Yamaha RX-V683 Pikaopas

Safety Instructions ................................................ 2

Connections .......................................................... 5

Basic operations ................................................. 16

English

Consignes de sécurité......................................... 20

Raccordements................................................... 23

Fonctionnement de base .................................... 34

Français

Instrucciones de seguridad................................. 38

Conexiones ......................................................... 41

Operaciones básicas .......................................... 52

Español

Instruções de segurança..................................... 56

Conexões ............................................................ 59

Operações básicas ............................................. 70

Português

Правила техники безопасности ...................... 74

Подключения .................................................... 77

Основные операции.......................................... 88

Русский

AV Receiver

Ampli-tuner audio-vidéo

Quick Start Guide

Guide de démarrage rapide

Guía de inicio rápida

Guia de Iniciação Rápida

Краткое руководство по началу работы

EN

FE

ES

PT

RU

GFS

2 En

1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future

reference.

2 Install this sound system in a well ventilated, cool, dry, clean place - away from direct sunlight, heat

sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following minimum

clearances.

Top: 30 cm, Rear: 20 cm, Sides: 20 cm

3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming

sounds.

4 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in

an environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside

this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be exposed

to liquid dripping or splashing. On the top of this unit, do not place:

– Other components, as they may cause damage and/or discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user

and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat

radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or

personal injury.

7 Do not plug in this unit to a wall outlet until all connections are complete.

8 Do not operate this unit upside-down. It may overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall outlet, grasp the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified

is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will not be

held responsible for any damage resulting from use of this unit with a voltage other than specified.

13 To prevent damage by lightning, keep the power cable and outdoor antennas disconnected from a

wall outlet or this unit during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact qualified Yamaha service personnel when any

service is needed. The cabinet should never be opened for any reasons.

15 When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power

plug from the wall outlet.

16 Be sure to refer to the “Troubleshooting” section of the Owner’s Manual on the CD-ROM for

common operating errors before concluding that this unit is faulty.

17 Before moving this unit, press z to set it to standby mode and disconnect the AC power plug from

the wall outlet.

18 VOLTAGE SELECTOR (Taiwan, Brazil and General models)

The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage

BEFORE plugging into the AC wall outlet. Voltages are:

.........................................................................................................AC 110-120/220-240 V, 50/60 Hz

19 Condensation will form when the surrounding temperature changes suddenly. Disconnect the power

cable from the outlet, then leave this unit alone.

20 When using this unit for a long time, this unit may become warm. Turn the power off, then leave this

unit alone for cooling.

21 Install this unit near the AC outlet and where the AC power plug can be reached easily.

22 Excessive sound pressure from earphones and headphones can cause hearing loss.

English

z (power) key

Turns on the power of this unit or sets it to the standby mode.

This product is for ordinary homes. Do not use for applications requiring high reliability, such as

managing lives, health care or high-value assets.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

This unit is not disconnected from the AC power source as long as it is connected to the wall outlet,

even if this unit itself is turned off by z. This state is called the standby mode. In this state, this unit

is designed to consume a very small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO

RAIN OR MOISTURE.

En 3

■ Notes on remote controls and batteries

• Do not spill water or other liquids on the remote control.

• Do not drop the remote control.

• Do not leave or store the remote control in the following conditions:

– places of high humidity, such as near a bath

– places of high temperatures, such as near a heater or stove

– places of extremely low temperatures

– dusty places

• Insert the battery according to the polarity markings (+ and -).

• Change all batteries if you notice the following conditions:

– the operation range of the remote control narrows

– the transmit indicator does not flash or is dim

• If the batteries run out, immediately remove them from the remote control to prevent an explosion

or acid leak.

• If you find leaking batteries, discard the batteries immediately, taking care not to touch the leaked

material. If the leaked material comes into contact with your skin or gets into your eyes or mouth,

rinse it away immediately and consult a doctor. Clean the battery compartment thoroughly before

installing new batteries.

• Do not use old batteries together with new ones. This may shorten the life of the new batteries or

cause old batteries to leak.

• Do not use different types of batteries (such as alkaline and manganese batteries) together.

Specification of batteries may be different even though they look the same.

• Before inserting new batteries, wipe the compartment clean.

• If the remote control is without batteries for more than 2 minutes, or if exhausted batteries remain in

the remote control, the contents of the memory may be cleared. In such a case, install new batteries

and set the remote control code.

• Dispose of batteries according to your regional regulations.

• Keep batteries away from children. If a battery is accidentally swallowed, contact your doctor

immediately.

