Motorola Talkabout T62 Blue/Black (2 штуки) Ohjekirja

Brändi: Motorola

Malli: Talkabout T62 Blue/Black (2 штуки)

Tyyppi: Ohjekirja

Talkabout T62

OWNER’S MANUAL

en-US

it-IT

pt-PT ru-RU fi

-FI sv-SE tr-TR

hu-

HU nl-NL nb-NO pl-PL

da-DK de-DE es-ES fr-FR

-UA

English

RF ENERGY EXPOSURE AND

PRODUCT SAFETY GUIDE FOR

PORTABLE TWO-WAY RADIOS

ATTENTION!

Before using this product, read the RF Energy Exposure and

Product Safety Guide that ships with the radio which

contains instructions for safe usage and RF energy

awareness and control for compliance with applicable

standards and regulation.

Package Contents

Personalization Stickers:

Stickers are provided in order to personalize and keep track

of radios. Use permanent marker for the blank stickers.

Frequency Chart

Note: *Only Channels 1 to 8 are available by default. Channels 9 to 16

need to be activated by user before they can be selected.

Channels 9 to 16 should only be used in countries where these

frequencies are allowed by government authorities.Channels 9 to

16 are not allowed in Russia.

Package Content

T62

Radio

Belt clip

Battery

Power Supply

Stickersheet(16pcs)

Owner’s manual

Ch. Freq. (MHz) Ch. Freq. (MHz) Ch. Freq. (MHz)

1 446.00625 7 446.08125 13 446.15625

2 446.01875 8 446.09375 14 446.16875

3 446.03125 9 446.10625 15 446.18125

4 446.04375 10 446.11875 16 446.19375

5 446.05625 11 446.13125

6 446.06875 12 446.14375

English

Features and Specifications

• 8 PMR Channels. User expandable to 16 Channels in

countries where allowed by government authorities.

• 121 Sub-Codes (38 CTCSS Codes & 83 DCS codes)

• Up to 8 km Range*

• iVOX/VOX

• Easy Pairing

• 20 Selectable Call Tone Alerts

• Backlit LCD Display

• Roger Tone

• Micro USB Connector for charging

• Battery Level Meter

• Channel Monitor

• Channel Scan

• Dual Channel Monitor

• Keypad Lock

• Auto Squelch Control

• Auto Repeat (Scrolling)

• Battery Low Alert

• Keypad Tone (On/Off)

• Power Source: NiMH battery Pack/3 x AA Alkaline

batteries

• Battery Life: 16 Hours (under typical use conditions)

Note: *Range may vary depending on environmental and/or

topographical conditions.

English

Radio Control Buttons and Display

Power

Note: *Only Channels 1 to 8 are available by default. Channels 9

to 16 need to be activated by user before they can be

selected.

Channels 9 to 16 should only be used in countries where

these frequencies are allowed by government authorities.

Channels 9 to 16 are not allowed in Russia.

1. Channel [1–8/* 1–16]

2. Call Tone [Off, 1–20]

3. Roger Tone [On/Off]

4. Dual Channel Monitor

5. Keypad Tone [On/Off]

6. Easy Pairing

7. Speaker Volume [0–7]

8. Battery Indicator [3

Battery Levels]

9. Status [Transmit]

10. Status [Receive]

11. Scan Indicator

12. Keypad Lock

13. iVOX [Off, L1, L2, L3]

VOX [Off, L1, L2, L3]

14. Sub-Code [0–121]

Lock

Screen

Speaker

Antenna

Micro-USB

Charging Port

Easy Pairing Button

Microphone

Call Tone

Scroll

Scan/Monitor

PTT Button

Accessory Port

Space for Personalization

Stickers

English

Installing the Batteries

Each radio can either use a NiMH rechargeable battery pack

or three units of AA Alkaline Battery, and beeps when the

batteries are low.

1. Make sure your radio is turned off.

2. To remove the battery compartment door, press the tab at

the bottom of the compartment door.

3. For NiMH battery pack, insert the battery pack with the

and signs facing you. Observe polarity.

For AA Alkaline batteries, insert the batteries. Observe

polarity.

4. Close the battery compartment door.

Radio Battery Meter

The number of bars (0–3) on the Radio Battery icon shown

indicates the charge remaining in the battery. When the radio

battery meter shows one segment left, the radio chirps

periodically or after releasing the PTT button (Low Battery

Alert).

Battery Capacity Maintenance

1. Charge the NiMH batteries once every three months

when not in use.

2. For storage purposes, remove the battery from the radio.

3. Store the NiMH batteries in a temperature between -20

°C to 35 °C and in low humidity. Avoid damp conditions

and corrosive materials.

Using the Micro-USB Charger

The micro-USB charger allows you to charge your NiMH

battery pack.

1. Power off your radio before start charging.

2. Plug the micro-USB cable into the micro-USB charging

port on your radio. Connect the other end of the micro-

USB charger to wall power outlet.

