Yamaha YDP-162/142 Omistajan opas

Kategoria
Digital pianos
Tyyppi
Omistajan opas

Tämä käsikirja sopii myös

Mode d’emploi
Manual de instrucciones
ENGLISHFRANÇAIS
Para información sobre el montaje del soporte del teclado, consulte las instrucciones al final de este manual.
Pour obtenir des informations sur l'assemblage du support du clavier, reportez-vous aux instructions à la fin de ce manuel.
EN
ES
FR
For information on assembling the keyboard stand, refer to the instructions at the end of this manual.
YDP-162
YDP-142
Owner’s Manual
ESPAÑOL
YDP-162/142 Owner’s Manual
2
ENGLISH
Table of Contents
PRECAUTIONS ........................................ 5
About the Manuals................................. 7
Included Accessories .............................. 7
Panel Controls and Terminals ................ 8
Basic Operations
Setting Up .............................................. 9
Key Cover ......................................................................9
Music Rest .....................................................................9
Turning the Power On .................................................10
Auto Power Off ............................................................11
Using Headphones.......................................................11
Playing the Piano ................................. 12
Setting the Volume ......................................................12
Intelligent Acoustic Control (I.A.C.)..............................12
Using the Pedals ..........................................................13
Using the Damper Resonance ......................................13
Using the Metronome..................................................14
Changing the Touch Sensitivity....................................15
Maintenance ........................................ 15
Advanced Operations
Playing Various Musical Instrument
Sounds (Voices).................................... 16
Selecting a Voice..........................................................16
Listening to the Demo Songs .......................................17
Adding Variations to the Sound (Reverb)......................18
Transposing the Pitch in Semitones ..............................19
Fine-tuning the Pitch ...................................................19
Layering Two Voices (Dual mode) ................................20
Playing Duo .................................................................21
Song Playback and Practice..................22
Listening to 50 Preset Songs ........................................22
Practicing a One-Hand Part..........................................23
Playing from the top of the bar including
a rest or blank..............................................................23
Recording Your Performance ...............24
Recording Your Performance........................................24
Changing the Initial Settings of the Recorded Song .....25
Deleting Recorded Data...............................................25
Backing up Data and Initializing the
Settings .................................................26
Data Maintained When Power is Turned Off ................26
Saving the User Song data to a computer ....................26
Transferring SMF Files Between a Computer and this
Instrument...................................................................26
Initializing the Settings.................................................26
Appendix
Troubleshooting ...................................27
Keyboard Stand Assembly....................28
Specifications ........................................32
Index .....................................................33
ENGLISH
SPECIAL MESSAGE SECTION
This product utilizes batteries or an external power supply
(adapter). DO NOT connect this product to any power supply or
adapter other than one described in the manual, on the name
plate, or specifically recommended by Yamaha.
WARNING:
Do not place this product in a position where
anyone could walk on, trip over, or roll anything over power or
connecting cords of any kind. The use of an extension cord is
not recommended! If you must use an extension cord, the
minimum wire size for a 25’ cord (or less ) is 18 AWG. NOTE: The
smaller the AWG number, the larger the current handling
capacity. For longer extension cords, consult a local electrician.
This product should be used only with the components supplied
or; a cart, rack, or stand that is recommended by Yamaha. If a
cart, etc., is used, please observe all safety markings and
instructions that accompany the accessory product.
SPECIFICATIONS SUBJECT TO CHANGE:
The information contained in this manual is believed to be
correct at the time of printing. However, Yamaha reserves the
right to change or modify any of the specifications without notice
or obligation to update existing units.
This product, either alone or in combination with an amplifier and
headphones or speaker/s, may be capable of producing sound
levels that could cause permanent hearing loss. DO NOT
operate for long periods of time at a high volume level or at a
level that is uncomfortable. If you experience any hearing loss or
ringing in the ears, you should consult an audiologist.
IMPORTANT: The louder the sound, the shorter the time period
before damage occurs.
Some Yamaha products may have benches and / or accessory
mounting fixtures that are either supplied with the product or as
optional accessories. Some of these items are designed to be
dealer assembled or installed. Please make sure that benches
are stable and any optional fixtures (where applicable) are well
secured BEFORE using.
Benches supplied by Yamaha are designed for seating only. No
other uses are recommended.
NOTICE:
Service charges incurred due to a lack of knowledge relating to
how a function or effect works (when the unit is operating as
designed) are not covered by the manufacturer’s warranty, and
are therefore the owners responsibility. Please study this manual
carefully and consult your dealer before requesting service.
ENVIRONMENTAL ISSUES:
Yamaha strives to produce products that are both user safe and
environmentally friendly. We sincerely believe that our products
and the production methods used to produce them, meet these
goals. In keeping with both the letter and the spirit of the law, we
want you to be aware of the following:
Battery Notice:
This product MAY contain a small non-rechargeable battery
which (if applicable) is soldered in place. The average life span
of this type of battery is approximately five years. When
replacement becomes necessary, contact a qualified service
representative to perform the replacement.
