Simplicity VICTA RIDING MOWERS CE (EVT175460, EVT20460) Ohjekirja

1752022

Revision -

en

Operator’s Manual

Bedienungsanleitung

de

Manuel d’utilisation

fi

fr

Käyttöohje

da

Betjeningsvejledning

et

Kasutajajuhend

Vartotojo vadovas

lt

Instrukcja obsługi

nl

pl

Gebruikershandleiding

it

Manuale dell’operatore

lv

Operātora rokasgrāmatā

Trac tors

Mfg. No. Description

2690961 EVT175460, 17.5HP, Mower Deck 117 cm (46”) (CE)

2690963 EVT20460, 20HP, Mower Deck 117 cm (46”) (CE)

Mower Deck

Mfg. No. Description

1695982 Mower Deck 117 cm (46”) (CE)

Not for

Reproduction

2

Not for

Reproduction

Maintenance ......................................................18

Maintenance Chart................................................18

Check Tire Pressure..............................................18

Check Mower Blade Stopping Time ......................19

Clean the Battery and Cables................................19

Engine Maintenance..............................................19

Seat Adjustment....................................................20

Battery Charging ...................................................20

Gauge Wheels ......................................................20

Troubleshooting ................................................21

Troubleshooting the Tractor ..................................21

Troubleshooting the Mower...................................22

Specifications....................................................23

Parts & Accessories..........................................23

Warranty.............................................................24

Operator Safety ...................................................4

Features & Controls..........................................12

Control Functions ..................................................12

Parking Brake Function .........................................14

Cruise Control Operation.......................................14

Hourmeter .............................................................14

Operation ...........................................................15

Safety Interlock System Tests ...............................15

Adding Fuel...........................................................15

Starting the Engine (Choke-A-Matic).....................15

Stopping the Tractor & Engine...............................16

Driving the Tractor.................................................16

Mowing..................................................................16

Mowing in Reverse................................................16

Attachment Operation in Reverse .........................16

Pushing the Tractor by Hand.................................16

Adjusting Mower Cutting Height ............................17

Attaching a Trailer .................................................17

Storage..................................................................17

Table of Contents

3

en

Not for

Reproduction

4

Operator Safety

Operating Safety

Congratulations on purchasing a superior-quality piece of lawn and

garden equipment. Our products are designed and manufactured to

meet or exceed all industry standards for safety.

Power equipment is only as safe as the operator. If it is misused, or

not properly maintained, it can be dangerous! Remember, you are

responsible for your safety and that of those around you.

Use common sense, and think through what you are doing. If you

are not sure that the task you are about to perform can be safely

done with the equipment you have chosen, ask a

professional: contact your local authorized dealer.

Read the Manual

The operator’s manual contains important safety information you need to be aware of

BEFORE you operate your unit as well as DURING operation.

Safe operating techniques, an explanation of the product’s features and

controls, and maintenance information is included to help you get the most

out of your equipment investment.

Be sure to completely read the Safety Rules and Information found on

the following pages. Also completely read the Operation section.

Children

Tragic accidents can occur with children. Do not allow them

anywhere near the area of operation. Children are often

attracted to the unit and mowing activity. Never assume that

children will remain where you last saw them. If there is a

risk that children may enter the area where you are mowing,

have another responsible adult watch them.

DO NOT GIVE CHILDREN RIDES ON THIS UNIT! This

encourages them to come near the unit in the future while it

is running, and they could be seriously hurt. They may then

approach the unit for a ride when you are not expecting it,

and you may run over them.

Reverse

Do not mow in reverse unless

absolutely necessary. Always look

down and behind before and while

traveling in reverse even

with the mower blades

disengaged.

Not for

Reproduction

5

Slope Operation

You could be seriously injured or even killed if you use this unit on too

steep an incline. Using the unit on a slope that is too steep or where you

don’t have adequate traction can cause you to lose control or roll over.

A good rule of thumb is to not operate on any slope you cannot back up

(in 2-wheel drive mode). You should not operate on inclines with a slope

greater than a 3.5 foot rise over a 20 foot length. Always drive up and

down slopes: never cross the face.

Also note that the surface you are driving on can greatly impact stability

and control. Wet grass or icy pavement can seriously affect your ability

to control the unit.

If you feel unsure about operating the unit on an incline, don’t do it. It’s

not worth the risk.

Moving Parts

This equipment has many moving parts that can injure you or someone else.

However, if you are seated in the seat properly, and follow all the rules in this book,

the unit is safe to operate.

The mower deck has spinning mower blades that can amputate hands and feet.

Do not allow anyone near the equipment while it is running!

To help you, the operator, use this equipment safely, it is equipped with an

operator-present safety system. Do NOT attempt to alter or bypass the system.

See your dealer immediately if the system does not pass all the safety interlock

system tests found in this manual.

