Yamaha RX-A2060 Ohjekirja

AV Receiver

Owner’s Manual

EN

Read the supplied booklet “Safety Brochure” before using the unit.

En 2

CONTENTS

Introduction.................................................................................. 5

Accessories................................................................................... 5

About this book ............................................................................ 5

About remote control .................................................................... 6

Batteries ......................................................................................................................................................... 6

Operating range of the remote control......................................................................................................... 6

FEATURES ..................................................................................... 7

What you can do with the unit ........................................................ 7

Useful applications ...................................................................................................................................... 12

Part names and functions .............................................................13

Front panel ................................................................................................................................................... 13

Front display (indicators) ............................................................................................................................ 15

Rear panel..................................................................................................................................................... 16

Remote control ............................................................................................................................................ 18

PREPARATIONS ............................................................................19

General setup procedure ..............................................................19

1 Connecting speakers ..................................................................20

Basic speaker configuration ........................................................................................................................ 21

Advanced speaker configuration ................................................................................................................ 30

2 Connecting a TV and playback devices .........................................41

Input/output jacks and cables .................................................................................................................... 41

Connecting a TV ........................................................................................................................................... 42

Connecting video devices (such as BD/DVD players) ................................................................................. 44

Connecting audio devices (such as CD players) ......................................................................................... 46

Connecting to the jacks on the front panel ................................................................................................ 47

3 Connecting the FM/AM antennas..................................................48

4 Connecting a network cable or preparing the wireless antenna......49

Connecting the network cable .................................................................................................................... 49

Preparing the wireless antenna .................................................................................................................. 49

5 Connecting other devices............................................................50

Connecting a device compatible with the trigger function ........................................................................50

6 Connecting the power cable........................................................50

7 Selecting an on-screen menu language ........................................51

8 Configuring the necessary speaker settings..................................52

9 Optimizing the speaker settings automatically (YPAO) ..................53

Multi Position ................................................................................................................................................55

Angle/Height .................................................................................................................................................56

Measuring at one listening position (single measure) ................................................................................56

Measuring at multiple listening positions (multi measure)........................................................................59

Checking the measurement results .............................................................................................................62

Reloading the previous YPAO adjustments .................................................................................................62

Error messages .............................................................................................................................................63

Warning messages........................................................................................................................................64

10 Connecting to a network device wirelessly .................................65

Selecting the connection method ...............................................................................................................65

Connecting the unit to a wireless network..................................................................................................66

Connecting a mobile device to the unit directly (Wireless Direct) .............................................................71

11 Connecting to the MusicCast network ........................................73

MusicCast CONTROLLER ..............................................................................................................................73

Adding the unit to the MusicCast network ..................................................................................................73

PLAYBACK ....................................................................................74

Basic playback procedure.............................................................74

Selecting an HDMI output jack.....................................................................................................................74

Selecting the input source and favorite settings with one touch

(SCENE) ......................................................................................75

Registering a scene.......................................................................................................................................76

Selecting setting items to be included as scene assignments ...................................................................76

Selecting the sound mode.............................................................77

Enjoying stereoscopic sound fields (CINEMA DSP HD

3

/CINEMA DSP 3D) ..................................................78

Enjoying unprocessed playback ..................................................................................................................81

Enjoying pure high fidelity sound (Pure Direct) ..........................................................................................82

En 3

Playing back digitally compressed formats (such as MP3, etc.) with enriched sound

(Compressed Music Enhancer) .................................................................................................................... 82

Listening to FM/AM radio ..............................................................83

Setting the frequency steps......................................................................................................................... 83

Selecting a frequency for reception............................................................................................................ 84

Registering favorite radio stations (presets) .............................................................................................. 84

Radio Data System tuning ........................................................................................................................... 85

Operating the radio on the TV ..................................................................................................................... 87

Playing back music via Bluetooth ..................................................88

Playing back Bluetooth device music on the unit ...................................................................................... 88

Enjoying audio using Bluetooth speakers/headphones ............................................................................ 89

Playing back music stored on a USB storage device.........................90

Connecting a USB storage device ............................................................................................................... 90

Playback of USB storage device contents .................................................................................................. 91

Playing back music stored on media servers (PCs/NAS) ...................94

Media sharing setup..................................................................................................................................... 94

Playback of PC music contents ................................................................................................................... 95

Listening to Internet radio ............................................................98

