Yamaha MOX6 Omistajan opas

Merkki: Yamaha

Malli: MOX6

Luokka: Software

Tyyppi: Omistajan opas

Tämä ohje sopii myös

MOX8

MOX6/MOX8 Editor VST Owner’s Manual 1

Contents

What is the MOX6/MOX8 Editor VST?.....................................2

Data Structure of the MOX6/MOX8 Editor VST.......................3

Starting the MOX6/MOX8 Editor VST ......................................4

An Example of MOX6/MOX8 Editor VST in Use .....................7

MOX6/MOX8 Editor VST Window...........................................13

Basic Operations....................................................................33

Menu ........................................................................................35

Tips ..........................................................................................51

• Recording to Cubase MIDI tracks with the MOX6/MOX8 Editor VST

• Recording/Editing Arpeggio playback as MIDI data on Cubase

Troubleshooting .....................................................................57

• Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for your personal

use.

• The software and this owner’s manual are exclusive copyrights of Yamaha Corporation.

• Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written

consent of the manufacturer.

• Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held

responsible for the results of the use of this manual and the software.

• The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may appear somewhat different from the

screens which appear on your computer.

• Windows is the registered trademarks of Microsoft

Corporation.

• Apple, Mac and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.

• Steinberg and Cubase are the registered trademarks of Steinberg Media Technologies GmbH.

• The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their respective

companies.

• Click on the blue-colored text to jump to the related item in this manual.

This owner’s manual assumes that you are already familiar with basic Windows/Mac operations. If you are not,

please refer to the owner’s manual which came with your Windows/Mac software before using the MOX6/MOX8

Editor VST.

For information about hardware requirements, the interconnection of devices and the installation of the MOX6/MOX8

Editor VST software, refer to the separate Installation Manual as well as the Owner’s Manual for the respective MIDI

device.

MOX6/MOX8 Editor VST

Owner’s Manual

MOX6/MOX8 Editor VST

Owner’s Manual

What is the MOX6/MOX8 Editor VST?

MOX6/MOX8 Editor VST Owner’s Manual

What is the MOX6/MOX8 Editor VST?

MOX6/MOX8 Editor VST is a convenient tool which lets you edit and save the various parameters of your

MOX6/MOX8 tone generator. These include Voice and Mixing parameters (edited in the Voice or Mixing

mode of the MOX6/MOX8) such as Volume, Pan, EG, and Cutoff and other settings. Thanks to its easy-to-

understand graphical interface, you can edit various parameters of the MOX6/MOX8 right from your

computer — using the mouse to adjust the virtual knobs, sliders, and buttons and entering values from the

computer keyboard. Finally, all the changes you have made can be saved to your computer or transmitted to

the MOX6/MOX8 instrument.

The MOX6/MOX8 Editor VST, based on the “VST3 technology” by Steinberg, works as a VST3 plug-in with

the Cubase series (version 5.5 or later Cubase 5/Cubase Studio 5, and version 5.1.1 or later Cubase

Essential 5/Cubase AI 5). The MOX6/MOX8 Editor VST also works as the same way as other VST instrument

software, allowing you to save the edited settings of the MOX6/MOX8, or use them for another project. In

addition, you can handle the MOX6/MOX8 Voices in the Media Bay window in Cubase series when using the

MOX6/MOX8 Editor VST with Cubase series, allowing you to search for, listen, and load the MOX6/MOX8

Voices within Media Bay in Cubase series. The MOX6/MOX8 Editor VST provides a comprehensive and

seamless music production environment — making the use of hardware and software both easier and much

more efficient.

The MOX6/MOX8 Editor VST lets you adjust the hue as desired (page 6). This manual uses example screen

shots having the most universal color visibility, allowing the manual to be easily viewed by many people

having different types of color recognition.

Default Adjusted to universal hue

Data Structure of the MOX6/MOX8 Editor VST

MOX6/MOX8 Editor VST Owner’s Manual

Data Structure of the MOX6/MOX8 Editor VST

The MOX6/MOX8 Editor VST lets you create the following data and save them as a single file (extension: X4E).

