Yamaha MOXF8 Ohjekirja

Contents

Using the MOXF6/MOXF8 Manuals ............................. 2

Basic Structure 3

Functional Blocks.........................................................3

Tone Generator Block .................................................. 4

A/D Input Block .............................................................8

Sequencer Block...........................................................9

Arpeggio Block ........................................................... 11

Controller Block..........................................................17

Effect Block .................................................................18

Internal Memory ..........................................................22

Reference 24

Voice Mode.................................................................. 25

Supplementary Information ............................................ 53

Voice Category List ..................................................................53

Setting examples of the Destination.........................................53

Functions of Knobs 1 – 8..........................................................54

Performance Mode .....................................................55

Supplementary Information ............................................ 74

Performance Category List ......................................................74

Functions of Knobs 1 – 8..........................................................74

Song Mode .................................................................. 76

Supplementary Information ............................................ 97

Song Playback Types ..............................................................97

Song Track Loop – setting example.........................................99

Punch In/Out (Type = punch).................................................100

Basic Procedure in the Song Job Mode ................................100

Pattern Mode .............................................................101

Supplementary Information .......................................... 112

Pattern Playback Types .........................................................112

Loop Recording (Pattern).......................................................113

Mixing Mode ..............................................................114

Supplementary Information .......................................... 124

Editing a Performance by using the Knobs............................124

Creating an Arpeggio.............................................................125

Storing the Mixing settings as a Mixing Template..................126

Master Mode.............................................................. 128

Remote Mode ............................................................ 133

Utility Mode ............................................................... 140

Quick Setup............................................................... 151

File Mode ................................................................... 153

Supplementary Information ..........................................160

File/Folder selection............................................................... 160

Playing back a SMF (Standard MIDI file) from

USB flash memory ................................................................. 160

Formatting a USB flash memory device ................................ 161

Using iOS Applications 162

Appendix 163

About MIDI................................................................. 163

Yamaha Corp. reserves the right to update or modify this manual at any time without prior notice. The most up-to-date version is

freely available for download from the following web page.

http://download.yamaha.com/

Reference Manual

MOXF6/MOXF8 Reference Manual

2

Using the MOXF6/MOXF8 Manuals

Your MOXF6/MOXF8 synthesizer comes with four different reference guides — the Owner’s Manual, the Reference Manual (this document), the

Synthesizer Parameter Manual, and the Data List. While the Owner’s Manual is packaged together with the synthesizer as a hardcopy booklet,

this Reference Manual, Synthesizer Parameter Manual, and the Data List are provided as PDF documents on the bundled CD-ROM.

Owner’s Manual (hardcopy booklet)

Describes how to set up your MOXF6/MOXF8 and how to perform basic operations.

This manual explains the following operations.

• Playing in the Voice mode

• Creating a new Performance by using your favorite Voice (Performance Creator)

• Playing in the Performance mode

• Using a microphone and sounds from other audio devices

• Creating an original Song

• Making your own Patterns

• Connecting to a computer

• Using as a master keyboard (Master mode)

• Making global system settings (Utility mode)

• Saving/loading data (File mode)

• Installing optional hardware

Reference Manual (this PDF document)

Describes the internal design of your MOXF6/MOXF8 and the various parameters that can be adjusted and set.

Synthesizer Parameter Manual (PDF document)

Explains the voice parameters, effect types, effect parameters, and MIDI messages that are used for synthesizers incorporating

the Yamaha AWM2 sound generators. Read the Owner’s Manual and Reference Manual first and then use this parameter

manual, if necessary, to learn more about parameters and terms that relate to Yamaha synthesizers.

Data List (PDF document)

Provides lists such as the Waveform List, Performance List, Effect Type List, Arpeggio Type List, as well as reference materials

such as the MIDI Implementation Chart and Remote Control Function List.

Using the Reference Manual

• Using the mode tabs along the upper part of each page from the

Reference section, you can jump to the page for parameter

explanations of the corresponding mode. The list indicated at the

right of each page in the selected mode is equivalent to the

function tree. By clicking the desired item from this list, you can

jump to the page for the corresponding function’s explanations.

• You can click on any page number from the Table of Contents or

within descriptive text to jump to the corresponding page.

• You can also click on desired items and topics you want to refer to

in the “Bookmarks” index to the left of the main window, and jump to

the corresponding page. (Click the “Bookmarks” tab to open the

index if it is not displayed.)

• If you want to find information on a specific topic, function or

feature, select “Find” or “Search” from the Adobe Reader “Edit”

menu and enter a key word to locate the related information

anywhere in the document.

NOTE

The most-recent version of Adobe

®

Reader

®

can be downloaded from

the following web page.

http://www.adobe.com/products/reader/

NOTE The names and positions of menu items may vary according to the version of Adobe Reader being used.

Information

• The illustrations and LCD screens as shown in this Reference Manual are for instructional purposes only, and may appear somewhat different

from those on your instrument.

• All other trademarks are the property of their respective holders.

PERF SONG PATTERN MIX MASTER REMOTE UTILITY

QUICK SET

FILEVOICE

Voice Mode

Voi c e Pl a y

[F1] PLAY

[F3] PORTA

[F4] EG

[F5] ARP ED

[F6] EFFECT

Arpeggio Edit

[F2] TYPE

[F3] MAIN

[F4] LIMIT

[F5] PLAY FX

Normal Voice Edit

Common Edit

[F1] GENERAL

[F2] OUTPUT

[F3] EQ

[F4] CTL SET

[F5] LFO

[F6] EFFECT

Element Edit

[F1] OSC

[F2] PITCH

[F3] FILTER

[F4] AMP

[F5] LFO

[F6] EQ

Drum Voice Edit

Common Edit

[F1] GENERAL

[F2] OUTPUT

[F3] EQ

[F4] CTL SET

[F6] EFFECT

Key Edit

[F1] OSC

[F2] PITCH

[F3] FILTER

[F4] AMP

[F6] EQ

Voi c e Jo b

[F1] INIT

[F2] RECALL

[F3] COPY

Voice Mode

The Voice mode is used for selecting, playing, and editing desired Voices. This section explains each parameter in the

four types (Voice Play, Normal Voice Edit, Drum Voice Edit, and Voice Job). Note that available parameters for editing

differ depending on the Voice types (Normal Voice and Drum Voice).

Voice Play

Voice Play is the main “portal” by which you enter the Voice mode, and it is here where you select and play a Voice.

Some of the Voice settings can also be edited in this mode.

Voice Play display

Voice Bank

Voice Number

Indicates the currently selected Voice bank and Voice number.

Favorite Category indicator

When assigning the currently selected Voice to the Favorite category, this indicator will appear.

Category

Indicates the Main category and Sub category of the currently selected Voice.

TCH (Transmit Channel)

Indicates the Keyboard MIDI transmit channel. You can change the Keyboard MIDI transmit channel by pressing the

[TRACK] button so that its indicator lights and pressing any of the Number [1] – [16] buttons. The Keyboard MIDI

transmit channel can be changed also with the following operation: [UTILITY]  [F6] MIDI  [SF1] CH 

“KBDTransCh.”

(Arpeggio Tempo)

Indicates the Arpeggio tempo set for the currently selected Voice.

NOTE

This pa rameter can be set also by holding the [SHIFT] button an d pressing the [ENTER] button several times repeatedly at the

desired tempo. This function is referred to as “Tap Tempo.”

OCT (Octave)

Indicates the Keyboard Octave setting.

[SF1] ARP1 (Arpeggio 1) – [SF6] ARP6 (Arpeggio 6)

The Arpeggio types are assigned to the buttons with 8th note icons on the display tab. You can call them up by pressing

these buttons any time during your keyboard performance. The Arpeggio Type can be set in the Arpeggio Edit display

Operation

Press the [VOICE] button.

