Yamaha RX-V471 Omistajan opas

Brändi: Yamaha

Malli: RX-V471

Kategoria: AV receivers

Tyyppi: Omistajan opas

Please read “Safety Brochure” before use.

AV Receiver

Owner’s Manual

English for North America, Europe and Oceania

En 2

CONTENTS

Check the supplied items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

FEATURES

What you can do with the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Full of useful functions!. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

At time like this . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Part names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Front display (indicator) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

SETUP

General setup procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Speaker layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

5.1-channel speaker layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

4.1-channel speaker layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

3.1-channel speaker layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

2.1-channel speaker layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Connecting speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

5.1-channel speaker layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Cable plugs and jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Audio/video jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Analog video jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Audio jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Connecting a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Connecting playback devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Connecting video devices (such as BD/DVD players) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Connecting audio devices (such as a CD player) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Connecting to the jack on the front panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Connecting the FM/AM antennas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Connecting recording devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Connecting the power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Optimizing the speaker settings automatically (YPAO) . . . . . . . . . . . . 26

Preparation before using YPAO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Starting the measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Confirming the measurement result . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Warning messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

PLAYBACK

Basic playback procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Switching the sleep timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Switching the information displayed on the front display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Changing input settings with a single key (SCENE function) . . . . . . . . 32

Changing the settings for the SCENE function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Enjoying the desired sound field effect . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Enjoying sound field effects (CINEMA DSP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Enjoying multi-channel sounds (surround decoder) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Playback without sound field effects (straight decoding mode). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Playing back fidelity sound of the selected source (direct mode). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Playing back the compressed audio dynamically (Compressed Music Enhancer) . . . . . . . . . . . . . . . . . . . . . 37

Enjoying surround audio with headphones (SILENT CINEMA). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Listening to FM/AM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Selecting a frequency for reception. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Registering favorite stations (Preset tuning) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Radio Data System tuning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Combining audio from the radio with video from an external device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Playing back songs with iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Connecting an iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Controlling while watching a TV monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Controlling by iPod itself . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

En 3

Playing back songs with Bluetooth devices. . . . . . . . . . . . . . . . . . . . . . . .50

Connecting a Bluetooth wireless audio receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Pairing Bluetooth devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Playing back songs by connecting to the Bluetooth device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Playing back songs with USB storage devices. . . . . . . . . . . . . . . . . . . . . .52

Connecting a USB storage device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Controlling while watching a TV monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Combining a song from a USB storage device (iPod) with video from an external device. . . . . . . . . . . . . .55

Configuring settings specific to an individual input source

(Option menu). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Available settings in Option menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

CONFIGURATIONS

Configuring various functions (Setup menu) . . . . . . . . . . . . . . . . . . . . . .60

Setup menu list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Configuring the speaker settings (Speaker) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Configuring the settings of audio output signals (Sound). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Setting sound program and decoder parameters (DSP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Configuring the various settings (Function) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

Setting HDMI functions (HDMI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Setting the language displayed on the TV screen (Language) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Configuring the system settings of the unit

(ADVANCED SETUP menu) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Operating the ADVANCED SETUP menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Features of the ADVANCED SETUP menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Changing the speaker impedance (U.S.A. and Canada models only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Changing the remote control ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Changing TV format. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Initializing various settings for the unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Controlling other devices with the remote control . . . . . . . . . . . . . . . . .74

Registering remote control codes for TV operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

Registering remote control codes for external device operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

Initializing all remote control codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76

APPENDIX

Frequently asked questions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Power/system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Video. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Tuner (FM/AM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Message list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Ideal speaker layout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Audio information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Video information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85

Video signal flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Information on HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

HDMI Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

HDMI signal compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88

Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

PLAYBACK (continued)

En 4

Check the supplied items

Check that the following accessories are supplied with this product.

■ Remote Control ■ Batteries (AAA, R03, UM-4) (x 2)

■ YPAO microphone ■ VIDEO AUX input cover

■ AM antenna ■ FM antenna

* The supplied FM antenna will differ depending

on the country or region.

■ CD-ROM (Owner’s Manual) ■ Easy Setup Guide

■ Safety Brochure

Preparing the remote control

• Insert the two supplied AAA batteries into the battery case, following the polarity markings (+ and -).

Operating range of the remote control

• Be sure to aim the remote control within the following range at the remote control sensor on the unit

during operation.

• This manual is created prior to production of the product. Some parts of the product and the

specifications may differ as a result of improvements, etc.

• This manual mainly explains operations using the supplied remote control.

• “ ” indicates the explanations for better use.

• “ ” indicates the cautions concerning operations or setup of the unit.

• This manual describes both the “iPod” and “iPhone” as the “iPod.” “iPod” means both “iPod” and

“iPhone” unless the explanation describes exceptions.

Within

6 m (20 ft.)

