Silvercrest STMS 228 A1 Ohjekirja

STMS 22.8 A1

Wireless Keyboard

Includes wireless mouse and USB nano receiver

Wireless Keyboard

Includes wireless mouse

and USB nano receiver

User manual and service

information

GB

IE

Radiostyret tastatur

Med radiostyret mus

USB-nano-modtager

Brugervejledning og

serviceinformation

DK

FI

Langaton näppäimistö

Langaton hiiri ja

USB-nano-vastaanotin

Käyttöopas ja huolto-ohjeet

SE

Trådlöst tangentbord

Med trådlös mus och

USB-Nanomottagare

Bruksanvisning och

serviceinformation

English - 1

English………………………………………………………………………. 2

Suomi…………………………………………………………………………. 22

Svenska………………………………………………………………………. 42

Dansk…………………………………………………………………………. 62

Wireless keyboard with wireless mouse STMS 22.8 A1

2 - English

Wireless keyboard with wireless mouse and USB nano

receiver

STMS 22.8 A1

Package Contents

A Wireless Keyboard STMS 22.8 A1-K

B Wireless Mouse STMS 22.8 A1-M

C USB nano receiver STMS 22.8 A1-R

(inserted into the wireless mouse)

D 2 AAA-type batteries, 1.5V (Micro) for wireless

keyboard (not illustrated)

E 1 AA-type battery, 1.5V (Mignon) for wireless

mouse (not illustrated)

F CD-ROM with software (not shown)

G User's manual (not shown)

English - 3

System Requirements

- Intel

®

Pentium

®

III / AMD AthlonTM or higher

- 1 free USB 2.0 port

- Microsoft

®

Windows

®

XP, Windows Vista

®

or Windows

®

7

- CD-ROM or DVD-ROM Drive for installing the software

Overview

1 Special keys (hotkeys)

2 USB nano receiver (inserted into the wireless mouse)

3 Battery level indicator*

4 Volume control

* The LED on the keyboard front panel will light-up briefly when inserting

the batteries.

Wireless keyboard with wireless mouse STMS 22.8 A1

4 - English

5 800/1600 cpi toggle switch (press briefly)

Standard / media mode toggle switch

(keep pressed for 3 seconds)

6 Tilt wheel (4-way scroll wheel)

Volume control and mute (media mode)

7 Right mouse button

8 Left mouse button

9 Battery level indicator

10 Forward (default)

Next title (media mode)

11 Back (default)

Previous title (media mode)

12 Zoom + (default mode)

Launch Media Player (media mode)

13 Zoom - (default mode)

Play / Pause (media mode)

English - 5

Table of Contents

Package Contents .......................................................................................... 2

System Requirements .................................................................................... 3

Overview ......................................................................................................... 3

Important Safety Instructions .......................................................................... 6

Children and Persons with Disabilities ........................................................ 6

Batteries ....................................................................................................... 7

RF Interface ................................................................................................. 7

Operating Environment ................................................................................ 7

Intended Use ................................................................................................ 8

Repair and Maintenance .............................................................................. 8

Copyright ...................................................................................................... 9

Storing When Not Using the Product ........................................................... 9

Conformity Notice ...................................................................................... 10

Disposal of Old Devices ............................................................................. 10

Introduction ................................................................................................... 10

Installing the Hardware ................................................................................. 11

Inserting the Batteries ................................................................................ 11

Connecting the USB Nano Receiver ......................................................... 12

Installing the Software .................................................................................. 13

Icons in the Task Bar ................................................................................. 14

Configuring ................................................................................................... 15

Changing the Operating Mode ................................................................... 15

Configuring the Wireless Optical Mouse ................................................... 16

Configuring the Wireless Keyboard ........................................................... 16

Appendix ....................................................................................................... 19

Troubleshooting ......................................................................................... 19

Technical Specifications ............................................................................ 20

Warranty Information .................................................................................... 21

Wireless keyboard with wireless mouse STMS 22.8 A1

6 - English

Important Safety Instructions

Before you use this device for the first time, please read the following notes

in this manual and heed all warnings, even if you are familiar with handling

electronic devices. Keep this manual safe for future reference. If you sell the

device or pass it on, it is essential that you also hand over this manual.