This product may also use “household” type batteries. Some of
these may be rechargeable. Make sure that the battery being
charged is a rechargeable type and that the charger is intended
for the battery being charged.
When installing batteries, never mix old batteries with new ones,
and never mix different types of batteries. Batteries MUST be
installed correctly. Mismatches or incorrect installation may result
in overheating and battery case rupture.
Warning:
Do not attempt to disassemble, or incinerate any battery. Keep
all batteries away from children. Dispose of used batteries
promptly and as regulated by the laws in your area. Note: Check
with any retailer of household type batteries in your area for
battery disposal information.
Disposal Notice:
Should this product become damaged beyond repair, or for
some reason its useful life is considered to be at an end, please
observe all local, state, and federal regulations that relate to the
disposal of products that contain lead, batteries, plastics, etc. If
your dealer is unable to assist you, please contact Yamaha
directly.
NAME PLATE LOCATION:
The name plate is located on the bottom of the product. The
model number, serial number, power requirements, etc., are
located on this plate. You should record the model number, serial
number, and the date of purchase in the spaces provided below
and retain this manual as a permanent record of your purchase.
Model
Serial No.
Purchase Date
92-BP (bottom)
PLEASE KEEP THIS MANUAL
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party : Yamaha Corporation of America
Address : 6600 Orangethorpe Ave., Buena
Park, Calif. 90620
Telephone : 714-522-9011
Type of Equipment : Digital Piano
Model Name : YDP-162, YDP-142
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received
including interference that may cause undesired opera-
tion.
See user manual instructions if interference to radio recep-
tion is suspected.
OBSERVERA!
Apparaten kopplas inte ur växelströmskällan (nätet) så
länge som den ar ansluten till vägguttaget, även om själva
apparaten har stängts av.
ADVARSEL: Netspændingen til dette apparat er IKKE
afbrudt, sålænge netledningen sidder i en stikkontakt, som
er tændt — også selvom der er slukket på apparatets
afbryder.
VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei
irroita koko laitetta verkosta.
(standby)
FCC INFORMATION (U.S.A.)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements. Modifi-
cations not expressly approved by Yamaha may void your
authority, granted by the FCC, to use the product.
2.
IMPORTANT: When connecting this product to acces-
sories and/or another product use only high qu ality
shielded cables. Cable/s supplied with this product MUST
be used. Follow all installation instructions. Failure to follow
instructions could void your FCC authorization to use this
product in the USA.
3.
NOTE: This product has been tested and found to com-
ply with the requirements listed in FCC Regulations, Part
15 for Class “B” digital devices. Compliance with these
requirements provides a reasonable level of assurance
that your use of this product in a residential environment
will not result in harmful interference with other electronic
devices. This equipment generates/uses radio frequencies
and, if not installed and used according to the instructions
found in the users manual, may cause interference harmful
to the operation of other electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product is
found to be the source of interference, which can be deter-
mined by turning the unit “OFF” and “ON”, please try to elim-
inate the problem by using one of the following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to dis-
tribute this type of product. If you can not locate the appro-
priate retailer, please contact Yamaha Corporation of
America, Electronic Service Division, 6600 Orangethorpe
Ave, Buena Park, CA90620
The above statements apply ONLY to those products dis-
tributed by Yamaha Corporation of America or its subsid-
iaries.
* This applies only to products distributed by
YAMAHA CORPORATION OF AMERICA.
(FCC DoC)
YDP-162/142 Owner’s Manual
ENGLISH
DMI-5 1/2
5
ENGLISH
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe and handy place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
Do not place the power cord near heat sources such as heaters or radiators. Also, do
not excessively bend or otherwise damage the cord, or place heavy objects on it.
Only use the voltage specified as correct for the instrument. The required voltage is
printed on the name plate of the instrument.
Use the specified adaptor (page 32) only. Using the wrong adaptor can result in
damage to the instrument or overheating.
Check the electric plug periodically and remove any dirt or dust which may have
accumulated on it.
This instrument contains no user-serviceable parts. Do not open the instrument or
attempt to disassemble or modify the internal components in any way. If it should
appear to be malfunctioning, discontinue use immediately and have it inspected by
qualified Yamaha service personnel.
Do not expose the instrument to rain, use it near water or in damp or wet conditions,
place on it any containers (such as vases, bottles or glasses) containing liquids
which might spill into any openings. If any liquid such as water seeps into the
instrument, turn off the power immediately and unplug the power cord from the AC
outlet. Then have the instrument inspected by qualified Yamaha service personnel.
Never insert or remove an electric plug with wet hands.
Do not put burning items, such as candles, on the unit. A burning item may fall over
and cause a fire.
When one of the following problems occur, immediately turn off the power switch
and disconnect the electric plug from the outlet. Then have the device inspected by
Yamaha service personnel.
