Black & Decker BDMOW1200 Ohjekirja

Kategoria
Toys
Tyyppi
Ohjekirja
www.blackanddecker.eu
3
5
7
4
6
8
12 2
9
10
BDMOW1200
2
3
5
7
9a
6
6
910
9a
9b
7
9a
9b
A
B
C D
E F
2
3
1
2
3
4
3
1
1
2
3
4
3
1
2
G
H
I J1 J2
K L
4
ENGLISH
(Original instructions)
11
1112
13
1112
13
11
1415
11
14
15
Intended use
Your BLACK+DECKER BDMOW1200 lawn mower has been
designed for mowing grass. This appliance is intended for
consumer use only.
Safety instructions
Warning! When using mains-powered
appliances, basic safety precautions,
including the following, should always be
followed to reduce the risk of re, electric
shock and personal injury.
u Read all of this manual carefully before
using the appliance.
M N
O P
Q
5
ENGLISH
(Original instructions)
u The intended use is described in this
manual. The use of any accessory
or attachment or the performance
of any operation with this appliance
other than those recommended in this
instruction manual may present a risk
of personal injury.
u Retain this manual for future
reference.
Training
u Read the instructions carefully. Be
familiar with the controls and the
proper use of the appliance.
u Never allow children or people
unfamiliar with these instructions to
use the machine. Local regulations
can restrict the age of the operator.
u Never operate the machine while
people, especially children, or pets are
nearby.
u Keep in mind that the operator or user
is responsible for accidents or hazards
occurring to other people or their
property.
Preparation
u While operating the machine always
wear substantial footwear and long
trousers.
Do not operate the machine when
barefoot or wearing open sandals.
Avoid wearing clothing that is loose
tting or that has hanging cords or ties.
u Thoroughly inspect the area where the
machine is to be used and remove all
objects which can be thrown by the
machine.
u Before using, always visually inspect
to see that the blade, blade bolt and
the blade assembly are not worn or
damaged. Replace worn or damaged
components in sets to preserve
balance. Replace damaged or
unreadable
labels.
u Before use check the supply and
extension cord for signs of damage or
aging. If the cord becomes damaged
during use, disconnect the cord
from the supply immediately. DO
NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY.
Do not use the machine if the cord is
damaged or worn.
u Wear safety glasses or goggles when
operating this tool.
Use a face or dust mask whenever
the operations take place in dusty
surroundings. Hearing protection
should be worn whenever the sound
level seems uncomfortable.
u Guard against electric shock.
Prevent body contact with earthed or
grounded surfaces (e.g. metal railings,
lampposts, etc.).
Operation
u Never operate the appliance with
defective guards or shields, or without
safety devices, for example deectors
and/or grass catchers, in place.
u Only use the appliance in daylight or
good articial light.
u Do not expose the appliance to rain.
6
ENGLISH
(Original instructions)
Do not use the appliance in damp or
wet conditions. Preferably do not use
the appliance in wet grass.
u Be sure of your footing, particularly on
slopes. Be aware that freshly cut grass
is damp and slippery. Do not work on
steep slopes.
u Work across the face of slopes, never
up and down. Take extreme caution
when changing direction on slopes.
u Do not mow excessively steep slopes.
u Walk, never run when using the
appliance. Do not pull the appliance
towards you or walk backwards when
using the appliance.
u Switch on the appliance according to
instructions and with your feet well
away from the blade.
u Do not start the machine when
standing in front of the discharge
opening.
u Do not tilt appliance when switching it
on, except if the appliance has to be
tilted for starting.
In that case, do not tilt the appliance
more than absolutely necessary and
lift only the part that is away from the
operator. Always ensure that both
hands are in the operating position
before returning the appliance to the
ground.
u Switch off the appliance and wait for
the blade assembly to stop running
if the appliance has to be tilted
for transportation when crossing
surfaces other than grass, and when
transporting the appliance to and from
the area to be mowed.
u Do not lift or carry the appliance until
the blade has come to a complete
standstill.
u Keep your hands and feet well away
from the blade.
u Do not put your hands or feet near or
under rotating parts.
u Keep away from discharge openings at
all times.
u Switch off, remove the plug from
the socket and ensure that moving
parts have stopped rotating before
leaving the appliance unattended
and before changing, cleaning or
inspecting any parts of the appliance
or clearing a blockage. After striking
a foreign object. Inspect the machine
for damage and make repairs before
restarting and operating the machine;
u If the appliance starts to vibrate
abnormally or if you hit a foreign
object, switch the appliance off and
remove the plug from the socket.
Check for any damage to the
appliance, replace or repair any
damaged parts, check for and tighten
any loose parts.
u Take care to keep the mains cable
away from the blade. Always be aware
of the position of the cable.
u The motor will continue to run for a few
seconds after switching the appliance
off. Never attempt to force the blade to
come to a standstill.
Maintenance and storage
u Before use, check the appliance for
damaged or defective parts.
7
ENGLISH
(Original instructions)
Check for misalignment and seizure
of moving parts, breakage of parts,
damage to guards and switches
and any other conditions that may
affect its operation. Ensure that the
appliance will operate properly and
perform its intended function. Never
use the appliance when any guard or
enclosure is damaged or not in place.
Do not use the appliance if any part is
damaged or defective. Do not use the
appliance if the switch does not turn it
on and off.
Have any damaged or defective parts
repaired or replaced by an authorised
repair agent.
u Check the cable frequently for
damage. If the cable is damaged, it
must be replaced by an authorised
repair agent in order to prevent a
hazard. Inspect extension cables
periodically. Replace a damaged
extension cable immediately.
u Keep all nuts, bolts and screws on
the appliance tight to ensure a safe
working condition.
u Check the grass collector for wear or
damage and replace it if necessary.
