Yamaha CLP-525 Omistajan opas

Kategoria
Synthesizer
Tyyppi
Omistajan opas
FR
EN
Owner’s Manual
Mode d’emploi
CLP
-
525
For information on assembling the keyboard stand, refer to the instructions at the end of
this manual.
Pour obtenir des informations sur l'assemblage du support du clavier, reportez-vous aux
instructions à la fin de ce manuel.
EnglishFrançais
2
CLP-525 Owner’s Manual
1. IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the instruc-
tions contained in this manual, meets FCC requirements.
Modifications not expressly approved by Yamaha may
void your authority, granted by the FCC, to use the prod-
uct.
2. IMPORTANT: When connecting this product to accesso-
ries and/or another product use only high quality shielded
cables. Cable/s supplied with this product MUST be used.
Follow all installation instructions. Failure to follow instruc-
tions could void your FCC authorization to use this prod-
uct in the USA.
3. NOTE: This product has been tested and found to com-
ply with the requirements listed in FCC Regulations, Part
15 for Class “B” digital devices. Compliance with these
requirements provides a reasonable level of assurance
that your use of this product in a residential environment
will not result in harmful interference with other electronic
devices. This equipment generates/uses radio frequen-
cies and, if not installed and used according to the instruc-
tions found in the users manual, may cause interference
harmful to the operation of other electronic devices. Com-
pliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this prod-
uct is found to be the source of interference, which can be
determined by turning the unit “OFF” and “ON”, please try
to eliminate the problem by using one of the following
measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300 ohm ribbon
lead, change the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to dis-
tribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Corporation
of America, Electronic Service Division, 6600 Orangetho-
rpe Ave, Buena Park, CA90620
The above statements apply ONLY to those products dis-
tributed by Yamaha Corporation of America or its subsid-
iaries.
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)
FCC INFORMATION (U.S.A.)
* This applies only to products distributed by
YAMAHA CORPORATION OF AMERICA.
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY
PROCEDURE)
Responsible Party : Yamaha Corporation of America
Address : 6600 Orangethorpe Ave.,
Buena Park, Calif. 90620
Telephone : 714-522-9011
Type of Equipment : Digital Piano
Model Name : CLP-525
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received
including interference that may cause undesired opera-
tion.
See user manual instructions if interference to radio recep-
tion is suspected.
(FCC DoC)
OBSERVERA!
Apparaten kopplas inte ur växelströmskällan (nätet) så
länge som den ar ansluten till vägguttaget, även om själ-
va apparaten har stängts av.
ADVARSEL: Netspændingen til dette apparat er IKKE
afbrudt, sålænge netledningen sidder i en stikkontakt,
som er tændt — også selvom der er slukket på appara-
tets afbryder.
VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin
ei irroita koko laitetta verkosta.
(standby)
IMPORTANT NOTICE
FOR THE UNITED KINGDOM
Connecting the Plug and Cord
IMPORTANT. The wires in this mains lead are coloured in
accordance with the following code:
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this appa-
ratus may not correspond with the coloured makings iden-
tifying the terminals in your plug proceed as follows:
The wire which is coloured BLUE must be connected to
the terminal which is marked with the letter N or coloured
BLACK.
The wire which is coloured BROWN must be connected to
the terminal which is marked with the letter L or coloured
RED.
Making sure that neither core is connected to the earth ter-
minal of the three pin plug.
(2 wires)
This device complies with Part 15 of the FCC Rules. Oper-
ation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2)
this device must accept any interference received, includ-
ing interference that may cause undesired operation.
(fcc_sengen-C)
For AC Power Adaptor
For AC Power Adaptor
CAN ICES-3 (B)/NMB-3(B)
This applies only to products distributed by Yamaha Canada
Music Ltd.
Ceci ne s’applique qu’aux produits distribués par Yamaha
Canada Musique Ltée.
(can_b_01)
3
CLP-525 Owner’s Manual
SPECIAL MESSAGE SECTION
This product utilizes batteries or an external power supply
(adapter). DO NOT connect this product to any power supply
or adapter other than one described in the manual, on the
name plate, or specifically recommended by Yamaha.
WARNING:
Do not place this product in a position where
anyone could walk on, trip over, or roll anything over power or
connecting cords of any kind. The use of an extension cord is
not recommended! If you must use an extension cord, the
minimum wire size for a 25' cord (or less) is 18 AWG. NOTE:
The smaller the AWG number, the larger the current handling
capacity. For longer extension cords, consult a local
electrician.
This product should be used only with the components
supplied or; a cart, rack, or stand that is recommended by
Yamaha. If a cart, etc., is used, please observe all safety
markings and instructions that accompany the accessory
product.
SPECIFICATIONS SUBJECT TO CHANGE:
The information contained in this manual is believed to be
correct at the time of printing. However, Yamaha reserves the
right to change or modify any of the specifications without
notice or obligation to update existing units.
