Yamaha TSX-B15D Omistajan opas

Brändi: Yamaha

Malli: TSX-B15D

Kategoria: Radios

Tyyppi: Omistajan opas

En Fr De

OWNER'S MANUAL

MODE D'EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

Sv It Es

i En

1 To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2 Install this unit in a well ventilated, cool, dry, clean

place - away from direct sunlight, heat sources,

vibration, dust, moisture and cold. For proper

ventilation, allow the following minimum clearances.

Top: 15 cm (6 in)

Rear: 10 cm (4 in)

Sides: 10 cm (4 in)

3 Locate this unit away from other electrical

appliances, motors, or transformers to avoid

humming sounds.

4 Do not expose this unit to sudden temperature

changes from cold to hot, and do not locate this unit

in an environment with high humidity (i.e. a room

with a humidifier) to prevent condensation inside this

unit, which may cause an electrical shock, fire,

damage to this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may

fall onto this unit and/or this unit may be exposed to

liquid dripping or splashing. On the top of this unit,

do not place:

– Other components, as they may cause damage

and/or discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause

fire, damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall

and liquid may cause electrical shock to the user

and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If

the temperature inside this unit rises, it may cause

fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may

overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall

outlet, grasp the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used.

Using this unit with a higher voltage than specified is

dangerous and may cause fire, damage to this unit,

and/or personal injury. Yamaha will not be held

responsible for any damage resulting from use of this

unit with a voltage other than specified.

13 To prevent damage by lightning, keep the power

cable disconnected from a wall outlet or this unit

during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact

qualified Yamaha service personnel when any

service is needed. The cabinet should never be

opened for any reasons.

15 When not planning to use this unit for long periods of

time (i.e. vacation), disconnect the AC power plug

from the wall outlet.

16 Be sure to read the “TROUBLESHOOTING” section

on common operating errors before concluding that

this unit is faulty.

17 Before moving this unit, press to set the system to

off, and disconnect the AC power plug from the wall

outlet.

18 Condensation will form when the surrounding

temperature changes suddenly. Disconnect the power

cable from the outlet, then leave this unit alone.

19 When using this unit for a long time, this unit may

become warm. Turn the system off, then leave this

unit alone for cooling.

20 Install this unit near the wall outlet and where the AC

power plug can be reached easily.

21 Be sure to use the AC adaptor supplied with this unit.

Using an AC adaptor other than the one provided

may cause fire or damage to this unit.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

This unit is not disconnected from the AC power source

as long as it is connected to the wall outlet, even if this

unit itself is turned off by . In this state, this unit is

designed to consume a very small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR

MOISTURE.

• This unit’s speakers use magnets. Do not place items

that are sensitive to magnetism, such as CRT-type TVs,

clocks, credit cards, floppy disks, etc., on or beside this

unit.

• There is a chance that placing this unit too close to a

CRT-based (Braun tube) TV set might impair picture

color. Should this happen, move this unit away from the

TV set.

Do not use this unit within 22 cm (9 inches) of persons

with a heart pacemaker implant or defibrillator implant.

Radio waves may affect electro-medical devices.

Do not use this unit near medical devices or inside

medical facilities.

We, Yamaha Music Europe GmbH hereby

declare that this unit is in compliance with the

essential requirements and other relevant

provisions of Directive 1999/5/EC.

Yamaha Music Europe GmbH

Siemensstr. 22-34 25462 Rellingen, Germany

Tel: +49-4101-303-0

1 En

PREPARATION

NAMES OF PARTS AND THEIR FUNCTIONS .................................................................................... 2

BASIC FUNCTIONS................................................................................................................................... 4

LISTENING TO FM STATIONS .............................................................................................................. 6

LISTENING TO DAB STATIONS............................................................................................................ 7

LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE .............................................................. 10

LISTENING TO EXTERNAL SOURCES ............................................................................................. 13

CHARGING WITH THE USB PORT .................................................................................................... 13

TROUBLESHOOTING ............................................................................................................................ 14

SPECIFICATIONS ................................................................................................................................... 17

■ Features

– Playback of Bluetooth devices, DAB/FM radio, and external devices with an AUX connector.

– Setting alarm using a DAB/FM radio.

– Supplying power to smartphones, tablets, etc. via USB port on the rear panel.

– Rich sound by 5cm full-range custom speaker and DSP (Digital Signal Processor) made by Yamaha.

– Enhanced treble and thick mid/bass, even when playing a compressed audio source, such as MP3, etc.

(Music Enhancer)

• indicates precautions for use of the unit and its feature limitations.

• indicates supplementary explanations for better use.

■ Supplied accessories

Note

AC adaptor DAB/FM antenna

DC 12 V, 1.5 A,

model number:

MU18-D120150-C5

Antenna for receiving DAB/FM.