Thrown Objects

This unit has spinning mower blades. These blades can pick up and throw

debris that could seriously injure a bystander. Be sure to clean up the area to

be mowed BEFORE you start mowing.

Do not operate this unit without the entire grass catcher or discharge guard

(deflector) in place.

Also, do not allow anyone in the area while the unit is running! If someone

does enter the area, shut the unit off immediately until they leave.

Fuel and Maintenance

Gasoline is extremely flammable. Its vapors are also extremely flammable

and can travel to distant ignition sources. Gasoline must only be used as a

fuel, not as a solvent or cleaner. It should never be stored any place where

its vapors can build up or travel to an ignition source like a pilot light. Fuel

belongs in an approved, plastic, sealed gas can, or in the tractor fuel tank

with the cap securely closed. Spilled fuel needs to be cleaned up

immediately.

Proper maintenance is critical to the safety and performance of your unit. Be

sure to perform the maintenance procedures listed in this manual, especially

periodically testing the safety system.

en

Not for

Reproduction

6

GENERAL OPERATION

1. Read, understand, and follow all instructions in the

manual and on the unit before starting.

2. Do not put hands or feet near rotating parts or under

the machine. Keep clear of the discharge opening at

all times.

3. Only allow responsible adults, who are familiar with

the instructions, to operate the unit (local regulations

can restrict operator age).

4. Clear the area of objects such as rocks, toys, wire,

etc., which could be picked up and thrown by the

blade(s).

5. Be sure the area is clear of other people before

mowing. Stop the unit if anyone enters the area.

6. Never carry passengers.

7. Do not mow in reverse unless absolutely necessary.

Always look down and behind before and while

travelling in reverse.

8. Never direct discharge material toward anyone. Avoid

discharging material against a wall or obstruction.

Material may ricochet back toward the operator. Stop

the blade(s) when crossing gravel surfaces.

9. Do not operate the machine without the entire grass

catcher, discharge guard (deflector), or other safety

devices in place.

10. Slow down before turning.

11. Never leave a running unit unattended. Always

disengage the PTO, set parking brake, stop engine,

and remove keys before dismounting.

12. Disengage blades (PTO) when not mowing. Shut off

engine and wait for all parts to come to a complete

stop before cleaning the machine, removing the grass

catcher, or unclogging the discharge guard.

13. Operate the machine only in daylight or good artificial

light.

14. Do not operate the unit while under the influence of

alcohol or drugs.

15 Watch for traffic when operating near or crossing

roadways.

16. Use extra care when loading or unloading the unit into

a trailer or truck.

17. Always wear eye protection when operating this unit.

18. Data indicates that operators, age 60 years and

above, are involved in a large percentage of power

equipment-related injuries. These operators should

evaluate their ability to operate the equipment safely

enough to protect themselves and others from injury.

19. Follow the manufacturer’s recommendations for wheel

weights or counterweights.

20. Keep in mind the operator is responsible for accidents

occurring to other people or property.

21. All drivers should seek and obtain professional and

practical instruction.

22. Always wear substantial footwear and trousers. Never

operate when barefoot or wearing sandals.

23. Before using, always visually check that the blades

and blade hardware are present, intact, and secure.

Replace worn or damaged parts.

24. Disengage attachments before: refueling, removing an

attachment, making adjustments (unless the

adjustment can be made from the operator’s position).

25. When the machine is parked, stored, or left

unattended, lower the cutting means unless a positive

mechanical lock is used.

26. Before leaving the operator’s position for any reason,

engage the parking brake (if equipped), disengage the

PTO, stop the engine, and remove the key.

27. To reduce fire hazard, keep the unit free of grass,

leaves, & excess oil. Do not stop or park over dry

leaves, grass, or combustible materials.

Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control

of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment.

This mowing deck is capable of amputating hands and feet and throwing objects.

The triangle in text signifies important cautions or warnings which must be followed.

TRANSPORTING AND STORAGE

1. When transporting the unit on an open trailer, make

sure it is facing forward, in the direction of travel. If

the unit is facing backwards, wind lift could damage

the unit.

2. Always observe safe refueling and fuel handling

practices when refueling the unit after transportation

or storage.

3. Never store the unit (with fuel) in an enclosed poorly

ventilated structure. Fuel vapors can travel to an

ignition source (such as a furnace, water heater, etc.)

and cause an explosion. Fuel vapor is also toxic to

humans and animals.

4. Always follow the engine manual instructions for

storage preparations before storing the unit for both

short and long term periods.

5. Always follow the engine manual instructions for

proper start-up procedures when returning the unit to

service.

6. Never store the unit or fuel container inside where

there is an open flame or pilot light, such as in a water

heater. Allow unit to cool before storing.

Not for

Reproduction

7

CHILDREN

Tragic accidents can occur if the operator is not alert to the

presence of children. Children are often attracted to the unit

and the mowing activity. Never assume that children will

remain where you last saw them.