3. An empty battery will be fully charged in 8 hours.

4. The battery meter bar will scroll when the battery is

charging.

Note: It is recommended to power off your radio while charging.

However, if power is on while charging, you may not be able to

transmit a message if the battery is completely empty. Allow time

for the battery to charge to one bar before attempting to transmit a

message.

When moving between hot and cold temperatures, do not charge

the NiMH battery pack until the temperature acclimates (usually

about 20 minutes).

For optimal battery life, remove the radio from the charger within

16 hours. Do not store the radio while connected to the charger.

Turning your Radio On and Off

Press and hold the Power button to turn the radio on or off.

1. In the on position, the radio chirps and briefly shows all

feature icons available on the radio.

2. The display screen then shows the current channel, code,

and all features that are enabled.

Setting the Volume

From Standby Mode, press on either or to show the

current value. Press or again to adjust the volume

setting.

1. Press to increase the speaker volume.

2. Press to decrease the speaker volume.

Do not hold the radio close to your ear. If the volume is set to

an uncomfortable level, it could hurt your ear. Adjust ‘0’ to

mute the speaker.

English

Talking and Listening

All radios in your group must be set to the same channel and

Sub-Code in order to communicate.

1. Hold your radio 2–3 cm from your mouth.

2. Press and hold the PTT button while speaking. The

Transmit icon appears on the display.

3. Release the PTT button. You can now receive incoming

calls. When you do, the Receive icon appears on the

display.

For maximum clarity, hold the radio 2 to 3 cm away and

avoid covering the microphone while talking.

Talk Range

Your radio is designed to maximize performance and

improve transmission range. Ensure the radios are at least 5

feet apart when in used.

Monitor Button

Pressing and holding Scan/Monitor for 3 seconds to enter

Monitor mode and listen for weak signals on the current

channel. You can also listen to the volume level of the radio

when you are not receiving. This allows you to adjust the

volume, if necessary.

Push-to-Talk Time-out Timer

To prevent accidental transmissions and save battery life,

the radio emits a continuous warning tone and stops

transmitting if you press the PTT button for 60 seconds

continuously.

Menu Options

Note: *Only Channels 1 to 8 are available by default. Channels 9 to 16

need to be activated by user before they can be selected.

Channels 9 to 16 should only be used in countries where these

frequencies are allowed by government authorities. Channels 9 to

16 are not allowed in Russia.

Menu Key

Two Way Mode

Channel (1-8 / *1-16)

Sub-Code (0-121)

Call Tone (Off, 1-20)

Keypad Tones (On/Off)

Roger Tones (On/Off)

Dual Channel Monitor Channel (1-8 / *1-16)

Dual Channel Monitor Sub-Code (0-121)

Internal Voice Operated Transmission/

Voice Operated Transmission

(iVOX,VOX) (Off, L1,L2,L3)

English

Selecting the Channel

The channel is the frequency of the radio uses to transmit.

1. Press Menu until the channel number starts to flash.

2. Press or to change the channel. Long press on

these keys allows you to scroll through the channels

rapidly to browse the codes.

3. Press PTT button to exit menu or Menu to continue set

up.

Note: Your radio has eight channels by default. In countries where 16

channels are allowed, you can activate Channels 9 to 16 with the

following steps:

1. Press Menu until the channel number starts to flash.

2. Press and hold down and simultaneously for 3 seconds

until you hear a beep and “16 CH” is displayed briefly.

Note: *Only Channels 1 to 8 are available by default. Channels 9 to 16

need to be activated by user before they can be selected.

Channels 9 to 16 should only be used in countries where these

frequencies are allowed by government authorities.Channels 9 to

16 are not allowed in Russia.

Selecting the Sub-Code

Sub-Codes help minimize interference by blocking

transmissions from unknown sources. Your radio has 121

Sub-Codes.

To set the code for a channel:

1. Press Menu until the code starts to flash.

2. Press or to select the code. You can hold down the

button to speed up scrolling through the codes.

3. Press the PTT button to exit menu or Menu to continue

set up.

Setting and Transmitting Call Tones

Your radio can transmit different call tones to other radios

in your group so you can alert them that you want to talk.

Your radio has 20 call tones for you to choose from.

To set a call tone:

1. Press Menu until the Call Tone icon appears. The

current call tone setting will flash.

2. Press or to change and listen to the call tone.

3. Press the PTT button to exit menu or Menu to continue

set up.

In order to transmit your call tone to other radios, set up the

same channel and Sub-Code on your radio and press Call

Ton e.

Easy Pairing

The Easy Pairing feature allows a group of radio users to

program all their radios to the same Channel and Sub-Code

settings quickly and simultaneously. Any one radio within the

group can be designated as the “Leader’s radio” and have

it’s Channel and Sub-Code settings transmitted to and

copied by all the other radios in the group (Members’ radios).