Never use the appliance without the
grass collector.
u Be careful during adjustment of the
machine to prevent entrapment of the
ngers between moving blades and
xed parts of the machine.
u When servicing the blades be aware
that, even though the power source is
switched off, the blades can still be
moved.
u When not in use, the appliance should
be stored in a dry place. Children
should not have access to stored
appliances.
u Always allow the machine to cool
down before storing.
u Ensure that only replacement cutting
means of the right type are used.
u Use only BLACK+DECKER
recommended spare parts and
accessories.
Additional safety instructions for
Lawnmowers
u Always use an approved extension
cable suitable for the power input of
this tool (see technical data). The
extensioncable must be suitable for
outdoor use and marked accordingly.
Up to 30 m of 1.5 mm2 HO5VV-F
extension cable can be used without
loss of product performance.
Before use, inspect the extension
cable for signs of damage, wear and
ageing. Replace the extension cable
if damaged or defective. When using
a cable reel, always unwind the cable
completely.
u Do not transport the machine while the
power source is running
u Firmly grip handle with both hands
when operating the lawn mower.
u If at any time it is felt necessary to tilt
the lawn mower, make sure that both
hands remain in the operating position
while the lawn mower is tilted.
8
ENGLISH
(Original instructions)
Keep both hands in the operating
position until the lawn mower is
returned to rest correctly on the
ground.
u Never wear radio or music
headphones while operating the lawn
mower.
u Never attempt to make a wheel height
adjustment while the motor is running
or while the safety key is in the switch
housing.
u If the lawn mower stalls, turn mower
off, wait for blade to stop, before
attempting to unclog the chute or
remove anything from under the deck.
u Keep hands and feet away from
cutting area.
u Keep blades sharp.
Always use protective gloves when
handling the lawn mower blade.
u If you are using the grass collector,
check it frequently for wear and
deterioration. If excessively worn,
replace with a new grass collector for
your safety.
u Use extreme caution when reversing
or pulling the lawn mower towards you.
u Do not put hands or feet near or under
the lawn mower.
Keep clear of the discharger opening
at all times.
u Clear the area where the lawn mower
is to be used of objects such as rocks,
sticks, wire, toys, bones etc., which
could be thrown by the blade.
Objects struck by the blade can cause
severe injury to persons.
Stay behind the handle when the
motor is running.
u Do not operate the lawn mower
barefooted or while wearing sandals.
Always wear substantial footwear.
u Do not pull lawn mower backward
unless absolutely necessary. Always
look down and behind before and
while moving backward.
u Never direct discharged material
toward anyone. Avoid discharging
material against a wall or obstruction.
Material may ricochet back toward the
operator. Release the start handle to
turn the lawn mower off and stop the
blade when crossing gravel surfaces.
u Do not operate the lawn mower
without the entire grass collector,
discharge guard, rear guard, or other
safety protective devices in place and
working. Periodically check all guards
and safety protective devices to
ensure they are in good working order
and will operate properly and perform
their intended function.
Replace a damaged guard or other
safety device before further use.
u Never leave a running lawn mower
unattended.
u Always release the bail bar to stop the
motor and wait until the blade comes
to a complete stop before cleaning the
lawn mower, removing the grass bag,
unclogging the discharge guard, when
leaving the lawn mower, or before
making any adjustments, repairs or
inspections.
9
ENGLISH
(Original instructions)
u Operate lawn mower only in daylight
or good articial light when objects in
the path of the blade are clearly visible
from the operating area of the lawn
mower.
u Do not operate the lawn mower while
under the inuence of alcohol or drugs,
or when your are tired or ill. Always
stay alert, watch what you are doing,
and use common sense.
u Avoid dangerous environments.
Never operate the lawn mower in
damp or wet grass, never use lawn
mower in the rain. Always be sure of
your footing, walk, never run.
u If the lawn mower should start to
vibrate abnormally, release the on/off
switch, wait for the blade to stop and
then check for the cause immediately.
Vibration is generally a warning of
trouble, see the troubleshooting guide
for advise in the case of abnormal
vibration.
u Always wear proper eye and
respiratory protection when operating
the lawn mower.
u The use of any accessory or
attachment not recommended for
use with this lawn mower could be
hazardous. Only use accessories
approved by BLACK+DECKER.
u Never overreach while operating the
lawn mower. Always be sure to keep
proper footing and balance at all times
while operating the lawn mower.
u Mow across the face of slopes, never
up and down.
Exercise extreme caution when
changing direction on slopes.
u Watch for holes, ruts, bumps, rocks or
other hidden objects. Uneven terrain
could cause a slip and fall accident.
Tall grass can hide obstacles.
u Do not mow on wet grass or
excessively steep slopes. Poor footing
could cause a slip and fall accident.
u Do not mow near drop-offs, ditches, or
embankments.
You could lose your footing or balance.
u Always allow the mower to cool down
before storing.
Pull the plug from the socket and pull
the battery pack from the machine. Make
sure that all moving parts have come to a
complete stop:
u Whenever you leave the machine;
u Before clearing a blockage;
u Before checking, cleaning or working
on the appliance.
Vibration
The declared vibration emission values
stated in the technical data and the
declaration of conformity have been
measured in accordance with a standard
test method provided by EN50636 and
may be used for comparing one tool with
another. The declared vibration emission
value may also be used in a preliminary
assessment of exposure.