Playback of Internet radio ........................................................................................................................... 98

Registering favorite Internet radio stations (bookmarks) ....................................................................... 100

Playing back iTunes/iPod music with AirPlay................................ 101

Playback of iTunes/iPod music contents.................................................................................................. 101

Playing back videos/audio in multiple rooms (multi-zone) ............ 103

Multi-zone configuration examples .......................................................................................................... 103

Preparing the multi zone system .............................................................................................................. 104

Controlling Zone2, Zone3 or Zone4 .......................................................................................................... 108

Registering favorite items (shortcut) ........................................... 110

Registering an item .................................................................................................................................... 110

Recalling a registered item........................................................................................................................ 110

Controlling the unit from a web browser (web control) ................. 111

Top menu screen........................................................................................................................................ 112

Control screen ............................................................................................................................................ 112

Settings screen........................................................................................................................................... 113

Viewing the current status .......................................................... 114

Switching information on the front display.............................................................................................. 114

Viewing the status information on the TV................................................................................................. 114

Configuring playback settings for different playback sources

(Option menu)........................................................................... 115

Option menu items.....................................................................................................................................115

CONFIGURATIONS....................................................................... 120

Configuring input sources (Input menu)....................................... 120

Input menu items .......................................................................................................................................121

Configuring the SCENE function (Scene menu) ............................. 122

Scene menu items ......................................................................................................................................123

Configuring sound programs/surround decoders

(DSP Program menu) ................................................................. 124

DSP Program menu items ..........................................................................................................................125

Configuring various functions (Setup menu) ................................ 127

Setup menu items.......................................................................................................................................128

Speaker (Manual Setup) .............................................................................................................................131

Sound ..........................................................................................................................................................136

Video............................................................................................................................................................139

HDMI ............................................................................................................................................................140

Network.......................................................................................................................................................142

Bluetooth ....................................................................................................................................................144

Multi Zone ...................................................................................................................................................145

Function ......................................................................................................................................................147

ECO ..............................................................................................................................................................150

Language.....................................................................................................................................................150

Viewing information about the unit (Information menu) ............... 151

Types of information ..................................................................................................................................151

Configuring the system settings (ADVANCED SETUP menu)............ 153

ADVANCED SETUP menu items ..................................................................................................................153

Changing the speaker impedance setting (SPEAKER IMP.) ......................................................................154

Turning on/off the remote control sensor (REMOTE SENSOR) ................................................................154

Selecting the remote control ID (REMOTE CON AMP)...............................................................................154

Changing the FM/AM tuning frequency setting (TUNER FRQ STEP).........................................................154

Switching the video signal type (TV FORMAT)...........................................................................................155

Removing the limitation on HDMI video output (MONITOR CHECK) .......................................................155

Selecting the HDMI 4K signal format (4K MODE).......................................................................................155

DTS Format Notification Setting (DTS MODE)...........................................................................................155

Backing up/recovering the settings (RECOV./BACKUP)............................................................................156

En 4

Restoring the default settings (INITIALIZE)............................................................................................... 156

Updating the firmware (FIRM UPDATE)..................................................................................................... 156

Checking the firmware version (VERSION) ............................................................................................... 156

Controlling external devices with the remote control ................... 157

Registering the remote control code for a TV........................................................................................... 157

Registering the remote control codes for playback devices.................................................................... 158

Resetting remote control codes ................................................................................................................ 159

Updating the unit’s firmware via the network .............................. 160

APPENDIX .................................................................................. 161

Frequently asked questions ........................................................ 161

Troubleshooting ........................................................................ 162

First, check the following:.......................................................................................................................... 162

Power, system and remote control........................................................................................................... 162

Audio........................................................................................................................................................... 164

Video ........................................................................................................................................................... 166

FM/AM radio................................................................................................................................................ 167

Bluetooth.................................................................................................................................................... 168

USB and network ....................................................................................................................................... 169

Error indications on the front display .......................................... 171

Glossary .................................................................................... 172

Audio information (audio decoding format) ............................................................................................ 172

Audio information (others) ........................................................................................................................ 174

HDMI and video information ..................................................................................................................... 174

Network information ................................................................................................................................. 175

Yamaha technologies................................................................................................................................. 175

Supported devices and file formats ............................................. 176

Supported devices ..................................................................................................................................... 176

File formats................................................................................................................................................. 176

Video signal flow........................................................................ 177

Video conversion table .............................................................................................................................. 177

Multi-zone output ...................................................................... 178

Audio output .............................................................................................................................................. 178

Video output............................................................................................................................................... 178

Information on HDMI..................................................................179

HDMI Control .............................................................................................................................................. 179

Audio Return Channel (ARC) ......................................................................................................................180

HDMI signal compatibility ..........................................................................................................................181

Reference diagram (rear panel)................................................... 182

Trademarks............................................................................... 183

Specifications............................................................................ 184

List of remote control codes........................................................ 188

En 5

Introduction

Accessories

Check that the following accessories are supplied with the product.