• When not planning to use the remote control for long periods of time, remove the batteries from the

remote control.

• Do not charge or disassemble the supplied batteries.

• The batteries shall not be exposed to excessive heat such as sunshine, fire or like.

Information for Users on Collection and Disposal of Old Equipment and Used Batteries

These symbols on the products, packaging, and/or accompanying documents mean that used

electrical and electronic products and batteries should not be mixed with general household

waste.

For proper treatment, recovery and recycling of old products and used batteries, please take

them to applicable collection points, in accordance with your national legislation and the

Directives 2002/96/EC and 2006/66/EC.

By disposing of these products and batteries correctly, you will help to save valuable

resources and prevent any potential negative effects on human health and the environment

which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products and batteries, please

contact your local municipality, your waste disposal service or the point of sale where you

purchased the items.

[Information on Disposal in other Countries outside the European Union]

These symbols are only valid in the European Union. If you wish to discard these items,

please contact your local authorities or dealer and ask for the correct method of disposal.

Note for the battery symbol (bottom two symbol examples):

This symbol might be used in combination with a chemical symbol. In this case it complies

with the requirement set by the Directive for the chemical involved.

For more detailed information, refer to the Owner’s Manual on the CD-ROM.

Caution: Do not attempt to play this CD-ROM in an audio player.

To view the Owner’s Manual, click on “English” in the screen displayed automatically when you

insert the CD-ROM into your PC, or click on the model name if the screen to select models is

displayed, and then click on “English” in the next screen. Then, follow the onscreen instructions.

If the screen is not displayed automatically, open the “index.html” in the CD-ROM.

The Owner’s Manual contained in the CD-ROM can be downloaded from the following website:

URL : http://download.yamaha.com/

Do not use this unit within 22 cm (9 inches) of persons with a heart pacemaker implant or

defibrillator implant.

4 En

This document explains 5.1-channel system setup, 5.1.2-channel system

setup using the front presence speakers, and unit configuration, followed by

step-by-step instructions. Basic operations, such as playing Blu-ray Discs,

DVDs, and radio content, are also explained.

The unit is equipped with a number of other functions not described in this

booklet. For more information about this product, refer to the Owner’s Manual

included on the supplied CD-ROM. The latest Owner’s Manual can be

downloaded from the following website.

http://download.yamaha.com/

The Owner’s Manual in HTML format can be viewed on your smartphone,

tablet, or PC. Visit the following website.

http://avpro.global.yamaha.com/manual/avr/rxv683/

[For U.S. customers only]

Visit the following website for additional information, FAQ’s, downloads such

as “Owner’s Manual” and product updates.

http://usa.yamaha.com/support/

AV SETUP GUIDE

AV SETUP GUIDE is an app that guides you

through the process of connecting a TV or playback

device, such as a BD/DVD or CD player, and

speakers to the AV receiver. Search “AV SETUP

GUIDE” on the App Store or Google Play for

details.

En 5

1

Preparation

Confirming package contents Preparing cables

The following cables (not supplied) are required to build the system described

in this document.

• Speaker cables (depending on the number of speakers)

• Audio pin cable (x1)

• HDMI cables (x3)

• Network cable (x1) (when connecting to a router via a network cable)

Remote control

Batteries (AAA, R03, UM-4)

(x2)

AM antenna FM antenna

CD-ROM (Owner’s Manual)

Quick Start Guide (this booklet)

YPAO microphone

One of the above is supplied

depending on the region of purchase.

6 En

2

Connecting speakers/subwoofer

When connecting 6-ohm speakers

(U.S.A. and Canada models only)

Set the unit’s speaker impedance to “6 Ω MIN”. For details, see “Setting the

speaker impedance” in the Owner’s Manual.

Precautions for connecting speaker cables

• Be sure that the unit and subwoofer are turned off.

• Prepare speaker cables in a place away from the unit, to avoid accidentally

dropping wire strands into the unit's interior which could result in a short

circuit or malfunction of the unit.

• Improper connection of speaker cables could cause a short circuit resulting

in damage to, or malfunctioning of, the unit or speakers.

– Carefully remove approximately 10 mm

(3/8") of insulation from the speaker-

connection ends of the cables, and twist

the bare wires of each speaker cable

together firmly.

– Do not allow the bare wires of separate speaker

cables to come into contact with one another.

– Do not allow speaker cable bare wires to come into

contact with metal parts on the unit (rear panel and

screws).

