ULTIMATE SPEED KH 4106 Operating Instructions Manual

KOMPERNASS GMBH · BURGSTRASSE 21

D-44867 BOCHUM

www.kompernass.com

ID-Nr.: KH 4106 - 11/09-V1

3

MINI COMPRESSOR

KH 4106

MINI COMPRESSOR

Operating instructions

MINIKOMPRESSORI

Käyttöohje

MINI-KOMPRESSOR

Betjeningsvejledning

ΜΙΝΙ ΚΟΜΠΡΕΣΕΡ ΑΕΡΟΣ

Οδηγίες χρήσης

MINI-KOMPRESSOR

Bedienungsanleitung

MINIKOMPRESSOR

Bruksanvisning

CV_KH4106_DIE45580_LB3 17.11.2009 9:42 Uhr Seite 1

















CV_KH4106_DIE45580_LB3 17.11.2009 9:42 Uhr Seite 4

CONTENT PAGE

1. Safety instructions 2

2. Utilisation 5

3. Package contents 5

4. Technical data 6

5. Operating elements 6

6. Preparing the Mini Compressor for use 7

7. Using the Mini Compressor 7

8. Storing the Mini Compressor 10

9. Cleaning the Mini Compressor 11

10. Disposal 11

11. Warranty & Service 12

12. Importer 13

1

Read these operating instructions carefully before using the appliance

for the first time and preserve this maual for later reference. Pass this

manual on to whoever might acquire the appliance at a future date.

IB_KH4106_DIE45580_LB3 17.11.2009 9:46 Uhr Seite 1

2

MINI COMPRESSOR KH 4106

1. Safety instructions

Danger!

Should water or moisture penetrate into the Mini Compressor, …

• there is the danger of receiving an electric shock!

• it could be irreparably damaged!

Thus:

Do not use or store the Mini Compressor …

• in humid environments!

• in close proximity to water! Additionally, never subject the

Mini Compressor to spraywater or rain.

Also, do not place any water-filled receptacles onto the Mini-

Compressor!

Extreme heat effects can lead to the overheating of the Mini Compressor

and to the meltdown of plastic parts. Through this the Mini Compressor

could be irreparably damaged, and there is the additional risk of fire!

IB_KH4106_DIE45580_LB3 17.11.2009 9:46 Uhr Seite 2

3

Thus:

• Do not place the Mini Compressor in close proximity to heat

sources.

• Do not place unprotected open flame sources – e.g. burning

candles – on the Mini Compressor!

• Do not leave the Mini Compressor in a vehicle if there are high

outdoor temperatures. Especially in summer the temperature inside

a vehicle can become extremely high.

• Do not cover the ventilation openings of the Mini Compressor!

Therefore, do not place the Mini Compressor on blankets or other

textiles etc.

• Take note that the Mini Compressor is not suitable for constant

operation. Thus do permit the Mini Compressor to be switched on

without a break for periods in excess of 10 minutes. Allow it to cool

down for at least 30 minutes before switching it back on.

• The Mini Compressor should not be used or stored in dusty environ-

ments. Dust could penetrate into the Mini Compressor. Should large

amounts of dust penetrate into the Mini Compressor it could overheat

and be irreparably damaged. There is also a danger of fire!

Never attempt to repair the power cable yourself in the case of a

defect! There is the danger of an electric shock! Instead, approach

one of our service partners.

IB_KH4106_DIE45580_LB3 17.11.2009 9:46 Uhr Seite 3

4

Always check the maximum permitted air pressure for the object to be

inflated! For this, consult the operating instructions and safety information

supplied with the object to be inflated. Additionally, when inflating

objects with the Mini Compressor always take note of the mamometer

on the Mini Compressor. Should the object be inflated beyond the

maximum permitted air pressure it could burst. There is then the danger

of serious physical injury! Also, take precautions that the Mini Compressor

cannot be used by children without supervision!

Caution!

The Mini Compressor could be irreparably damaged if it falls or is

dropped! Therefore always place the Mini Compressor on a stable,

level and non-slip surface.

NOTE:

For damages resulting from …

• Opening the housing of the Mini Compressor

• attempted repairs made by non-qualified personnel

• improper utilisation of the Mini Compressor

no liability or warranty will be accepted!

The Mini Compressor becomes warm when it is switched on. This is not

a cause for concern and is not an indication of a technical problem.