Information for Users on Collection and Disposal of Old Equipment

This symbol on the products, packaging, and/or accompanying documents means that used electrical and

electronic products should not be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take them to applicable collection

points, in accordance with your national legislation and the Directives 2002/96/EC.

By disposing of these products correctly, you will help to save valuable resources and prevent any potential

negative effects on human health and the environment which could otherwise arise from inappropriate

waste handling.

For more information about collection and recycling of old products, please contact your local

municipality, your waste disposal service or the point of sale where you purchased the items.

[Information on Disposal in other Countries outside the European Union]

This symbol is only valid in the European Union. If you wish to discard these items, please contact your

local authorities or dealer and ask for the correct method of disposal.

CONTENTS

88.35 MHz

Volume 25

2 En

■ Top panel

NAMES OF PARTS AND THEIR FUNCTIONS

B Clock display

C Indicators

(Alarm): Lights when the alarm

function is on (☞ page 4).

RADIO: Lights when the radio is selected

as an input source (☞ page 6).

AUX: Lights when AUX is selected as an

input source (☞ page 13).

(Bluetooth):Lights when (Bluetooth)

is selected as an input

source or during Bluetooth

pairing/connection

(☞ page 10, 11).

Press to turn on the system or enter standby mode.

Eco Standby mode

• This can reduce power consumption. Press and hold for

more than 3 seconds to set the system to power saving mode.

All the indicators and displays turn off, and Bluetooth

operation, audio playback, input via buttons except are

disabled. To cancel Eco Standby mode, press .

• The alarm function is not available in Eco standby mode.

Auto Standby (☞ page 5)

• This unit has a function that automatically activates standby

mode. Since you do not have to turn on or off the system every

time, you can save energy.

y Dimmer function

When in standby mode, press DISPLAY

repeatedly to set the brightness of the

displays and indicators.

3 (brightest) 2 1 (darkest)

A Grille

(☞ page 3)

E VOLUME

Controls volume.

F DISPLAY

Switches the information display

(☞ page 8).

G OPTION (CLOCK)

• Sets the clock (☞ page 4).

• Sets options when DAB is

selected as a source

(☞ page 9).

H TUNING

• Changes DAB stations when

DAB is selected.

• Changes the radio frequency

when FM is selected.

I PRESET

Stores up to five favorite DAB/FM

radio stations (☞ page 6).

J SOURCE (PAIRING)

Selects an input source from

(Bluetooth), AUX, or RADIO.

D Information display

(☞ page 7)

NAMES OF PARTS AND THEIR FUNCTIONS

3 En

■ Rear panel

A grille is attached to this product to protect the speakers.

• Since the grille cloth is made of soft material, it can be easily damaged, so do not scratch it with a sharp object.

• Do not overstress the grille cloth. If it is overstressed, it will become contorted and damaged. This may cause damage to

the speakers. Be careful when handling the grille cloth.

Connecting the DAB/FM antenna

A Connect the supplied antenna to the

unit.

B Pin the antenna where the best

reception is obtained.

• The supplied antenna is for receiving DAB/FM.

• Be sure to stretch out the antenna as the illustration shows.

• If DAB/FM reception is poor, change the height or

direction of the antenna, or relocate the unit.

If you listen to a DAB/FM radio station while USB

charging, noise may interfere with the radio reception. In

this case, disconnect the USB cable from the unit.

Caution

L CHARGING

Supplies 5 V/

1 A to a

portable device,

such as a

smartphone,

when it is

connected with

a USB cable

(☞ page 13).

M 12 V

Connect the

supplied AC

adaptor.

N AUX

Connect external devices

with ø3.5mm stereo mini

plug cables (☞ page 13).

O FM ANT

DAB/FM

antenna

terminal

To AC wall outlet

P Alarm switch

(☞ page 4)

Note

Caution

4 En

OPERATION

This unit can play the radio and emit beeps at the set time.

■ Setting the time and sound

BASIC FUNCTIONS

Adjusting the clock

The time settings are lost approximately one week after

unplugging the unit.

A Press and hold OPTION for

more than 2 seconds.

The clock display flashes.

B Adjust the time with TUNING.

If you press and hold TUNING, the numbers

advance quickly.

C Press OPTION.

If you want to cancel clock setting mode, press .

• If you press PRESET in step B, you can select

the time display method (12 hours/24 hours).

• This unit’s clock can be updated in conjunction

with the clock information from the DAB station

when receiving DAB signals (☞ page 9) .

Alarm setting

A Set the alarm switch on

the rear panel to SET.

The alarm indicator ( ) and

clock display flash.

Set the alarm time with

TUNING

C Set the alarm volume with VOLUME.

The volume level is displayed on the information

display.

D Set the alarm source with SOURCE.

Select DAB or FM for the source that will be

played at the alarm time.

The playback source will be displayed on the

information display.

E Set the alarm switch to ON or OFF.