• Current Global data (latest status of edited global parameters)

• Current data in the Voice mode (latest status of edited Voice)

• Current data in the Song/Pattern mode (consisting of Mixing setup, latest status of edited Voice and 16 Mixing Voices)

• User Voice data (consisting of three Normal Voice Banks and one Drum Voice Bank)

Current settings includes the latest settings of the Common and Element parameters for the Voice last assigned to

each of Parts 1 – 16, as well as Mixing parameter settings such as Voice assignment, pan, volume and effect for

each Part. Among the Voice Banks, only the Mixing Voice Bank data belongs to the Current settings. The MOX6/

MOX8 Editor VST lets you edit parameters (including Element parameters) of the Voice assigned to each Part and

save the latest edit status as a file without storing it as a User Voice or a Mixing Voice. This means that you can

easily recall the latest status of the previous edit simply by opening the file.

n The MOX6/MOX8 Editor VST handles the Global data which includes some of the parameters shown on the “G” row in

the Mixer section and all the parameters in the Global Settings of the Parameter Category section (pages 19 and 27).

The diagram illustrated below indicates the structure of the data created via the MOX6/MOX8 Editor VST, the

structure of the data stored in the internal memory of the MOX6/MOX8 instrument and the relationship

between those two types of data.

*1 When the MOX6/MOX8 instrument is connected to the computer properly with the ONLINE status, editing a parameter on the MOX6/MOX8 Editor VST affects the same parameter on the MOX6/

MOX8 itself, and vice versa.

*2 The Store Voice operation on the Editor will store the Voice data to the memory of the MOX6/MOX8 instrument as well as the memory of the Editor.

*3 The Store Global operation and Store Mixing operation will store the data only to the memory of the MOX6/MOX8 instrument.

MOX6/MOX8 Editor VST (VST3 Plug-in)

Current Global data

Current data in the Voice mode

Current data in the Song or

Pattern mode

• Mixing data

• Multi Common data

Part Voice data

(16 Voices)

Mixing Voice data

(16 Voices)

Store Voice

(page 46)

Store Voice

(page 46)

User Voice data

• Normal User 1 (128 Voices)

• Normal User 2 (128 Voices)

• Normal User 3 (128 Voices)

• Drum User (32 Voices)

Editor file

(Extension: .X4E)

Data sync

Current Global data

Current data in the Voice mode

Current data in the Song or

Pattern mode

• Mixing data

• Multi Common data

Global data

User Voice data

• Normal User 1 (128 Voices)

• Normal User 2 (128 Voices)

• Normal User 3 (128 Voices)

• Drum User (32 Voices)

Part Voice data

(16 Voices)

Mixing data

• Multi Common data

Mixing Voice data

(16 Voices)

Store Voice

(page 46)

Store Voice

(page 46)

Store Voice

(page 46)

Store Mixing

(page 47)

Store Global

(page 46)

MOX6/MOX8 instrument

Store Voice

(page 46)

Project file of the DAW application (computer)

Starting the MOX6/MOX8 Editor VST

MOX6/MOX8 Editor VST Owner’s Manual

Starting the MOX6/MOX8 Editor VST

Install the Yamaha Steinberg USB Driver and MOX6/MOX8 Editor VST by following the respective Installation

Guides. After making the required connection and setting the MIDI IN/OUT parameter to “USB” in the Utility

mode, follow the instructions below to start the MOX6/MOX8 Editor VST.

This example describes the operation steps for Cubase with the MOX6/MOX8 instrument connected to a

computer via an USB cable.

n For details about connection between the MOX6/MOX8 and a computer, refer to the Owner’s Manual of the MOX6/

MOX8.

n On the MOX6/MOX8, press the [UTILITY] to enter the Utility mode, then press the [F6] MIDI followed by the [SF4]

OTHER. On this display, set the MIDI In/Out parameter to “USB”, then press the [STORE] button to store this Utility

setting.

1. Open the VST Instrument window via [Devices]  [VST Instruments] in the Cubase

series menu.

2. Click the Instrument Slot in the VST Instrument Rack, then select [External]  [MOX6/

MOX8 VST].

