Philips TAE8005BK/10 Ohjekirja

User manual

Brugervejledning

Benutzerhandbuch

Manual del usuario

Käyttöopas

Mode d’emploi

Manuale utente

Gebruiksaanwijzing

Brukerhåndbok

Användarhandbok

8000 Series

TAE8005

Headphones

Register your product and get support at

www.philips.com/support

English

EN 1

Contents

1 Important safety instructions 2

Hearing Safety 2

General information 2

2 Your wireless stethoscope 3

What's in the box 3

Overview of the stethoscope 4

Overview of the docking station 4

3 Get started 5

Connect 5

Install the supplied batteries 6

Charge the stethoscope 6

4 Use your stethoscope 7

Auto switch on/off 7

Adjust the volume 7

Adjust the left/right balance 7

Amplify the environmental sound 7

Equalizer (EQ) 7

Store and charge the stethoscope 7

5 LED and sound indication 8

LED indication 8

Sound indication 8

6 Care and maintainence 8

Clean the stethoscope and docking

station 8

Clean the ear caps 8

7 Accessories 9

8 Technical data 9

9 Notice 10

Declaration of conformity 10

Compliance with EMF 10

Disposal of your old product and

battery 10

10 Frequently asked questions 11

Contents

Indholdsfortegnelse

2 EN

1 Important safety

instructions

Hearing Safety

Danger

•

To avoid hearing damage, limit the time you use

headphones at high volume and set the volume to a

safe level. The louder the volume, the shorter the safe

listening time is.

Be sure to observe the following guidelines

when using your headset.

• Listen at reasonable volumes for reasonable

periods of time.

• Be careful not to adjust the volume

continuously upwards as your hearing

adapts.

• Do not turn up the volume so high that

you can’t hear what’s around you.

• You should use caution or temporarily

discontinue use in potentially hazardous

situations.

• Excessive sound pressure from earphones

and headphones can cause hearing loss.

• Using headphones with both ears covered

while driving is not recommended and may

be illegal in some areas while driving.

• For your safety, avoid distractions from

other potentially dangerous environments.

General information

Caution

•

product dry. Do not expose it to excessive heat by

heating equipment or direct sunlight.

•

be placed on the apparatus.

• Do not allow your product to be submerged in water.

•

cloth. Do not use cleansing agents containing alcohol,

spirits, ammonia or abrasives as they may harm the

product.

• Do not disassemble the product.

• Do not operate or store the product in a place where

• This product shall not be exposed to dripping or

splashing.

• The mains plug of AC/DC adapter is used as the

disconnect device, the disconnect device shall be readily

operable.

• Use only the supplied batteries.

• Other types of rechargeable or alkaline batteries cannot

be charged with this system.

• Batteries (battery pack or batteries installed) shall not

the like.

• Risk of explosion! Keep batteries away from heat,

English

EN 3

2 Your wireless

stethoscope

What's in the box

*Philips wireless stethoscope

Docking station

Power adapter

3.5mm audio cable

Optical cable

RCA adapter

*Rechargeable lithium-polymer battery

Spare ear caps

User manual

Quick start guide

4 EN

Overview of the stethoscope Overview of the docking

station

1, Ear cap

2, Wireless/ambient mode button

3, Wireless/ambient mode indicator

4, Left/right balance control

5, Volume control button

6, Battery

1, Audio input

2, AUDIO IN/OPTICAL IN switch

3, Optical input

4, ATT (Attenuation of audio input signal switch)

5, POWER (Power the docking station on or off)

6, Power adapter jack

7, Battery charging slot

8, Stethoscope charging slot

9, Equalizer (EQ) button

10, Battery charging indicator

11, Stethoscope charging indicator

12, Equalizer (EQ) indicators

EQ1: voice emphasis

EQ2: treble boost

EQ3: bass boost

English

EN 5

3 Get started

Caution

•

Make sure that you have read the safety instructions in

the 'Important safety instructions' section before you

connect and install your stethoscope.

Connect

1. Connect the audio device

Note

•

station automatically turns off.

• The energizing docking station does not transmit audio

signal when charging.

• You can charge one stethoscope each time.

