Yamaha UW10 Omistajan opas

Brändi: Yamaha

Malli: UW10

Tyyppi: Omistajan opas

USB-AUDIO INTERFACE

Owner's Manual

Bedienungsanleitung

Mode d'emploi

This document is printed on recycled chlorine

free (ECF) paper with soy ink.

Auf Recycling-Umweltpapier gedruckt.

Ce document a été imprimé sur du papier recyclé

non blanchi au chlore.

M.D.G., Pro Audio & Digital Musical Instrument Division,

Yamaha Corporation

305AP-01A0 Printed in China

Yamaha Web Site (English only)

www.yamahasynth.com

Yamaha Manual Library

http://www2.yamaha.co.jp/manual/english/

USB-AUDIO INTERFACE

EnglishDeutschFrançais

SPECIAL MESSAGE SECTION

This product utilizes an external power supply

(adapter). DO NOT connect this product to any

power supply or adapter other than one

described in the manual, on the name plate, or

specifically recommended by Yamaha.

WARNING:

Do not place this product in a

position where anyone could walk on, trip over,

or roll anything over power or connecting cords

of any kind. The use of an extension cord is not

recommended! If you must use an extension

cord, the minimum wire size for a 25' cord (or

less) is 18 AWG. NOTE: The smaller the AWG

number, the larger the current handling capacity.

For longer extension cords, consult a local

electrician.

This product should be used only with the

components supplied or; a cart, rack, or stand

that is recommended by Yamaha. If a cart, etc.,

is used, please observe all safety markings and

instructions that accompany the accessory

product.

SPECIFICATIONS SUBJECT TO

CHANGE:

The information contained in this manual is

believed to be correct at the time of printing.

However, Yamaha reserves the right to change

or modify any of the specifications without notice

or obligation to update existing units.

Do not attempt to service this product beyond

that described in the user-maintenance

instructions. All other servicing should be

referred to qualified service personnel.

This product, either alone or in combination with

an amplifier and headphones or speaker/s, may

be capable of producing sound levels that could

cause permanent hearing loss. DO NOT operate

for long periods of time at a high volume level or

at a level that is uncomfortable. If you

experience any hearing loss or ringing in the

ears, you should consult an audiologist.

IMPORTANT: The louder the sound, the shorter

the time period before damage occurs.

Some Yamaha products may have benches and/

or accessory mounting fixtures that are either

supplied with the product or as optional

accessories. Some of these items are designed

to be dealer assembled or installed. Please

make sure that benches are stable and any

optional fixtures (where applicable) are well

secured BEFORE using. Benches supplied by

Yamaha are designed for seating only. No other

uses are recommended.

NOTICE:

Service charges incurred due to a lack of

knowledge relating to how a function or effect

works (when the unit is operating as designed)

are not covered by the manufacturer's warranty,

and are therefore the owners responsibility.

Please study this manual carefully and consult

your dealer before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are

both user safe and environmentally friendly. We

sincerely believe that our products and the

production methods used to produce them, meet

these goals. In keeping with both the letter and

the spirit of the law, we want you to be aware of

the following:

Disposal Notice:

Should this product become damaged beyond

repair, or for some reason its useful life is

considered to be at an end, please observe all

local, state, and federal regulations that relate to

the disposal of products that contain lead,

batteries, plastics, etc. If your dealer is unable to

assist you, please contact Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the

product. The model number, serial number,

power requirements, etc., are located on this

plate. You should record the model number,

serial number, and the date of purchase in the

spaces provided below and retain this manual as

a permanent record of your purchase.

Model

Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

93-DC

* Please make a note of the model number, the serial number and the purchase date.

UW10 Owner’s Manua

English

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death

from electrical shock, short-circuiting, damages, ﬁre or other hazards. These precautions include, but are

not limited to, the following:

• Check the USB connector periodically and remove any

dirt or dust which may have accumulated on it.

• Do not place the cable near heat sources such as heat-

ers or radiators, and do not excessively bend or other-

wise damage the cable, place heavy objects on it, or

place it in a position where anyone could walk on, trip

over, or roll anything over it.

