Yamaha LSX-70 Ohjekirja

Lighting Audio Sys tem / Systeme Audio Lumineux

Printed in China ZN46800

OWNER’S MANUAL

MODE D ’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

Read the su ppl ied bo okle t “S afety Br och ure” be fo re us ing th e u nit.

Li sez le li vret fo urn i « Broch ure s u r l a s éc u ri té» ava nt d’u til ise r l ’un ité.

Lese n S ie die „Si che rhe its brosc hüre“, bevo r S ie das Ge rä t ve r we nde n.

Lä s d en med fö lja nde bros chyren ”S äker het sanv isn ing ar ” in nan du använ der receiver n.

Prim a d i u til izz are l ’un ità , l egg ere il “Vola nt ino su lla si curez za” for nito.

Lea el “Folle to de seg uri dad ” qu e s e p rop orcio na antes de ut ili zar la un ida d.

Lees he t m eeg eleverde boe kje “ Veili ghe ids broch ure” voordat u d it toe stel geb rui kt.

Пе ред ис пол ьз ован ием ап пар ата пр оч ти те пр ила га ем ую “бр ошю ру п о б езо пас нос ти”.

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

ИНС ТРУКЦ ИЯ ПО ЭКСПЛУАТАЦИИ

G

English Français Deutsch Svenska Italiano Español

Nederlands

Русский

2 En

Contents

Introduction

Supplied accessories............4

About this manual............4

Recharging this unit............4

Part names............5

Preparations

Installing “DTA CONTROLLER”............6

Turning on the lighting/power............6

Listening to music via Bluetooth connection

Pairing a device with the unit............7

Performing pairing and playing back music............8

Connecting a paired Bluetooth device and playing back music............9

Terminating the Bluetooth connection............9

Listening to external sources

Connecting an external device............10

Playing back............10

Using the SMART TIMER

Setting the SMART TIMER............11

Troubleshooting............12

Specifications............14

En 3

English

High quality sound

with ease of use

Plug and play convenience of your mobile

devices with enhanced sound.

............7, 10

Convenient remote operation by your

mobile device.

............6

A fusion of music and lighting

Start your day in the right light and on the right note.

Wake to your favorite song in a comfortable atmosphere.

............11

At the end of the day, immerse yourself in a healing

ambience of soft lighting and sound.

............6

Music anywhere you want ............4

4 En

Introduction

Confirm the package contents and thoroughly read this manual.

Supplied accessories

About this manual

• Operations

“iPhone” described in this manual may also refer to

“iPod touch” or “iPad.”

• Illustrations

Illustrations may differ from actual item depicted.

• Symbols

Indicates precautions for use of the unit and

feature limitations.

Indicates supplementary explanations for better

use.

&

Indicates the corresponding reference page(s).

AC adaptor

(DC 12 V/1.5 A

Model No.: MU18-D120150-C5)

Recharging this unit

When using this unit for the first time, connect the supplied AC adaptor to the unit and charge it from a wall outlet.

• If charging the unit with both the power and light turned off, the indicator blinks slowly in orange. Once charging is

complete, the indicator turns off.

• If the remaining battery level of this unit becomes low, the indicator will blink rapidly in orange.

• The charging time for the battery is approximately 4 hours when the unit is off and approximately 7 hours when the unit is

on.

• Check the remaining battery level of the unit from "DTA CONTROLLER" (& P.6).

• In the place where temperature is very high or low, the unit may be recharged earlier than usual or fail to be recharged.

• In order to maintain the function, the unit should be recharged every six months.

• The rechargeable battery has a limited lifespan. Its capacity decreases gradually with the frequency of use and the passage

of time.

• The lifespan of the rechargeable battery varies according to how it is stored, usage conditions and usage environment.

• In order to achieve the maximum duration from the battery, there may be a difference in sound volume and quality when

using the unit with the battery and when using the unit connected with the AC adaptor.

• The power may turn off depending on the volume and light status regardless of the remaining battery level.

AC adaptor

Indicator

En 5

English

Part names

Familiarize yourself with all parts and these functions.

* The light effects represent the sound expansion.

1 Light/speaker

2 Light

3 Speaker

4 / (VOLUME)

Controls the volume.

5 A (Power) (& P.6)

Press: Turns the unit on/off.

