Yamaha YAS-306 Omistajan opas

G

Front Surround System

Système Surround Frontal

Quick Start Guide

Guide de démarrage rapide

Schnellstartanleitung

Snabbuppstartsguide

Guida introduttiva

Guía de inicio rápida

Snelstartgids

Краткое руководство по началу работы

For more detailed information, refer to the Owner’s Manual on the

CD-ROM.

Caution: Do not attempt to play this CD-ROM in an audio player.

English

Pour de plus amples informations, reportez-vous au Mode d’emploi

qui se trouve sur le CD-ROM.

Attention : N’essayez pas de lire ce CD-ROM dans un lecteur

audio.

Français

Ausführlichere Informationen finden Sie in der Bedienungsanleitung

auf der CD-ROM.

Achtung: Versuchen Sie nicht, diese CD-ROM in einem

CD-Player abzuspielen.

Deutsch

För detaljerad information, se bruksanvisningen på CD-ROM-skivan.

Observera: Försök ej att spela upp denna CD-ROM-skiva på en

cd-ljudspelare.

Svenska

Per maggiori informazioni dettagliate fare riferimento al Manuale di

istruzioni sul CD-ROM.

Attenzione: non riprodurre il CD-ROM in un lettore audio.

Italiano

Para obtener más información, consulte el Manual de instrucciones

que encontrará en el CD-ROM.

Precaución: No intente reproducir este CD-ROM en un

reproductor de audio.

Español

Raadpleeg de gebruiksaanwijzing op de CD-ROM voor meer

gedetailleerde informatie.

Let op: probeer deze CD-ROM niet af te spelen in een

audiospeler.

Nederlands

Более подробная информация приведена в Инструкции по

эксплуатации на диске CD-ROM.

Предостережение: Не пытайтесь воспроизвести этот

CD-ROM на аудиоплеере.

Русский

2 En

1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for

future reference.

2 Install this sound system in a well ventilated, cool, dry, clean place - away from direct sunlight,

heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following

minimum clearances.

Top: 5 cm, Rear: 5 cm, Sides: 5 cm

3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming

sounds.

4 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit

in an environment with high humidity (i.e. a room with a humidifier) to prevent condensation

inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal

injury.

5 Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be

exposed to liquid dripping or splashing. On the top of this unit, do not place:

– Other components, as they may cause damage and/or discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal

injury.

– Containers with liquid in them, as they may fall and liquid may cause electrical shock to the

user and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat

radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or

personal injury.

7 Do not plug in this unit to a wall outlet until all connections are complete.

8 Do not operate this unit upside-down. It may overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall outlet, grasp the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used. Using this unit with a higher voltage than

specified is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will

not be held responsible for any damage resulting from use of this unit with a voltage other than

specified.

13 To prevent damage by lightning, keep the power cable and outdoor antennas disconnected from a

wall outlet or this unit during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact qualified Yamaha service personnel when any

service is needed. The cabinet should never be opened for any reasons.

15 When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power

plug from the wall outlet.

16 Be sure to refer to the “Troubleshooting” section of the Owner’s Manual on the CD-ROM for

common operating errors before concluding that this unit is faulty.

17 Before moving this unit, press A to set it to standby mode and disconnect the AC power plug from

the wall outlet.

18 Condensation will form when the surrounding temperature changes suddenly. Disconnect the

power cable from the outlet, then leave this unit alone.

19 When using this unit for a long time, this unit may become warm. Turn the power off, then leave

this unit alone for cooling.

20 Install this unit near the AC outlet and where the AC power plug can be reached easily.

21 The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. When you

dispose of batteries, follow your regional regulations.

22 Excessive sound pressure from earphones and headphones can cause hearing loss.

23 Keep the product out of reach of children to avoid them swallowing small parts.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

This unit is not disconnected from the AC power source as long as it is connected to the wall

outlet, even if this unit itself is turned off by A. This state is called the standby mode. In this

state, this unit is designed to consume a very small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT

TO RAIN OR MOISTURE.

Do not use this unit within 22 cm (9 inches) of persons with a heart pacemaker implant or

defibrillator implant.

Radio waves may affect electro-medical devices.