1. Keep children out of the mowing area and under the

watchful care of another responsible adult.

2. Be alert and turn unit off if children enter the area.

3. Before and during reverse operation, look behind and

down for small children.

4. Never carry children, even with the blade(s) off. They

may fall off and be seriously injured or interfere with

safe unit operation. Children who have been given

rides in the past may suddenly appear in the mowing

area for another ride and be run over or backed over

by the machine.

5. Never allow children to operate the unit.

6. Use extra care when approaching blind corners,

shrubs, trees, or other objects that may obscure

vision.

EMISSIONS

1. Engine exhaust from this product contains chemicals

known, in certain quantities, to cause cancer, birth

defects, or other reproductive harm.

2. Look for the relevant Emissions Durability Period and

Air Index information on the engine emissions label.

IGNITION SYSTEM

1. This spark ignition system complies with Canadian

ICES-002.

SLOPE OPERATION

Slopes are a major factor related to loss-of-control and tip-

over accidents, which can result in severe injury or death.

Operation on all slopes requires extra caution. If you cannot

back up the slope or if you feel uneasy on it, do not operate

on it.

Control of a walk-behind or ride-on machine sliding on a

slope will not be regained by the application of the brake.

The main reasons for loss of control are: insufficient tire grip

on the ground, speed too fast, inadequate braking, the type

of machine is unsuitable for its task, lack of awareness of

the ground conditions, incorrect hitching and load

distribution.

1. Mow up and down slopes, not across.

2. Watch for holes, ruts, or bumps. Uneven terrain could

overturn the unit. Tall grass can hide obstacles.

3. Choose a slow speed so that you will not have to stop

or change speeds while on the slope.

4. Do not mow on wet grass. Tires may loose traction.

5. Always keep unit in gear especially when traveling

down slopes. Do not shift to neutral and coast

downhill.

6. Avoid starting, stopping, or turning on a slope. If tires

lose traction, disengage the blade(s) and proceed

slowly straight down the slope.

7. Keep all movement on slopes slow and gradual. Do

not make sudden changes in speed or direction,

which could cause the machine to rollover.

8. Use extra care while operating machines with grass

catchers or other attachments; they can affect the

stability of the unit. Do not use on steep slopes.

9. Do not try to stabilize the machine by putting your foot

on the ground (ride-on units).

10. Do not mow near drop-offs, ditches, or embankments.

The mower could suddenly turn over if a wheel is over

the edge of a cliff or ditch, or if an edge caves in.

11. Do not use grass catchers on steep slopes.

12. Do not mow slopes you cannot back up them.

13. See your authorized dealer/retailer for

recommendations of wheel weights or counterweights

to improve stability.

14. Remove obstacles such as rocks, tree limbs, etc.

15. Use slow speed. Tires may lose traction on slopes

even through the brakes are functioning properly.

16. Do not turn on slopes unless necessary, and then,

turn slowly and gradually downhill, if possible.

TOWED EQUIPMENT (RIDE-ON UNITS)

1. Tow only with a machine that has a hitch designed for

towing. Do not attach towed equipment except at the

hitch point.

2. Follow the manufacturer’s recommendations for

weight limit for towed equipment and towing on

slopes.

3. Never allow children or others in or on towed

equipment.

4. On slopes, the weight of the towed equipment may

cause loss of traction and loss of control.

5. Travel slowly and allow extra distance to stop.

6. Do not shift to neutral and coast down hill.

WARNING

Never operate on slopes greater than 17.6 percent

(10°) which is a rise of 3-1/2 feet (106 cm) vertically in

20 feet (607 cm) horizontally.

When operating on slopes use additional wheel

weights or counterweights. See your dealer/retailer

to determine which weights are available and

appropriate for your unit.

Select slow ground speed before driving onto slope.

In addition to front weights, use extra caution when

operating on slopes with rear-mounted grass

catchers.

Mow UP and DOWN the slope, never across the

face, use caution when changing directions and DO

NOT START OR STOP ON SLOPE.

en

Not for

Reproduction

8

SERVICE AND MAINTENANCE

Safe Handling of Gasoline

1. Extinguish all cigarettes, cigars, pipes, and other

sources of ignition.

2. Use only approved gasoline containers.

3. Never remove the gas cap or add fuel with the engine

running. Allow the engine to cool before refueling.

4. Never fuel the machine indoors.

5. Never store the machine or fuel container where there

is an open flame, spark, or pilot light such as near a

water heater or other appliance.

6. Never fill containers inside a vehicle or on a truck bed

with a plastic bed liner. Always place containers on

the ground away from your vehicle before filling.

7. Remove gas-powered equipment from the truck or

trailer and refuel it on the ground. If this is not

possible, then refuel such equipment on a trailer with a

portable container, rather than from a gasoline

dispenser nozzle.

8. Keep nozzle in contact with the rim of the fuel tank or

container opening at all times until fueling is complete.