If “Check SP Wires” is shown on the front display when the unit is turned on,

turn off the unit and be sure that speaker cables have not caused a short

circuit.

Positioning speakers

Use the diagram as a reference for positioning speakers.

1 Front speaker (L)

2 Front speaker (R)

3 Center speaker

4 Surround speaker (L)

5 Surround speaker (R)

E Front presence speaker (L)*

R Front presence speaker (R)*

9 Subwoofer

* For 5.1.2-channel system

5

4

21

3

9

ER

**

10° to 30° 10° to 30°

10 mm

(3/8")

En 7

SURROUND

CENTER

CLASS 2 WIRING

FRONT

SINGLE

SURROUND BACK

/ZONE2/BI-AMP

SPEAKERS

SUBWOOFER

PRE

OUT

F.PRESENCE

EXTRA SP1

EXTRA SP

2

1

2

CÂBLAGE CLASSE 2

/ZONE2

2

34

1

9

Subwoofer

2

Front speaker (R)

10 mm

(3/8")

1

Front speaker (L)

3

Center speaker

Surround speaker (R)

5

Surround speaker (L)

4

Use a subwoofer equipped

with built-in amplifier.

Audio pin cable

R

Front presence speaker (R)

E

Front presence speaker (L)

For 5.1.2-channel system

8 En

3

Connecting external devices

HDMI

HDMI HDMI

(

1

BD

/DVD

)

HDMI

(

HDCP2.2

)

54321

1

HDMI

(

HDCP2.2

)

ARC

HDMI

OUT

HDMI HDMI HDMI

HDMI

TV BD/DVD player Satellite/cable set top box

HDMI input

HDMI output HDMI output

En 9

4

Connecting the FM/AM antennas

FM antenna (supplied)

AM antenna (supplied)

Hold down Insert Release

Assembling the AM antenna

Place the AM

antenna on a flat

surface.

Fix the end of the

FM antenna to a

wall.

10 En

5

Preparing a network connection

Prepare a wired or wireless network connection in accordance with your network environment.

Note

The wireless antenna must be raised if the unit will be connected to a Bluetooth device.

NETWORK

(3 NET)

LAN

Raise the wireless

antenna so that it is

standing up straight.

(Procedures for

connecting the unit to a

wireless router are

described in step

7

.)

Notice

Do not apply excessive force

on the antenna. Doing so

may damage it.

Wireless network connection

Internet

Network cable

Router Modem

Wired network connection

En 11

6

Connecting the power cable to an AC wall outlet,

and turning on the unit

1 Plug the power cable into an

AC wall outlet.

2 Press z (receiver power) to

turn on the unit.

3 Turn on the TV and switch the

TV input to display video from

the unit (HDMI OUT jack).

The Network Setup screen shown below will be

displayed on the TV when the unit is turned on for

the first time after purchase. It may take several

tens of seconds for the screen to be displayed

(WAC: Wireless Accessory Configuration).

See “Sharing the iOS device setting” under

“Connecting the unit to a wireless network” in the

Owner’s Manual when using this function to

connect the unit to a network.

This document explains wireless connection

using methods other than this function. Follow

the procedure described under “Connecting the

unit to a network” on the next page.

Note

This screen will not be displayed if the unit is connected

to a router via its NETWORK jack (wired connection).

Before connecting the power cable

(Taiwan, Brazil and General models only)

Set the switch position of VOLTAGE

SELECTOR according to your local voltage.

Voltages are AC 110–120/220–240 V,

50/60 Hz.

220V

-

240V

110V

-

120V

VOLTAGE SELECTOR

To an AC wall

outlet

VOLTAGE SELECTOR

(Taiwan, Brazil and General models only)

HDMIHDMI

AUDIOAUDIO

AV

PHONO

NET

USB

BLUETOOTH

TUNER

2

15

4

321

V-AUX

5

4321

HDMI OUTPART Y

MAIN

ZONE 2

H

DMI

A

UDI

O

AV

PH

O

N

O

NET

USB

B

L

U

ET

OO

T

H

TUNER

2

1

5

4

3

2

1

V

-A

UX

5

4

3

2

1

HDMI OUT

PART Y

MAIN

ZONE 2

z

12 En

7

Connecting the unit to a network

Connecting the unit to a wireless network

• The unit can be connected to a wireless network using the MusicCast

CONTROLLER app* installed on your smartphone or other mobile device.

Follow procedure

A .

• If a mobile device will not be used, follow procedure

B to connect the unit

to a wireless router (access point) that supports WPS. Refer to the Owner’s

Manual for details on other wireless connection methods.