☐

AM antenna

☐

FM antenna

☐

YPAO microphone

☐

Microphone base

Pole

☐

Power cable

☐

Remote control

☐

Batteries (AAA, R03, UM-4) (x2)

☐

CD-ROM (Owner’s Manual)

☐

Easy Setup Guide

☐

Safety Brochure

* One of the above FM antennas is supplied depending on the region of purchase.

* The microphone base and pole are used for angle/height measurement during YPAO.

* The supplied power cable varies depending on the region of purchase.

About this book

The illustrations of the main unit used in this manual are of the RX-A3060 (U.S.A. model), unless

otherwise specified.

In this manual, illustrations of English menu screens are used as examples.

Some features are not available in certain regions.

Due to product improvements, specifications and appearance are subject to change without

notice.

This manual explains operations using the supplied remote control.

This manual describes all the “iPod touch”, “iPhone” and “iPad” as the “iPod”. “iPod” refers to

“iPod touch”, “iPhone” and “iPad”, unless otherwise specified.

Icons used in this manual

Y

indicates precautions for use of the unit and its feature limitations.

X

indicates supplementary explanations for better use.

En 6

About remote control

This section explains how to use the supplied remote control.

Batteries

Insert the batteries the right way round.

Operating range of the remote control

Point the remote control at the remote control sensor on the unit and remain within the

operating range shown below.

30° 30°

Within

6 m (20 ft)

En 7

FEATURES

What you can do with the unit

The unit is equipped with the various useful features.

Connecting various devices (p.41)

A number of HDMI jacks and various input/output jacks on the unit allow you to connect video

devices (such as BD/DVD players), audio devices (such as CD players), game consoles,

camcorders, and other devices.

Playing back TV audio in surround sound with a single

HDMI cable connection (Audio Return Channel: ARC)

(p.41)

When using an ARC-compatible TV, you only need one HDMI cable to enable video output to

the TV, audio input from the TV, and the transmission of HDMI Control signals.

Various wireless connection methods (p.65)

The unit supports the Wi-Fi feature that allows the unit to connect to your wireless router

(access point) without a network cable connection. In addition, Wireless Direct enables

connecting a mobile device to the unit directly without router.

Home Audio Network with MusicCast (p.73)

The unit supports the MusicCast feature that allows you to link a MusicCast compatible device

to another device in a different room and play them back simultaneously, or control all

MusicCast compatible devices with the dedicated application “MusicCast CONTROLLER”.

HDMI Control

TV audio

Video from external

device

Wi-Fi or

Wireless Direct

En 8

CINEMA DSP

The excitement of a concert hall and the powerful sense of being inside a movie - we all want to enjoy these experiences in our own living room. Yamaha has pursued the fulfillment of these desires

for more than 30 years, and this fulfillment has now taken shape as the Yamaha AV receivers.

What is a sound field?

We perceive sound from a voice or an instrument not only as the sounds that are heard directly

but also as the “reflected” or “reverberant” sound that has been reflected by the walls or

ceiling of the building. The character of the reflected and reverberant sound is affected by the

shape, size, and material of the building, and all of these sounds taken together are what give

us the auditory sensation of being in that specific place.

This unique acoustical character of a specific space is what we call the “sound field”.

Conceptual diagram of a concert hall’s sound field

Conceptual diagram of a sound field created by the unit

CINEMA DSP/CINEMA DSP 3D

Yamaha has accumulated a massive amount of acoustical data by analyzing the actual sound

fields of concert halls and performance spaces around the world. “CINEMA DSP” allows this

data to be applied to create sound fields. This unit contains a wide variety of sound programs

using CINEMA DSP.

By selecting a sound program that is appropriate to the content of the playback source such as

movies, music, or games, you can maximize the acoustical effectiveness of that specific

content. (For example, a sound program designed for movies can give you the sensation of

actually being in that scene.)