• Do not open the instrument or attempt to disassemble the

internal parts or modify them in any way. The instrument

contains no user-serviceable parts. If it should appear to

be malfunctioning, discontinue use immediately and have

it inspected by qualiﬁed Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or

in damp or wet conditions, or place containers on it con-

taining liquids which might spill into any openings.

•Never insert or remove cables with wet hands.

• Do not put burning items, such as candles, on the unit.

A burning item may fall over and cause a ﬁre.

• If the USB cable becomes frayed or damaged, or if there is a

sudden loss of sound during use of the instrument, or if any

unusual smells or smoke should appear to be caused by it,

immediately disconnect the USB connector, and have the

instrument inspected by qualiﬁed Yamaha service personnel.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or

damage to the instrument or other property. These precautions include, but are not limited to, the following:

• Do not expose the instrument to excessive dust or vibra-

tions, or extreme cold or heat (such as in direct sunlight,

near a heater, or in a car during the day) to prevent the

possibility of panel disﬁguration or damage to the inter-

nal components.

• Do not use the instrument in the vicinity of a TV, radio, ste-

reo equipment, mobile phone, or other electric devices.

Otherwise, the instrument, TV, or radio may generate noise.

• Do not place the instrument in an unstable position

where it might accidentally fall over.

• Before moving the instrument, remove all connected

cables.

• Before connecting the instrument to other electronic

components, turn off the power for all components.

Before turning the power on or off for all components, set

all volume levels to minimum. Also, be sure to set the

volumes of all components at their minimum levels and

gradually raise the volume controls while playing the

instrument to set the desired listening level.

• When cleaning the instrument, use a soft, dry cloth. Do

not use paint thinners, solvents, cleaning ﬂuids, or chem-

ical-impregnated wiping cloths.

• Do not insert a ﬁnger or hand in any gaps on the instrument.

•Never insert or drop paper, metallic, or other objects into

the gaps on the panel. If this happens, disconnect the

USB cable. Then have the instrument inspected by qual-

iﬁed Yamaha service personnel.

• Do not place vinyl, plastic or rubber objects on the instru-

ment, since this might discolor the panel or keyboard.

• Do not rest your weight on, or place heavy objects on the

instrument, and do not use excessive force on the but-

tons, switches or connectors.

Cables

Do not open

Water warning

Fire warning

If you notice any abnormality

Location

Connections

Maintenance

Handling caution

(3)-7

UW10 Owner’s Manual

English

• Do not operate the instrument for a long period of time at

a high or uncomfortable volume level, since this can

cause permanent hearing loss. If you experience any

hearing loss or ringing in the ears, consult a physician.

Yamaha cannot be held responsible for damage

caused by improper use or modifications to the

instrument, or data that is lost or destroyed.

(3)-7

UW10 Owner’s Manua

English

Welcome to the UW10

Thank you for choosing the Yamaha UW10 USB-Audio Interface. The UW10 is a

USB interface that enables simultaneous transfer of audio data. Connect the

UW10 to a computer that has a USB connector and enjoy the powerful features of

digital audio.

Please read this Owner’s Manual thoroughly to make the best use of the UW10.

After you read this manual, please keep it in a safe place for future reference.

Table of contents

UW10 Features................................................................................. 6

Notes on USB ......................................................................... 6

Notes on musical copyrights ................................................... 7

Package Contents............................................................................. 8

About the included software ................................................... 8

System Requirements ..................................................................... 10

Parts and Functions ........................................................................ 10

Signal Flow ........................................................................... 12

Connections................................................................................... 13

Installing the driver ........................................................................ 16

Installing the driver ............................................................... 16

Setting up the included software .......................................... 24

Using the UW10............................................................................. 26

Recording the data from vinyl records

or cassette tapes to a computer ............................................ 26

Creating a single song file from a digital recording ............... 27

Recording MIDI data as digital audio data ............................ 27

Storing digital recordings on a music CD .............................. 28

Specifications ................................................................................. 29

Troubleshooting (FAQ)................................................................... 29

• Before installing the software, be sure to read the software license agreement included at the end

of this document. Opening the CD-ROM package indicates your consent to the license agreement.

• The company names and product names in this Owner’s Manual are the trademarks or registered

trademarks of their respective companies.

• OMS

and are trademarks of Opcode Systems, Inc.