Warning! The vibration emission value
during actual use of the power tool can
differ from the declared value depending
on the ways in which the tool is used.
10
ENGLISH
(Original instructions)
The vibration level may increase above
the level stated.
When assessing vibration exposure to
determine safety measures required by
2002/44/EC to protect persons regularly
using power tools in employment, an
estimation of vibration exposure should
consider, the actual conditions of use and
the way the tool is used, including taking
account of all parts of the operating
cycle such as the times when the tool is
switched off and when it is running idle in
addition to the trigger time.
Do not operate the tool if the vibration
registers as abnormal.
Safety of others
u This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge.
Unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety.
u Children must be supervised to
ensure that they do not play with the
appliance.
u After striking a foreign object. Inspect
the appliance for damage and make
repairs as necessary.
Residual risks
Additional residual risks may arise when
using the tool which may not be included
in the enclosed safety warnings.
These risks can arise from misuse,
prolonged use etc. Even with the
application of the relevant safety
regulations and the implementation of
safety devices, certain residual risks can
not be avoided. These include:
u Injuries caused by touching any
moving parts.
u Injuries caused by touching any hot
parts.
u Injuries caused when changing any
parts or accessories.
u Injuries caused by prolonged use
of the appliance. When using any
appliance for prolonged periods
ensure you take regular breaks.
u Impairment of hearing.
u Health hazards caused by breathing
dust developed when using your
tool (example:- working with wood,
especially oak, beech and MDF.)
u If operating the mower in a damp
location is unavoidable, use a residual
current device (RCD) with a tripping
current of not more than 30 mA.
Use of an RCD reduces the risk of
electric shock.
u Never pick up or carry an appliance
while the motor is running.
Warning symbols
The following warning symbols are found
on the appliance along with the date
code:
Warning! Read the manual prior
to operation.
11
ENGLISH
(Original instructions)
Do not expose the appliance to
rain or high humidity.
Always remove the plug from
the socket before inspecting
a damaged cable. Be careful
not to use your appliance if the
cable is damaged.
Beware of sharp blades.
Beware of ying objects. Keep
bystanders away from the
cutting area.
Keep the cable away from the
cutting blades.
The blades will continue to
rotate after the machine is
switched off.
Directive 2000/14/EC
guaranteed sound power
Electrical safety
Warning! This tool is double
insulated; therefore no earth
wire is required. Always
check that the power supply
corresponds to the voltage on
the rating plate.
u If the supply cord is damaged, it must
be replaced by the manufacturer or an
authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
u Electric safety can be further improved
by using a high sensitivity 30 mA
Residual Current Device (RCD).
96
Features
This appliance includes some or all of the following features.
1. Power button
2. Comfort grip handles
3. On/off switches
4. Upper handle
5. Handle knobs
6. Lower handle
7. Grass box handle
8. Carrying handle
9. Grass collection box
10. Rear ap
Assembly
Warning! Before assembly, make sure that the appliance is
switched off and unplugged.
Assembling the grass collection box (g. A, B
and C)
The grass box requires assembly before use and comes in 3
pieces.
u Clip the handle (7) into the lid (9a) of the grass box
(g. B). The handle will only t one way round.
u Align the lid (9a) onto the base of grass collection box
(9b). Ensure that the guides are aligned (g. C)
Note: Take extra care when aligning the 2 clips at the rear of
the grass collection box.
u Push down on the lid to secure all clips. Begin at the back
and ensure that all clips are securely located.
Fitting the lower handle (g. D)
u Insert the ends of the lower handles (6) into the
corresponding holes in the mower.
u Press the handle down as far as it will go.
u Secure the handle using the screws.
Assembling the upper handle (g. E)
u Fit the upper handle (4) to the lower handle (6) using the
knobs (5), washers and screws as shown.
Note: The upper handle can be xed in 2 different height
positions.
Fitting the grass collection box (g. F)
u Lift the ap (10) and place the grass collection box (9)
over the lugs.
Proper Hand Position (Fig. G)
Warning! To reduce the risk of serious personal injury,
ALWAYS use proper hand position as shown.
Warning!: To reduce the risk of serious personal injury,
ALWAYS hold securely in anticipation of a sudden
reaction.
12
ENGLISH
(Original instructions)
Proper hand position requires one hand on each of the
comfort grip handles ( 2 ).
Adjusting the height of cut (g. H)
Warning! Ensure the blade has completely stopped and
disconnect the appliance from the mains.
The height of cut is adjusted by altering the height of all the
wheels, there are 3 positions to choose from.
u Remove the grass collection box (9).
u Turn the lawnmower upside down.
u Take hold of a wheel and push/pull the axle from its
current location.
u Move the wheel up/down into the next available location.
Note: Adjust one wheel at a time. Adjust one height position
at a time.
Switching on and off (g. I)
Switching on
u Push the power button (1).
u Pull the right or left ON/OFF switch (3) towards the handle.
Switching off
u Release ON/OFF switches (3).
Warning! Never attempt to lock a switch in the on position.
Mowing (g. J1 & J2)
We recommend to use your mower as outlined in this section
in order to achieve optimum results and to reduce the risk of
cutting the mains cable.
u Place the bulk of the mains cable on the lawn, close to the
starting point (position 1 in g. J1).
u Switch the appliance on as described above.
u Proceed as shown in g. J1
u Move from position 1 to position 2.
u Turn right and proceed towards position 3.
u Turn left and move towards position 4.
u Repeat the above procedure as required.
Warning! Do not work towards the cable as shown in g. J2.
Up to edge cutting (g. K, L)
Up to edge cutting allows you to cut grass right up to the edge
of a wall or fence (g K).