Do not use a nozzle lock-open device.

9. If fuel is spilled on clothing, change clothing

immediately.

10. Never over-fill the fuel tank. Replace gas cap and

tighten securely.

11. Use extra care in handling gasoline and other fuels.

They are flammable and vapors are explosive.

12. If fuel is spilled, do not attempt to start the engine but

move the machine away from the area of spillage and

avoid creating any source of ignition until fuel vapors

have dissipated.

13. Replace all fuel tank caps and fuel container caps

securely.

Service & Maintenance

1. Never run the unit in an enclosed area where carbon

monoxide fumes may collect.

2. Keep nuts and bolts, especially blade attachment

bolts, tight and keep equipment in good condition.

3. Never tamper with safety devices. Check their proper

operation regularly and make necessary repairs if they

are not functioning properly.

4. Keep unit free of grass, leaves, or other debris build-

up. Clean up oil or fuel spillage. and remove any fuel-

soaked debris. Allow machine to cool before storage.

5. If you strike an object, stop and inspect the machine.

Repair, if necessary, before restarting.

6. Never make adjustments or repairs with the engine

running.

7. Check grass catcher components and the discharge

guard frequently and replace with manufacturer’s

recommended parts, when necessary.

8. Mower blades are sharp. Wrap the blade or wear

gloves, and use extra caution when servicing them.

9. Check brake operation frequently. Adjust and service

as required.

10. Maintain or replace safety and instructions labels, as

necessary.

11. Do not remove the fuel filter when the engine is hot as

spilled gasoline may ignite. Do not spread fuel line

clamps further than necessary. Ensure clamps grip

hoses firmly over the filter after installation.

12. Do not use gasoline containing METHANOL, gasohol

containing more than 10% ETHANOL, gasoline

additives, or white gas because engine/fuel system

damage could result.

13. If the fuel tank must be drained, it should be drained

outdoors.

14. Replace faulty silencers/mufflers.

15. Use only factory authorized replacement parts when

making repairs.

16. Always comply with factory specifications on all

settings and adjustments.

17. Only authorized service locations should be utilized for

major service and repair requirements.

18. Never attempt to make major repairs on this unit

unless you have been properly trained. Improper

service procedures can result in hazardous operation,

equipment damage and voiding of manufacturer’s

warranty.

19. On multiple blade mowers, take care as rotating one

blade can cause other blades to rotate.

20. Do not change engine governor settings or over-

speed the engine. Operating the engine at excessive

speed can increase the hazard of personal injury.

21. Disengage drive attachments, stop the engine,

remove the key, and disconnect the spark plug wire(s)

before: clearing attachment blockages and chutes,

performing service work, striking an object, or if the

unit vibrates abnormally. After striking an object,

inspect the machine for damage and make repairs

before restarting and operating the equipment.

22. Never place hands near the moving parts, such as a

hydro pump cooling fan, when the tractor is running.

(Hydro pump cooling fans are typically located on top

of the transaxle).

23. Units with hydraulic pumps, hoses, or motors:

WARNING: Hydraulic fluid escaping under pressure

may have sufficient force to penetrate skin and cause

serious injury. If foreign fluid is injected into the skin it

must be surgically removed within a few hours by a

doctor familiar with this form of injury or gangrene may

result. Keep body and hands away from pin holes or

nozzles that eject hydraulic fluid under high pressure.

Use paper or cardboard, and not hands, to search for

leaks. Make sure all hydraulic fluid connections are

tight and all hydraulic hoses and lines are in good

condition before applying pressure to the system. If

leaks occur, have the unit serviced immediately by

your authorized dealer.

24. WARNING: Stored energy device. Improper release

of springs can result in serious personal injury.

Springs should be removed by an authorized

technician.

25. Models equipped with an engine radiator: WARNING:

Stored energy device. To prevent serious bodily injury

from hot coolant or steam blow-out, never attempt to

remove the radiator cap while the engine is running.

Stop the engine and wait until it is cool. Even then,

use extreme care when removing the cap.

Not for

Reproduction

9

Record your model name/number, manufacturer’s

identification numbers, and engine serial numbers in the

space provided for easy access. These numbers can be

found in the locations shown.

When contacting your authorized dealer for

replacement parts, service, or information you MUST

have these numbers.