1. Pick any one of the radios as the “Leader’s radio”. On this

radio, program the Channel and Sub-Code to the desired

settings.(See “Selecting the Channel” and “Selecting the

Sub-Code” sections in this user manual)

2. To copy the channel and Sub-Code combination to all the

other “Members’ radios”, press and hold the button on

the Members’ radios until you hear a beep. Release the

button after the beep, and wait for the transmission from

the Leader’s radio.

English

Note:

• You will see the icon blinking on the display. This confirms that

the radio is in Easy Pairing mode waiting to receive the Channel

and Sub-Code settings from the Leader’s radio. All Members’

radios will remain in this mode for 3 minutes.

• A group with many radios should have all users take this step at

the same time, so all radios can be programmed in one go.

3. On the Leader’s radio, press and hold down the button

until you hear a double beep.

Note:

• At the double beep, this radio’s Channel and Sub-Code settings

will be transmitted, which will be received and copied by all the

other (Members’) radios.

• The Leader’s radio must make this transmission when all the

Members’ radios are still in the Easy Pairing mode, otherwise the

transmission will not be picked up.

• On the Leader’s radio, user must remember not to release the

button on the first (single) beep, otherwise this radio will become

another Member’s radio. If that happens, you can press PTT to

escape, and retry the steps described in #3 again.

• If the Leader’s radio is set to a channel between 9 and 16, please

ensure that all Members’ radios have channels 9 to 16 activated.

• When a Member’s radio with only eight Channels is being Easy-

Paired by a Leader’s radio on Channel 9 or above, Easy-Pairing

will fail, indicated by three short beeps, and “Err” is displayed briefly.

Internal Voice Operated Transmission/

Voice Operated Transmission ( / )

Transmission is initiated by speaking into the microphone of

the radio/audio accessory instead of pushing the PTT button.

1. Press Menu until the icon appears on the display.

When audio accessory is connected, the icon will

be shown. The current setting (Off, L1–L3) will flash.

2. Press or to select the sensitivity level.

3. Press the PTT button to exit menu or Menu to continue

set up.

Note: When using iVOX/VOX, there will be a short delay.

Dual Channel Monitor

Enables you to scan the current channel and another

channel alternately.

To set another channel and start Dual Channel Monitor:

1. Press Menu until the Dual Channel Monitor icon

appears. The Dual Channel Monitor icon will flash.

2. Press or to select the channel then press Menu.

3. Press or to select the Sub-Code.

4. Press the PTT button or wait until time out to activate

Dual Channel Monitor. The screen will alternate between

home channel and Dual Channel Monitor channel.

5. To end Dual Channel Monitor, press Menu.

Note: If you set the same channel and Sub-Code as the current channel,

Dual Channel Monitor does not work.

Keypad Tones

You may enable or disable the keypad tones. You will hear

the key tone each time a button is pushed.

1. Press Menu until the Keypad Tone icon appears.

The current setting on/off will flash.

2. Press either or to turn on/off.

3. Press the PTT button to confirm or Menu to continue

set up.

L3 = High Sensitivity for quiet environments

L2 = Medium Sensitivity for most environments

L1 = Low Sensitivity for noisy environments

English

Roger Tone

You can set your radio to transmit a unique tone when you

finish transmitting. It is like saying “Roger” or “Over” to let

others know you have finished talking.

1. Press Menu until the Roger Tone icon appears. The

current setting on/off flashes.

2. Press or to turn on or off.

3. Press the PTT button to set or Menu to continue set

up.

Keypad Lock

To avoid accidentally changing your radio settings:

1. Press and hold Key Lock until the Key Lock Indicator

icon displays.

2. You can turn the radio on and off, adjust the volume,

receive, transmit, send a call tone, send Emergency

Alert, and monitor channels when in the lock mode. All

other functions remain locked.

3. Press Key Lock and hold until the Key Lock Indicator

is no longer displayed to unlock the radio.

Scanning

Use the scan function to do the following:

• Search all channels for transmissions from unknown

parties.

• Find someone in your group who has accidentally

changed channels or

• To quickly find unused channels for your own use.

There is a priority feature and two modes of scanning

(basic and advanced) to make your search more

effective.

• The “Basic Scan” mode uses the channel and code

combinations for each of the channel as you have set

them (or with the default code value of 1).

• The “Advance Scan” mode will scan all channels for any

and all codes; detect any code in use and use that code

value temporary for that channel.

• Priority is given to the “Home Channel” (i.e. the channel

and Sub-Code your radio is set to when you start the

scan). This means the initial channel (and code settings)

is scanned more often than the other seven channels and

your radio will respond quickly to any activity occurring on

the home channel as a priority.

To start Basic Scanning:

1. Press the Scan/Monitor button briefly. The Scan

icon will appear in the display and the radio will begin to

scroll through the channel and code combinations.

2. When the radio detects channel activities matching the

channel and Sub-Code combination, the radio will stop

scrolling and you can hear the transmission.

3. Press the PTT button within 5 seconds after the end of

the transmission to respond and talk to the person

transmitting.

4. The radio will resume scrolling through the channels

5 seconds after the end of any received activity.

