Silvercrest SBTF 10 C2 Operating Instructions Manual

IAN 91621

BLUETOOTH

®

HANDS-FREE KIT SBTF 10 C2

BLUETOOTH

®

- FREI-

SPRECHEINRICHTUNG

Bedienungsanleitung

BLUETOOTH

®

HANDS-FREE KIT

Operating instructions

BLUETOOTH

®

-

MATKAPUHELINTELINE

Käyttöohje

BLUETOOTH

®

-

HÅNDFRIT SÆT TIL

MOBILTELEFONEN

Betjeningsvejledning

BLUETOOTH

®

-

HANDSFREE

Bruksanvisning

GB / IE Operating instructions Page 1

FI Käyttöohje Sivu 17

SE Bruksanvisning Sidan 33

DK Betjeningsvejledning Side 49

DE / AT / CH Bedienungsanleitung Seite 65

Before reading, unfold the page containing the illustrations and

familiarise yourself with all functions of the device.

Käännä ennen lukemista kuvallinen sivu esiin ja tutustu seuraavaksi

laitteen kaikkiin toimintoihin.

Vik ut bildsidan och ha den till hands när du läser igenom

anvisningarna och gör dig bekant med apparatens / maskinens

funktioner.

Før du læser, vend siden med billeder frem og bliv bekendt med

alle apparatets funktioner.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus

und machen Sie sich anschließend mit allen Funktionen des

Gerätes vertraut.

1

SBTF 10 C2

GB

IE

Content

Correct Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Package contents (see fold-out page) . . . . . . . . . . . . . . . 5

Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Controls (see fold-out page) . . . . . . . . . . . . . . . . . . . . . . 6

Installing the hands-free appliance in a vehicle . . . . . . . 6

Switching the hands-free appliance on and oﬀ . . . . . . . 7

Coupling the hands-free appliance with a mobile

telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Coupling the hands-free appliance with several

mobile telephones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Separating the connection . . . . . . . . . . . . . . . . . . . . . . . 9

Re-establishing the connection . . . . . . . . . . . . . . . . . . . . 9

Using the hands-free appliance . . . . . . . . . . . . . . . . . . . 9

Charging 5 V Devices . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Warranty & Service . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Importer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Declaration of EU Conformity . . . . . . . . . . . . . . . . . . . . 15

IB_91621_SBTF10C2_LB3.indb 1IB_91621_SBTF10C2_LB3.indb 1 20.08.13 12:2220.08.13 12:22

GB

IE

2

SBTF 10 C2

Congratulations on the purchase of your new appliance.

You have clearly decided in favour of a quality product.

These operating instructions are a part of this product.

They contain important information in regard to safety, use

and disposal. Before using the product, familiarise your-

self with all of these operating and safety instructions. Use

the product only as described and only for the speciﬁ ed

areas of application. In addition, pass these documents

on, together with the product, to any future owner.

Correct Usage

The Bluetooth

®

Hands-Free Kit SBTF 10 C2 is designed

for use in vehicles with a voltage of 12-24 V. The device is

designed to create an open voice connection with a mobile

phone via a Bluetooth® connection, in order to allow

the user to make telephone calls while travelling by car,

without having to hold the mobile phone to his or her ear.

The handsfree phone system uses both Bluetooth

®

radio

technology aswell as a digital signal processor (DSP) to

carry out telephone functions. In addition, mobile devices

with an operating voltage of 5V

(MP3 players, cell

phones, etc.) can be charged via the USB port.

This device may be used ONLY for private domestic pur-

poses, not for industrial or commercial applications. This

product is not intended for use in activities concerned with

medicinal, lifesaving or life sustaining applications. All of

the additional connecting cables and external devices used

MUST match the safety-related, electromagnetic compata-

bility and shielding quality standards of the device at hand.

This appliance is not intended for any other use or for uses

beyond those mentioned. Claims of any kind for damage

resulting from unintended use will not be excepted. The

operator alone bears liability.

IB_91621_SBTF10C2_LB3.indb 2IB_91621_SBTF10C2_LB3.indb 2 20.08.13 12:2220.08.13 12:22

3

SBTF 10 C2

GB

IE

Safety instructions

Symbol deﬁ nitions:

This symbol points out the particular risks associated

with handling, operation or manipulation.

