Ingersoll-Rand RX-264H Operation & Maintenance Manual

Operation & Maintenance Manual

UPRIGHT RAMMERS

Manuel de l'Opérateur et d'Entretien

PILONNEUSES VIBRANTES

Betriebs- und Wartungsanweisungen

STAMPFER

Manuale d’uso e manutenzione

PESTELLI

Manual de Utilización y Mantenimiento

PISONES

Bedienings- en Onderhoudshandleiding

TRILSTAMPERS

Manual de Operação e Manutenção

SALTÃO

Betjenings- & vedligeholdelsesvejledning

OPRETSTÅENDE STAMPERE

Käyttö- ja Huolto-ohjekirja

TÄRYJUNTILLE

Instruksjonsbok

STAMPERE

Drift- och underhållshandbok

STAMPERE

EN

FR

DE

IT

ES

NL

PT

DA

FI

NO

SV

RX-264H

RX-344H

RX-264H Serial No. JF3500

RX-344H LF3993

Revised (10-12)

Doosan purchased Bobcat Company from Ingersoll-Rand Company in

2007. Any reference to Ingersoll-Rand Company or use of trademarks,

service marks, logos, or other proprietary identifying marks belonging

to Ingersoll-Rand Company in this manual is historical or nominative

in nature, and is not meant to suggest a current affiliation between

Ingersoll-Rand C

ompany and Doosan

Company or the products of

e

ith

er.

RX-264H/RX-344H Upright Rammer

i-EN Operation & Maintenance Manual

EN

This manual should be used with all related supplemental books, engine and transmission manuals, and part books. Related

Service Bulletins should be reviewed to provide information regarding some of the recent changes. If any questions arise

concerning this publication or others, contact your local distributor for the latest available information. Contents of this

manual are based on information in effect at the time of publication and are subject to change without notice.

CONTENTS

INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ii

DECLARATION OF CONFORMITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii

SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv

SYMBOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

APPLICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

OPERATING INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

REFERENCE INFORMATION

Write the correct information for YOUR Ingersoll Rand Upright Rammer in the spaces below. Always use these numbers when referring

to your Ingersoll Rand Upright Rammer.

Upright Rammer Serial Number: ______________________________________________________________________________

Engine Serial Number: ______________________________________________________________________________________

NOTES: _________________________________________________________________________________________________

_________________________________________________________________________________________________________

YOUR INGERSOLL RAND

®

DEALER: _________________________________________________________________________

ADDRESS: _______________________________________________________________________________________________

_________________________________________________________________________________________________________

PHONE: _________________________________________________________________________________________________

Ingersoll Rand Company Ltd

Construction Technologies Division

501 Sanford Avenue

Mocksville, North Carolina

United States of America

Ingersoll Rand Company Ltd

Construction Technologies Division

Swan Lane

Hindley Green

Wigan WN2 4EZ

United Kingdom

RX-264H/RX-344H Upright Rammer

ii-EN Operation & Maintenance Manual

INTRODUCTION

EXCELLENT CHOICE! The Ingersoll Rand Upright Rammer you have chosen will give you many hours of maintenance free operation

resulting in a faster return of your investment.

Safe operation depends on reliable equipment and the use of proper operating procedures. Performing the checks and services

described in this manual will help keep your machine in good condition. These recommended operation procedures will help you to

avoid unsafe practices.

Safety notes have been included throughout this manual to help you avoid injury and prevent damage to the equipment. These notes

are not intended to cover all eventualities; it is impossible to anticipate and evaluate all possible methods of operation. Therefore,

you are the only person who can guarantee safe operation and maintenance.

It is important that any procedure not specifically recommended in this manual be thoroughly evaluated from the standpoint of safety

before it is implemented.

Continuing improvement and advancement of product design may cause changes to your machine which may not be included in this

publication. Each publication is reviewed and revised, as required, to update and include these changes in later editions. Ingersoll

Rand reserves the right to modify or make changes within a specific model group without notice and without incurring any liability to

retrofit units previously shipped from the factory. Contact your Ingersoll Rand Distributor for non-routine maintenance information that

is not covered in this publication.