Do not use this unit near medical devices or inside medical facilities.

The name plate for YAS-306 is located on the bottom of the unit.

En 3

■ Notes on remote controls and batteries

• Do not spill water or other liquids on the remote control.

• Do not drop the remote control.

• Do not leave or store the remote control in the following conditions:

– places of high humidity, such as near a bath

– places of high temperatures, such as near a heater or stove

– places of extremely low temperatures

– dusty places

• Insert the battery according to the polarity markings (+ and -).

• Change all batteries if you notice the following conditions:

– the operation range of the remote control narrows

• If the batteries run out, immediately remove them from the remote control to prevent an explosion or

acid leak.

• If you find leaking batteries, discard the batteries immediately, taking care not to touch the leaked

material. If the leaked material comes into contact with your skin or gets into your eyes or mouth,

rinse it away immediately and consult a doctor. Clean the battery compartment thoroughly before

installing new batteries.

• Do not use old batteries together with new ones. This may shorten the life of the new batteries or

cause old batteries to leak.

• Do not use different types of batteries (such as alkaline and manganese batteries) together. Danger of

explosion may happen if batteries are incorrectly replaced. Specification of batteries may be different

even though they look the same.

• Before inserting new batteries, wipe the compartment clean.

• Keep batteries away from children. If a battery is accidentally swallowed, contact your doctor

immediately.

• When not planning to use the remote control for long periods of time, remove the batteries from the

remote control.

• Do not charge or disassemble the supplied batteries.

■ For U.K. customers

If the socket outlets in the home are not suitable for the plug supplied with this appliance, it

should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions

described below.

The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is

hazardous if engaged in a live socket outlet.

■ Special Instructions for U.K. Model

Information for users on collection and disposal of old equipment and used

batteries:

These symbols on the products, packaging, and/or accompanying documents mean that

used electrical and electronic products and batteries should not be mixed with general

household waste.

For proper treatment, recovery and recycling of old products and used batteries, please

take them to applicable collection points, in accordance with your national legislation.

By disposing of these products and batteries correctly, you will help to save valuable

resources and prevent any potential negative effects on human health and the environment

which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products and batteries, please

contact your local municipality, your waste disposal service or the point of sale where you

purchased the items.

Information on Disposal in other Countries outside the European

Union:

These symbols are only valid in the European Union. If you wish to discard these items,

please contact your local authorities or dealer and ask for the correct method of disposal.

Note for the battery symbol (bottom two symbol examples):

This symbol might be used in combination with a chemical symbol. In this case it

complies with the requirement set by the EU Battery Directive for the chemical involved.

Note

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE

FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond with the

coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the terminal which is marked with the

letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the

terminal which is marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth terminal of the three pin plug.

To view the Owner’s Manual, click on “English” in the screen displayed automatically when you

insert the CD-ROM into your PC, or click on the model name if the screen to select models is

displayed, and then click on “English” in the next screen. Then, follow the onscreen instructions.

If the screen is not displayed automatically, open the “index.html” in the CD-ROM.

The Owner’s Manual contained in the CD-ROM can be downloaded from the following website:

URL : http://download.yamaha.com/

4 En

Contents

PREPARATION

Supplied items .......................................................................5

Part names and functions .....................................................6

Installation .............................................................................8

Connecting the unit...............................................................9

Connecting the unit to a TV ..............................................................................9

Connecting the unit to other devices......................................................... 10

PLAYBACK

Operations........................................................................... 11

NETWORKS

Networks ............................................................................. 15

Network functions and the MusicCast CONTROLLER app .................. 15

Connecting to a network ................................................................................ 15

SETTINGS

Using the TV’s remote control

to adjust the unit’s volume ................................................ 19

Clearing all learned commands.................................................................... 21

About this Quick Start Guide

This Quick Start Guide provides basic setup to use the unit and feature of the unit.

For more information, refer to Owner’s Manual in the supplied CD-ROM.

In this booklet, iOS and Android mobile devices are collectively referred to as “mobile

devices”. The specific type of mobile device is noted in explanations as needed.

NOTE

This indicates precautions for use of the product and its feature limitations.

HINT

This indicates supplementary explanations for better use.