3. When the dialog box asking “Do you want to create a MIDI track assigned to plug-in

“MOX6/MOX8 VST”?” appears, click [Create].

A MIDI track will be created and the MOX6/MOX8 Editor VST window will appear.

Starting the MOX6/MOX8 Editor VST

MOX6/MOX8 Editor VST Owner’s Manual

4. Click the Output Setup button at the right side of the Edit button ( ) in the VST

Instrument Rack, then select [Activate All Outputs].

After this operation, the MOX6/MOX8 1 – 2 Busses appear in the project window of the Cubase series.

5. Call up the Editor Setup window in the MOX6/MOX8 Editor VST via [File]  [Editor

Setup].

6. Select “MOX6/MOX8” at the [USB Device] column.

7. Click [OK] button at the bottom.

8. Call up the VSTi Setup window in the MOX6/MOX8 Editor VST via [File]  [VSTi Setup].

9. Click the [Auto] button then all the audio ports are assigned automatically.

10. Click the [OK] button at the bottom.

11. If the MOX6/MOX8 Editor VST is “OFFLINE,” click the [ONLINE/OFFLINE] button to go

“ONLINE.”

12. In Quick Setup, select the desired one.

n Step 5 through 10 are required when starting MOX6/MOX8 Editor VST for the first time. These steps are

saved in the editor and do not need to be repeated each time it is started.

n The MOX6/MOX8 Editor can be started also from Media Bay via the following steps. From the “Media” menu

of Cubase series, select “MediaBay” to call up the MediaBay window. Select a Voice from the MediaBay,

right-click to call up “Property,” then select “Create Track.” Press the “Edit Instrument” button on the created

Instrument track to start the MOX6/MOX8 Editor VST.

Output Setup button

Starting the MOX6/MOX8 Editor VST

MOX6/MOX8 Editor VST Owner’s Manual

Adjusting the hue of the display

The MOX6/MOX8 Editor VST lets you adjust the hue as desired.

1. At the left bottom of the Editor window, click the triangle button to call up the slider.

Click the triangle button again to close the slider.

2. Drag or click the slider to adjust the hue.

In Windows, to reset the hue to its default, simultaneously hold down the <Ctrl> key and click on the

slider.

On the Mac, to reset the hue to its default, simultaneously hold down the <Command> key and click

on the slider.

For details about slider operation, refer to page 34.

An Example of MOX6/MOX8 Editor VST in Use: Editing in the Voice mode

MOX6/MOX8 Editor VST Owner’s Manual

An Example of MOX6/MOX8 Editor VST in Use

There is no single way to use the many components in the MOX6/MOX8 Editor VST. Your editing needs and

preferences may differ; however, the following example gives you a simple step-by-step guide in how to use

the MOX6/MOX8 Editor VST. As an example, this section explains how to edit a Voice in the Voice mode, edit

a Mixing program in the Song mode, then store the edited data to the memory of the MOX6/MOX8 instrument

and save the final results of your editing to a file.

Editing in the Voice mode

n If the [Song] or [Pattern] indication (at the top left of the display) is on, perform the instructions below from step 1. If the

[Voice] indication is on, perform the instructions below from step 2.

1. Change the mode to the Voice mode by clicking the [Voice] indication (at the top left of

the display).

If the [ONLINE]/[OFFLINE] indication is set to [ONLINE] before changing the mode, the Auto Sync

window will be called up automatically when this step is executed. As step 2 is thus unnecessary, you

should proceed to step 3.

2. Click the [OFFLINE] to call up the Auto Sync window if the [ONLINE]/[OFFLINE]

indication is set to [OFFLINE].

3. On the Auto Sync window, set communication-related parameters such as Input Port,

Output Port and Device Number in the Data Port section, then set the direction of Data

Auto Synchronization (Global, Current and Voice) in the Auto Sync Setting section.

When you want to use the settings on the MOX6/MOX8 itself as starting data for editing, set the boxes of

Global, Current and Voice in the Auto Sync Setting to on so that the data flows from the instrument to the

computer. To use the settings on the MOX6/MOX8 Editor VST as starting data, set both Global, Current

and Voice to the opposite, so that the arrow indicates data flow from the computer to the keyboard. For

details, see page 37.