INGERSOLL RAND COMPANY IS ISO 9001 CERTIFIED

ISO 9001 is a set of international standards that control the processes and procedures which we use to design, develop, manufacture,

distribute, and service Ingersoll Rand products.

Lloyd's Register Quality Assurance (LRQA) is the Certified Registrar Ingersoll Rand chosen to assess the Company’s compliance with

the ISO 9001 set of standards. The LRQA registration certifies that the European manufacturing plants and offices of Ingersoll Rand

(Hindley Green, United Kingdom; Les Clayes, France; Coslada, Spain; Zoeterwoude, Netherlands; Mulheim, Germany) are in

compliance with ISO 9001. Only certified assessors, like LRQA, can grant registrations.

ISO 9001 means that as a company we say what we do and do what we say. In other words, we have established procedures and

policies, and we provide evidence that the procedures and policies are followed.

RX-264H/RX-344H Upright Rammer

iii-EN Operation & Maintenance Manual

EN

DECLARATION OF CONFORMITY

Machine models represented in this manual may be used in various locations world-wide. Machines sold and shipped into

European common market countries requires that the machine display the EC Mark and conform to various directives. In such

cases, the design specification of this machine has been certified as complying with EC directives. Any modification to any part is

absolutely prohibited and would result in the CE certification and marking being rendered invalid. A declaration of that conformity

follows:

DECLARATION OF CONFORMITY WITH EC DIRECTIVES

98/37/EC, 2000/14/EC amended by 2005/88/EC, 2002/44/EC

We,

Ingersoll Rand Company Ltd

Portable Power Division

Swan Lane

Hindley Green

Wigan WN2 4EZ

United Kingdom

Declare that under our sole responsibility for manufacture and supply, the product(s)

Uprigth Rammers Type RX-264H and RX-344H

To which this declaration relates, is (are) in conformity with the provisions of the above directives using the following

principal standards EN12100, EN500-1 and EN500-4.

Issued at Hindley Green in January 2006

Peter Edgeller,

Technical Manager

CONFORMITY TO NOISE DIRECTIVE

2000/14/EC

Ingersoll Rand Company Limited declare that the following Upright Rammers have beenmanufactured in conformity

with the directive as shown.

Directive Machine Model Weigth Range

Mean Measured

Value

Guaranteed Level Notified Body

2000/14/EC

Annex VI Part 1

amended by

2005/88/EC

RX-264H 55 kg

102.99 L

WA

104 L

WA

SNCH,

Luxembourg

N°0499

RX-344H 72 kg

103.41 L

WA

104 L

WA

Issued at ............................ Hindley Green

1

st

Declaration: January 2006

Peter Edgeller,

Technical Manager

RX-264H/RX-344H Upright Rammer

iv-EN Operation & Maintenance Manual

SAFETY INSTRUCTIONS

Overview

Before you operate, maintain, or in any other way, use this

machine, read and study this manual. Know how to safety use

the compactor’s controls and what you must do for safe

maintenance.

BEFORE YOU OPERATE, MAINTAIN OR IN ANY OTHER

WAY, OPERATE THIS MACHINE:

• READ and STUDY this manual.

• KNOW how to safely use the unit’s controls and what you

must do for safe maintenance.

The machine has been built in accordance with state-of-the-art

standards and the recognized safety rules. Nevertheless, its

use may constitute a risk to life and limb of the user or of third

parties, or cause damage to the machine and to other material

property.

ALWAYS wear or use the proper safety items required for your

personal protection.

For reasons of security, long hair must be tied back or otherwise

secured, garments must be close-fitting and no jewellery – such

as rings – may be worn. Injury may result from being caught up

in the machinery or from rings catching on moving parts.

If you have ANY QUESTIONS about the safe use or

maintenance of this unit, ASK YOUR SUPERVISOR OR

CONTACT ANY Ingersoll Rand DISTRIBUTOR. NEVER

GUESS – ALWAYS CHECK.