PREPARATION ➤ Supplied items En 5

PREPARATION

Supplied items

Make sure you have received all of the following items.

Preparing the remote control

Peel off the protection sheet before use.

Operating range of the remote control

Operate the remote control within the range as shown below. When the unit is mounted

on a wall, point the remote control at the remote control sensor on the top panel (p.8).

The unit

Remote control Batteries x 2

(AAA, R03, UM4)

Optical digital audio cable

(1.5 m)

Mounting template

Use when mounting the unit on a wall. See page 9 in the Owner’s Manual.

Spacers × 2

Use when mounting the unit

on a wall. See page 9 in the

Owner’s Manual.

Quick Start Guide

Cover (for the TV remote repeater)

See page 9 in the Owner’s Manual.

MusicCast

Setup Guide

Owner’s Manual

CD-ROM

Remote control sensor

Within 6 m

6 En PREPARATION ➤ Part names and functions

Part names and functions

The unit (front panel/top panel)

1 Indicators

The indicators on the top panel flash or glow, to show

the operation and setting status.

In this manual, illustrations of the nine in-line

indicators are used for explanation as necessary.

Example: When the STATUS indicator glows, and

the indicator flashes

2 CONNECT key

Use to connect the unit to a network using the

MusicCast CONTROLLER app (p.16).

3 (input) key

Select an input source to be played back (p.11).

4 (mute) key

Mute the audio output. Press the key again to unmute

(p.12).

5 / (volume +/-) keys

Adjust the volume (p.12).

6 (power) key

Turn on or off the unit (p.11).

HINT

• The unit may automatically turn off when the auto power

standby function is enabled (p.29 in the Owner’s Manual).

7 Remote control sensors

Receive infrared signals from the remote control of

the unit (p.5) or TV’s remote control (p.8).

The remote control sensors are located on the front

panel and on the top panel of the unit (p.8).

8 Dual built-in subwoofers

The built-in subwoofers are located in the top part of

the unit.

9 Speakers

9

8

7

8

9

STATUS TV BD/DVD ANALOG NET SURROUNDBLUETOOTH

CONNECT

1

234 5 6

Keys are located in the rear

part of the unit.

: Off : Glows : Flashes

PREPARATION ➤ Part names and functions En 7

The unit (rear panel)

1 Power cable

For connecting to an AC wall outlet (p.9).

2 TV remote repeater

Used to transmit signals from the TV’s remote

control, received by the unit’s remote control sensor,

to the TV (p.8).

3 TV input jack

For connecting to a TV with an optical digital audio

cable (p.9).

4 BD/DVD input jack

For connecting to a playback device, such as a Blu-

ray Disc (BD) player, with a coaxial digital audio

cable (p.10).

5 NETWORK jack

For connecting to a network with a network cable

(p.15).

6 ANALOG input jacks

For connecting to an external device with a stereo

cable (p.9, 10).

7 SUBWOOFER OUT jack

For connecting to an external subwoofer with an RCA

mono cable (p.29 in the Owner’s Manual).

8 SERVICE ONLY jack

Used only for after-sales servicing. This jack is not

normally used.

TV BD/DVD

NETWORK ANALOG

R

SUBWOOFER OUT

SERVICE ONLY

L

34 5 6 7 8

21

8 En PREPARATION ➤ Installation

Installation

The unit can be installed on a TV stand or mounted on a wall.

It is equipped with remote control sensors positioned to support installation on a TV stand or mounting on a wall.

Installing the unit on a TV stand, etc.

Position the unit so that the keys are on the far side of the unit.

About the TV remote repeater

The unit receives signals from the TV’s remote control via the remote control sensor

located on the front panel. It then transmits these signals from the TV remote repeater

located on the rear panel. See page 8 in the Owner’s Manual for more information.

Mounting the unit on a wall

Mount the unit on the wall so that the keys face upwards. Follow the instructions

on page 9 in the Owner’s Manual when mounting the unit on a wall.

Cautions

• Do not stack the unit and a BD player

or other device directly on each other.

Doing so may cause a malfunction

due to vibrations.

• Do not hold the speaker portion

(fabric parts) on the front and the top

of the unit.