Up to edge cutting allows you to accurately cut grass right up
to the edge of your lawn (g L).
u With the lawnmower parallel with the edge of your lawn,
push the lawnmower along the edge of the lawn. Ensure
that the edge of the mower is slightly over the edge of
your lawn (g.L).
Removing Blade (Fig. M, N)
Note: The BDMOW1200 uses the BLACK+DECKER new
winged blade (Cat # A6319) for improved collection.
Warning! Ensure the blade has completely stopped
and disconnect the mower from the power source.
u Cut a piece of 2x4 wood (12) 305mm to keep blade from
turning while removing ange nut.
u Turn the appliance onto its side. Wear gloves and proper
eye protection. Be careful of sharp edges of blade.
u Position piece of wood (12) to keep blade from turning
as shown in Fig. M.
u Use a 14mm wrench (13) to loosen and remove the
blade bolt by turning counterclockwise.
u Pull off blade (11), blade insulator (15), as shown in
Fig. N. Examine all pieces for damage and replace if
necessary.
Installing Blade (Fig. O)
u Place blade insulator (15) then the blade (11) onto bolt
shaft with the lettering on the blade facing out, and place
the blade bolt onto the bolt shaft.
u Tighten the blade bolt as rmly as possible by hand.
u Position piece of wood (12) to keep blade from turning
as shown in Fig. O.
u Use a 14mm wrench to securely tighten the blade
bolt by turning the wrench clockwise.
Blade sharpening
Keep blade sharp for best mower performance. A dull blade
does not cut grass cleanly. Use proper eye protection while
removing, sharpening, and installing blade. Sharpening the
blade twice during a mowing season is usually sufcient under
normal circumstances.
Sand causes the blade to dull quickly. If your lawn has sandy
soil, more frequent sharpening may be required.
Note: Replace bent or damaged blade immediately.
When sharpening the blade:
u Make sure blade remains balanced.
u Sharpen blade at the original cutting angle.
u Sharpen cutting edges on both ends of blade, removing
equal amounts of material from both ends.
To sharpen blade in a vice (g. P)
u Be sure the blade has stopped and the mower is
unplugged before removing the blade.
u Remove blade from mower. See instructions for removing
and installing blade.
u Secure blade (11) in a vice (14).
u Wear proper eye protection and gloves and be careful not
to cut yourself.
Carefully le the cutting edges of the blade with a ne
tooth le (15) or sharpening stone, maintaining the angle
of the original cutting edge. Check balance of blade. See
instructions for blade balancing.
u Replace blade on mower and tighten securely.
13
ENGLISH
(Original instructions)
Blade balancing (g. Q)
Check balance of the blade (11) by placing centre hole in
the blade over a nail or round shank screwdriver, clamped
horizontally in a vice. If either end of the blade rotates
downward, le along the sharp edge of that dropping end.
Blade is properly balanced when neither end drops.
Lubrication
No lubrication is necessary. Do not oil the wheels. They have
plastic bearing surfaces which require no lubrication.
Cleaning
Turn the mower off and let the blade come to a stop. Use only
mild soap and a damp cloth to clean the mower. Clean out any
clippings which may have accumulated on the underside of
the deck. After several uses, check all exposed fasteners for
tightness.
Preventing corrosion
Fertilizers and other garden chemicals contain agents which
greatly accelerate the corrosion of metals.
If you mow in areas where fertilizers or chemicals have been
used, the mower should be cleaned immediately afterward as
follows:
Turn the mower off and unplug mower. Wipe all exposed parts
with a damp cloth.
Maintenance
Your BLACK+DECKER corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool/appliance care and regular
cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
u Switch off and unplug the appliance/tool.
u Or run the battery down completely if it is integral and then
switch off.
u Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
u Regularly clean the ventilation slots in your tool/appliance
and charger using a soft brush or dry cloth.
u Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
u Regularly use a blunt scraper to remove grass and dirt
from the underneath of the guard.
Troubleshooting
If your appliance seems not to operate properly, follow the
instructions below. If this does not solve the problem, please
contact your local BLACK+DECKER repair agent.
Warning! Before proceeding, release the bail bar to turn
mower off and wait for the blade to stop.
Problem Possible cause Possible solution
Mower will
not start.
Cord is not
plugged in.
Plug mower into a work-
ing outlet.
Circuit fuse is
blown.
Replace circuit fuse. (If
the product repeatedly
causes the circuit fuse
to blow, discontinue use
immediately and have
itserviced by an author-
ised BLACK+DECKER
service center.
Cord or switch
is damaged.
Have cord or switch
replaced at an author-
ised BLACK+DECKER
service center.
Grass too long. Increase the height of
cut and move machine
to shorter grass to start.
Machine func-
tions intermit-
tently.
Thermal cut out
activated.
Allow motor to cool and
increase height of cut.
Machine
leaves ragged
nish or mo-
tor labours.
Height of cut
too low.
Increase height of cut.
Cutting blade
blunt.
Replace the blade.
Underside
of machine
clogged.
Check underneath the
machine and clear out
as necessary (always
wear heavy duty gloves)
Blade tted
upside down.
Ret blade correctly.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
BDMOW1200
Voltage
V
AC
230
Power inpurt
W 1200
No-Load
speed
min
-1
3500
(Übersetzung der ursprünglichen
Anweisungen)
DEUTSCH
14
ENGLISH
(Original instructions)
(Übersetzung der ursprünglichen
Anweisungen)
DEUTSCH
BDMOW1200
Height
adjustment
mm 23 - 63
Blade length
mm 320
Weight Kg
9.35
Hand/arm weighted vibration value:
= 2.5m/s
2
, uncertainty (K) = 1.5m/s
2
.