Alarm setting will be completed.

When the alarm switch on the rear panel is set to

ON, the alarm indicator ( ) will light.

Note

Alarm

indicator

()

Alarm switch

ON: Enables the alarm.

OFF: Disables the alarm.

SET: Sets the alarm.

BASIC FUNCTIONS

5 En

■ Switching the alarm on/off

At the set time, alarm sound plays back.

■ Stopping the alarm

The system automatically enters standby mode under the following circumstance.

• If no operation is performed for more than 8 hours while music is being played back or stopped.

• If more than 20 minutes have passed while all the 3 conditions (below) are met.

– Bluetooth is selected as a playback source.

– Bluetooth connection not established

– No operation

■ Activating/Deactivating Auto Standby

Press and hold PRESET for 3 seconds during standby mode. Auto Standby will alternately turn on and off.

The information will appear for several seconds on the clock display.

• Activate: ON (default setting)

• Deactivate: OFF

You can switch the alarm to ON or OFF

with the alarm switch.

When the alarm is on, the alarm indicator ( )

lights.

Operations during playing back alarm sound

Press .

• Unless you stop the alarm, the alarm stops after

60 minutes automatically.

• If you press any button except while the alarm is

activating, the alarm sound will stop for about 5 minutes

(snooze function).

Auto Standby

6 En

You can store up to five favorite FM radio stations with the preset function.

LISTENING TO FM STATIONS

Tuning radio stations

A Press SOURCE to select RADIO.

The RADIO indicator lights.

If you want to check if this unit is currently

receiving DAB or FM, see the information display.

B For automatic tuning, press and hold

TUNING.

For manual tuning, press TUNING

repeatedly.

If you tune into a station manually, the sound is monaural.

Presetting radio stations

A Press TUNING to select a favorite radio

station.

The radio frequency is displayed temporally.

B Press and hold PRESET for more than

2 seconds.

C Press TUNING to select the preset

number you want to store to.

D Press PRESET to complete.

Selecting preset radio stations

A Press SOURCE to select RADIO.

The RADIO indicator lights.

B Press PRESET repeatedly to select the

preset radio station.

RADIO indicator

Note

RADIO indicator

7 En

DAB (Digital Audio Broadcasting) and DAB+ use digital signals for clearer sound and more stable reception

compared to analog signals.

DAB+ is based on the original DAB standard but uses a more efficient audio codec.

DAB and DAB+ are broadcast in blocks of data called “ensembles” containing up to several radio stations that

are simultaneously broadcast.

DAB and DAB+ can also include an extensive amount of text information, enabling you to select a station by

name.

Other information, such as the ensemble name or the status of the digital signal, can be displayed on the

information display.

“DAB” described in this manual may also refer to “DAB+”.

y Full Scan

Before tuning into DAB stations, Full Scan must be performed. When you select the DAB for the first time,

Full Scan is performed automatically. It scans all the radio frequencies to search the receivable DAB stations.

LISTENING TO DAB STATIONS

Preparing for DAB reception

To perform Full Scan, press OPTION to scan manually.

Press SOURCE and set DAB as the

playback source.

The RADIO indicator lights and Full Scan starts.

During the scan, the degree of progress is displayed on

the information display.

Scan is completed.

“Completed” and the number of receivable DAB

stations appear on the information display.

Tuning DAB stations

A Press SOURCE and set DAB as the

playback source.

The RADIO indicator lights.

B Press TUNING to tune the DAB station.

While receiving DAB, switch on the information

display.

When the unit does not receive a DAB signal, “Off

Air” is displayed instead of the DAB station name.

RADIO indicator

Note

RADIO indicator

LISTENING TO DAB STATIONS

8 En

Use the preset function to store your favorite 5 stations.

1 Signal strength indicator:

Shows current signal strength.

2 Secondary indicator:

Some stations have sub (secondary) stations. If

a secondary station is playing, the secondary

indicator is displayed.

3 DAB station name

4 DAB station Information

For details, refer to “Switching DAB station

information”. (See below.)

Switching DAB station information

Press DISPLAY repeatedly to select DAB

station information.

Information is displayed in the order shown below.

Storing DAB stations (preset)

A Press TUNING to tune into your favorite

DAB station.

B Press and hold PRESET for more than

2 seconds.

C Press TUNING to select the preset

number you want to store to.

D Press PRESET to complete.

Selecting preset DAB stations

A Press SOURCE and set DAB as the

playback source.

The RADIO indicator lights.

B Press PRESET repeatedly to select the

preset DAB station.

Text information

¨ Ensemble name

( is displayed before the ensemble name.)

¨ Status 1 (channel label and frequency)

¨ Status 2 (MP2 or AAC+ and signal quality)

¨ Back to the top.

RADIO indicator

LISTENING TO DAB STATIONS

9 En

You can confirm the DAB signal level. This is useful when you set the antenna.