- The power cord or plug becomes frayed or damaged.
- It emits unusual smells or smoke.
- Some object has been dropped into the instrument.
- There is a sudden loss of sound during use of the instrument.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:
Do not connect the instrument to an electrical outlet using a multiple-connector.
Doing so can result in lower sound quality, or possibly cause overheating in the
outlet.
When removing the electric plug from the instrument or an outlet, always hold the
plug itself and not the cord. Pulling by the cord can damage it.
Remove the electric plug from the outlet when the instrument is not to be used for
extended periods of time, or during electrical storms.
Read carefully the attached documentation explaining the assembly process. Failure
to assemble the instrument in the proper sequence might result in damage to the
instrument or even injury.
Do not place the instrument in an unstable position where it might accidentally fall
over.
When transporting or moving the instrument, always use two or more people.
Attempting to lift the instrument by yourself may damage your back, result in other
injury, or cause damage to the instrument itself.
Before moving the instrument, remove all connected cables, to prevent damage to
the cables or injury to anyone who might trip over them.
When setting up the product, make sure that the AC outlet you are using is easily
accessible. If some trouble or malfunction occurs, immediately turn off the power
switch and disconnect the plug from the outlet. Even when the power switch is
turned off, electricity is still flowing to the product at the minimum level. When you
are not using the product for a long time, make sure to unplug the power cord from
the wall AC outlet.
Use only the stand specified for the instrument. When attaching the stand or rack,
use the provided screws only. Failure to do so could cause damage to the internal
components or result in the instrument falling over.
Power supply/AC power adaptor
Do not open
Water warning
Fire warning
If you notice any abnormality
Power supply/AC power adaptor
Assembly
Location
YDP-162/142 Owner’s Manual
6
ENGLISH
DMI-5 2/2
Before connecting the instrument to other electronic components, turn off the power
for all components. Before turning the power on or off for all components, set all
volume levels to minimum.
Be sure to set the volumes of all components at their minimum levels and gradually
raise the volume controls while playing the instrument to set the desired listening
level.
Do not insert a finger or hand in any gaps on the key cover or instrument. Also take
care that the key cover does not pinch your finger.
Never insert or drop paper, metallic, or other objects into the gaps on the key cover,
panel or keyboard. This could cause physical injury to you or others, damage to the
instrument or other property, or operational failure.
Do not rest your weight on, or place heavy objects on the instrument, and do not use
excessive force on the buttons, switches or connectors.
Do not use the instrument/device or headphones for a long period of time at a high
or uncomfortable volume level, since this can cause permanent hearing loss. If you
experience any hearing loss or ringing in the ears, consult a physician.
Do not place the bench in an unstable position where it might accidentally fall over.
Do not play carelessly with or stand on the bench. Using it as a tool or stepladder or
for any other purpose might result in accident or injury.
Only one person should sit on the bench at a time, in order to prevent the possibility
of accident or injury.
If the bench screws become loose due to extensive long-term use, tighten them
periodically using the included tool.
Keep special watch over any small children so that they don’t fall off the rear of the
bench. Since the bench does not have a backrest, unsupervised use may result in
accident or injury.
Always turn the power off when the instrument is not in use.
Even when the [ ] (Standby/On) switch is in standby status (power lamp is off), electricity is still flowing to the instrument at the minimum level.
When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.
NOTICE
To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the
notices below.
Handling and Maintenance
Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices.
Otherwise, the instrument, TV, or radio may generate noise. When you use the instrument along with the application on
your iPhone/iPad, we recommend that you set “Airplane Mode” to “ON” on your iPhone/iPad in order to avoid noise
caused by communication.
Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a
heater, or in a car during the day) to prevent the possibility of panel disfiguration, damage to the internal components or
unstable operation. (Verified operating temperature range: 5° – 40°C, or 41° – 104°F.)
Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.
In the case of a model with a polished finish, bumping the surface of the instrument with metal, porcelain, or other hard
objects can cause the finish to crack or peel. Use caution.
During extreme changes in temperature or humidity, condensation may occur and water may collect on the surface of the
instrument. If water is left, the wooden parts may absorb the water and be damaged. Make sure to wipe any water off
immediately with a soft cloth.
Saving data
Saved data may be lost due to malfunction or incorrect operation. Save important data to external device such as a
computer (see online manual, Computer-related Operations; page 7).
Information
About copyrights
Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly
prohibited except for your personal use.
This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with
respect to which it has license to use others’ copyrights. Such copyrighted materials include, without limitation, all
computer software, style files, MIDI files, WAVE data, musical scores and sound recordings. Any unauthorized use of
such programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright has
legal consequences. DON’T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.
About functions/data bundled with the instrument
Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original.
About this manual
The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat different from
those on your instrument.
The company names and product names in this manual are the trademarks or registered trademarks of their respective
companies.