• MPEG Layer-3 audio compression technology licensed by Fraunhofer IIS and THOMSON

Multimedia.

• “SoftSynthesizer” is a trademark of Yamaha Corporation.

The screen displays and illustrations in this Owner’s Manual are for instructional purposes, and

may appear somewhat different from the screens that appear on your computer or in the

specifications for your unit.

UW10 Owner’s Manual

English

UW10 Features

●

Digital and analog interface

The UW10 functions as an interface that enables you to digitally record MDs and

cassette tapes to a computer, or create music using an audio/MIDI sequencer and

MIDI tone generators (MOTIF-RACK etc.). The analog inputs on the UW10

convert incoming analog signals into digital. This prevents audio deterioration

due to computer noise and enables you to perform clean, clear sound recordings.

●

Easy Hot Swap Connection

You can connect and disconnect a USB cable while the power to the computer is

turned on. The power is provided through the USB bus power supply. For this

reason, the UW10 does not require a power adapter.

●

Versatile software programs

An included software program, called TWEplus Wave Editor, enables you to record

via the UW10 and edit various wave files (MP3, WAV, AIFF). Another program, the S-

YXG50 SoftSynthesizer, enables you to play MIDI data on the computer, record it,

then convert it into a wave file in TWEplus, with the UW10 set in Track Down mode.

●

Supports Windows

The UW10 supports Windows 98/Me/2000/XP.

Notes on USB

Do not connect or disconnect a USB cable under any of the following

circumstances. Otherwise, the computer may lock up or the UW10 functions may

be disabled:

•

The computer is checking the device or loading the driver.

•

The computer is starting or quitting the OS.

•

The computer is in Save Energy (Sleep) mode or is canceling the mode.

•

An audio/MIDI application is active.

In addition, do not perform any of the following operations. Otherwise, the

computer may lock up or the UW10 functions may be disabled:

•

Frequently connecting and disconnecting the cables

•

Placing the computer in Save Energy (Sleep) mode or cancelling the mode dur-

ing audio data transfer

•

Connecting or disconnecting the cables, restarting or shutting down the com-

puter, or installing or uninstalling the driver while a large amount of data is

being transferred

UW10 Owner’s Manua

English

Notes on musical copyrights

The UW10 supports SCMS (Serial Copy Management System) to protect

copyrights associated with music software. When you copy data from CDs, or

other music media purchased from stores, to your own media (such as MDs)

using a digital connection, information regarding the digital recording generation

is also recorded. If you route the recorded data to a DIGITAL IN jack, you will be

unable to record the data on a computer. In this case, use the UW10’s analog

inputs (INPUT jacks) to record data on the computer.

It is prohibited to use copyrighted songs and sound data (that can be

recorded via the UW10) for commercial purposes. It is also prohibited to

reproduce, transfer, or distribute the data, or play the data for a commercial

audience without permission from the owners of the copyright, except for

personal use or applications that do not infringe the copyright. If you wish to

use such data for occasions other than personal use, consult a copyright

expert. Yamaha is not responsible for any data created, reproduced, or edited

using the UW10, nor for any reproduction or use of such data.

computer

digital

digital analog

digital

UW10

USB-AUDIO INTERFACE

SOURCE SELECT

DIGITAL INPUT OUTPUT

IN OUT L R L R

DIGITAL

INPUT

TRACK DOWN

USB-AUDIO INTERFACE

SOURCE SELECT

DIGITAL INPUT OUTPUT

IN OUT L R L R

DIGITAL

INPUT

TRACK DOWN

You cannot

record.

You can

record.

UW10 Owner’s Manual

English

Package Contents

The UW10 package contains the following items. Check the contents for missing

items.

•

UW10 main unit

•

CD-ROM

•

USB cable (approx. 2 meters)

•

Owner’s Manual (this book)

About the included software

The included CD-ROM contains the following software programs.

The “English” folder on the included CD-ROM contains the following software

programs.

Each program’s operating environment may be different from the UW10’s operating

environment (page 10). For more information, refer to the software on-line manuals.

TWEplus Wave Editor

TWEplus Wave Editor enables you to record, play, and edit Wave files. It supports

various file formats, such as MP3, WAV, and AIFF, and can convert these file

formats from one into another. Double-click “Setup.exe” in the “TWEplus_”

folder to start the installer. Follow the instruction on screen to install the software.