5. Press the Scan/Monitor button briefly to stop scanning.

To start Advanced Scanning:

1. Set home channel’s Sub-Code to “zero” or off.

2. Press the Scan/Monitor button briefly. The Scan

icon will appear in the display and the radio will begin to

English

scroll through the channels. No Sub-Codes will filter what

is heard.

3. When the radio detects channel activities with any code

(or no code), it stops scrolling and you can hear the

transmission. Any Sub-Code that may be use by other

party will be detected and displayed.

4. To respond and talk to the person transmitting, press the

PTT button within 5 seconds after the end of the

transmission.

5. The radio will resume scrolling through the channels 5

seconds after the end of any received activity.

6. Press the Scan/Monitor button briefly to stop scanning.

Note:

1. The transmission will be on the “Home Channel” if you press the PTT

button while the radio is scrolling through inactive channels. You may

press the Scan/Monitor button to stop scanning at any time.

2. You may immediately resume the scan by briefly pressing or if

the radio stops on an undesired transmission.

3. You may temporarily remove that channel from the scan list by

pressing and holding or for 3 seconds if the radio stops

repeatedly on an undesired transmission. You may remove more

than one channel this way.

4. Turn the radio off and then turn back on, or exit and re-enter the

scanning mode by pressing Scan/Monitor to restore and remove

channel(s) to the scan list.

5. You cannot remove the “Home Channel” from the scan list.

6. In the Advanced Scan, the detected code will only be used for one

transmission. You must take note of that code, exit scan, and set the

detected code on that channel to permanently use.

Warranty Information

The authorized Motorola Solutions dealer or retailer where

you purchased your Motorola Solutions two-way radio and/or

original accessories will honour a warranty claim and/or

provide warranty service.

Please return your radio to your dealer or retailer to claim

your warranty service. Do not return your radio to Motorola

Solutions.

In order to be eligible to receive warranty service, you must

present your receipt of purchase or a comparable substitute

proof of purchase bearing the date of purchase. The two-

way radio should also clearly display the serial number. The

warranty will not apply if the type or serial numbers on the

product have been altered, deleted, removed, or made

illegible.

English

What Is Not Covered By The Warranty

• Defects or damage resulting from use of the Product in

other than its normal and customary manner or by not

following the instructions in this user manual.

• Defects or damage from misuse, accident or neglect.

• Defects of damage from improper testing, operation,

maintenance, adjustment, or any alteration or

modification of any kind.

• Breakage or damage to aerials unless caused directly by

defects in material or workmanship.

• Products disassembled or repaired in such a manner as

to adversely affect performance or prevent adequate

inspection and testing to verify any warranty claim.

• Defects or damage due to range.

• Defects or damage due to moisture, liquid or spills.

• All plastic surfaces and all other externally exposed parts

that are scratched or damaged due to normal use.

• Products rented on a temporary basis.

• Periodic maintenance and repair or replacement of parts

due to normal usage, wear and tear.

The Motorola Solutions products described in this manual

may include copyrighted Motorola Solutions programs,

stored semiconductor memories or other media. Laws in the

United States and other countries preserve for Motorola

Solutions, certain exclusive rights for copyrighted computer

programs, including the exclusive right to copy or reproduce

in any form, the copyrighted Motorola Solutions programs.

Accordingly, any copyrighted Motorola Solutions computer

programs contained in the Motorola Solutions products

described in this manual may not be copied or reproduced in

any manner without express written permission of Motorola

Solutions. Furthermore, the purchase of Motorola Solutions

products shall not be deemed to grant either directly or by

implication, estoppel, or otherwise, any license under the

copyrights, patents or patent applications of Motorola

Solutions, except for the normal non-exclusive royalty free

license to use that arises by operation of law in the sale of a

products.

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the

Stylized M logo are trademarks or registered trademarks of

Motorola Trademark Holdings, LLC and are used under

license. All other trademarks are the property of their

respective owners.

Dansk

VEJLEDNING OM RF-

ENERGIEKSPONERING OG

PRODUKTSIKKERHED TIL BÆRBARE

TOVEJSRADIOER

OBS!

Inden brug af radioen skal du læse vejledningen om

RF-energieksponering og sikkerhed, der leveres sammen

med radioen. Vejledningen indeholder instruktioner

omkring sikker brug, opmærksomhed omkring forekomst

af RF-energi og kontrol af overholdelse af gældende

standarder og bekendtgørelser.

Pakkens indhold

Etiketter til personlig tilpasning:

Etiketter leveres med henblik på personlig tilpasning og for

at holde styr på radioerne. Brug permanent markør til de

tomme etiketter.

Frekvenstabel

Bemærk: *Kun Kanal 1 til 8 er tilgængelige som standard. Kanal 9 til 16

skal aktiveres af brugeren, før de kan vælges. Kanal 9 til 16 må

kun bruges i lande, hvor myndighederne tillader brug af disse

frekvenser. Kanalerne 9 til 16 må ikke anvendes i Rusland.