Press and hold: Disconnects a Bluetooth device.

The unit plays a startup tone when turned on and a

shutdown tone when turned off.

6 Indicator

Lights up when turning on the unit. Blinks when the

status of the Bluet ooth connection and the status of the

rechargeable battery change.

7 AUX (& P.10)

Connects to an external device via a commercially

available 3.5 mm stereo mini-plug cable.

8 DC IN (& P.4)

Connects the supplied AC adaptor.

9 Lighting +/– (& P.6)

Press to adjust the lighting brightness.

0 (Lighting) (& P.6)

Press to turn on or off the light.

6 En

Preparations

Install Yamaha’s application “DTA CONTROLLER” and turn the unit on.

Installing “DTA CONTROLLER”

Installing DTA CONTROLLER application on a mobile device, such as a smartphone or tablet

computer, allows you to use a variety of additional convenient features of Yamaha desktop

audio systems.

Features

• Turning on/off of the unit, adjusting volume

• Turning on/off the lighting, adjusting the brightness of the lighting

• Setting of the SMART TIMER (& P.11)

• Playing back songs stored in a smart phone or tablet

Turning on the lighting/power

1 Connect the AC adaptor to the unit and plug the power plug

into a wall outlet.

2 • Press to turn on the light.

- Lighting can be turned on/off even when the power of

the unit is off.

- To adjust the brightness, press the Lighting +/–

button (5 steps).

• Press A to turn on the unit.

- The unit plays a startup tone and turns on. You can then play music.

The mobile device needs to be connected with the unit via Bluetooth connection (& P.7).

http://itunes.com/app/

dtacontroller

(For users in the U.S.A.)

https://itunes.apple.com/us/

app/dta-controller-us/

id549333293?mt=8

Google Play™

https://play.google.com/

store/apps/

details?id=com.yamaha.av.

dtacontroller

* If access to any of these fails, search for “DTA

CONTROLLER” on the App Store or

Google Play.

Auto standby function

• The auto standby function will be activated as follows (default setting).

- The unit turns off automatically if no operation has been performed for more than

20 minutes with no device connected to AUX or via Bluetooth connection.

-

The unit turns off automatically if no operation has been performed for more than 8 hours.

Activating/deactivating the auto standby function

1 Press to turn on the light.

2 Press and hold for at least 10 seconds.

• The auto standby function switches and the lighting (& P.5) blinks.

- Auto standby is activated: The lighting blinks three times.

- Auto standby is deactivated: The lighting blinks once.

Turning the notification-tone function on/off

• If you want to turn the notification tones (startup tone/shutdown tone, Bluetooth

connection tone, maximum/minimum volume notification tone) on or off, when the

unit is off, press

A while pressing to turn on the unit.

- If turning on the notification tones: The unit plays the startup tone.

- If turning off the notification tones: The unit does not play the startup tone.

En 7

English

Listening to music via Bluetooth connection

You can listen to sound wirelessly from a Bluetooth compatible device.

Pairing a device with

the unit

When connecting a Bluetooth device to the unit for the

first time, the device is required to be registered to the

unit. This process is called “pairing.” Once pairing is

completed, subsequent connection can be made with a

couple of easy steps.

A Bluetooth device

connecting for the first

time

A Bluetooth device

already having been

connected

Perform pairing and play

back music (& P.8)

Establish Bluetooth

connection and play back

music (& P.9)

Bluetooth

device

• If pairing information for a device is deleted, you

will need to perform pairing of that device again in

order to connect it again.

Listening to music via Bluetooth connection

8 En

Performing pairing and playing back music

1 Press A to turn on the unit (& P.6).

• The indicator lights in orange.

2 Tap “Settings” and “Bluetooth” on your iPhone to turn on its

Bluetooth function.

3 On the connecting list in the “Device” field, tap “LSX-70 Yamaha.”

• After pairing is complete, the indicator (& P.5) blinks in blue and the unit plays a Bluetooth connection tone when a

Bluetoot h connection is established.

4 Play back music on your iPhone.

1 Press A to turn on the unit (& P.6).

• The indicator lights in orange.