En 5

FEATURES

What you can do with the unit

AV receiver (the unit)

Selecting the input source and

favorite settings at once (SCENE)

p.32

p.24

p.87

p.26

p.34

p.36

p.37

p.43, 50

p.46, 52

p.74

Easily connecting devices such

as game console to the audio/

video jacks on the front panel

Operating the TV, AV

receiver and BD/DVD player

in combination

(HDMI Control)

Supports 2 to 5.1 channel speaker system.

Allows you to enjoy favorite acoustic spaces in

various styles.

Automatically optimizing the speaker

settings to suit your room (YPAO)

Sound field reproductions like actual

movie theaters and concert halls

(CINEMA DSP)

Multi-channel playback from stereo

sounds (surround decoder)

Enjoying enhanced compression

artifacts (Compressed Music

Enhancer)

Enjoying music stored on

iPod or Bluetooth devices

Operating the iPod or USB

menu (on TV)

* Requires optional Yamaha products such as iPod dock, iPod

wireless system, and Bluetooth receiver.

Operating external

devices with the supplied

remote control

USB device

iPod dock/iPod

wireless system

(optional)

Bluetooth receiver

(optional)

HDMI Control

Audio/Video

BD/DVD player

Remote control

of this unit

TV remote control

Video

Audio

HDMI Control

Audio

Speakers

Audio

En 6

Full of useful functions!

● Connecting various devices (p.16, 21)

Various input/output jacks on the unit allow you to

connect external devices such as BD/DVD player and

CD player. The unit is also equipped with input jacks on

the front panel which allow you easily connect and enjoy

game consoles, camcorders and USB devices, and so

on.

● Playing back TV audio in surround sound

with a single HDMI cable connection (Audio

Return Channel: ARC) (p.16, 70)

When using a TV that supports ARC, you only need an

HDMI cable to connect the TV and this unit. Making

such a simple connection enables to output video to the

TV, input audio from the TV, and transmit HDMI Control

signals at once.

● Creating stereoscopic sound fields (p.36)

The unit supports the surround playback of up to 5.1

channel. Various sound programs and surround

decoders equipped with the unit can supply more

intensive and accurate stereoscopic sound field in your

room. And, the unit creates virtual presence speakers to

produce 3D surround sound (CINEMA DSP 3D).

● Listening to radio with built-in receiver

(p.38)

You can register up to 40 favorite radio stations as

preset stations automatically or manually.

● Enjoying faithful sound compared to the

original source (p.37)

When the Direct mode is enabled, the unit plays back

the selected source with the least circuitry. It allows you

to enjoy the faithful sound quality compared to the

original source.

● Easy operation with a TV monitor

When connecting your TV to the unit with an HDMI

cable, the menu of the unit can be displayed on the TV

monitor to operate the unit. You can set the settings of

the unit viewing the TV monitor.

• YPAO (p.26)

• Operation menus of iPod and USB device (p.46, 52)

• The “Option” menu (p.56)

• The “Setup” menu (p.60)

At time like this

The combination of video/audio input jacks prepared on

this unit does not match an external device...

Use “Audio In” in the “Option” menu to change the

combination of video/audio input jacks so that it matches

the output jack of your external device (p.22).

I want to fine adjust sound quality...

Use “Equalizer” in the “Setup” menu to adjust sound quality

of tone with an equalizer (p.63).

Video and audio are not synchronized...

Use “Lipsync” in the “Setup” menu to adjust the delay

between video and audio output (p.64).

I want to hear audio from the TV speakers...

Use “Audio Output” in the “Setup” menu to redirect the

output audio signal to the TV (p.70).

I want to prevent forgetting to turn the unit off...

Use “Auto Power Down” in the “Setup” menu to prevent

forgetting to turn the unit off (p.68).

I want to play back BD/DVD player without the unit

turned on...

Use “Standby Through” in the “Setup” menu to play back

BD/DVD player while the unit keeps to be turned off (p.71).

There are many other functions to customize or confirm

the settings of this unit.

For details, see the following pages.

• SCENE settings (p.32)

• Sound program and surround decoder settings (p.65)

• Various function settings (p.68)

• Current signal information (audio signal, video signal)

(p.58)

• Basic settings before use (p.72)

BD/DVD

player

Camcorder

player

USB

device

Portable

audio player

HDMI Control

TV audio

Video from

external device

En 7

Front panel

1 (power) key

Turns the unit on or into the standby mode.

2 Standby indicator

When the unit is in standby mode, lights up in any of the

following cases when:

- The “Standby Through” function is working (p.71).

- The iPod is charging with “Standby Charge” (p.58).

- The Yamaha iPod wireless system is connected (p.45).

3 YPAO MIC jack

For connecting the supplied YPAO microphone (p.26).

4 Remote control receiver

Receives signals from remote control (p.4).

5 INFO

Changes the information displayed on the front display

(p.31).

6 MEMORY

Registers FM/AM stations as preset stations (p.39).

7 PRESET

Selects the FM/AM preset stations (p.39).

8 FM/AM

Switches FM/AM tuner band to FM or AM (p.38).

9 Front display

Displays information about the unit (p.8).

