Auriol HG00073A Operation and Safety Notes

IAN 270302

TEMPERATURSTATION

Bedienungs- und Sicherheitshinweise

TEMPERATURSTATION

Bruksanvisning och säkerhetsanvisningar

LÄMPÖMITTARI

Käyttö- ja turvallisuusohjeet

VEJRSTATION

Brugs- og sikkerhedsanvisninger

ST A TION MÉTÉO

Instructions d‘utilisation et consignes de sécurité

TEMPERATUURSTATION

Bedienings- en veiligheidsinstructies

TEMPERATURE STATION

Operation and Safety Notes

TEMPERATURE STATION

GB / IE Operation and

Safety Notes Page 5

FI Käyttö- ja turvallisuusohjeet Sivu 28

SE Bruksanvisning och

säkerhetsanvisningar Sidan 50

DK Brugs- og

sikkerhedsanvisninger Side 72

FR / BE Instructions d‘utilisation et

consignes de sécurité Page 95

NL /BE Bedienings- en

veiligheidsinstructies Pagina 120

DE / AT / CH Bedienungs- und

Sicherheitshinweise Seite 144

A

10

13

12

17

24

11

B

27 26

14 9

2

5

15

8

16

231822 21 19 20

25

1

3467

D

29

C

28

30

32 31

5 GB/IE

Proper use ............................................ Page 6

Description of parts and

features

................................................. Page 6

Technical data .................................... Page 7

Safety ..................................................... Page 8

General safety information .................. Page 9

Safety instructions for batteries ............ Page 10

Before initial use

General information ............................. Page 12

Preparing to use the outdoor sensor ... Page 13

Preparing the temperature station

for use .................................................... Page 14

Temperature station .............................. Page 16

External sensor ...................................... Page 16

Setting the language / time zone /

time / date manually ............................. Page 17

Displaying summer time ....................... Page 19

Calling up the time zone ...................... Page 19

Setting the alarm time ........................... Page 19

Calling up the alarm times ................... Page 20

Switching the alarm on / off ................. Page 20

Using the snooze button ...................... Page 21

Displaying temperature ........................ Page 21

Calling up the minimum / maximum

values .................................................... Page 21

Displaying temperature trends ............. Page 22

Battery state display ............................. Page 22

Replacing the batteries ......................... Page 22

Troubleshooting ................................ Page 23

Cleaning and maintenance ......... Page 24

Disposal ................................................. Page 24

Declaration of conformity ........... Page 25

Warranty .............................................. Page 26

6 GB/IE

Temperature station

Proper use

The temperature station displays the indoor

and outdoor temperatures in Celsius (°C) or

Fahrenheit (°F) and their maximum and mini-

mum values. The temperature station also

displays the time in 12 / 24-hour clock modes

and the date. In addition, the temperature sta-

tion has an alarm function. The device is not

intended for commercial use.

Description of parts

and features

LC display

1

Temperature trend (outdoor temperature)

2

Outdoor temperature

3

symbol (outdoor sensor)

4

MAX- / MIN display for indoor

temperature

5

Temperature trend (indoor temperature)

6

Indoor temperature

7

symbol (temperature station)

8

Time

9

Z

symbol (snooze function)

10

Seconds display

11

symbol

12

Day of the week display

13

Date display (day / month)

14

DST display (summer time)

15

/ symbol (Alarm 1 / Alarm 2)

7 GB/IE

16

2

nd

time zone (ZONE)

17

MAX- / MIN display (outdoor temperature)

Temperature station

18

Z

/ REGISTER button (snooze function /

REGISTER)

19

SELECT button

20

SET / RESET button

21

ALARM button

22

CLOCK button

23

Hanging slot

24

Battery compartment

25

Stand

26

Screw (ø 3 mm)

27

Dowel (ø 7.7 mm)

Outdoor sensor

28

Control LED

29

Hanging slot

30

Battery compartment

31

Screw (ø 3 mm)

32

Dowel (ø 7.7 mm)

Technical data

Temperature station:

Temperature

measurement range: 0 – + 50 °C

+32 – +122 °F

Note: If the temperature is ≤0 °C (32 °F),

the LC display shows “LL.L”. If the temperature

is ≥50 °C (122 °F), the LC display shows

“HH.H”.