IB_KH4106_DIE45580_LB3 17.11.2009 9:46 Uhr Seite 4

5

2. Utilisation

The Mini Compressor is suitable exclusively for…

• the inflation of objects with a valve (e. g. tyres, balls etc.).

• measuring the air pressure of inflated objects.

• for operation on the 12-V circuit of vehicles via the cigar lighter.

• for domestic, non-commercial use.

3. Package contents

• Mini Compressor

• 3 Adapter sets for various valve types

• Operating manual

NOTE:

The connector valve

r

of the Mini Compressor is suitable for the

inflation of tyres with Schrader valves. For this you do not need to use

an additional valve adapter. For the inflation of bicycle tyres with valve

types …

• Sclaverand (also: French valves, Presta valves, inner-tube valves,

racing valves)

• Dunlop (also: Blitz valves, German valves)

you require the valve adapter for Schrader car valves. These are

available from specialist bicycle shops.

IB_KH4106_DIE45580_LB3 17.11.2009 9:46 Uhr Seite 5

6

4. Technical data

Operating voltage : 12 V DC

Current consumption: 6,5 A

Max. operating pressure: 17 bar /250 Psi

Continuous operating time: 10 Minutes

The CO Time (Continuous Operation Time) details how long an

appliance can be operated without the motor overheat-ing and

becoming damaged. After the appliance has run for this period it

must be switched off until the motor has cooled itself down.

5. Operating elements

q

Mini Compressor

w

Manometer display …

• bar resp. kg/cm2 (inner, yellow scale)

• psi (outer, white scale)

e

Airline

r

Connection valve with fastening lever

t

Power cable

y

Turn switch (Mini Compressor on/off)

u

Cigar lighter plug

i

Adaptor sets for various valve types.

IB_KH4106_DIE45580_LB3 17.11.2009 9:46 Uhr Seite 6

7

6. Preparing the Mini Compressor for use

Remove the Mini Compressor and the Adapter sets

i

from the

packaging. Unwind the power cable

t

to its full length.

The Mini Compressor is now ready for use.

7. Using the Mini Compressor

7.1 Using the Mini Compressor to inflate objects

1. Remove the cigar lighter from its holder in the vehicle.

NOTE:

Should the interior of the cigar lighter holder be soiled (e.g. with tobacco

shreds or ash): Clean it with a non-con-ducting object before inserting

the cigar lighter plug

u

. Otherwise it could cause a malfunction in the

operation of the Mini Compressor. Ideal would be a small brush, cotton

buds or something similar. Under no circumstances use anything metallic!

Danger!

Also, do not insert your fingers into the cigar lighter holder!

Should you do so, you may receive an electrical shock!

IB_KH4106_DIE45580_LB3 17.11.2009 9:46 Uhr Seite 7

8

2. Insert the cigar lighter plug

u

firmly into the cigar lighter holder in

the vehicle.

3. Check to see if an adaptor is required for use on the object to be

inflated. Should this be the case: Press resp. screw the required

adaptor into the opening of the connection valve

r

.

4. Check to ensure that the fastening lever of the connection valve

r

is open. When open, the fastening lever is in a vertical position.

5. Press the opened connection valve

r

onto the valve of the object

to be inflated. Press it down so that it is firmly seated. Should you be

using one of the adaptors

i

: Press the connection valve with the

adaptor into the valve of the object to be inflated.

6. Close the connection valve

r

, in that the fastening lever is pressed

down. Continue to firmly hold the connection valve down. Ensure

that the connection valve cannot disconnect itself from the valve of

the object being inflated.

IB_KH4106_DIE45580_LB3 17.11.2009 9:46 Uhr Seite 8

9

7. Switch on the vehicle ignition should this be necessary for the cigar

lighter to function. In case of query, consult the operating handbook

for the vehicle.

8. Firmly hold the object to be inflated. If necessary, obtain assistance

from a second person.

9. Twist the turn switch

y

in a clockwise direction until

it audibly engages. The Mini Compressor now starts to run. Check

the continually rising air pressure on the mamometer

w

of the Mini

Compressor.

10.As soon as the desired air pressure is displayed on the mamometer

w

: Switch the Mini Compressor off. Twist the turn switch

y

this

time in an anti-clockwise direction until it audibly engages.

11.Remove the cigar lighter plug

u

from the cigar lighter holder in the

vehicle. If necessary, switch off the vehicle ignition.