Sound pressure level at the operator's ear:
L
PA
: 78.5dB(A); K= 4.0dB(A)
Sound power level L
WA
: 93dB(A); K= 3dB(A)
EC declaration of conformity
MACHINERY DIRECTIVE
OUTDOOR NOISE DIRECTIVE
%
BDMOW1200 lawn mower
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 60335-1:2012 + A11:2014,
EN 60335-2-77:2010
2000/14/EC, Lawn Mower, L < 50cm, Annex VI,
DEKRA Certication B.V. Meander 1051 / P.O. Box 5185
6825 MJ ARNHEM / 6802 ED ARNHEM Netherlands.
Level of accoustic power according to 2000/14/EC (Article 12,
Annex III, L< 50cm):
measured sound power level L
WA
: 93dB(A); K=3dB(A).
guaranteed sound power level L
WA
: 96dB(A).
These products also comply with directive 2014/30/EU,
2011/65/EU. For more information, please contact Black &
Decker at the following address or refer to the back of the
manual.
The undersigned is responsible for compilation of the technical
le and makes this declaration on behalf of Black & Decker.
Becky Cotsworth
Director – Outdoor Products Group
Black & Decker Europe, 270 Bath Road, Slough,
Berkshire, SL1 4DX
United Kingdom
27/10/2017
Guarantee
Black & Decker is condent of the quality of its products
and offers consumers a 24 month guarantee from the date
of purchase. This guarantee is in addition to and in no way
prejudices your statutory rights. The guarantee is valid within
the territories of the Member States of the European Union
and the European Free Trade Area.
To claim on the guarantee, the claim must be in accordance
with Black & Decker Terms and Conditions and you will need
to submit proof of purchase to the seller or an authorised
repair agent. Terms and conditions of the Black & Decker 2
year guarantee and the location of your nearest authorised
repair agent can be obtained on the Internet at www.2helpU.
com, or by contacting your local Black & Decker ofce at the
address indicated in this manual.
Please visit our website www.blackanddecker.co.uk to register
your new Black & Decker product and receive updates on new
products and special offers.
Verwendungszweck
Ihr BLACK+DECKER BDMOW1200-Rasenmäher wurde
zum Rasenmähen entwickelt. Dieses Gerät ist nicht für den
gewerblichen Einsatz vorgesehen.
Sicherheitshinweise
Warnung! Beachten Sie beim Umgang
mit netzstrombetriebenen Geräten stets
die grundlegenden Sicherheitshinweise,
die im Folgenden beschrieben werden.
Dadurch verhindern Sie Brände,
Stromschläge und Personenschäden.
u Lesen Sie diese Anleitung vollständig
und aufmerksam durch, bevor Sie das
Gerät zum ersten Mal verwenden.
u Der vorgesehene Verwendungszweck
ist in dieser Anleitung beschrieben.
Bei Verwendung von Zubehör oder
Anbauteilen, die nicht in dieser
Anleitung empfohlen werden, sowie
bei der Verwendung des Geräts
in Abweichung von den in dieser
Anleitung beschriebenen Verfahren
besteht Verletzungsgefahr.
15
(Übersetzung der ursprünglichen Anweisungen)
DEUTSCH
u Bewahren Sie diese Anleitung auf.
Schulung
u Lesen Sie die Bedienungsanleitung
sorgfältig durch. Machen Sie sich
mit den Bedienelementen und dem
ordnungsgemäßen Gebrauch des
Geräts vertraut.
u Das Gerät darf nicht von Kindern
oder Personen, die die vorliegenden
Anleitungen nicht gelesen haben,
genutzt werden. Beachten Sie lokale
Richtlinien, in denen unter Umständen
ein Mindestalter für den Bediener
festgelegt ist.
u Es sollte stets ein Sicherheitsabstand
zu anderen Personen, insbesondere
Kindern, und Haustieren eingehalten
werden.
u Beachten Sie, dass der Bediener bzw.
Benutzer für eventuelle Personen-
oder
Sachschäden verantwortlich ist.
Zubereitung
u Tragen Sie stets feste Schuhe und
eine lange Hose, wenn Sie mit
dem Gerät arbeiten. Betreiben Sie
dieses Gerät nie barfuß oder in
offenen Sandalen. Tragen Sie keine
lose Kleidung oder Kleidung mit
herabhängenden Bändern.
u Kontrollieren Sie stets den Bereich, in
dem das Gerät verwendet werden soll,
und entfernen Sie alle Gegenstände,
die von dem Gerät umhergeschleudert
werden können.
u Überzeugen Sie sich vor der
Verwendung, dass Mähmesser,
Messerschraube und Mäheinheit
weder abgenutzt noch beschädigt
sind. Ersetzen Sie bei abgenutzten
oder beschädigten Bestandteilen
den entsprechenden Satz, sodass
nicht neue und alte Komponenten
gleichzeitig verwendet werden.
Ersetzen Sie beschädigte oder
unlesbare Aufkleber.
u Prüfen Sie vor der Inbetriebnahme
Netz- und Verlängerungskabel auf
Beschädigungen und Verschleiß.
Trennen Sie das Gerät sofort vom
Stromnetz, wenn das Kabel während
des Betriebs beschädigt wird.
BERÜHREN SIE DAS KABEL NICHT,
SOLANGE DER STECKER NOCH IN
DER NETZSTECKDOSE STECKT.