Pakkens indhold

T62

Radio

Bælteclips

Batteri

Strømforsyning

Ark med etiketter (16 stk.)

Brugervejledning

K. Frekv. (MHz) K. Frekv. (MHz) K. Frekv. (MHz)

1 446,00625 7 446,08125 13 446,15625

2 446,01875 8 446,09375 14 446,16875

3 446,03125 9 446,10625 15 446,18125

4 446,04375 10 446,11875 16 446,19375

5 446,05625 11 446,13125

6 446,06875 12 446,14375

Dansk

Funktioner og specifikationer

• 8 PMR-kanaler. Kan udvides af brugeren til 16 kanaler

i lande, hvor myndighederne tillader dette.

• 121 delkoder (38 CTCSS-koder og 83 DCS-koder)

• Rækkevidde på op til 8 km*

• iVOX/VOX

• Nem parring

• 20 opkaldstonealarmer, som brugeren vælger

• Baggrundsbelyst LCD-skærm

• Modtaget-tone

• Micro-USB-stik til opladning

• Batteriniveaumåler

• Kanalskærm

• Kanalscanning

• Overvågning af to kanaler

•Tastelås

• Automatisk squelch-styring

• Automatisk gentagelse (rulning)

• Advarsel om lavt batteriniveau

• Tastaturtone (Til/Fra)

• Strømkilde: NiMH-batteripakke / 3 x AA-alkalinebatterier

• Batteritid: 16 timer (under normale brugsforhold)

Bemærk: *Intervallet kan variere afhængigt af miljømæssige og/eller

topografiske forhold.

Dansk

Radioens kontrolknapper og display

Tænd/

sluk

Bemærk: *Kun Kanal 1 til 8 er tilgængelige som standard. Kanal

9 til 16 skal aktiveres af brugeren, før de kan vælges.

Kanal 9 til 16 må kun bruges i lande, hvor

myndighederne tillader brug af disse frekvenser. Kanal

9 til 16 må ikke anvendes i Rusland.

1. Kanal [1-8/ * 1-16]

2. Opkaldstone [Fra, 1-20]

3. Modtaget-tone [Til/Fra]

4. Overvågning af to

kanaler

5. Tastaturtone [Til/Fra]

6. Nem parring

7. Lydstyrke for højttaler

[0- 7]

8. Batteriindikator [3

batteriniveauer]

9. Status [Send]

10. Status [Modtag]

11. Indikator for scanning

12. Tastelås

13. iVOX [Fra, L1, L2, L3];

VOX [L1, L2, L3]

14. Delkode [0- 121]

Lås

Skærm

Højttaler

Antenne

Micro-USB

Opladerport

Knap til nem parring

Mikrofon

Opkaldstone

Rul

Scan/Monitor

PTT-knap

Adgangsport

Plads til etiketter til per-

sonlig tilpasning

Dansk

Installer batterierne

Hver radio kan enten bruge en genopladelig NiMH-

batteripakke eller tre AA-alkalinebatterienheder og bipper,

når batterierne er ved at løbe tør for strøm.

1. Sørg for, at radioen er slukket.

2. Du kan fjerne dækslet til batterirummet ved at trykke på

tappen nederst på dækslet.

3. For NiMH-batteripakke skal du indsætte batteripakken

med symbolerne og mod dig selv. Vær opmærksom

på polariteten.

For AA-alkalinebatterier skal du sætte batterierne ind.

Vær opmærksom på polariteten.

4. Luk dækslet til batterirummet.

Radioens batterimåler

Antallet af viste søjler (0 – 3) på radiobatteriikonet angiver

den resterende opladning i batteriet. Når radioens

batterimåler har ét segment tilbage, bipper radioen

regelmæssigt, eller når PTT-knappen slippes (advarsel om

lavt batteriniveau).

Vedligeholdelse af batterikapacitet

1. Oplad NiMH-batterierne én gang hver tredje måned,

når de ikke er i brug.

2. Ved opbevaring skal du tage batteriet ud af radioen.

3. Opbevar NiMH-batterierne ved en temperatur på mellem

-20 °C og 35 °C og ved lav luftfugtighed. Undgå fugtige

forhold og ætsende stoffer.

Brug af micro-USB-opladeren

Micro-USB-opladeren gør det muligt for dig at oplade NiMH-

batteripakken.

1. Sluk for radioen, før du starter opladningen.

2. Indsæt micro-USB-kablet i micro-USB-ladeporten på

radioen. Slut den anden ende af micro-USB-opladeren til

en stikkontakt.

3. Et tomt batteri er fuldt opladet efter 8 timer.

4. Bjælken på batterimåleren ruller, mens batteriet oplades.

Bemærk: Det anbefales at slukke for radioen under opladning. Hvis

radioen er tændt under opladningen, kan du muligvis ikke

transmittere en meddelelse, hvis batteriet er løbet helt tør for

strøm. Lad batteriet blive opladet til én bjælke, inden du

forsøger at transmittere en meddelelse.

