Mitel DT690 Quick Reference Manual

Cover Page Graphic

Place the graphic directly on the page, do not care

about putting it in the text flow. Select Graphics >

Properties and make the following settings:

• Width: 15,4 cm (Important!)

• Height: 11,2 cm (May be smaller)

• Top: 5,3 cm (Important!)

• Left: -0,3 cm (Important!)

This text should then be hidden.

DT690 Cordless Phone

for MiVoice MX-ONE

QUICK REFERENCE GUIDE

LZT 103 081 2D 2016-04-27

English ....................................................................................7

Dansk ................................................................................... 19

Deutsch ............................................................................... 31

Español ................................................................................ 43

Español de América Latina ........................................... 55

Français ............................................................................... 67

Italiano ................................................................................ 79

Nederlands ........................................................................91

Norsk ..................................................................................103

Português .........................................................................115

Português do Brasil .......................................................127

Русский .............................................................................139

Suomi .................................................................................151

Svenska .............................................................................163

MX-ONE – DT690

5

FCC Statement

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC rules.

These limits are designed to provide reasonable pro-

tection against harmful interference in a residential

installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this equipment

does cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try

to correct the interference by one or more of the fol-

lowing measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a circuit dif-

ferent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV tech-

nician for help.

--------------------------------------------------------------

Privacy of communications may not be ensured

when using this phone.

This equipment complies with FCC radiation exposure

limits set forth for an uncontrolled environment. This

device complies with FCC SAR limit of 1.6 W/kg. The

highest SAR value measured when used at the ear is

0.104 W/kg. This device must not be colocated or

operating in conjunction with any other antenna or

transmitter.

• This equipment complies with Part 68 of the FCC

rules and the requirements adopted by the ACTA. On

the rear side, underneath the battery of this equip-

ment is a label that contains, among other informa-

tion, a product identifier in the format

US:AAAEQ##TXXXX. If requested, this number

must be provided to the telephone company.

• REN is N/A as this product is intended to be con-

nected behind a FCC Part 68 compliant PBX system.

It is not intended for direct connection to telephone

network.

• If this equipment cause harm to the telephone net-

work, the telephone company will notify you in

advance that temporary discontinuance of service

may be required. But if advance notice isn't practical,

the telephone company will notify the customer as

soon as possible. Also, you will be advised of your

right to file a complaint with the FCC if you believe it

is necessary.

• The telephone company may make changes in its

facilities, equipment, operations or procedures that

could affect the operation of the equipment. If this

happens, the telephone company will provide

advance notice in order for you to make necessary

modifications to maintain uninterrupted service.

• If trouble is experienced with this equipment, for

repair or warranty information, please contact your

Mitel business partner http://www.mitel.com.

This equipment is not intended to be repaired by the

customer (user). If the equipment is causing harm to

the telephone network, the telephone company may

request that you disconnect the equipment until the

problem is resolved.

• Connection to party line service is subject to state

tariffs. Contact the state public utility commission,

public service commission or corporation commis-

sion for information.

• If your home has specially wired alarm equipment

connected to the telephone line, ensure the installa-

tion of this equipment that it does not disable your

alarm equipment. If you have questions about what

will disable alarm equipment, consult your telephone

company or qualified installer.

Electrical Safety Advisory

Electrical surges, typically lightning transients, are

very destructive to customer terminal equipment con-

nected to AC power sources. Customer is thus rec-

ommended to use a surge arrestor for the equipment

that requires AC power.

7

English

Important user information

NOTICE

The information contained in this document is

believed to be accurate in all respects but is not

warranted by Mitel Networks™ Corporation

(MITEL®). Mitel makes no warranty of any kind with

regards to this material, including, but not limited to,

the implied warranties of merchantability and fitness

for a particular purpose. The information is subject

to change without notice and should not be

construed in any way as a commitment by Mitel or

any of its affiliates or subsidiaries. Mitel and its

affiliates and subsidiaries assume no responsibility

for any errors or omissions in this document.

Revisions of this document or new editions of it may

be issued to incorporate such changes.

No part of this document can be reproduced or

transmitted in any form or by any means - electronic

or mechanical - for any purpose without written

permission from Mitel Networks Corporation.