This icon denotes important information for safe operation of

the product and for the user’s safety.

This icon alerts about a strong light source.

This icon denotes further information on the topic.

Avoid damage to your eyes!

Never look into the LED beam.

Children and Persons with Disabilities

Electrical devices do not belong in the hands of children. People with

disabilities should only use electrical devices in appropriate circumstances.

Do not allow children or persons with disabilities to use electrical devices

when not under supervision. These may not comprehend the presence of

potential risks. Batteries and small parts represent potential choking

hazards. Keep the batteries in a safe place. If a battery is swallowed, seek

medical help immediately. Keep the packaging away from children and

persons with disabilities too as there is danger of suffocation.

English - 7

Batteries

Insert the batteries with the correct polarity. Never try to recharge the

batteries and under no circumstances throw them into fire. Do not mix

battery types (old and new or carbon and alkaline, etc.). Remove the

batteries when the device is not to be used for a long time. Improper use

may cause explosions and danger to life.

RF Interface

Turn the device off when onboard an aircraft, in a hospital, in an operating

theatre or in the vicinity of medical electronic equipment. The RF signals

may interfere with the functionality of sensitive devices. Keep the device at

least 20cm (8 inches) away from pacemakers, as the RF signals may

interfere with the functionality of the pacemaker. The transmitted RF signals

can cause interference with hearing aids. Do not place the device with the

wireless adapter turned on near flammable gases or in a potentially

explosive area (e.g. a paint shop), as the transmitted RF signals may cause

explosions or fire. The range of the radio wave signals depends on

environmental conditions. When data is transmitted via a wireless

connection it may also be received by unauthorized parties. Targa GmbH is

not liable for any interference caused to RF or TV signals through

unauthorized modification to this device. Furthermore, Targa does not

assume any liability for replacing any cables or devices that have not been

specifically approved by Targa GmbH. The user is solely responsible and

liable for troubleshooting any interference caused by unauthorized

modification of this device and for replacing appliances.

Operating Environment

Position the device on a stable, flat surface and do not place any objects on

the device. The device is not designed for use in environments with high

temperatures or humidity (e.g. bathrooms), and must be kept free of dust.

Operating temperature and operating humidity: 5 °C to 40 °C, max. 90% RH.

Wireless keyboard with wireless mouse STMS 22.8 A1

8 - English

Always make sure that:

- no direct heat sources (e.g. radiators) can affect the device;

- the device is not exposed to direct sunlight or artificial light;

- contact with spray, dripping water and corrosive liquids is avoided

and the device is never operated near water; in particular the device

may never be immersed in liquids (do not place any objects

containing liquids, such as vases or drinks, near the device);

- the device is never placed in the immediate vicinity of magnetic

fields (e.g. loudspeakers);

- no fire hazards (e.g. burning candles) are placed on or near the

device;

- no foreign bodies are introduced into the device;

- the device is not subject to extreme temperature changes.

- the device is not subject to excessive shocks and vibrations;

Intended Use

This Keyboard and Mouse Set, consisting of a wireless keyboard, wireless

mouse and wireless receiver, is an IT device. The device may not be used

outdoors or in tropical climates. This product has not been designed for

corporate or commercial applications. Use the product in domestic

environments for private applications only. Any use other than that

mentioned above does not correspond to the intended use. This device

fulfils all that relates to CE Conformity, relevant norms and standards. Any

modifications to the device other than recommended changes by the

manufacturer may result in these standards no longer being met. The

manufacturer is not liable for any damage or interference caused by

unauthorized modifications. Only use the accessories recommended by the

manufacturer.

If you are not using the device within the Republic of Germany, you must

observe the regulations and laws in the country of use.