2 Turn on the Bluetooth function on your device.

3 In the Bluetooth setting of the device, select “LSX-70 Yamaha.”

• After pairing is complete, the indicator (& P.5) blinks in blue and the unit plays a Bluetooth connection tone when a

Bluetoot h connection is established.

• If the device does not connect to the unit automatically after the pairing is completed, select “LSX-70 Yamaha” again

in the Blu etooth setting on your device.

• For details, see the owner’s manual of your device.

4 Play back music on your device.

iPhone

Other than iPhone

• If another device is already connected to the unit,

terminate that Bluetooth connection by pressing

and holding

A, then perform pairing with the

new device.

• The pairing operation may differ depending on

your iPhone or version of device OS.

• If another device is already connected to the unit,

terminate that Bluetooth connection by pressing

and holding

A, then perform pairing with the

new device.

• If a passkey is required during the pairing

operation, enter the number “0000.”

Listening to music via Bluetooth connection

En 9

English

Connecting a paired

Bluetooth device and

playing back music

If the unit is connected to another device via Bluetooth

connection, terminate that connection (see “Terminating

the Bluetooth connection” on the right) before

connecting to the target device.

1 Press A to turn on the unit.

2 Perform Bluetooth connection.

• Turn on the Bluetooth function on the device and

select “LSX-70 Yamaha.”

• The indicator blinks in blue and the unit plays a

Bluetoot h connection tone when a connection is

established.

• If the device is latest recently connected one via

Bluetoot h connection, this unit and the

connecting device are connected automatically

via Bluetooth connection when you turn on the

power of this unit.

3 Play back music on the connected

device.

1

Indicator

2, 3

• Decrease the volume of the unit before

playback. Otherwise, playback volume may be

too loud.

Terminating the Bluetooth connection

• Bluetooth connection can be terminated by either

one of the following.

- Turn off the Bluetooth function of the connected

device.

- Press and hold

A on the unit.

- Turn off both the power and light of the unit.

• The indicator blinks in blue and the unit plays a

Bluetooth disconnection tone when the

connection is terminated.

Music enhancer

This function enhances the sound of compressed

digital sound by regenerating musical elements

that are lost through compression via Bluetooth

connection.

10 En

Listening to external sources

This unit allows playback of external devices connected to the AUX terminal. A commercially available 3.5 mm stereo mini-plug cable is required for this

connection. Be sure to turn off the unit by pressing

A before connecting the external device.

Connecting an external

device

1 Plug the cable into the AUX terminal

of the unit.

2 Connect the other end of the cable to

the external device.

Playing back

1 Press A to turn on the unit.

2 Play back the external device.

• For details on playback, see the owner’s manual

supplied with the external device.

• Decrease the volume of the unit and the external device before connection.

• If both a Bluetooth device and external device are played back, sound from both devices will be heard.

3.5 mm stereo mini-plug cable

1

2

External

device

En 11

English

Using the SMART TIMER

The SMART TIMER allows you to turn on the lighting at the brightness you set and play back your favorite music as a wake-up timer every morning. You can also

turn off the lighting and stop music playback automatically while you are in bed listening to music.

SMART TIMER can be used only when the unit is connected to a power source.

What the SMART TIMER can do

Setting the SMART TIMER

SMART TIMER settings can be performed with a smart phone or tablet that has the DTA CONTROLLER application (& P.6)

installed.

1 Connect a device via Bluetooth connection (& P.8, 9).

2 Start DTA CONTROLLER on the device and make the SMART TIMER

settings.

3 Synchronize the SMART TIMER with the unit by DTA CONTROLLER.

• Be sure to synchronize the SMART TIMER with the unit every time you perform the SMART TIMER

setting.

On-timer Off-timer

• Turn on the lighting at a specified time.

• Specify the brightness of the lighting.

• Play back the music of a connected device at a specified time.

• Specify a song.

• Preset the volume level.

• Turn off the lighting at a specified time.

• Turn off the power at a specified time.

Due to product improvements, specifications and appearance are subject to change without notice.

• To play back a song via Bluetooth connection at a

set time, it is required that the Bluetooth function

of your smart phone or tablet is turned on.

Additionally, in the case of an iPhone, do not quit

DTA CONTROLLER while multitasking.

• If another Bluetooth device is connected to the

unit at the time you set, the song you set as the

on-timer will not be played back. Disconnect any

other device before the time you set.