After you finish the installation, start the application by selecting from the “Start”

menu [Programs | YAMAHA TWEplus | Wave Editor TWEplus]. For more

information on using the software, refer to the on-line manual.

SoftSynthesizer (S-YXG50)

The S-YXG50 is XG tone generator software that produces voices using the

computer’s CPU power. By installing SoftSynthesizer, you can enjoy high tonal

quality from MIDI data without connecting an external MIDI tone generator.

To start the installer, double-click “Setup.exe” in the “Syxg50_” folder. Install

SoftSynthesizer following the instructions on screen.

NOTE

UW10 Owner’s Manua

English

For more information on using the software, after you finish the installation,

refer to the “S-YXG50 Help” file by selecting from the “Start” menu [Programs

| YAMAHA SoftSynthesizer S-YXG50 | S-YXG50 Help].

Windows 2000/XP Users:

If you hear sound skips from the S-YXG50 on the Windows 2000/XP platform, you

may be able to resolve the problem by following the steps below:

1. From the “Start” menu, select [Programs | YAMAHA XG SoftSynthesizer S-YXG50 |

S-YXG50 Settings] to display the “Settings” window.

2. Click the “Information” tab. If the window indicates “Ver.4.01.xx Legacy” (xx is a

version number) for the S-YXG50 version, proceed to Step 3.

3. Log on to Windows as Administrator, then open the “Syxg50_” folder on the

included CD-ROM.

4. Right-click “Turbo.inf” or “Normal.inf” in the folder to display the pop-up menu, then

select “Install” from the menu.

Nomal.inf: The sound might skip occasionally, but most sound cards will output sound.

Turbo.inf: The sound will not skip, but some sound cards may not output sound.

5. Restart the computer.

XGplayer

You can use XGplayer to play MIDI data, which you can output via

SoftSynthesizer, then record it as a wave file in TWEplus with the UW10 in

Track Down mode.

This application is automatically installed when you install the S-YXG50

SoftSynthesizer. To start XGplayer after you finish the installation from the

“Start” menu, select [Programs | YAMAHA SoftSynthesizer S-YXG50 | XGplayer].

Acrobat Reader

The Acrobat Reader allows you to view an electronic version of the Owner’s

Manual saved in PDF format.

To start the installer, open the “English” folder in the “Acroread_” folder, then

double-click “ar500enu.exe.” Install the software according to the instructions

on screen.

MidRadio Player

MidRadio Player receives and plays MIDI and Sound VQ data, sort of like a

radio channel. You can listen to pieces of music continuously by connecting to

the Internet and selecting your favorite channel. You can also purchase song

data on the Internet.

To install MidRadio Player, double-click “mr4221E.exe” in the “Midradio_”

folder to start the installer, then follow the instruction on screen.

NOTE

UW10 Owner’s Manual

English

ASIO driver

This driver software is required if you wish to use applications that support

ASIO. Refer to the “ReadMe.html” in “English” folder in the “ASIOdrv_” folder

for information on how to install the driver.

TWEplus does not support ASIO.

System Requirements

Computer: IBM PC/AT or compatible computer that features a

USB connector

CPU: Intel

Pentium

or Celeron

processor with

500MHz or faster

(Windows XP: Intel

Pentium

or Celeron

processor, 750MHz or faster)

Memory: 64MB or more (128MB or more recommended)

Available hard disk space: 10MB or more

(excluding the space required for Acrobat Reader

and MidRadio Player)

Operating System: Windows 98/98SE/2000/Me/XP

Some operating systems may require a superior environment than that specified above.

Parts and Functions

1 Power LED

The LED lights up when the USB

connector is connected and the

power is being supplied from the

computer to the unit.

2 SOURCE SELECT switch

Use this switch to select the INPUT

jacks or the DIGITAL IN jack. If you

select “TRACK DOWN,” an audio

signal input from the computer to

the UW10 is returned to the

computer unmodified (page 15).