Repair and Maintenance

Repairs are required when this device has been damaged in any way, for

example when liquid has entered the product, when the product has been

exposed to rain or moisture, when the product does not work normally or if

the product has been dropped. If smoke, unusual noises or smells are

noticed, switch off the device immediately. In these cases the device should

no longer be used and should be inspected by authorized service personnel.

Please contact qualified personnel when repair is needed. Never open the

English - 9

housing of the device, or the accessories. Only use a clean, dry cloth for

cleaning. Never use any corrosive liquids.

Copyright

The entire content of this User’s Manual is copyrighted and is provided to the

reader for information purposes only. Copying data and information without

prior written and explicit authorization from the author is strictly forbidden.

This also applies to any commercial use of the contents and information. All

texts and figures are up-to-date as per the date of print release. We assume

no liability for any changes.

Storing When Not Using the Product

When leaving unused for a long period of time, remove the batteries from the

wireless keyboard and from the wireless mouse. Remove the USB nano

receiver from your computer’s USB port and insert it into the storage

compartment of the mouse. Please note that the USB nano receiver fits into

the storage compartment in only one direction, without the need to apply any

force. Also make sure that the storage temperature is maintained between

5°C and 40°C. Humidity must not exceed 90% RH.

Wireless keyboard with wireless mouse STMS 22.8 A1

10 - English

Conformity Notice

The mouse and keyboard set complies with the basic and other

relevant requirements of the R&TTE Directive 1999/5/EC. The

corresponding Declaration of Conformity can be found at the

end of this User's Manual.

Disposal of Old Devices

Devices marked with this symbol are subject to European

Directive 2002/96/EC. All electric and electronic devices must be

disposed of separately from household waste at official disposal

centres. Also the USB nano receiver is an electronics device

and needs to be disposed of properly. Avoid hazards to the

environment and dangers to your personal health by disposing

of the device properly. For further information about proper

disposal, contact your local government, disposal bodies or the

shop where you bought the device.

Respect the environment. Old batteries do not belong in the domestic waste.

They must be handed in to a collection point for waste batteries.

Recycle the packaging material properly too. Cardboard packaging can be

taken to paper recycling containers or public collection points for recycling.

Any film or plastic contained in the packaging should be taken to your public

collection points for disposal.

Introduction

Thank you for purchasing this wireless keyboard with wireless mouse STMS

22.8 A1. The devices feature a SmartLink technology that makes any

manual synchronisation obsolete. The multiple function buttons of the

devices let you customise the mouse and keyboard according to your needs.

The mouse features a tilt wheel (4-way scroll wheel) to allow horizontal

scrolling besides the usual vertical scrolling.

English - 11

Installing the Hardware

Unpack all the devices and use the package contents checklist on page 2 to

verify that you have received all items listed.

Inserting the Batteries

First insert the batteries into the wireless mouse and wireless keyboard, as

shown in the figures below. Take care to insert the batteries into the device

observing the correct polarity (+ and –) then press the On/Off button (15) to

power the wireless mouse on. The wireless mouse features a battery level

indicator (9) on its top panel. If it

blinks orange, the battery is empty.

Fig.: Detailed view of bottom of the keyboard

Fig.: Detailed view of bottom of the mouse

14 Keyboard battery compartment

15 On/off button of the mouse

16 Optical sensor

17 Mouse battery compartment

18 USB nano receiver

Wireless keyboard with wireless mouse STMS 22.8 A1

12 - English

The wireless mouse features an automatic standby function.

When not using the wireless mouse for a certain amount of time,

it will power off. Move the wireless mouse or press any mouse

button to power it back on (the drivers must be installed).

The devices feature a battery level indicator (3 and 9).

Whenever it blinks, the batteries of the respective device are

exhausted. When this happens, replace the batteries with new

batteries of the same type.

Connecting the USB Nano Receiver

If you still have your old keyboard and mouse connected to the computer,

please shut down your computer, disconnect the corresponding devices from

the PC and restart the computer.