0 TUNING

Changes FM/AM tuner frequency (p.38).

a DIRECT

Enables/disables the direct mode (p.37).

b PHONES jack

For connecting headphones.

c USB port

For connecting USB devices (p.52).

d INPUT

Switches the selected input source.

e TONE CONTROL

Adjusts high-frequency/low-frequency output of speakers

and headphones (p.57).

f SCENE

Selects the input source and the sound programs with a

single button. When the unit is in standby mode, press this

key to turn on the unit (p.32).

g PROGRAM

Selects a sound program and surround decoder (p.33).

h STRAIGHT

Enables/disables the straight decoding mode (p.37).

i VIDEO AUX jack

For connecting camcorders, game consoles, etc (p.24).

Attach the supplied VIDEO AUX input cover (p.4) when not

using this jack to protect against dust.

j VOLUME

Adjusts the volume level.

Part names and functions

INFO MEMORY PRESET

AM TUNING

DIRECT

VOLUME

VIDEO

PORTABLE

L AUDIO R

VIDEO AUX

STRAIGHTTONE CONTROL

DVD

TV CD RADIO

PHONES

SILENT CINEMA

USB

iPod/iPhone

PROGRAM

SCENE

INPUT

YPAO MIC

NATURAL SOUND AV RECEIVER RX-V471

En 8

Front display (indicator)

1 HDMI

Lights up when an HDMI device is connected to the unit or

an HDMI signal is being output.

OUT

Lights up when HDMI signals are output.

2 CINEMA DSP

Lights up when a sound program with CINEMA DSP is

activated.

3 CINEMA DSP 3D

Lights up when CINEMA DSP 3D (p.36) is activated.

4 ENHANCER

Lights up when the Compressed Music Enhancer (p.37) is

activated.

5 ADAPTIVE DRC

Lights up when Adaptive DRC (p.57) is activated.

6 STEREO

Lights up when stereo broadcasting is input.

TUNED

Lights up when an FM/AM station is received.

7 SLEEP

Lights up when the sleep timer is on (p.31).

8 MUTE

Flashes when audio is muted.

9 VOLUME

Displays the current volume level.

0 Cursor indicators

Lights up the available cursors on the remote control for each

operation.

a Multi information display

Displays a range of information.

Press INFO on the remote control or front panel repeatedly to

cycle through displayed information (p.31).

b Speaker indicators

Displays speaker terminals from which signals are output.

STEREO

SLEEP

VOL.

TUNED

SL SR

MUTE

ENHANCER ADAPTIVE DRC

OUT

Front speaker L

Front speaker R

Center speaker

Surround speaker L

Surround speaker R

Subwoofer

En 9

Rear panel

1 DOCK jack

For connecting an optional Yamaha iPod universal dock,

Wireless System for iPod and Bluetooth wireless audio

receiver (p.44, 45, 50).

2 HDMI OUT jack

For connecting a TV that is compatible with HDMI input to

output audio/video signals. TV audio is input when ARC is

used (p.16, 18, 19).

3 ANTENNA jacks

For connecting AM and FM antennas (p.24).

4 HDMI 1-4 jacks

For connecting external devices that are compatible with

HDMI outputs to receive audio/video signals (p.21).

5 SPEAKERS terminals

For connecting speakers (p.14).

6 Power cable

For connecting the unit to an AC wall outlet (p.25).

7 MONITOR OUT jacks

COMPONENT VIDEO jacks

For connecting a TV that is compatible with component video

signals and outputting video signals (p.20).

VIDEO jack

For connecting a TV that is compatible with video signals to

output video signals (p.20).

8 AV1-6 jacks

For connecting to playback devices equipped with audio/

video outputs to receive audio/video signals (p.21).

9 AV OUT jacks

For outputting received audio/video signals when analog

inputs (AV5-6 or AUDIO) are selected (p.25).

0 AUDIO jacks

For connecting to playback devices equipped with analog

audio outputs to input audio signals (p.23).

a SUBWOOFER jack

For connecting a subwoofer with a built-in amplifier (p.14).

HDMI 1

(BD/DVD)

HDMI 2

HDMI 3

HDMI 4

75Ω

AM FM

ANTENNA

VIDEO

AV 1

OPTICAL

AV 2 AV 3 AV 4 AV 5 AV 6

AUDIO

COAXIAL COAXIAL

(CD) (TV)

OPTICAL

FRONT CENTER SURROUND

MAINS

SPEAKERS

OUT

MONITOR OUT

COMPONENT

VIDEO

HDMI OUT

ARC

MONITOR OUT

DOCK

SUBWOOFER

(U.K. and Europe models)

The area around the audio/video output jacks is marked in

white. Use these jacks to output audio/video signals to a TV

or other external device.