Never make any modifications, additions or conversions which

might affect safety without the supplier’s approval. This also

applies to the installation and adjustment of safety devices and

valves as well as to welding work on load-bearing elements.

Observe all fire-warning and fire-fighting procedures.

Pre-start inspection

INSPECT your machine. Have any malfunctioning, broken or

missing parts corrected or replaced before use.

Check the machine at least once per working shift for obvious

damage and defects. Report any changes (incl. changes in the

machine’s working behaviour) to the competent organisation/

person immediately. If necessary, stop the machine immediately

and lock it.

Take the necessary precautions to ensure that the machine is

used only when in a safe and reliable state.

Operate the machine only if all protective and safety oriented

devices, such as removable safety devices, emergency shut-off

equipment, sound-proofing elements and exhausts, are in place

and fully functional.

The electrical equipment of machines is to be inspected and

checked at regular intervals. Defects such as loose connections

or scorched cables must be rectified immediately.

VERIFY that all the instruction and safety labels are in place

and readable. These are as important as any other equipment

on the compactor.

NEVER fill the fuel tank, with the engine running, while near an

open flame, or when smoking. ALWAYS wipe up any spilled fuel

immediately.

CHECK for WARNING tags placed on the machine. DO NOT

operate the equipment until repairs have been made and the

WARNING tags are removed by authorized personnel.

KNOW the location of the Emergency Shut-Down Control if the

machine is so equipped.

Operating

In the event of safety-relevant modifications or changes in the

behaviour of the machine during operation, stop the machine

immediately and report the malfunction to the competent

authority/person.

Always wear the prescribed ear protectors.

Always make sure that no person or obstruction is in your line of

travel. Watch your step to avoid tripping.

USE extreme caution and be observant when working in close

quarters or congested areas.

Before beginning work, familiarize yourself with the

surroundings and circumstances of the site, such as obstacles

in the working and travelling area, the soil bearing capacity and

any barriers separating the construction site from public roads.

When travelling on public roads, ways and places always

observe the valid traffic regulations and, if necessary, make

sure beforehand that the machine is in a condition compatible

with these regulations

Always keep at a distance from the edges of building pits and

slopes.

DO NOT run the engine in a closed building for an extended

length of time. EXHAUST FUMES CAN KILL.

DO NOT operate the compactor on non-compactable material,

such as concrete or hardened asphalt.

RX-264H/RX-344H Upright Rammer

v-EN Operation & Maintenance Manual

EN

Maintenance

Observe the adjusting, maintenance and inspection activities

and intervals set out in the operating instructions, including

information on the replacement of parts and equipment. These

activities may be executed by skilled personnel only.

Ensure that the maintenance area is adequately secured.

After cleaning, examine all fuel, lubricant, and hydraulic fluid

lines for leaks, loose connections, chafe marks and damage.

Any defects found must be rectified without delay.

Always tighten any screwed connections that have been

loosened during maintenance and repair.

Any safety devices removed for set-up, maintenance or repair

purposes must be refitted and checked immediately upon

completion of the maintenance and repair work.

Ensure that all consumables and replaced parts are disposed of

safely and with minimum environmental impact.

AVOID, whenever possible, servicing, cleaning or examining the

unit with the engine running.

NEVER fill the fuel tank, with the engine running, while near an

open flame, or when smoking. ALWAYS wipe up any spilled fuel

immediately.

ALWAYS disconnect the spark plug before performing any work

on the unit.

DO NOT alter the engine governor settings from that indicated

in the engine manual.

ALWAYS replace damaged or lost decals. Refer to the Parts

Manual for the proper location and part number of all decals.

Carry out welding, flame-cutting and grinding work on the

machine only if this has been expressly authorized, as there

may be a risk of explosion and fire.

Before carrying out welding, flame-cutting and grinding

operations, clean the machine and its surroundings from dust

and other inflammable substances and make sure that the

premises are adequately ventilated (risk of explosion).

