Parkside 270767 Operating Instructions Manual

CROSS LINE LASER PKLL 7 A1

CROSS LINE LASER

Operating instructions

KORSLINJELASER

Bruksanvisning

RISTILINJALASER

Käyttöohje

IAN 270767

KREUZLINIENLASER

Bedienungsanleitung

LASER KRZYZOWY

Instrukcja obsługi

GB / IE Operating instructions Page 1

FI Käyttöohje Sivu 15

SE Bruksanvisning Sidan 29

PL Instrukcja obsługi Strona 43

DE / AT / CH Bedienungsanleitung Seite 57

Before reading, unfold the page containing the illustrations and familiarise

yourself with all functions of the device.

Käännä ennen lukemista kuvallinen sivu esiin ja tutustu seuraavaksi laitteen

kaikkiin toimintoihin.

Vik ut bildsidan och ha den till hands när du läser igenom anvisningarna och

gör dig bekant med apparatens / maskinens funktioner.

Przed przeczytaniem proszę rozłożyć stronę z ilustracjami, a następnie

proszę zapoznać się z wszystkimi funkcjami urządzenia.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen

Sie sich anschließend mit allen Funktionen des Gerätes vertraut.

1

PKLL 7 A1

GB

IE

Contents

Introduction ...................................2

Intended use ...........................................2

Description of components ................................3

Package contents .......................................3

Technical data .........................................4

Safety instructions ..............................5

Risk of injury if batteries are handled incorrectly ...............7

Operation ....................................8

Inserting/replacing the batteries ...........................8

Switching on and oﬀ ....................................8

Automatic levelling ......................................9

Working without automatic levelling ........................9

Working procedures ....................................10

Working with the clamp .................................10

Working with a tripod ..................................10

Maintenance and cleaning ......................11

Storage .....................................12

Disposal .....................................12

Disposal of the appliance ................................12

Disposing of the batteries ................................12

Warranty ....................................13

Service ......................................14

Importer .....................................14

GB

IE

2

PKLL 7 A1

CROSS LINE LASER PKLL 7 A1

Introduction

Congratulations on the purchase of your new appliance.

You have selected a high-quality product. The operating

instructions are part of this product. They contain important

information on safety, usage and disposal. Before using the product,

familiarise yourself with all operating and safety instructions. Use the

product only as described and for the speciﬁed areas of application.

Please also pass on these operating instructions to any future owner.

Intended use

This measuring tool is intended for determining and checking horizontal

and vertical lines.

This appliance is intended exclusively for operation in enclosed

rooms.

Any other usage of or modiﬁcation to the appliance is deemed to be

improper and carries a signiﬁcant risk of accidents.

The manufacturer accepts no responsibility for damage(s) attributable

to misuse.

The appliance is not intended for commercial use.

3

PKLL 7 A1

GB

IE

Description of components

LED levelling

Red: levelling oﬀ

Green: levelling on

ON/OFF switch / transport lock

Battery compartment (rear)

1/4” tripod thread (bottom)

Laser aperture

1/4” screw

Locking screw

Clamp

Fixing screw

Package contents

The appliance is supplied with the following components as standard:

Cross line laser

Clamp

2 x 1.5 V AA batteries

Operating instructions

WARNING!

■ Do not allow children to play with packaging materials.

There is a risk of suﬀocation.

NOTE

► Check the package for completeness and for signs of visible

damage.

► If the delivery is incomplete or damage has occurred as a result

of defective packaging or during transport, contact the Service

hotline (see chapter entitled Service).

GB

IE

4

PKLL 7 A1

Technical data

Minimum working range

1)

: 7 m

Levelling precision: at 0° : ± 0.8 mm/m

at ± 4° : ± 1.0 mm/m

Self-levelling range (typical): ± 4°

Levelling time (typical): approx. 6 seconds

Operating temperature: +5°C to 35°C

Relative humidity max.: ≤ 90%

Laser category: 2

Wavelength (λ): 637 nm

Maximum power P max: < 1 mW

Tripod adapter: 1/4"

Batteries: 2 x 1.5 V

AA batteries

Weight (appliance): 220 g

Dimensions (appliance): approx. 85 x 65 x 65cm

1) The working range can be reduced due to unfavourable environ-

mental conditions (e.g. direct sunlight).