Plug the USB nano receiver (inserted into the wireless mouse) into a free

USB port on your powered-on computer.

Fig.: USB nano receiver

The operating system will detect the new hardware and will automatically

install the corresponding drivers. Depending on the operating system, one of

the following messages will appear:

Under Windows Vista

®

, Windows

®

7

When connecting the receiver for the first time, the operating system will

prompt "Installing device driver software". Wait until the message "Your

devices are ready to use" appears. Your mouse and keyboard have been

successfully configured and can now be used.

Under Windows

®

XP

When connecting the receiver for the first time, the operating system will

prompt "Found New Hardware". Wait until the message "Your new

hardware is installed and ready to use" appears before using the mouse

and keyboard.

If the connection to the nano receiver is interrupted or if it is not

possible to establish a connection, remove the batteries from the

mouse and keyboard and re-insert them.

English - 13

Installing the Software

In order to be able to use the full function-capabilities of your wireless

keyboard and wireless mouse, you must install the supplied software. To do

this, insert the supplied CD-ROM into the CD-ROM drive of your computer.

The setup process should start automatically, otherwise double-click on the

"SilverCrest STMS 22.8 A1 Driver Setup V1.0.exe" file on the CD-ROM to

start manually.

Under Windows Vista

®

and Windows

®

7 only the setup will be temporarily

blocked and a message "Do you want to allow the following program from an

unknown publisher to make changes to this computer?" appears. To

continue setup, click "Yes".

The following setup screens correspond to the Windows

®

7 operating

system. For Windows

®

XP / Windows Vista

®

these screens will slightly vary

but their content is the same.

To launch setup, click "Next".

Here you can select the destination

folder for the installation with the

"Change" button or use the

suggested folder. To proceed click

"Next".

Wireless keyboard with wireless mouse STMS 22.8 A1

14 - English

Click "Finish" to finish the setup

programme.

If you are prompted to restart your computer, restart it before

using the software.

Icons in the Task Bar

Double-clicking on this icon opens the configuration menu for the

optical mouse (See page 16 - Configuring the Wireless Optical

Mouse for details).

Double-clicking on this icon opens the configuration menu for the

keyboard (See page 16 - Configuring the Wireless Keyboard for

details).

This icon indicates that the function "Num Lock" is enabled.

Clicking again on the "Num Lock" button will disable this function

again.

This icon indicates that the function "Caps Lock" is enabled.

Clicking again on the "Caps Lock" button will disable this function

again.

This icon indicates that the function "Scroll Lock" is enabled.

Clicking again on the "Scroll Lock" button will disable this function

again.

English - 15

Right-click on the corresponding icon to open a menu showing

the following options:

Open Opens the configuration menu of the corresponding

device.

Info Shows information about the version of the installed

driver.

Exit Exits the function. If necessary, you can open the

applications again from the Start menu of your

operating system.

The operating systems default settings will hide disabled icons

in the task bar. It is recommended that you disable the "Hide

inactive icons" option in task bar properties.

Configuring

Changing the Operating Mode

Use the CPI button (5) to quickly toggle between 800 cpi and 1600 cpi

resolution for optical tracking. Tracking at 1600 cpi offers a higher accuracy.

To toggle between standard and media operating mode of your optical

mouse, press and hold the CPI button (5) for at least 3 seconds until the

charge indicator (9) blinks briefly. The available functions for media mode

can be found on page 4 – Overview. In media operating mode you can press

the tilt wheel (6) to the left or right to adjust the sound volume. In standard

operating mode you can press the tilt wheel (6) to the left or right or turn the

wheel to adjust the Windows sound volume, whenever the volume icon is

enabled in the system bar.

Wireless keyboard with wireless mouse STMS 22.8 A1

16 - English

Configuring the Wireless Optical Mouse

Double-click on the icon in the task bar (lower-right corner on your

screen, near the system clock) or right-click on the

icon and select

"Open" from the context menu. The mouse configuration menu will appear.