Connections
Handling caution
Using the bench (If included)
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
YDP-162/142 Owner’s Manual
7
ENGLISH
About the Manuals
This instrument has the following manuals.
Included Manuals
Owner’s Manual (this book)
Explains how to use the instrument.
Quick Operation Guide (separate sheet)
Shows in chart form the functions assigned to the buttons and the keyboard for quick understanding.
Online Manuals (PDF)
Computer-related Operations
Includes instructions on connecting this instrument to a computer, and operations related to transferring song
data, as well as MIDI functions such as MIDI channel and Local Control settings.
MIDI Reference
Contains the MIDI Data Format and MIDI Implementation chart.
MIDI Basics (only in English, French and German)
Contains basic explanations about MIDI.
To obtain these manuals, access the Yamaha Downloads website, select your country, enter “YDP-142” or “YDP-162” in
the Model Name box, then click [SEARCH].
Included Accessories
*1 You will need the PRODUCT ID on the sheet in order to fill out the User Registration form.
*2 May not be included depending on your particular area. Please check with your Yamaha dealer.
Yamaha Downloads
http://download.yamaha.com/
Thank you for choosing the Yamaha ARIUS.
In order to make the most of the performance potential and features of the instrument,
please read the manuals thoroughly, and keep them in a handy place for later reference.
Owner’s Manual (this book)
Quick Operation Guide (separate sheet)
“50 Greats for the Piano” (music book)
Online Member Product Registration*
1
AC power adaptor *
2
Power cord (YDP-162 only)
Bench *
2
YDP-162/142 Owner’s Manual
8
ENGLISH
Panel Controls and Terminals
The illustrations are taken from the YDP-142.
PHONESPHONESPHONESPHONES
TO PEDAL
12V
TO PEDAL
16V
Rear
(Keyboard side)
Rear
(Keyboard side)
Rear
(Keyboard side)
YDP-142
YDP-162
[ ] (Standby/On) switch..................... page 10
For turning the power on or setting to standby.
[MASTER VOLUME] knob.................... page 12
For adjusting the volume of the entire sound.
[DEMO/SONG] button .................. pages 17, 22
For playing the Demo Songs and the Preset Songs.
[PIANO/VOICE] button ............pages 16, 18, 20
For selecting a single Voice, two Voices for layering or
a Reverb Type.
[METRONOME] button......................... page 14
For starting or stopping the metronome.
[+R], [–L] buttons ....................pages 16, 19, 23
In general, these are for selecting the next or
previous Voice.
During Song playback, these are for selecting the
next or previous Song, and (while holding down
[PLAY]) turning on/off the right-hand and left-hand
Parts individually.
During Metronome playback, these are for
increasing or decreasing the Tempo.
[REC] button......................................... page 24
For recording your keyboard performance.
[PLAY] button ........................................page 25
For playing back the recorded performance.
[FUNCTION] .........................................page 19
Simultaneously holding these two buttons and
pressing the specified key sets will set the MIDI or
Transpose parameters.
[PHONES] jacks .................................... page 11
For connecting a set of standard stereo headphones.
[USB TO HOST] terminal
For connecting to a computer. For details, refer to
“Computer-related Operations” (page 7).
NOTICE
Use an AB type USB cable of less than 3 meters. USB
3.0 cables cannot be used.
[TO PEDAL] jack ...................................page 30
For connecting the Pedal Cord.
DC IN jack..............................................page 10
For connecting the power adaptor.
Pedals ....................................................page 13
For controlling expression and sustain, just as on an
acoustic piano.
YDP-162/142 Owner’s Manual
Basic Operations
9
ENGLISH
Setting Up
Key Cover
To open the key cover:
Lift the cover slightly, then push and slide it to the
end.
To close the key cover:
Slide the cover toward you and gently lower the
cover over the keys.
CAUTION
Hold the cover with both hands when opening or closing it. Do not release it until it is fully opened or closed. Be careful to
avoid catching fingers (yours or others, especially children’s) between the cover and main unit.
Do not place objects, such as a piece of metal or paper, on top of the key cover. Small objects placed on the key cover
may fall inside the unit when the cover is opened and may be nearly impossible to remove. This could cause electric
shock, short circuit, fire or other serious damage to the instrument.
Music Rest
To raise the music rest:
1 Pull the music rest up and toward yourself as
far as it will go.
2 Flip down the two metal supports at the left
and right on the rear of the music rest.
3 Lower the music rest so that it rests on the
metal supports.
To lower the music rest:
1 Pull the music rest toward yourself as far as it
will go.
2 Raise the two metal supports (at the rear of the
music rest).
3 Gently lower the music rest backward until it is
all the way down.
CAUTION
Do not try to use the music rest in a half-raised position. When lowering the music rest, do not release your hands from
the music rest until it is all the way down.
CAUTION
Be careful to avoid catching your fingers
when opening or closing the cover.