5

PKLL 7 A1

GB

IE

Safety instructions

■ Do not work with the measuring tool in areas subject to the

risk of explosions, or in areas where ﬂammable liquids, gases

or dusts are located. The appliance can create sparks which

may ignite dust or fumes.

■ This appliance may be used by children of the age of 8 years or

more and by persons with reduced physical, sensory or mental

capabilities or lack of experience and/or knowledge if they are

being supervised or have been instructed with regard to the safe

use of the appliance and have understood the potential risks.

Children must not use the appliance as a plaything. Cleaning and

user maintenance should not be performed by children unless

they are under supervision.

■ Do not leave the appliance unattended when switched on, and

switch the appliance oﬀ directly after use. Other people could be

blinded by the laser beam. Risk of eye injuries!

■ Protect the appliance from wetness or direct sunlight.

■ Do not expose the appliance to any extremes of temperature

or temperature ﬂuctuations. For example, do not leave it lying in

a car for extended periods. After exposure to large temperature

ﬂuctuations, allow the appliance to acclimatise before using it

again. The precision of the appliance can be adversely aﬀected

by extreme temperatures or temperature ﬂuctuations.

■ Avoid hefty knocks or dropping the measuring tool. Damage to

the measuring tool may aﬀect its accuracy. After a violent impact

or fall, compare the laser line with a known horizontal or vertical

reference line.

■ Switch the appliance oﬀ before transporting it. When switched

oﬀ, the pendulum unit is locked as it could otherwise be damaged

by strong movements.

GB

IE

6

PKLL 7 A1

■ Do not use the appliance near cardiac pacemakers. The inside

of the measuring tool creates a ﬁeld that could impair the func-

tioning of a cardiac pacemaker.

■ Keep the measuring tool away from magnetic data media and

magnetically sensitive devices. The eﬀect of the magnet may

cause irreversible data loss.

WARNING! Protect yourself from laser radiation!

■ Never look directly into the laser beam or into the laser aperture

.

WARNING!

► Looking at a laser beam through optical instruments (e.g.

magnifying glasses or similar) can cause eye injuries.

► Caution! If operating and adjustment equipment is used or

procedures other than those speciﬁed here are carried out,

this may result in hazardous radiation exposure.

■ Never aim the laser beam at reﬂective surfaces, people or animals.

Even brief visual contact with a laser beam can result in eye

injuries.

7

PKLL 7 A1

GB

IE

Risk of injury if batteries are handled incorrectly

■ Keep batteries out of the reach of children. Children might put

batteries into their mouth and swallow them. If a battery has been

swallowed, seek medical assistance immediately.

■ Do not throw batteries into a ﬁre. Never subject batteries to high

temperatures.

■ Risk of explosion! Do not charge batteries unless they are explicitly

labelled as "rechargeable".

■ Do not open the batteries or short-circuit them.

■ Do not mix diﬀerent types of batteries.

Due to increased risk of leakage, empty batteries should be re-

moved. The batteries should also be removed from the appliance

if it is not being used for long periods.

■ Battery acid leaking from a battery can cause skin irritation. In

the event of contact with the skin, rinse with plenty of water. If the

liquid comes into contact with your eyes, rinse thoroughly with

water, do not rub and consult a doctor immediately.

■ The chapter entitled Inserting/replacing the batteries describes

how to correctly insert and remove batteries.

GB

IE

8

PKLL 7 A1

Operation

Inserting/replacing the batteries

♦ Open the battery compartment .

♦

Insert the batteries. Ensure correct polarity as shown on the

diagram inside the battery compartment.

♦

Close the battery compartment

.

NOTE

► With a low battery level, the LED

ﬂashes red.

Always replace all batteries together. Only use batteries

from one manufacturer and with the same capacity.

► If you do not intend to use the appliance for a long time,

remove the batteries. During extended periods of storage,

the batteries can corrode and discharge themselves.

Switching on and oﬀ

♦ To turn on the appliance, move the ON/OFF switch into the

position. Immediately after switching on, the appliance emits

two laser lines from the laser aperture .

♦ To turn on the appliance, move the ON/OFF switch

into the

position. The pendulum unit is locked when the appliance

is switched oﬀ.

9

PKLL 7 A1

GB

IE

Automatic levelling

■ Place the appliance on a ﬁrm horizontal surface to work with auto-

matic levelling or fasten it onto a tripod via the 1/4” thread

.