[F1] PLAY

Select the mode Select the function

MOXF6/MOXF8 Reference Manual

3

Basic Structure

Functional blocks

Tone Generator block

A/D Input block

Sequencer block

Arpeggio block

Controller block

Effect block

Internal memory

Reference

Voice mo de

Performance mode

Song mode

Pattern mode

Mixing mode

Master mode

Remote mode

Utility mode

Quick setup

File mode

Using iOS Applications

Appendix

MIDI

Basic Structure

Functional Blocks

The MOXF6/MOXF8 system consists of six main functional blocks: Tone Generator, A/D Input, Sequencer, Arpeggio,

Controller, and Effect.

*1 Depending on the settings for the audio signal connections, the signals input via the A/D INPUT [L]/[R] jacks may not be sent to the system effect or master

effect.

*2 The audio signals input via the USB [TO HOST] terminal are output to the OUTPUT [L/MONO]/[R] jacks directly, bypassing the A/D Input block and Effect

block.

AWM2 (Advanced Wave Memory 2)

This instrument is equipped with a AWM2 tone generator block. AWM2 (Advanced Wave Memory 2) is a synthesis

system based on sampled waves (sound material), and is used in many Yamaha synthesizers. For extra realism,

each AWM2 Voice uses multiple samples of a real instrument’s waveform. Furthermore, a wide variety of

parameters—envelope generator, filter, modulation, and others—can be applied.

*1

*2

USB [TO HOST]

MIDI [OUT]

USB [TO HOST]

MIDI [IN]

USB [TO HOST]

A/D INPUT [L]/[R]

USB [TO HOST]

OUTPUT [L/MONO]/[R]

Controller Section

(page 17)

Keyboard

Controllers

Tone Generator

(page 4)

AWM2 Tone Generator

16 Parts

Voices and Performances

Arpeggio Block (page 11)

Arpeggio Playback x 4

Preset Arpeggio

User Arpeggio

Sequencer Block

(page 9)

16-Track MIDI Sequencer

Songs and Patterns

Effects (page 18)

System Effect

Insertion Effect x 8

Element EQ

Part EQ x 16

Master Effect

Master EQ

A/D Input (page 8)

Song Mixing

Pattern Mixing

MIDI Message Flow

Audio Signal Flow

Computer External MIDI equipment

Computer

Microphone, guitar,

audio equipment,

etc.

Computer

Powered

speakers,

etc.

MIDI OUT MIDI IN AUDIO IN AUDIO OUT

MOXF6/MOXF8 Reference Manual

4

Basic Structure

Functional blocks

Tone Generator block

A/D Input block

Sequencer block

Arpeggio block

Controller block

Effect block

Internal memory

Reference

Voice mo de

Performance mode

Song mode

Pattern mode

Mixing mode

Master mode

Remote mode

Utility mode

Quick setup

File mode

Using iOS Applications

Appendix

MIDI

Tone Generator Block

The tone generator block is what actually produces sound in response to the MIDI messages received from the

Sequencer block, Controller block, Arpeggio block and from the external MIDI instrument via the MIDI [IN] terminal or

the USB [TO HOST] terminal. The MIDI messages are assigned to sixteen independent channels, and the instrument is

capable of simultaneously playing sixteen separate Parts, via the sixteen MIDI channels. However, the sixteen-channel

limit can be overcome by using separate MIDI “ports,” each supporting sixteen channels. The tone generator block of

this instrument can handle MIDI messages over Port 1. The structure of the tone generator block differs depending on

the mode.

Tone Generator block in the Voice Mode

Only one MIDI channel can be recognized in the Voice mode because only one part is available in this

mode. This status is referred to as a “single timbre” tone generator. A Voice is played from the keyboard,

using a single part. To set the MIDI receive channel for single timbre operation (Voice and Performance

modes), use the “BasicRcvCh” parameter (page 147) in the Utility MIDI display. In the Voice mode, the

instrument recognizes only data over MIDI Port 1.

NOTE

If you want to play Song data on an external MIDI sequencer or computer consisting of multiple MIDI

channels, make sure to use the Song/Pattern mode (page 76).

A program that contains the sonic elements for generating a specific musical instrument sound is

referred to as a “Voice.” Internally, there are two Voice types: Normal Voices and Drum Voices. Normal

Voices are mainly pitched musical instrument type sounds that can be played over the range of the

keyboard. Each Voice consists of up to eight Elements (Normal Voice) or up to 73 keys (Drum Voice). An

Element or Drum Key is the basic and the smallest unit for a Voice. This means that only one Element or

key can produce a musical instrument sound. In addition, a Normal Voice can produce even more

realistic sound or various types of sound by combining multiple Elements. Each Voice is created by

editing parameters unique to each Element/Key (Element Edit parameters/Key Edit parameters) and

parameters common to all the Elements/Keys (Common Edit parameters).

NOTE

For instructions on editing a Normal Voice, see page 30. For instructions on editing a Drum Voice, see page

47.

Normal Voices

This is a Voice which is played conventionally from

the keyboard, with standard pitches sounding for

each key. A Normal Voice consists of up to eight

Elements. Depending on the settings in the Voice

Edit mode, these Elements are sounded

simultaneously, or different Elements are sounded

according to the note range, velocity range and

the XA (Expanded Articulation) settings. The illustration is an example of a Normal Voice. Since the six

Elements here are distributed across both the note range of the keyboard and the velocity range, a

different Element sounds depending on which note you play and how strongly you play it. In the velocity

distribution, Elements 1, 3 and 5 sound when playing the keyboard softly, while Elements 2, 4 and 6

sound when playing it strongly. In the note distribution, Elements 1 and 2 sound in the lower range of the

keyboard, Elements 3 and 4 sound in the middle range, and Elements 5 and 6 sound in the higher

range. In the velocity distribution, Elements 1, 3 and 5 sound when playing the keyboard softly, while

Elements 2, 4 and 6 sound when playing it strongly. In a practical example of this in use, a piano Voice

could be composed of six different samples. Elements 1, 3 and 5 would be the sounds of the piano

played softly, over the respective note ranges, while Elements 2, 4 and 6 would be strongly played

sounds, for each respective note range. Actually, the MOXF6/MOXF8 is even more flexible than this,

since it allows up to eight independent Elements.

Part structure in the Voice mode

Voice

Normal Voices and Drum Voices

Velocity

Element 2

Element 1

Element 4

Element 3

Element 6

Element 5

MOXF6/MOXF8 Reference Manual

5

Basic Structure

Functional blocks

Tone Generator block

A/D Input block

Sequencer block

Arpeggio block

Controller block

Effect block

Internal memory

Reference

Voice mo de

Performance mode

Song mode

Pattern mode

Mixing mode

Master mode

Remote mode

Utility mode

Quick setup

File mode

Using iOS Applications

Appendix

MIDI

Drum Voices

Drum Voices are mainly percussion/drum sounds that are assigned to individual notes on the keyboard.

Unlike Elements, a Drum key is equivalent to the corresponding note, meaning that you cannot change

its range. Drum or percussion sounds are assigned to each Drum Key. You can create various types of

Drum Voices by changing the drum or percussion sound assigned to each key and edit the parameters

such as pitch and EG.

Expanded Articulation (XA) is a specially designed tone generation system that provides greater

performance flexibility and acoustic realism. It allows you to more effectively recreate realistic sound

and natural performance techniques—such as legato and staccato—and provides other unique modes

for random and alternate sound changes as you play.

Realistic legato performance

Conventional synthesizers recreate a legato effect by continuing the volume envelope of a previous note

on to the next one, in the mono mode. However, this results in an unnatural sound different from that of

an actual acoustic instrument. The MOXF more accurately reproduces a legato effect by allowing

specific Elements to be sounded when playing legato and other Elements to be played normally (with

the XA Control parameter settings “normal” and “legato”).