8 GB/IE

Temperature interval: 0.1 °C

Radio signal: DCF

Batteries: 2 x AA 1.

5 V

(included)

Outdoor sensor:

Temperature

measurement range: –20 °C – +60 °C

–4 °F – +140 °F

Note: If the temperature is ≤–20 °C

(–4 °F), the LC display shows “LL.L”. If the

temperature is ≥60 °C (140 °F), the LC dis-

play shows “HH.H”.

HF transmission signal: 433 MHz

HF transmission range: max. 30 metres

(in open area)

Batteries: 2 x AA 1.

5 V

(included)

Protection class: IPX3

Safety

YOU SHOULD STORE ALL

SAFETY

INFORMATION AND

INSTRUC

TIONS IN A SAFE

PLACE IN CASE

YOU NEED

TO REFER TO THEM AGAIN

IN THE FUTURE!

9 GB/IE

General safety

information

This appliance can be used

by children aged from 8 years

and above and persons with

reduced physical, sensory or

mental capabilities or lack of

experience and knowledge

if they have been given super-

vision or instruction concern-

ing use of the appliance in a

safe way and understand the

hazards involved. Children

shall not play with the appli-

ance. Cleaning and user

maintenance shall not be

made by children without

supervision.

Do not expose the device to

an extremely high electromag-

netic ﬁeld. This may impair

10 GB/IE

the correct functioning of the

device.

Please note that the guaran-

tee does not cover damage

caused by incorrect handling,

non-compliance with the op-

erating instructions or inter-

ference with the device by

unauthorised individuals.

Safety instructions

for batteries

DANGER

TO LIFE! Batteries can be

swallowed, which may rep-

resent a danger to life. If a

battery has been swallowed,

medical help is required im-

mediately.

Remove the batteries from

the device if they are not

11 GB/IE

going to be used for a pro-

longed period.

CAUTION!

DANGER OF

EXPLOSION! Never re-

charge batteries which are

not rechargeable.

When inserting the batteries,

ensure the correct polarity!

This is shown in the battery

compartments.

Remove spent batteries im-

mediately from the device.

There is an increased danger

of leaks!

Keep batteries away from

children do not throw the bat-

teries in the ﬁre, short-circuit

them or take them apart.

Always replace all the bat-

teries at once.

12 GB/IE

Use batteries of the same

type only. Otherwise there is

a risk of an explosion.

If the batteries have leaked

i

nside your device, you sh

ould

remove them immediately in

order to prevent damage to

the device!

Avoid contact with the skin,

eyes and mucous memb

ranes.

Any parts of the body com-

ing into contact with battery

acid should be rinsed oﬀ with

copious amounts of water

and / or a doctor contacted

if necessary!

Before initial use

Put the batteries first into the outdoor

sensor, then into the temperature

station.

General information

CAUTION! When choosing where to

position the temperature station, make sure

13 GB/IE

that it is not exposed to direct sunlight, vibra-

tions, dust, heat, cold or moisture. Do not place

the temperature station or external sensor near

to heat sources, e.g. radiators, as this may re-

sult in damage to the instruments.

Place the temperature station on the ac-

companying stand

25

.

Please ensure that neighbouring devices

are not operated at the same frequency

of 433 MHz. Such devices may cause

interference to the radio connection.

Do not place the devices next to or on

metal plates. Otherwise the quality of ra-

dio wave transmission may be reduced.

Radio signal (DCF):

The DCF signal (time signal transmitter) is

made up of time pulses transmitted from one

of the highest precision clocks in the world

close to Frankfurt / Main in Germany – it var-

ies by 1 second in 1million years.