Connecting the unit to a router via a network cable

• Follow procedure

A to use the MusicCast CONTROLLER app* installed on

your smartphone or other mobile device to connect to the MusicCast

network to play music over a network.

• If a mobile device will not be used, skip this step and proceed to step

8

.

* MusicCast CONTROLLER, an app for mobile devices, can be used to

easily configure network settings for not only this unit, but also for other

MusicCast-enabled devices. This app allows you to listen to music stored

on your smartphone or other mobile device, or on servers, and to listen to

Internet radio stations. It also allows you to play this rich variety of music

content on all devices in the MusicCast network at the same time.

Visit the following website for details.

http://www.yamaha.com/musiccast/

A Connecting with the MusicCast

CONTROLLER app

Connect the unit to a network and register it as a MusicCast-enabled device.

Note

• Confirm that your mobile device is connected to your home router before beginning.

• You will need the router’s SSID and security key to connect the unit to a wireless

network.

• The MusicCast CONTROLLER app screens in this section show the English

interface. The screen appearance may vary depending on the app version.

1 Install the MusicCast CONTROLLER app on

your mobile device, and open the app.

Search for “MusicCast CONTROLLER” on the App Store or Google Play.

2 Tap “Setup”.

En 13

3 Confirm that the unit is turned on, and tap “Next”.

4 Press and hold the CONNECT button on the front

panel of the unit for 5 seconds, as instructed by

the app.

5 Follow the app’s on-screen instructions to

configure network settings.

When a connection has been established, “Completed” will be displayed

in the front display of the unit.

Network connection with the MusicCast CONTROLLER app is now complete,

and the unit has been registered as a MusicCast-enabled device.

B Using WPS push-button

configuration

Wireless connection can be configured with one push of the WPS button on

the wireless router (access point).

1 Press and hold INFO (WPS) on the unit’s front

panel for more than 3 seconds.

“Press WPS button on Access Point” will be displayed in the front display.

2 Push the WPS button on the wireless router.

When a connection has been established, “Completed” will be displayed

in the front display.

Note

If “Not connected” is displayed, repeat the process from step 1 or try another

connection method.

234

SCENE

(CONNECT)

STRAIGHT

HDMI

AUDIO

IN

VIDEO

VOLUME

AUX

PROGRAM

INFO (WPS)ZONE 2

ZONE CONTROL

MEMORY

PRESET

123

SCENE

MAIN ZONE

YPAO MIC

14 En

8

Optimizing the speaker settings automatically

(YPAO)

The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s),

and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room.

12

3

9

54

ER

ENTER

RETURN

POP-UP/MENUTOP MENU

4321

8765

9 0

MUTE

OPTION

ON

SCREEN

DISPLAY

MODE

MOVIE MUSIC

INFO

SLEEP

ENT

PRESETTUNING

VOLUME

PROGRAM

BAND

SUR. DECODE

STRAIGHT

ENHANCER PURE DIRECT

MEMORY

4

32

1

RETURN

P

O

P-UP

/

MEN

U

T

O

P MEN

U

4

3

2

1

8

7

6

5

9

0

MUTE

O

PTIO

N

ON

SCREE

N

DISPLA

Y

M

O

D

E

MO

VIE M

US

I

C

I

NF

O

S

LEEP

ENT

P

RE

S

ET

T

UNIN

G

V

O

L

U

ME

PR

OG

RA

M

B

AND

SU

R. DE

CO

DE

S

TRAI

G

HT

ENHAN

C

E

R

P

U

RE DIRE

C

T

M

EM

O

R

Y

4

3

2

1

ENTER

Note the following regarding

YPAO measurement

• Test tones are output at high

volume and may surprise or

frighten small children.

• Test tone volume cannot be

adjusted.

• Keep the room as quiet as

possible.

• Stay in a corner of the room

behind the listening position

so that you do not become an

obstacle between speakers

and the YPAO microphone.

• Do not connect headphones.

Ear height

Listening position

YPAO microphone

Cursor keys

En 15

1 Turn on the subwoofer and set the volume to half.

If the crossover frequency is adjustable, set it to maximum.

2 Place the YPAO microphone at your listening

position and connect it to the YPAO MIC jack on

the front panel.

The screen below appears on the TV.

Note

Place the YPAO microphone at your listening position (same height as your ears).

We recommend the use of a tripod as a microphone stand. You can use the tripod

screws to stabilize the microphone.

3 Use the cursor keys to select “Measure” and press

ENTER.