RX-264H/RX-344H Upright Rammer

vi-EN Operation & Maintenance Manual

INTERNATIONAL MACHINE SYMBOLS

SYMBOLS

The following explains the meaning of international symbols that may appear on your machine.

ENGINE OIL PRESSURE

WATER TEMPERATURE

ON/OFF

LIGHTS

WATER

BATTERY

AMMETER OR VOLTMETER

AIR PRESSURE

LOW AIR PRESSURE

ENGINE RPM

BRAKE ON

BRAKE OFF

HORN

CAUTION

DIESEL FUEL

ON

OFF

SLOW

FAST

TRANSMISSION

GREASE

OIL LUBRICATION POINT

HYDRAULIC OIL

HOURS

NEUTRAL

LOW ENINGE RPM

PARKING BRAKE

DRUM VIBRATION

HIGH AMPLITUDE

LOW AMPLITUDE

FREQUENCY

CAUTION – PRESSURE

RX-264H/RX-344H Upright Rammer

1-EN Operation & Maintenance Manual

EN

APPLICATION

Your upright rammer RX delivers a high impact force with a high

amplitude on a relatively small foot surface. It makes it an

excellent choice for compacting cohesive and semi-cohesive

soils, which require high energy to rearrange the particles.

Thanks to their design and maneuverability, the RX-264H and

RX-344H are ideal for compacting backfilling in narrow

trenches.

Easy maintenance: The rugged 4 stroke Honda engines will

deliver hours of trouble-free operation.

The choice between RX-264H and RX-344H depends upon the

level of productivity that you require: with a wider foot, the

RX-344H will achieve more sqm per hour. On the other hand,

the RX-264H is lighter and therefore easier to handle around

the jobsite obstacles.

RX-264H/RX-344H Upright Rammer

2-EN Operation & Maintenance Manual

RX-264H/RX-344H Upright Rammer

3-EN Operation & Maintenance Manual

EN

SPECIFICATIONS

Performance

RX-264H RX-344H

OPERATING WEIGHT 58 kg 72 kg

TRAVEL SPEED 12-14 mpm 12-14 mpm

IMPACT FORCE 10 kN 12.7 kN

BLOWS PER MINUTE 600-650 vpm 600-650 vpm

RECOMMENDED DEPTH 460 mm 610 mm

AREA CAPACITY PER HOUR 195 sq. m 235 sq. m

NOISE LEVEL 104 Lwa 104 Lwa

VIBRATION LEVEL --- 8.0 m/s²

Engine

RX-264H RX-344H

ENGINE (MAKE & MODEL) Honda GX100 Aircooled gasoline Honda GX120 Aircooled gasoline

ENGINE HORSEPOWER 2.2 kw/4000 rpm 2.9 kw/3700 rpm

FUEL Automobile gasoline Automobile gasoline

STARTING SYSTEM Recoil starter Recoil starter

DRIVE Direct drive Direct drive

Dimensions

RX-264H RX-344H

OVERALL LENGTH 675 mm 675 mm

OVERALL WIDTH 385 mm 466 mm

OVERALL HEIGHT 1100 mm 1115 mm

SHOE SIZE 230 x 330 mm 270 x 330 mm

Capacity

RX-264H RX-344H

FUEL TANK CAPACITY 2.5 liters 2.5 liters

Fluid capacities

RX-264H RX-344H

ENGINE OIL (SAE 10W30) 0.4 liters 0.6 liters

MAIN BODY OIL (SAE 10W30) 0.6 liters 0.9 liters

RX-264H/RX-344H Upright Rammer

4-EN Operation & Maintenance Manual

RX-264H/RX-344H Upright Rammer

5-EN Operation & Maintenance Manual

EN

OPERATING INSTRUCTIONS

SAFETY CHECKS – PRE-STARTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

INSPECTION PRIOR TO OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OPERATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

LONG TERM STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

RX-264H/RX-344H Upright Rammer

6-EN Operation & Maintenance Manual

SAFETY CHECKS – PRE-STARTING

Before starting each day, in addition to the 10 hour daily routine

maintenance, check or inspect the following items to ensure

trouble free performance.