Verwenden Sie das Gerät nicht, wenn
das Kabel beschädigt oder abgenutzt
ist.
u Tragen Sie eine Schutzbrille,
wenn Sie mit dem Gerät arbeiten.
Verwenden Sie eine Atemschutz-
oder Staubmaske, wenn Sie in einer
staubigen Umgebung arbeiten. Wenn
der Schallpegel eine unangenehme
Stärke erreicht, sollten Sie einen
Gehörschutz tragen.
u Schützen Sie sich vor einem
Stromschlag. Vermeiden Sie
Körperkontakt mit geerdeten
Gegenständen (z. B. Metallgeländern,
Laternenpfählen usw.).
16
(Übersetzung der ursprünglichen Anweisungen)
DEUTSCH
Betrieb
u Betreiben Sie die Maschine nie
mit defekten oder fehlenden
Schutzvorrichtungen, wie z. B.
Deektoren und/oder Grasfangkorb.
u Betreiben Sie das Gerät nur bei
Tageslicht oder bei ausreichender
Beleuchtung.
u Schützen Sie das Gerät vor Regen.
Betreiben Sie das Gerät nie in feuchter
oder nasser Umgebung. Vermeiden
Sie es, das Gerät auf feuchtem Rasen
zu betreiben.
u Achten Sie auf Standfestigkeit,
insbesondere bei Arbeiten an Hängen.
Achten Sie darauf, dass frisch
gemähtes Gras feucht und rutschig
sein kann. Arbeiten Sie nie an steilen
Hängen.
u Schieben Sie das Gerät immer parallel
zum Hang, nie den Hang hinauf oder
hinunter. Arbeiten Sie mit äußerster
Vorsicht, wenn Sie an Hängen die
Richtung wechseln.
u Mähen Sie nicht an steilen Hängen.
u Betreiben Sie das Gerät nur im Gehen,
nie im Rennen. Ziehen Sie das Gerät
nicht zu sich heran. Gehen Sie mit
dem Gerät nie rückwärts.
u Schalten Sie das Gerät den
Anweisungen entsprechend ein.
Achten Sie darauf, dass Ihre Füße
einen Sicherheitsabstand zum Messer
einhalten.
u Starten Sie das Gerät nicht, wenn Sie
sich vor der Auswurföffnung benden.
u Kippen Sie das Gerät beim Anschalten
nicht, es sei denn, das Gerät muss
zum Starten gekippt werden. Kippen
Sie das Gerät in diesem Fall nicht
mehr als nötig. Heben Sie stets den
von Ihnen entfernten Teil des Geräts
an. Bringen Sie beide Hände in die
Betriebsposition, bevor Sie das Gerät
wieder auf den Boden setzen.
u Schalten Sie in folgenden Situationen
das Gerät stets aus, und warten Sie,
bis die Mäheinheit zum Stillstand
gekommen ist: wenn das Gerät für den
Transport gekippt werden muss, wenn
Sie Oberächen überqueren, die nicht
aus Gras bestehen, und wenn Sie das
Gerät zu der zu mähenden Fläche und
von dort weg transportieren.
u Warten Sie stets, bis das Messer
vollständig zum Stillstand gekommen
ist, bevor Sie das Gerät anheben oder
tragen.
u Halten Sie Hände und Füße vom
Messer fern.
u Bringen Sie nie Hände und Füße in
die Nähe von rotierenden Geräteteilen
oder unter rotierende Geräteteile.
u Halten Sie jederzeit einen
Sicherheitsabstand zu den
Auswurföffnungen ein.
u Schalten Sie das Gerät ab, trennen
Sie es von der Stromversorgung,
und stellen Sie sicher, dass alle
beweglichen Teile zum Stillstand
gekommen sind, bevor Sie das
Gerät unbeaufsichtigt stehen lassen,
reinigen, inspizieren, Geräteteile
auswechseln oder eine Blockade
17
(Übersetzung der ursprünglichen Anweisungen)
DEUTSCH
entfernen. Nach dem Überfahren eines
Fremdkörpers. Kontrollieren Sie das
Gerät auf Beschädigungen, bevor sie
es wieder in Betrieb nehmen.
u Wenn das Gerät ungewöhnlich vibriert
oder mit einem Fremdkörper in
Berührung gekommen ist, schalten Sie
das Gerät aus, und trennen Sie es von
der Stromversorgung. Kontrollieren
Sie das Gerät auf Beschädigungen,
ersetzen bzw. reparieren Sie
beschädigte Teile, kontrollieren Sie, ob
lose Teile vorhanden sind, und ziehen
Sie diese ggf. fest.
u Achten Sie darauf, dass das
Stromkabel nicht in die Nähe des
Messers gerät. Achten Sie stets auf
die Lage des Stromkabels.
u Der Motor läuft nach dem Abschalten
einige Sekunden lang weiter.
Versuchen Sie nie, das Messer mit
Gewalt zum Stillstand zu bringen.
Wartung und Aufbewahrung
u Prüfen Sie das Gerät vor der
Verwendung auf beschädigte oder
defekte Teile. Überprüfen Sie, ob
bewegliche Teile falsch ausgerichtet
oder falsch angebracht und ob Teile,
Schutzvorrichtungen oder Schalter
beschädigt sind. Achten Sie auch
auf andere Beschädigungen, die den
Betrieb des Geräts beeinträchtigen
können. Stellen Sie sicher, dass das
Gerät ordnungsgemäß funktioniert.
Betreiben Sie das Gerät nie,
wenn Schutzvorrichtungen oder
Abdeckungen beschädigt oder nicht
vorhanden sind. Betreiben Sie das
Gerät nicht, wenn Teile beschädigt
oder defekt sind. Betreiben Sie das
Gerät nicht, wenn der Schalter zum
Ein- und Ausschalten nicht funktioniert.