In addition, the “CINEMA DSP 3D” function uses 3-dimensional sound field data that includes

the axis of height, generating an even more realistic sound field with a spatial sense.

CINEMA DSP HD

3

(RX-A3060 only)

“CINEMA DSP HD

3

” is Yamaha’s flagship 3D sound field playback technology that takes full

advantage of the massive amount of acoustic reflection data included in the sound field data.

With support for rear presence speaker output, it delivers more than twice as much capability

for generating acoustic reflections as conventional CINEMA DSP 3D, in addition to

high-frequency playback capability, delivering an utterly natural and powerful spatial sound

field.

Capability for reproducing reflections

(when the sound program “Hall in Munich” is selected)

CINEMA DSP HD

3

Level

CINEMA DSP 3D

Time

En 9

YPAO

YPAO is Yamaha original automatic calibration system to optimizing your sound and surround

environment by using microphone measurement. It can be create ideal listening environment

for maximizing high sound quality contents playback by adjusting various speakers setting

and the sound field automatically.

YPAO-R.S.C.

In typical home, the sound has problems such as a blurred low-frequency range or a smearing

of the acoustical sound image caused by undesirable sound reflection from the walls or ceiling.

“YPAO-R.S.C.” is technology that reduces only the unwanted reflections and produces the

acoustic perfection for your listening environment.

YPAO Volume

YPAO Volume automatically adjusts the high and low frequency levels at any volume level so

that you hear natural sounds even at low volume.

YPAO 3D measurement

The direction (angle) of front, surround and presence speakers, and the height of presence

speakers as seen from the listening position is measured, and compensation is applied to

maximize the 3D sound field effectiveness of the CINEMA DSP.

Compensation

Time

Level

YPAO Volume OFF

YPAO Volume ON

FrequencyLow High

Level

High

En 10

Unrivaled audio and video quality

You can enjoy unrivaled high-quality audio and videos with the unit.

High-resolution music enhancer

Hi-bit high-sampling extension up to 96 kHz / 24-bit can be applied to lossless 44.1/48 kHz

content such as from a CD (2-channel PCM) or a FLAC file for further heightening of the

musicality in the original content (p.118).

Before processing

After processing

High-quality video processing

From low-quality digital video to BD (Blu-ray disc) images, any content can be played back as

a high-quality image (p.139).

• Motion adaptive and edge adaptive deinterlacing

• Multi-cadence (including 3-2 pull-down) detection

• Up to 6 presets that can be applied separately to each input source

You can also apply fine touches such as detail enhancement and edge enhancement.

Frequency

Loudness

Playback bandwidth of a 44.1/48 kHz

signal (such as a CD)

Frequency

Loudness

Playback bandwidth of a

88.2/96 kHz signal

En 11

Expandable to meet diverse needs

The unit provides excellent expandability which is applicable to all uses.

Support for bi-amp connections and external power amp

expansion

To obtain even high audio quality, you can connect front speakers that support power amp

expansion, or expand your system by adding an external power amp (such as a Hi-Fi amp).

For details, refer to “Advanced speaker configuration” (p.30).

The best expandability in Yamaha (RX-A3060 only)

By connecting an external power amp, you can enjoy the highest peak of CINEMA DSP - an

11.2-channel 3-dimensional sound field.

(Example)

Multi-zone function

The multi-zone function (p.103) allows you to play back different input sources in the room

where the unit is installed (main zone) and in other rooms (such as Zone2).

(The following shows examples of use.)

Enjoying music using speakers in another room

While enjoying multichannel playback in your living room, you can listen to music through the

speakers of a different room.

Enjoying videos using a TV in another room (HDMI connection)

While enjoying multichannel playback in your living room, you can enjoy videos and music

being input via HDMI on a TV in a different room.

External power amp

Living room (main zone)

Study room (such

as Zone2)

Living room (main zone)

Kitchen

(such as Zone4)

En 12

Useful applications

The following applications provide you the flexibility to control the unit or assist you with the cable connections.

⬛ AV CONTROLLER

“AV CONTROLLER” will turn your smartphone/tablet into a Wi-Fi enabled remote control for

your Yamaha network products. This application provides you the flexibility to control the

available inputs, volume, mute, power commands and playback source.