• The on-timer and off-timer of the SMART TIMER

can be activated/deactivated by DTA

CONTROLLER only.

Inner clock of the unit

• The unit copies the time to the unit’s inner clock

from DTA CONTROLLER when a device connects

to the unit via Bluetooth connection. The SMART

TIMER follows the unit’s inner clock.

• If you disconnect the AC adaptor and the

remaining battery level completely runs out, the

clock setting will reset and SMART TIMER will turn

off.

12 En

Troubleshooting

Refer to the table below if the unit does not function properly. If your solution is not listed below or if the instruction below does not help, turn off the unit,

disconnect the AC adaptor, and contact your nearest authorized Yamaha dealer or service center.

General

Problem Cause Solution

The unit turns off soon after the power is

turned on.

The unit does not operate properly.

The AC adaptor is not properly connected. Connect the AC adaptor firmly.

The battery in this unit is weak. Recharge the battery (& P.4).

This unit has been exposed to a strong external electric shock such as

lightning or strong static electricity.

Hold down

A on the front panel for more than 10 seconds to initialize and

reboot the unit.

The speakers make no sound.

The volume is minimum. Turn up the volume.

The power is off. Turn on the unit and play the music again.

The auto standby function is activated. Turn on the unit (& P.6).

The unit and/or lighting turn off suddenly.

The auto standby function is activated. Turn on the unit and/or lighting (& P.6).

The off-timer of the SMART TIMER is set. Check the setting of the off-timer from DTA CONTROLLER.

The battery in this unit is weak. Recharge the battery (& P.4).

The unit and lighting turn on suddenly. The on-timer of the SMART TIMER is set. Check the setting of the on-timer from DTA CONTROLLER.

The indicator blinks rapidly in orange. The battery in this unit is weak. Recharge the battery (& P.4).

SMART TIMER does not operate. SMART TIMER is not set from DTA CONTROLLER.

Set the SMART TIMER from DTA CONTROLLER and synchronize it to the unit

(& P.11).

There is noise interference from digital or

high-frequency equipment.

This unit is too close to the digital or high-frequency equipment. Place this unit farther away from such equipment.

This unit does not work at all. The battery in this unit is weak. Recharge the battery (& P.4).

Troubleshooting

En 13

English

Bluetooth

Problem Cause Solution

Cannot make the unit pair with a

Bluetooth device.

The unit is turned off. Turn the unit on and perform the paring (& P.8).

Another Bluetooth device is connected.

Terminate current Bluetooth connection, and perform pairing with the new

device.

This unit and the device are too far apart. Pair the unit and device within a distance of 10 m (33 ft).

There is a device (microwave oven, wireless LAN, etc.) that outputs signals

in the 2.4 GHz frequency band nearby.

Move this unit away from the device that is emitting radio-frequency

signals.

A Bluetooth adaptor, etc., that you want to pair with this unit has a passkey

other than “0000.”

Use a Bluetooth adaptor, etc., whose passkey is “0000.”

The Bluetooth device does not support A2DP. Perform pairing with a device which supports A2DP.

Cannot make a Bluetooth connection.

The unit is turned off. Turn the unit on.

Another Bluetooth device is connected.

Terminate current Bluetooth connection, then establish a Bluetooth

connection with that device again.

The Bluetooth function of the device is turned off. Turn on the Bluetooth function of the device.

The pairing information has been deleted.

Perform pairing again (& P.8).

This unit can be paired with eight devices. If pairing with a ninth device is

performed, the pairing information with the earliest connection date will be

deleted.

This unit is not registered on the device’s Bluetooth connection list. Perform paring again (& P.8).

No sound is produced, or the sound is

interrupted during playback.

The volume of the connecting device is set too low. Turn up the volume of the connecting device.

The connecting device is not set to send Bluetooth audio signals to the unit.

Switch the output of Bluetoot h audio signals of the connecting device to

the unit.

The Bluetooth connection of the unit with the device has terminated. Perform Bluetooth connection operations again (& P.9).

There is a device (microwave oven, wireless LAN, etc.) that outputs signals

in the 2.4 GHz frequency band nearby.

Move this unit away from the device that is emitting radio-frequency

signals.