■ After switching on, the automatic levelling system automatically

compensates for irregularities within the self-levelling range of

± 4°. Levelling is complete as soon as the laser lines no longer

move and the LED

lights up green.

■ If automatic levelling is not possible, e.g. because the underside

of the measuring tool is oﬀ the horizontal by more than 4° or be-

cause you are holding the appliance in your hand, then the LED

will light up red and the appliance will work without automatic

levelling. The laser lines will remain lit and ﬂash, but the two

crossed lines will not necessarily run at right angles to each other.

NOTE

► When you are working without automatic levelling, this is

always indicated by the red LED

.

► After vibrations or position changes during operation, the

appliance will always automatically re-level itself. To avoid

errors, always check the position of the horizontal and/or

vertical laser line in relation to reference points after re-

levelling.

Working without automatic levelling

♦ Move the ON/OFF switch into the position.

♦ Press the

button for LED levelling. Immediately after switching

on, the appliance emits two laser lines from the laser aperture

which are not levelled. When you are working without automatic

levelling, this is always indicated by the red LED .

GB

IE

10

PKLL 7 A1

Working procedures

■ Use only the centre of the laser line to make your marking.

The width of the laser line changes with the distance.

Working with the clamp

With the help of the clamp you can attach the measuring tool to

various items, e.g. vertical or horizontal boards or pipes.

♦ Undo the ﬁxing screw

.

♦ Position the clamp

in the desired location and then retighten

the ﬁxing screw .

♦ Now place the appliance with the tripod thread

on the

screw and screw it tight with moderate force. Do not over-

tighten the appliance as it could be damaged.

♦ Align the clamp to roughly the position you require before you

switch on the appliance.

♦ To do this, undo the locking screw

and move the appliance

to a horizontal position at the desired height.

♦ Retighten the locking screw

.

Working with a tripod

A tripod oﬀers a stable, height-adjustable support for taking measure-

ments.

♦ Place the measuring tool with the tripod thread

on the 1/4”

screw of the tripod.

11

PKLL 7 A1

GB

IE

Maintenance and cleaning

■ The appliance is maintenance-free.

CAUTION!

■ NEVER submerse the appliance in water or other liquids.

Do not allow any moisture to penetrate into the appliance

during cleaning.

■ Keep the appliance the appliance clean to ensure fault-free

operation.

■ Use a soft, dry cloth to clean the housing.

■ Clean the laser aperture

using a gentle air stream. In the event

of more serious contamination, remove the dirt with a damp cotton

swab. Do not exert any strong pressure!

WARNING!

■ The appliance should only be opened for repairs by a

qualiﬁed technician.

■ Have your measuring tool serviced by a qualiﬁed technician

using only identical replacement parts. This will ensure that

the safety of the measuring tool is maintained.

GB

IE

12

PKLL 7 A1

Storage

If you decide not to use the appliance for a long period, remove

the batteries and store them in a clean, dry place away from direct

sunlight.

Disposal

Disposal of the appliance

The packaging is made from environmentally friendly

material and can be disposed of at your local recycling

plant.

Do not dispose of power tools in your normal

household waste!

European Directive 2012/19/EU requires that worn-out power tools

be collected separately and recycled in an environmentally compatible

manner.

Your local community or municipal authorities can provide informa-

tion on how to dispose of the worn-out appliance.

Disposing of the batteries

Do not dispose of the batteries in the domestic waste. Every

consumer is legally obliged to dispose of batteries at a

collection site of his community/city district or at a retail

store. This obligation is intended to ensure that batteries are disposed

of in an environmentally responsible manner. Dispose of batteries

only when they are fully discharged.

13

PKLL 7 A1

GB

IE

Warranty

This appliance is provided with a 3-year warranty valid from the

date of purchase. The appliance has been manufactured with care

and inspected meticulously prior to delivery.

Please retain your receipt as proof of purchase. In the event of a war-

ranty claim, please contact your Customer Service unit by telephone.

This is the only way to guarantee free return of your goods.

NOTE

► The warranty only covers claims for material and manufacturing

defects, not for transport damage, worn parts or damage to

fragile components such as buttons or rechargeable batteries.

This appliance is intended solely for private use and not for commercial

purposes. The warranty shall be deemed void in cases of misuse or

improper handling, use of force and modiﬁcations/repairs which

have not been carried out by one of our authorised Service centres.