NOTE

SOURCE SELECT

IN OUT L R

DIGITAL INPUT

OUTPUT

DIGITAL

INPUT

TRACK DOWN

USB-AUDIO INTERFACE

35467

UW10 Owner’s Manual 11

English

In this case, the INPUT and DIGITAL

IN jacks are disabled.

With some application programs, input

audio signals may be output unmodified. In

this case, do not set the SOURCE SELECT

switch to “TRACK DOWN.” Otherwise,

audio signals may oscillate, causing hearing

loss or damage to the playback device.

3 USB connector

Connect this connector to a

computer’s USB connector using a

USB cable.

You do not have to turn off the

power to the computer when you

connect this

connector

4 DIGITAL IN jack

A digital signal is input here from

an MD or CD player via an optical

digital cable (with square plugs).

Set the SOURCE SELECT switch on

the side panel to “DIGITAL.”

5 DIGITAL OUT jack

This jack is used to record a digital

signal from the computer to a

digital recorder, such as an MD

recorder. Use an optical digital

cable (with square plugs) to make

the connection.

Signals input at INPUT and

DIGITAL IN cannot be routed

directly to the DIGITAL OUT jack.

6 INPUT L/R jacks

Connect an audio device, such as a

CD player, here using RCA pin

cables. You can record an audio

signal input here to a computer.

Set the SOURCE SELECT switch on

the side panel to “INPUT.”

7 OUTPUT L/R jacks

These jacks are used to connect

powered speakers or a recording

device, such as a tape recorder. Use

RCA pin-plug cables for the L and R

connections.

8 Volume Dial

The Volume Dial adjusts the level of

signals output from the headphone

jack and OUTPUT jacks. Use the

Volume Dial to adjust the output level.

9 Headphone jack

Connect a headphone stereo mini-

plug here. Use the Volume Dial to

adjust the headphone volume.

CAUTION

NOTE

12 UW10 Owner’s Manual

English

Signal Flow

Depending on the SOURCE SELECT switch setting, the audio signal flow varies as

follows:

When the switch is set to “INPUT”:

Audio signals input at the INPUT jacks can be recorded to a computer via the USB

connection.

When the switch is set to “DIGITAL”:

Audio signals input at the DIGITAL IN jack can be recorded to a computer via the

USB connection.

When the switch is set to “TRACK DOWN”:

Audio signals played on the computer can be returned via the USB connection to

the computer for recording (page 15).

ININ OUTOUT

DIGITALUSB

INPUT OUTPUT

Headphone

VOLUME

ININ OUTOUT

DIGITALUSB

INPUT OUTPUT

Headphone

VOLUME

ININ OUTOUT

DIGITALUSB

INPUT OUTPUT

Headphone

VOLUME

UW10 Owner’s Manual 13

English

Connections

Combining the UW10 with other devices allows for versatile applications as

follows:

● High-quality music production system using digital connections

Using the UW10 along with a tone generator, such as MOTIF-RACK, enables high-

quality recording.

Connect the UW10, the MOTIF-RACK and a computer using USB cables. Connect

the MOTIF-RACK to the UW10’s DIGITAL IN jack, and set the UW10’s SOURCE

SELECT switch to “DIGITAL.”

Since the signal is sent from the UW10 or MOTIF-RACK to a mixer via an analog

connection, you will be monitoring an analog signal through powered speakers or

headphones. On the other hand, the signal is recorded via a digital connection

from the UW10’s DIGITAL OUT jack to a connected MD recorder. This

configuration enables you to make high-quality digital recordings.

When you are using the connections illustrated above, set the Echo Back setting of

your sequence software to “Off.”

Refer to the Owner’s Manual for the sequence software for detailed information on

setting the Echo Back parameter.

PC + Sequence Software

UW10

DIGITAL

OUT

DIGITAL OUT

INPUT

OUTPUT

DIGITAL IN

MOTIF-RACK etc.

USB-AUDIO INTERFACE

SOURCE SELECT

DIGITAL INPUT OUTPUT

IN OUT L R L R

DIGITAL

INPUT

TRACK DOWN

DIGITAL

OUT

Mixer, etc

USB (MIDI data)

Set the SOURCE

SELECT switch

to “DIGITAL.”