Here you can assign a function for

the highlighted mouse buttons.

Click on the radio button

corresponding to the mouse

button and select the desired

function from the menu.

By using "Restore to default" you

can return all settings to factory

default.

All selected options apply to the default mode. The button

assignments for media mode cannot be modified.

Enable changes by clicking the "Apply" button (the window remains open) or

by clicking on the "OK" button (the window closes).

Click the “About Mouse Driver” tab to display information about the mouse

driver. As all other tabs are provided by your operating system, please read

the corresponding OS documentation or online help for more information

Configuring the Wireless Keyboard

The wireless keyboard features 22 hotkeys (quick access keys) plus a

volume adjustment button. Once the software has been installed, the

function keys have the following default assignments. Additionally, there are

19 programmable functions keys.

English - 17

Hotkey Description

Default Internet Browser (e.g. Internet Explorer)

Default E-mail programme (e.g. Microsoft

®

Outlook)

Internet Browser favourites

Next (e.g. Internet Explorer)

Previous (e.g. Internet Explorer)

Refresh page

Search for ...

Launch the Calculator

Opens My Computer

Computer On/Off *

Many computer mainboards have a BIOS setting such as

"Boot on USB", "Power on by USB", or similar. Enable this

function to be able to power the computer on or off via the

keyboard. Please also read the documentation for your

computer or motherboard in order to adjust the BIOS setup.

Switch to Hibernation or Standby mode *

Resume from Hibernation mode *

Launch the default media player

(e.g. Microsoft

®

Media Player)

Playback/Pause

Stops playback

Previous title

Next title

Mute on/off

Launches Microsoft

®

Word (must have been installed)

Launches Microsoft

®

Excel (must have been installed)

Launches Microsoft

®

PowerPoint (must have been installed)

Launches the default calendar (e.g. Microsoft

®

Outlook,

must have been installed)

*not programmable

Wireless keyboard with wireless mouse STMS 22.8 A1

18 - English

In order to program the programmable function keys, double-click on the

icon in the task bar (lower-right corner of your screen, near the system clock)

or right-click on the

icon and select "Open" from the context menu.

The following menu will appear:

Here you can assign a function for

the highlighted keyboard keys.

Click on the radio button

corresponding to the special

function key and select the

desired function from the menu.

The following option "Select a program to run" ([ … ] button) lets you select

any executable file on the hard disk of your computer which will be run by

pressing the corresponding function button.

To do this, click the [ … ] button next to the desired function button. The

program browse dialog box will open. Browse for the desired executable file

and confirm the settings. This procedure depends on the operating system.

Enable changes by clicking the "Apply" button (the window remains open) or

by clicking on the "OK" button (the window closes).

By using the "Restore All To Default" you can return all modified functions to

factory default.

Click the "About Keyboard Driver" tab to display information about the

keyboard driver. As all other tabs are provided by your operating system,

please read the corresponding OS documentation or online help for more

information.

English - 19

Appendix

Troubleshooting

If after installation the wireless keyboard and the wireless mouse do not

respond, please test the following:

 Check the polarity of the batteries.

 Check that the receiver unit has been connected properly to your

computer (see page 12 - Connecting the USB Nano Receiver).

 Try a different USB port.

 Please note that when using multiple sets the different components

such as the wireless mouse, wireless keyboard and USB nano

receiver cannot be swapped.

 Check the charging level of the batteries (if necessary, insert new

batteries).

 Please note that you should use a pad (e.g. mouse pad) when using

the mouse on a glass or glossy surface.

If the icons for "Num Lock", "Caps Lock" and/or "Scroll Lock" do not appear

in the task bar, please try the following:

 Check the taskbar settings to see if inactive icons are hidden. Disable

this function to show all icons at all times.

Sivu latautuu ...

Silvercrest STMS 228 A1 Ohjekirja

Tämä käsikirja sopii myös

Silvercrest STMS 228 A1 Ohjekirja

muilla kielillä

Liittyvät paperit

Muut asiakirjat