1. Check fluid lines, hoses, fittings, filler openings, drain plugs,

pressure cap, muffler, safety shrouds and the area

underneath the unit for signs of leakage or damage. Fix any

leaks and correct any damage before operating.

2. Inspect the entire unit for damaged or missing parts and

repair or replace them as needed.

3. Check the fuel level. If necessary, fill the fuel tank with the

proper fuel.

4. Check all fastening hardware to ensure it is adequately

tightened and that none is missing or broken.

5. Do not operate faulty equipment.

6. Be observant of people and obstructions within the work

area.

7. Check engine for fuel.

Please read “INSTRUCTIONS FOR USE” for HONDA engine

GX100 (RX-264H) and for HONDA engine GX120 (RX-344H)

and this instruction manual for correct use and care.

Please check if the unit is correctly maintained in good

operating conditions.

INSPECTION PRIOR TO OPERATION

Check Engine Oil

Before checking or refilling engine oil, be sure the upright

rammer is located on a stable level surface.

Do not thread the gauge into oil filler to check oil level. If the oil

level is below the lower level line on the dipstick, refill with the

proper oil to the upper level (to the neck of oil filler). See

SECTION – MAINTENANCE, “50 HOUR OR WEEKLY

ROUTINE MAINTENANCE”.

Check Engine for Fuel

CAUTION

Do not refuel while smoking near an open flame or other

potential hazards.

Cleaning Air Cleaner

Check Air Cleaner to be sure it is clean and not comtaminated.

If it needs cleaned perform the following steps:

• Take out the outer urethane foam and inner element.

• Wash the element in kerosene or diesel fuel.

• Saturate it in a mixture of 3 parts kerosene or diesel fuel and

1 part engine oil.

• Shake off excessive oil and reinstall.

• Wash the air cleaner case using kerosene.

• After cleaning it up, apply engine oil on the inner part of the

case.

CAUTION

If the air cleaner element is seriously contaminated engine

start up may fail or poor output and malfunctions of the

engine may result.

Check each part for lose or broken Bolts and Nuts

Tighten loose Bolts and Nuts, if any. Check each part for fuel or

oil leak. Replace broken or damaged parts, if any, with new

ones.

Lubrication of Main Body

Check the Main Body oil level with the oil gauge before each

operation. Change oil after the first 50 hours and every

200 hours. See SECTION – MAINTENANCE, “200 HOUR OR

QUARTERLY ROUTINE MAINTENANCE”.

OPERATION

Starting

1. Turn the STOP SWITCH clockwise to the ON position.

RX-264H: [Figure 1]

RX-344H: [Figure 2]

Figure 1 RX-264H Stop Switch

c

ON

OFF

RX-264H/RX-344H Upright Rammer

7-EN Operation & Maintenance Manual

EN

Figure 2 RX-344H Stop Switch

2. Open the FUEL COCK (

c, [Figure 3]) located under the

fuel tank.

RX-344H only: Move the FUEL VALVE LEVER to the “ON”

position [Figure 4].

Figure 3 Fuel Cock

Figure 4 RX-344H Fuel Valve Lever

3. Close the CHOKE LEVER.

RX-264H: [Figure 5]

RX-344H: [Figure 6]

If the engine is cold or the ambient temperature is low, close

the Choke Lever fully. If the engine is warm or the ambient

temperature is high, open the Choke Lever half-way, or keep

it fully open.

Figure 5 RX-264H Choke Lever

Figure 6 RX-344H Choke Lever

4. Position the THROTTLE LEVER [Figure 8] to “LOW” speed

position.

5. Pull the STARTER HANDLE (

c, [Figure 7]) of RECOIL

STARTER slowly until resistance is felt. This is the

“COMPRESSION” point. Return the Handle to its original

position and pull swiftly. After starting the engine, allow the

Starter Handle to return to its original position while still

holding the Handle.

