Yamaha's copyright notice and any other proprietary legends
that were on the original copy of the SOFTWARE.
You may permanently transfer to a third party all your rights in the SOFTWARE, provided that you do not retain any copies and the
recipient reads and agrees to the terms of this Agreement.
2. RESTRICTIONS
You may not engage in reverse engineering, disassembly, decompilation or otherwise deriving a source code form of the SOFTWARE
by any method whatsoever.
You may not reproduce, modify, change, rent, lease, or distribute the SOFTWARE in whole or in part, or create derivative works of the
SOFTWARE.
You may not electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with other
computers.
You may not use the SOFTWARE to distribute illegal data or data that violates public policy.
You may not initiate services based on the use of the SOFTWARE without permission by Yamaha Corporation.
Copyrighted data, including but not limited to MIDI data for songs, obtained by means of the SOFTWARE, are subject to the following
restrictions which you must observe.
Data received by means of the SOFTWARE may not be used for any commercial purposes without permission of the copyright owner.
Data received by means of the SOFTWARE may not be duplicated, transferred, or distributed, or played back or performed for listeners
in public without permission of the copyright owner.
The encryption of data received by means of the SOFTWARE may not be removed nor may the electronic watermark be modified
without permission of the copyright owner.
3. TERMINATION
This Agreement becomes effective on the day that you receive the SOFTWARE and remains effective until terminated. If any copyright law or
provisions of this Agreement is violated, the Agreement shall terminate automatically and immediately without notice from Yamaha. Upon such
termination, you must immediately destroy the licensed SOFTWARE, any accompanying written documents and all copies thereof.
4. DISCLAIMER OF WARRANTY ON SOFTWARE
You expressly acknowledge and agree that use of the SOFTWARE is at your sole risk. The SOFTWARE and related documentation are provided
“AS IS” and without warranty of any kind. NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, YAMAHA EXPRESSLY
DISCLAIMS ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS, AND IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS.
SPECIFICALLY, BUT WITHOUT LIMITING THE FOREGOING, YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE
SOFTWARE WILL BE CORRECTED.
SOFTWARE LICENSING AGREEMENT
MOTIF XS Editor VST
Installation Guide
MOTIF XS Editor VST
Installation Guide
MOTIF XS Editor VST Installation Guide 2
5. LIMITATION OF LIABILITY
YAMAHA’S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF THE SOFTWARE UNDER THE TERMS HEREOF. IN NO EVENT
SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES ARISING OUT OF
THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. In no event shall Yamaha's total liability to you for all damages, losses and causes of action (whether in
contract, tort or otherwise) exceed the amount paid for the SOFTWARE.
6. THIRD PARTY SOFTWARE
Third party software and data (“THIRD PARTY SOFTWARE”) may be attached to the SOFTWARE. If, in the written materials or the electronic data
accompanying the Software, Yamaha identifies any software and data as THIRD PARTY SOFTWARE, you acknowledge and agree that you must
abide by the provisions of any Agreement provided with the THIRD PARTY SOFTWARE and that the party providing the THIRD PARTY
SOFTWARE is responsible for any warranty or liability related to or arising from the THIRD PARTY SOFTWARE. Yamaha is not responsible in any
way for the THIRD PARTY SOFTWARE or your use thereof.
•Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE. IN ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL
IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, as to the THIRD PARTY SOFTWARE.
•Yamaha shall not provide you with any service or maintenance as to the THIRD PARTY SOFTWARE.
•Yamaha is not liable to you or any other person for any damages, including, without limitation, any direct, indirect, incidental or
consequential damages, expenses, lost profits, lost data or other damages arising out of the use, misuse or inability to use the THIRD
PARTY SOFTWARE.
7. GENERAL
This Agreement shall be interpreted according to and governed by Japanese law without reference to principles of conflict of laws. Any dispute
or procedure shall be heard before the Tokyo District Court in Japan. If for any reason a court of competent jurisdiction finds any portion of this
Agreement to be unenforceable, the remainder of this Agreement shall continue in full force and effect.
8. COMPLETE AGREEMENT
This Agreement constitutes the entire agreement between the parties with respect to use of the SOFTWARE and any accompanying written
materials and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding the subject matter of this
Agreement. No amendment or revision of this Agreement will be binding unless in writing and signed by a fully authorized representative of
Yamaha.
The software and this Installation Guide are the exclusive copyrights of Yamaha Corporation.
Please read carefully the Software Licensing Agreement at the front of this Installation Guide before installing the application.
Copying of the software or reproduction of this Installation Guide in whole or in part by any means is expressly forbidden without the written
consent of the manufacturer.
•Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for
the results of the use of this Installation Guide and the software.
Future upgrades of application and system software and any changes in specifications and functions will be announced at the following
website. http://www
.yamahasynth.com/download/
The screen displays as illustrated in this Installation Guide are for instructional purposes, and may appear somewhat different from the
screens which appear on your computer.
Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for
your personal use.
Windows is the registered trademarks of Microsoft
®
Corporation.
Apple and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.