Lassen Sie beschädigte oder defekte
Teile in einer Vertragswerkstatt
reparieren oder austauschen.
u Überprüfen Sie das Kabel regelmäßig
auf Beschädigungen. Wenn das
Kabel beschädigt ist, muss es in
einer Vertragswerkstatt repariert oder
ausgetauscht werden. Es können
sonst Unfälle verursacht werden.
Überprüfen Sie Verlängerungskabel
regelmäßig auf Beschädigungen.
Ersetzen Sie ein beschädigtes
Verlängerungskabel umgehend.
u Ziehen Sie alle Muttern, Bolzen und
Schrauben am Gerät fest, damit das
Gerät sicher arbeitet.
u Überprüfen Sie den Grasfangbehälter
regelmäßig auf Abnutzung oder
Beschädigungen, und ersetzen Sie
ihn gegebenenfalls. Betreiben Sie das
Gerät nie ohne den Grasfangbehälter.
u Gehen Sie bei Einstellungen am Gerät
vorsichtig vor, um zu verhindern, dass
Ihre Finger zwischen den Messern
und feststehenden Teilen des Geräts
eingeklemmt werden.
u Beachten Sie bei Wartungsarbeiten
an den Messern, dass sich diese auch
ohne Stromversorgung bewegen.
u Bewahren Sie das Gerät bei
Nichtgebrauch an einem trockenen Ort
auf. Kinder sollten keinen Zugang zu
aufbewahrten Geräten haben.
18
(Übersetzung der ursprünglichen Anweisungen)
DEUTSCH
u Lassen Sie das Gerät vor der
Lagerung stets abkühlen.
u Stellen Sie sicher, dass Ersatzmesser
dem benötigten Typ entsprechen.
u Verwenden Sie nur von
BLACK+DECKER empfohlene Ersatz-
und Zubehörteile.
Zusätzliche Sicherheitshinweise
für Rasenmäher
u Verwenden Sie ausschließlich
geprüfte Verlängerungskabel, die für
die Leistungsaufnahme dieses Geräts
ausgelegt sind (siehe „Technische
Daten“). Das Verlängerungskabel
muss für die Verwendung im
Außenbereich geeignet und
entsprechend gekennzeichnet sein.
Es kann ein 1,5 mm²-HO5VV-F-
Verlängerungskabel mit einer Länge
von bis zu 30 m verwendet werden,
ohne dass die Leistung des Geräts
beeinträchtigt wird. Prüfen Sie vor
der Inbetriebnahme das Netzkabel
auf Verschleiß und Beschädigungen.
Wechseln Sie beschädigte oder
fehlerhafte Verlängerungskabel
aus. Wenn Sie eine Kabeltrommel
verwenden, wickeln Sie das Kabel
vollständig ab.
u Transportieren Sie die Maschine nicht,
während die Stromversorgung läuft.
u Halten Sie den Rasenmäher während
des Betriebs sicher mit beiden Händen
fest.
u Halten Sie beide Hände in der
Betriebsposition, wenn der
Rasenmäher gekippt werden muss.
Halten Sie beide Hände in der
Betriebsposition bis der Rasenmäher
wieder ordnungsgemäß auf dem
Boden abgestellt wurde.
u Tragen Sie beim Rasenmähen keine
Kopfhörer zum Musikhören.
u Passen Sie niemals die Höhe der
Räder an, während der Motor läuft
oder sich der Sicherheitsschlüssel im
Schloss bendet.
u Lassen Sie den Bügelschalter los, um
den Rasenmäher auszuschalten, wenn
dieser blockiert. Warten Sie, bis das
Messer zum Stillstand gekommen ist,
bevor Sie versuchen, die Verstopfung
zu beseitigen oder Gegenstände von
der Unterseite zu entfernen.
u Halten Sie Hände und Füße vom
Schnittbereich fern.
u Halten Sie die Sägeblätter scharf.
Tragen Sie beim Umgang mit dem
Messer des Rasenmähers stets
Schutzhandschuhe.
u Wenn der Grasfangbehälter
verwendet wird, muss dieser
regelmäßig auf Abnutzungen und
Beschädigungen überprüft werden.
Wechseln Sie aus Sicherheitsgründen
den Grasfangbehälter bei starker
Abnutzung aus.
u Seien Sie besonders vorsichtig, wenn
Sie den Rasenmäher wenden oder in
Ihre Richtung ziehen.
u Bringen Sie Hände oder Füße
nicht in die Nähe bzw. unter den
Rasenmäher. Halten Sie jederzeit
einen Sicherheitsabstand zur
Auswurföffnung.
19
(Übersetzung der ursprünglichen Anweisungen)
DEUTSCH
u Entfernen Sie Steine, Äste, Drähte,
Spielzeuge, Knochen usw., die in das
Messer geraten könnten, aus dem
Bereich, in dem der Rasenmäher
verwendet wird. Objekte, die in das
Messer geraten, können ernsthafte
Verletzungen verursachen. Bleiben Sie
hinter dem Griff, wenn der Motor läuft.
u Betreiben Sie den Rasenmäher weder
barfuß noch mit Sandalen. Tragen Sie
jederzeit festes Schuhwerk.
u Ziehen Sie den nur Rasenmäher
nur rückwärts, wenn dies unbedingt
erforderlich ist. Achten Sie stets auf
den Boden und den Bereich hinter
Ihnen, bevor und während Sie sich
rückwärts bewegen.
u Achten Sie darauf, dass das Material
nicht in Richtung von Personen
ausgeworfen wird. Achten Sie
darauf, dass das Material nicht in
Richtung von Wänden oder anderen
Gegenständen ausgeworfen wird.