Functions

• Power on/off and volume adjustment

• Input, scene and sound mode selection

• DSP Parameter adjustment

• Playback control (including music selection for some sources)

X

For details, search for “AV CONTROLLER” on the App Store or Google Play.

⬛ AV SETUP GUIDE (for tablet)

“AV SETUP GUIDE” is an application that assists you with cable connections between AV

receiver and source devices as well as AV receiver setup. This application guides you through

the various settings such as speaker connections, TV and video/audio device connections and

selecting the speaker system.

Functions

• Connection guide (speakers, TV and video/audio devices)

• Setup guide (YPAO settings and various setup assistance with illustrations)

• Viewing owner’s manual

X

For details, search for “AV SETUP GUIDE” on the App Store or Google Play.

En 13

Part names and functions

This section explains the functions of the parts of the unit.

Front panel

a MAIN ZONE z key

Turns on/off (standby) the unit.

b Standby indicator

Lights up when the unit is in standby mode under any of the

following conditions.

• HDMI Control is enabled (p.140)

• Standby Through is enabled (p.141)

• Network Standby is enabled (p.143)

• Bluetooth Standby is enabled (p.144)

c Front display

Displays information (p.15).

d Remote control sensor

Receives remote control signals (p.6).

e PURE DIRECT key

Enables/disables Pure Direct (p.82).

f INPUT knob

Selects an input source.

g Front panel door

For protecting controls and jacks (p.14).

h VOLUME knob

Adjusts the volume.

Opening the front panel door

To use controls or jacks behind the front panel door, gently

press the bottom of the door to open it. Keep the door closed

when not using controls or jacks behind the front panel door.

(Be careful not to trap your fingers.)

ENTER

OPTION

ON SCREEN

DISPLAYRETURN

YPAO MIC

PHONES

USB

SILENT CINEMA

TONE/BALANCE

STRAIGHT

PROGRAM

MULTI ZONE

VIDEO AUX

ZONE 2

ZONE 3

ZONE 4

ZONE CONTROL

VIDEO

5V

1A

SCENE

1234

RL AUDIO

HDMI IN

INFO

(

WPS

)

MEMORY

FM AM

TUNING

PRESET

INPUT

MAIN ZONE

VOLUME

PURE DIRECT

(

CONNECT

)

d ebca

f

h

g

En 14

⬛ Inside of the front panel door

a ON SCREEN key

Displays the on-screen menu on the TV.

b Menu operations keys

: Select a menu or a parameter.

ENTER: Confirms a selected item.

RETURN: Returns to the previous screen.

c OPTION key

Displays the option menu (p.115).

d DISPLAY key

Displays status information on the TV (p.114).

e TONE/BALANCE key

Adjusts the high-frequency range and low-frequency range of

output sounds (p.116).

Adjusts the left/right channel volume balance for Zone2 or Zone3

(p.109).

f STRAIGHT (CONNECT) key

Enables/disables the straight decode mode (p.81).

Enters MusicCast CONTROLLER registration by holding down for 5

seconds (p.73).

g PROGRAM keys

Select a sound program or a surround decoder (p.77).

h SCENE keys

Select the registered input source, sound program, and various

settings with one touch. Also, turns on the unit when it is in

standby mode (p.75).

i MULTI ZONE keys

ZONE 2-4: Enables/disables the audio output to each zone

(p.108).

ZONE CONTROL: Changes the zone that is controlled by the keys

and knobs on the front panel (p.108).

j INFO (WPS) key

Selects the information displayed on the front display (p.114).

Enters the wireless network connection setup (WPS push button

configuration) by holding down for 3 seconds (p.67).

k MEMORY key

Registers FM/AM radio stations as preset stations (p.84).

Registers USB/network contents as shortcuts (p.110).

l FM and AM keys

Switch between FM and AM (p.84).

m PRESET keys

Select a preset FM/AM radio station (p.85).

Selects a USB/network content from shortcuts (p.110).

n TUNING keys

Select the radio frequency (p.84).

o USB jack

For connecting a USB storage device (p.90).

p YPAO MIC jack

For connecting the supplied YPAO microphone (p.53).

q PHONES jack

For connecting headphones.

r VIDEO AUX jacks

For connecting a device, such as a camcorder and a game console

(p.47).