Confirming the reception

A Press OPTION when the source is “DAB”.

Option menu is shown on the information display.

B Press TUNING to select “Manual tune”

and press OPTION.

C Press TUNING to change the channel

label.

The measured DAB signal reception level is

displayed.

The level is from 0 (none) to 100 (best).

D Press OPTION to exit the option setting.

When performing Manual tune and the DAB signal is

weak, try adjusting the position of the antenna to

obtain good reception.

DAB optional settings

While listening to a DAB station, the functions listed below are available.

You can perform these functions by the following

steps.

A Press OPTION.

B Press TUNING to select the setting.

C Press OPTION to confirm.

“Option” menu Function ☞ page

Full Scan Scans stations manually. 7

Clock auto-update This unit’s clock can be updated automatically in conjunction with the clock

information received from DAB station. You can set this function to “ON”/

“OFF”. (Default setting is set to “OFF”.)

Manual tune You can specify the DAB frequency band and it shows the level of the DAB

signal. This function can be used when installing the DAB/FM antenna to

check the signal strength.

Back Exits the “Option” menu. -

10 En

This unit provides Bluetooth functionality. You can enjoy wireless music playback from your Bluetooth device

(smartphone, digital audio player, etc.). Please also refer to the owner’s manual of your Bluetooth device.

• This unit can be paired with up to eight connecting devices. When pairing with a ninth device has succeeded, pairing data for

the device with the oldest connection date will be deleted.

• If this unit is connected via Bluetooth to another device, press and hold SOURCE to disconnect the Bluetooth connection

before you perform the pairing operation.

■ Pairing (Registration)

LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE

Installation

Install in a stable place, being careful of

the following points:

• Do not place on top of steel or other

metal plates.

• Do not cover with a cloth, etc.

• Install in the same room as the device

with which signals are to be exchanged

(Bluetooth profile A2DP compatible

smartphone, digital audio player, etc.)

within a direct line-of-sight distance of

10 m (33 ft).

• Make sure there are no obstacles between

this unit and the

Bluetooth

device.

88.35 MHz

Within 10 m (33 ft)

Pairing this unit with your Bluetooth device

y What is pairing?

Pairing is an operation that registers the communicating device (subsequently called “the connecting

device”) with this unit. You will need to perform the pairing operation the first time you use your Bluetooth

device with this unit, or if the pairing settings have been deleted. Once pairing has been completed,

subsequent reconnection will be easy even after the Bluetooth connection is disconnected. If pairing is not

successful, refer to the item “Bluetooth” in “TROUBLESHOOTING” (☞ page 16).

Turn on the system.

B Press and hold SOURCE for more than

2 seconds to enter paring mode.

• Pairing mode lasts for 5 minutes.

• In paring mode, the Bluetooth indicator ( ) will light in

orange and blue alternately.

Note

Bluetooth indicator ( )

LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE

11 En

– If using an iPhone/iPad/iPod touch

– If using other than an iPhone/iPad/iPod touch

C On your iPhone/iPad/iPod touch, turn

“Settings” “Bluetooth” on.

The Bluetooth connection list will appear in

“Devices”.

(This procedure or display may differ depending

on the type of your iPhone/iPad/iPod touch.)

D From the Bluetooth connection list of the

connecting device, choose this unit

(TSX-B15D Yamaha).

• When pairing has been completed, your iPhone/iPad/

iPod touch will indicate “Connected”.

• The Bluetooth indicator ( ) will light in blue.

C Perform Bluetooth pairing on the

connecting device.

For details, refer to the owner’s manual of the

connecting device.

D From the Bluetooth connection list of the

connecting device, choose this unit

(TSX-B15D Yamaha).

When pairing has been completed, the Blue tooth

indicator ( ) will light in blue.

If you are prompted for a passkey, enter the numerals “0000”.

TSX-B15D Yamaha

Within about 5 minutes

TSX-B15D Yamaha

Within about 5 minutes

Check that the pairing process on the connecting device has been completed. If the pairing process fails,

start over from step B. For details, refer to the owner’s manual of the connecting device.

Note

Listening to a Bluetooth device

Press

SOURCE

to select (Bluetooth).

B Connect this unit and your connecting

device via Bluetooth.

C Play back music from your connecting

device.

Take care that the volume setting of this unit is not too high. We

recommend that you adjust the volume on the connecting

device.

88.35 MHz

Note

LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE

12 En

Once pairing with a device has been completed, connecting with that device via Bluetooth will be easy next

time.

■ Connecting from this unit

Press SOURCE to select (Bluetooth).

The Bluetooth indicator ( ) will light in orange.

This unit will search for the connecting device that was most recently connected via Bluetooth, and will then

establish a connection (You must first turn on the Bluetooth setting of the connecting device).

When the Bluetooth connection has been established, the Bluetooth indicator ( ) will light in blue.