FireWire and the FireWire symbol are trademarks of Apple, Inc., registered in the U.S. and other countries. The FireWire logo is a trademark of
Apple, Inc.
Steinberg and Cubase are the registered trademarks of Steinberg Media Technologies GmbH.
The company names and product names in this Installation Guide are the trademarks or registered trademarks of their respective companies.
Special Notices
MOTIF XS Editor VST Installation Guide 3
MOTIF XS Editor VST is a convenient tool which lets you edit and save the various parameters of your MOTIF XS
synthesizer. These include Common/Part Mixing parameters (edited in the Song or Pattern mode of the MOTIF XS)
such as Volume, Pan, EG, and Cutoff, as well as parameters of a Voices assigned to each Part (edited in the Voice
mode of the MOTIF XS). Thanks to the easy-to-understand graphical interface, you can edit various parameters of
the MOTIF XS right from your computer—using the mouse to adjust the virtual knobs, sliders, and buttons and
entering values from the computer keyboard. Finally, all the changes you have made can be saved to your
computer or transmitted to the MOTIF XS instrument.
The MOTIF XS Editor VST, based on the “VST3 technology” by Steinberg, works as a VST3 plug-in with Cubase
series 4.5 or later (DAW application). The MOTIF XS Editor VST also works as the same way as other VST
instrument software, allowing you to save the edited settings of the MOTIF XS, or use them for another project. In
addition, you can handle the MOTIF XS Voices in the Media Bay window in Cubase when using the MOTIF XS
Editor VST with Cubase 4.5 or later, allowing you to search for, listen, and play the MOTIF XS Voices within Media
Bay in Cubase. The MOTIF XS Editor VST provides a comprehensive and seamless music production environment
– making the use of hardware and software both easier and much more efficient.
The actual installation steps and the use of the software itself differs depending on the operating system that you
are using. Please refer to the appropriate installation instructions.
1 Verify that your system (DAW application) meets the operating requirements of each software program.
...........................................................................................................................................................................................page 4
2 Install the appropriate driver to your computer. .................................................................................................page 5
3 Install the MOTIF XS Editor VST............................................................................................................................page 6
4 Start up the MOTIF XS Editor VST in the DAW application. .........................................................................page 6
For subsequent operations, refer to the PDF manual accessed from the [HELP] menu in the respective software
program.
Precautions when using the USB TO HOST connector
When connecting the computer to the USB TO HOST connector, make sure to observe the following points. Failing to do so
risks freezing the computer and corrupting or even losing the data. If the computer or the instrument freezes, turn the power
to the instrument off or restart the computer.
Before connecting the computer to the USB TO HOST connector, exit from any power-saving mode
(such as suspended, sleep, standby) of the computer.
Before turning on the power to the instrument, connect the computer to the USB TO HOST connector.
Execute the following before turning the power to the instrument on/off or plugging/unplugging the USB
cable to/from the USB TO HOST connector.
- Quit any open applications.
- Make sure that data is not being transmitted from the instrument. (Data is transmitted only by playing
notes on the keyboard or playing back a song.)
While a USB device is connected to the instrument, you should wait for six seconds or more between
these operations: (1) when turning the power of the instrument off then on again, or (2) when alternately
connecting/disconnecting the USB cable.
MOTIF XS Editor VST
Installing the Software
CAUTION
MOTIF XS Editor VST Installation Guide 4
The system requirements below may differ slightly depending on the particular operating system.
Windows
Macintosh
n Keep in mind that the software is often updated and the system requirements are subject to change. You can check the latest version
information of each program and its system requirements at the following website
http://www.yamahasynth.com/
The system requirements may differ slightly depending on the particular computer.
When using the MOTIF XS Editor VST, refer to the minimum requirements for the DAW application you are using as well as the minimum
requirements for the MOTIF XS Editor VST given above.
Minimum System Requirements
OS
Windows Vista/Windows XP Home Edition/XP Professional
Computer
Intel Pentium 1.4 GHz or higher
Available Memory
512 MB or more
Hard Disk
200 MB or more
Display
1280 x 800, full color (32 bit)
DAW Application
Cubase 4.5.2 / Cubase Studio 4.5.2 / Cubase Essential 4.5.2 /
Cubase AI 4.5.2 or later
OS
Mac OS X 10.4 or later
Computer
Power PC G4 1GHz or higher CPU / Intel CPU
Available Memory
512 MB or more
Hard Disk
200 MB or more
Display
1280 x 800, full color (32 bit)
DAW Application
Cubase 4.5.2 / Cubase Studio 4.5.2 / Cubase Essential 4.5.2 /
Cubase AI 4.5.2 or later
MOTIF XS Editor VST Installation Guide 5
To use the MOTIF XS Editor VST as a VST3 plug-in of the DAW application, you’ll need to install the following
software programs. Follow the appropriate instructions below corresponding to the software you’re using.
Driver Installation
To operate your Yamaha hardware from your computer via a USB cable or an IEEE1394 cable, you’ll need to install
the USB-MIDI driver software, AI Driver, mLAN Driver/mLAN Tools, or Yamaha Steinberg FW Driver software. The
USB-MIDI driver is necessary when using a USB connection to transfer MIDI data back and forth between your
computer’s DAW application and the MOTIF XS6/7/8.