• The unit contains non-magnetic

shielding speakers. Do not place

magnetically sensitive items (hard

disk drive, etc.) near the unit.

• Depending on your installation

environment, it may be better to

connect the unit and external devices

before installing the unit.

Remote control sensor (front panel)

Keys

TV remote repeater

TV’s remote control

More than 5 cm

TV remote control sensor

Caution

• When mounting the unit on a wall, all

installation work must be performed

by a qualified contractor or dealer.

The customer must never attempt to

perform this installation work.

Improper or inadequate installation

could cause the unit to fall, resulting

in personal injury.

Keys

Remote control sensor

(top panel)

PREPARATION ➤ Connecting the unit En 9

Connecting the unit

The way in which the unit is connected will vary depending upon the type of jacks with

which the TV or playback devices (BD/DVD player, etc.) are equipped, and how the TV

and playback devices are connected. Refer to the connection examples on pages 9 and

10 to connect the unit.

1 Be sure that the unit’s power cable is not plugged into an AC wall

outlet.

2 Refer to the connection examples on pages 9 and 10 to connect the

unit to a TV and playback devices.

To connect the unit using the supplied optical digital audio cable, remove the cap,

confirm orientation, and then plug it firmly into the TV input jack.

HINT

• Connect the supplied optical digital audio cable to the TV input jack, a coaxial digital audio cable to

the BD/DVD input jack, and a stereo cable to the ANALOG input jacks.

3 Plug the unit’s power cable into an AC wall outlet.

4 Set TV volume as low as possible, or disable output from the TV’s

built-in speaker(s).

HINT

• If a setting to disable the speaker output is not available on your TV in step 4, you may disable it by

connecting headphones to the headphones jack on the TV. For details, refer to the manuals of the TV.

• The TV and BD/DVD input jacks support the following audio signals.

− PCM (2 channel)

− Dolby Digital (up to 5.1 channel)

− DTS Digital Surround (up to 5.1 channel)

Connection method 1: Connect the unit to a TV

If the TV has an optical audio output jack

Connect one end of the supplied optical digital audio cable to the unit’s TV input jack,

and the other to the optical digital audio output jack on the TV.

If the TV has no optical audio output jack

Use an optional stereo cable to connect the unit’s ANALOG input jacks to the analog

audio output jacks on the TV.

To watch TV or play content from other devices

Caution

Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug or

terminal.

Connecting the unit to a TV

Change the

TV's input

source

When watching

TV

Switch to the input source for watching TV (select

the same input source used before the unit was

connected to the TV).

When playing

content from a

device

Switch to the input source for the BD/DVD player

or other device.

Select the unit’s input source

Press the input keys on the unit's remote control

to change the unit’s input source.

: :

NOTE

• When sound from the TV cannot be output in a digital

audio format (Dolby Digital or DTS Digital Surround), be

sure that the TV’s digital audio output is set to PCM

(2ch).

A

B

A

B

TV BD/DVD

NETWORK ANALOG

R

SUBWOOFER OUT

L

TV

Optical digital audio

output

or

Analog audio output

(red/white)

(supplied)

HDMI input HDMI output

Playback device

(such as a BD/DVD player)

A

B

10 En PREPARATION ➤ Connecting the unit

Connection method 2: Connect the unit to a playback device

(BD/DVD player, etc.)

Use this method to connect the unit to a playback device when it cannot be connected to

the TV as explained with method 1 because the TV has no optical digital audio output

jack or analog audio output jacks.

This method can also be used to connect the unit to a playback device, after it has been

connected to the TV, when sound from a BD/DVD player or other device connected to

the TV is not output as surround sound.

If the playback device has an optical digital audio output jack

Connect one end of the supplied optical digital audio cable to the unit’s TV input jack,

and the other to the optical digital audio output jack on the playback device.

If the playback device has no optical digital audio output jack

Connect one end of an optional coaxial digital audio cable to the unit’s BD/DVD input

jack, and the other to the coaxial digital audio output jack on the playback device.

To watch video from a playback device connected to the TV

Connect devices such as CD/DVD players or game consoles to the unit for dynamic

sound playback. Use an optical digital audio cable, coaxial digital audio cable, or stereo

cable to connect audio output jack(s) on each playback device to input jack(s) on the

unit.