ENGINE REFERENCE DATA

Model Description Name/Number

Unit Mfg Number

PRODUCT REFERENCE DATA

Unit Serial Number

Dealer Name

Date Purchased

Engine Make

Engine Type/Spec

Engine Model

Engine Code/Serial Number

Mower Deck Mfg Number

Mower Deck Serial Number

A. Manufacturer’s Identification Number

B. Manufacturer’s Serial Number

C. Manufacturer’s Name and Address

D. Maximum Engine Speed in Rotations per Minute

E. Power Rating in Kilowatts

F. Mass of Unit in Kilograms

G. CE Compliance Logo

H. Year of Manufacture

I. Guaranteed Sound Power in Decibels

CE Identification Tag

C

B

A

D

E

F

G

H

I

MODEL NO. xxxxxxx

SERIAL NO. xxxxxxxxxx

20xx

x.x kW

xxxx min

-1

xxx

dB

xxx kg

XXXXXXXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXX

Product Reference Data

en

Not for

Reproduction

10

Safety Decals

All DANGER, WARNING, CAUTION and instructional

messages on your rider and mower should be carefully

read and obeyed. Personal bodily injury can result when

these instructions are not followed. The information is for

your safety and it is important! The safety decals below

are on your rider and mower.

If any of these decals are lost or damaged, replace them

at once. See your local dealer for replacements.

These labels are easily applied and will act as a constant

visual reminder to you, and others who may use the

equipment, to follow the safety instructions necessary for

safe, effective operation.

Warning: Read Operator’s Manual.

Read and understand the Operator’s

Manual before using this machine.

Danger: Thrown Objects.

This machine is capable of throwing

objects and debris. Keep bystanders

away.

Warning: Remove Key Before

Servicing.

Remove the key and consult technical

literature before performing repairs or

maintenance.

Danger: Machine Rollover.

Do not use this machine on slopes

greater than 10°.

Danger: Dismemberment.

This machine can amputate limbs.

Keep bystanders and children away

when engine is running.

Danger: Dismemberment.

This mower deck can amputate limbs.

Keep hands and feet away from

blades.

Danger: Fire Hazard.

Do not add fuel while engine is hot or

running. Stop engine and allow to

cool for 3 minutes prior to adding fuel.

Danger: Hot Surface.

Allow machine to cool before

touching this area.

Danger: Carbon Monoxide

Poisoning.

Do not operate the engine in an

unventilated area.

Warning : Fire hazard.

Keep children, open flames and

sparks away from the battery, which

could ignite explosive gases.

Warning: Sulfuric acid can cause

blindness or severe burns.

Always wear safety goggles or a face

shield when working on or near a

battery.

Warning: Batteries produce

explosive gases.

Read and understand the Operator’s

Manual before using this machine.

Important: Do not discard a

battery in the trash.

Contact local authorities for disposal

and/or recycling of batteries.

Danger: Dismemberment.

This mower deck can am-

putate limbs. Keep hands

and feet away from blades.

Safety Icons

Not for

Reproduction

11

Transmission

Release

Part No. 1730202

173xxxx

Attachment Lift

Part No. 1730264

Fuel Level

Part No. 1730172

1730172

1730264

Ignition Switch

Positions

Part No. 1722806

Decal Locations

CE-Danger, Rotating Blades,

Part No. 1720389

Operating Instructions,

CE Models, Part No. 1734027

CE-Danger, Rotating Blades,

Part No. 1720389

en

Not for

Reproduction

Features & Controls

Throttle/Choke Control

(Choke-A-Matic)

The throttle/choke controls the engine speed and choke

(see Figure 1). Move the throttle/choke control to the

FAST position to increase engine speed and SLOW

position to decrease engine speed. Always operate at full

throttle. Move the throttle/choke control to the CHOKE

position for starting a cold engine. A warm engine may

not require choking.

Headlights

The light switch turns the tractor headlights on and off.

Hour Meter

The hour meter measures the number of hours the key

has been in the RUN position.

Control Functions

The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing

require the combined use of several controls applied in specific sequences. To learn what combination and sequence

of controls to use for various tasks see the OPERATION section.

Figure 1. Controls

12

Not for

Reproduction

13

Reverse Mowing Option (RMO)

The Reverse Mowing Option allows for mowing (or use of

other PTO driven attachments) while traveling in reverse.

If you choose to mow in reverse, turn the RMO key after

the PTO is engaged. The L.E.D. light will illuminate, and

the operator can then mow in reverse. Each time the

PTO is engaged the RMO needs to be reactivated if

desired.

PTO Switch

The PTO (Power Take-Off) switch engages and

disengages attachments that use the PTO. To engage

the PTO, pull UP on the switch. Push DOWN to

disengage. Note that the operator must be seated firmly

in the tractor seat for the PTO to function.

Ignition Switch

The ignition switch starts and stops the engine, it has

three positions:

OFF Stops the engine and shuts off the

electrical system.

RUN Allows the engine to run and powers the

electrical system.

START Cranks the engine for starting.

NOTE: Never leave the ignition switch in the RUN

position with the engine stopped–this drains the battery.

Ground Speed Pedals

The tractor’s forward ground speed is controlled by the

forward ground speed control pedal. The tractor’s

reverse ground speed is controlled by the reverse ground

speed control pedal.

Depressing either pedal will increase ground speed.

Note that the further down the pedal is depressed, the

faster the tractor will travel.