Yamaha does not guarantee all connections between this unit and Bluetooth device.

If any of the following operations are performed while a Bluetooth connection is established, the Bluetooth

connection will be disconnected.

• Press and hold SOURCE for more than 2 seconds.

• Press SOURCE to select a playback source other than (Bluetooth).

• Press to enter standby mode.

• Disconnect the Bluetooth connection from the Bluetooth device.

Connecting an already-paired device via Bluetooth

Note

Disconnecting a Bluetooth connection

Bluetooth

• Bluetooth is a technology for wireless communication between devices within an area of about 10 meters (33 ft)

employing the 2.4 GHz frequency band, a band which can be used without a license.

• Bluetooth is a registered trademark of the Bluetooth SIG and is used by Yamaha in accordance with a license agreement.

Handling Bluetooth communications

• The 2.4 GHz band used by Bluetooth compatible devices is a radio band shared by many types of equipment. While

Bluetooth compatible devices use a technology minimizing the influence of other components using the same radio band,

such influence may reduce the speed or distance of communications and in some cases interrupt communications.

• The speed of signal transfer and the distance at which communication is possible differs according to the distance

between the communicating devices, the presence of obstacles, radio wave conditions and the type of equipment.

• Yamaha does not guarantee all wireless connections between this unit and devices compatible with Bluetooth function.

13 En

Connecting a portable device such as a smartphone or tablet computer to the USB port on this unit charges the

connected device (power supply of up to 5 V/1 A is supported).

Prepare a USB cable that is compatible with the portable device and confirm that the device is supported for

charging via USB connection before use. In addition, read the documentation provided with the portable

device.

LISTENING TO EXTERNAL SOURCES

A Connect your portable audio

device to AUX using a

commercially available 3.5 mm

(1/8 in) mini plug cable.

Turn down the volume of this unit and your

portable audio device before connection.

B Turn on the system.

C Press SOURCE to set the

playback source to AUX.

The AUX indicator lights.

Start playback on the connected

portable audio device.

CHARGING WITH THE USB PORT

Connect your portable device

to the USB port on this unit

using a commercially available

USB cable.

Charging automatically starts.

B Disconnect the USB cable

from the unit when charging

completes.

Check the charging status on the

portable device.

• The USB port is for charging use only. The

USB port does not support audio playback.

• Charging may not be possible depending on

the portable device.

• In Eco Standby mode, power supply stops,

and charging is not available.

• This unit does not function as memory

storage.

• Yamaha will not be held responsible for any

damage to the portable device or data loss

occurred while using this unit.

• Disconnect the USB cable immediately after

charging completes, since power continues to

be supplied to the connected device.

Rear panel

AUX indicator

Note

USB cable from

portable device

Rear panel

Note

14 En

Refer to the table below if the unit does not operate properly. If the problem you are experiencing is not listed

below, or if the instruction below does not help, press to enter standby mode, disconnect the power cable,

and contact the nearest authorized Yamaha dealer or service center.

y Resetting the unit

If this unit does not function properly, resetting this unit may solve the problem. To reset this unit, press and

hold for more than 5 seconds.

TROUBLESHOOTING

General

Problem Cause Solution

The speakers make no

sound.

The volume may be set to the minimum

level.

Adjust the volume level.

The source may be incorrect. Select the correct source.

The unit is setting the alarm. Set the alarm switch to ON or OFF to

complete the alarm setting.

Sound suddenly turns off.

Auto Standby function is enabled. Turn on the system and play the source again.

Deactivate the Auto Standby (☞ page 5).

Sound is cracked/

distorted or there is

abnormal noise.

Input source volume is excessive, or

volume of this unit is excessive.

Adjust the volume with VOLUME.

The unit does not operate

properly.

The unit may have received a strong

electrical shock such as lightning or

excessive static electricity, or power

supply may have dropped.

Press to enter standby mode and

disconnect the power cable. Wait about

30 seconds, reconnect the power cable, and

turn on the system.

The system turns on but

immediately shuts off.

The power cable may be connected

improperly.

Make sure the power cable is plugged into the

wall outlet firmly.

The unit may have received a strong

electrical shock such as lightning or

excessive static electricity.

Disconnect the power cable. Wait about

30 seconds, reconnect the power cable, and

turn on the system.

A digital or high-frequency

equipment produces

noises.

The unit may be placed too close to the

digital or high-frequency equipment.

Place the unit farther away from the

equipment.

The clock setting has been

cleared.

The unit is left more than one week after

you disconnect the power cable from the

wall outlet.

Plug the power cable into the wall outlet

firmly, and set the clock again (☞ page 4).

The clock flashes.

The unit is setting the clock. Press to cancel setting the clock.

The unit is setting the alarm. The alarm

switch on the rear panel is set to SET.