This product, either alone or in combination with an amplifier
and headphones or speaker/s, may be capable of producing
sound levels that could cause permanent hearing loss. DO
NOT operate for long periods of time at a high volume level or
at a level that is uncomfortable. If you experience any hearing
loss or ringing in the ears, you should consult an audiologist.
IMPORTANT: The louder the sound, the shorter the time period
before damage occurs.
Some Yamaha products may have benches and/or accessory
mounting fixtures that are either supplied with the product or
as optional accessories. Some of these items are designed to
be dealer assembled or installed. Please make sure that
benches are stable and any optional fixtures (where
applicable) are well secured BEFORE using.
Benches supplied by Yamaha are designed for seating only.
No other uses are recommended.
NOTICE:
Service charges incurred due to a lack of knowledge relating
to how a function or effect works (when the unit is operating as
designed) are not covered by the manufacturer’s warranty,
and are therefore the owners responsibility. Please study this
manual carefully and consult your dealer before requesting
service.
ENVIRONMENTAL ISSUES:
Yamaha strives to produce products that are both user safe
and environmentally friendly. We sincerely believe that our
products and the production methods used to produce them,
meet these goals. In keeping with both the letter and the spirit
of the law, we want you to be aware of the following:
Battery Notice:
This product MAY contain a small non-rechargeable battery
which (if applicable) is soldered in place. The average life
span of this type of battery is approximately five years. When
replacement becomes necessary, contact a qualified service
representative to perform the replacement.
This product may also use “household” type batteries. Some
of these may be rechargeable. Make sure that the battery
being charged is a rechargeable type and that the charger is
intended for the battery being charged.
When installing batteries, never mix old batteries with new ones,
and never mix different types of batteries. Batteries MUST be
installed correctly. Mismatches or incorrect installation may
result in overheating and battery case rupture.
Warning:
Do not attempt to disassemble, or incinerate any battery. Keep
all batteries away from children. Dispose of used batteries
promptly and as regulated by the laws in your area. Note:
Check with any retailer of household type batteries in your
area for battery disposal information.
Disposal Notice:
Should this product become damaged beyond repair, or for
some reason its useful life is considered to be at an end,
please observe all local, state, and federal regulations that
relate to the disposal of products that contain lead, batteries,
plastics, etc. If your dealer is unable to assist you, please
contact Yamaha directly.
NAME PLATE LOCATION:
The name plate is located on the bottom of the product. The
model number, serial number, power requirements, etc., are
located on this plate. You should record the model number,
serial number, and the date of purchase in the spaces
provided below and retain this manual as a permanent record
of your purchase.
Model
Serial No.
Purchase Date
PLEASE KEEP THIS MANUAL
92-BP (bottom)
4
CLP-525 Owner’s Manual
Table of Contents
PRECAUTIONS .................................... 5
About the Manuals ................................ 8
Included Accessories ............................. 8
Panel Controls and Terminals.............. 9
Basic Operations
Setting Up.............................................10
Key Cover ..................................................................10
Music Rest .................................................................10
Turning the Power On.............................................11
Auto Power Off.........................................................12
Using Headphones ...................................................12
Playing the Piano..................................13
Setting the Volume...................................................13
Intelligent Acoustic Control (IAC)........................13
Using the Pedals........................................................14
Using the Damper Resonance ................................14
Using the Metronome..............................................15
Changing the Touch Sensitivity .............................16
Advanced Operations
Playing Various Musical Instrument
Sounds (Voices)....................................17
Selecting a Voice.......................................................17
Listening to the Demo Songs ..................................18
Adding Variations to the Sound (Reverb) ............19
Transposing the Pitch in Semitones ......................20
Fine-tuning the Pitch ...............................................20
Layering Two Voices (Dual mode) ........................21
Playing Duo...............................................................22
Song Playback and Practice .................23
Listening to 50 Preset Songs....................................23
Practicing a One-Hand Part....................................24
Playing from the top of the bar including a rest or
blank...........................................................................24
Recording Your Performance .............25
Recording Your Performance ................................ 25
Changing the Initial Settings of the Recorded Song
....................................................................................26
Deleting Recorded Data ..........................................26
Backing up Data and Initializing the
Settings................................................. 27
Data Maintained When Power is Turned Off...... 27
Saving the User Song data to a computer.............27
Transferring SMF Files Between a Computer and
this Instrument......................................................... 27
Initializing the Settings............................................ 27
Appendix
Troubleshooting ..................................28
Keyboard Stand Assembly...................29
Specifications .......................................32
Index..................................................... 33
5
CLP-525 Owner’s Manual
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe and handy place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the
following:
Do not place the power cord near heat sources such as heaters or radiators. Also,
do not excessively bend or otherwise damage the cord, or place heavy objects on
it.