ENTER

OPTION

ON SCREEN

DISPLAYRETURN

YPAO MIC

PHONES

USB

SILENT CINEMA

TONE/BALANCE

STRAIGHT

PROGRAM

MULTI ZONE

VIDEO AUX

ZONE 2

ZONE 3

ZONE 4

ZONE CONTROL

VIDEO

5V

1A

SCENE

1234

RL AUDIO

HDMI IN

INFO

(

WPS

)

MEMORY

FM AM

TUNING

PRESET

(

CONNECT

)

dg lnacef jkmbhi

op q r

En 15

Front display (indicators)

(RX-A3060 U.S.A. model)

a HDMI

Lights up when HDMI signals are being input or output.

IN

Lights up when HDMI signals are being input.

OUT1/OUT2

Indicates the HDMI OUT jacks currently outputting an HDMI signal.

b ECO

Lights up when the unit is in the eco mode (p.150).

c Signal strength indicator

Indicates the strength of the wireless network signal (p.65).

d ZONE indicators

Lights up when Zone2, Zone3 or Zone4 is enabled (p.108).

e SLEEP

Lights up when the sleep timer is on.

f Information display

Displays the current status (such as input name and sound mode

name). You can switch the information by pressing INFO (p.114).

g MUTE

Blinks when audio is temporarily muted.

h Volume indicator

Indicates the current volume.

i VIRTUAL

Lights up when the Virtual Presence Speaker (VPS) or Virtual

Surround Back Speaker (VSBS) (p.78) or the virtual surround

processing (p.80) is working.

j Bluetooth indicator

Lights up when the unit is connecting to a Bluetooth device (p.88).

k ENHANCER

Lights up when Compressed Music Enhancer (p.82) is working.

l CINEMA DSP indicator

(RX-A3060)

“CINEMA DSP HD” lights up when CINEMA DSP (p.78) is working.

“CINEMA DSP !” lights up when CINEMA DSP HD

3

is activated.

(RX-A2060)

“CINEMA DSP” lights up when CINEMA DSP (p.78) is working.

“CINEMA DSP n” lights up when CINEMA DSP 3D is activated.

m STEREO

Lights up when the unit is receiving a stereo FM radio signal.

TUNED

Lights up when the unit is receiving an FM/AM radio station signal.

n PARTY

Lights up when the unit is in the party mode (p.109).

o Cursor indicators

Indicate the remote control cursor keys currently operational.

p ADAPTIVE DRC

Lights up when Adaptive DRC (p.116) is working.

q Speaker indicators

Indicate speaker terminals from which signals are output.

A Front speaker (L)

S Front speaker (R)

D Center speaker

F Surround speaker (L)

G Surround speaker (R)

H Surround back speaker (L)

J Surround back speaker (R)

K Surround back speaker

B Front presence speaker (L)

N Front presence speaker (R)

M Rear presence speaker (L)

< Rear presence speaker (R)

C Subwoofer (1)

V Subwoofer (2)

OUT

213

IN

VOLUME

MUTE

ADAPTIVE DRC VIRTUAL

3

ZONE

ECO

234

SBLRPL SBRSB RPR

SW1

SL

SW2

SR

FPL

CL R

FPR

ENHANCER

PART Y

STEREO TUNED

HD

SLEEP

ZONE ZONE

i

h

oqo

a

f

ebc

p

g

d

lj nkm

En 16

Rear panel

(RX-A3060 U.S.A. model)

* The area around the video/audio output jacks is marked in white on the actual product to prevent improper

connections.

HDMI OUT

ARC

(ZONE OUT)

1

2

HDMI

(1 BD/DVD)

AV 1 AV 2 AV 3 AV 4

(HDCP2.2)

AV 5 AV 6 AV 7

IN OUT

REMOTE

R

L

AV 1 AV 2 AV 3 AV 4

AUDIO 1 AUDIO 2 AUDIO 3

(2 TV)

(1 BD/DVD)

OPTICAL

4

OPTICAL

3

COAXIAL COAXIAL

2

COAXIAL

1

PHONO

GND

AC IN

FM

75ȍ

ANTENNA

(

4 RADIO

)

OPTICAL

1

2

ZONE OUT/PRE OUT

ZONE 2/

F. PRESENCE

ZONE 3/

R. PRESENCE

SPEAKERS

CENTER FRONT

SURROUND BACK

SURROUND

R.PRESENCE

R

5

6

L R R RL L L

F. PRESENCE

ZONE 2/ZONE 3/BI-AMP

EXTRA SP1

R

L

SINGLE

AM

PRE OUT

SUBWOOFER

CENTER

FRONT

SURROUND SUR. BACK

(SINGLE)