Cruise Control

The cruise control is used to lock the ground speed

control in forward. The cruise control has five lock

positions.

Mower Height of Cut Adjustment

The mower cutting height adjustment lever controls the

mower cutting height. The cutting height is infinitely

adjustable between 1.0 and 4.0” (2,5 and 10,2 cm).

Seat Adjustment Lever

The seat can be adjusted forward and back. Move the

lever, position the seat as desired, and release the lever

to lock the seat into position.

Transmission Release Valve Lever

The transmission release valve lever deactivates the

transmission so that the tractor can be pushed by hand.

See PUSHING THE TRACTOR BY HAND for operational

information.

Fuel Tank

To remove the cap, turn counterclockwise.

Fuel Level Gauge

Displays the fuel level in the tank.

Parking Brake

The parking brake knob is used to lock the parking brake

when the tractor is stopped. Fully depressing the brake

pedal and pulling up on the knob engages the parking

brake.

Brake Pedal

Depressing the brake pedal applies the tractor brake.

en

Not for

Reproduction

14

Figure 2. Engaging the Parking Brake

Parking Brake Function

Applying the Parking Brake - See Figure 2. To lock the

parking brake, release the ground speed pedals (A), fully

depress the brake pedal (B), pull UP on the parking brake

knob (C), and then release brake pedal.

Releasing the Parking Brake - See Figure 2. To

release the parking brake, depress the brake pedal (B).

Hourmeter

The hour meter (E, Figure 2) measures the number of

hours the key has been in the RUN position.

B

C

A

E

D

Cruise Control Operation

TO ENGAGE:

1. Pull up on the cruise control knob (D, Figure 2).

2. Depress the forward ground speed pedal (A).

3. Lift up the Cruise control knob (D) when desired

speed is reached. The Cruise will lock in one of its

five locking positions.

TO DISENGAGE:

1. Depress the brake pedal (B).

OR

2. Depress the forward ground speed pedal (A).

Not for

Reproduction

15

Operation

Adding Fuel

1. Remove the fuel cap (A, Figure 3).

2. Fill the tank. Do not overfill. Leave room in the tank for

fuel expansion. Refer to your engine manual for

specific fuel recommendations.

3. Install and hand tighten the fuel cap.

Starting The Engine (Choke-A-Matic)

1. Sit in the seat and lift UP the seat adjustment lever,

position the seat as desired, and release the lever to

lock the seat in position.

2. Fully depress the brake pedal or set the parking

brake with pedal fully depressed, pull UP on parking

brake knob, then release pedal.

3. Disengage PTO switch by pushing IN.

4. Move the throttle/choke control to the CHOKE

position.

5. Insert the ignition key and turn clockwise to the

START position and release the key as soon as the

engine starts.

6. After the engine starts, move the throttle/choke control

to half speed. Warm up the engine by running it for at

least 30 seconds.

7. Set throttle/choke control to the FAST position.

NOTE: In the event of an emergency, the engine can be

stopped by turning the ignition switch to STOP. For

normal engine shut down, follow the procedure in

"Stopping the Tractor & Engine."

WARNING

Gasoline is highly flammable and must be

handled with care. Never fill the tank when the

engine is still hot from recent operation. Do not

allow open flame, smoking or matches in the

area. Avoid over-filling and wipe up any spills.

Do not use gasoline containing METHANOL,

gasohol containing more than

10% ETHANOL, gasoline additives, or white

gas because engine/fuel system damage

could result.

Test 1 — Engine should NOT crank if:

• PTO switch is ON, OR

• Brake pedal is NOT fully depressed (parking brake

OFF), OR

• The cruise control lever is NOT in NEUTRAL.

Test 2 — Engine SHOULD crank and start if:

• Operator is sitting in seat, AND

• PTO switch is OFF, AND

• Brake pedal is fully depressed (parking brake ON),

AND

• The cruise control lever is in NEUTRAL.

Test 3 — Engine should SHUT OFF if:

• Operator rises off seat.

Test 4 — Check Mower Blade Stopping Time

Mower blades and mower drive belt should come to a

complete stop within five seconds after electric PTO

switch is turned OFF. If mower drive belt does not stop

within five seconds, see your dealer.

Test 5 — Check Reverse Mow Option (RMO)

• Engine should shut off if reverse travel is attempted if

the PTO has been switched on and RMO has not

been activated.

• RMO light should illuminate when RMO has been

activated.

en

Safety Interlock System Tests

This unit is equipped with safety interlock switches and

other safety devices. These safety systems are present

for your safety: do not attempt to bypass safety switches,

and never tamper with safety devices.

WARNING

If the unit does not pass a safety test, do not

operate it. See your authorized dealer.

Not for

Reproduction

16

Stopping The Tractor & Engine

1. Return the ground speed control(s) to NEUTRAL.

2. Disengage the PTO and wait for all moving parts to

stop.