Only use the voltage specified as correct for the instrument. The required voltage
is printed on the name plate of the instrument.
Use the specified adaptor (page 32) only. Using the wrong adaptor can result in
damage to the instrument or overheating.
Check the electric plug periodically and remove any dirt or dust which may have
accumulated on it.
This instrument contains no user-serviceable parts. Do not open the instrument
or attempt to disassemble or modify the internal components in any way. If it
should appear to be malfunctioning, discontinue use immediately and have it
inspected by qualified Yamaha service personnel.
Do not expose the instrument to rain, use it near water or in damp or wet
conditions, place on it any containers (such as vases, bottles or glasses)
containing liquids which might spill into any openings. If any liquid such as
water seeps into the instrument, turn off the power immediately and unplug the
power cord from the AC outlet. Then have the instrument inspected by qualified
Yamaha service personnel.
Never insert or remove an electric plug with wet hands.
Do not put burning items, such as candles, on the unit. A burning item may fall
over and cause a fire.
When one of the following problems occur, immediately turn off the power switch
and disconnect the electric plug from the outlet. Then have the device inspected
by Yamaha service personnel.
- The power cord or plug becomes frayed or damaged.
- It emits unusual smells or smoke.
- Some object has been dropped into the instrument.
- There is a sudden loss of sound during use of the instrument.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:
Do not connect the instrument to an electrical outlet using a multiple-connector.
Doing so can result in lower sound quality, or possibly cause overheating in the
outlet.
When removing the electric plug from the instrument or an outlet, always hold
the plug itself and not the cord. Pulling by the cord can damage it.
Remove the electric plug from the outlet when the instrument is not to be used for
extended periods of time, or during electrical storms.
Read carefully the attached documentation explaining the assembly process.
Failure to assemble the instrument in the proper sequence might result in
damage to the instrument or even injury.
Do not place the instrument in an unstable position where it might accidentally
fall over.
When transporting or moving the instrument, always use two or more people.
Attempting to lift the instrument by yourself may damage your back, result in
other injury, or cause damage to the instrument itself.
Before moving the instrument, remove all connected cables, to prevent damage
to the cables or injury to anyone who might trip over them.
When setting up the product, make sure that the AC outlet you are using is easily
accessible. If some trouble or malfunction occurs, immediately turn off the power
switch and disconnect the plug from the outlet. Even when the power switch is
turned off, electricity is still flowing to the product at the minimum level. When
you are not using the product for a long time, make sure to unplug the power
cord from the wall AC outlet.
Use only the stand specified for the instrument. When attaching the stand or rack,
use the provided screws only. Failure to do so could cause damage to the internal
components or result in the instrument falling over.
Power supply/AC power adaptor
Do not open
Water warning
Fire warning
If you notice any abnormality
Power supply/AC power adaptor
Assembly
Location
DMI-5 1/2
6
CLP-525 Owner’s Manual
Before connecting the instrument to other electronic components, turn off the
power for all components. Before turning the power on or off for all components,
set all volume levels to minimum.
Be sure to set the volumes of all components at their minimum levels and
gradually raise the volume controls while playing the instrument to set the
desired listening level.
Do not insert a finger or hand in any gaps on the key cover or instrument. Also
take care that the key cover does not pinch your finger.
Never insert or drop paper, metallic, or other objects into the gaps on the key
cover, panel or keyboard. This could cause physical injury to you or others,
damage to the instrument or other property, or operational failure.
Do not rest your weight on, or place heavy objects on the instrument, and do not
use excessive force on the buttons, switches or connectors.
Do not use the instrument/device or headphones for a long period of time at a
high or uncomfortable volume level, since this can cause permanent hearing
loss. If you experience any hearing loss or ringing in the ears, consult a
physician.
Do not place the bench in an unstable position where it might accidentally fall
over.
Do not play carelessly with or stand on the bench. Using it as a tool or stepladder
or for any other purpose might result in accident or injury.
Only one person should sit on the bench at a time, in order to prevent the
possibility of accident or injury.
If the bench screws become loose due to extensive long-term use, tighten them
periodically using the included tool.
Keep special watch over any small children so that they don’t fall off the rear of
the bench. Since the bench does not have a backrest, unsupervised use may
result in accident or injury.
Always turn the power off when the instrument is not in use.
Even when the [ ] (Standby/On) switch is in standby status (power lamp is off), electricity is still flowing to the instrument at the minimum level.
When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.
NOTICE
To avoid the possibility of malfunction/damage to the product, damage to data, or damage to other property, follow the notices below.
Handling
Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the
instrument, TV, or radio may generate noise. When you use the instrument along with the application on your iPhone/iPad, we
recommend that you set “Airplane Mode” to “ON” on your iPhone/iPad in order to avoid noise caused by communication.
Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in
a car during the day) to prevent the possibility of panel disfiguration, damage to the internal components or unstable operation.
(Verified operating temperature range: 5° – 40°C, or 41° – 104°F.)
Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.
In the case of a model with a polished finish, bumping the surface of the instrument with metal, porcelain, or other hard objects can
cause the finish to crack or peel. Use caution.
Instrument/Bench Maintenance
To keep your Clavinova in optimum condition, we recommend that you periodically follow the maintenance points below.
When cleaning the instrument or bench, use a soft, dry or slightly damp cloth. Do not use paint thinners, solvents, cleaning fluids, or
chemical-impregnated wiping cloths. Otherwise, it may become discolored or degraded.
If you are using a model with a polished finish, gently remove dust and dirt with a soft cloth. Do not wipe too hard since small
particles of dirt can scratch the instrument's finish. To keep the surface polished, apply commercially available piano polisher to a
soft cloth and wipe the instruments surface with it. Then, polish it with a separate cloth. Before using any piano polisher, make sure
to read the instructions for proper usage.
During extreme changes in temperature or humidity, condensation may occur and water may collect on the surface of the
instrument. If water is left, the wooden parts may absorb the water and be damaged. Make sure to wipe any water off immediately
with a soft cloth.
As with an acoustic piano, pedals may become tarnished across the ages. When this occurs, polish the pedal with a compound
designed for piano pedals. Before using the compound, make sure to read the instructions for proper usage.
Saving data
Saved data may be lost due to malfunction or incorrect operation. Save important data to an external device such as a computer (see
the online manual, Computer-related Operations (page 8)).
Connections
Handling caution
Using the bench (If included)
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
DMI-5 2/2
7
CLP-525 Owner’s Manual
Information
About copyrights
Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited
except for your personal use.
This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which
it has license to use others' copyrights. Such copyrighted materials include, without limitation, all computer software, style files,
MIDI files, WAVE data, musical scores and sound recordings. Any unauthorized use of such programs and contents outside of
personal use is not permitted under relevant laws. Any violation of copyright has legal consequences. DON’T MAKE, DISTRIBUTE
OR USE ILLEGAL COPIES.
About functions/data bundled with the instrument
Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original.
About this manual
The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat different from those on
your instrument.
The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.
Tunin g
Unlike an acoustic piano, this instrument does not need to be tuned by an expert (although the pitch can be user-adjusted to match
other instruments). This is because the pitch of digital instruments is always maintained perfectly.
About audio files
This instrument does not feature audio file playback or audio recording. In addition, audio signals created via your keyboard
performance are not transmitted to your computer or iPad/iPhone, even if one of them is connected to the [USB TO HOST]
terminal of the instrument.
8
CLP-525 Owner’s Manual
Thank you for choosing the Yamaha Clavinova.
In order to make the most of the performance potential and features of the instrument,
please read the manuals thoroughly, and keep them in a handy place for later reference.
About the Manuals
This instrument has the following manuals.
Included Manuals
Owner’s Manual (this book)
Explains how to use the instrument.
Quick Operation Guide (separate
sheet)
Shows in chart form the functions assigned to the
buttons and the keyboard for quick
understanding.
Online Manuals (PDF)
Computer-related Operations
Includes instructions on connecting this
instrument to a computer, and operations related
to transferring song data.
MIDI Reference
Contains the MIDI Data Format and MIDI
Implementation chart, as well as descriptions on
MIDI functions such as MIDI channel and Local
Control settings.
MIDI Basics (only in English, French
and German)
Contains basic explanations about MIDI.
To obtain these manuals, access the Yamaha
Downloads website, select your country, enter
“CLP-525” in the Model Name box, then click
[SEARCH].
Included Accessories
•Owners Manual (this book)
Quick Operation Guide (separate sheet)
“50 Greats for the Piano” (music book)
Online Member Product Registration
*1
•AC power adaptor
*2
•Power cord
*2
•Bench
*2
*1 You will need the PRODUCT ID on the sheet in order
to fill out the User Registration form.
*2 May not be included depending on your particular
area. Please check with your Yamaha dealer.
Yam ah a Do wn l o ad s
http://download.yamaha.com/
9
CLP-525 Owner’s Manual
Panel Controls and Terminals
[ ] (Standby/On) switch......................... page 11
For turning the power on or setting to standby.
[MASTER VOLUME] knob ..................... page 13
For adjusting the volume of the entire sound.
[DEMO/SONG] button..................... pages 18, 23
For playing the Demo Songs and the Preset Songs.
[PIANO/VOICE] button............. pages 17, 19, 21
For selecting a single Voice, two Voices for layering or
a Reverb Type.
[METRONOME] button .......................... page 15
For starting or stopping the metronome.
[+R], [–L] buttons ....................... pages 17, 20, 24
In general, these are for selecting the next or
previous Voice.