Authentic note release sound

Conventional synthesizers cannot adequately produce the sounds of notes on acoustic instruments

being released. The MOXF6/MOXF8 reproduces these special, characteristic sounds by setting the XA

Control parameter of certain Elements to “keyOffSound.”

Subtle sound variations for each note played

Conventional synthesizers attempt to reproduce this by randomly changing the pitch and/or filter.

However, this produces an electronic effect and is different from the real sound changes on an acoustic

instrument. The MOXF6/MOXF8 more accurately reproduces these subtle sound variations by using the

XA Control parameter settings “waveCycle” and “waveRandom.”

Switching among different sounds to recreate the natural performance on an

acoustic instrument

Acoustic instruments have their own unique characteristics—even specific, unique sounds that are

produced only at certain times in a performance. These include the flutter tonguing on a flute or the

playing of high harmonics on an acoustic guitar. Conventional synthesizers (before the MOTIF XS

series) could realize such sounds, for example, by triggering them through high (strong) velocity. The

MOXF6/MOXF8 recreates these by allowing you to switch between the sounds while you play—using

the ASSIGNABLE FUNCTION [1]/[2] buttons and the XA Control parameter settings, “AF1 On,” “AF2

On” and “all AF off.”

NOTE

You can turn the ASSIGNABLE FUNCTION [1]/[2] button on or off also by transmitting the Control Change

number specified as “AF1”/”AF2” (page 146) in the Utility CTL ASN display from an external device.

New sounds and new styles of playing

The highly versatile functions above can be applied effectively not only to acoustic sounds but also to

synthesizer and electronic Voices as well. The XA feature opens up enormous potential for realizing

authentic sounds, performing expressively and coming up with creative new styles of playing.

Expanded Articulation (XA)

C0

C1 C6

Individual drum sounds

(different for each key)

MOXF6/MOXF8 Reference Manual

6

Basic Structure

Functional blocks

Tone Generator block

A/D Input block

Sequencer block

Arpeggio block

Controller block

Effect block

Internal memory

Reference

Voice mo de

Performance mode

Song mode

Pattern mode

Mixing mode

Master mode

Remote mode

Utility mode

Quick setup

File mode

Using iOS Applications

Appendix

MIDI

Elements and Drum Keys are the smallest “building blocks” in the MOXF6/MOXF8 that comprise a

Voice; in fact, only one Element or one Drum Key could be used to create a Voice. These small sound

units can be built, enhanced and processed by a variety of traditional synthesizer parameters, such as

Oscillator, Pitch, Filter, Amplitude, and LFO (shown below).

Oscillator

This unit outputs the wave which determines the basic pitch. You can assign the waveform (or basic

sound material) to each Element of a Normal Voice or each Key of a Drum Voice. In the case of a Normal

Voice, you can set the note range for the Element (the range of notes on the keyboard over which the

Element will sound) as well as the velocity response (the range of note velocities within which the

Element will sound). In addition, the XA related parameters of this unit can be set. Each waveform

consists of sample(s) created by recording the sound of the actual instrument and assigning

appropriate keyboard and velocity settings. Oscillator related parameters can be set in the Oscillator

display (pages 38 and 48).

Pitch

This unit controls the pitch of the sound (wave) output from the Oscillator. In the case of a Normal Voice,

you can detune separate Elements, apply Pitch Scaling and so on. Also, by setting the PEG (Pitch

Envelope Generator), you can control how the pitch changes over time. Pitch related parameters can be

set in the PITCH display (page 40) of the Voice Element Edit. Note that the Pitch related parameters of a

Drum Voice can be set in the PITCH display (page 49) of Drum Voice Key Edit.

Filter

This unit modifies the tone of the sound output from Pitch by cutting the output of a specific frequency

portion of the sound. Also, by setting the FEG (Filter Envelope Generator), you can control how the

Cutoff Frequency of the Filter changes over time. Filter related parameters can be set in the FILTER

display (pages 41 and 50) of Voice Element Edit or Drum Voice Key Edit.

Amplitude

This unit controls the output level (amplitude) of the sound output from the Filter block. The signals are

then sent at this level to the Effect block. Also, by setting the AEG (Amplitude Envelope Generator), you

can control how the volume changes over time. Amplitude related parameters can be set in the AMP

display (pages 43 and 50) of Voice Element Edit or Drum Voice Key Edit.

LFO (Low Frequency Oscillator)

As its name suggests, the LFO produces a wave of a low frequency. These waves can be used to vary

the pitch, filter or amplitude of each Element to create effects such as vibrato, wah and tremolo. LFO

can be set independently for each Element; it can also be set globally for all Elements. LFO related

parameters can be set in the LFO display (pages 33 and 45) of Voice Common Edit or Voice Element

Edit.

Elements and Drum Keys

OSC

(Oscillator)

LFO

Low Frequency

Oscillator

PITCH

Controls the pitch

of the sound.

FILTER

Changes the tonal

quality of the sound

output from the

PITCH unit.

Waveform

(AWM2)

AMP

Controls the output level

(amplitude) of the sound

output from the FILTER

unit. The signals are then

sent at this level to the

Effect block.

Pitch EG

(Pitch Envelope

Generator)

Filter EG

(Filter Envelope

Generator)

Amplitude EG

(Amplitude Envelope

Generator)

MOXF6/MOXF8 Reference Manual

7

Basic Structure

Functional blocks

Tone Generator block

A/D Input block

Sequencer block

Arpeggio block

Controller block

Effect block

Internal memory

Reference

Voice mo de

Performance mode

Song mode

Pattern mode

Mixing mode

Master mode

Remote mode

Utility mode

Quick setup

File mode

Using iOS Applications

Appendix

MIDI

Normal Voices

Preset Banks 1 – 9 1152 Normal Voices (128 Voices for each Bank)

User Banks 1 – 3 384 Voices (128 Voices for each Bank)

GM Bank 128 Voices

Drum Voices

Preset Drum Bank 72 Voices

User Drum Bank 32 Voices

GM Drum Bank 1 Voice

Tone Generator block in the Performance mode

In this mode, the tone generator block receives MIDI data over a single channel. This status is referred

to as a “single timbre” tone generator. This mode lets you play a Performance (in which multiple Voices

or Parts are combined—in a layer, or in other configurations) using the keyboard. Keep in mind that

Song data on an external sequencer consisting of multiple MIDI channels will not play back properly in

this mode. If you are using an external MIDI sequencer or computer to play the instrument, make sure to

use the Song mode or Pattern mode.

A program in which multiple Voices (Parts) are combined in a layer, or in other configurations is referred

to as a “Performance.” Each Performance can contain up to four different Parts (Voices). Each

Performance can be created by editing parameters unique to each Part and parameters common to all

Parts in Performance mode (page 55).

Two User Banks are provided. Each Bank contains 128 Performances, for a total of 256 User

Performances.

Tone Generator block in the Song mode/Pattern mode

In these modes, multiple Parts are provided and different Voices and different melodies or phrases can

be played back for each Part. A MIDI tone generator that simultaneously receives over multiple MIDI

channels and plays multiple instrument Parts is referred to as a “multi-timbral” tone generator. The

settings for the multi-timbral tone generator are collectively referred to as a “Mixing.” You can use the

Mixing when playing the MOXF6/MOXF8 sounds by using an external MIDI sequencer as well as using

the sequencer block of the instrument. In this case, you should use the Mixing of the Song or Pattern

that does not contain any sequence data.

A program in which multiple Voices are assigned to Parts for multi-timbral play in the Song and Pattern

modes is referred to as a “Mixing.” Each Mixing can contain up to 16 parts. Each Mixing can be created

by editing parameters unique to each Part and parameters common to all Parts in the Mixing mode

(page 114).