1
2
3
YDP-162/142 Owner’s Manual
10
Basic Operations
ENGLISH
Turning the Power On
1 Connect the plugs of the AC power adaptor in the order shown in the illustration.
WARNING
Use the specified adaptor (page 32) only. The use of other adaptors may result in irreparable damage to both the adaptor
and the instrument.
CAUTION
Remove the AC plug from the AC outlet when the instrument is not to be used for extended periods of time, or during
electrical storms.
NOTE
Follow this procedure in reverse order when disconnecting the power adaptor.
2 Press the [ ] (Standby/On) switch to turn the power on.
Power indicator
If you close the key cover without turning the power to standby, the power indicator remains lit, indicating that the power
is still on.
When you’re ready to turn the power to standby, press the [ ] (Standby/On) switch again for a second. The power
indicator turns off.
CAUTION
Even when the [ ] (Standby/On) switch is in the standby status, electricity is still flowing to the instrument at a minimum
level. When not using the instrument for an extended period of time, be sure to unplug the power cord from the wall AC
outlet.
16
1
2
3
Power cord
AC outlet
AC power
adaptor
DC IN jack
(page 8)
1
2
AC outlet
AC power
adaptor
DC IN jack
(page 8)
The shape of the plug and outlet differ
depending on locale.
[YDP-162] [YDP-142]
Power indicator
(Standby/On) switch
YDP-162/142 Owner’s Manual
Basic Operations
11
ENGLISH
Auto Power Off
NOTE
Default setting:
Enable
To prevent unnecessary power consumption, this instrument features an Auto Power Off
function that automatically turns the power off if the instrument is not operated for
approximately 30 minutes. If you do not want to use the Auto Power Off function, disable
the function as described below. The setting (disabled or enabled) is retained even if the
power is turned off.
Disabling Auto Power Off
Turn the power of the instrument off. Then, while holding down
the lowest key, press the [ ] (Standby/On) switch to turn on the
power again so that the [REC] indicator flashes three times,
indicating that the Auto Power Off function has been disabled.
You can also disable the Auto Power Off function without turning
the power off, by simultaneously holding down [DEMO/SONG]
and [PIANO/VOICE] and pressing the A
5 key.
Re-enabling Auto Power Off
To enable the Auto Power Off function again, simultaneously hold
down [DEMO/SONG] and [PIANO/VOICE] and press the A5 key.
Using Headphones
Since this instrument is equipped with two [PHONES] jacks, you can
connect two sets of standard stereo headphones. If you are using only
one set of headphones, insert a plug into either jack, which
automatically shuts off the speakers.
CAUTION
Do not use headphones at a high volume for an extended period of
time; doing so may cause hearing loss.
Using the headphone hanger (for YDP-162 only)
You can hang the headphones on this instrument. Refer to “Keyboard
Stand Assembly” on page 28 for instructions on installing the
headphone hanger.
NOTICE
Do not hang anything other than the headphones on the hanger.
Doing so may damage this instrument or the hanger.
Lowest key
Highest key
A
5
Highest key
A5
PHONES
Standard stereo phone plug
Bottom surface
Basic Operations
12
YDP-162/142 Owner’s Manual
ENGLISH
Playing the Piano
Setting the Volume
When you start playing, use the [MASTER VOLUME] knob to adjust the volume of the entire keyboard sound.
CAUTION
Do not use this instrument at a high volume level for a long period of time, or your hearing may be damaged.
Intelligent Acoustic Control (I.A.C.)
Default setting: OnWith this function, the sound quality of this instrument is automatically adjusted and
controlled according to the overall volume. Even when the volume is low, this lets you hear
both low sounds and high sounds clearly.
To turn on I.A.C.:
While holding down [PIANO/VOICE], press
the F
0 key.
To turn off I.A.C.:
While holding down [PIANO/VOICE], press
the F0 key.
Setting range:
A-1 (–3) ~ D
0 (+3)
Default Setting: C0 (0)
To adjust I.A.C. Depth:
While holding down [PIANO/VOICE] press
one of the A-1 - D
0 keys.
The higher the value, the more clearly that low and high sounds are heard at lower volume
levels.
Level
decreases.
Level
increases.
F
#
0
Lowest key
F0 Lowest key
C0: depth 0
Lowest key
A-1: depth –3
D
0: depth +3
(Standard setting)
YDP-162/142 Owner’s Manual
Basic Operations
13
ENGLISH
Using the Pedals
NOTE
If the damper pedal doesn’t
work, make sure that the
pedal cord is properly
plugged into the main unit
(page 30).
NOTE
While the sostenuto pedal is
held, the organ and strings
Voices sound continuously
without decay after the notes
have been released.
Damper Pedal (Right)
Pressing this pedal will sustain notes longer. Releasing
this pedal immediately stops (damps) any sustained
notes. This pedal also features a “half-pedal” function
that creates partial sustain effects, depending on how
far down you press the pedal.