See the following instructions to connect the

audio device and adjust ATT.

For TV or other devices with 3.5mm audio

• connect one side of the supplied 3.5mm

audio cable to the 3.5mm audio input of

the docking station and another side to the

3.5mm audio output.

• switch to AUDIO IN.

• switch ATT to 0dB (switch to -8dB if the

sound volume is too high).

• connect one side of the supplied RCA

adapter to RCA output of the audio device,

and another side to the supplied 3.5mm

audio cable. Connect the remaining side of

the 3.5mm audio cable to the 3.5mm audio

input of the docking station.

• switch to AUDIO IN and ATT to -8dB.

• connect one side of the supplied optical

cable to optical output of the device, and

another side to the optical input of the

docking station.

• switch to OPTICAL IN.

• make sure that the audio device is set to

PCM (check the manual of your audio

device for information).

L

R

PCM

6 EN

2. Connect the power adapter

3. Adjust the volume

Adjust the volume of the audio device to get

the best sound quality (check the manual of

your audio device for information).

Install the supplied batteries

Your stethoscope comes with a high quality

rechargeable lithium-polymer battery to

maximize battery lifetime. Insert/remove the

Note

•

Over time the capacity of the battery will decrease.

You can order replacement batteries through

the Philips service centers or online stores at

www.shop.philips.com

The spare battery

The spare battery extends the operating time

Charge the stethoscope

Note

•

the supplied battery for 5 hours for optimum battery

capacity and lifetime.

• You can charge one stethoscope per each time.

• Normally, a full charge takes 2.5 hours.

1

Power on the docking station.

2

Place the stethoscope on the docking

station.

»

spare battery is inside the charging slot,

the orange charging LED of the spare

English

EN 7

4 Use your

stethoscope

Auto switch on/off

• The stethoscope is on automatically when

you wear it on your ears.

» The LED on the stethoscope will turn

white.

• The stethoscope is off automatically when

you take it off from your ears. This saves the

battery life.

Adjust the volume

If you turn the volume control button of the

stethoscope to the maximum level and the

sound volume is still low, you can adjust the

volume of your TV to improve the quality of

wireless sound transmission (check the manual

of your audio device for information).

Adjust the left/right balance

You can adjust the left/right balance to make

your both ears hear well (see 'Overview of the

stethoscope' on page 4).

Amplify the environmental

sound

You can press the microphone button to

turn off the sound of the TV and amplify the

environmental sound and conversations (see

'Overview of the stethoscope' on page 4).

Equalizer (EQ)

You can press the EQ button to select among

voice emphasis EQ 1, treble boost EQ 2, bass

boost EQ 3 or off to suit your personal sound

preference and give you the best sound quality

(see 'Overview of the stethoscope' on page 4).

Store and charge the

stethoscope

Place the stethoscope to the docking station

after use. This can prevent the earbuds from

pulling apart, which will keep the stethoscope

switching on.

8 EN

5 LED and sound

indication

LED indication

Description Status LED

Battery No charging Off

Charging Orange LED

Charged White

Docking

station

On White LED

Off Off

Charging Orange LED

Charged White

Connected to

the stethoscope

White

Searching White LED

Equalizer

(EQ)

On White

Off Off

Stethoscope Off Off

Wireless mode White

Ambient mode Orange

Connection lost White LED

Low battery level Orange LED

Sound indication

Status Sound signal

Low battery level 1 beep per minute

(for 4 minutes)

Battery goes out soon. 2 beeps

Reach max./min. volume

level.

1 beep

6 Care and

maintainence

Clean the stethoscope and

docking station

1

Make sure that the docking station is

disconnected from the power source.

2

Use a slightly wet cloth to clean the

product gently.

Clean the ear caps

1

Remove the ear caps carefully from the

stethoscope.

2

Clean the ear caps with warm soap water.

3

Dry the ear caps thoroughly.

Note

•

The ear caps need to be replaced for a regular

period of time. You can order replacement ear caps

through the Philips service centers or online stores at

www.shop.philips.com

English

EN 9

7 Accessories

Use only the original accessories. You can order

extra accessories through the Philips service

centers or online stores at

www.shop.philips.com for replacement.