(FRONT)

(REAR)

EXTRA SP2

RS-232C

TRIGGER

OUT

1

2

12V 0.1A

MAX. TOTAL

NETWORK

( 3

NET

)

Y

P

B PR

PRPB

Y

P

RPB

YPRPB

AV 1

COMPONENT VIDEO

A

AV 3

C

AV 2

B

MONITOR OUT/

ZONE OUT

Y

WIRELESS

(HDCP2.2)

ZONE 2/ZONE 3/F.PRESENCE

a d je ni lkg hfb mc

qo rp

En 17

a PHONO jacks

For connecting to a turntable (p.46).

b AUDIO 1-3 jacks

For connecting to audio playback devices and inputting audio signals (p.46).

c AV 1-4 jacks

For connecting to video/audio playback devices and inputting video/audio signals (p.44).

d HDMI OUT 1 jack

For connecting to an HDMI-compatible TV and outputting video/audio signals (p.41). When using ARC, TV

audio signal can also be input through the HDMI OUT 1 jack.

HDMI OUT 2 (ZONE OUT) jack

For connecting to an HDMI-compatible TV and outputting video/audio signals (p.44), or for connecting to

an HDMI-compatible device used in Zone2 or Zone4 (p.106).

e MONITOR OUT/ZONE OUT

(component/composite video) jacks

For connecting to a TV that supports component or composite video and outputting video signals (p.43)

or for connecting to a zone video monitor used in Zone2 or Zone3 (p.105).

f HDMI (AV 1-7) jacks

For connecting to HDMI-compatible playback devices and inputting video/audio signals (p.44).

g COMPONENT VIDEO (AV 1-3) jacks

For connecting to video playback devices that support component video and inputting video signals

(p.45).

h TRIGGER OUT 1-2 jacks

For connecting to devices that support the trigger function (p.50).

i REMOTE IN/OUT jacks

For connecting to an infrared signal receiver/emitter that allows you to operate the unit and other

devices from another room (p.107).

j NETWORK jack

For connecting to a network with a network cable (p.49).

k Wireless antenna

For connecting to a network device wirelessly (p.65).

l RS-232C terminal

This is a control expansion terminal for custom installation. Consult your dealer for details.

m VOLTAGE SELECTOR

(Brazil and General models only)

Selects the switch position according to your local voltage (p.50).

n AC IN jack

For connecting the supplied power cable (p.50).

o ANTENNA jacks

For connecting to FM and AM antennas (p.48).

p ZONE OUT/PRE OUT jacks (RX-A3060)

For connecting to an external amplifier used in Zone2 or Zone3 and outputting audio (p.105), or for

connecting to an external power amplifier for front presence or rear presence channels (p.40).

ZONE OUT jacks (RX-A2060)

For connecting to an external amplifier used in Zone2 or Zone3 and outputting audio (p.105).

q SPEAKERS terminals

For connecting to speakers (p.20).

r PRE OUT jacks

For connecting to a subwoofer with built-in amplifier (p.28) or to an external power amplifier (p.40).

En 18

Remote control

a Remote control signal transmitter

Transmits infrared signals.

b RECEIVER z key

Turns on/off (standby) the unit.

RECEIVER key

Sets the remote control to operate the unit (p.158). This key lights

up in orange after pressed.

SOURCE key

Sets the remote control to operate external devices (p.158). This

key lights up in green after pressed.

SOURCE z key

Turns on/off an external device.

c Input selection keys

Select an input source for playback.

AV 1-7: AV 1-7 jacks

V-AUX: VIDEO AUX jacks (on the front panel)

AUDIO 1-3: AUDIO 1-3 jacks

PHONO: PHONO jacks

TUNER: FM/AM radio

BLUETOOTH: Bluetooth connection (the unit as a Bluetooth

receiver)

USB: USB jack (on the front panel)

NET: NETWORK sources (press repeatedly to select a desired

network source)

d ZONE switch

Changes the zone that is controlled by the remote control (p.108).

e SCENE keys

Select the registered input source, sound program, and various

settings with one touch. Also, turns on the unit when it is in

standby mode (p.75).

f PROGRAM keys

Select a sound program (p.77).

g External device operation keys

Select menus for external devices (p.158).

h ON SCREEN key

Displays the on-screen menu on the TV.

i Menu operation keys

Cursor keys: Select a menu or the parameter.