The measurement will start in 10 seconds.

It takes about 3 minutes to measure.

The screen below appears on the TV when the measurement finishes.

Note

If an error message (such as E-1) or warning message (such as W-2) appears,

see “Error messages” or “Warning messages” under “Optimizing the speaker

settings automatically (YPAO)” in the Owner’s Manual.

4 Use the cursor keys to select “Save/Cancel” and

press ENTER.

5 Use the cursor keys to select “SAVE” and press

ENTER.

6 Use the cursor keys to select “YES” to enable

YPAO Volume and press ENTER.

7 Disconnect the YPAO microphone from the unit.

This completes optimization of the speaker settings.

VOLUME

CROSSOVER/

HIGH CUT

MIN MAX

16 En

Basic operations

This section describes basic operations such as playing Blu-ray Discs and DVDs, and tuning into radio stations. Most operations can be performed using the

remote control.

Operating the remote control

HDMIHDMI

AUDIOAUDIO

AV

POP-UP/MENUTOP MENU

PHONO

NET

USB

BLUETOOTH

TUNER

2

15

4

321

V-AUX

5

4321

SCENE

MUTE

VOLUME

PROGRAM

HDMI OUTPART Y

MAIN

ZONE 2

4

32

1

POP-UP/MENU

PROGRAM

HDMI OUT

PART Y

MAIN

ZONE 2

MODE

MOVIE MUSIC

INFO

SLEEP

PRESETTUNING

SUR. DECODE

STRAIGHT

ENHANCER PURE DIRECT

MODE

INFO

SLEEP

TUNING

The unit is equipped with a variety of sound

programs and surround decoders that allow you to

enjoy playback sources in your favorite sound

mode.

STRAIGHT: Input sources will be played without any

sound field effects.

PURE DIRECT: Input sources will be played using only

those functions absolutely vital to playback to minimize

noise generated by electronic circuitry. Functions such

as the front panel display will be temporarily disabled to

achieve Hi-Fi sound quality.

ENHANCER: Compressed music stored on a

Bluetooth device or USB storage device will be played

with additional depth and breadth.

MOVIE, MUSIC, SUR. DECODE: Sound programs

suitable for movies and music can be selected using

MOVIE or MUSIC, and unprocessed multichannel

playback from 2-channel sources is enabled using

SUR. DECODE.

Unit input sources and settings that have been

assigned to SCENE keys can be selected with just

one touch (SCENE function).

The unit turns on automatically when it is in standby

mode. By default, the following settings assigned to

each SCENE key.

SCENE key

Input HDMI1 AUDIO1

NET

RADIO

TUNER

Sound program

MOVIE

(Sci-Fi)

STRAIGHT

MUSIC

(7ch

Stereo)

MUSIC

(7ch

Stereo)

Compressed

Music Enhancer

Off On On On

1

2

3

4

Mute the audio output

Adjust the volume level

Turn on/off (standby) the unit

Select an input source

En 17

Playing a BD/DVD

We recommend playing back multichannel audio (5.1-channel or more) to feel surround sound produced by the unit.

1 Turn on the BD/DVD player.

2 Press HDMI 1.

The name of the connected device such as “BD

player” may be displayed.

3 Start playback on the BD/DVD

player.

4 Press STRAIGHT to select

“STRAIGHT”.

Note

When “STRAIGHT” (straight decode) is enabled, each

speaker produces each channel audio signal directly

(without sound field processing).

5 Press VOLUME to adjust the

volume.

Note

When sound is not heard, or no sound is output from a specific

speaker, see “Troubleshooting” in the Owner’s Manual.

MUTE

ENHANCER

STEREO

TUNED

SLEEP

ECO

CHARGE

ADAPTIVE DRC

VIRTUAL

BD Player

VOL.