To watch video from an external device

Change the TV's input

source

Switch to the input source for the BD/DVD player or

other playback device connected to the TV.

Select the unit’s input

source

Press the input keys on the unit's remote control to

change the unit’s input source.

: :

A

B

A

B

TV BD/DVD

NETWORK ANALOG

R

SUBWOOFER OUT

L

Playback device

(such as a BD/DVD player)

Optical digital audio

output

or

Coaxial digital audio

output (orange)

(supplied)

A

B

Connecting the unit to other devices

Change the TV's input

source

Switch to the input source for the external device.

Select the unit’s input

source

To play sound from an external device, press the input

key (ANALOG, TV, or BD/DVD) that corresponds to the

jack(s) on the unit to which the external device is

connected.

NOTE

• When sound from the external device cannot be output in a

digital audio format (Dolby Digital or DTS Digital Surround), be

sure that the device’s digital audio output is not set to PCM

(2ch).

• If volume can be adjusted using the device connected to the

unit’s ANALOG input jacks, set that device's volume to the

same level as that of other devices connected to the unit’s TV

and BD/DVD input jacks to prevent volume from being louder

than expected.

TV BD/DVD

NETWORK ANALOG

R

SUBWOOFER OUT

L

CD/DVD player, game console, etc.

Optical digital audio

output

Coaxial digital audio

output (orange)

Analog audio output

(red/white)

PLAYBACK ➤ Operations En 11

PLAYBACK

Operations

Remote control signal transmitter

Transmits infrared signals.

(power) key

Turns on or off the unit.

Turned on

Turned off (network standby function enabled,

p.30 in the Owner’s Manual)

Turned off

HINT

• When the unit is turned on for the first time after purchase,

the indicator flashes slowly.

While the indicator is flashing, network settings from

your iOS device (an iPhone, etc.) can be applied to the unit

to connect the unit to a wireless network. For details on

settings, see “Playing back music with AirPlay” (p.24 in the

Owner’s Manual). Press any key on the remote control to

cancel this function if it will not be used.

The indicator does not flash if the unit’s NETWORK jack

is connected to a router using a cable (wired connection).

The indicator for the last input

source selected glows green.

Indicates the surround setting, and network

(p.15) or Bluetooth (p.16 in the Owner’s

Manual) connection status.

Glows (red)

1

Input keys

Select an input source to be played back.

TV......................TV audio or sound from a device

connected to the unit’s TV input jack

BD/DVD.............Sound from a device connected to

the BD/DVD input jack

ANALOG...........Sound from a device connected to

the ANALOG input jacks

BLUETOOTH ....Sound from a Bluetooth connected

device

NET ...................Audio acquired via a network

The last audio source listened to is

selected when the NET key is

pressed.

The indicator for the selected input source glows.

(Example: when TV is selected)

HINT

• To play sound from the device connected to the TV or to

watch video from the device, set the TV’s input source to the

playback device.

• For playback from a Bluetooth device, refer to page16 in the

Owner’s Manual. For audio playback via a network, refer to

pages 22 to 25 in the Owner’s Manual.

TV BD/DVD ANALOG NETBLUETOOTH

SURROUND and STEREO keys

Switch between surround and stereo (2 channels)

playback. When surround playback is selected, you

can enjoy a realistic sound effect using Yamaha’s

exclusive AIR SURROUND XTREME.

SURROUND........ Glows (surround playback)

STEREO.............. Off (stereo playback)

HINT

• Dolby Pro Logic II is used when 2-channel stereo signal is

played in surround.

• The TV PROGRAM, MOVIE, MUSIC, SPORTS, or GAME

surround mode can be selected using the MusicCast

CONTROLLER app (p.16) installed on a mobile device.

SURROUND

2

3

12 En PLAYBACK ➤ Operations

SUBWOOFER (+/-) keys

Adjust the volume of the subwoofer.

VOLUME (+/-) keys

Adjust the volume of the unit.

MUTE key

Mute the audio output. Press the key again to

unmute.