In ideal conditions, your temperature station

can pick up this signal over a distance of up

to approx. 1,500 km around Frankfurt / Main.

Preparing to use

the outdoor sensor

Inserting the batteries:

Remove the battery compartment cover

from the back of the outdoor sensor.

Insert two 1.

5 V

batteries (AA) (in-

cluded) into the battery compartment

30

.

14 GB/IE

Note: Make sure you ﬁt the batteries the

right way round (polarity). This is shown

in the battery compartment (see. ﬁg D).

The outdoor sensor is now ready for use

and the control LED

28

illuminates brieﬂy.

Close the battery compartment cover.

If this does not work, carry out a restart,

if necessary. To do this, press and keep

pressed the Z

Z

/ REGISTER button

18

.

Preparing the temperature

station for use

Inserting the batteries:

Open the battery compartment

24

on the

back of the temperature station.

Insert two 1.5 V batteries (AA) (in-

cluded) into the battery compartment.

Note: Make sure you ﬁt the batteries the

right way round (polarity). This is shown

on the battery compartment (see. ﬁg B).

Close the battery compartment cover.

Connecting the temperature station

with

the outdoor sensor and the DCF

radio signal:

After the batteries have been inserted, the

temperature station attempts to establish a

connection with the outdoor sensor. This pro-

cess can take a few minutes. The

symbol

ﬂashes. Once the device has successfully con-

nected to the external sensor, the

symbol

stops ﬂashing and the temperature is shown

in the LC display.

15 GB/IE

Note: If the temperature station does not

receive the signal from the outdoor sensor

within 3 minutes, the temperature station

automatically starts with the reception of the

radio time signal.

After successful reception of the outdoor sen-

sor signal or after 3 minutes, the temperature

station starts with the reception of the radio

time signal. This process can take up to 5 min-

utes and is indicated in the LC display by the

ﬂashing

symbol

11

.

After successful reception of the DCF radio

signal, the

symbol is displayed continuously

in the LC display.

Note: Do not move the temperature station

while it is receiving the signal. Otherwise this

could interfere with reception.If synchronisation

is not possible when the temperature station

is being ﬁrst set up, try changing the location

(e.g. place the temperature station near to a

window).

Reception may be considerably reduced by

obstructions (e.g. concrete walls) or sources

of interference (e.g. other electrical devices).

If the reception of the radio signal continues

to be interrupted, you can set the time and

date manually (see “Setting the language /

time zone / time / date manually”).

16 GB/IE

Mounting the temperature station

and / or the outdoor sensor on a wall:

Note: You will require an electric drill and a

crosshead screwdriver for this step.

CAUTION! DANGER TO LIFE, RISK

OF INJURY AND MATERIAL DAMAGE!

Read the operating and safety instructions for

your drill carefully.

DANGER TO LIFE!

Take care that you do not hit electricity, gas

or water lines when you drill into the wall. If

necessary, check with a pipe and cable de-

tector before drilling.

Temperature station

Mark the position of the hole (ø approx.

7.7 mm) on the wall.

Drill the hole with an electric drill.

Insert the dowel

27

into the drilled hole.

Using a crosshead screwdriver, screw the

screw

26

into the dowel.

Hang the temperature station by placing

the hanger

23

on the screw.

External sensor

Mark the position of the hole (ø approx.

7.7 mm) on the wall.

Drill the hole with an electric drill.

Insert the dowel

32

into the drilled hole.

Using a crosshead screwdriver, screw the

screw

31

into the dowel.

17 GB/IE

Hang the external sensor by placing the

hanger

29

on the screw.

Note: Ensure that the external sensor does

not come into contact with water or direct

sunlight. Electronic devices may adversely

aﬀect the wireless signal reception.

Setting the language / time

zone / time / date manually

The reception of DCF radio signal where the

temperature station has been positioned may

become degraded or interrupted. If this hap-

pens you can set the device manually.