NOTICE

• Keep in mind that when you set Global, Current and Voice to On, enable data sync from the computer to the MOX6/

MOX8 (instrument), and then click the [Start] button at the bottom, this operation transmits these types of data

currently on the Editor to the MOX6/MOX8 itself, automatically overwriting and erasing all the corresponding data

already existing on memory of the MOX6/MOX8 instrument. When you want to use the settings on the MOX6/MOX8

itself as starting data for editing, set the boxes of Global, Current and Voice in the Auto Sync Setting to on so that

the data flows from the instrument to the computer.

• Make sure to set the desired data transfer direction in order to avoid data loss.

• Any data which was overwritten and lost accidentally cannot be recovered.

An Example of MOX6/MOX8 Editor VST in Use: Editing in the Voice mode

MOX6/MOX8 Editor VST Owner’s Manual

4. From the Auto Sync window, click [Start] at the bottom.

The data synchronization will be started if the Port settings are correct. As soon as data synchronization

is completed, the Auto Sync window is closed, then the OFFLINE indication is changed to ONLINE

indication automatically. In this ONLINE status, editing a parameter on the MOX6/MOX8 Editor VST

affects the same parameter on the MOX6/MOX8 itself, and vice versa.

For more information, refer to “ONLINE/OFFLINE” on page 13.

5. Edit the Voice in the Voice mode.

5-1 On the “V” row of the Voice section, click the Bank name or Voice name to call up the

VOICE LIBRARY window.

5-2 From the list in the VOICE LIBRARY, select the desired Voice to assign it temporarily to

the current Part.

You can confirm the sound of the selected Voice by clicking any note on the virtual keyboard or the

MOX6/MOX8 keyboard.

5-3 Click the Voice name or [OK] at bottom right of the window to close the VOICE LIBRARY

window.

You can cancel the Voice selection by clicking the Close (X) button or [Cancel] button at bottom right of

the window. By executing this operation, the Voice selection is reset to the original status and the VOICE

LIBRARY window closes.

NOTICE

When a different Voice has been selected, your edits of the previously selected Voice will be lost. If you want to store

the edits, make sure to store the Voice by using the Store window (page 46) before changing the Voice.

An Example of MOX6/MOX8 Editor VST in Use: Editing in the Voice mode

MOX6/MOX8 Editor VST Owner’s Manual

5-4 Edit the Voice parameters as desired.

Edit the parameters (EQ, chorus, reverb, etc.) in the “V” row by clicking them.

To confirm how the parameter edit affects the Voice sound, click any note on the virtual keyboard or the

MOX6/MOX8 keyboard.

To make detailed settings of the selected Voice, click the arrow button at the top of the right panel

next to the main window to call up the Detailed Parameter section.

n For details about Voice parameters, refer to “Editing a Normal Voice” and “Editing a Drum Voice” in the

Reference Manual.

6. Store the edited settings as a User Voice, as necessary.

6-1 Click [Store Voice] under [Edit] in the menu bar to open the Store window (page 46).

6-2 Select a Voice Bank from the following list:

• Normal User 1

• Normal User 2

• Normal User 3

• Drum User

n Normal User 1 – 3 are shown in the Store window when editing the Normal Voice while Drum User is shown in

the Store window when editing the Drum Voice.

6-3 Open the selected Bank, select the desired number as destination, then enter the name

of the Voice in the box at the top of this window.

An Example of MOX6/MOX8 Editor VST in Use: Mixing edit in the Song or Pattern mode

MOX6/MOX8 Editor VST Owner’s Manual

6-4 Click [Store] to store the edited Voice to the selected number in the selected Bank.

Performing this operation will store the Voice data to the User Voice Bank in the MOX6/MOX8 instrument

as well as that within the Editor.

NOTICE

When you execute the Store operation, the settings for the destination memory (of both the Editor and instrument)

will be overwritten. Select the destination Voice number carefully to prevent important data from being erased

accidentally. For this reason, important data should always be saved to a separate USB storage device.

n You can store the settings of the parameters in the “G” row except for the Chorus and Reverb settings by

clicking [Store Global] under [Edit] in the menu bar.