Also, one Mixing has up to sixteen memory locations for saving Normal Voices. These Voices which are

saved are called Mixing Voices. Normally, the Voice stored in the Voice mode is assigned to each

Memory structure of Voices

Part structure in the Performance mode

Performance

Performance Memory contents

Part structure of the tone generator block in the Song mode/Pattern

mode

About Mixing

MOXF6/MOXF8 Reference Manual

8

Basic Structure

Functional blocks

Tone Generator block

A/D Input block

Sequencer block

Arpeggio block

Controller block

Effect block

Internal memory

Reference

Voice mo de

Performance mode

Song mode

Pattern mode

Mixing mode

Master mode

Remote mode

Utility mode

Quick setup

File mode

Using iOS Applications

Appendix

MIDI

Mixing Part. In this case, the sound of the Song/Pattern you created may change unexpectedly if you

edit or delete the Voice used for the Song/Pattern Mixing in the Voice mode. Mixing Voices are provided

to prevent these accidental sound changes.

A Mixing program is provided for each Song or Pattern. Selecting a different Song/Pattern calls up a

different Mixing program. A Mixing Voice provides 16 memories for each Mixing program (Song or

Pattern). Selecting a different Song/Pattern calls up the different Mixing Voice as well as the Mixing

program. If you wish to use a Mixing Voice of a certain Song/Pattern for another Song/Pattern, execute

the Copy operation (page 123) in the Mixing Voice Job. Note that up to 256 Mixing Voices can be stored

for all Songs and Patterns. If the memory for Mixing Voices is full, delete the Mixing Voices you don’t

need by executing the Delete job of the Mixing Voice job.

A/D Input Block

This block handles the audio signal input from the A/D INPUT [L]/[R] jacks. Various parameters such as volume, pan,

and effect can be set for the audio signal and the sound is output together with other Voices. The Insertion Effect as well

as the System Effects can be applied to the audio signal input via the A/D INPUT [L]/[R] jacks. The A/D Input block

related parameters can be set in the following display.

The effect which is applied to the audio signal input from the A/D INPUT [L]/[R] jacks is set in the USB I/O display (page

146) of the Utility mode. The gain of the audio signal from the A/D INPUT [L]/[R] jacks can be adjusted via the A/D

INPUT [GAIN] knob on the panel. Moreover, the on/off setting of the audio signal from the A/D INPUT [L]/[R] jacks can

be set via the A/D INPUT [ON/OFF] button.

Memory structure of Mixing

Maximum Polyphony

Maximum polyphony refers to the highest number of notes that can be sounded simultaneously

from the internal tone generator of the instrument. The maximum polyphony of this synthesizer is

128. When the internal tone generator block receives a number of notes exceeding the maximum

polyphony, previously played notes are cut off. Keep in mind this may be especially noticeable

with Voices not having decay. Furthermore, the maximum polyphony applies to the number of

Voice Elements used, not the number of Voices. When Normal Voices that include up to eight

Elements are used, the maximum number of simultaneous notes may be less than 128.

Mode Display

Corresponding page in

the Reference Manual

Voice mode VCE A/D display in the Utility mode Page 145

Performance mode A/D IN display in Performance Common Edit Page 62

Song/Pattern mode A/D IN display in Mixing Common Edit Page 116

MOXF6/MOXF8 Reference Manual

9

Basic Structure

Functional blocks

Tone Generator block

A/D Input block

Sequencer block

Arpeggio block

Controller block

Effect block

Internal memory

Reference

Voice mo de

Performance mode

Song mode

Pattern mode

Mixing mode

Master mode

Remote mode

Utility mode

Quick setup

File mode

Using iOS Applications

Appendix

MIDI

Sequencer Block

This lets you create Songs and Patterns by recording and editing your performances as MIDI data (from the controller

block), allowing you to play the data back with the tone generator block.

Sequencer block in the Song mode

A Song is created by recording your keyboard performance as MIDI sequence data to individual

Tracks. A Song on this synthesizer is effectively the same as a Song on a MIDI sequencer, and playback

automatically stops at the end of the recorded data.

A Song consists of 16 separate Tracks, a Scene Track, and a Tempo Track. You can record these Tracks

by using Realtime recording or Step recording (page 79). Moreover, you can insert or edit the recorded

data using Song Edit (page 84).

Sequence Tracks 1 – 16

Lets you record MIDI data.

Scene Track

Lets you record Scene change settings, such as Track mute and solo. These can be set in the Song

Play display (page 76) and recalled during Song playback. During Song playback, the Track mute and

solo settings change automatically according to the settings you’ve recorded to the Scene Track.

Tempo Track

Lets you record Tempo change settings. During Song playback, the Tempo changes automatically

according to the settings you’ve recorded to this Track.

This function allows Songs to be “chained” together for automatic sequential playback. You can set the

playback order in Song Play (page 76).

Sequencer block in the Pattern mode

In the MOXF6/MOXF8, the term “Pattern” refers to a relatively short musical or rhythmic Phrase—1 to

256 measures—which is used for looped playback. Therefore, once Pattern playback starts, it

continues until you press the [ ] (Stop) button.

Patterns are more than just a single Phrase—they include 16 variations called “Sections.” These

Sections can be changed during playback and used as rhythmic/backing variations for the various

parts of a Song. For example, you could use one Section for the verse, another for the chorus, and a

third for the bridge. The Pattern related settings such as tempo and Mixing do not change even when

the Section is switched, keeping the overall playback consistent in feel and rhythm through the

changes. You can use the Section function as a convenient compositional tool, instantly creating the

backing Pattern variations for a Song, such as melody A, melody B, and main theme. For instructions on

changing Patterns and Sections, see the MOXF6/MOXF8 Owner’s Manual.

About Songs

Song Track structure

Song Chain

About Patterns

Section

Song 01 Song 22 Song 15

MOXF6/MOXF8 Reference Manual

10

Basic Structure

Functional blocks

Tone Generator block

A/D Input block

Sequencer block

Arpeggio block

Controller block

Effect block

Internal memory

Reference

Voice mo de

Performance mode

Song mode

Pattern mode

Mixing mode

Master mode

Remote mode

Utility mode

Quick setup

File mode

Using iOS Applications

Appendix

MIDI

Pattern Chain allows you to string several different Sections (within a single Pattern) together to make a

single, complete Song. You can have the MOXF6/MOXF8 automatically change Sections by creating a

Pattern Chain beforehand, recording Pattern playback with Section changes from the Pattern Chain

display. One Pattern Chain can be created for each Pattern in the Pattern Chain display (page 103). You

can also use this feature when creating Songs based on a certain Pattern, since the created Pattern

Chain can be converted into a Song in Pattern Chain Edit (page 104).

This is the basic MIDI sequence data in a Track—and the smallest unit—used in creating a Pattern.

“Phrases” are short musical/rhythmic passages for a single instrument, such as a rhythm pattern for the

rhythm part, a bass line for the bass part, or a chord backing for the guitar part. This synthesizer

features memory space for 256 of your own original User Phrases.

NOTE

The MOXF6/MOXF8 provides no Preset Phrases.

A Pattern consists of 16 separate Tracks. See “Sequence Tracks 1 – 16” of “Song Track Structure.”

(Page 9)

A Pattern consists of 16 Tracks to which the Phrase can be assigned. MIDI data cannot be directly

recorded to each Track in the Pattern mode. Recording is done to an empty User Phrase. The newly

created Phrase is automatically assigned to the recording Track.