Når der skiftes mellem varme og kolde temperaturer, må

NiMH-batteriet ikke oplades, før temperaturen akklimatiseres

(normalt ca. 20 minutter).

For at opnå den optimale batteritid skal radioen fjernes fra

opladeren inden for 16 timer. Opbevar ikke radioen, mens den

er tilsluttet opladeren.

Sådan tænder og slukker du radioen

Tryk på Tænd/sluk-knappen, og hold den nede for at tænde

eller slukke radioen.

1. Når radioen er tændt, kvidrer den og viser kort alle

funktionsikoner, der findes på radioen.

2. Visningsskærmen viser derefter den aktuelle kanal, kode

og alle funktioner, der er aktiveret.

Indstilling af lydstyrken

Når radioen er i tilstanden Standby, skal du trykke på enten

eller for at vise den aktuelle kanal. Tryk igen på eller

for at indstille lydstyrken.

1. Tryk på for at øge lydstyrken for højttaleren.

2. Tryk på for at mindske lydstyrken for højttaleren.

Undgå at holde radioen tæt ved øret. Hvis lydstyrken er

indstillet til et ubehageligt niveau, kan det skade dit øre.

Indstil '0' for at sætte højttaleren på lydløs.

Dansk

Tale og lytte

Alle radioer i gruppen skal være indstillet til samme kanal og

delkode for at kunne kommunikere.

1. Hold radioen 2-3 cm fra munden.

2. Tryk på tasten PTT, og hold den nede, mens du taler.

Ikonet for transmission vises på skærmen.

3. Slip knappen PTT. Du kan nu modtage indgående

opkald. Når du gør det, vises ikonet for Modtag på

skærmen.

For at få den bedste lydkvalitet skal du holde radioen 2 til 3 cm

væk og undgå at dække mikrofonen, mens du taler.

Rækkevidde for tale

Radioen er designet til at maksimere ydeevnen og forbedre

transmissionsrækkevidden. Sørg for, at radioer er mindst

5 meter fra hinanden, når de anvendes.

Knappen Monitor

Tryk på og hold Scan/Monitor i 3 sekunder for at gå i

monitortilstand og lytte efter svage signaler på den aktuelle

kanal. Du kan også lytte til radioens lydstyrke, når du ikke

modtager. Dette giver dig mulighed for at justere lydstyrken,

hvis det er nødvendigt.

Push-to-Talk Time-out timer

For at forhindre utilsigtede transmissioner og for at spare

batteritid, udsender radioen en konstant advarselstone

og standser transmissionen, hvis du trykker på knappen PTT

konstant i 60 sekunder.

Menuindstillinger

Bemærk: *Kun Kanal 1 til 8 er tilgængelige som standard. Kanal 9 til 16

skal aktiveres af brugeren, før de kan vælges.

Kanal 9 til 16 må kun bruges i lande, hvor myndighederne

tillader brug af disse frekvenser. Kanal 9 til 16 må ikke

anvendes i Rusland.

Menutast

Tovejstilstand

Kanal (1-8 / *1-16)

Delkode (0-121)

Opkaldstone (Fra, 1-20)

Tastaturtoner (Til/Fra)

Modtaget-toner (Til/Fra)

Kanal til overvågning af to kanaler (1-8 / *1-16)

Delkode for overvågning af to kanaler (0-121)

Intern stemmestyret transmission/

Stemmestyret transmission

(iVOX,VOX) (Fra, L1, L2, L3)

Dansk

Sådan vælger du kanalen

Kanalen er den frekvens, som radioen bruger til at

transmittere.

1. Tryk på Menu, indtil kanalnummeret begynder at blinke.

2. Tryk på eller for at skifte kanal. Et langt tryk på disse

taster giver dig mulighed for hurtigt at rulle igennem

kanalerne for at gennemse koderne.

3. Tryk på knappen PTT for at forlade menuen eller på

Menu for at forsætte opsætningen.

Bemærk: Radioen har som standard otte kanaler. I lande, hvor 16

kanaler er tilladt, kan du aktivere kanal 9 til 16 ved at udføre

følgende trin:

1. Tryk på Menu, indtil kanalnummeret begynder at blinke.

2. Tryk samtidigt på og , og hold dem nede i 3 sekunder,

indtil du hører et bip, og "16 CH" vises kortvarigt.

Bemærk: *Kun Kanal 1 til 8 er tilgængelige som standard. Kanal 9 til 16

skal aktiveres af brugeren, før de kan vælges. Kanal 9 til 16 må

kun bruges i lande, hvor myndighederne tillader brug af disse

frekvenser. Kanalerne 9 til 16 må ikke anvendes i Rusland.

Valg af delkoden

Delkoder hjælper med at minimere interferens ved at blokere

transmissioner fra ukendte kilder. Radioen har 121 delkoder.

Sådan angiver du koden for en kanal:

1. Tryk på Menu, indtil koden begynder at blinke.

2. Tryk på eller for at vælge koden. Du kan trykke på

knappen og holde den nede for at rulle hurtigere gennem

koderne.