DOCK

HDMI 1

(BD/DVD)

HDMI 2 HDMI 3

75Ω

AM FM

ANTENNA

VIDEO

AV 1

OPTICAL

AV 2 AV 3 AV 4 AV 5 AV 6

AUDIO

COAXIAL COAXIAL

(CD) (TV)

OPTICAL

SUBWOOFER

OUT

MONITOR OUT

COMPONENT

VIDEO

HDMI OUT

ARC

MONITOR OUT

HDMI 4

FRONT CENTER SURROUND

SPEAKERS

DOCK

HDMI 1

(

BD/DVD

)

HDMI 2

HDMI

5Ω

ANTENN

IDE

PTICAL

V 3

V 5

V 6

OAXIA

COAXIAL

(CD

)

(

)

OPTICAL

DMI

ENTE

URR

UND

PEAKER

Output jacks

En 10

Remote control

1 Remote control signal transmitter

Transmits infrared signals.

2 SOURCE (source power)

Switches an external device on and off.

3 Input selection keys

Select an input source on the unit to play back.

4 Radio keys

Operate the FM/AM tuner.

5 INFO

Switches the information displayed on the front display

(p.31).

6 SLEEP

Selects the time of sleep timer (120 min., 90 min., 60 min.,

30 min., and Off) by pressing this key repeatedly. SLEEP

indicator lights up on the front display while using the sleep

timer. After the selected time passes, the unit switches into

the standby mode.

7 SCENE

Switch the input source and the sound program with a single

button. When the unit is in standby mode, pressing this key

turns on the unit (p.32).

8 SETUP

Displays/finishes the “Setup” menu for the unit (p.60).

9 Menu operation keys

0 External device operation keys

Operate recording, playback, menu displays, etc. for

external devices (p.75, 76).

a MODE

Switches the FM broadcast receiving modes (p.38) or the

iPod operation modes (p.49).

b Numeric keys

Enter numbers such as the frequency of FM/AM tuner and

remote control codes.

c TV control keys

Controls TV operation, such as input and volume level

(p.74, 75).

d CODE SET

Sets remote control codes for external devices (p.74).

e SOURCE/RECEIVER

Switches the device (external device or the unit) that is available

with remote control keys. Lights up in orange when the unit is

selected, in green when an external device is selected.

f RECEIVER (receiver power)

Switches the unit between on and standby mode.

g Sound selection keys

Switches between the sound field effect (sound program)

you are using and the surround decoder (p.33).

h OPTION

Displays/finishes the “Option” menu for each input source

(p.56).

i VOLUME

Adjusts the volume balance (p.31).

j MUTE

Turns the mute function on and off (p.31).

• Remote control codes need to be registered in advance to operate

external devices with this remote control. If you use HDMI

compatible devices, remote control might be available only by

connecting them (p.87).

SCENE

RETURN

VOLUME

ENHANCER

SLEEP DIRECT

HDMI

INFO

MEMORY

PRESET

MOVIE MUSIC

DVD

MUTE

ENTER

TV VOL TV CH

TOP

POP-UP

DISPLAY

SOURCE

RECEIVER

CODE SET

DOCK

USB

AUDIO

OPTION

SETUP

TUNING

STRAIGHT

SUR. DECODE

INPUT

MUTE

9 0

ENT

56 87

1234

MODE

RADIO

TUNER

1 2 3

[ A ]

1 2 3 4

V-AUX

HDMI 1-4 HDMI 1-4 jacks

V-AUX VIDEO AUX jack on the front panel

AV 1-6 AV 1-6 jacks

AUDIO Audio jack

DOCK A Yamaha iPod universal dock, iPod

wireless receiver, and Bluetooth

wireless receiver that are connected to

the DOCK jack.

TUNER FM/AM tuner

USB USB devices connected the USB jack.

[A] Switches an external device that can

be operated with the External device

operation keys without changing inputs

(p.75).

FM Sets the FM/AM tuner band to FM.

AM Sets the FM/AM tuner band to AM.

MEMORY Presets radio stations.

PRESET Selects a preset station.

TUNING Changes tuning frequencies.

Cursor keys Select menu items and settings.

ENTER Confirms a selected item.

RETURN Returns to the previous screen when

the menu is displayed.

En 11

SETUP

Perform the following 8 steps before use.

All settings needed before use are completed here. Enjoy playing movies, music, radio, etc. with the unit!

General setup procedure

1 Speaker layout (p.12)

Select the speaker layout depending on the number of speakers, and then place the speakers in

the room.

2 Connecting speakers (p.14)

Connect each speaker to the unit.

3 Connecting a TV (p.16)

Connect TV to the unit.

4 Connecting playback devices (p.21)

Connect video devices (BD/DVD players, etc.) or audio devices (CD players, etc.) to the unit.

5 Connecting the FM/AM antennas (p.24)

Connect the FM/AM antennas to the unit.

6 Connecting recording devices (p.25)

Connect external devices such as recording devices.

7 Connecting the power cable (p.25)

After all the settings above are complete, plug in the power cable.

Optimizing the speaker settings automatically

(YPAO) (p.26)

Adjust the volume balance and tone of speakers automatically (YPAO).

En 12

Select the speaker layout depending on the numbers of speakers, and then place the speakers and subwoofer (with a built-in amplifier) in the room.