Sequencer block applied to both Songs and Patterns

MIDI Tracks are created by recording your keyboard performance in the Song Record mode/Pattern

Record mode. MIDI sequence data is recorded to the MIDI Track and the Normal Voice or Drum Voice is

assigned to the Mixing part corresponding to the Track. To edit the Mixing parameters such as Voice,

volume and pan for each Track, press the [MIXING] button to enter the Mixing mode (page 114), then

edit them for the Mixing Part corresponding to the desired Track. Note that Track 1 does not always

correspond to Mixing Part 1. As illustrated below, each Track of the Song sequence data and each

Mixing Part of the tone generator block are connected when the output channel (TxCH) equals the

receive channel (RcvCH). In other words, the sequence data of each Track plays the corresponding

Parts (those having the same MIDI channel assignment) in the tone generator block. The Transmit

Channels of each Track can be set in the TRACK display (page 78) of the Song mode or Pattern mode

while the Receive Channels of each Part can be set in the VOICE display (page 117) of Mixing Edit.

Pattern Chain

Phrase

Pattern Track Structure

Pattern Tracks and Phrases

MIDI Tracks and Mixing settings

Section A Section B Section C

Track 1

Track 2

:

Track 16

Phrase 001

Phrase 002

:

Phrase 003

Phrase 001

Phrase 002

Phrase 003

:

MIDI data

:

MOXF6/MOXF8 Reference Manual

11

Basic Structure

Functional blocks

Tone Generator block

A/D Input block

Sequencer block

Arpeggio block

Controller block

Effect block

Internal memory

Reference

Voice mo de

Performance mode

Song mode

Pattern mode

Mixing mode

Master mode

Remote mode

Utility mode

Quick setup

File mode

Using iOS Applications

Appendix

MIDI

NOTE When you play the keyboard in the Mixing mode, the selected Part will not sound, but the Part assigned to the

same numbered Track as the selected part will sound, For example, when setting as in the above illustration,

playing the keyboard sounds Part 1 even if Part 2 is selected in the Mixing mode.

Sequencer block applied to the Performance mode

You can record your keyboard performance in the Performance mode to the Song or Pattern. You can

record knob operations, controller operations and Arpeggio playback as well as your keyboard playing

to the specified Track as MIDI events.

NOTE

In Performance recording, operating the knobs only result in the Control Change messages being recorded;

Parameter Change messages cannot be recorded. For details regarding Control Change messages, see the

“Synthesizer Parameter Manual” PDF document.

Arpeggio playback data for Parts 1 – 4 of the Performance will be recorded to the specified four Tracks

(in the REC TR display of Performance Record) of the Song/Pattern respectively. Your keyboard

performance and controller/knob operations (common to Parts 1 – 4) will be recorded to Tracks 1 – 4

separately.

NOTE

For details on operation, refer to the MOXF6/MOXF8 Owner’s Manual.

Arpeggio Block

This block lets you automatically trigger musical and rhythmic phrases using the current Voice by simply pressing a

note or notes on the keyboard. The Arpeggio sequence also changes in response to the actual notes or chords you

play, giving you a wide variety of inspiring musical phrases and ideas—both in composing and performing. Four

Arpeggio types can be played back at the same time even in the Song mode and Pattern mode.

Arpeggio categories

The Arpeggio types are divided into 16 categories (excepting “NoAsg”) as listed below. The categories are based on

instrument type.

Category List

NOTE Categories named “GtMG” and “BaMG” include Arpeggio types appropriate for using with a Mega Voice.

Performance Recording

ApKb Acoustic Piano & Keyboard Lead Synth Lead

Organ Organ PdMe Synth Pad / Musical Effect

GtPl Guitar / Plucked CPrc Chromatic Percussion

GtMG Guitar for "Mega Voice" DrPc Drum / Percussion

Bass Bass Seq Synth Seq

BaMG Bass for "Mega Voice" Hybrd Hybrid Seq

Strng Strings Cntr Control

Brass Brass NoAsg No Assignment

RdPp Reed / Pipe

Song/Pattern

Sequencer block

Sequence data

(Song, Pattern)

Track 1

Track 2

Track 3

:

Tra ck 16

Part 1

Part 2

Part 3

:

Part 16

TxCH

2

3

:

16

RcvCH

2

3

:

16

Tone generator block

Mixing

Recording

MOXF6/MOXF8 Reference Manual

12

Basic Structure

Functional blocks

Tone Generator block

A/D Input block

Sequencer block

Arpeggio block

Controller block

Effect block

Internal memory

Reference

Voice mo de

Performance mode

Song mode

Pattern mode

Mixing mode

Master mode

Remote mode

Utility mode

Quick setup

File mode

Using iOS Applications

Appendix

MIDI

Sub categories

The Arpeggio categories are divided into the sub categories listed below. Because the sub categories are listed based

on the music genre, it is easy to find the sub category appropriate for your desired music style.

Sub Category List

NOTE Arpeggio types belonging to the Sub Categories marked with an asterisk (*) contain some velocity ranges, to

which each has a different phrase assigned. When a type of these categories is selected in the Voice mode, it

is a good idea to set the Velocity Limit of each Element to the same range as below.

Velocity ranges of each Arpeggio type.

2Z_*****: 1 – 90, 91 – 127

4Z_*****: 1 – 70, 71 – 90, 91 – 110, 111 – 127

8Z_*****: 1 – 16, 17 – 32, 33 – 48, 49 – 64, 65 – 80, 81 – 96, 97– 108, 109 – 127

PadL_*****: 1 – 1, 2 – 2, 3 – 127

PadH_*****: 1 – 112, 113 – 120, 121 – 127

Arpeggio Type Name

The Arpeggio Types are named according to certain rules and abbreviations. Once you understand these rules and

abbreviations, you’ll find it easy to browse through and select the desired Arpeggio Types.

Arpeggio type with “_ES” at the end of the type name (example: HipHop1_ES)

These Arpeggio types use the same multi Track Arpeggio architecture as the MOTIF ES. This ES type of

arpeggio has the following benefits: 1) These arpeggios can create complex notes and chords even

when triggered by one note. 2) The arpeggio closely follows the notes played on the keyboard (only in

the area where the arpeggio is assigned), allowing a good deal of harmonic freedom and the possibility

to “solo” using these arpeggios.

Arpeggio type with “_XS” at the end of the type name (example: Rock1_XS)

These Arpeggios use a newly developed chord recognition technology to determine what notes should

be played back by the Arpeggio. This XS type of arpeggio has the following benefits: 1) The arpeggios

respond only to an area on the keyboard where an XS type of arpeggio is assigned. Other areas of the

keyboard do not affect the chord recognition. This allows very natural keyboard playing across the

entire keyboard with arpeggio generated bass and backing parts. 2) The arpeggio will always play

harmonically correct parts. These are especially useful for bass and chordal backing parts.

Mega Voices and Mega Voice Arpeggios

Normal Voices use velocity switching to make the sound quality and/or level of a Voice change according to how

strongly or softly you play the keyboard—giving greater authenticity and natural response to these Voices.

However Mega Voices have a very complex structure with many different layers that is not suitable for playing

manually. Mega Voices were developed specifically to be played by Mega Voice arpeggios to produce

incredibly realistic results. You should always use Mega Voices with Mega Voice Arpeggios (included in “GtMG”

and “BaMG” category). For details regarding the Mega Voice Arpeggios, see the “Voice Type” of the “Arpeggio

Type List” in the “Data List” PDF document.

Rock Rock World World

PopRk Pop Rock Genrl General

Balad Ballad Comb Combination

HipHp Hip Hop Zone Zone Velocity*

R&B-M R&B Modern Z.Pad Zone Velocity for Pad*

R&B-C R&B Classic Filtr Filter

Funk Funk Exprs Expression

Tekno Techno / Trance Pan Pan

House House / Dance Pop Mod Modulation

D&B D&B / Breakbeats Pbend Pitch Bend

Chill Chillout / Ambient Asign Assign 1/2

Jazz Jazz / Swing --- No Assignment

Latin Latin

MOXF6/MOXF8 Reference Manual

13

Basic Structure

Functional blocks

Tone Generator block

A/D Input block

Sequencer block

Arpeggio block

Controller block

Effect block

Internal memory

Reference

Voice mo de

Performance mode

Song mode

Pattern mode

Mixing mode

Master mode

Remote mode

Utility mode

Quick setup

File mode

Using iOS Applications

Appendix

MIDI

Arpeggio type with a normal name (example: UpOct1)

In addition to the above types, there are three playback types: the Arpeggios created for use of Normal

Voices and played back using only the played notes and their octave notes (page 15), the Arpeggios

created for use of Drum Voices (page 16), and Arpeggios containing mainly non-note events (page 16).