Rechargeable lithium-polymer battery

Ear caps

8 Technical data

•

feet)

• Optical input/3.5mm input switch

• 2.4G RF solution

• Auto power on/off

• Attenuator on/off

• Extra slot for second battery charging

•

Equalizer (EQ) x 3

Battery

• Rechargeable lithium-polymer battery (3.7V

350 mAh)

Adapter

• YLJXC-050055

Weight and dimensions

•

216.1 x 158.9 x 21.5 mm (H x W x D)

•

42.0 x 120.0 x 95.0 mm (H x W x D)

Note

•

Frequency range: 2,406-2,472 MHz

Transmitter power: <9 dBm

10 EN

9 Notice

Declaration of conformity

Hereby, MMD Hong Kong Holding

Limited declares that this product is in

compliance with the essential

requirements and other relevant

provisions of Directive 2014/53/EC. You

www.p4c.philips.com.

Compliance with EMF

This product complies with all applicable

standards and regulations regarding exposure to

Disposal of your old product

and battery

Your product is designed and manufactured with

high quality materials and components, which

can be recycled and reused.

This symbol on a product means that the

product is covered by European Directive

2012/19/EU.

This symbol means that the product contains

batteries covered by European Directive

2013/56/EU which cannot be disposed of with

normal household waste.

Inform yourself about the local separate

collection system for electrical and electronic

products and batteries. Follow local rules and

never dispose of the product and batteries with

normal household waste. Correct disposal of old

products and batteries helps prevent negative

consequences for the environment and human

health.

Removing the disposable batteries

To remove the disposable batteries, see section

‘Install the supplied batteries’.

Environmental information

All unnecessary packaging has been omitted.

We have tried to make the packaging easy to

polystyrene foam (buffer) and polyethylene

(bags, protective foam sheet.)

Your system consists of materials which can

be recycled and reused if disassembled by

a specialized company. Please observe the

local regulations regarding the disposal of

packaging materials, exhausted batteries and old

equipment.

English

EN 11

10 Frequently asked

questions

I cannot hear any sound.

• Make sure that you connect the power

source and adapter correctly (see '1.

Connect the audio device' on page 5).

• Make sure that you adjust the volume to an

appropriate level.

• Make sure that the batteries are charged

and inserted properly to the battery

charging slot (see 'Install the supplied

batteries' on page 6).

• Make sure that the LED on the docking

station is white.

• Batteries are defective. Purchase new ones

• For audio devices with optical output, make

sure that the audio device is set to PCM

(check the manual of your audio device for

information).

The sound is distorted.

• The volume is too high. Turn down the

volume.

• The stethoscope is nearly out of range.

Move it closer to the docking station.

• The stethoscope receives interference from

the nearby electrical appliances. Move the

docking station away from them.

• The stethoscope is at a location with thick

walls. Move the docking station away from

them.

• Adjust the ATTsetting (see 'Overview of

the docking station' on page 4).

• Adjust the volume of the audio device.

When I move my head I hear interfering noise.

The interference can be caused by another

wireless device like Bluetooth, WiFi, router or 2.4

devices. Move the wireless device away.

The audio quality is poor.

• The stethoscope is out of range. Reduce

the distance between your stethoscope and

audio device, or remove obstacles between

them.

• Adjust the ATTsetting (see 'Overview of

the docking station' on page 4).

• Adjust the volume of the audio device.

I can hear the sound with one ear only.

Make sure that you have adjusted the left/right

balance (see 'Overview of the stethoscope' on

page 4).

50 meters (164 feet). Why is the actual range

shorter?

The operating range is limited by obstacles

like thick walls, doors or ceiling. Move the

stethoscope closer to the docking station.

For further support, visit

www.philips.com/support.