The following section describes the representative speaker configuration of 2.1 to 5.1 channel system.

• To get recommended speaker layout, refer to “Ideal speaker layout” (p.83).

1 Speaker layout

NOTES

• (U.S.A. and Canada models only) The unit is configured to 8Ω speakers as the factory setting. 6Ω speakers can be also connected. For details on settings for 6Ω speaker connection, refer to “Changing the speaker

impedance (U.S.A. and Canada models only)” (p.72).

• (Except for U.S.A. and Canada models) Use speakers with an impedance of at least 6Ω.

Type of speakers Abbr. Function

Speaker system

(the number of channels)

5.1 4.1 3.1 2.1

Front (L)

For the front channel sound (stereo sound) and effect sound

●●●●

Front (R) ●●●●

Center For the center channel sound (dialogue, vocals, etc.) ●●

Surround (L)

For effect and vocal sound from surround channel. The surround back channel sound is output from the surround speakers

when 7.1- or 6.1-channel sounds are input.

●●

Surround (R) ●●

Subwoofer For low-frequency effect (LFE) sound and bass sound from front and surround channels. ●●●●

Speaker layout

2 3 4 5 6 7 8

En 13

5.1-channel speaker layout

4.1-channel speaker layout

3.1-channel speaker layout

2.1-channel speaker layout

Speaker layout

2 3 4 5 6 7 8

En 14

Connect speakers to the unit. Here are connections of

5.1-channel speaker layout as examples. If you select

another channel speaker layout, connect speakers while

referring to the connection of 5.1-channel speaker

layout.

Necessary cables (not supplied)

 Speaker cables x numbers of speakers

 Monaural pin cable (for subwoofer) x 1

5.1-channel speaker layout

■ Connecting speaker cables

Each speaker has two speaker cables. One is for

connecting the - (negative) terminal of the unit and the

speaker, and the other is for the + (positive) terminal.

The cables are different colors, so they do not get mixed

up. Connect the black side to the - (negative) terminal

and the other side to the + (positive) terminal.

1 Remove approximately 10 mm (0.4 in.) of insulation

from the end of the speaker cable and twist the bare

wire firmly.

2 Loosen the speaker

terminal.

3 Insert the bare wire

into the gap on the

side of terminal.

When it is difficult to

insert the wire into the

gap on the side,

insert it into the gap downside of terminal.

4 Tighten the terminal.

Connecting with a banana plug (Except for U.K. and

Europe models)

Tighten the knob, and then insert a banana plug into the

end of the terminal.

■ Connecting a subwoofer

Use monaural pin cable to connect a subwoofer.

Before connecting a subwoofer, turn off the subwoofer.

2 Connecting speakers

NOTES

• Disconnect the power plug before connecting speakers.

• Before connecting a subwoofer, turn off a subwoofer.

• Be careful that the core of the speaker cable does not touch

anything or come into contact with the metal areas of the unit.

This may damage the unit or the speakers. If the speaker cables

short circuit, “CHECK SP WIRES!” will appear on the front

display when the unit is switched on.

Speaker terminals on the rear of the unit

–

DOCK

HDMI 1

(BD/DVD)

HDMI 2 HDMI 3

HDMI 4

75Ω

MONITOR OUT

AM FM

ANTENNA

VIDEO

AV 1

OPTICAL

AV 2 AV 3 AV 4 AV 5 AV 6

OUT

AUDIO

COAXIAL COAXIAL

(CD) (TV)

OPTICAL

COMPONENT

VIDEO

FRONT CENTER SURROUND

SUBWOOFER

HDMI OUT

ARC

MONITOR OUT

FRONT CENTER SURROUND

SUBWOOFER

SPEAKERS

FRONT CENTER SURROUND

SUBWOOFER

The unit (rear)

+ (Red)

- (Black)

RON

Banana plug

Monaural pin cable

1 2

Connecting speakers

3 4 5 6 7 8

En 15

The unit is equipped with the following input/output jacks. Use jacks and cables appropriate for devices.

Audio/video jacks

HDMI jacks

Digital videos and sounds are transmitted. Use an HDMI

cable for connection.

• Use a 19-pin HDMI cable with the HDMI logo. Using an HDMI cable

less than 5.0 m (16.4 ft.) long is recommended to prevent signal

quality degradation.

• When connecting an external device with a DVI jack, use an HDMI/

DVI-D cable.

• The HDMI control function, the Audio Return Channel function and

transmission of 3D content are supported.

Analog video jacks

COMPONENT VIDEO jacks

The signal is separated into three devices:

Luminance (Y), chrominance blue (PB) and

chrominance red (PR).

Use a component video pin cable with three plugs.

VIDEO jack

This jack transmits conventional analog video signal.

Use a video pin cable.

Audio jacks

OPTICAL jacks

These jacks transmit optical digital audio signals. Use

fiber-optic cables for connection. Remove the cap

before using if needed.

COAXIAL jacks

These jacks transmit coaxial digital audio signals. Use

coaxial cables.