This symbol stands for special tips and operating

instructions.

T r a ﬃ c safety has priority!

● Comply with all local laws. When driving, your hands

must ALWAYS be free to operate the vehicle safely.

Traﬃ c safety must ALWAYS take priority whilst driving.

● Only manipulate the hands-free appliance on those

occasions in which the traﬃ c situation permits it and in

which you will not endanger, injure, obstruct or cause

annoyance to other road users.

● Do not permit your concentration on the road traﬃ c to

be compromised by the manipulation and displays of

the handsfree appliance!

● Become familiar with the operation of it before driving

oﬀ and practice the safe operation of the facility!

● Install the hands-free appliance in the vehicle such that

your view is not obstructed and that the appliance is

not located in an impact zone in the passenger com-

partment or in the inﬂ ation area of airbags.

General safety instructions

● Do not attempt to open or repair the appliance. Should

you do so, appliance safety can no longer be assured

and the warranty becomes void.

● Have the defective device repaired by customer ser-

vice or an authorised specialist only. No liability will

be accepted for damage caused by misuse, improper

handling, use of force or unauthorized modiﬁ cation.

● Never subject the device to moisture, extreme tempera-

tures (greater than +70°C) or extreme vibrations.

IB_91621_SBTF10C2_LB3.indb 3IB_91621_SBTF10C2_LB3.indb 3 20.08.13 12:2220.08.13 12:22

GB

IE

4

SBTF 10 C2

● This device is not intended for use by persons (including

children) with restricted physical, sensory or mental abili-

ties or lack of experience and/or knowledge unless, of

course, they are supervised by a person responsible for

their safety or obtain from that person instructions on

how the device should be used.

Risk of suﬀ ocation

● The packaging material is not a toy. Keep plastic

sheeting, bags and all other packaging material away

from children. There is a risk of suﬀ ocation.

Connection to other mobile telephones

● If you wish to connect the appliance to another appli-

ance, read the operating instructions to obtain detailed

safety instructions. Do not connect it to a product that

is not compatible.

High frequency signals in vehicles

HF signals can, under circumstances, negatively inﬂ uence the

function of not properly installed or not suﬃ ciently shielded

electronic systems in vehicles, e.g. electronic ABS, electronic

tempo controllers and airbag systems. For further informa

tion about your vehicle or its possible ancillaries make

contact with the respective manufacturer or their repre-

sentative.

Introduction

Bluetooth

®

is a wireless communication system with a

short range. It makes possible wireless connections be-

tween Bluetooth

®

appliances, such as for example mobile

telephones, PDA and PCs. Bluetooth

®

relates itself to a

worldwide standard for operation in the internationally

recognised ISM Frequency Range (Industrial, Scientiﬁ c

and Medical). Within the ISM Frequency Range (2.402 -

2.480 GHz), a data transfer range of ca. 10 meters (class II)

is achieved. The disturbance susceptibility through other

users of the ISM Frequency Range, such as for example

microwaves, WLAN (802.116) or garage door openers,

is minimised by so-called “Frequency-Hopping“. With

IB_91621_SBTF10C2_LB3.indb 4IB_91621_SBTF10C2_LB3.indb 4 20.08.13 12:2220.08.13 12:22

5

SBTF 10 C2

GB

IE

Frequency-Hopping, a change of frequency levels takes

place at up to 1600 times per second, thereby Bluetooth

®

is also reckoned to be relatively tap-proof.

Bluetooth® is a registered trademark of Bluetooth SIG, Inc.

All other names and brands are the property of their owner.

The HSP (Headset-Proﬁ l) makes possible standard func-

tions such as voice transference, as well as the accept-

ance and rejection of calls.

The HFP (Handsfree-Proﬁ l) makes possible the hands-free

call functions of a mobile telephone, for example with the

help of voice commands.