Sostenuto Pedal (Center)
Pressing this pedal while holding the notes will sustain
the pressed notes (as if the Damper Pedal had been
pressed), but all subsequently played notes will not be
sustained. This makes it possible to sustain a chord or
single low note, for example, while the other notes are
played “staccato.”
Soft Pedal (Left)
Pressing this pedal will reduce the volume and slightly change the timbre of the notes. The
notes played before this pedal is pressed are not affected. When you select the Jazz
Organ Voice, pressing the left pedal switches between fast/slow rotation of the rotary
speaker (page 16).
Using the Damper Resonance
The Damper Resonance effect simulates the sustain sound of the damper pedal on a grand piano, as if you were pressing
the damper pedal and playing the keyboard. This effect is applied to the entire sound of the instrument.
Default setting:
OnTo turn on the Damper Resonance:
While holding [PIANO/VOICE], press the G
2 key.
To turn off the Damper Resonance:
While holding [PIANO/VOICE], press the G2 key.
Half-pedal function
This function allows you to
vary the sustain length
depending on how far the
pedal is pressed. The
farther down you press the
pedal, the more the sound
sustains. For example, if
you press the damper pedal
and all notes you are
playing sound a bit murky
and loud with too much
sustain, you can release the
pedal half way or higher to
decrease the sustain
(murkiness).
When you press the damper
pedal here, this note and the
notes you play before you
release the pedal sustain longer.
When you press the sostenuto
pedal here while holding the
note, the note will sustain as
long as you hold the pedal.
Lowest key
G2
(Off)
G
2
(On)
Basic Operations
14
YDP-162/142 Owner’s Manual
ENGLISH
Using the Metronome
The metronome feature is convenient for practicing with an accurate tempo.
1 Press [METRONOME] to start the Metronome.
2 Press [METRONOME] to stop the Metronome.
Default setting: 0 (C3)
Selecting a Beat
While holding down [METRONOME], press one of the C3-F3 keys.
Adjusting the Tempo
The Metronome tempo can be set from 5 to 280 beats per minute.
To increase or decrease the value by 1:
While the metronome is playing, press [+R] to increase or [–L] to decrease. Alternatively,
press and hold down [METRONOME], and press the C
5 key to increase or B4 key to
decrease.
To increase or decrease the value by 10:
While holding down [METRONOME], press the D5 key to increase or the A
4 key to decrease.
To specify a three-digit value:
While holding down [METRONOME], press the relevant C4–A4 keys one by one in order.
For example to specify “95,” press the C4 (0), A4 (9) and F4 (5) keys in order.
Resetting the value to the default (120)
While holding down [METRONOME], press the [+R] and [–L] simultaneously, or press the
C5 (default) key.
Setting range:
C1 (1) ~ G2 (20)
Default setting:
D2 (15)
Adjusting the Volume
While holding down [METRONOME], press one of the keys between C1 and G2 to set the
volume of the metronome. Pressing a higher key results in higher volume, while pressing a
lower key results in lower volume.
024579
8631
24 7
1356
9
11
8
10
12
14 16 19
15 17 18 2013
C
3
C3
Highest key
D
3
D3 E3 F3
A
4
C4
C
5
F4 A4
C5
D5B4Lowest key C1 G2
Adjusting the Metronome
Volume
Selecting
a Beat
Adjusting
the Tempo
Key Beat
C3 0
C
32
D3 3
D
34
E3 5
F3 6
YDP-162/142 Owner’s Manual
Basic Operations
15
ENGLISH
Changing the Touch Sensitivity
You can specify the Touch Sensitivity (how the sound responds to the way you play the keys).
NOTE
This setting is disabled with
some Voices, such as an
organ sound.
Default setting:
B6 (Medium)
While holding down [PIANO/VOICE], press one of the A6-C7 keys.
Maintenance
To keep your ARIUS in optimum condition, we recommend that you periodically follow the maintenance points below.
Instrument and Bench Maintenance
When cleaning the instrument, use a soft, dry or slightly damp cloth.
NOTICE
Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths.
In the case of a model with a polished finish, gently remove dust and dirt with a soft cloth. Do not wipe too hard since
small particles of dirt can scratch the instrument’s finish.
To keep the surface polished, apply commercially available piano polisher to a soft cloth and wipe the instrument’s
surface with it. Then, polish it with a separate cloth. Before using any piano polisher, make sure to read the instructions
for proper usage.
Tighten the screws of the instrument and bench periodically.
Pedal Cleaning
As with an acoustic piano, pedals may become tarnished over years of use. When this occurs, polish the pedal with a
compound designed for piano pedals. Before using the compound, make sure to read the instructions for proper usage.
Tuning
Unlike an acoustic piano, this instrument does not need to be tuned by an expert (although the pitch can be user-adjusted
to match other instruments). This is because the pitch of digital instruments is always maintained perfectly.