This unit and the connecting device are too far apart. Move the connecting device to within 10 m (33 ft) of the unit.

14 En

Specifications

As of August 2014. Specifications are subject to change without notice.

* The estimated lifetime of LED lighting is about 36,000 hours.

This figure is based on the shorter of either the duration until the lighting is worn out, or the

duration before luminous flux drops to below 70% of the original. Note, however, that the

estimated 36,000 hour duration is not guaranteed.

“Made for iPod,” “Made for iPhone,” and “Made for

iPad” mean that an electronic accessory has been

designed to connect specifically to iPod, iPhone, or

iPad, respectively, and has been certified by the

developer to meet Apple performance standards.

Apple is not responsible for the operation of this device or its compliance with safety and

regulatory standards.

Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless

performance.

iPad, iPhone, iPod and iPod touch are trademarks of Apple Inc., registered in the U.S. and other

countries.

Bluetooth

• Bluetooth is a technology for wireless communication between devices within an area of about

10 meters (33 ft) employing the 2.4 GHz frequency band, a band which can be used without a

license.

• Bluetooth is a registered trademark of the Bluetooth SIG and is used by Yamaha in accordance

with a license agreement.

Handling Blu e tooth communications

• The 2.4 GHz band used by Bluetooth compatible devices is a radio band shared by many types of

equipment. While Bluetooth compatible devices use a technology minimizing the influence of

other components using the same radio band, such influence may reduce the speed or distance

of communications and in some cases interrupt communications.

• The speed of signal transfer and the distance at which communication is possible differs

according to the distance between the communicating devices, the presence of obstacles, radio

wave conditions and the type of equipment.

• Yamaha does not guarantee all wireless connections between this unit and devices compatible

with Bluetooth function.

The aptX® mark and the aptX logo are trade marks of CSR plc or one of its group companies and

may be registered in one or more jurisdictions.

Android™

Android and Google Play are trademarks of Google, Inc.

Bluetooth section

Bluetooth version Ver. 2.1+EDR

Supported profile A2DP (Advanced Audio Distribution Profile)

Compatible codecs SBC, AAC, aptX®

Wireless output Bluetooth Class 2

Maximum communication range 10 m [33 ft] (without obstructions)

AUX section

Input connector 3.5 mm stereo mini jack

Lighting section (LED*)

Lifetime (Luminous flux under 70%) About 36,000 hours

Power consumption (When only the lighting is on) 8 W

Rechargeable battery

Built-in battery Lithium-ion battery

Capacity/Voltage 2900 mAh/3.6 V

Playable time

Under the fully recharged condition, about 8 hours (output:

200 mW)

Recharge time

Power-on condition: About 7 hours

Power-off condition: About 4 hours

General

Power supply AC 230 V, 50 Hz

Power consumption

Power-on condition (music is played back and the lighting is on):

10 W

Power-off condition (lighting and SMART TIMER are off and no

Bluetooth connection): 0.2 W

Standby condition (SMART TIMER is on): 0.5 W

AC adaptor MU18-D120150-C5 (DC 12 V/1.5 A)

Dimensions (W × H × D) 94 × 241 × 94 mm (3-3/4 × 9-1/2 × 3-3/4 in)

Weight 950 g (2.09 lbs.)

2 Fr

Table des matières

Introduction

Accessoires fournis............4

Quelques mots sur ce mode d’emploi............4

Recharge de cet appareil............4

Nom des pièces............5

Préparations

Installation de « DTA CONTROLLER »............6

Allumage de l’éclairage/Mise sous tension............6

Écoute de musique avec la connexion Bluetooth

Appariement d’un périphérique avec l’appareil............7

Appariement et lecture de musique............8

Connexion d’un périphérique Bluetooth apparié et lecture de musique............9

Désactivation de la connexion Bluetooth............9

Écoute de sources externes

Raccordement d’un périphérique externe............10

Lecture............10

Utilisation du SMART TIMER

Réglage du SMART TIMER............11

Guide de dépannage............12

Caractéristiques techniques............14

Fr 3

Français

Son de qualité élevée

et simplicité d’utilisation

Aspect pratique de Plug and Play sur vos

périphériques mobiles avec un son

amélioré. ............7, 10

Utilisation commode à distance de

votre périphérique mobile. ............6

Fusion de la musique et de l’éclairage

Commencez votre journée sous le bon éclairage et sur

une bonne note.