3. Tryk på knappen PTT for at forlade menuen eller på

Menu for at fortsætte opsætningen.

Indstilling og transmission af

opkaldstoner

Radioen kan sende forskellige opkaldstoner til andre radioer

i gruppen, så du kan give dem besked om, at du vil tale.

Radioen har 20 opkaldstoner, som du kan vælge imellem.

Sådan indstiller du en opkaldstone:

1. Tryk på Menu, indtil ikonet for opkaldstone vises.

Den aktuelle opkaldstoneindstilling blinker.

2. Tryk på eller for at skifte og høre opkaldstonen.

3. Tryk på knappen PTT for at forlade menuen eller på

Menu for at fortsætte opsætningen.

For at transmittere dit opkald til andre radioer skal du

indstille den samme kanal og delkode på radioen og trykke

på Opkaldstone.

Nem parring

Funktionen Nem parring gør det muligt for en gruppe

radiobrugere at programmere alle deres radioer til de

samme kanal- og delkodeindstillinger hurtigt og samtidigt.

Enhver radio i gruppen kan angives som "Lederens radio" og

få sine kanal- og delkodeindstillinger overført til og kopieret

på alle de andre radioer i gruppen (Medlemmernes radioer).

1. Vælg en hvilken som helst radio som "Lederens radio".

På denne radio skal du programmere kanalen og

delkoderne til de ønskede indstillinger (se afsnittene

"Sådan vælger du kanalen" og "Valg af delkoden" i denne

brugermanual).

2. For at kopiere kombinationen af kanal og delkode til alle

de øvrige "Medlemmernes radioer" skal du trykke på

og holde knappen nede på medlemmernes radioer,

til du hører et bip. Slip knappen efter bippet, og vent på

transmissionen fra lederens radio.

Dansk

Bemærk:

• Du vil se ikonet blinke på displayet. Det bekræfter, at radioen er

i nem parringstilstand og venter på at modtage indstillingerne for

kanal og delkode fra lederens radio. Alle medlemmernes radioer

forbliver i denne tilstand i 3 minutter.

• I en gruppe med mange radioer bør alle brugere udføre dette trin

samtidigt, så alle radioerne kan programmeres på én gang.

3. På lederens radio skal du trykke på knappen og holde

den nede, indtil du hører et dobbelt bip.

Bemærk:

• Ved det dobbelte bip bliver denne radios kanal- og

delkodeindstillinger overført, så de modtages og kopieres af alle

de andre (medlemmers) radioer.

• Lederens radio skal foretage denne transmission, mens alle

medlemmernes radioer stadig er i nem parringstilstand, ellers

bliver transmissionen ikke modtaget.

• På lederens radio må brugeren ikke slippe knappen efter det

første (enkelte) bip, ellers bliver denne radio endnu en

medlemsradio. Hvis det sker, kan du trykke på PTT for at afslutte

og forsøge at udføre de trin, der er beskrevet i nr. 3, igen.

• Hvis lederens radio er indstillet til en kanal mellem 9 og 16, skal

du sikre dig, at alle medlemmernes radioer har aktiveret

kanalerne 9 til 16.

• Når en medlemsradio med kun 8 kanaler nemt parres af en leders

radio på kanal 9 eller derover, mislykkes Nem parring. Dette

angives med tre korte bip, og "Err" vises kortvarigt.

Intern stemmestyret transmission/

Stemmestyret transmission ( / )

Transmission startes ved at tale ind i mikrofonen på radioen/

lydtilbehøret i stedet for at trykke på knappen PTT.

1. Tryk på Menu, indtil ikonet vises på displayet.

Når lydtilbehør er tilsluttet, vises ikonet . Den

aktuelle indstilling (Fra, L1–L3) blinker.

2. Tryk på eller for at vælge følsomhedsniveau.

3. Tryk på knappen PTT for at forlade menuen eller på

Menu for at fortsætte opsætningen.

Bemærk: Når du bruger iVOX/VOX, er der en kort forsinkelse.

Overvågning af to kanaler

Giver dig mulighed for at scanne den aktuelle kanal og en

anden kanal skiftevis.

Sådan indstilles en anden kanal, og overvågning af to

kanaler startes:

1. Tryk på Menu, indtil ikonet for overvågning af to

kanaler vises. Ikonet for overvågning af to kanaler

blinker.

2. Tryk på eller for at vælge kanalen, og tryk derefter

på Menu.

3. Tryk på eller for at vælge delkoden.

4. Tryk på PTT-knappen, eller vent indtil timeout for at

aktivere overvågning af to kanaler. Skærmen vil skifte

mellem startkanalen og kanalen til overvågning af to

kanaler.

5. Du kan afslutte overvågning af to kanaler ved at trykke

på Menu.

Bemærk: Hvis du indstiller den samme kanal og delkode som den

aktuelle kanal, vil overvågning at to kanaler ikke fungere.