ENTER: Confirms a selected item.

RETURN: Returns to the previous screen.

j Radio keys

Operate the FM/AM radio when “TUNER” is selected as the input

source (p.83).

BAND: Switches between FM and AM radio.

PRESET: Select a preset station.

TUNING: Select the radio frequency.

External device operation keys

Let you play back and perform other operations for external devices

when an input source other than “TUNER” is selected (p.158).

k Sound mode keys

Select a sound mode (p.77).

l INFO key

Selects the information displayed on the front display (p.114).

m SLEEP key

Pressing this key repeatedly will specify the time (120 min, 90 min,

60 min, 30 min, off), in which the unit switches to the standby

mode.

n Numeric keys

Let you enter numerical values, such as radio frequencies.

MEMORY key

Registers FM/AM radio stations as presets (p.84).

o TV operation keys

Let you select TV input and volume, and perform other TV

operations (p.157).

p HDMI OUT key

Selects HDMI OUT jacks to be used for video/audio output (p.74).

q PARTY key

Turns on/off the party mode (p.109).

r VOLUME keys

Adjust the volume.

s MUTE key

Mutes the audio output.

t OPTION key

Displays the option menu (p.115).

u DISPLAY key

Displays status information on the TV (p.114).

v CODE SET key

Registers remote control codes of external devices on the remote

control (p.157).

X

To operate external devices with the remote control, register a remote

control code for each device before using (p.157).

ENTER

RETURN

POP-UP/MENU

TOP MENU

INPUT

MUTE

TV VOL TV CH

TV

321

AUDIO

2 431

6

V-AUX

75

AV

BLUETOOTH

NET

PHONO

USB

TUNER

4321

8765

9 0

MAIN

ZONE

234

41 2 3

SCENE

MUTE

OPTION

ON

SCREEN

DISPLAY

MODE

MOVIE MUSIC

INFO SLEEP

ENT

PRESETTUNING

VOLUME

PROGRAM

HDMI OUTPARTY

BAND

SUR. DECODE

STRAIGHT

ENHANCER PURE DIRECT

10

MEMORY

CODE SET

RECEIVER

SOURCE

q

s

p

t

u

v

a

c

b

e

d

f

r

g

n

m

o

h

j

k

l

i

En 19

PREPARATIONS

General setup procedure

1 Connecting speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.20)

2 Connecting a TV and playback devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.41)

3 Connecting the FM/AM antennas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.48)

4 Connecting a network cable or preparing the wireless antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.49)

5 Connecting other devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.50)

6 Connecting the power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.50)

7 Selecting an on-screen menu language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.51)

8 Configuring the necessary speaker settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.52)

9 Optimizing the speaker settings automatically (YPAO). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.53)

10 Connecting to a network device wirelessly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.65)

11 Connecting to the MusicCast network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.73)

This completes all the preparations. Enjoy playing movies, music, radio and other content with the unit!

En 20

1 Connecting speakers

The unit has 9 built-in amplifiers. You can connect 2 to 11 speakers and up to 2 subwoofers to create the favorite acoustic space in your room.

You can also apply bi-amp connections, channel expansion (using an external power amplifier) or multi-zone configurations to enhance your system (p.30).

Ideal speaker layout Functions of each speaker

X

• Use “Ideal speaker layout” (diagram on the left) as reference. You do not need to exactly adjust the speaker

layout to this diagram since the YPAO function of the unit will automatically optimize the speaker settings (such

as distances) to suit the speaker layout.

• When using only one surround back speaker, place it straight behind the listening position (middle of “SBL”

and “SBR” in the diagram).

• The unit creates front Virtual Presence Speaker (VPS) using the front, center, and surround speakers to produce

3-dimensional sound fields even when no front presence speakers are connected. However, we recommend

using front presence speakers in order to experience the full effect of the sound fields (and rear presence

speakers for further spatial sounds).

• (RX-A3060 only)

The unit creates rear Virtual Presence Speaker (VPS) using the front, center, and surround speakers to produce

natural 3-dimensional sound fields when front presence speakers are connected but no rear presence speakers.

Caution

Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”. In this case, you can also use 4-ohm speakers as the front speakers.

For details, see “Setting the speaker impedance” (p.27).

E

12

39

4

6

T Y

5

9

R

7

0.3 m (1 ft) or more