Set the alarm switch on the rear panel to ON

or OFF to complete the setting.

TROUBLESHOOTING

15 En

DAB reception

Problem Cause Solution

Cannot tune into any DAB

stations.

Full Scan operations were not performed. Perform Full Scan operations (☞ page 7).

There is no DAB coverage in your area. Check with your dealer or WorldDMB Online

at “http://www.worlddab.org” for a listing of

the DAB coverage in your area.

The DAB signals are too weak. Change the height, direction, or placement of

the antenna.

Full Scan operations are

not successful and “Not

found” appears on the

information display.

The DAB signals are too weak.

There is no DAB coverage in your area. Check with your dealer or WorldDMB Online

at “http://www.worlddab.org” for a listing of

the DAB coverage in your area.

The positioning of the antenna is not

optimal for DAB reception.

Use the Manual tune feature to conform the

best position of the antenna (☞ page 9).

The DAB station reception

is weak.

The DAB signals are too weak. Change the height, direction, or placement of

the antenna.

No DAB radio reception

even after performing Full

Scan.

Reception strength of DAB radio is poor. Check reception strength in “Manual tune” in

the “Option” menu (☞ page 9), and adjust the

antenna height or orientation, or place it in a

different location.

DAB radio reception is

weak or noisy.

There is multi-path interference. Check reception strength in “Manual tune” in

the “Option” menu (☞ page 9), and adjust the

antenna height or orientation, or place it in a

different location.

Your area is too far from the DAB station

transmitter.

Use an outdoor antenna. We recommend

using a sensitive multi-element antenna.

DAB information is not

available or is inaccurate.

The selected DAB radio station may be

temporarily out of service or may not

provide information.

Contact the DAB broadcaster.

No DAB radio sound.

The selected DAB radio station may be

temporarily out of service.

Try the station later or select another station.

Use the Manual tune feature to conform the

best position of the antenna (☞ page 9).

There is noise interference

(e.g. hiss, crackle, or

jitter).

The antenna needs to be repositioned. Change the height, direction, or placement of

the antenna.

The DAB signals are too weak.

FM radio reception

Problem Cause Solution

Too much noise during

stereo broadcast.

The radio station you selected may be far

from your area, or the radio wave

reception is weak in your area.

Try manual tuning to improve the signal

quality (☞ page 6) or change the height or

direction of the antenna, or relocate the unit

(☞ page 3).

TROUBLESHOOTING

16 En

Bluetooth

Problem Cause Solution

Cannot make this unit

paired with the connecting

device.

The connecting device does not support

A2DP.

Perform pairing operations with a device

which supports A2DP.

The passkey of the connecting device that

you want to pair with this unit is a passkey

other than “0000”.

Use a connecting device with a passkey

“0000”.

This unit and the connecting device are

too far apart.

Move the connecting device closer to this

unit.

There is a device (microwave oven,

wireless LAN, etc.) that outputs signals in

the 2.4 GHz frequency band nearby.

Move this unit away from the device that is

emitting radio-frequency signals.

The unit is in standby mode.

Turn the unit on and perform paring (

☞

page 10).

Another Bluetooth device is connected. Terminate current Bluetooth connection, and

perform pairing with the new device.

Cannot establish a

Bluetooth connection.

This unit is not registered on the connecting

device’s Blue too th connection list.

Perform pairing operations again (☞ page

10).

Another Bluetooth device is connected. Terminate current Bluetooth connection, then

establish a Bluetooth connection with that

device again.

The Bluetooth function of the device is

turned off.

Turn on the Bluetooth function of the device.

The pairing information has been deleted. Perform pairing again (☞ page 10).

This unit can be paired with eight devices. If

pairing with a ninth device is performed, the

pairing information with the oldest connection

date will be deleted.

Delete any pairing history of TSX-B15D on

the iPhone/iPad/iPod touch, then pair with the

TSX-B15D again (☞ page 10).

No sound is produced or

the sound is interrupted

during playback.

The Bluetooth connection of this unit with

the connecting device is disconnected.

Perform Bluetooth connection operations

again (☞ page 12).

This unit and the connecting device are

too far apart.

Move the connecting device closer to this

unit.

There is a device (microwave oven,

wireless LAN, etc.) that outputs signals in

the 2.4 GHz frequency band nearby.

Move this unit away from the device that is

emitting radio-frequency signals.

The connecting device’s Bluetooth

function is off.

Turn on the Bluetooth function of the

connecting device.

The connecting device is not set to send

Bluetooth audio signals to this unit.

Check that the Bluetooth function of the

connecting device is set properly.

The pairing setting of the connecting

device is not set to this unit.

Set the pairing setting of the connecting

device to this unit.

The connecting device’s volume is set to

the minimum.

Increase the volume level.

The connecting device is connected to

more than two Bluetooth speakers and this

unit (TSX-B15D) is not selected as a

playback device.