During Song playback, these are for selecting the
next or previous Song, and (while holding down
[PLAY]) turning on/off the right-hand and left-
hand Parts individually.
During Metronome playback, these are for
increasing or decreasing the Tempo.
[REC] button............................................ page 25
For recording your keyboard performance.
[PLAY] button.......................................... page 25
For playing back the recorded performance.
[FUNCTION] .......................................... page 20
Simultaneously holding these two buttons and
pressing the specified key sets will set the MIDI or
Transpose parameters.
[PHONES] jacks....................................... page 12
For connecting a set of standard stereo headphones.
[USB TO HOST] terminal
For connecting to a computer. For details, refer to the
Computer-related Operations” on the website
(page 8).
NOTICE
Use an AB type USB cable of less than 3 meters.
USB 3.0 cables cannot be used.
[TO PEDAL] jack ..................................... page 30
For connecting the pedal cord.
DC IN jack................................................ page 11
For connecting the power adaptor.
Pedals ....................................................... page 14
For controlling expression and sustain, just as on an
acoustic piano.
Rear
(Keyboard side)
Rear
(Keyboard side)
Rear
(Keyboard side)
10
CLP-525 Owner’s Manual
Basic Operations
Setting Up
To open the key cover:
Lift the cover slightly, then push and slide it to the end.
To close the key cover:
Slide the cover toward you and gently lower the cover over
the keys.
CAUTION
Hold the cover with both hands when opening or closing it. Do not
release it until it is fully opened or closed. Be careful to avoid
catching fingers (yours or others, especially children’s) between the
cover and the main unit.
Do not place objects, such as a piece of metal or paper, on top of the
key cover. Small objects placed on the key cover may fall inside the
unit when the cover is opened and may be nearly impossible to
remove. This could cause electric shock, short circuit, fire or other
serious damage to the instrument.
To raise the music rest:
1. Pull the music rest up and toward yourself as
far as it will go.
2. Flip down the two metal supports at the left
and right on the rear of the music rest.
3. Lower the music rest so that it rests on the
metal supports.
To lower the music rest:
1. Pull the music rest toward yourself as far as it
will go.
2. Raise the two metal supports (at the rear of
the music rest).
3. Gently lower the music rest backward until it
is all the way down.
CAUTION
Do not try to use the music rest in a half-raised position. When lowering the music rest, do not release your hands from the music
rest until it is all the way down.
Key Cover
Music Rest
CAUTION
Be careful to avoid catching
your fingers when opening
or closing the cover.
1
3
2
3
1
2
Setting Up
11
CLP-525 Owner’s Manual
1. Connect the plugs of the AC power adaptor in the order
shown in the illustration.
WARNING
Use the specified adaptor (page 32) only. The use of other adaptors may result in irreparable
damage to both the adaptor and the instrument.
The AC power adaptor is designed for indoor use only. Do not use in any wet environments.
CAUTION
Remove the AC plug from the AC outlet when the instrument is not to be used for extended
periods of time, or during electrical storms.
NOTE
Follow this procedure in reverse order when disconnecting the power adaptor.
2. Press the [ ] (Standby/On) switch to turn the power on.
Power indicator
If you close the key cover without turning the power to standby, the power
indicator remains lit, indicating that the power is still on.
When you’re ready to turn the power to standby, press the [ ](Standby/On)
switch again for a second. The power indicator turns off.
CAUTION
Even when the [ ] (Standby/On) switch is in the standby status, electricity is still flowing to the
instrument at a minimum level. When not using the instrument for an extended period of time, be
sure to unplug the power cord from the wall AC outlet.
Turning the Power On
1-1
1-2
1-3
Power cord
AC outlet
AC power
adaptor
DC IN jack (page 9)
The shape of the plug and outlet
differ depending on locale.
Power indicator
[ ] (Standby/On) switch
Setting Up
12
CLP-525 Owner’s Manual
To prevent unnecessary power consumption, this instrument features an Auto
Power Off function that automatically turns the power off if the instrument is
not operated for approximately 30 minutes. If you do not want to use the Auto
Power Off function, disable the function as described below. The setting
(disabled or enabled) is retained even if the power is turned off.
Disabling Auto Power Off
Turn the power of the instrument off. Then, while holding
down the lowest key, press the [ ] (Standby/On) switch to
turn on the power again so that the [REC] indicator flashes
three times, indicating that the Auto Power Off function
has been disabled.
You can also disable the Auto Power Off function without
turning the power off, by simultaneously holding down
[DEMO/SONG] and [PIANO/VOICE] and pressing the
A 5 key.
Re-enabling Auto Power Off
To enable the Auto Power Off function again,
simultaneously hold down [DEMO/SONG] and [PIANO/
VOICE] and press the A5 key.