The AI Driver, mLAN Driver/mLAN Tools, or Yamaha Steinberg FW Driver is necessary when using an IEEE1394
connection to transfer Audio/MIDI data back and forth between your computer’s DAW application and the MOTIF
XS (MOTIF XS6/7 with optional mLAN16E2 installed, or MOTIF XS8).
n MOTIF XS Editor VST cannot be used over a MIDI connection.
n Make sure to properly install an audio device when connecting the MOTIF XS instrument to the computer via USB cable. For more
details, refer to the section “Audio Connection to the Computer” (page 6).
Software Installation
USB-MIDI Driver, AI Driver, mLAN Driver/mLAN Tools, or Yamaha Steinberg FW Driver
•MOTIF XS Extension for Steinberg DAW
•MOTIF XS Editor VST
Make sure to check the following website for installation and up-to-date news on the USB-MIDI driver.
http://www
.global.yamaha.com/download/usb_midi/
Make sure to check the following website for installation and up-to-date news on the AI Driver, mLAN Driver/mLAN Tools,
and Yamaha Steinberg FW Driver.
http://www
.global.yamaha.com/download/
DAW
USB cable
Driver
Computer
IEEE1394 cable MOTIF XS
MOTIF XS Editor VST Installation Guide 6
MOTIF XS Editor VST Installation
Follow the instructions below to install the MOTIF XS Editor VST programs.
[Windows]
1 After the downloaded compressed file is properly extracted, double-click the “setup.exe” file.
The MOTIF XS Editor VST setup dialog appears.
2 Follow the on-screen instructions to install the software.
[Macintosh]
1 After the downloaded compressed file is properly extracted, double-click the “install MOTIF XS Editor
VST.pkg” file.
The MOTIF XS Editor VST setup dialog appears.
2 Follow the on-screen instructions to install the software.
When the MOTIF XS Editor VST and the other necessary software is installed, you can start the MOTIF XS Editor
VST. You’ll need to start the MOTIF XS Editor VST from the VST Instrument window of DAW application. For details
about starting and setting up the DAW application, refer to the manual of the DAW application.
To remove the installed editors from Windows:
Select [START] [Control Panel] [Add or Remove Programs] “Change or Remove Programs”, then select
[Yamaha MOTIF XS Editor VST] to be removed and click [Change/Remove].
Follow the on-screen instructions to uninstall the application.
n The button names or menus may differ depending on the computer OS.
An audio connection between the MOTIF XS instrument and the computer is needed to use the MOTIF XS Editor
VST correctly. With such a connection, the MOTIF XS Editor VST provides full functionality, including the freeze
function, mixing within the Audio Mixer of Cubase, and other convenient features common to other VST instrument
software.
When using the AI Diver, mLAN Driver/mLAN Tools, or Yamaha Steinberg FW Driver, an audio connection is
completed automatically. The VSTi Setup on the MOTIF XS Editor VST is also done after installing MOTIF XS
Extension for Steinberg DAW.
When using the USB-MIDI Driver, you need an audio interface to connect to the MOTIF XS. After installation of the
audio device, select the audio ports in the VSTi Setup window within the MOTIF XS Editor VST.
n When using the MIDI connection via USB-MIDI Driver, you need to select the audio ports in the VSTi Setup window. If no audio port is
selected, or no audio device is installed to the computer, an error message appears. Make sure to set the audio ports in the VSTi Setup
window.
Windows Software Uninstall (removing the installed application)
Audio Connection to the Computer
MOTIF XS Editor VST Installation Guide 7
When starting the MOTIF XS Editor VST after the installation and controlling the MOTIF XS6/7/8
from your computer via a USB or IEEE1394 cable, the MOTIF XS6/7/8 does not operate correctly.
Did you install the latest Driver?..................................................................................................................... page 5
Is the USB or IEEE1394 cable used to connect the MOTIF XS6/7/8 to your computer connected correctly?
.................................................................................................................................................... MOTIF XS6/7/8 Owner’s Manual
If your computer has automatically activated any power-saving mode (such as suspended, sleep, standby) when
you make a USB or IEEE1394 connection, the computer may “freeze, or the driver may stop working. When using
a USB or IEEE1394 cable, disable any power-saving mode on the computer.
Confirm whether or not a proper USB or IEEE1394 cable is used.
If the USB or IEEE1394 cable is broken or damaged, have the USB or IEEE1394 cable replaced with a known
working one.
Do not use a USB or IEEE1394 hub for connecting multiple USB or IEEE1394 devices.
Screen redrawing is slow or stopped.
Does your computer satisfy the system requirements? ................................................................................. page 4
Is any other application or device driver running?
Quit the device driver or any unnecessary applications before operating the MOTIF XS Editor VST.
Troubleshooting
U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation
© 2007-2009 Yamaha Corporation
810MW-B0
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Yamaha V1 Omistajan opas

Tyyppi
Omistajan opas
Tämä käsikirja sopii myös