1. Press and hold down the CLOCK button

22

for about 3 seconds.

2. Press the SET / RESET button

20

to switch

between the 12- and 24-hour clock dis-

play modes.

3. Press the CLOCK button to conﬁrm your

settings. The language option ﬂashes.

Tip: If you press and hold down the SET /

RESET button, you accelerate the process

and reach the desired value more quickly.

This quicker method can also be used for

making the following settings. If during

a period of 30seconds no buttons are

pressed, the LC display returns automati-

cally to the default display.

4. Press the SET / RESET button to set the

desired language (GE = German,

FR = French, SP = Spanish, IT = Italian,

EN = English).

18 GB/IE

5. Press the CLOCK button to conﬁrm your

settings. The time zone display ﬂashes.

6. Press the SET / RESET button to set the

desired time zone for time zone 2 (–12

hours to +12hours).

Note: Should you be in a country in

which the DCF signal can be received but

the time is diﬀerent to your current local

time, you can use the time zone setting to

have the clock display your current local

time. If you ﬁnd yourself in a country in

which, for example, the local time is an

hour ahead of Central European Time

(CET), you set the time zone to +01. The

clock is now still controlled by DCF but

shows the time as one hour ahead of

CET. If you wish to know what the time is

in the USA for example, then simply by

setting the time zone value to e.g. –10

you will obtain the current local time in

Los Angeles etc.

7. Press the CLOCK button to conﬁrm your

settings. The hour display ﬂashes.

8. Press the SET / RESET button to set the

desired value.

9. Press the CLOCK button to conﬁrm your

settings.

10. Repeat steps 6 and 7 to set the values for,

minutes, seconds

10

, year and date

13

(day / month).

Note: The seconds display can only be

reset to 00.

19 GB/IE

11. After this, the LC display returns to the de-

fault display.

Displaying summer time

Summer time is indicated by the DST symbol

14

in

the LC display. The temperature station

au-

tomatically detects from the DCF radio signal

whether it is summer time or not.

Calling up the time zone

The default display shows the time zone ac-

cording to the information provided by the

DCF signal.

Press the CLOCK button

22

. The time

zone

16

appears in the LC display.

Press the CLOCK button again to return

to the default display.

Setting the alarm time

You can set two diﬀerent alarm times.

1. Press and hold down the ALARM button

21

for about 3 seconds.

Note: If an alarm time has been set be-

fore, then that previously set alarm time

appears in the LC display. If not, then the

display shows 0:00 or AM 12:00.

2. The hour display ﬂashes. Press the SET /

RESET button

20

to set the desired value.

3. Press the ALARM button to conﬁrm your

settings. The minute display ﬂashes.

20 GB/IE

4. Press the SET / RESET button to set the de-

sired value.

5. Press the ALARM button to conﬁrm your

settings.

6. Repeat steps 2 to 5 to set the time for

Alarm 2.

Calling up the alarm times

Press ALARM button

21

once or twice to

call up the set time for Alarm 1 or Alarm

2 respectively.

Press the ALARM button again to return

to the default display.

Switching the alarm on / oﬀ

Press the SET / RESET button

20

once to

activate Alarm 1. Press the SET / RESET

button twice to activate Alarm 2. Press the

SET / RESET button three times to activate

Alarm1 and Alarm 2.

Note: The symbol

or appears in the

LC display.

The alarm signal sounds as soon as the

set alarm time is reached. The alarm sig-

nal ceases automatically after a period

of 2minutes.

Press the ALARM button

21

to switch oﬀ

the alarm signal before it switches oﬀ au-

tomatically.

Note: The alarm signal sounds every

day at the set time.

Press the SET / RESET button three times

to deactivate Alarm 1. Press the SET /

Sivu latautuu...

Auriol HG00073A Operation and Safety Notes

Tämä ohje sopii myös

Auriol HG00073A Operation and Safety Notes

muilla kielillä

Aiheeseen liittyviä papereita

Muut asiakirjat