Mixing edit in the Song or Pattern mode

This section explains how to edit a Mixing program in the Song mode.

1. Change the mode to the Song mode by clicking [Song] of the [Voice]/[Song]/[Pattern]

indication.

The Auto Sync appears automatically during ONLINE status.

2. From the Auto Sync window, click [Start] at the bottom.

Data synchronization will be started if the Port settings are correct. As soon as data synchronization is

completed, the Auto Sync window is closed.

3. Edit the parameters of the Mixing and Voice assigned to each Part.

If you want to change the parameter values from the original ones of the selected Song or Pattern, click

(drag and drop) each of the parameters such as EQ and effect lined up to the right of “G” in the Global/

Multi section and “1” – “16” in the Part section.

An Example of MOX6/MOX8 Editor VST in Use: Mixing edit in the Song or Pattern mode

MOX6/MOX8 Editor VST Owner’s Manual

To confirm how the parameter edit affects the Voice sound, click any note on the virtual keyboard.

To make detailed settings of the selected Multi, click the arrow button at the top of the right panel

next to the main window to call up the Detailed Parameter section.

n The MOX6/MOX8 Editor VST lets you edit the Voice parameters in the Song or Pattern mode as well as Voice

mode. In the Voice mode, you can edit only the selected Voice. In the Song or Pattern mode, on the other

hand, you can edit the parameters of the Voice assigned to each Part as well as the Mixing parameters. The

edited Voice can be stored to the same Voice Bank as a User Voice regardless of the mode used for editing.

4. Store the edited Voice or a Mixing, as necessary.

4-1 Select the [Mixing Store] under [Edit] in the menu bar then store the edited Mixing.

4-2 Select the Part to which the desired Voice is assigned, select [Store Voice] under [Edit] in

the menu bar to call up the Store window (page 46) then store the Voice via the same

operations as in steps 6-1, 6-2, 6-3 and 6-4.

5. Select [Save] or [Save As] under [File] on the menu bar to save the edited data as a file

(extension: *.X4E).

All the settings you made and the Voice data you stored to the User Banks will be saved as a single file

(extension: X4E). When you open this file next time to call up the Auto Sync window, click [Start] to

synchronize the status of the parameter settings between the MOX6/MOX8 Editor VST and the MOX6/

MOX8 instrument.

The Save operation from the Cubase series File menu will save the Project file including the settings

made via the MOX6/MOX8 Voice Editor VST. This means that opening the same Project file next time will

call up the settings lastly made via the MOX6/MOX8 Voice Editor VST.

An Example of MOX6/MOX8 Editor VST in Use: Mixing edit in the Song or Pattern mode

MOX6/MOX8 Editor VST Owner’s Manual

NOTICE

It is recommended that Auto Save be set to off in the Preferences - General window of Cubase series. If Auto Save is

set to on, a backup of the Cubase series Project file will be created automatically, resulting in the Indicators showing

the Editing Status being turned off, even though the Voice Edit settings have not been saved yet. This allows you to

open a new file or different file, resulting in the settings being lost. In other words, to best avoid losing your editing

data, set Auto Save to off.

MOX6/MOX8 Editor VST Window: Overall section

MOX6/MOX8 Editor VST Owner’s Manual

MOX6/MOX8 Editor VST Window

Overall section

VST Preset

This box lets you store the settings made on the MOX6/MOX8 Editor VST as VST Preset or recall it.

Click the icon ( ) at right of this box, select “Save Preset,” enter the desired name of the new VST

Preset on the “Save Preset” window then store the settings. The currently edited Voice will be stored in

the Voice mode while the edited Mixing setup will to be stored in the Song or Pattern mode.

The stored settings can be recalled by clicking the icon ( ) at right of this box, selecting “Load Preset”

then selecting the VST Preset. The name of the selected VST Preset will be shown in this box. No name

is shown in this box if no Preset VST is recalled.

n The data of the MOX6/MOX8 stored as VST Preset can be handled like the other VST Presets in the Media

Bay of Cubase series 5.1.1 or later.