3. Move the throttle/choke control to the SLOW position

and turn the ignition key to OFF. Remove the key.

Driving The Tractor

1. Sit in the seat and adjust the seat so that you can

comfortably reach all the controls and see the dashboard

display.

2. Engage the parking brake.

3. Make sure the PTO switch is disengaged.

4. Start the engine (see

Starting the Engine

).

5. Disengage the parking brake and release the brake

pedal.

6. Depress the forward ground speed control pedal to travel

forward. Release the pedal to stop. Note that the further

down the pedal is depressed the faster the tractor will

travel.

7. Stop the tractor by releasing the ground speed control

pedals, setting the parking brake, and stopping the

engine (see

Stopping the Tractor and Engine

).

Mowing

1. Set the mower cutting height to the desired level and

set the gauge wheels to the appropriate position (if

equipped).

2. Engage the parking brake. Make sure the PTO switch

is disengaged.

3. Start the engine (see

Starting the Engine

).

4. Set the throttle/choke control to the FAST position.

5. Engage the PTO (Mower Deck).

6. Begin mowing.

7. When finished, shut off the PTO and raise the mower

deck.

8. Stop the engine (see

Stopping the Tractor and

Engine

).

DO NOT TOW TRACTOR

Towing the unit will cause transmission

damage. • Do not use another vehicle to

push or pull this unit. • Do not actuate the

transmission release valve lever while the

engine is running.

Figure 3. Transmission Release Lever & Fuel Tank

B

A

Mowing in Reverse

If an operator chooses to mow in reverse, the RMO

system can be used. To use the Reverse Mowing Option

(RMO) turn the RMO key after the PTO is engaged. The

L.E.D. light will illuminate, and the operator can then mow

in reverse. Each time the PTO is engaged the RMO

needs to be reactivated if desired. The key should be

removed to restrict access to the RMO feature.

Attachment Operation in Reverse

If an operator chooses to operate a PTO driven

attachment in reverse, the RMO system can be used. To

use the Reverse Mowing Option (RMO) turn the RMO key

after the PTO is engaged. The L.E.D. light will illuminate,

and the operator can then operate the attachment in

reverse. Each time the PTO is disengaged the RMO

needs to be reactivated if desired. The key should be

removed to restrict access to the RMO feature.

Pushing the Tractor by Hand

1. Disengage the PTO and turn the engine off.

2. Pull the transmission release (B, Figure 3) back

approximately 2-3/8” (6 cm) to lock into released

position.

3. The tractor can now be pushed by hand.

WARNING

Mowing in reverse can be hazardous to

bystanders. Tragic accidents can occur if the

operator is not alert to the presence of children.

Never activate RMO if children are present.

Children are often attracted to the unit and the

mowing activity.

WARNING

The engine will shut off if the reverse ground

speed pedal is depressed while the PTO is on

and the RMO has not been activated. The

operator should always turn the PTO off prior to

driving across on roads, paths or any area that

maybe used by other vehicles. Sudden loss of

drive could create a hazard.

Not for

Reproduction

17

Storage

Before you store your unit for the off-season, read the

Maintenance and Storage instructions in the Safety Rules

section, then perform the following steps:

• Disengage the PTO, set the parking brake, & remove

the key.

• Perform engine maintenance and storage measures

listed in the engine owner’s manual. This includes

draining the fuel system, or adding stabilizer to the

fuel (do not store a fueled unit in an enclosed structure

- see warning).

• Battery life will be increased if it is removed, put in a

cool, dry place and fully charged about once a month.

If the battery is left in the unit, disconnect the negative

cable.

Before starting the unit after it has been stored:

• Check all fluid levels. Check all maintenance items.

• Perform all recommended checks and procedures

found in the engine owner’s manual.

• Allow the engine to warm up for several minutes

before use.

Attaching a Trailer

The maximum horizontal drawbar force allowed is

280 Newton. The maximum vertical drawbar force is

160 Newton. This equates to a 250 lbs (113 kg) trailer on

a 10 degree hill. Secure the trailer with an appropriately

sized clevis pin (A, Figure 5) and clip (B).

WARNING

Never store the unit (with fuel) in an enclosed,

poorly ventilated structure. Fuel vapors can

travel to an ignition source (such as a furnace,

water heater, etc.) and cause an explosion.

Fuel vapor is also toxic to humans and animals.

Figure 5. Trailer Weight Recommendations

A

B

Figure 4. Raising & Lowering Mower

A

Adjusting Mower Cutting Height

The cutting height lift lever (A, Figure 4) controls the mower

cutting height. The cutting height is infinitely adjustable

between 1.0 and 4.0” (2,5 and 10,2 cm).

en

Not for

Reproduction

Maintenance

Maintenance Chart

Check Tire Pressure

Tire Pressure should be checked periodically, and

maintained at the levels shown in the chart (Figure 6).