12 EN

Dansk

DA 13

Indholdsfortegnelse

1 Vigtige sikkerhedsinstruktioner 14

Høresikkerhed 14

Generelle oplysninger 14

2 Dit trådløse stetoskop 15

Hvad er der i kassen 15

Oversigt over stetoskopet 16

Oversigt over dockingstationen 16

3 Kom godt i gang 17

Tilslutning 17

Isæt de medfølgende batterier 18

Oplad stetoskopet 18

4 Brug af stetoskopet 19

Automatisk tænd/sluk 19

Juster lydstyrken 19

Juster balancen mellem venstre og

højre side 19

Forstærk den omgivende lyd 19

Equalizer (EQ) 19

Opbevaring og opladning af stetoskopet 19

5 LED- og lydindikator 20

LED-indikator 20

Lydindikator 20

6 Rengøring og vedligeholdelse 20

Rengør stetoskopet og

dockingstationen 20

Rens ørepropperne 20

7 Tilbehør 21

8 Tekniske data 21

9 Meddelelse 22

Overensstemmelseserkl æring 22

Overholdelse af EMF 22

Bortskaffelse af udtjente produkter og

batterier 22

10 Ofte stillede spørgsmål (FAQ) 23

Inhaltsangabe

14 DA

1 Vigtige sikker-

hedsinstruk-

tioner

Høresikkerhed

Fare

•

For at undgå høreskader skal du begrænse den tid,

hvor du bruger hovedtelefonerne ved høj lydstyrke

og indstille lydstyrken til et sikkert niveau. Jo højere

lydstyrke, desto kortere er den sikre lyttetid.

Sørg for, at følgende retningslinjer overholdes,

når du bruger headsettet.

• Lyt ved en fornuftig lydstyrke i kortere

tidsrum.

• Vær omhyggelig med ikke at justere

lydstyrken kontinuerligt opad, efterhånden

som din hørelse tilpasser sig lydniveauet.

• Undlad at skrue så højt op for lyden, at du

ikke kan høre, hvad der foregår omkring dig.

• Du bør være ekstra forsigtig eller slukke

midlertidigt i potentielt farlige situationer.

• Ekstremt lydtryk fra øre- og hovedtelefoner

kan forårsage hørenedsættelse.

• Brug af hovedtelefoner med begge ører

dækket under kørsel i bil kan ikke anbefales

og kan være ulovligt ved kørsel i nogle

områder.

• Af sikkerhedsmæssige grunde bør

distraktioner fra musik eller telefonopkald

andre potentielt farlige omgivelser.

Generelle oplysninger

Advarsel

•

For at undgå brand eller stød: Hold altid dette

produkt tørt. Udsæt det ikke for stærk varme fra

varmeapparater eller direkte sollys.

• Der må ikke placeres åben ild, som f.eks. tændte

stearinlys, i nærheden af apparatet.

• Undgå at nedsænke produktet i vand.

• For at rengøre produktet: Brug et let fugtigt vaskeskind.

Undgå at bruge rengøringsmidler, der indeholder

alkohol, sprit, ammoniak eller slibemidler, da de kan

beskadige produktet.

• Skil ikke produktet ad.

• Undgå at bruge eller opbevare produktet på et sted,

hvor temperaturen er under 0 °C (32 °F) eller over 40

°C (104 °F), da dette kan afkorte batterilevetiden.

• Produktet må ikke udsættes for dryp eller sprøjt.

• Strømstikket på AC/DC-adapteren bruges til at frakoble

produktet og skal derfor kunne betjenes nemt.

• Brug kun de medfølgende batterier.

• Andre typer genopladelige eller alkaline-batterier kan

ikke oplades med dette system.

• Batterier (installeret batteripakke eller batterier) må

ikke udsættes for ekstrem varme fra f.eks. sol, ild eller

lignende.

• Risiko for eksplosion! Opbevar ikke batterier i

nærheden af varmekilder, sollys eller ild. Kast aldrig

batterier i ild.

Dansk

DA 15

2 Dit trådløse

stetoskop

Hvad er der i kassen

*Philips trådløst stetoskop

Dockingstation

Strømadapter

3,5 mm lydkabel

Optisk kabel

RCA-adapter

*Genopladeligt litiumionpolymerbatteri

Ekstra ørepropper

Brugervejledning

Lynvejledning

16 DA

Oversigt over stetoskopet

1 Øreprop

2

Indikator for trådløs/omgivende tilstand

3

Knap til trådløs/omgivende tilstand

4 Styring af balance mellem venstre/højre

side

5 Batteri

6 Knap til lydstyrkekontrol

Oversigt over

dockingstationen

1 AUDIO IN

Lydindgang

2 AUDIO IN/OPTICAL IN-kontakt

3 Optisk indgang

4 ATT-kontakt (dæmpning af

lydindgangssignal)

5 POWER

Tænd eller sluk for dockingstationen.