Package contents (see fold-out page)

Bluetooth

®

Hands-Free Kit

Operating instructions

Technical data

Operational voltage: 12-24 V

/ 1000 mA

Bluetooth

®

Speciﬁ cation: Version 3.0 + EDR,

up to a range of 10 meters

Supported Bluetooth

®

proﬁ les: HSP and HFP

Output Voltage USB port: 5 V

/ 1 A

Fuse: F2AL / 250 V

Dimensions (L x W x H): approx. 16,2 x 5,5 x 2,1 cm

Weight: approx. 70 g

Operational temperature: +15° to +40°C

Storage temperature: 0° to +70°C

Humidity: 5 to 75%

(no condensation)

IB_91621_SBTF10C2_LB3.indb 5IB_91621_SBTF10C2_LB3.indb 5 20.08.13 12:2220.08.13 12:22

GB

IE

6

SBTF 10 C2

Controls (see fold-out page)

1 Vehicle connector plug

2 Microphone

3 +/- Buttons

4 USB port

5 Loudspeakers

6 Multi-function button

7 LED status indicator

Installing the hands-free appliance

in a vehicle

So that the hands-free appliance can function correctly, it

is connected to the vehicle cigar lighter socket or on-board

power socket and provided with electricity from there.

● Ensure that the hands-free appliance engages completely

and that the operation of the vehicle is not negatively

inﬂ uenced. The LED status indicator 7 blinks twice every

3 seconds and a short high signal tone sounds once. The

appliance is in standby mode.

Note:

It is possible that the cigar lighter only functions when the

vehicle ignition is switched on. In cases of doubt, consult

the operating instructions for the particular vehicle.

Caution:

For vehicles in which the cigar lighter, resp. the vehicle cir-

cuit plug, also functions when the ignition is switched oﬀ :

● Use the hands-free appliance only when the motor is

running. Otherwise, the vehicle batteries could become

discharged over an extended period of time.

Note:

When you are not using the hands-free equipment remove

it from the vehicles cigarette lighter socket. Store it in a dry,

dust free location protected from direct sunlight.

IB_91621_SBTF10C2_LB3.indb 6IB_91621_SBTF10C2_LB3.indb 6 20.08.13 12:2220.08.13 12:22

7

SBTF 10 C2

GB

IE

Switching the hands-free

appliance on and oﬀ

Switching on: The appliance is switched oﬀ .

● Press and hold the multi-function button 6 for 3 seconds,

until a short and high signal tone is heard. The LED

status indicator 7 blinks twice every 3 seconds.

Switching oﬀ : The appliance is in standby mode.

● Press and hold the multi-function button 6 for 5 seconds,

until a long and deep signal tone is heard. The LED

status indicator 7 extinguishes.

Coupling the hands-free appliance

with a mobile telephone

The hands-free appliance has been especially developed

for mobile telephones that support the Bluetooth

®

Proﬁ le

“Handsfree (HFP) and Headset (HSP)“. Further informa-

tion about Bluetooth

®

radio technology is to be found in

the operating instructions for your mobile telephone.

Before you can use the hands-free appliance, you must

connect it with a compatible mobile telephone (pairing).

● Check to make sure the mobile telephone is switched on.

● Programme the mobile telephone so that it searches

for Bluetooth

®

appliances. A detailed description of

how to do this is to be found in the operating instruc-

tions for your mobile telephone.

● Ensure that the hands-free appliance is correctly set up

and switched oﬀ .

● To switch the device oﬀ , press and hold the multi-function

button 6 for about 3 seconds. A long, low signal

tone will be heard and the LED status indicator 7

extinguishes.

● Position the hands-free appliance and the mobile tele-

phone so that they are not more than 1 metre away

from each other.

● Press and hold down the multi-function button 6 for 6

seconds until, after 3 seconds a short, high signal tone

IB_91621_SBTF10C2_LB3.indb 7IB_91621_SBTF10C2_LB3.indb 7 20.08.13 12:2220.08.13 12:22

GB

IE

8

SBTF 10 C2

and after a further 3 seconds a succession of low and

high signal tones are heard. The LED status indicator

7 lights up constantly and the hands-free equipment is

now in the coupling mode.

● Select the hands-free provision “Car Kit“ from the list of

available appliances for the mobile telephone.

● Enter in the pre-programmed passcode “9999“ and

then conﬁ rm it, which couples the appliances with each

other. You will hear a long high signal tone and the

LED status indicator 7 blinks every 3 seconds.

● You can now use the hands-free appliance.