AUDIO jacks

These jacks transmit conventional analog audio signals.

Use stereo pin cables.

PORTABLE jack

This jack transmits conventional analog audio signals.

Use a stereo mini-plug cable when connecting.

Cable plugs and jacks

HDMI cable

Component video cables

Red

Blue

Green

Video pin cable

Digital optical cable

Digital coaxial cable

Stereo pin cable

Stereo mini-plug cable

En 16

Connect a TV to the unit. The video signals input to the unit are output to the TV.

TV audio can also be output from the unit. The recommended way to connect a TV

varies depending on types and functions of video input jacks on the TV.

Select how to connect the TV to the unit while referring to the TV manual.

■ Connection method 1

Connect a TV to the unit with an HDMI cable.

• The following connections and steps are supplied, supposing that “HDMI” in the “Setup” menu has not been

changed from the default setting (p.69).

• By connecting a TV to the unit with an HDMI cable, each function for the unit can be configured while

viewing the TV monitor (p.60).

• If your playback device is connected to the analog video input jacks (COMPONENT VIDEO or VIDEO), you

also need to connect the TV to the MONITOR OUT (COMPONENT VIDEO or VIDEO) jack with an analog

video cable (p.20).

Necessary settings

To use the HDMI control function and ARC, the following settings are required in

advance.

1 After connecting external devices (TV, playback devices, etc.) and AC

power cable, turn on the unit, TV and playback devices.

3 Connecting a TV

HDMI, component video, or composite video signal input to the unit is output from

the same type of output jack (p.86). Make necessary connections, and switch the

input source on TV depending on the playback device.

What is the HDMI control function?

By connecting a TV to the unit with an HDMI cable, some operations for the unit are

available with the TV’s remote control, such as turning on/standby and volume

control. If playback devices that support the HDMI control function (BD/DVD

players, etc.) are connected to the unit, these are also acceptable. For more details,

refer to “HDMI Control” (p.87).

What is the Audio Return Channel (ARC)?

If your TV supports the ARC, TV audio can be output to the unit by using an HDMI

cable transmitting video signals from the unit to a TV.

Does you TV support

Audio Return Channel (ARC)?

Does you TV support

HDMI Control?

Does your TV have an

HDMI input jack?

■ Connection method 1 (on this page)

■ Connection method 4 (p.20)*

■ Connection method 2 (p.18)

■ Connection method 4 (p.20)*

■ Connection method 3 (p.19)

■ Connection method 4 (p.20)*

* Necessary if your playback device is connected to the

video input jacks other than HDMI1-4 jacks.

■ Connection method 4 (p.20)

Yes

and

(ARC-compatible TV)

DOCK

HDMI 1

(BD/DVD)

75Ω

MONITOR OUT

AM FM

ANTENNA

VIDEO

AV 1

OPTICAL

AV 2 AV 3 AV 4 AV 5 AV 6

OUT

AUDIO

MONIT

COAXIAL COAXIAL

(CD) (TV)

OPTICAL

COMPONENT

VIDEO

HDMI OUT

ARC

HDMI OUT

ARC

HDMI

ARC

IHDMI

The unit (rear)

HDMI OUT jack

HDMI input

Continues to the

1 2 3

Connecting a TV

4 5 6 7 8

En 17

2 Configure the settings for ARC.

a Confirm that the ARC function for the TV is set to on.

For details on how to confirm, refer to manual of the TV.

b Select the input source of the TV to the video input from the HDMI OUT jack of the

unit.

c Press SETUP.

d Press the cursor keys ( / ) to select “HDMI.”

e Press the cursor keys ( / ) to select “HDMI Control,” and then press ENTER.

f Press the cursor keys ( / ) to select “On,” and then press ENTER.

g Confirm that “ARC” is set to “On.”

• “ARC” is set to “On” as the default setting. When “HDMI Control” is set to “On,” the ARC function of

the unit is enabled.

h Press SETUP.

3 Configure the settings for HDMI Control.

a Activate the HDMI control function of the TV and the devices that support the HDMI

control function.

For details on setting the HDMI control function, refer to the manual of each device.

b Turn off the TV.

The unit and devices are also turned off automatically with the TV’s operation. If they

do not turn off, turn them off manually.

c Turn on the TV.

The unit also turns on with the TV. If the unit does not turn on, turn it on manually.

d Change input video source on the TV to video signals from the unit.

e Turn on the playback devices, and then confirm the following:

Unit: Whether the input signals from the playback devices are selected as the HDMI

input source (any of “HDMI 1-4”). When it is not selected, select the correct input

source manually.

TV: Whether the video signals from the playback devices are displayed on the TV

screen.

f Confirm whether the unit is linked with operations of the TV remote control as follows:

Turning on/standby, volume control and selecting audio output devices.

If these operations are not available, check that “HDMI Control” (p.69) in the “Setup”

menu is set to “On.”

• If playing back audio source by using the ARC function has a problem, set “ARC” in the “Setup” menu

to “Off,” and connect the TV and the unit with an optical cable (p.18).