USB

(audio data)

MD Recorder,etc

powered speakers

NOTE

14 UW10 Owner’s Manual

English

●Music production system using a guitar or microphone via

analog connections

Analog audio signals input from a guitar or microphone are converted to digital

for recording.

Patch the analog input from the guitar or microphone to the UW10’s INPUT jacks via

an effects unit or other equivalent device. In this case, set the UW10’s SOURCE SELECT

switch to “INPUT,” and connect powered speakers or headphones to the UW10.

●Connecting audio devices

Digital or analog input from an audio device can be converted to wave files on a

computer. You can also edit the wave files on the computer, then record them to

an audio device.

Patch a digital signal from an MD player to the UW10’s DIGITAL IN jack. Patch an

analog signal from a casette tape player or turntable to the UW10’s INPUT jacks.

Set the UW10’s SOURCE SELECT switch to “DIGITAL” or “INPUT” depending on

the jacks you are using. Connect an AV amplifier and mixer as necessary.

If you cannot adjust the output level of the audio device, some high volume sound sources

may distort your recordings, or low volume sound sources may create recordings that are

not inaudible. In this case, adjust the sound source level using the following measures:

• Connect the PHONE jack of the audio device to the UW10, then adjust the PHONE

level on the audio device.

• Connect a mixer or other device that enables you to adjust the volume level

between the audio device and the UW10.

If you try to record from a digital audio device (such as an MD or CD player) that has

an optical digital output, use an optional optical digital cable (with square plugs) to

connect the UW10. In this case, you do not have to adjust the level, since the

recording level will be the same as the sound source level.

UW10

USB-AUDIO INTERFACE

SOURCE SELECT

DIGITAL INPUT OUTPUT

IN OUT L R L R

DIGITAL

INPUT

TRACK DOWN

INPUT

OUTPUT

USB

DIGITAL

OUT

computer

guitar

microphone

Set the SOURCE

SELECT switch

to “INPUT.”

effects unit or

other equivalent device

mixer

MD recorder

powered speakers

NOTE

UW10 Owner’s Manual 15

English

●Track down on the computer

You can track down multiple wave files or SoftSynthesizer audio signals into a

single wave file, which can then be converted to an MP3 file using the included

TWEplus wave editor.

Connect the computer and the UW10, and set the UW10’s SOURCE SELECT switch

to “TRACK DOWN.” While playing MIDI or audio data on the computer, record it

using an audio editing application, such as TWEplus, to track down the data.

If you want to track down an external MIDI tone generator’s sound along with the data

on the computer, you will first need to convert the playback data into wave files.

UW10

USB-AUDIO INTERFACE

SOURCE SELECT

DIGITAL INPUT OUTPUT

IN OUT L R L R

DIGITAL

INPUT

TRACK DOWN

INPUT OUTPUT

USB

DIGITAL OUT

DIGITAL IN

computer

cassette tape deck

turntable

AV amplifier and mixer

speakers

MD recorder

NOTE

UW10

USB-AUDIO INTERFACE

SOURCE SELECT

DIGITAL INPUT OUTPUT

IN OUT L R L R

DIGITAL

INPUT

TRACK DOWN

OUTPUT

USB USB

computer

S-YXG50

XG Player

SoftSynthesizer

TWEplus

playback recording

Set the SOURCE

SELECT switch

to “TRACK DOWN.”

powered speakers

16 UW10 Owner’s Manual

English

Installing the driver

Before you can use the UW10, you need to install the driver on the computer.

The USB audio driver enables you to transfer audio signals between an audio

application on the computer and the UW10 via a USB cable.

The UW10 does not work with a USB hub that is powered by the USB bus power

supply.

Installing the driver

Follow the instructions below to install the USB audio driver included in the

Windows system, and set up Windows as needed.

Close all applications and windows on the computer, and disconnect the computer

from the network and the Internet.

Disconnect all devices that are connected to the UW10’s jacks, except for the USB

connector.

Disconnect all USB devices, except for the UW10, from the computer. Connect the

UW10 directly to the computer’s USB connector, not via a USB hub.

Check the drive name (D:, E:, Q:, etc.) of your CD-ROM drive, which is listed below the

CD-ROM icon in My Computer.

If the driver for another USB audio device has already been installed, you can use that

driver for the UW10.