Since this instrument is equipped with two [PHONES]
jacks, you can connect two sets of standard stereo
headphones. If you are using only one set of headphones,
insert a plug into either jack, which automatically shuts off
the speakers.
CAUTION
Do not use headphones at a high volume for an extended period of
time; doing so may cause hearing loss.
Using the headphone hanger
You can hang the headphones on this instrument. Refer to
“Keyboard Stand Assembly” on page 29 for instructions on
installing the headphone hanger.
NOTICE
Do not hang anything other than the headphones on the hanger.
Doing so may damage this instrument or the hanger.
Auto Power Off
Default setting:
Enable
Lowest key
Highest keyA 5
Highest keyA5
Using Headphones
Standard stereo phone plug
Bottom surface
13
CLP-525 Owner’s Manual
Playing the Piano
When you start playing, use the [MASTER VOLUME] knob to adjust the volume of the entire keyboard
sound.
CAUTION
Do not use this instrument at a high volume level for a long period of time, or your hearing may be damaged.
With this function, the sound quality of this instrument is automatically adjusted
and controlled according to the overall volume. Even when the volume is low,
this lets you hear both low sounds and high sounds clearly.
To turn on IAC:
While holding down [PIANO/VOICE],
press the F 0 key.
To turn off IAC:
While holding down [PIANO/VOICE],
press the F0 key.
To adjust IAC Depth:
While holding down [PIANO/VOICE],
press one of the A-1 – D 0 keys.
The higher the value, the more clearly that low and high sounds are heard at
lower volume levels.
Setting the Volume
Intelligent Acoustic Control (IAC)
Level decreases. Level increases.
Default setting:
On
F 0Lowest key
F0Lowest key
C0: depth 0
(Standard setting)
Lowest key
A-1: depth -3 D0: depth +3
Setting range:
A-1 (-3) – D 0 (+3)
Default setting:
C0 (0)
Playing the Piano
14
CLP-525 Owner’s Manual
Damper Pedal (Right)
Pressing this pedal will sustain notes longer.
Releasing this pedal immediately stops (damps)
any sustained notes. This pedal also features a
“half-pedal” function that creates partial sustain
effects, depending on how far down you press the
pedal.
Sostenuto Pedal (Center)
Pressing this pedal while holding the notes will
sustain the pressed notes (as if the Damper Pedal
had been pressed), but all subsequently played
notes will not be sustained. This makes it possible
to sustain a chord or single low note, for example,
while the other notes are played “staccato.
Soft Pedal (Left)
Pressing this pedal will reduce the volume and slightly change the timbre of the
notes. The notes played before this pedal is pressed are not affected. When you
select the Jazz Organ Voice, pressing the left pedal switches between fast/slow
rotation of the rotary speaker (page 17).
The Damper Resonance effect simulates the sustain sound of the damper pedal on a grand piano, as if you
were pressing the damper pedal and playing the keyboard. This effect is applied to the entire sound of the
instrument.
To turn on the Damper Resonance:
While holding [PIANO/VOICE], press the G2 key.
To turn off the Damper Resonance:
While holding [PIANO/VOICE], press the G2 key.
Using the Pedals
When you press the damper
pedal here, this note and the
notes you play before you release
the pedal sustain longer.
When you press the sostenuto
pedal here while holding the
note, the note will sustain as
long as you hold the pedal.
NOTE
If the damper pedal doesn’t
work, make sure that the pedal
cord is properly plugged into
the main unit (page 30).
Half-pedal function
This function allows you to vary
the sustain length depending
on how far the pedal is
pressed. The farther down you
press the pedal, the more the
sound sustains. For example, if
you press the damper pedal
and all notes you are playing
sound a bit murky and loud
with too much sustain, you can
release the pedal half way or
higher to decrease the sustain
(murkiness).
NOTE
While the sostenuto pedal is
held, the organ and strings
Voices sound continuously
without decay after the notes
have been released.
Using the Damper Resonance
Default setting:
On
Lowest key G2
(Off)
G2
(On)
Playing the Piano
15
CLP-525 Owner’s Manual
The metronome feature is convenient for practicing with an accurate tempo.
1. Press [METRONOME] to start the Metronome.
2. Press [METRONOME] to stop the Metronome.
Selecting a Beat
While holding down [METRONOME], press one of the C3 – F3 keys.
Adjusting the Tempo
The Metronome tempo can be set from 5 to 280 beats per minute.
To increase or decrease the value by 1:
While the metronome is playing, press [+R] to increase or [–L] to decrease.
Alternatively, press and hold down [METRONOME], and press the C5 key to
increase or B4 key to decrease.
To increase or decrease the value by 10:
While holding down [METRONOME], press the D5 key to increase or the A 4 key
to decrease.
To specify a three-digit value:
While holding down [METRONOME], press the relevant C4 – A4 keys one by one
in order. For example to specify “95,” press the C4 (0), A4 (9) and F4 (5) keys in
order.