Your statutory rights are not restricted by this warranty. The warranty

period is not prolonged by repairs eﬀected under the warranty. This

also applies to replaced and repaired components.

Any damage and defects present at the time of purchase must be

reported immediately after unpacking, but no later than two days

after the date of purchase.

Repairs carried out after expiry of the warranty period shall be

subject to charge.

GB

IE

14

PKLL 7 A1

Service

Service Great Britain

Tel.: 0871 5000 720 (£ 0.10/Min.)

E-Mail: k[email protected]

IAN 270767

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (oﬀ peak))

E-Mail: k[email protected]

IAN 270767

Importer

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

15

PKLL 7 A1

FI

Sisällysluettelo

Johdanto ....................................16

Määräystenmukainen käyttö .............................16

Osat ................................................17

Toimitussisältö .........................................17

Tekniset tiedot .........................................18

Turvallisuusohjeet .............................19

Paristojen vääränlaiseen käsittelyyn liittyvä tapaturmavaara .....21

Käyttöönotto .................................22

Paristojen paikoilleen asettaminen ja vaihtaminen .............22

Päälle ja pois päältä kytkeminen ..........................22

Tasausautomatiikka ....................................23

Työskentely ilman tasausautomatiikkaa .....................23

Työskentelyohjeet ......................................24

Puristimen käyttäminen ..................................24

Työskentely jalustan kanssa ..............................24

Huolto ja puhdistus ............................25

Varastointi ...................................26

Hävittäminen .................................26

Laitteen hävittäminen ...................................26

Paristojen hävittäminen ..................................26

Takuu .......................................27

Huolto. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Maahantuoja .................................28

FI

16

PKLL 7 A1

RISTILINJALASER PKLL 7 A1

Johdanto

Onnittelut uuden laitteen hankinnasta. Olet valinnut laaduk-

kaan tuotteen. Käyttöohje on osa tätä tuotetta. Se sisältää

turvallisuutta, käyttöä ja hävittämistä koskevia tärkeitä ohjei-

ta. Tutustu ennen tuotteen käyttöä kaikkiin käyttö- ja turvallisuusohjei-

siin. Käytä tuotetta vain kuvatulla tavalla ja vain mainittuihin käyttö-

tarkoituksiin. Kun luovutat tuotteen eteenpäin, liitä mukaan kaikki

tuotetta koskevat asiakirjat.

Määräystenmukainen käyttö

Mittauslaite on tarkoitettu vaaka- ja pystysuorien linjojen mittaamiseen

ja tarkistamiseen.

Laite on tarkoitettu käytettäväksi ainoastaan sisätiloissa.

Laitteen muu käyttö tai muuttaminen on määräystenvastaista, ja siihen

liittyy huomattava tapaturmariski.

Valmistaja ei ota mitään vastuuta määräystenvastaisesta käytöstä

aiheutuneista vahingoista.

Laitetta ei ole tarkoitettu kaupalliseen käyttöön.

17

PKLL 7 A1

FI

Osat

LED-tasaus

punainen: Tasaus pois päältä

vihreä: Tasaus päällä

Virtakytkin / kuljetusvarmistin

Paristokotelo (takapuoli)

Jalustan 1/4″ kiinnityskierre (alaosa)

Laserin ulostuloaukko

1/4″ ruuvi

Lukitusruuvi

Puristin

Kiinnitysruuvi

Toimitussisältö

Toimitus sisältää vakiona seuraavat osat:

Ristilinjalaser

Puristin

2 x 1,5 V:n AA-paristoa

Käyttöohje

VAROITUS!

■ Pakkausmateriaaleilla ei saa leikkiä.

On olemassa tukehtumisvaara.

OHJE

► Tarkista, ettei toimituksesta puutu osia eikä tuotteessa ole

näkyviä vaurioita.

► Jos havaitset toimituksessa puutteita tai vaurioita, jotka johtuvat

puutteellisesta pakkauksesta tai ovat syntyneet kuljetuksen

aikana, soita huollon palvelunumeroon (ks. kohta Huolto).

Sivu latautuu ...

Parkside 270767 Operating Instructions Manual

Tämä käsikirja sopii myös

Parkside 270767 Operating Instructions Manual

muilla kielillä

Muut asiakirjat