• If the HDMI control function does not work correctly, it may be effective to turn off the devices to reset

them or plug in the power cable and retry with the power cable plugged in.

• If the power-on operation is not linked, confirm the priority of audio output settings for the TV.

All settings have been completed.

When a TV program is selected with the TV remote control, input source of the unit is

switched to “AV4” automatically, and TV sound is output.

If it does not work correctly, confirm that the “ARC” in the “Setup” menu is set to “On.”

• “AV4” is selected as the input sound source from a TV as the default setting. When the AV4 jack is

used for another device, select an input jack to be used for the TV audio in “TV Audio Input” on the

“Setup” menu. Also, when using the SCENE functions (p.32), register the appropriate input source on

SCENE (TV).

RETURN

VOLUME

ENTER

TOP

POP UP

DISPLAY

OPTION

SETUP

RETURN

OLUME

POP UP

DISPL

OPTION

SETUP

ENTER

URN

DIS

Cursor keys

1 2 3

Connecting a TV

4 5 6 7 8

En 18

■ Connection method 2

Connect a TV to the unit with an HDMI cable and an optical cable.

• The following connection and steps are supplied, supposing the “HDMI” in the “Setup” menu has not been

changed from the default setting (p.69).

• By connecting a TV to the unit with an HDMI cable, each function for the unit can be configured while

viewing the TV monitor (p.60).

• If your playback device is connected to the analog video input jacks (COMPONENT VIDEO or VIDEO), you

also need to connect the TV to the MONITOR OUT (COMPONENT VIDEO or VIDEO) jack with an analog

video cable (p.20).

Necessary setting

To use the HDMI control function, the following settings are required in advance.

1 After connecting external devices (TV, playback devices, etc.) and AC

power cable, turn on the unit, TV and playback devices.

2 Configure the settings for HDMI Control.

a Activate the HDMI control function of the TV and the devices that support the HDMI

control function.

For details on setting the HDMI control function, refer to manual of each device.

b Select the input source of the TV to the video input from the HDMI OUT jack of the

unit.

c Press SETUP.

d Press the cursor keys ( / ) to select “HDMI.”

e Press the cursor keys ( / ) to select “HDMI Control,” and then press ENTER.

f Press the cursor keys ( / ) to select “On,” and then press ENTER.

g Press SETUP.

h Turn off the TV.

The unit and devices are also turned off automatically with the TV’s operation. If they

do not turn off, turn them off manually.

i Turn on the TV.

The unit also turns on. If the unit does not turn on, turn it on manually.

j Change input video source on the TV to video signals from the unit.

(HDMI Control -compatible TV)

DOCK

HDMI 1

(BD/DVD)

75Ω

MONITOR OUT

AM FM

ANTENNA

VIDEO

AV 1

OPTICAL

AV 2 AV 3 AV 5 AV 6

OUT

AUDIO

MONIT

COAXIAL COAXIAL

(CD)

COMPONENT

VIDEO

HDMI OUT

AV 4

(TV)

OPTICAL

ARC

HDMI

HDMI OUT

ARC

HDMI

AUDIO1

AV 6

OUT

AV 4

(

)

OPTICAL

HDMI

The unit (rear)

HDMI OUT jack

HDMI input

Audio output

(Digital optical)

AV4 (OPTICAL) jack

RETURN

VOLUME

ENTER

TOP

POP UP

DISPLAY

OPTION

SETUP

RETURN

OLUME

POP UP

DISPL

OPTION

SETUP

ENTER

URN

DIS

Cursor keys

Continues to the

1 2 3

Connecting a TV

4 5 6 7 8

En 19

k Turn on the playback devices, and then confirm the following:

Unit: Whether the input signals from the playback devices are selected as the HDMI

input source (any of “HDMI 1-4”). When it is not selected, select the correct input

source manually.

TV: Whether the video signals from the playback devices are displayed on the TV

screen.

l Confirm whether the unit is linked with operations of the TV remote control as follows:

Turning on/standby, volume control and selecting audio output devices.

If these operations are not available, confirm that “HDMI Control” in the “Setup” menu

is set to “On.”

All settings have been completed.

When a TV program is selected with the TV’s remote control, the input source of the

unit is switched to “AV4” automatically, and TV sound is output.

When these operations are not linked, confirm that “HDMI Control” in the “Setup”

menu is set to “On.”

• When the HDMI control function does not work correctly, it may be effective to turn off the devices to

reset or plug in the power cable and retry with the power cable plugged in.

• If the power-on operation is not linked, confirm the priority of audio output settings for the TV.

• “AV4” is selected as input sound source from a TV as the default setting. When the AV4 jack is used

for another device, select an input jack to be used for the TV audio in “TV Audio Input” of the “Setup”

menu. Also, when using the SCENE functions (p.32), register the appropriate input source for SCENE

(TV).

■ Connection method 3

Connect a TV to the unit with an HDMI cable and an optical cable.