Resetting the value to the default (120)
While holding down [METRONOME], press the [+R] and [–L] simultaneously,
or press the C5 (default) key.
Adjusting the Volume
While holding down [METRONOME], press one of the keys between C1 and G2
to set the volume of the metronome. Pressing a higher key results in higher
volume, while pressing a lower key results in lower volume.
Using the Metronome
24 7
1356
9
11
8
10
12
14 16 19
15 17 18 2013
024579
8631
C 3
C3
Highest key
D 3
D3 E3 F3
A 4
C4
C 5
F4 A4 C5 D5B4Lowest key C1 G2
Adjusting the
Metronome Volume
Selecting
a Beat
Adjusting
the Tempo
Default setting:
0 (C3)
Key Beat
C3 0
C32
D3 3
D34
E3 5
F3 6
Setting range:
C1 (1) – G2 (20)
Default setting:
D2 (15)
Playing the Piano
16
CLP-525 Owner’s Manual
You can specify the Touch Sensitivity (how the sound responds to the way you
play the keys).
While holding down [PIANO/VOICE], press one of the A6 – C7 keys.
Changing the Touch Sensitivity
NOTE
This setting is disabled with
some Voices, such as an
organ sound.
Default setting:
B6 (Medium)
Key
Touch
Sensitivity
Description
A6 Fixed
The volume level does not change at all regardless of whether you
play the keyboard soft or hard.
A 6Soft
The volume level does not change much when you play the
keyboard soft or hard.
B6 Medium This is the standard piano touch response.
C7 Hard
The volume level changes very widely from pianissimo to fortissimo
to facilitate dynamic and dramatic expression. You have to hit the
keys hard to produce a loud sound.
A6 Highest key (C7)
B6
A 6
17
CLP-525 Owner’s Manual
Advanced Operations
Playing Various Musical Instrument Sounds (Voices)
To select “Grand Piano 1”:
Simply press [PIANO/VOICE].
To select another Voice:
After pressing [PIANO/VOICE], press [+R] or [L] to select the next or previous
Voi ce.
To select a specific Voice:
While holding down [PIANO/VOICE], press one of the C1 – A1 keys. For details
on which Voice is assigned to each key, see the list below.
Voice List
Selecting a Voice
NOTE
To hear the characteristics of
the Voices, play back the
Demo Songs (page 18).
Key Voice Name Voice description
C1 Grand Piano 1
This sound was sampled from a full concert grand piano. It uses
different samples depending on the strength of your playing and
produces smoother tonal changes. Suitable not only for classical
compositions but also for piano pieces of any style.
C1 Grand Piano 2 Warm and soft piano sound. Good for playing ballads.
D1 Grand Piano 3
Spacious and clear piano with bright reverb. Good for popular
music.
D1 E.Piano 1
An electronic piano sound created by FM synthesis. Good for
standard popular music.
E1 E.Piano 2
The sound of an electric piano using hammer-struck metallic
“tines.” Soft tone when played lightly, and an aggressive tone
when played hard.
F1 Harpsichord
The definitive instrument for baroque music. Since harpsichord
uses plucked strings, there is no touch response. There is,
however, a characteristic additional sound when the keys are
released.
F1 Vibraphone
Vibraphone played with relatively soft mallets. The tone becomes
more metallic the harder you play.
G1 Pipe Organ
This is a typical pipe organ sound (8 feet + 4 feet + 2 feet). Good
for sacred music from the Baroque period.
G1 Jazz Organ
The sound of a “tonewheel” type electric organ. Often heard in
jazz and rock music. The rotary speed of the rotary speaker
effect can be switched by using the left pedal.
A1 Strings
Stereo-sampled, large-scale strings ensemble with realistic
reverb. Try combining this Voice with piano in the Dual mode.
C 1D1F1G1
C1 D1 E1 F1 G1 A1Lowest key
Playing Various Musical Instrument Sounds (Voices)
18
CLP-525 Owner’s Manual
Special individual Demo Songs are provided for all of the instrument Voices.
1. Press [DEMO/SONG] to start playback.
The [PLAY] lamp flashes, and the Demo Song for the current Voice starts.
Starting with the selected song, the playback of the Demo Songs will continue.
After the last demo song, the sequence then returns to the first Demo Song and
repeats until you stop it.
To change the Demo Song during playback:
Press the [+R] or [–L] to change to the next or previous Demo Song.
To change to a specific Demo Song, press and hold down the [DEMO/SONG], then
press one of the C1 – A1 keys.
2. Press [DEMO/SONG] or [PLAY] to stop playback.
The [PLAY] lamp turns off.
Demo Song List
The Demo Songs excluding original Songs are short rearranged excerpts from the original
compositions. The original Demo Songs are Yamaha originals (©2013 Yamaha Corporation).