Select this unit as a playback device for the

connecting device.

USB port charging

Problem Cause Solution

Cannot charge the

connected portable USB

device.

An incompatible USB device is connected

to the unit. Or the USB device is not

connected to this unit properly.

Press to enter standby mode, and reconnect

the USB device to the unit. If it does not

resolve the problem, the USB device is not

chargeable with the unit.

17 En

■ PLAYER SECTION

AUX IN

• Input connector

............STEREO L/R: 3.5 mm (1/8 in) STEREO mini Jack

■ AMPLIFIER SECTION

• Driver unit .........................5 cm (2 in) full-range driver × 2

■ Bluetooth SECTION

• Bluetooth version.....................................................Ver. 3.0

• Supported protocols....................................................A2DP

• Supported codecs................................................SBC, AAC

• Wireless output.........................................Bluetooth Class 1

• Maximum communication distance

...................................... 10 m (33 ft) (without obstructions)

■ TUNER SECTION

• Tuning range

FM ......................................................87.50 to 108.00 MHz

DAB/DAB+.............................. 174 to 240 MHz (Band III)

■ CHARGING CONNECTOR SECTION

• Connector type ................................................. USB type A

• Output rating............................................................5 V/1 A

■ GENERAL

• Power Supply............................ AC 100 to 240 V 50/60 Hz

• Power consumption .....................................................10 W

• Standby consumption

(Clock displayed, Bluetooth ready for connection) ....1.1 W

• Eco Standby consumption ..........................................0.3 W

• Weight........................................................ 1.0 Kg (2.2 lbs.)

• Dimensions

Specifications are subject to change without notice.

■ For U.K. customers

If the socket outlets in the home are not suitable for the plug

supplied with this appliance, it should be cut off and an

appropriate 3 pin plug fitted. For details, refer to the

instructions described below.

The plug severed from the mains lead must be destroyed, as a

plug with bared flexible cord is hazardous if engaged in a live

socket outlet.

This unit supports DAB/DAB+ tuning.

■ Special Instructions for U.K.

Model

SPECIFICATIONS

180 mm (7-1/8 in)

200 mm (7-7/8 in)

100 mm (3-7/8 in)

iPad, iPhone, and iPod touch are trademarks of Apple

Inc., registered in the U.S. and other countries.

Note

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows:

The wire which is coloured BLUE must be connected

to the terminal which is marked with the letter N or

coloured BLACK. The wire which is coloured

BROWN must be connected to the terminal which is

marked with the letter L or coloured RED.

Make sure that neither core is connected to the earth

terminal of the three pin plug.

i Fr

1 Pour utiliser l’appareil au mieux de ses possibilités,

lisez attentivement ce mode d’emploi. Conservez-le

soigneusement pour référence.

2 Installez cet appareil dans un endroit frais, bien aéré,

sec et propre - à l’abri de la lumière du soleil, des

sources de chaleur, des vibrations, des poussières, de

l’humidité et du froid. Pour une aération correcte,

tenez compte des distances minimales suivantes.

Au-dessus : 15 cm

À l’arrière : 10 cm

Sur les côtés : 10 cm

3 Placez l’appareil loin des équipements, moteurs et

transformateurs électriques, pour éviter les

ronflements parasites.

4 N’exposez pas l’appareil à des variations brutales de

température, ne le placez pas dans un environnement

très humide (par exemple dans une pièce contenant

un humidificateur) car cela peut entraîner la

condensation d’humidité à l’intérieur de l’appareil

qui elle-même peut être responsable de décharge

électrique, d’incendie, de dommage à l’appareil ou de

blessure corporelle.

5 Evitez d’installer l’appareil dans un endroit où des

objets peuvent tomber, ainsi que là où l’appareil

pourrait être exposé à des éclaboussures ou des gouttes

d’eau. Sur le dessus de l’appareil, ne placez pas :

– d’autres appareils qui peuvent endommager la

surface de l’appareil ou provoquer sa décoloration.

– des objets se consumant (par exemple, une

bougie) qui peuvent être responsables d’incendie,

de dommage à l’appareil ou de blessure

corporelle.

– des récipients contenant des liquides qui peuvent

être à l’origine de décharge électrique ou de

dommage à l’appareil.

6 Ne couvrez pas l’appareil d’un journal, d’une nappe,

d’un rideau, etc. car cela empêcherait l’évacuation de

la chaleur. Toute augmentation de la température

intérieure de l’appareil peut être responsable

d’incendie, de dommage à l’appareil ou de blessure

corporelle.

7 Ne branchez pas la fiche du câble d’alimentation de

l’appareil sur une prise secteur aussi longtemps que

tous les raccordements n’ont pas été effectués.

8 Ne pas faire fonctionner l’appareil à l’envers. Il

risquerait de chauffer et d’être endommagé.