OUT

Input source Device name

HDMIHDMI

AUDIOAUDIO

AV

ENTER

RETURN

POP-UP/MENUTOP MENU

PHONO

NET

USB

BLUETOOTH

TUNER

2

15

4

321

V-AUX

5

4321

8765

9 0

SCENE

MUTE

OPTION

ON

SCREEN

DISPLAY

MODE

MOVIE MUSIC

INFO

SLEEP

ENT

PRESETTUNING

VOLUME

PROGRAM

HDMI OUTPART Y

BAND

SUR. DECODE

STRAIGHT

ENHANCER PURE DIRECT

MEMORY

MAIN

ZONE 2

4

32

1

H

DMI

AUDIO

AV

E

NTER

RETURN

P

O

P-UP

/

MENU

TO

P MENU

PH

O

N

O

NET

USB

B

L

U

ET

OO

T

H

TU

NER

2

1

5

4

3

2

1

V-A

U

X

5

4

3

2

4

3

2

1

8

7

6

5

9

0

SC

EN

E

MUTE

O

PTION

ON

S

CREE

N

D

ISPLAY

MO

DE

MO

VIE

MUS

I

C

I

NF

O

S

LEEP

ENT

PRE

S

ETTUNIN

G

P

R

OG

RA

M

H

DMI

O

U

T

PART Y

B

AN

D

SU

R. DE

CO

DE

ENHAN

C

E

R

P

U

RE DIRE

C

T

M

EM

O

RY

MAIN

ZONE 2

4

3

2

1

VOLUME

( / )

HDMI 1

STRAIGHT

18 En

Listening to FM/AM radio

1 Press TUNER to select “TUNER” as

the input source.

2 Press BAND to select FM or AM.

3 Use the following keys to set a

frequency.

TUNING: Increase/decrease the frequency. Hold

down the key for about a second to search stations

automatically.

Numeric keys: Enter a frequency directly. For

example, to select 98.50 MHz, press “9”, “8”, “5”

and “0” (or ENT).

“TUNED” lights up when the unit is receiving an FM/

AM radio station signal.

“STEREO” lights up when the unit is receiving a

stereo FM radio signal.

Listening to Internet radio

1 Press NET repeatedly to select

“NET RADIO” as the input source.

The browse screen is displayed on the TV.

2 Use the cursor keys to select an

item and press ENTER.

When an Internet radio station is selected, playback

starts and the playback screen is displayed.

Note

Internet radio stations can also be selected using the

MusicCast CONTROLLER app installed on your mobile device.

Setting the frequency steps (Asia, Taiwan, Brazil

and General models only)

At the factory, the frequency step setting is set to 50 kHz

for FM and 9 kHz for AM.

Depending on your country or region, set the frequency

steps to 100 kHz for FM and 10 kHz for AM.

1 Set the unit to standby mode.

2 Hold down STRAIGHT on the front panel and press

MAIN ZONE z.

3 Press PROGRAM on the front panel repeatedly to

select “TU”.

4 Press STRAIGHT on the front panel to select

“FM100/AM10”.

5 Press MAIN ZONE z to set the unit to standby mode

and turn it on again.

ENHANCER

LINK

ECO

MASTER

OUT

2

-

R

es

Hi

YPAO

VOL.

A

-

DRC

SLEEP

PARTY

ZONE

A2B3

FPR

SBL SB SBR

FPL

MUTE VIRTUAL

VOL.

SL

SW

SR

STEREO

TUNED

FM 98.50MHz

ENHANCER

LINK

ECO

MASTER

OUT

2

-

R

es

Hi

YPAO

VOL.

A

-

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

A2B3

VOL.

FPR

SL

SW

SR

SBL SB SBR

FPL

MUTE VIRTUAL

TU••••FM50/AM9

The MusicCast CONTROLLER app installed on

your mobile device can be used to play music from

streaming services. Refer to documentation

included on the supplied CD-ROM for more

information.

HDMIHDMI

AUDIOAUDIO

AV

ENTER

RETURN

POP-UP/MENUTOP MENU

PHONO

NET

USB

BLUETOOTH

TUNER

2

15

4

321

V-AUX

5

4321

8765

9 0

SCENE

MUTE

OPTION

ON

SCREEN

DISPLAY

MODE

MOVIE MUSIC

INFO

SLEEP

ENT

PRESETTUNING

VOLUME

PROGRAM

HDMI OUTPART Y

BAND

SUR. DECODE

STRAIGHT

ENHANCER PURE DIRECT

MEMORY

MAIN

ZONE 2

4

32

1

H

DMI

AUDIO

AV

RETURN

P

O

P-UP

/

MENU

TO

P MENU

PH

O

N

O

USB

B

L

U

ET

OO

T

H

2

1

5

4

3

2

1

V-A

U

X

5

4

3

2

1

SC

EN

E

MUTE

O

PTION

ON

S

CREE

N

D

ISPLAY

MO

DE

MO

VIE

MUS

I

C

I

NF

O

S

LEEP

PRE

S

ET

VO

L

U

ME

P

R

OG

RA

M

H

DMI

O

U

T

PART Y

SUR. DECODE

S

TRAI

G

HT

ENHAN

C

E

R

P

U

RE DIRE

C

T

M

EM

O

RY

MAIN

ZONE 2

4

3

2

1

TUNER

NET

BAND

TUNING

ENTER

Cursor

keys

Numeric

keys

ENT

En 19

Playing music stored on a

Bluetooth

®

device

1 Press BLUETOOTH to select

“Bluetooth” as the input source.