6 Strømadapterstik

7 Batteri opladningsstik

8

Batteri opladningsindikator

9

Stetoskop opladningsindikator

10

Stetoskop opladningsstik

11

Equalizer (EQ) knap

12 Equalizer (EQ) indikatorer

EQ 1: Stemmeforstærkning

EQ 2: Diskantforstærkning

EQ 3: Basforstærkning

Dansk

DA 17

3 Kom godt i gang

Advarsel

•

Læs sikkerhedsinstruktionerne i afsnittet "Vigtige

sikkerhedsinstruktioner", før du tilslutter og installerer

stetoskopet.

Tilslutning

1. Tilslut lydenheden

Bemærk

•

Hvis TV'ets lydstyrke er utilstrækkelig, slukker

dockingstationen automatisk.

• Den strømførende dockingstation sender ikke noget

lydsignal under opladning.

• Du kan oplade ét stetoskop ad gangen.

Se følgende anvisninger for at tilslutte

lydenheden og justere ATT.

Til TV'er eller andre enheder med 3,5 mm

lydudgang:

• Slut den ene ende af det medfølgende 3,5

mm lydkabel til dockingstationens 3,5 mm

lydindgang og den anden ende til enhedens

3,5 mm lydudgang.

• Skift til AUDIO IN.

• Skift ATT til 0dB (skift til -8dB, hvis

lydstyrken er for høj).

Til TV'er eller andre enheder med RCA-udgang:

• Slut den ene ende af den medfølgende

RCA-adapter til lydenhedens RCA-udgang

og den anden ende til det medfølgende 3,5

mm lydkabel. Slut den resterende ende af

det 3,5 mm lydkabel til dockingstationens

3,5 mm lydindgang.

• Skift til AUDIO IN og ATT til -8dB.

Til TV'er eller andre enheder med optisk udgang:

• Slut den ene ende af det medfølgende

optiske kabel til enhedens optiske udgang

og den anden ende til dockingstationens

optiske indgang.

• Skift til OPTICAL IN.

• Kontroller, at lydenheden er indstillet til

PCM (se brugervejledningen til lydenheden

L

R

PCM

18 DA

2. Tilslut strømadapteren

3. Juster lydstyrken

Juster lydenhedens lydstyrke for at opnå den

bedste lydkvalitet (se brugervejledningen til

Isæt de medfølgende batterier

Det første batteri

Stetoskopet leveres med et genopladeligt

litiumionpolymerbatteri af høj kvalitet, der

maksimerer batterilevetiden. Isæt/fjern det første

batteri som følger:

Bemærk

•

Batteriets kapacitet aftager med tiden. Du kan

bestille nye batterier hos Philips-servicecentre eller i

onlinebutikker på www.shop.philips.com

Ekstra batteri

Det ekstra batteri forlænger driftstiden, når det

første batteri skal genoplades. Isæt det ekstra

batteri som følger:

Oplad stetoskopet

Bemærk

•

Før stetoskopet anvendes første gang, oplades det

medfølgende batteri i 5 timer for at opnå optimal

batterikapacitet og -levetid.

• Du kan oplade ét stetoskop ad gangen.

• En fuld opladning tager normalt 2,5 timer.

1

Tænd for dockingstationen.

2

Anbring stetoskopet på dockingstationen.

» Den orange LED-indikator for

opladning lyser. Hvis det ekstra batteri

er sat i opladningsstikket, vil det ekstra

batteris orange LED-indikator for

opladning også lyse.

Sivu latautuu ...

Philips TAE8005BK/10 Ohjekirja

Philips TAE8005BK/10 Ohjekirja

muilla kielillä

Liittyvät paperit

Muut asiakirjat