Note:

When using the latest mobile phones, (Smartphones) those

that are equipped with Bluetooth 2.0 or a more modern

version, it is possible that the pass code “9999“ need not

be entered. If the coupling is not completed within 2 min-

utes, the hands-free appliance switches itself oﬀ . The LED

status indicator 7 extinguishes and you will hear a long

and deep signal tone. With some mobile telephones it is

possible that coupling does not automatically take place.

In this case coupling must be carried out additionally on

the mobile telephone. The LED status indicator 7 blinks

twice every 3 seconds until this has been carried out. Fur-

ther information can be found in your mobile telephone’s

operating instructions.

Coupling the hands-free appliance

with several mobile telephones

You can couple the hands-free appliance with up to eight

mobile telephones. If a further mobile telephone is cou-

pled with the hands-free appliance, the coupling informa-

tion of the ﬁ rst coupled mobile telephone is erased. How-

ever, it can only be connected with one mobile telephone.

When the hands-free appliance is switched on, within a

few seconds it attempts to make a connection to the last

used mobile phone. Should a connection not be possible,

the hands-free appliance nonetheless remains recognis-

IB_91621_SBTF10C2_LB3.indb 8IB_91621_SBTF10C2_LB3.indb 8 20.08.13 12:2220.08.13 12:22

9

SBTF 10 C2

GB

IE

able for other mobile telephones. To use the hands-free

appliance with a linked mobile phone that is not the last

used mobile phone, the connection must be made via the

Bluetooth

®

menu of the mobile phone.

Separating the connection

If you wish separate the mobile telephone from the hands-

free appliance, for example, to connect it to another

Bluetooth

®

appliance:

● Switch the hands-free appliance oﬀ

or

● separate the connection over the Bluetooth

®

menu in

the mobile telephone.

You need not erase the coupling with the hands-free appli-

ance in the Bluetooth

®

menu to separate the connection.

Re-establishing the connection

If you want to reconnect the hands-free appliance with the

last used mobile phone:

● Check to see that Bluetooth

®

is activated in the mobile

telephone, then switch the hands-free appliance on.

When connecting to a previously coupled mobile telephone

it is not necessary to enter a pass-code. You can set your

mobile telephone so that when the hands-free equipment is

switched on a connection with the mobile telephone is auto-

matically established. As soon as the hands-free equipment

is connected to the previously coupled mobile telephone a

short, high signal tone is emitted conﬁ rming the connection.

Further information regarding automatic coupling can be

found in your mobile telephone’s operating instructions.

Using the hands-free appliance

After successful coupling, the following functions are

available to you. Some of the described functions are

only possible with a mobile telephone that supports the

Handsfree Proﬁ le (HFP).

IB_91621_SBTF10C2_LB3.indb 9IB_91621_SBTF10C2_LB3.indb 9 20.08.13 12:2220.08.13 12:22

GB

IE

10

SBTF 10 C2

Note:

The sound quality of the hands-free set is heavily depend-

ent on where it is installed. Where possible, set up your

hands-free set so that the microphone 2 is pointing in

your direction.

Call function

● Use your mobile telephone in the usual way to make a call.

● For redialing of the last number called, shortly press

the multi-function button 6 twice.

● For activation of voice dialling, shortly press the multi-

function button 6 once.

Note:

Voice dialing is only available with mobile telephones that

support this function. Further information regarding voice

dialing is to be found in the operating instructions for your

mobile telephone.

Accepting and ending a call

When you receive a call the LED status indicator 7 blinks

and you hear a call tone from the hands-free appliance.

If the call signal in your mobile phone is switched oﬀ , the

ringing tone is nonetheless sounded via the hands-free

appliance.

● Press the multi-function button 6 shortly once,

to accept the call.

● Press the multi-function button 6 shortly once,

to terminate the accepted call.

You can also accept and terminate the call over the

mobile telephone.

Automatic call acceptance

If automatic call acceptance is activated in the mobile tel-

ephone, it accepts the incoming call after a determined time

period and then passes it on to the hands-free appliance. Fur-

ther information regarding automatic call acceptance is to be

found in the operating instructions for your mobile telephone.