9 N’exercez aucune force excessive sur les

commutateurs, les boutons et les cordons.

10 Pour débrancher la fiche du câble d’alimentation au

niveau de la prise secteur, saisissez la fiche et ne tirez

pas sur le cordon.

11 Ne nettoyez pas l’appareil au moyen d’un solvant

chimique, ce qui pourrait endommager la finition.

Utilisez un chiffon sec et propre.

12 N’alimentez l’appareil qu’à partir de la tension

prescrite. Alimenter l’appareil sous une tension plus

élevée est dangereux et peut être responsable

d’incendie, de dommage à l’appareil ou de blessure

corporelle. Yamaha ne saurait être tenue responsable

des dommages résultant de l’alimentation de

l’appareil sous une tension autre que celle prescrite.

13 Pour empêcher tout dommage causé par les éclairs,

déconnectez la câble d’alimentation et toute antenne

extérieure de la prise murale pendant un orage.

14 Ne tentez pas de modifier ni de réparer l’appareil.

Consultez le service Yamaha compétent pour toute

réparation qui serait requise. Le coffret de l’appareil

ne doit jamais être ouvert, quelle que soit la raison.

15 Si vous envisagez de ne pas vous servir de l’appareil

pendant une longue période (par exemple, pendant

les vacances), débranchez la fiche du câble

d’alimentation au niveau de la prise secteur.

16 Lisez la section intitulée « GUIDE DE

DÉPANNAGE » où figurent une liste d’erreurs de

manipulation communes avant de conclure que

l’appareil présente une anomalie de fonctionnement.

17 Avant de déplacer l’appareil, appuyez sur pour

éteindre le système puis débranchez la fiche du câble

d’alimentation au niveau de la prise secteur.

18 La condensation se forme lorsque la température

ambiante change brusquement. En ce cas, débranchez

la fiche du câble d’alimentation et laissez l’appareil

reposer.

19 La température de l’appareil peut augmenter en

raison d’une utilisation prolongée. En ce cas, coupez

l’alimentation de l’appareil et laissez-le au repos pour

qu’il refroidisse.

20 Installez cet appareil à proximité de la prise secteur et

à un emplacement où la fiche du câble d’alimentation

est facilement accessible.

21 Utilisez l’adaptateur secteur fourni avec cet appareil.

L’emploi de tout autre adaptateur secteur peut causer

un incendie ou endommager l’appareil.

ATTENTION : VEUILLEZ LIRE CE QUI SUIT AVANT D’UTILISER

L’APPAREIL.

Cet appareil n’est pas déconnecté du secteur tant qu’il

reste branché à la prise de courant, même si l’appareil en

soi est éteint par la touche . Dans cet état, l’appareil

consomme une très faible quantité de courant.

AVERTISSEMENT

POUR RÉDUIRE LES RISQUES D’INCENDIE OU DE

DÉCHARGE ÉLECTRIQUE, N’EXPOSEZ PAS CET

APPAREIL À LA PLUIE OU À L’HUMIDITÉ.

• Les haut-parleurs de cet appareil utilisent des aimants. Ne

placez pas d’objets sensibles au magnétisme comme un

téléviseur à écran cathodique, une horloge, des cartes de

crédit, des disquettes etc. au-dessus ou près de cet appareil.

• Il y a un risque possible de création d’interférences,

visibles sur les images en couleurs si cet appareil est

placé à côté d’un téléviseur à tube cathodique (tube de

Braun). Dans ce cas, éloigner l’unité du téléviseur.

Ne pas utiliser cet appareil à moins de 22 cm de personnes

ayant un stimulateur cardiaque ou un défibrillateur.

Les ondes radio peuvent avoir une incidence sur les

équipements électroniques médicaux.

N’utilisez pas cet appareil à proximité d’équipements

médicaux ou à l’intérieur d’institutions médicales.

Sivu latautuu ...

Yamaha TSX-B15D Omistajan opas

Brändi: Yamaha

Malli: TSX-B15D

Kategoria: Radios

Tyyppi: Omistajan opas

Lataa PDF

raportti

muilla kielillä

Türkçe: Yamaha TSX-B15D El kitabı
English: Yamaha TSX-B15D Owner's manual
svenska: Yamaha TSX-B15D Bruksanvisning
русский: Yamaha TSX-B15D Инструкция по применению
italiano: Yamaha TSX-B15D Manuale del proprietario
Deutsch: Yamaha TSX-B15D Bedienungsanleitung
dansk: Yamaha TSX-B15D Brugervejledning
français: Yamaha TSX-B15D Le manuel du propriétaire
español: Yamaha TSX-B15D El manual del propietario
Nederlands: Yamaha TSX-B15D de handleiding

Yamaha TSX-B15D Omistajan opas

Yamaha TSX-B15D Omistajan opas

muilla kielillä

Liittyvät paperit

Muut asiakirjat