When transporting
You can load this instrument onto a truck, either fully
assembled or disassembled. When doing so, do not lean
the instrument (especially the keyboard unit) against a
wall, and make sure to lay it horizontally in the truck. When
transporting by truck, do not subject the instrument to
excessive vibration or shock. If you transport the
instrument fully assembled, make sure to check all the
screws then tighten them as necessary.
A6 C7
B6
A
6
Key Touch Sensitivity Description
A6 Fixed
The volume level does not change at all regardless of whether you play the keyboard soft
or hard.
A
6SoftThe volume level does not change much when you play the keyboard soft or hard.
B6 Medium This is the standard piano touch response.
C7 Hard
The volume level changes very widely from pianissimo to fortissimo to facilitate dynamic
and dramatic expression. You have to hit the keys hard to produce a loud sound.
Advanced Operations
16
YDP-162/142 Owner’s Manual
ENGLISH
Playing Various Musical Instrument Sounds
(Voices)
Selecting a Voice
NOTE
To hear the characteristics of
the Voices, play back the
Demo Songs (page 17).
To select “Grand Piano 1”:
Simply press [PIANO/VOICE].
To select another Voice:
After pressing [PIANO/VOICE], press [+R] or [–L] to select the next or previous Voice.
To select a specific Voice:
While holding down [PIANO/VOICE], press one of the C1–A1 keys. For details on which
Voice is assigned to each key, see the list below.
Voice List
C
1D
1F
1G
1
C1 D1 E1 F1 G1 A1
Lowest key
Key Voice Name Voice description
C1 Grand Piano 1
This sound was sampled from a full concert grand piano. It uses different samples
depending on the strength of your playing and produces smoother tonal changes.
Suitable not only for classical compositions but also for piano pieces of any style.
C
1 Grand Piano 2 Warm and soft piano sound. Good for playing ballads.
D1 Grand Piano 3 Spacious and clear piano with bright reverb. Good for popular music.
D
1 E.Piano 1 An electronic piano sound created by FM synthesis. Good for standard popular music.
E1 E.Piano 2
The sound of an electric piano using hammer-struck metallic “tines.” Soft tone when
played lightly, and an aggressive tone when played hard.
F1 Harpsichord
The definitive instrument for baroque music. Since harpsichord uses plucked strings,
there is no touch response. There is, however, a characteristic additional sound when
the keys are released.
F
1 Vibraphone
Vibraphone played with relatively soft mallets. The tone becomes more metallic the
harder you play.
G1 Pipe Organ
This is a typical pipe organ sound (8 feet + 4 feet + 2 feet). Good for sacred music
from the Baroque period.
G
1 Jazz Organ
The sound of a “tonewheel” type electric organ. Often heard in jazz and rock music.
The rotary speed of the rotary speaker effect can be switched by using the left pedal.
A1 Strings
Stereo-sampled, large-scale strings ensemble with realistic reverb. Try combining this
Voice with piano in the Dual mode.
YDP-162/142 Owner’s Manual
Advanced Operations
17
ENGLISH
Listening to the Demo Songs
NOTE
If you want to change the
playback tempo, see page 14.
Special individual Demo Songs are provided for all of the instrument Voices.
1 Press [DEMO/SONG] to start playback.
The [PLAY] lamp lights up, and the Demo Song for the current Voice starts.
Starting with the selected song, the playback of the Demo Songs will continue. After
the last demo song, the sequence then returns to the first Demo Song and repeats
until you stop it.
To change the Demo Song during playback:
Press the [+R] or [–L] to change to the next or previous Demo Song. To change to a
specific Demo Song, press and hold down the [DEMO/SONG], then press one of
the C1 - A1 keys.
2 Press [DEMO/SONG] or [PLAY] to stop playback.
The [PLAY] lamp turns off.
Demo Song List
The Demo Songs excluding original Songs are short rearranged excerpts from the original compositions. The original
Demo Songs are Yamaha originals (©2012 Yamaha Corporation).
Lowest key C1 F1 A1
Key Voice Name Title Composer
C1 Grand Piano 1 Mazurka No.5 op.7-1 F. F. Chopin
C
1 Grand Piano 2 Von fremden Landern und Menchen, Kinderszenen op.15-1 R. Schumann
D1 Grand Piano 3 Original Original
D
1 E.Piano 1 Original Original
E1 E.Piano 2 Original Original
F1 Harpsichord
Concerto a cembalo obbligato, 2 violini, viola e continuo No.7,
BWV.1058
J. S. Bach
F
1 Vibraphone Original Original
G1 Pipe Organ Herr Christ, der ein'ge Gottes-Sohn, BWV.601 J.S.Bach
G
1 Jazz Organ Original Original
A1 Strings Original Original
Advanced Operations
18
YDP-162/142 Owner’s Manual
ENGLISH
Adding Variations to the Sound (Reverb)
This instrument features several Reverb Types that add extra depth and expression to the sound to create a realistic
acoustic ambience. The appropriate Reverb Type and Depth are called up automatically when you select each of the
Voices and Songs. This is why the Reverb Type need not be selected; however, you can change it if desired.