Das Material kann gegen den
Bediener zurückgeschleudert werden.
Lassen Sie den Startgriff los, und
warten Sie, bis das Messer zum
Stillstand gekommen ist, bevor Sie
Kiesoberächen überqueren.
u Betreiben Sie den Rasenmäher nicht
ohne angebrachten und intakten
Grasfangbehälter, Auswurfschutz,
hinteren Schutz und andere
Schutzvorrichtungen. Überprüfen
Sie regelmäßig alle Schutz- und
Sicherheitsvorrichtungen auf deren
ordnungsgemäße Funktion.
Ersetzen Sie beschädigte Schutz-
und Sicherheitsvorrichtungen vor der
weiteren Verwendung.
u Lassen Sie den eingeschalteten
Rasenmäher niemals unbeaufsichtigt.
u Lassen Sie stets den Bügelgriff
los, warten Sie, bis das Messer
zum Stillstand gekommen ist,
wenn Sie den Rasenmäher
reinigen, den Grasfangbeutel
entfernen, Verstopfungen aus der
Auswurföffnung beseitigen, den
Rasenmäher unbeaufsichtigt lassen
bzw. Anpassungen vornehmen
oder Reparaturen und Inspektionen
ausführen.
u Betreiben Sie den Rasenmäher nur
bei Tageslicht oder bei ausreichender
Beleuchtung, sodass Gegenstände auf
dem Schnittweg vom Betriebsbereich
des Rasenmähers aus deutlich
sichtbar sind.
u Betätigen Sie den Rasenmäher
nicht, wenn Sie unter Alkohol- oder
Drogeneinuss stehen oder wenn
Sie müde oder krank sind. Bleiben
Sie immer aufmerksam, achten Sie
darauf, was sie tun und setzen Sie den
gesunden Menschenverstand ein.
u Meiden Sie gefährliche Umgebungen.
Betreiben Sie den Rasenmäher nicht
in feuchtem oder nassem Gras.
Verwenden Sie den Rasenmäher
keinesfalls im Regen. Achten Sie auf
Trittsicherheit. Betreiben Sie das Gerät
nur im Gehen, nie rennend.
20
(Übersetzung der ursprünglichen Anweisungen)
DEUTSCH
u Lassen Sie den Ein-/Ausschalter
los, warten Sie, bis das Messer
zum Stillstand gekommen ist, wenn
Sie ungewöhnliche Vibrationen des
Rasenmähers bemerken, und prüfen
Sie die Ursache. Im Allgemeinen
deutet Vibration auf ein Problem
hin. Im Fall einer ungewöhnlichen
Vibration des Geräts nden Sie
unter „Problembehebung“ weitere
Informationen.
u Tragen Sie beim Betreiben des
Rasenmähers stets geeigneten Augen-
und Atemschutz.
u Der Gebrauch von Zubehörteilen
oder Zusätzen, die nicht für den
Gebrauch mit dem Rasenmäher
empfohlen werden, kann gefährlich
sein. Verwenden Sie nur von
BLACK+DECKER genehmigtes
Zubehör.
u Beugen Sie sich nicht zu weit nach
vorne, wenn Sie den Rasenmäher
betreiben. Achten Sie während des
Betriebs des Rasenmähers stets
auf Ihre Standfestigkeit und Ihr
Gleichgewicht.
u Mähen Sie stets parallel zum Hang,
nie den Hang hinauf oder hinunter.
Arbeiten Sie mit äußerster Vorsicht,
wenn Sie an Hängen die Richtung
wechseln.
u Achten Sie auf Löcher, Wurzeln,
Bodenunebenheiten, Steine und
andere verborgene Objekte. Unebenes
Gelände kann zu Unfällen durch
Stürze führen. Hohes Gras kann
Hindernisse verbergen.
u Mähen Sie nie nasses Gras.
Mähen Sie nicht an steilen Hängen.
Mangelnde Standfestigkeit kann zu
Unfällen durch Stürze führen.
u Mähen Sie nicht in der Nähe von
Abhängen, Gräben oder Böschungen.
Es besteht die Gefahr, dass Sie
ausrutschen oder das Gleichgewicht
verlieren.
u Lassen Sie den Rasenmäher vor der
Lagerung stets abkühlen.
Ziehen Sie den Stecker aus der
Steckdose und ziehen Sie den Akku
aus dem Gerät heraus. Achten Sie
darauf, dass alle beweglichen Teile zum
Stillstand gekommen sind:
u Wann immer Sie die Maschine
verlassen;
u Bevor Blockaden entfernt werden;
u Vor dem Überprüfen, Reinigen oder
Warten des Geräts.
Vibration
Die in den Abschnitten "Technische
Daten" und "EU-Konformitätserklärung"
angegebenen Werte für die
Vibrationsemission wurden mit einer
Standard-Prüfmethode nach EN50636
ermittelt und können zum Vergleich
verschiedener Geräte herangezogen
werden. Außerdem kann mit Hilfe dieses
Werts die Belastung bei Verwendung des
Geräts schon im Voraus eingeschätzt
werden.
Warnung! Die bei Verwendung des
Geräts auftretende Vibrationsemission
hängt von der Art des Gerätegebrauchs
ab und kann dementsprechend von
1 / 1

Black & Decker BDMOW1200 Ohjekirja

Kategoria
Toys
Tyyppi
Ohjekirja