A

rpeggio type with “_AF1,” “_AF2,” or “_AF1&AF2” (example: Electro Pop AF1)

When this Type is triggered, the ASSIGNABLE FUNCTION [1] button, [2] button, or both buttons will be

turned on during playback.

How to use the Arpeggio Type List

The Arpeggio Type list in the “Data List” PDF document contains the following columns.

NOTE

Note that this list is for illustration purposes only. For a complete listing of the Arpeggio Types, see the “Data List” PDF

document.

Main Category

Indicates an Arpeggio Main Category.

Sub Category

Indicates an Arpeggio Sub Category.

ARP No (Arpeggio Number)

Indicates the Arpeggio type number.

ARP Name (Arpeggio Name)

Indicates the Arpeggio Name.

Time Signature

Indicates the time signature or meter of the Arpeggio type.

Length

Indicates the data length (amount of measures) of the Arpeggio type. When the Loop parameter

*1

is set to “off,” the Arpeggio plays back for this length and stops.

Original Tempo

Indicates the appropriate tempo value of the Arpeggio type. Note that this tempo is not set

automatically when selecting an Arpeggio type.

Accent

The circle indicates that the Arpeggio uses the Accent Phrase feature (page 14).

Random SFX

The circle indicates that the Arpeggio uses the SFX feature (page 15).

Voice Type

Indicates the voice type appropriate for the Arpeggio Type. When the “VoiceWithARP” (Voice with

Arpeggio)

*2

is set to “on” in the Song/Pattern Record, the voice of this type is automatically

selected.

*1 The Loop parameter can be set in the PLAY FX display of Arpeggio Edit for Voice mode (page 28), Performance

mode (page 58), and Song/Pattern mode (page 83).

*2 The “VoiceWithARP” parameter can be set in the MAIN display of the Arpeggio Edit for Song/Pattern mode (page

83).

Main

Category

ARP

No.

ARP Name

Time

Signature

Length

Original

Tempo

Accent

Random

SFX

Voice Type

ApKb Rock 1 MA_70s Rock _ES 4 / 4 2 130 Acoustic Piano

ApKb Rock 2 MB_70s Rock _ES 4 / 4 1 130 :

ApKb Rock 3 MC_70s Rock 4 / 4 2 130

ApKb Rock 4 MD_70s Rock 4 / 4 4 130

ApKb Rock 5 FA_70s Rock 4 / 4 1 130

ApKb Rock 6 FB_70s Rock _ES 4 / 4 1 130

ApKb Rock 7 FC_70s Rock _ES 4 / 4 2 130

MOXF6/MOXF8 Reference Manual

14

Basic Structure

Functional blocks

Tone Generator block

A/D Input block

Sequencer block

Arpeggio block

Controller block

Effect block

Internal memory

Reference

Voice mo de

Performance mode

Song mode

Pattern mode

Mixing mode

Master mode

Remote mode

Utility mode

Quick setup

File mode

Using iOS Applications

Appendix

MIDI

Arpeggio related settings

There are several methods for triggering and stopping the Arpeggio playback. In addition, you can set whether or not

SFX sounds and special Accent Phrases are triggered along with the normal sequence data. This section covers the

Arpeggio related parameters which can be set in the Voice, Performance and Mixing modes.

The following three settings are available for turning the Arpeggio playback on/off.

NOTE

For the displays including the “Hold” and “TriggerMode” parameters, see MAIN display and PLAY FX display

of the Arpeggio Edit for Voice mode (page 28), Performance mode (page 58), and Song/Pattern mode (page

83).

NOTE When receiving the MIDI sustain message (control change #64) with “Arp Sw” set to “on,” you can obtain the

same result by setting “Common Switch” and “Part Switch” to “on.”

When the ARP lamp is turned on by pressing the Knob Function 2 button a few times, you can use

knobs 5 – 8 to control Arpeggio playback. Try this out and listen for the changes in the sound. For

details regarding the effect of the knobs 5 – 8, see “Knob Functions” of the Voice mode (page 54).

Accent Phrases are composed of sequence data included in some Arpeggio types, sounding only

when you play notes at a velocity higher (stronger) than that specified in the Accent Velocity Threshold

parameter. If it is hard to play at velocities necessary to trigger the Accent Phrase, set the “AccntVelTh”

(Accent Velocity Threshold) parameter to a lower value.

NOTE

For the displays including the “AccntVelTh” parameters, see PLAY FX display of the Arpeggio Edit for Voice

mode (page 28), Performance mode (page 58), and Song/Pattern mode (page 83).

NOTE For information on Arpeggio types that use this function, refer to the “Arpeggio Type List” in the “Data List”

PDF document.

Turning Arpeggio playback on/off

To play the Arpeggio only when the note is pressed: Set the “Hold” parameter to “off” and the “TriggerMode”

parameter to “gate.”

To continue the Arpeggio even if the note is released: Set the “Hold” parameter to “on” and the “TriggerMode”

parameter to “gate.”

To toggle the Arpeggio playback on/off whenever the

note is pressed:

Set the “TriggerMode” parameter to “toggle.” The “Hold”

parameter can be set to either “on” or “off.”

Using the knobs to control Arpeggios

Accent Phrase

Press this button a few times so that the lamp lights

Arpeggio functions controlled via the knobs

MOXF6/MOXF8 Reference Manual

15

Basic Structure

Functional blocks

Tone Generator block

A/D Input block

Sequencer block

Arpeggio block

Controller block

Effect block

Internal memory

Reference

Voice mo de

Performance mode

Song mode

Pattern mode

Mixing mode

Master mode

Remote mode

Utility mode

Quick setup

File mode

Using iOS Applications

Appendix

MIDI

Some Arpeggio types feature a Random SFX function which will trigger special sounds (such as guitar

fret noises) when the note is released. The following parameters affecting Random SFX are provided.

NOTE

For the displays including the “RandomSFX,” “SFXVelOffset,” and “SFXKeyOnCtrl” parameters, see PLAY FX

display of the Arpeggio Edit for Voice mode (page 28), for Performance mode (page 58), for Song/Pattern

mode (page 83).

NOTE For information on Arpeggio types that use this function, refer to the “Arpeggio Type List” in the “Data List”

PDF document.

Each mode has one Arpeggio Edit display for the Arpeggio settings. If you press the ARP [EDIT] button

in any of the modes, the Arpeggio Edit display will be shown.

Arpeggio playback types

There are three main Arpeggio playback types as described below.

Arpeggio types (belonging to all categories except for DrPC and Cntr) created for use of Normal Voices

have the following three playback types.

Playback of played notes only

The Arpeggio is played back using only the played note(s) and octave notes.

Playback of a programmed sequence according to the played notes

These Arpeggio types have the several sequences each of which is suited for a certain chord type.

Even if you press only one note, the Arpeggio is played back using the programmed

sequence—meaning that notes other than the ones you play may be sounded. Pressing another note

triggers a transposed sequence using the pressed note as the new root note. Adding notes to those

already held changes the sequence accordingly. Arpeggios with this playback type have “_ES” at the

end of the type name.

Playback of a programmed sequence according to the played chord

These Arpeggio types created for use with Normal Voices are played back to match the chord type

determined by detecting the notes you play on the keyboard. Arpeggios with this playback type have

“_XS” at the end of the type name.