You need the ASIO driver software to use applications that support ASIO. Refer to the

“ReadMe.html” file located in the “English” folder in the “ASIOdrv_” folder for

information on installing the driver software.

Windows 98/98SE users→page 17

Windows Me users→page 20

Windows 2000/XP users→page 20

audio

application

driver

UW10

USB cable

audio data

USB-AUDIO INTERFACE

SOURCE SELECT

DIGITAL INPUT OUTPUT

IN OUT LR LR

DIGITAL

INPUT

TRACK DOWN

computer

NOTE

UW10 Owner’s Manual 17

English

●Installing the driver on a Windows 98/98SE system

1. Start the computer.

2. Use the included USB cable to connect the UW10 to the computer’s USB con-

nector. The UW10 is powered on and the system automatically displays the

“Add New Hardware Wizard.”

3. Click [Next].

The system displays a screen that enables you to select a search method.

18 UW10 Owner’s Manual

English

4. Check the radio button to the left of “Search for the best driver for your device.

(Recommended).” Click [Next].

The system displays a screen that enables you to select a location in which to

install the driver.

5. Uncheck all items, then click [Next].

6. When the system detects the driver and is ready for installation, it displays the

following screen.

Make sure that the “USB Composite Device” is listed, then click [Next]. The

system starts the installation.

The system may ask you to insert a Windows CD-ROM while it checks for the driver.

Insert the Windows CD-ROM in the CD-ROM drive, specify the root folder of the CD-

ROM drive (such as D:\Win98\) and continue the installation. Drive and root folder

names vary depending on the computer.

NOTE

UW10 Owner’s Manual 19

English

7. When the installation is complete, the following screen appears.

Click [Finish].

Some computers may take about ten seconds to display this screen after installation is

complete.

8. After a few seconds, the “Add New Hardware Wizard” is displayed again.

Install “USB Audio Device” in the same manner as steps 3-7 described above.

The driver has been installed.

NOTE

20 UW10 Owner’s Manual

English

●Installing the driver on a Windows 2000/XP system

1. Start the computer.

2. Use the included USB cable to connect the UW10 to the computer’s USB connector.

The system displays the message “Found New Hardware” and automatically

detects and installs the driver.

The window closes and the driver is installed.

●Installing the driver on a Windows Me system

1. Start the computer.

2. Use the included USB cable to connect the UW10 to the computer’s USB connector.

The UW10 is powered on and the system automatically displays the “Add New

Hardware Wizard.”

3. Check the radio button to the left of “Automatic search for a better driver (Rec-

ommended).” Click [Next].

4. When the system ﬁnishes detecting and installing the driver, it displays the fol-

lowing message: “Windows has ﬁnished installing the new hardware device.”

Click [Finish].

The driver has been installed.

●Verifying the installation

You can verify whether the driver has been installed correctly by following the

steps below:

1. Double-click [My Computer | Control Panel | System].

If the System folder does not appear in the Control Panel on the Windows Me system,

click “view all Control Panel options.”

For Windows XP users: Click “Switch to Classic View” to change the Control Panel to

Classic View mode.

NOTE

Sivu latautuu ...

Yamaha UW10 Omistajan opas

Brändi: Yamaha

Malli: UW10

Tyyppi: Omistajan opas

Lataa PDF

raportti

muilla kielillä

polski: Yamaha UW10 Instrukcja obsługi
Türkçe: Yamaha UW10 El kitabı
English: Yamaha UW10 Owner's manual
čeština: Yamaha UW10 Návod k obsluze
svenska: Yamaha UW10 Bruksanvisning
русский: Yamaha UW10 Инструкция по применению
italiano: Yamaha UW10 Manuale del proprietario
Deutsch: Yamaha UW10 Bedienungsanleitung
português: Yamaha UW10 Manual do proprietário
dansk: Yamaha UW10 Brugervejledning
français: Yamaha UW10 Le manuel du propriétaire
español: Yamaha UW10 El manual del propietario
Nederlands: Yamaha UW10 de handleiding
română: Yamaha UW10 Manualul proprietarului

Yamaha UW10 Omistajan opas

Yamaha UW10 Omistajan opas

muilla kielillä

Liittyvät paperit

Muut asiakirjat