By switching input source into “AV4” with AV4 key on the remote control or SCENE. TV

sound is output from the unit.

• By connecting a TV to the unit with an HDMI cable, each function for the unit can be configured while

viewing the TV monitor (p.60).

• If your playback device is connected to the analog video input jacks (COMPONENT VIDEO or VIDEO), you

also need to connect the TV to the MONITOR OUT (COMPONENT VIDEO or VIDEO) jack with an analog

video cable (p.20).

• When the AV4 jack is used for another device, or another terminal, except when an OPTICAL jack (with an

optical cable) is used for inputting TV sound, select another jack (any of AV 1-6 or AUDIO) for the

connection. Also, set the input sources setting of SCENE (TV) (p.32).

(TV with HDMI input jacks)

DOCK

HDMI 1

(BD/DVD)

75Ω

MONITOR OUT

AM FM

ANTENNA

VIDEO

AV 1

OPTICAL

AV 2 AV 3 AV 5 AV 6

OUT

AUDIO

MONIT

COAXIAL COAXIAL

(CD)

COMPONENT

VIDEO

HDMI OUT

AV 4

(TV)

OPTICAL

ARC

HDMI

AUDIO1

AV 6

OUT

AV 4

(

)

OPTICAL

HDMI

HDMI OUT

ARC

HDMI

The unit (rear)

HDMI OUT jack

HDMI input

Audio output

(Digital optical)

AV4 (OPTICAL) jack

1 2 3

Connecting a TV

4 5 6 7 8

En 20

■ Connection method 4

The video signals input from the playback device to the analog video input jacks

(COMPONENT VIDEO or VIDEO) are output from the same type of the MONITOR OUT

jack to the TV.

Connect the TV to the MONITOR OUT jack of the same type as the analog video input

jacks connected to the playback device, depending on the input jack on the TV.

By switching the input source to “AV4” with AV4 on the remote control or SCENE (TV),

TV sound is output from the unit.

• When connecting to a TV with a cable, other than an HDMI cable, operations with TV screen (such as the

setting of the unit, operations of iPod/USB devices) are not available.

• When the AV4 jack is used for another device, or another terminal, except for an OPTICAL jack (with an

optical cable), is used for inputting TV sound, select another jack (any of AV1-6 or AUDIO) for the

connection. Also, set the input sources setting of SCENE (TV) (p.32).

COMPONENT VIDEO connection (with a component cable)

VIDEO connection (with a video pin cable)

DOCK

HDMI 1

(BD/DVD)

75Ω

AM FM

ANTENNA

VIDEO

AV 1

OPTICAL

AV 2 AV 3 AV 5 AV 6

OUT

AUDIO

MONIT

COAXIAL COAXIAL

(CD)

HDMI OUT

ARC

MONITOR OUT

COMPONENT

VIDEO

AV 4

(TV)

OPTICAL

AUDIO1

AV 6

OUT

AV 4

(

)

OPTICAL

COMPONENT

VIDEO

MONITOR OUT

COMPONENT

VIDEO

The unit (rear)

MONITOR OUT

(COMPONENT VIDEO) jack

Audio output

(Digital optical)

AV4 (OPTICAL) jack

Video input

(Component video)

DOCK

HDMI 1

(BD/DVD)

HDMI 2

75Ω

MONITOR OUT

AM FM

ANTENNA

VIDEO

AV 1

OPTICAL

AV 2 AV 3 AV 4 AV 5 AV 6

OUT

AUDIO

COAXIAL COAXIAL

(CD) (TV)

OPTICAL

COMPONENT

VIDEO

HDMI OUT

ARC

MONITOR OUT

VIDEO

MONITOR OUT

AV 4

(TV)

OPTICAL

AUDIO1

AV 6

OUT

AV 4

(

)

OPTICAL

The unit (rear)

MONITOR OUT

(VIDEO) jack

Video input

(Analog video)

Audio output

(Digital optical)

AV4 (OPTICAL) jack

1 2 3

Connecting a TV

4 5 6 7 8

Sivu latautuu ...

Yamaha RX-V471 Omistajan opas

Brändi: Yamaha

Malli: RX-V471

Kategoria: AV receivers

Tyyppi: Omistajan opas

Lataa PDF

raportti

muilla kielillä

Türkçe: Yamaha RX-V471 El kitabı
English: Yamaha RX-V471 Owner's manual
svenska: Yamaha RX-V471 Bruksanvisning
русский: Yamaha RX-V471 Инструкция по применению
italiano: Yamaha RX-V471 Manuale del proprietario
Deutsch: Yamaha RX-V471 Bedienungsanleitung
dansk: Yamaha RX-V471 Brugervejledning
français: Yamaha RX-V471 Le manuel du propriétaire
Nederlands: Yamaha RX-V471 de handleiding
română: Yamaha RX-V471 Manualul proprietarului

Yamaha RX-V471 Omistajan opas

Yamaha RX-V471 Omistajan opas

muilla kielillä

Liittyvät paperit

Muut asiakirjat