NOTE

When the “KeyMode” parameter is set to “sort” or “sortdirect,” the same sequence is played back no matter

what order you play the notes. When the “KeyMode” parameter is set to “thru” or “thrudirect,” a different

sequence is played back depending on the order you play the notes.

NOTE Since these types are programmed for Normal Voices, using them with Drum Voices may not produce

musically appropriate results.

Random SFX

For turning the Random SFX on/off: Random SFX parameter

For setting the volume of the SFX sound: SFXVelOffset (Random SFX Velocity Offset) parameter

For determining whether or not the volume of the SFX

sound is controlled by velocity:

SFXKeyOnCtrl (Random SFX Key on Control) parameter

Arpeggio setting displays

Arpeggios for Normal Voices

MOXF6/MOXF8 Reference Manual

16

Basic Structure

Functional blocks

Tone Generator block

A/D Input block

Sequencer block

Arpeggio block

Controller block

Effect block

Internal memory

Reference

Voice mo de

Performance mode

Song mode

Pattern mode

Mixing mode

Master mode

Remote mode

Utility mode

Quick setup

File mode

Using iOS Applications

Appendix

MIDI

These Arpeggio types are programmed specifically for use with Drum Voices, giving you instant access

to various rhythm patterns. Three different playback types are available.

Playback of a drum pattern

Pressing any note(s) will trigger the same rhythm pattern.

Playback of a drum pattern, plus additional played notes (assigned drum

instruments)

Pressing any note will trigger the same rhythm pattern. Adding notes to the one already held produces

additional sounds (assigned drum instruments) for the drum pattern.

Playback only of the played notes (assigned drum instruments)

Playing a note or notes will trigger a rhythm pattern using only the notes played (assigned drum

instruments). Keep in mind that even if you play the same notes, the triggered rhythm pattern differs

depending on the order of the notes played. This gives you access to different rhythm patterns using

the same instruments simply by changing the order in which you play the notes, when the “KeyMode”

parameter is set to “thru” or “thrudirect.”

NOTE

The three playback types above are not distinguished by category name or type name. You’ll have to actually

play the types and hear the difference.

NOTE Since these types are programmed for Drum Voices, using them with Normal Voices may not produce

musically appropriate results.

These arpeggio types are programmed primarily with Control Change and Pitch Bend data. They are

used to change the tone or pitch of the sound, rather than play specific notes. In fact, some types

contain no note data at all. When using a type of this category, set the “KeyMode” parameter to “direct,”

“thrudirect,” or “sortdirect.”

NOTE

For the displays including the “KeyMode” parameters, see the PLAY FX display of the Arpeggio Edit for Voice

mode (page 28), Performance mode (page 58), or for Song/Pattern mode (page 83).

Arpeggios for Drum/Percussion Voices (Category: DrPc)

Arpeggios containing mainly non-note events (Category: Cntr)

Tips for Arpeggio playback

Arpeggios not only provide inspiration and full rhythmic passages over which you can perform, they give you

quality MIDI data you can use in creating Songs, or fully formed backing parts to be used in your live

performances. For instructions on using Arpeggio, see the “Quick Guide” in the Owner’s Manual.

MOXF6/MOXF8 Reference Manual

17

Basic Structure

Functional blocks

Tone Generator block

A/D Input block

Sequencer block

Arpeggio block

Controller block

Effect block

Internal memory

Reference

Voice mo de

Performance mode

Song mode

Pattern mode

Mixing mode

Master mode

Remote mode

Utility mode

Quick setup

File mode

Using iOS Applications

Appendix

MIDI

Controller Block

This block consists of the keyboard, Pitch Bend and Modulation Wheels, Ribbon Controller, Knobs, Sliders and so on.

The keyboard itself doesn’t generate sounds, but instead generates/transmits note on/off, velocity and other information

(MIDI messages) to the synthesizer’s tone generator block when you play notes. The controllers also generate/transmit

MIDI messages. The synthesizer’s tone generator block produces sound according to the MIDI messages transmitted

from the keyboard and controllers.

Keyboard

The keyboard transmits the note on/off messages to the Tone Generator Block (for sounding) and Sequencer Block (for

recording). The keyboard is also used for triggering Arpeggio playback. You can change the note range of the keyboard

in octaves by using the OCTAVE [-]/[+] buttons, transpose the notes by using the TRANSPOSE [-]/[+] buttons, and set

how the actual velocity is generated according to the strength with which you play notes.

Pitch Bend wheel

Use the Pitch Bend wheel to bend notes up (roll the wheel away from you) or

down (roll the wheel toward you) while playing the keyboard. Roll the wheel

upward/downward to bend the pitch upward/downward. This wheel is self-

centering and will automatically return to normal pitch when released. Each

preset Voice has its own default Pitch Bend Range setting. The Pitch Bend

Range setting can be changed in the GENERAL display (page 30) of Voice

Common Edit, the VOICE display (page 64) of Performance Part Edit, or the

VOICE display (page 117) of Mixing Part Edit. From these displays you can also reverse the Pitch Bend function—so

that moving the wheel up lowers the pitch, and moving it down raises the pitch. Functions other than Pitch Bend can be

assigned to the Pitch Bend wheel in the CTL SET display (page 32) of Voice Edit.

Modulation wheel

Even though the Modulation wheel is conventionally used to apply vibrato to

the sound, many of the preset Voices have other functions and effects

assigned to the wheel. The more you move this wheel up, the greater the

effect that is applied to the sound. To avoid accidentally applying effects to

the current Voice, make sure the Modulation wheel is set to minimum before

you start playing. Various functions can be assigned to the Modulation wheel

in the CTL SET display (page 32) of the Voice Common Edit.

Assignable Function buttons

According to the XA (Expanded Articulation) Control settings in the OSC display (page 38) of Voice Element Edit, you

can call up specific Elements of the current Voice by pressing each of these buttons during your keyboard

performance. You can select how the on/off status of these buttons is switched by using the Assignable Function 1

Mode and Assignable Function 2 Mode parameters in the GENERAL display (page 30) of Voice Common Edit.

Furthermore, you can assign various functions (other than calling up specific Elements) to these buttons in the CTL SET

display (page 32) of Voice Edit.

Knobs

These eight knobs let you change various aspects of the Voice’s sound in real time—while you play. The eight sliders let

you adjust the volume of the Voice Elements, Performance Parts and Mixing Parts. For instructions on using the knobs in

the Voice/Performance mode, see the Owner’s Manual. For instructions on using the knobs in the Song/Pattern mode,

see page 124.

DAW Remote

Press the [DAW REMOTE] to enter the Remote mode. Entering the Remote mode will change the functions of the panel

buttons—with the exception of the A/D INPUT [ON/OFF], OCTAVE [-]/[+], TRANSPOSE [-]/[+] and [UTILITY] buttons—to those

exclusive to this mode. For details, see the Remote mode of the “Reference” section on page 133.

Pitch up

Pitch down

Maximum

Minimum

MOXF6/MOXF8 Reference Manual

18

Basic Structure

Functional blocks

Tone Generator block

A/D Input block

Sequencer block

Arpeggio block

Controller block

Effect block

Internal memory

Reference

Voice mo de

Performance mode

Song mode

Pattern mode

Mixing mode

Master mode

Remote mode

Utility mode

Quick setup

File mode

Using iOS Applications

Appendix

MIDI

Effect Block

This block applies effects to the output of the tone generator block as well as audio input block, processing and

enhancing the sound. Effects are applied in the final stages of editing, letting you change the sound as desired.