Listening to the Demo Songs
NOTE
If you want to change the
playback tempo, see page 15.
Key Voice Name Title Composer
C1 Grand Piano 1 Bargarolle op. 60 F. F. Chopin
C1 Grand Piano 2
Von fremden Landern und Menchen,
Kinderszenen op. 15-1
R. Schumann
D1 Grand Piano 3 Original Original
D1 E.Piano 1 Original Original
E1 E.Piano 2 Original Original
F1 Harpsichord
Concerto a cembalo obbligato, 2 violini, viola e
continuo No. 7, BWV. 1058
J. S. Bach
F1 Vibraphone Original Original
G1 Pipe Organ Herr Christ, der ein’ge Gottes-Sohn, BWV. 601 J. S. Bach
G1 Jazz Organ Original Original
A1 Strings Original Original
Lowest key C1 F1 A1
Playing Various Musical Instrument Sounds (Voices)
19
CLP-525 Owner’s Manual
This instrument features several Reverb Types that add extra depth and expression to the sound to create a
realistic acoustic ambience. The appropriate Reverb Type and Depth are called up automatically when you
select each of the Voices and Songs. This is why the Reverb Type need not be selected; however, you can
change it if desired.
To select a Reverb Type:
While holding down [PIANO/VOICE], press one of the C2 – E2 keys.
Reverb Type List
To adjust Reverb Depth:
While holding down [PIANO/VOICE], press one of the C3 – G4 keys. The
Depth value increases as you press higher keys.
While holding down [PIANO/VOICE], press the A4 key to set the Reverb Depth
to the most suitable value for the current Voice.
Adding Variations to the Sound (Reverb)
Reverb in Dual Mode
An optimum reverb type for the
combination of Voices is
assigned automatically.
Lowest key
C3: depth 0
G4: depth 20
A4
The depth value increases as you
press higher keys.
C2D2
C2 D2 E2
Selecting a
Reverb Type
Adjusting
Reverb Depth
Highest key
Key Reverb Type Description
C2 Recital Hall
Simulates the clear reverb sound you would hear in a medium-
sized concert hall for piano recitals.
C2 Concert Hall
Simulates the gorgeous reverb sound you would hear in a large
concert hall for orchestral performances.
D2 Chamber
Suitable for playing chamber music; simulates the intimate
reverb sound you would hear in a spacious room, such as for
classical music recitals.
D2Club
Simulates the vivid reverb sound you would hear in a live music
venue or a jazz club.
E2 Off No effect is applied.
Reverb Depth range:
0 (no effect) – 20 (maximum
depth)
Playing Various Musical Instrument Sounds (Voices)
20
CLP-525 Owner’s Manual
You can shift the pitch of the entire keyboard up or down in semitones in order to facilitate playing in
difficult key signatures, or to easily match the pitch of the keyboard to the range of a singer or other
instruments. For example, if “+5” is selected, playing key C produces pitch F, letting you play a song of F
major as though it were in C major.
To transpose the pitch down:
While holding down [DEMO/SONG] and [PIANO/VOICE], press a key
between F 2 (-6) and B2 (-1).
To transpose the pitch up:
While holding down [DEMO/SONG] and [PIANO/VOICE], press a key
between C 3 (+1) and F 3 (+6).
To restore the normal pitch:
While holding down [DEMO/SONG] and [PIANO/VOICE], press the C3 key.
You can fine-tune the pitch of the entire instrument in about 0.2 Hz steps. This lets you match the keyboard
pitch finely to that of other instruments or CD music.
To tune up (in about 0.2 Hz steps):
Press and hold down the [DEMO/SONG] and
[PIANO/VOICE] simultaneously, and press [+R].
To tune down (in about 0.2 Hz steps):
Press and hold down the [DEMO/SONG] and
[PIANO/VOICE] simultaneously, and press [–L].
To set the pitch to 442.0 Hz:
Press and hold down the [DEMO/
SONG] and [PIANO/VOICE]
simultaneously, and press the A0 key.
To restore default pitch:
Press and hold down the [DEMO/SONG]
and [PIANO/VOICE] simultaneously, and
press [+R] and [–L] simultaneously.
Transposing the Pitch in Semitones
-5 -3 -1 0 +2 +4 +5
-6 -4 -2 +1
+3 +6
F2C3
Lowest key
F3
Transpose down Transpose up
Normal pitch
Fine-tuning the Pitch
Hz (Hertz)
This unit of measurement
refers to the frequency of a
sound and represents the
number of times a sound wave
vibrates in a second.
Setting range:
414.8 – 466.8 Hz
Default setting:
A3 = 440.0 Hz
A0
Lowest key
1 / 1

Yamaha CLP-525 Omistajan opas

Kategoria
Synthesizer
Tyyppi
Omistajan opas