12.Open the fastening lever of the connection valve

r

in that it is pushed

into a vertical position. Pull the connection valve (complete with the

adaptor, if one has been used) from the valve of the inflated object.

IB_KH4106_DIE45580_LB3 17.11.2009 9:46 Uhr Seite 9

10

Turn the connection valve back and forth to make it easier to remove.

When removing the connection valve air can escape from the valve of

the object that has been inflated. Therefore ensure that the connection

valve is removed as quickly as possible.

7.2 Using the Mini Compressor to measure inflation

pressure

NOTE:

For measuring the pressure of an inflated object the Mini Compressor

does not require electricity.

1. Follow steps 3 to 6 in chapter 7.1 „Using the Mini Compressor to

inflate objects“.

2. Read off the inflation pressure on the mamometer

w

of the

Mini Compressor.

3. To conclude, follow step 12 in chapter 7.1 „Using the

Mini Compressor to inflate objects“.

8. Storing the Mini Compressor

Always store the Mini Compressor at a clean and dry location.

To avoid damage, make sure that the air line

e

and the power cable

t

are not folded.

IB_KH4106_DIE45580_LB3 17.11.2009 9:46 Uhr Seite 10

11

9. Cleaning the Mini Compressor

Caution:

Ensure that moisture cannot penetrate into the Mini Compressor!

Danger of Electrocution!

• Clean the housing of the Mini Compressor with a lightly moist cloth.

10. Disposal

Do not dispose of the appliance in your normal domestic

waste. This product is subject to the European guideline

2002/96/EC.

Dispose of the appliance through an approved dis-posal centre or at your

community waste facility. Observe the currently applicable regulations.

In case of doubt, please contact your waste disposal centre.

Dispose of all packaging materials in an environmentally

responsible manner.

IB_KH4106_DIE45580_LB3 17.11.2009 9:46 Uhr Seite 11

12

11. Warranty & Service

The warranty for this appliance is for 3 years from the date of purchase.

The appliance has been manufactured with care and meticulously exa-

mined before delivery. Please retain your receipt as proof of purchase.

In the event of a warranty claim, please make contact by telephone

with our Service Department. Only in this way can a post-free despatch

for your goods be assured.

The warranty covers only claims for material and maufacturing defects,

but not for transport damage, for wearing parts or for damage to fragile

components, e.g. buttons or batteries. This product is for private use

only and is not intended for commercial use. The warranty is void in the

case of abusive and improper handling, use of force and internal tam-

pering not carried out by our authorized service branch. Your statutory

rights are not restricted in any way by this warranty.

The warranty period will not be extended by repairs made unter

warranty. This applies also to replaced and repaired parts. Any damage

and defects extant on purchase must be reported immediately after

unpacking the appliance, at the latest, two days after the purchase

date. Repairs made after the expiration of the warranty period are

subject to payment.

IB_KH4106_DIE45580_LB3 17.11.2009 9:46 Uhr Seite 12

13

DES UK LTD

Tel.: 0871 5000 700

(£ 0.10 / minute)

e-mail: suppor[email protected]

Kompernass Service Ireland

Tel: 1850 930 412 (0,082 EUR/Min.)

Standard call rates apply. Mobile operators may vary.

e-mail: suppor[email protected]

12. Importer

KOMPERNASS GMBH

BURGSTRASSE 21

44867 BOCHUM, GERMANY

www.kompernass.com

IB_KH4106_DIE45580_LB3 17.11.2009 9:46 Uhr Seite 13

14

IB_KH4106_DIE45580_LB3 17.11.2009 9:46 Uhr Seite 14

15

Säilytä käsikirja myöhempää käyttöä varten. Jos myyt laitteen, anna

käsikirja uudelle omistajalle!

SISÄLLYSLUETTELO SIVU

1. Turvallisuusohjeet 16

2. Käyttö 19

3. Toimituslaajuus 19

4. Tekniset tiedot 20

5. Osat 20

6. Pienoiskompressorin saattaminen

käyttövalmiiksi 21

7. Pienoiskompressorin käyttö 21

8. Pienoiskompressorin varastointi 24

9. Pienoiskompressorin puhdistaminen 25

10. Hävittäminen 25

11. Takuu & huolto 26

12. Maahantuoja 27

IB_KH4106_DIE45580_LB3 17.11.2009 9:46 Uhr Seite 15

16

MINIKOMPRESSORI KH 4106

1. Turvallisuusohjeet

Vaara!