Figure 7

After the engine starts, set the Throttle Lever [Figure 8] at the

low speed position “LOW” and warm it up without load for a few

minutes. Fully open CHOKE LEVER (

c, [Figure 5] [Figure 6])

gradually.

c

STOP SWITCH

ON

CLOSE

OPEN

c

FUEL VALVE

LEVER

ON

CHOKE LEVER

CLOSE

OPEN

CHOKE LEVER

CLOSE

OPEN

c

RX-264H/RX-344H Upright Rammer

8-EN Operation & Maintenance Manual

CAUTION

Avoid fully pulling out the rope. Return the Handle to its

original position.

Running

1. While standing behind the machine, hold it firmly and

shift the THROTTLE LEVER [Figure 8] to “HIGH” speed

position quickly. The upright rammer starts to jump and

move forward.

Figure 8

2. Hold the rammer guide bar firmly with two hands. Walk

behind the machine at its own speed and keep controlling

the travelling.

3. Changing direction is done by pivoting the machine around

its vertical axis left or right while it jumps.

4. When coming to a dead-end, shift the throttle to low speed

in order to immobilize the rammer. Turn it around and switch

to high speed in order to make it jump again.

5. Circulate the unit all around the area to be compacted.

Depending on the conditions, three to five passes might be

necessary to obtain proper compaction.

CAUTION

Wearing safety shoes and gloves is compulsory.

Respect the maximum depth of fresh soil to be compacted

(SPECIFICATIONS). Otherwise there will remain an

intermediate layer of loose soil.

Do not over-compact the soil: it will only bring

unnecessary wear to the machine.

Stopping

1. Shift the throttle lever (

c, [Figure 9]) to “LOW” speed

position.

2. Allow the engine to run at low speed for 2-3 minutes before

stopping.

3. Turn the STOP SWITCH (

d, [Figure 9] (RX-264H &

RX-344H)) counterclockwise to the “OFF” position.

4. Close the fuel cock (

e, [Figure 9]).

5. RX-344H only

Close the FUEL COCK (

f, [Figure 9]) located under the

fuel tank.

Figure 9

LOW SPEED

HIGH SPEED

THROTTLE LEVER

LOW SPEED

HIGH SPEED

THROTTLE LEVER

c

RX-264H Stop Switch

ON

OFF

d

STOP SWITCH

OFF

d

RX-344H Stop Switch

RX-264H/RX-344H Upright Rammer

9-EN Operation & Maintenance Manual

EN

CAUTION

Do not stop engine suddenly while running at high speed.

TRANSPORTATION

1. A carrying wheel cart is supplied with the rammer for

transportation in a vertical position around the job site.

2. In case the rammer must be laid down horizontally for

transportation, for storage or for service reason, it must rest

on the plastic wheels fixed to the top frame. On the

RX-264H, these wheels are located on the front side; on the

RX-344H, the wheels are located on the right-hand side.

In this position, the rammer can be moved on small

distances (in/out of a truck for instance) using the handle on

the shoe.

3. The highest point of the top frame can be used as a lifting

eye for loading/unloading or displacement on the job-site.

LONG TERM STORAGE

WARNING

Discharge fuel (No Smoking !)

1. Remove the strainer cup of the fuel cock, place the strainer

over a container and open the fuel cock to discharge fuel

from the fuel tank. Remove the carburetor float chamber bolt

from the bottom and discharge fuel from the carburetor.

2. Close the fuel cock.

3. Change the engine oil with fresh oil.

4. Remove the spark plug, pour about 5 ml of the engine oil

into the cylinder, slowly pull the starter handle of the recoil

starter 2 or 3 times, and re-install the spark plug.

5. Slowly pull the recoil starter handle until resistance is felt

and leave it in that position.

6. Clean the unit and engine.

7. Store the unit and engine indoors in a well-ventilated, low

humidity area. Use the cover to avoid dirt, etc. if storage will

be for a long time.