IB_91621_SBTF10C2_LB3.indb 10IB_91621_SBTF10C2_LB3.indb 10 20.08.13 12:2220.08.13 12:22

11

SBTF 10 C2

GB

IE

Rejection of a call

● Press the multi-function button 6 for 3 seconds to

reject an incoming telephone call.

Adjusting the volume of the hands-free appliance

You can adjust the sound volume level of the hands free

device with the +/- buttons 3.

● During a call, repeatedly press the + resp. - buttons 3

until the desired sound volume level is obtained. The

attainment of the maximum sound volume level is indi-

cated by a short signal tone.

Charging 5 V Devices

● Check the max. input voltage (5V) and the max. power

input (1000 mA) of the device which you want to charge.

For this, consult the operating manual of the device.

● Connect the device to be charged with the USB port 4

on the hands free device. The device now receives its

power supply from the hands free device. If the device

is equipped with a charging indicator light, this will in-

dicate that the device is being charged.

Troubleshooting

If you cannot connect the hands-free appliance with a

compatible mobile telephone, proceed as follows:

● Ensure that the Bluetooth

®

function in the mobile

telephone is activated.

● Ensure that the hands-free appliance is correctly

installed, switched on and supplied with electricity.

● If you use several Bluetooth

®

appliances, ensure that

a previously created Bluetooth

®

connection of the

mobile telephone is separated.

● Ensure that the hands-free appliance is distanced a ma-

ximum of 10 metres from the mobile telephone and that

there are no barriers or electronic devices between them.

IB_91621_SBTF10C2_LB3.indb 11IB_91621_SBTF10C2_LB3.indb 11 20.08.13 12:2220.08.13 12:22

GB

IE

12

SBTF 10 C2

Replacing the fuse

The hands-free set is equipped with a fuse. If the device

no longer works, check the fuse and replace if necessary.

● Open the vehicle connector plug 1 by turning the

ﬂ uted screw insert

A

gently anticlockwise – with pliers

if necessary – and remove it.

● Remove the plug tip

B

from the fuse

C

and pull the fuse

out. Ensure that the spring

D

in the vehicle connector

plug 1 does not accidentally jump out and become lost.

● Place a new fuse of type F2AL/250V into the vehicle

connector plug 1, place the plug tip

B

onto the end

of the fuse that is slightly protruding

C

and screw the

screw insert that you removed earlier

A

back in.

Risk of ﬁ re!

● Replace the fuse only with another of the same rating

as that given on the ratings plate. Fuses with a diﬀ erent

rating may cause ﬁ re. Smoke resulting from such a ﬁ re

is poisonous.

Note:

If these measures do not correct the problem, please con-

tact the appropriate service partner for your country.

D

C B A

IB_91621_SBTF10C2_LB3.indb 12IB_91621_SBTF10C2_LB3.indb 12 20.08.13 12:2220.08.13 12:22

13

SBTF 10 C2

GB

IE

Cleaning and Care

Danger of electrocution!

● Before cleaning, always separate the electricity supply

from the appliance!

● NEVER submerse the appliance in water or other liquids!

● Do not permit liquids to permeate into the housing!

● Never open the housing of the appliance! There are

no user-serviceable elements inside.

● Do not use strong detergents, solvents or abrasive

cleaning agents to clean the appliance. These could

damage the housing surfaces.

● Clean the housing surfaces with a slightly moist soft cloth.

Disposal

Do not dispose of the appliance in your

normal domestic waste. This product is

subject to the European guideline

2012/19/EU.

Dispose of the appliance through an approved disposal

centre or at your community waste facility. Observe the

currently applicable regulations. In case of doubt, please

contact your waste disposal centre.

Dispose of all packaging materials in an

environmentally responsible manner.

Warranty & Service

The warranty for this appliance is for 3 years from the

date of purchase. The appliance has been manufactured

with care and meticulously examined before delivery.

Please retain your receipt as proof of purchase. In the

event of a warranty claim, please make contact by

telephone with our Service Department. Only in this way

can a post-free despatch for your goods be assured.

The warranty covers only claims for material and

manufacturing defects, but not for transport damage, for

wearing parts or for damage to fragile components, e.g.