Volume down (–) Volume up (+)

Flash (on mute)

4

NET RADIO (1–3) keys

Assign audio input via a network (Internet radio

stations, music files stored on media servers, etc.)

to the NET RADIO key.

Assign a station

1 Play the desired Internet radio station (p.22

to 25 in the Owner’s Manual).

2 Hold down the NET RADIO 1, 2, or 3 key for

more than 3 seconds.

Tune-in to an assigned Internet radio station

1 Press the NET RADIO 1, 2, or 3 key to which

the desired Internet radio station has been

assigned.

HINT

• When an Internet radio station is assigned to the NET

RADIO 1, 2, or 3 key on the remote control, the same station

is also registered with No. 1, 2, or 3 in the MusicCast

CONTROLLER app’s “Favorites”. When an Internet radio

station is registered with No. 1, 2, or 3 in “Favorites” with the

MusicCast CONTROLLER app, the same station is also

assigned to the NET RADIO 1, 2, or 3 key on the remote

control.

5

PLAYBACK ➤ Operations En 13

BASS EXTENSION key

Enable/disable the bass extension function. When

this function is enabled, you can enjoy a powerful

bass sound with the Yamaha original bass boost

technology “Advanced Bass Extension

Processing.”

CLEAR VOICE key

Enable/disable the clear voice function.

When this function is enabled, human voices such

as lines in movies and TV shows, or news and

sport commentary, are played clearly.

AUDIO DELAY key

Adjust the audio delay to synchronize the sound

with the video when the video image on the TV

may seem delayed with respect to the sound.

Follow the procedure below to adjust the audio delay.

NOTE

• The audio delay cannot be adjusted in the following

situations.

− When Bluetooth or NET is selected as the input source.

− When sound is distributed from the unit to one or more

other MusicCast-enabled devices.

1 Hold down the AUDIO DELAY key for more

than 3 seconds.

The indicator at far left flashes.

2 Press the SUBWOOFER (+/-) key to adjust the

audio delay.

Pressing the SUBWOOFER (+) key delays the

audio output timing.

3 To finish the adjustment, press the AUDIO

DELAY key.

HINT

• The adjustment will be finished automatically if no

operations are performed for 20 seconds.

Enabled: Flashes three times and goes out

Disabled: Flashes once and goes out

Enabled: Flashes three times and goes out

Disabled: Flashes once and goes out

(–) (+)

6

14 En PLAYBACK ➤ Operations

8

9

HINT

• The unit is able to play the following types of audio signal.

The indicators do not glow when analog or PCM audio signal

is input.

− Analog signal

− PCM (2 channels)

− Dolby Digital

− DTS Digital Surround

DIMMER key

Change the brightness of the indicators. Each time

the key is pressed, the brightness of the indicators

changes as follows.

Dim (default setting) → Off → Bright

↑

Indicators glow brightly just after operation and

change to the specified brightness after a few

seconds.

INFO key

While the INFO key is held down, status, including

the type of audio signal being input and whether

the clear voice function is enabled or disabled, can

be confirmed by the glowing of indicators.

Type of audio signal being input

DTS Digital Surround

Dolby Digital

Dolby Pro Logic II is used (when 2-channel

stereo signal is played in surround)

Unit functions and positioning

The bass extension function is enabled

The clear voice function is enabled

When positioned on top of something, such as a TV stand

When mounted on a wall

Green

Blue

LEARN key

The unit enters learning mode, in which it can

learn TV remote control commands (p.19).

7

8

9

NETWORKS ➤ Network functions and the MusicCast CONTROLLER app En 15

NETWORKS

Networks

A network connection allows you to listen to Internet radio stations or music streaming

services, and to use AirPlay to play music files, or to play music files stored on your

computer (media server) via this unit.

Most playback requires the “MusicCast CONTROLLER” app for mobile devices. Install

and use the MusicCast CONTROLLER app on your mobile device to play music files.

Proceed from network connection to playback in the following sequence.



* AirPlay can be used to play music files without using the MusicCast CONTROLLER

app.

NOTE

• To use network function, the unit, your PC and mobile device must be connected to the same router.

• When using a multiple SSID router, access to the unit might be restricted depending on the SSID to

connect. Connect the unit and mobile device to the same SSID.