2 Select the unit (network name of the

unit) from the available device list

on the Bluetooth device.

If the pass key is required, enter the number “0000”.

When the connection is established, the

indicator will glow in the front display.

3 Select a song and start playback on

the Bluetooth device.

Note

Audio playing on the unit can be transmitted to Bluetooth

wireless speakers or headphones (except when Bluetooth is

selected as the unit’s input source). See “Enjoying audio using

Bluetooth speakers/headphones” in the Owner’s Manual for

more information.

Playing music stored on a

USB flash drive

1 Connect the USB flash drive to the

USB jack.

Note

Connect the USB flash drive directly to the USB jack. Do

not use an extension cable.

2 Press USB to select “USB” as the

input source.

The browse screen is displayed on the TV.

3 Use the cursor keys to select an

item and press ENTER.

When a song is selected, playback starts and the

playback screen is displayed.

CONTROL

PHONES

SILENT

CINEMA

5V 1A

USB

TONE

INPUT

USB flash drive

HDMIHDMI

AUDIOAUDIO

AV

ENTER

RETURN

POP-UP/MENUTOP MENU

PHONO

NET

USB

BLUETOOTH

TUNER

2

15

4

321

V-AUX

5

4321

8765

9 0

SCENE

MUTE

OPTION

ON

SCREEN

DISPLAY

MODE

MOVIE MUSIC

INFO

SLEEP

ENT

PRESETTUNING

VOLUME

PROGRAM

HDMI OUTPART Y

BAND

SUR. DECODE

STRAIGHT

ENHANCER PURE DIRECT

MEMORY

MAIN

ZONE 2

4

32

1

H

DMI

AUDIO

AV

RETURN

P

O

P-UP

/

MENU

TO

P MENU

PH

O

N

O

NET

TU

NER

2

1

5

4

3

2

1

V-A

U

X

5

4

3

2

1

4

3

2

1

8

7

6

5

9

0

SC

EN

E

MUTE

O

PTION

ON

S

CREE

N

D

ISPLAY

MO

DE

MO

VIE

MUS

I

C

I

NF

O

S

LEEP

ENT

PRE

S

ETTUNIN

G

VO

L

U

ME

P

R

OG

RA

M

H

DMI

O

U

T

PART Y

B

AN

D

SU

R. DE

CO

DE

S

TRAI

G

HT

ENHAN

C

E

R

P

U

RE DIRE

C

T

M

EM

O

RY

MAIN

ZONE 2

4

3

2

1

USB

BLUETOOTH

ENTER

Cursor

keys

20 Fr

1 Pour utiliser l’appareil au mieux de ses possibilités, lisez attentivement ce mode d’emploi.

Conservez-le soigneusement pour référence.

2 Installez cet ensemble audio dans un endroit bien aéré, frais, sec et propre - veillez à ce qu’il soit à

l’abri de la lumière directe du soleil, des sources de chaleur, des vibrations, des poussières, de

l’humidité et/ou du froid. Pour une ventilation correcte, ménagez l’espace minimum suivant.

Au-dessus : 30 cm, À l’arrière : 20 cm, Sur les côtés : 20 cm

3 Placez l’appareil loin des équipements, moteurs et transformateurs électriques, pour éviter les

ronflements parasites.

4 N’exposez pas l’appareil à des variations brutales de température, ne le placez pas dans un

environnement très humide (par exemple dans une pièce contenant un humidificateur) car cela peut

entraîner la condensation d’humidité à l’intérieur de l’appareil qui elle-même peut être responsable

de décharge électrique, d’incendie, de dommage à l’appareil ou de blessure corporelle.

5 Evitez d’installer l’appareil dans un endroit où des objets peuvent tomber, ainsi que là où l’appareil

pourrait être exposé à des éclaboussures ou des gouttes d’eau. Sur le dessus de l’appareil, ne placez pas:

– d’autres appareils qui peuvent endommager la surface de l’appareil ou provoquer sa décoloration.

– des objets se consumant (par exemple, une bougie) qui peuvent être responsables d’incendie, de

dommage à l’appareil ou de blessure corporelle.

– des récipients contenant des liquides qui peuvent être à l’origine de décharge électrique ou de

dommage à l’appareil.