NOTICE

Note that recalling the VST Preset will overwrite or erase the current settings of the MOX6/MOX8 Editor VST.

File, Edit, Bulk, Help

Refer to page 35.

Voice/Song/Pattern mode

Determines the mode of the MOX6/MOX8, Voice, Song or Pattern. As soon as “Voice,” “Song” or

“Pattern” is selected here, the mode of the MOX6/MOX8 instrument changes accordingly and the Auto

Sync window (page 50) opens. After setting parameters as necessary on this window, click [Start] to

execute data synchronization between the MOX6/MOX8 Editor VST and the MOX6/MOX8 instrument.

ONLINE/OFFLINE

Clicking this switches the status of the Editor between “ONLINE” and “OFFLINE.” When “ONLINE” is

indicated, the edited status is completely synchronized between the MOX6/MOX8 Editor VST and the

MOX6/MOX8 instrument, meaning that any parameter edit you make on the MOX6/MOX8 Editor VST is

reflected in the same parameter on the MOX6/MOX8 instrument and vice versa. When OFFLINE is

selected, editing on the MOX6/MOX8 Editor VST will not affect the MOX6/MOX8 instrument and vice

versa even if the MOX6/MOX8 instrument is connected to a computer.

Note that the indication here is automatically changed according to the status of communication

between the MOX6/MOX8 Editor VST and the MOX6/MOX8 instrument. For example, the ONLINE status

changes automatically to OFFLINE when the cable is disconnected accidentally.

Indicates that the current status is set to ONLINE. Clicking this calls up OFFLINE ( ) described below.

Keep in mind that the ONLINE indication cannot be enabled when the MIDI Port is not set properly or the

MOX6/MOX8 instrument is not properly connected to a computer.

This OFFLINE indication shows that the MIDI Port is set properly and the MOX6/MOX8 is properly

connected to a computer. Clicking this calls up the Auto Sync window. From the Auto Sync window, you

can synchronize the settings between the MOX6/MOX8 Editor VST and the MOX6/MOX8 by clicking the

[Start] button. As soon as data synchronization is completed, the Auto Sync window is closed and the

status of the Editor changes from OFFLINE to ONLINE.

MOX6/MOX8 Editor VST Window: Overall section

MOX6/MOX8 Editor VST Owner’s Manual

n When the Global, Current and Voice settings are set to “Off” and Auto Start is set to “On” in the Auto Sync

window, clicking here changes the Editor status from OFFLINE to ONLINE without opening the Auto Sync

window.

This OFFLINE indication shows that the MIDI Port is not set properly or the MOX6/MOX8 instrument is not

connected to a computer properly. Clicking this calls up the Auto Sync window. After making sure to

connect the MOX6/MOX8 instrument to a computer, set the MIDI Port properly then click the [Start] button

in the Auto Sync window to execute data synchronization between the MOX6/MOX8 Editor VST and the

MOX6/MOX8. As soon as data synchronization is completed, the Auto Sync window is closed and the

status of the Editor is changed from OFFLINE to ONLINE.

MOX6/MOX8 Editor VST Window: When the Voice/Song/Pattern is set to “Voice” (Mixer section)

MOX6/MOX8 Editor VST Owner’s Manual

When the Voice/Song/Pattern is set to “Voice”

Mixer section

Global

This strip lets you edit the main parameters in the Voice mode, such as effect-related ones.

n When editing any of the Global parameters described below, a small square appears at the top right of the

“G” box until you save the edited data as a file. This indication is the same as the [F] indicator (page 22).

Lo, Lo-M, Mid, Hi-M, Hi (Master EQ)

Edits the Master EQ parameters.

Chorus

Selects the Chorus type.

Reverb

Selects the Reverb type.

Master Effect

Turns the Master Effect on or off and selects the Master Effect type.

Volume

Adjust the entire volume.

[Voice]/[AD Part] tab

Selects the Parts to be edited from [Voice] and [AD Part]. The illustration below indicates that the [Voice]

tab is active.