• Some security software installed on your computer, or network device settings (such as a firewall), may

block the unit’s access to your computer or Internet radio stations. Should this occur, change security

software and/or network device settings.

• A network connection cannot be established if the MAC address filter on your router is enabled. Check

your router’s settings.

• To configure your router’s subnet mask manually, apply the same subnet used by this unit to all devices.

• Use of a broadband connection is recommended when using Internet services.

• The unit cannot be connected to a network that requires manual setup. Connect the unit to a DHCP-

enabled router.

Choose a wired or wireless network connection based on your network environment.

Wired network connections

To use a wired network connection, connect the unit to a router via an STP network

cable (category 5 or higher straight cable; not supplied).

HINT

• If network connections or settings are changed, use the MusicCast CONTROLLER app to connect the unit

to a network and register the unit as a MusicCast-enabled device again (p.16).

Network functions and the MusicCast CONTROLLER

app

a Choose a wired network connection (p.15) or a wireless network connection

(p.16).

b Use the MusicCast CONTROLLER app to connect the unit to a network, and

register the unit as a MusicCast-enabled device (p.16).

c Use the MusicCast CONTROLLER app to play music over a network* (p.22 to 25

in the Owner’s Manual).

Connecting to a network

NETWORK

LAN

WAN

Internet

PC

Network cable

Modem

Mobile device

Router

Network Attached

Storage (NAS)

16 En NETWORKS ➤ Connecting to a network

Wireless network connections

Connect the unit to a wireless router (access point) to use a network.

Refer to the following for instructions on connecting to a wireless router (access point).

• Using the MusicCast CONTROLLER app (p.16)

• Applying iOS device (iPhone, etc.) settings to the unit (p.24 in the Owner’s Manual)

The indicator on the unit glows when the unit is connected to a wireless network.

NOTE

• If the unit and the wireless router (access point) are too far apart, the unit may not connect to a wireless

router (access point). In such case, place them close to each other.

Connecting with the MusicCast CONTROLLER app

(registering the unit as a MusicCast-enabled device)

Install the MusicCast CONTROLLER app on your mobile device to connect the unit to a

network and register it as a MusicCast-enabled device.

HINT

• Confirm that your mobile device is connected to your home router before beginning.

• This section uses MusicCast CONTROLLER app screens displayed in English on an iPhone as examples.

• MusicCast CONTROLLER app screens and menu labels are subject to change without prior notice.

1 Install the MusicCast CONTROLLER app on your mobile device, and

open the app.

Search for “MusicCast CONTROLLER” on the App Store or Google Play.

2 Tap “Setup”.

Internet

Wireless router (access point)

Modem

Mobile device

Glows (green)

NETWORKS ➤ Connecting to a network En 17

3 Turn on the unit, and then tap “Next”.

4 Hold down the CONNECT key until the indicator on the unit starts

flashing.

5 Follow the on-screen instructions to configure network settings.

HINT

• When a screen like that below is displayed, follow the on-screen instructions to configure network

settings.

• When a screen like that at left below is displayed, select the network to which the unit will be

connected and enter the router’s password (encryption key).

The router’s password (encryption key) is often noted on the router itself. Refer to documentation

supplied with the router for details.

1. Use the Home button on your mobile device to return

to the Home screen.

2. Select “Wi-Fi” from “Settings”.

3. Select “MusicCastSetup” from “CHOOSE A

NETWORK...”.

4. Use the Home button to return to the MusicCast

CONTROLLER app.

18 En NETWORKS ➤ Connecting to a network

6 To register the unit as a MusicCast-enabled device, configure the

following items.

• Location name (“home”, “John’s house”, etc.)

• Name and photo of the room where the unit is installed

The location name, and the name and photo of the room where the unit is installed

can be changed later.

Network connection with the MusicCast CONTROLLER app is now complete, and the

unit has been registered as a MusicCast-enabled device.

HINT

• If a different MusicCast-enabled device is already registered with the MusicCast CONTROLLER app, tap

(Setup) in the room selection screen, and then select “Add New Device” to add the unit to the app.