Effect structure

System Effects are applied to the overall sound. With System Effects, the sound of each Part is sent to

the effect according to the Effect Send Level for each Part. The processed sound (referred to as “wet”)

is sent back to the mixer according to the Return Level, and output—after being mixed with the

unprocessed “dry” sound. This instrument is equipped with Reverb and Chorus as System Effects. In

addition, you can set the Send Level from Chorus to Reverb. This parameter is used to apply Reverb to

the signals output from the Chorus. You can get a natural effect by applying Reverb depth to the Chorus

sound with the same level as that of the dry sound.

Insertion Effects can be applied individually to each of specified parts before merging signals of all

parts. It should be used for sounds for which you want to drastically change the character. Each Voice

features one set which has A and B units. You can set different Effect types to the Insertion Effects A and

B, or apply one Vocoder effect to Insertion Effects A and B. These settings can be set in the CONNECT

display (page 35) of the Voice Common Edit.

This synthesizer features eight sets of Insertion Effects (one set has A and B units). They can be applied

to all Parts of the Performance, and applied to eight Parts (maximum) of the Song/Pattern. Another

important Insertion Effect is the Vocoder, which can be applied only to one Part.

This block applies effects to the final stereo output signal of the entire sound. Multiple Effect types are

available.

Element EQ is applied to each Element of the Normal Voice and each key of the Drum Voice. You can

specify one of three different EQ shapes, including shelving and peaking.

NOTE

Element EQ does not affect the Input signals from the A/D INPUT [L]/[R] jacks.

This 3-band parametric EQ is applied to each part of the Performance/Mixing. The high band and low

band are of the shelving type. The middle band is the peaking type. The Common EQ parameters offset

the settings of the Part EQ parameters.

NOTE

Part EQ and Common EQ do not affect the Input signals from the A/D INPUT [L]/[R] jacks.

Master EQ is applied to the final (post-effect), overall sound of the instrument. In this EQ, all five bands

can be set to peaking, with shelving being available also for the lowest and highest bands.

System Effects – Reverb and Chorus

Insertion Effects

Master Effect

Element EQ

Part EQ/Common EQ

Master EQ

MOXF6/MOXF8 Reference Manual

19

Basic Structure

Functional blocks

Tone Generator block

A/D Input block

Sequencer block

Arpeggio block

Controller block

Effect block

Internal memory

Reference

Voice mo de

Performance mode

Song mode

Pattern mode

Mixing mode

Master mode

Remote mode

Utility mode

Quick setup

File mode

Using iOS Applications

Appendix

MIDI

Effect connection in each mode

Element EQ applied to each Element (for a Normal Voice)

and each Key (for a Drum Voice)

Settings:

Can be set in the EQ display (pages 46 and 51) of Voice

Element Edit/Voice Key Edit.

Common EQ applied to all Elements and Keys

Settings:

Set in the EQ display (page 32) of Voice Common Edit.

Selection of which Insertion Effect, A or B, is applied to

each Element/Key

Settings:

Set in “EL: OUT”(page 35) or “KEY: OUT”(page 48) in the

EFFECT display of Voice Common Edit, or set in

“InsEffectOut” (page 39) in the OSC display of Voice Element

Edit (or Key Edit).

NOTE These two display types are linked and feature the same settings,

only in different formats.

Insertion Effect A/B related parameters

Settings:

Set in the CONNECT display (page 35) and the INSA display/

INSB display (page 36) of Voice Common Edit.

Reverb and Chorus related parameters

Settings:

Set in the CONNECT display (page 35) and the CHORUS

display/REVERB display (page 36) of Voice Common Edit.

Master Effect related parameters

Settings:

Set in the MFX display (page 143) of the Utility mode.

Master EQ related parameters

Settings:

Set in the MEQ display (page 143) of the Utility mode.

NOTE Regarding the audio input signal from the A/D INPUT [L]/[R] jacks in

the Voice mode, the effect is set in the VCE A/D display of the Utility

mode. First, set the Insertion Effects. Then, making sure “Mode”

(page 146) is set to “1StereoRec” in the USB I/O display of the Utility

mode, set the level of the signal sent to Chorus and Reverb. When

“Mode” is set to “VST” or “2StereoRec,” the signal which is output

from the Insertion Effect will be directly output to the USB [TO HOST]

terminal or OUTPUT [L/MONO]/[R] jacks.

In the Voice mode

Element 1 – 8

Drum Key C0 – C6

Voice

Element or Key

Element EQ

Common EQ

Insertion A Insertion B

Send Level

Chorus

Reverb

Chorus

To R eve r b

Return Level

Master

Effect

Master EQ

MOXF6/MOXF8 Reference Manual

20

Basic Structure

Functional blocks

Tone Generator block

A/D Input block

Sequencer block

Arpeggio block

Controller block

Effect block

Internal memory

Reference

Voice mo de

Performance mode

Song mode

Pattern mode

Mixing mode

Master mode

Remote mode

Utility mode

Quick setup

File mode

Using iOS Applications

Appendix

MIDI

Part EQ applied to each Part

Settings:

Set in the EQ display (page 67) of Performance Part Edit.

Selection of the Parts to which the Insertion Effect is

applied

Settings:

Set in the INS SW display (page 64) of Performance

Common Edit.

Reverb and Chorus related parameters

Settings:

Set in the CONNECT display (page 63), CHORUS display

and REVERB display (page 64) of Performance Common

Edit, and the EF SEND display (page 66) of Performance Part

Edit.

Master Effect related parameters

Settings:

Set in the MFX display (page 60) of Performance Common

Edit.

Master EQ related parameters

Settings:

Set in the MEQ display (page 61) of Performance Common

Edit.

NOTE Regarding the audio input signal from the A/D INPUT [L]/[R] jacks in

the Performance mode, the effect is set in the A/D IN display of

Performance Common Edit. First, set the Insertion Effects. Then,

making sure that “Mode” (page 146) is set to “1StereoRec” in the

USB I/O display of the Utility mode, set the level of the signal sent to

Chorus and Reverb. When “Mode” is set to “VST” or “2StereoRec,”

the signal which is output from the Insertion Effect will be directly

output to the USB [TO HOST] terminal or OUTPUT [L/MONO]/[R]

jacks.

Part EQ applied to each Part

Settings:

Set in the EQ display (page 118) of Mixing Part Edit.

Selection of the Parts to which the Insertion Effect is

applied

Settings:

Set in the EFFECT display (page 116) of Mixing Common

Edit.

Reverb and Chorus related parameters

Settings:

Set in the EFFECT display (page 116) of Mixing Common

Edit.

Master Effect related parameters

Settings:

Set in the MFX display (page 116) of Mixing Common Edit.

Master EQ related parameters

Settings:

Set in the MEQ display (page 116) of Mixing Common Edit.

NOTE Regarding the audio input signal from the A/D INPUT [L]/[R] jacks in

the Song/Pattern mode, the effect is set in the A/D IN display of the

Mixing Common Edit. First, set the Insertion Effects. Then, making

sure that “Mode” (page 146) is set to “1StereoRec” in the USB I/O

display of the Utility mode, set the level of the signal sent to Chorus

and Reverb. When “Mode” is set to “VST” or “2StereoRec,” the

signal which is output from the Insertion Effect will be directly output

to the USB [TO HOST] terminal or OUTPUT [L/MONO]/[R] jacks.

In the Performance mode

In the Mixing mode

Voice

Part EQ

Insertion A/B

Part 1 – 4

A/D Part

Master

Effect

Master EQ

Reverb

Chorus

Send Level

Chorus

To Re ve r b

Return Level

Performance

Part

Part EQ

Voice

Insertion A/B

Part 1 – 16

A/D Part

Master

Effect

Master EQ

Reverb

Chorus

Send Level

Chorus

To Re ve r b

Return Level

Mixing

Sivu latautuu...

Yamaha MOXF8 Ohjekirja

Tämä ohje sopii myös

Yamaha MOXF8 Ohjekirja

muilla kielillä

Aiheeseen liittyviä papereita