[REVERB] in Dual Mode
An optimum reverb type for
the combination of Voices is
assigned automatically.
To select a Reverb Type:
While holding down [PIANO/VOICE], press one of the C2–E2 keys.
Reverb Type List
To adjust Reverb Depth:
Reverb Depth range:
0 (no effect) - 20 (maximum
depth)
While holding down [PIANO/VOICE], press one of the C3–G
4 keys. The Depth value
increases as you press higher keys.
While holding down [PIANO/VOICE], press the A4 key to set the Reverb Depth to the most
suitable value for the current Voice.
Lowest key
C3: depth 0
G
4: depth 20
A4
The depth value increases as you
press higher keys.
C
2D
2
C2 D2 E2
Selecting a
Reverb Type
Adjusting
Reverb Depth
Highest key
Key Reverb Type Description
C2 Room
Adds a continuous reverb effect to the sound, similar to the
acoustic reverberation you would hear in a room.
C
2Hall1
For a “bigger” reverb sound, use the Hall1 setting. This effect
simulates the natural reverberation of a small-size concert
hall.
D2 Hall2
For a truly spacious reverb sound, use the Hall2 setting. This
effect simulates the natural reverberation of a large concert
hall.
D
2 Stage Simulates the reverb of a stage environment.
E2 Off No effect is applied.
YDP-162/142 Owner’s Manual
Advanced Operations
19
ENGLISH
Transposing the Pitch in Semitones
You can shift the pitch of the entire keyboard up or down in semitones in order to facilitate playing in difficult key signatures,
or to easily match the pitch of the keyboard to the range of a singer or other instruments. For example, if “+5” is selected,
playing key C produces pitch F, letting you play a song of F major as though it were in C major.
To transpose the pitch down:
While holding down [DEMO/SONG] and [PIANO/VOICE], press a key between F
2 (–6) and B2 (–1).
To transpose the pitch up:
While holding down [DEMO/SONG] and [PIANO/VOICE], press a key between C
3 (+1) and F
3 (+6).
To restore the normal pitch:
While holding down [DEMO/SONG] and [PIANO/VOICE], press the C3 key.
Fine-tuning the Pitch
You can fine-tune the pitch of the entire instrument in about 0.2 Hz steps. This lets you match the keyboard pitch finely to
that of other instruments or CD music.
Setting range:
414.8 – 466.8 Hz
Default Setting:
A3 = 440.0 Hz
To tune up (in about 0.2 Hz steps):
Press and hold down the [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press
[+R].
To tune down (in about 0.2 Hz steps):
Press and hold down the [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press
[–L].
To set the pitch to 442.0 Hz:
Press and hold down the [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press
the A0 key.
To restore default pitch:
Press and hold down the [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press
[+R] and [–L] simultaneously.
-5 -3 -1 0 +2 +4 +5
-6 -4 -2 +1
+3 +6
F
2C3
Lowest key
F
3
Transpose down Transpose up
Normal pitch
Hz (Hertz):
This unit of measurement
refers to the frequency of a
sound and represents the
number of times a sound
wave vibrates in a second.
A0
Lowest key
Advanced Operations
20
YDP-162/142 Owner’s Manual
ENGLISH
Layering Two Voices (Dual mode)
You can layer two Voices and play them simultaneously to create a more richly textured sound.
1 Engage the Dual mode.
While holding down [PIANO/VOICE], simultaneously hold down two keys between
C1 and A1 to select the two desired Voices. For information on which Voices are
assigned to the keys, refer to “Voice List” (page 16).
NOTE
The Dual and Duo modes
(page 21) cannot be engaged
at the same time.
The Voice assigned to the lower key will be designated as Voice 1, and the Voice
assigned to the higher key will be designated as Voice 2. You cannot assign the
same Voice to both Voice 1 and Voice 2 simultaneously in Dual mode.
To shift the Octave for each Voice:
While holding down [PIANO/VOICE], press one of the C5-F5 keys.
To adjust the Balance between two Voices:
While holding down [PIANO/VOICE], press one of the F
5–F
6 keys.
A setting of “0” produces an equal balance between two Voices. Settings below “0”
increase the volume of Voice 2 while settings above “0” increase the volume of
Voice1, in relation to the other.
2 To exit from Dual mode, press [PIANO/VOICE].
-5
-60-4-2-1
+1 +3 +6
-3 -1-1 00+2+1 +1 +4 +5
C5 F5
Highest keyC1 F1 A1Lowest key
F
5C6 F
6
Engaging
Dual mode
Shifting
the octave
Adjusting
the balance
Voice 1
Voice 2
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Yamaha YDP-162/142 Omistajan opas

Kategoria
Digital pianos
Tyyppi
Omistajan opas
Tämä käsikirja sopii myös