IB_91621_SBTF10C2_LB3.indb 13IB_91621_SBTF10C2_LB3.indb 13 20.08.13 12:2220.08.13 12:22

GB

IE

14

SBTF 10 C2

buttons or batteries. This product is for private use only

and is not intended for commercial use.

The warranty is void in the case of abusive and improper

handling, use of force and internal tampering not carried

out by our authorized service branch. Your statutory rights

are not restricted in any way by this warranty.

The warranty period will not be extended by repairs

made under warranty. This applies also to replaced and

repaired parts. Any damage and defects extant on pur-

chase must be reported immediately after unpacking the

appliance, at the latest, two days after the purchase date.

Repairs made after the expiration of the warranty period

are subject to payment.

Service Great Britain

Tel.: 0871 5000 720 (£ 0.10/Min.)

E-Mail: [email protected]

IAN 91621

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (oﬀ peak))

E-Mail: [email protected]

IAN 91621

Hotline availability:

Monday to Friday 08:00 - 20:00 (CET)

Importer

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

IB_91621_SBTF10C2_LB3.indb 14IB_91621_SBTF10C2_LB3.indb 14 20.08.13 12:2220.08.13 12:22

15

SBTF 10 C2

GB

IE

Declaration of EU Conformity

We, Kompernaß Handels GmbH, Burgstraße 21, 44867

Bochum, Germany, hereby declare that the product

SBTF 10 C2 Bluetooth

®

hands-free Kit complies with the

essential requirements and other relevant provisions of the

Motor Vehicle Directive 2004/104/EC, the R&TTE Directive

1999/5/EC, the Low Voltage Directive 2006/95/EC and

the RoHS Directive 2011/65/EU.

ID number: IAN 91621

Related harmonised standards:

EN 60950-1:2006 + A11:2009 + A1: 2010 + A12: 2011

ETSI EN 300 328 V1.7.1

ETSI EN 301 489-1 V1.9.2

ETSI EN 301 489-17 V2.2.1

EN 62479: 2010

EN 50581: 2012

ISO 7637-2: 2004

Bochum, 3.08.2013

Semi Uguzlu

Quality Manager

IB_91621_SBTF10C2_LB3.indb 15IB_91621_SBTF10C2_LB3.indb 15 20.08.13 12:2220.08.13 12:22

16

SBTF 10 C2

IB_91621_SBTF10C2_LB3.indb 16IB_91621_SBTF10C2_LB3.indb 16 20.08.13 12:2220.08.13 12:22

17

SBTF 10 C2

FI

Sisällysluettelo

Määräystenmukainen käyttö . . . . . . . . . . . . . . . . . . . . . 18

Turvallisuusohjeet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Johdanto . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Toimituksen sisältö (katso kääntösivu) . . . . . . . . . . . . . . 21

Tekniset tiedot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Käyttöelementit (katso kääntösivu) . . . . . . . . . . . . . . . . 22

Handsfree-laitteen kiinnittäminen ajoneuvoon. . . . . . . . . 22

Handsfree-laitteen päällekytkeminen ja sammuttaminen . 23

Handsfree-laitteen ja matkapuhelimen liittäminen pariksi 23

Handsfree-laitteen ja useiden matkapuhelinten

liittäminen pariksi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Yhteyden katkaiseminen . . . . . . . . . . . . . . . . . . . . . . . . 25

Yhteyden luominen uudelleen . . . . . . . . . . . . . . . . . . . . 25

Handsfree-laitteen käyttö . . . . . . . . . . . . . . . . . . . . . . . 26

5 V laitteiden lataaminen . . . . . . . . . . . . . . . . . . . . . . . 28

Vian korjaus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Puhdistus ja huolto. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Hävittäminen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Takuu ja huolto . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Maahantuoja . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

EU-vaatimustenmukaisuusvakuutus . . . . . . . . . . . . . . . . 32

IB_91621_SBTF10C2_LB3.indb 17IB_91621_SBTF10C2_LB3.indb 17 20.08.13 12:2220.08.13 12:22

Sivu latautuu ...

Silvercrest SBTF 10 C2 Operating Instructions Manual

Silvercrest SBTF 10 C2 Operating Instructions Manual

muilla kielillä

Liittyvät paperit

Muut asiakirjat