Réveillez-vous au son de votre morceau préféré, dans

une ambiance conviviale. ............11

À la fin de la journée, plongez dans une ambiance

reposante de lumière tamisée et de sons

calfeutrés. ............6

De la musique partout où vous le

souhaitez ............4

4 Fr

Introduction

Vérifiez le contenu de l’emballage et lisez entièrement ce manuel.

Accessoires fournis

Quelques mots sur ce

mode d’emploi

• Opérations

L’« iPhone » décrit dans ce manuel peut également faire

référence à un « iPod touch» ou à un « iPad ».

• Illustrations

Les illustrations peuvent varier du véritable article

représenté.

• Symboles

Signale les précautions à prendre concernant

l’utilisation de l’appareil et les limites de ses

fonctions.

Donne des explications supplémentaires

permettant une meilleure utilisation.

&

Indique la ou les pages de référence

correspondantes.

Adaptateur secteur

(12V CC/1,5A

N° de modèle : MU18-D120150-C5)

Recharge de cet appareil

Lors de la première utilisation de cet appareil, raccordez l’adaptateur secteur fourni à l’appareil et chargez-le à partir d’une prise murale.

• Si la charge de l’appareil s’effectue alors que l’alimentation et la lampe sont éteintes, le voyant clignote lentement en

orange. Une fois la charge terminée, le voyant s’éteint.

• Si le niveau de la batterie de cet appareil s’affaiblit, le voyant clignote rapidement en orange.

• La durée de charge de la batterie est d’environ 4 heures lorsque l’appareil est hors tension et d’environ 7 heures lorsque

l’appareil est sous tension.

• Vérifiez le niveau restant de la batterie de l’appareil sur le « DTA CONTROLLER » (& P.6).

• Dans des environnements à températures très élevées ou basses, l’appareil peut se recharger plus rapidement que

d’habitude ou ne pas se recharger.

• Pour maintenir l’appareil en état de fonctionnement, il faut le recharger tous les six mois.

•

La batterie rechargeable a une durée de vie limitée. Sa capacité diminue progressivement avec le temps et la fréquence d’utilisation.

• La durée de vie de la batterie rechargeable dépend de la façon dont elle est stockée et des conditions et de

l’environnement d’utilisation.

• Afin de parvenir à la durée maximale de la batterie, il peut y avoir une différence de volume sonore et de qualité lors de

l’utilisation de l’appareil avec la batterie et lors de l’utilisation de l’appareil relié à l’adaptateur secteur.

• Selon le volume et l’état de la lampe, l’alimentation peut se couper indépendamment du niveau de batterie restant.

Adaptateur secteur

Voyant

Fr 5

Français

Nom des pièces

Familiarisez-vous avec toutes les pièces et les fonctions suivantes.

* Les effets lumineux représentent l’expansion du son.

1 Lampe/Haut-parleur

2 Lampe

3 Haut-parleur

4 / (VOLUME)

Pour régler le volume.

5 A (Alimentation) (& P.6)

Si vous appuyez sur cette touche : met l’appareil

sous/hors tension.

Si vous maintenez cette touche enfoncée :

déconnecte un périphérique Bluetooth.

L’appareil lit une tonalité de démarrage lors de sa mise

sous tension et une tonalité d’arrêt lors de sa mise hors

tension.

6 Voyant

S’allume lorsque vous mettez l’appareil sous tension.

Clignote lorsque l’état de la connexion Bluetoot h et l’état

de la batterie rechargeable changent.

7 AUX (& P.10)

Se connecte à un périphérique externe via un câble mini-

jack stéréo de 3,5 mm disponible dans le commerce.

8 DC IN (& P.4)

Se connecte à l’adaptateur secteur fourni.

9 Éclairage +/– (& P.6)

Appuyez sur cette touche pour régler la luminosité de

l’éclairage.

0 (Éclairage) (& P.6)

Appuyez sur cette touche pour allumer ou éteindre la

lampe.

6 Fr

Préparations

Installez l’application « DTA CONTROLLER » de Yamaha et mettez l’appareil sous tension.