CAUTION

Always stop the engine and allow to cool down before

covering the unit.

CLOSE

OPEN

e

FUEL VALVE

LEVER

OFF

f

RX-344H only

RX-264H/RX-344H Upright Rammer

10-EN Operation & Maintenance Manual

RX-264H/RX-344H Upright Rammer

11-EN Operation & Maintenance Manual

EN

MAINTENANCE

GENERAL MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

INITIAL BREAK-IN MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

10 HOUR OR DAILY ROUTINE MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

50 HOUR OR WEEKLY ROUTINE MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

200 HOUR OR QUARTERLY ROUTINE MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

TROUBLESHOOTING THE ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

TROUBLESHOOTING THE MACHINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

RX-264H/RX-344H Upright Rammer

12-EN Operation & Maintenance Manual

GENERAL MAINTENANCE

1. Engine RPM is adjusted to:

RX-264H: 4,000 – 4,100 min

-1

or rpm.

RX-344H: 3,600 – 3,700 min

-1

or rpm.

(With load)

2. Check Bolts and Nuts for looseness. Tighten it if necessary.

3. Check for fuel and oil leak.

4. Keep the RUBBER BUFFER operating handle away from oil

and fuel.

5. Please refer to “INSTRUCTION FOR USE” for HONDA

engine GX100 (RX-264H) or for HONDA engine GX120

(RX-344H) regarding the how-to maintenance for engine.

Air Cleaner

Keep the Air Cleaner Element clean. Take out the outer

urethane foam and inner element. Wash the element in

kerosene or diesel fuel. Saturate it in a mixture of 3 parts

kerosene or diesel fuel and 1 part engine oil. Shake off

excessive oil and reinstall. Wash the air cleaner case using

kerosene. After cleaning it up, apply the engine oil on the inner

part of the case.

CAUTION

If the air cleaner element is seriously contaminated,

start-up failure, poor output and malfunctions of the engine

may result.

Lubrication

Lubrication is an essential part of preventive maintenance,

affecting to a great extent the useful life of the unit. Different

lubricants are needed and some components in the unit require

more frequent lubrication than others.

Specific recommendations of brand and grade of lubricants are

not made here due to regional availability, operating conditions,

and the continual development of improved products. Where

questions arise, refer to the requirements and specifications in

the manufacturer's manual.

All oil levels are to be checked with the machine parked on a

level surface, and while the oil is cold, unless otherwise

specified.

Check Fuel

1. Stop the engine and open the fuel tank cap.

2. Use automobile unleaded gasoline only.

3. Close the fuel cock before filling the fuel tank.

4. When filling the fuel tank, always use the fuel filter.

5. Wipe off any spilled fuel before starting the engine.

WARNING

Fuel is flammable. It may cause injury and property

damage.

Shut down the engine, extinguish all open flames and do

not smoke while filling the fuel tank.

Always wipe up any spilled fuel.

INITIAL BREAK-IN MAINTENANCE

Engine Oil

Drain the engine oil after the first 20 hours of operation. Fill with

the correct amount of the recommended oil. Check the oil level

with the oil filler cap/dip stick. See “50 HOUR OR WEEKLY

ROUTINE MAINTENANCE”.

WARNING

Hot oil and/or components can burn.

Oil must be at normal operating temperature when

draining.

Avoid contact with hot oil or components.

Lubrication of Main Body

Check the Main Body oil level with the oil gauge before each

operation. Change oil after the first 50 hours and every

200 hours. See “200 HOUR OR QUARTERLY ROUTINE

MAINTENANCE”.

Check each part of lose or broken bolts and nuts

Tighten loose Bolts and Nuts, if any. Check each part for fuel oil

leak. Replace broken or damaged parts, if any, with new ones.

Sivu latautuu ...

Ingersoll-Rand RX-264H Operation & Maintenance Manual

Tämä käsikirja sopii myös

Ingersoll-Rand RX-264H Operation & Maintenance Manual

muilla kielillä

Liittyvät paperit

Muut asiakirjat