6 Ne couvrez pas l’appareil d’un journal, d’une nappe, d’un rideau, etc. car cela empêcherait

l’évacuation de la chaleur. Toute augmentation de la température intérieure de l’appareil peut être

responsable d’incendie, de dommage à l’appareil ou de blessure corporelle.

7 Ne branchez pas la fiche du câble d'alimentation de l’appareil sur une prise secteur aussi longtemps

que tous les raccordements n’ont pas été effectués.

8 Ne pas faire fonctionner l’appareil à l’envers. Il risquerait de chauffer et d’être endommagé.

9 N’exercez aucune force excessive sur les commutateurs, les boutons et les cordons.

10 Pour débrancher la fiche du cordon d’alimentation au niveau de la prise secteur, saisissez la fiche et

ne tirez pas sur le cordon.

11 Ne nettoyez pas l’appareil au moyen d’un solvant chimique, ce qui pourrait endommager la finition.

Utilisez un chiffon sec et propre.

12 N’alimentez l’appareil qu’à partir de la tension prescrite. Alimenter l’appareil sous une tension plus

élevée est dangereux et peut être responsable d’incendie, de dommage à l’appareil ou de blessure

corporelle. Yamaha ne saurait être tenue responsable des dommages résultant de l’alimentation de

l’appareil sous une tension autre que celle prescrite.

13 Pour empêcher tout dommage causé par les éclairs, déconnectez le câble d'alimentation et toute

antenne extérieure de la prise murale pendant un orage.

14 Ne tentez pas de modifier ni de réparer l’appareil. Consultez le service Yamaha compétent pour toute

réparation qui serait requise. Le coffret de l’appareil ne doit jamais être ouvert, quelle que soit la raison.

15 Si vous envisagez de ne pas vous servir de l’appareil pendant une longue période (par exemple,

pendant les vacances), débranchez la fiche du câble d'alimentation au niveau de la prise secteur.

16 Veuillez vous reporter à la section « Guide de dépannage » du mode d’emploi sur le CD-ROM

concernant les erreurs de fonctionnement courantes avant d'en conclure que l’appareil est défectueux.

17 Avant de déplacer l’appareil, appuyez sur z pour placer l’appareil en veille puis débranchez la fiche

du câble d'alimentation au niveau de la prise secteur.

18 VOLTAGE SELECTOR (Modèles pour Taïwan, le Brésil et modèle standard uniquement)

Le commutateur VOLTAGE SELECTOR placé sur le panneau arrière de cet appareil doit être

convenablement positionné AVANT de brancher la fiche du cordon d’alimentation secteur.

Les tensions d’alimentation possibles sont:

.........................................................................................................CA 110-120/220-240 V, 50/60 Hz

19 La condensation se forme lorsque la température ambiante change brusquement. En ce cas,

débranchez la fiche du câble d’alimentation et laissez l’appareil reposer.

20 La température de l’appareil peut augmenter en raison d’une utilisation prolongée. En ce cas, coupez

l’alimentation de l’appareil et laissez-le au repos pour qu’il refroidisse.

21 Installez cet appareil à proximité de la prise secteur et à un emplacement où la fiche du câble

d’alimentation est facilement accessible.

22 Une pression excessive du son par les écouteurs et le casque d’écoute peut entraîner la perte de l’ouïe.

Français

Touche z (alimentation)

Mettez l’appareil sous tension ou réglez-le en mode de mise en veille.

Ce produit est conçu pour un usage courant dans les résidences standard. Ne l'utilisez pas pour des

applications nécessitant une haute fiabilité, telles que la gestion des gestes essentiels à la vie, des

soins de santé ou des biens de grande valeur.

ATTENTION : VEUILLEZ LIRE CE QUI SUIT AVANT D’UTILISER L’APPAREIL.

Cet appareil n’est pas déconnecté du secteur tant qu’il reste branché à la prise de courant, même si

l’appareil en soi est éteint par la touche z. Il se trouve alors « en veille ». En mode veille, l’appareil

consomme une très faible quantité de courant.

AVERTISSEMENT

POUR RÉDUIRE LES RISQUES D’INCENDIE OU DE DÉCHARGE ÉLECTRIQUE,

N’EXPOSEZ PAS CET APPAREIL À LA PLUIE OU À L’HUMIDITÉ.

Sivu latautuu...

Yamaha RX-V683 Pikaopas

Yamaha RX-V683 Pikaopas

muilla kielillä

Aiheeseen liittyviä papereita

Muut asiakirjat