Installation de « DTA CONTROLLER »

L’installation de l’application DTA CONTROLLER sur un périphérique mobile, comme un

smartphone ou une tablette, vous permet d’utiliser différentes caractéristiques pratiques

supplémentaires des systèmes audio de bureau Yamaha.

Fonctions

• Mise sous/hors tension de l’appareil, réglage du volume

• Mise sous/hors tension de l’éclairage, réglage de la luminosité de

l’éclairage

• Réglage de la fonction SMART TIMER (& P.11)

• Lecture des morceaux stockés sur un smartphone ou une tablette

Allumage de l’éclairage/Mise sous tension

1 Raccordez l’adaptateur secteur à l’appareil, puis branchez la

fiche d’alimentation sur une prise murale.

2 • Appuyez sur pour allumer la lampe.

- Il est possible d’allumer/éteindre l’éclairage même

lorsque l’appareil est hors tension.

- Pour régler la luminosité, appuyez sur la touche

Éclairage +/– (5 étapes).

• Appuyez sur A pour mettre l’appareil sous

tension.

- L’appareil lit une tonalité de démarrage et se met sous tension. Vous pouvez alors

lire de la musique.

Le périphérique mobile doit être connecté à l’appareil via Bluetooth (& P.7).

http://itunes.com/app/

dtacontroller

(Pour les utilisateurs aux

États-Unis)

https://itunes.apple.com/us/

app/dta-controller-us/

id549333293?mt=8

Google Play™

https://play.google.com/

store/apps/

details?id=com.yamaha.av.

dtacontroller

* En cas d’échec de l’un de ces accès,

recherchez « DTA CONTROLLER » sur l’App

Store ou sur Google Play.

Fonction de veille automatique

• La fonction de veille automatique sera activée comme suit (réglage par défaut).

- L’appareil se met automatiquement hors tension si aucune opération n’a été

effectuée depuis plus de 20 minutes et qu’aucun périphérique n’est branché à la

borne AUX ou via la connexion Bluetooth.

-

L’appareil se met automatiquement hors tension si aucune opération n’a été effectuée

depuis plus de 8 heures.

Activation/Désactivation de la fonction de veille automatique

1 Appuyez sur pour allumer la lampe.

2 Maintenez la touche enfoncée pendant au moins 10 secondes.

• La fonction de veille automatique commute et l’éclairage (& P.5) clignote.

- La veille automatique est activée : l’éclairage clignote trois fois.

- La veille automatique est désactivée : l’éclairage clignote une fois.

Activation/Désactivation de la fonction de tonalité de notification

• Si vous souhaitez activer ou désactiver les tonalités de notification (tonalité de

démarrage/tonalité d’arrêt, tonalité de connexion Bluetooth, tonalité de notification

de volume maximal/minimal), lorsque l’appareil est hors tension, appuyez sur

A tout

en appuyant sur pour mettre l’appareil sous tension.

-

Si vous activez les tonalités de notification :

l’appareil lit la tonalité de démarrage.

- Si vous désactivez les tonalités de notification : l’appareil ne lit pas la tonalité de

démarrage.

Fr 7

Français

Écoute de musique avec la connexion Bluetooth

Vous pouvez écouter du son sans fil à partir d’un périphérique compatible Bluetooth.

Appariement d’un

périphérique avec

l’appareil

Lorsque vous connectez un périphérique Bluetooth à

l’appareil pour la première fois, ce périphérique doit être

enregistré sur l’appareil. Ce processus est appelé

« appariement ». Une fois l’appariement terminé, il est

possible d’effectuer une connexion ultérieure en suivant

quelques étapes simples.

Un périphérique

Bluetooth qui se connecte

pour la première fois

Un périphérique

Bluetooth qui s’est déjà

connecté

Procédez à l’appariement

et lisez de la musique

(& P.8)

Établissez une connexion

Bluetooth et lisez de la

musique (& P.9)

Périphérique

Bluetooth

• Si les informations d’appariement d’un

périphérique sont supprimées, vous devrez

recommencer l’appariement de ce périphérique

pour pouvoir le reconnecter.

Sivu latautuu ...

Yamaha LSX-70 Ohjekirja

Yamaha LSX-70 Ohjekirja

muilla kielillä

Liittyvät paperit

Muut asiakirjat