Note that these pressures may differ slightly from the

“Max Inflation” stamped on the side-wall of the tires. The

pressures shown provide proper traction, improve cut

quality, and extend tire life.

Figure 6. Tire Pressure

Size PSI bar

20 x 10,0-8 10 0,68

15 x 6,0-6 12-14 0,82-0,96

TRACTOR AND MOWER

Every 8 Hours or Daily

Check safety interlock system

Clean debris off tractor and mower deck

Clean debris from engine compartment

Every 25 Hours or Annually *

Check mower blade stopping time

Check tractor and mower for loose hardware

Check tire pressure

Every 50 Hours or Annually *

Check tractor brakes

Clean battery and cables

See Dealer Annually to

Lubricate tractor and mower

Check mower blades **

* Whichever comes first

** Check blades more often in regions with sandy soils or

high dust conditions.

ENGINE

First 5 Hours

Change engine oil

Every 8 Hours or Daily

Check engine oil level

Every 25 Hours or Annually *

Clean engine air filter and pre-cleaner **

Every 50 Hours or Annually *

Change engine oil

Replace oil filter

Annually

Replace air filter

Replace pre-cleaner

See Dealer Annually to

Inspect muffler and spark arrester

Replace spark plug

Replace fuel filter

Clean engine air cooling system

* Whichever comes first

** Clean more often in dusty conditions or when airborne

debris is present.

18

Not for

Reproduction

19

7. Reinstall the battery (E) in the battery compartment.

Secure with the battery hold-down rod (C) and

wingnut & washer (D).

8. Re-attach the battery cables, positive cables and

cover first (B) then the negative cables (A).

9. Coat the cable ends and battery terminals with

petroleum jelly or non-conducting grease.

Figure 7. Battery Maintenance

Check Mower Blade Stopping Time

Mower blades and mower drive belt should come to a

complete stop within five seconds after the electric PTO

switch is turned off.

1. With tractor in neutral, PTO disengaged and operator

in seat, start the engine.

2. Look over the left-hand footrest at the mower drive

belt. Engage the PTO and wait several seconds.

Disengage the PTO and check the amount of time it

takes for the mower drive belt to stop.

3. If mower drive belt does not stop within five seconds,

see your dealer.

D

C

E

A

B

Engine Maintenance

NOTE: See the Engine Manual for maintenance

procedures.

Cleaning the Battery and Cables

1. Disconnect the cables from the battery, negative

cables first (A, Figure 7) then the cover & positive

cables (B).

2. Loosen the wingnut & washer (D).

3. Pivot the hold-down rod (C) up and away from battery.

Secure to steering tower.

4. Remove the battery (E).

5. Clean the battery compartment with a solution of

baking soda and water.

6. Clean the battery terminals and cable ends with a wire

brush and battery terminal cleaner until shiny.

WARNING

When removing or installing battery cables,

disconnect the negative cable FIRST and reconnect

it LAST. If not done in this order, the positive

terminal can be shorted to the frame by a tool.

en

Not for

Reproduction

20

Seat Adjustment

The seat can be adjusted forward and back. Move the

lever (A, Figure 8), position the seat as desired, and

release the lever to lock the seat into position.

Battery Charging

A dead battery or one too weak to start the engine may be

the result of a defect in the charging system or other

electrical component. If there is any doubt about the

cause of the problem, see your dealer. If you need to

replace the battery, follow the steps under Cleaning the

Battery & Cables.

To charge the battery, follow the instructions provided by

the battery charger manufacturer as well as all warnings

included in the safety rules sections of this book. Charge

the battery until fully charged. Do not charge at a rate

higher than 10 amps.

WARNING

Keep open flames and sparks away from the

battery; the gasses coming from it are highly

explosive. Ventilate the battery well during

charging.

Figure 8. Seat Adjustment

A

Gauge Wheels

The mower gauge wheels can be placed in three

positions depending on the height of cut. When using

higher cutting heights, set the wheels in the lower

position. When using lower cutting heights, set the

wheels in the upper position. Do not allow wheels to

remain on the ground constantly while mowing. To adjust:

1. Remove the locknut (B, Figure 9), gauge wheel (C),

washers (D), and shoulder bolt (E). Change position

of gauge wheel to desired height.

2. Insert shoulder bolt (E) through washers (D) gauge

wheel (C), and gauge wheel bracket (A). Secure with

locknut (B). Repeat steps 1 & 2 for all gauge wheels.

Figure 9. Fixed Bracket Gauge Wheel Adjustment

B

C

E

D

A

Not for

Reproduction

Sivu latautuu ...

Simplicity VICTA RIDING MOWERS CE (EVT175460, EVT20460) Ohjekirja

Tämä käsikirja sopii myös

Simplicity VICTA RIDING MOWERS CE (EVT175460, EVT20460) Ohjekirja

muilla kielillä

Liittyvät paperit

Muut asiakirjat