Before editing

After editing

MOX6/MOX8 Editor VST Window: When the Voice/Song/Pattern is set to “Voice” (Mixer section)

MOX6/MOX8 Editor VST Owner’s Manual

Voice

When the [Voice] is selected:

Edits the Voice parameters. Clicking the “V” row turns this section on as illustrated below.

n When editing any of the Voice parameters described below, a small square appears at the top right of the “V”

box until you save the edited data as a file or you store the edited data as a Voice. This indication is the same

as the [V] indicator (page 29).

n The MIDI monitor mark is at the left side of the “V” mark. A small LED lights when the specific MIDI channel

receives MIDI messages.

Category, Bank, No., Voice Name

Indicates the Category Bank and name of the Voice. When clicking here, the VOICE LIBRARY window

appears at the right half section, letting you select a different Voice for editing.

VOICE LIBRARY

Close button

Click this to close this window without applying the changes to the MOX6/MOX8 Editor VST.

[Category]/[Bank] checkboxes

Click either of these boxes to determine whether the Voices listed here are divided into Category

folders or Bank folders.

Before editing

After editing

MOX6/MOX8 Editor VST Window: When the Voice/Song/Pattern is set to “Voice” (Mixer section)

MOX6/MOX8 Editor VST Owner’s Manual

[+]/[–] buttons

Click the [+] button to open all the folders so that all Voices appear in all folders. Click the [–] button to

close all folders.

Folder (Category or Bank)

Click each folder to open or close it.

Voices

Indicates the Voices included in the folder. You can select the Voice temporarily by clicking it. When

double-clicking a Voice, the Voice is actually selected and this window closes. You can also copy the

Preset Voice(s) and User Voice(s) from the original location to any location in the User Bank by

dragging-and-dropping the Voice(s). In the User Bank, you can rearrange the Voices by dragging-and-

dropping the Voice(s) to a new location.

If you enter checkmarks to the checkboxes of your most-used or favorite Voice, you can call up a list of

these Voices on the VOICE LIBRARY by setting the [Favorites] checkbox to on.

n Selecting, copying, pasting or dragging-and-dropping multiple Voices is done in the same way as

normal on your computer OS.

n By right-clicking on Windows / <control> key + clicking on Mac this section and selecting a menu,

you can use the following functions.

• Opening/closing all the folders

• Determining whether the Voices listed here are divided into Category folders or Bank folders.

• Copying/pasting

• Changing the Voice name

• Deleting all the checkmarks of the Favorites checkboxes at left of the Voices

• Saving the VST presets

n There are two ways to save a VST preset.

• Right-click (Windows) / <control> key + click (Mac) on the Voice Library > Save VST presets

• Click the “Save a VST preset” button on the Cubase series

“Save VST presets” on the right click menu allows you to save a voice of the User Bank separately.

You need to save the voice of the Preset Bank to the User Bank when you want to save the Voice of

the Preset Bank as a VST preset.

The “Save a VST preset” button on the Cubase series will save all settings of the MOX6/MOX8

Editor VST as a VST preset.

Search Box

You can search for your desired Voice by inputting a keyword here.

[Favorites] checkbox

By entering the checkmark to this checkbox, you can call up a list of your favorite Voices on the VOICE

LIBRARY. You can select your favorite or most-used Voices for this list by entering checkmarks to the

appropriate checkboxes at the left of each Voice.

[OK]/[Cancel] buttons

Click the [OK] button to apply the settings and close this window. Click the [Cancel] button to quit

without applying the Voice selection.

Refresh

When the VOICE LIBRARY is shown in the Editor and you store the Voice(s) on the MOX6/MOX8 itself,

the name(s) of the Voice(s) in the VOICE LIBRARY may be different from the Voice name(s) on the

MOX6/MOX8. If this happens, click this button to update the Voice names of the VOICE LIBRARY.

MOX6/MOX8 Editor VST Window: When the Voice/Song/Pattern is set to “Voice” (Mixer section)

MOX6/MOX8 Editor VST Owner’s Manual

EQ Lo, Mi, Hi (Part EQ)

Adjusts the equalizer settings for the current Voice.