Jos pienoiskompressoriin pääsee kosteutta/vettä, …

• on olemassa sähköiskun vaara!

• laite saattaa vaurioitua käyttökelvottomaksi!

Siksi:

Älä käytä tai varastoi pienoiskompressoria ...

• kosteissa tiloissa!

• veden välittömässä läheisyydessä! Älä myöskään altista

pienoiskompressoria koskaan roiskevedelle tai sateelle.

Älä myöskään aseta pienoiskompressorin päälle mitään vedellä

täytettyjä astioita!

Voimakas lämpövaikutus saattaa aiheuttaa pienoiskompressorin yliku-

umenemista ja muoviosien sulamista. Tällöin pienoiskompressori saat-

taa vaurioitua käyttökelvottomaksi. Lisäksi on olemassa palovaara!

IB_KH4106_DIE45580_LB3 17.11.2009 9:46 Uhr Seite 16

17

Siksi

• Älä aseta pienoiskompressoria lämpölähteiden välittömään

läheisyyteen.

• Älä aseta pienoiskompressorin päälle mitään avoimia tulenlähteitä -

esim. palavia kynttilöitä!

• Älä jätä pienoiskompressoria autoon kuumalla ilmalla. Erityisesti

kesällä auton sisätilat saattavat kuumentua erittäin voimakkaasti.

• Älä peitä pienoiskompressorin tuuletusaukkoja! Älä aseta pienoi-

skompressoria siksi myöskään peittojen tai muiden tekstiilien jne.

päälle.

• Huomaa, ettei pienoiskompressoria ole tarkoitettu jatkuvaan

käyttöön. Älä anna pienoiskompressorin siksi käydä kerralla

pidempään kuin 10 minuutin ajan. Anna sen jäähtyä sen jälkeen

vähintään 30 minuuttia ennen sen käynnistämistä uudelleen.

• Älä käytä tai varastoi pienoiskompressoria pölyisissä tiloissa.

Muutoin pöly saattaa tunkeutua pienoiskompressoriin. Jos pienoi-

skompressoriin tunkeutuu suurempia määriä pölyä, se saattaa

ylikuumentua ja vaurioitua.

On olemassa tulipalon vaara!

Älä koskaan yritä korjata viallista virtajohtoa itse! On olemassa

sähköiskun vaara! Käänny sen sijaan huoltokumppanimme puoleen.

IB_KH4106_DIE45580_LB3 17.11.2009 9:46 Uhr Seite 17

18

Tarkasta puhallettavan esineen suurin sallittu ilmanpaine ennen täyttöä!

Katso neuvoa puhallettavan esineen käyttöohjeesta ja turvaohjeista.

Huomioi lisäksi pienoiskompressorilla ilmaa täytettäessä aina pienoi-

skompressorin ilmanpainenäyttö. Jos täytettävää esinettä täytetään sen

enintä sallittua ilmanpainetta enemmän, esine saattaa haljeta. Tällöin

on olemassa vakavien loukkaantumisten vaara! Huolehdi siksi myös

siitä, etteivät lapset käytä pienoiskompressoria ilman silmälläpitoa!

Varokaa!

Putoamiset ja pudottamiset saattavat vaurioittaa pienois-kompressorin

käyttökelvottomaksi! Aseta pienoiskompressori siksi aina lujille, tasaisille

ja liukumattomille pinnoille.

OHJE:

Emme vastaa vaurioista, joiden syynä on …

• pienoiskompressorin kotelon avaaminen

• muiden kuin pätevien ammattihenkilöiden suorittamat

korjausyritykset

• pienoiskompressorin tarkoituksenvastainen käyttö!

Pienoiskompressori lämpenee ollessaan kytkettynä päälle. Tämän

vuoksi ei kannata huolestua. Se ei tarkoita, että laitteessa olisi

jotakin vikaa.

IB_KH4106_DIE45580_LB3 17.11.2009 9:46 Uhr Seite 18

Sivu latautuu...

ULTIMATE SPEED KH 4106 Operating Instructions Manual

Tämä ohje sopii myös

ULTIMATE SPEED KH 4106 Operating Instructions Manual

muilla kielillä

Aiheeseen liittyviä papereita

Muut asiakirjat