L3 = høj følsomhed til stille omgivelser

L2 = medium følsomhed til de fleste omgivelser

L1 = lav følsomhed til støjende omgivelser

Dansk

Tastaturtoner

Du kan aktivere eller deaktivere tastaturtonerne. Du hører

tastetonen, hver gang du trykker på en knap.

1. Tryk på Menu, indtil ikonet for tastaturtone vises.

Den aktuelle indstilling Til/Fra blinker.

2. Tryk på enten eller for at slå Til/Fra.

3. Tryk på knappen PTT for at bekræfte eller Menu for at

fortsætte opsætningen.

Modtaget-tone

Du kan indstille radioen til at transmittere en unik tone, når

du er færdig med at transmittere. Det svarer til at sige

"Modtaget" eller "Skifter" for at lade andre vide, at du er

færdig med at tale.

1. Tryk på Menu, indtil ikonet for modtaget-tone vises.

Den aktuelle indstilling Til/Fra blinker.

2. Tryk på eller for at slå Til eller Fra.

3. Tryk på knappen PTT for at indstille eller på Menu for

at fortsætte opsætningen.

Tastelås

For at undgå utilsigtet ændring af radioens indstillinger:

1. Tryk på Tastelås, og hold den nede, indtil ikonet for

tastelåsindikator vises.

2. Du kan tænde og slukke radioen, justere lydstyrken,

modtage, transmittere, sende en opkaldstone, sende

nødalarm og overvåge kanaler i låst tilstand. Alle andre

funktioner forbliver låst.

3. Tryk på Tastelås, og hold den nede, indtil

tastelåsindikatoren ikke længere vises, for at låse radioen.

Scanning

Brug scanningsfunktionen til at gøre følgende:

• Søg på alle kanaler efter transmissioner fra ukendte parter.

• Find en person i gruppen, som er kommet til at skifte

kanal, eller

• For hurtigt at finde ubrugte kanaler til eget brug.

Der er en prioriteringsfunktion og to indstillinger for

scanning (basis og avanceret), som kan gøre din

søgning mere effektiv.

• Tilstanden "Basic Scan" bruger kanal- og

kodekombinationer for hver af de 8 kanaler, som du har

indstillet dem (eller med standardkodeværdien 1).

• Tilstanden "Advanced Scan" vil altid scanne alle kanaler

for alle koder. Find en kode, der er i brug, og brug den

kodeværdi midlertidigt for den pågældende kanal.

• "Home Channel" prioriteres (dvs. den kanal og delkode,

som radioen er indstillet til, når du starter scanningen).

Det betyder, at den første kanal (og kodeindstillinger)

scannes oftere end de andre syv kanaler, og radioen

vil som prioritet reagere hurtigt på enhver aktivitet,

der foregår på startkanalen.

Sådan startes basisscanningen:

1. Tryk kortvarigt på knappen Scan/Monitor. Ikonet for

scanning vises på skærmen, og radioen begynder at

rulle gennem kanal- og kodekombinationerne.

2. Når radioen registrerer kanalaktiviteter, der passer til

kombinationen af kanal og delkode, vil radioen holde op

med at rulle, og du kan høre transmissionen.

3. Tryk på knappen PTT inden for 5 sekunder efter

transmissionens afslutning for at svare og tale med den

person, der transmitterer.

Sivu latautuu ...

Motorola Talkabout T62 Blue/Black (2 штуки) Ohjekirja

Brändi: Motorola

Malli: Talkabout T62 Blue/Black (2 штуки)

Tyyppi: Ohjekirja

Lataa PDF

raportti

muilla kielillä

polski: Motorola Talkabout T62 Blue/Black (2 штуки) Instrukcja obsługi
Türkçe: Motorola Talkabout T62 Blue/Black (2 штуки) Kullanım kılavuzu
English: Motorola Talkabout T62 Blue/Black (2 штуки) User manual
svenska: Motorola Talkabout T62 Blue/Black (2 штуки) Användarmanual
русский: Motorola Talkabout T62 Blue/Black (2 штуки) Руководство пользователя
italiano: Motorola Talkabout T62 Blue/Black (2 штуки) Manuale utente
Deutsch: Motorola Talkabout T62 Blue/Black (2 штуки) Benutzerhandbuch
português: Motorola Talkabout T62 Blue/Black (2 штуки) Manual do usuário
dansk: Motorola Talkabout T62 Blue/Black (2 штуки) Brugermanual
français: Motorola Talkabout T62 Blue/Black (2 штуки) Manuel utilisateur
español: Motorola Talkabout T62 Blue/Black (2 штуки) Manual de usuario
Nederlands: Motorola Talkabout T62 Blue/Black (2 штуки) Handleiding

Motorola Talkabout T62 Blue/Black (2 штуки) Ohjekirja

Motorola Talkabout T62 Blue/Black (2 штуки) Ohjekirja

muilla kielillä

Liittyvät paperit

Muut asiakirjat