Cho, Rev, Pan (Chorus, Reverb, Pan)

Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the current Voice by using

the graphic knobs.

Volume

Adjusts the volume of the current Voice.

ARP (Arpeggio)

Turns Arpeggio playback on or off for the current Voice.

When the [AD Part] is selected:

This section lets you edit parameters for the AD Part in the Voice mode.

Cho, Rev, Pan (Chorus, Reverb, Pan)

Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the AD Part in the Voice

mode by using the graphic knobs.

n The Chorus Send and Reverb Send for the AD Part affect only when the USB I/O Mode parameter in the

Utility mode is set to “1 StereoRec.”

Volume

Adjusts the Volume for the AD Part.

MOX6/MOX8 Editor VST Window: When the Voice/Song/Pattern is set to “Voice” (Parameter Category section)

MOX6/MOX8 Editor VST Owner’s Manual

Parameter Category section

You can edit detailed parameters for the current Part by clicking the button (located near the top right of

the window, just below the model name) to call up the Detailed Parameter section. Calling up the Detailed

Parameter section moves the Parameter Category Section rightward as shown below.

Parameter Category section

Parameter Category section Detailed Parameter section

MOX6/MOX8 Editor VST Window: When the Voice/Song/Pattern is set to “Voice” (Parameter Category section)

MOX6/MOX8 Editor VST Owner’s Manual

The indicated categories in the Parameter Category section differs depending on the selected row: G, V, or

AD Part, as illustrated below. Clicking each of Categories calls up the corresponding parameters in the

Detailed Parameter section. The “G” indication shown below appears when clicking the “G” row. The “V”

indication shown below appears by clicking the “V” row appearing only when the [Voice] tab is selected at

the bottom of the Mixer section. The “AD” indication shown below appears by clicking the “AD” row

appearing only when the [AD Part] tab is selected at the bottom of the Mixer section.

Open/Close button

This button opens/closes the Detailed Parameter section. When only the left arrow is indicated in white,

the Detailed Parameter section is hidden and you can call it up by clicking here. When only the right

arrow is indicated in white, the Detailed Parameter section is shown on the display, allowing you to edit

the displayed parameters. The Detailed Parameter section can be closed by clicking this button. You

can also conveniently open and close the Detailed Parameter window from your computer keyboard.

Hold down the <Ctrl> key (Command key for Mac) and simultaneously press the left arrow () key to

open the window, or hold <Ctrl> key (Command key for Mac) and press the right arrow () key to close

it.

Global Settings

This is shown when the “G” row is selected in the Mixer section. Clicking each of the parameter

categories calls up the corresponding Global parameters in the Detailed Parameter section.

Voice Common

This is shown when the “V” row is selected in the Mixer section. Clicking each of the parameter

categories calls up the corresponding Voice Common parameters in the Detailed Parameter section.

“G” “V” “AD”

Sivu latautuu...

Yamaha MOX6 Omistajan opas

Merkki: Yamaha

Malli: MOX6

Luokka: Software

Tyyppi: Omistajan opas

Tämä ohje sopii myös

MOX8

Lataa PDF

raportti

muilla kielillä

polski: Yamaha MOX6 Instrukcja obsługi
Türkçe: Yamaha MOX6 El kitabı
English: Yamaha MOX6 Owner's manual
čeština: Yamaha MOX6 Návod k obsluze
svenska: Yamaha MOX6 Bruksanvisning
русский: Yamaha MOX6 Инструкция по применению
italiano: Yamaha MOX6 Manuale del proprietario
Deutsch: Yamaha MOX6 Bedienungsanleitung
português: Yamaha MOX6 Manual do proprietário
dansk: Yamaha MOX6 Brugervejledning
français: Yamaha MOX6 Le manuel du propriétaire
español: Yamaha MOX6 El manual del propietario
Nederlands: Yamaha MOX6 de handleiding
română: Yamaha MOX6 Manualul proprietarului

Yamaha MOX6 Omistajan opas

Tämä ohje sopii myös

Yamaha MOX6 Omistajan opas

muilla kielillä

Aiheeseen liittyviä papereita