Tap

SETTINGS ➤ Using the TV’s remote control to adjust the unit’s volume En 19

SETTINGS

Using the TV’s remote control

to adjust the unit’s volume

The unit can be “taught” to read signals from a TV’s remote control. This allows the TV

and unit to be turned on or off simultaneously, or the volume to be adjusted, using the

TV’s remote control.

NOTE

• This function is available only if the TV’s remote control uses infrared (IR) signal. A remote control that

uses radio signals cannot be used.

1 Turn off the unit and the TV.

If the TV is on while the unit is learning TV remote control commands, light emitted

by the TV may interfere with the learning process.

2 Point the unit’s remote control at the appropriate remote control

sensor on the unit, and hold down the LEARN key for at least 3

seconds.

The unit will enter learning mode. The unit’s indicators will flash as shown below.

NOTE

• Only the TV’s remote control and the keys on the unit are used for steps 3 through 6. The unit’s

remote control is not used.

• If the unit has already learned functions, indicators will glow as follows.

Mute: BD/DVD

Volume (-): ANALOG

Volume (+): BLUETOOTH

Power: NET

If the unit is taught TV remote control commands by following steps 3 through 7, all previous learning

will be cleared. To prevent this, press the LEARN or (power) key on the unit’s remote control to

cancel learning mode.

• Learning takes place all at once. Be sure to teach the unit all necessary TV remote control

commands at once, as attempting to teach the unit additional commands later will clear all previous

learning.

For cable or satellite set-top box users

Use the TV’s remote control (not the remote control for the cable or satellite set-top

box) to teach the unit TV remote control commands.

Once the unit is taught TV remote control commands, the remote control for the cable

or satellite set-top box can be used to operate the unit.

Off

STATUS TV BD/DVD ANALOG NET SURROUNDBLUETOOTH

Green (when the unit is installed on a TV stand)

Blue (when the unit is mounted on a wall)

20 En SETTINGS ➤ Using the TV’s remote control to adjust the unit’s volume

3 Teach the unit the TV remote control’s “Mute” command.

3-1 Press the key on the unit.

3-2 Point the TV’s remote control at the remote control sensor on the unit, hold

down the mute key for at least 1 second, and then release it for at least 1

second. Perform this operation twice.

The position of the remote control sensor varies depending upon the installation of

the unit (p.8).

4

Teach the unit the TV remote control’s “Volume (–)” command.

4-1 Press the key on the unit.

4-2 Point the TV’s remote control at the remote control sensor on the unit, hold

down the volume (–) key for at least 1 second, and then release it for at least

1 second. Perform this operation twice.

5 Teach the unit the TV remote control’s “Volume (+)” command.

5-1 Press the key on the unit.

5-2 Point the TV’s remote control at the remote control sensor on the unit, hold

down the volume (+) key for at least 1 second, and then release it for at least

1 second. Perform this operation twice.

Result

Bleep/

buzzer

Indicators

Successfully

learned

Once

Failed to learn

Repeat from Step

3-1.

Twice

Troubleshooting the unit’s failure to learn commands

✓ Is the TV turned off?

✓ Is direct sunlight or fluorescent light striking the unit and interfering with operation?

✓ Are you using the TV's remote control for Steps 3 though 6? (The unit's remote control is not

used.)

✓ Are you using the remote control within the range indicated above?

✓ Are you holding down keys on the TV’s remote control for at least 1 second, and then releasing

them for at least 1 second?

If the unit fails to learn commands even after checking all of the above, hold down and release the

key on the TV’s remote control three times.

CONNECT

Indicators

Approx. 30 cm

TV’s remote control

Hold down

(for at least 1 second)

Release

(for at least 1 second)

Hold down

(for at least 1 second)

Release

Glows

Flash

Result

Bleep/

buzzer

Indicators

Successfully

learned

Once

Failed to learn

Repeat from Step

4-1.

Twice

Result

Bleep/

buzzer

Indicators

Successfully

learned

Once

Failed to learn

Repeat from Step

5-1.

Twice

CONNECT

Indicators

Glows

Flash

CONNECT

Indicators

Glows

Flash

Sivu latautuu ...

Yamaha YAS-306 Omistajan opas

Yamaha YAS-306 Omistajan opas

muilla kielillä

Liittyvät paperit

Muut asiakirjat