Trademarks

The trademarks, service marks, logos and graphics

(collectively "Trademarks") appearing on Mitel's

Internet sites or in its publications are registered and

unregistered trademarks of Mitel Networks Corpora-

tion (MNC) or its subsidiaries (collectively "Mitel") or

others. Use of the Trademarks is prohibited without

the express consent from Mitel. Please contact our

legal department at [email protected]

for additional

information. For a list of the worldwide Mitel Networks

Corporation registered trademarks, please refer to

the website: http://www.mitel.com/trademarks

.

Safety Instructions

Note: When using your telephone or connected

equipment, the following basic safety precautions

should always be followed to reduce risk of fire,

electrical shock and other personal injury.

Recommendations

• Always keep and handle your products with care

and keep them in a clean and dust-free place.

Proper use and care will prolong the products

life. Use a soft absorbent tissue or cloth to

remove dust, dirt or moisture.

• Always ensure that the phone, battery and

charger are used and operated in the

environment for which they are designed.

• Operate the phone in temperatures between

0°C to +40°C (32°F to 104°F).

• Do not expose your products to

liquid, moisture, humidity, solvents,

strong sunlight, harsh environments

or extreme temperatures, never

above +60°C (+140°F), unless the

product has been specifically

designed and officially approved for such

environments.

• Exposure to heat may cause

batteries to leak, overheat or

explode, resulting in fire, burns or

other injuries.

• Do not put the product in the micro-

wave oven: This may cause damage to either

the oven or the product.

• Do not attempt to disassemble or

alter any part of the phone, the

charger(s) or the battery-pack.

Disassembly or alteration may result

in electrical shock or irreversible

damage to the equip-

ment. Only a qualified service personnel or an

authorized AMitelastra partner should conduct

internal inspections, alterations and repairs.

• Do not expose your product to open flames or lit

tobacco products.

• Do not drop, throw or bend your products.

This may cause malfunction or electric shock.

• Do not paint your product.

• Do not use your product in an area where a

potentially explosive atmosphere exists, unless

the product has been specifically designed and

officially approved for such environments.

• To avoid hearing impairment, accept the call

before holding your product (or portable

handsfree device) to your ear.

8

English

Disposal of the product

• Your product should not be placed in

municipal waste. Please check local

regulations for disposal of electronic

products.

Power supply

• Connect the AC power adapter of the charging

unit only to the designated power sources as

marked on the charger.

• Make sure the AC power supply is positioned so

that it will not be subjected to damage or stress.

• To reduce risk of electrical shock, unplug the

chargers from any power source before

attempting to clean or move it.

• The AC power adapters must not be used

outdoors or in damp areas.

• Never modify the cord or plug. If the plug will not

fit into the outlet, have a proper outlet installed

by a qualified electrician.

• Limit the distance between the mains socket and

the cordless phone when charging for easy

accessibility.

• As an energy saving measure, disconnect the

charger from the main socket after charging.

• When unplugging the mains adapter from the

power outlet, make sure that your hands are dry

and ensure that you hold the solid portion of the

mains adapter.

• Do not pull on cables.

• See the complete User Guide for available

power adapters.

Charging and batteries

• Please read carefully the following

important precautions before the

first time use of the batteries. Make

sure to understand and observe all

cautionary instructions stated, so as

to avoid any possible safety hazards

that are caused by any misuse, misapplication

or damage to batteries.

• Only use batteries, mains adapters or desk and

rack chargers which have been specifically

designed for use with your product.

• Use of power sources not explicitly recommend-

ed may lead to overheating, reduced battery

per-

formance, distortion of the equipment and fire or

other damages.

• The phone is equipped with Lithium Li-polymer/

Li-Ion battery. In a complex infrastructure, the

talk- and standby time may differ, due to the con-

sequence of the increase in signaling.

•The battery must always be completely charged

(minimal 4 hours) before first time use.

• The battery in your product is designed to

withstand many charge cycles.

• Use only the recommended charging

equipment.

• Improper charging can cause heat damage or

even high pressure rupture.

• Observe proper charging polarity.

• Do not solder lead wires directly onto the battery.

• Do not allow water to come into contact with the

battery.

• The battery is replaceable, however it is not the

intention to do this frequently.

• Only charge the battery when placed in the

phone.

• Use only the specified battery-packs for your

product.

• Never heat or dispose of the battery into a fire,

which, or else, may cause leakage, burst or fire.

• Remove the carrying case from the product

while in charger.

• Do not cover the product while being charged.

Do not charge the phone in a closed cabinet or

drawer. The charging of the battery is a chemical

process and causes the battery to become warm

during charging. Make sure the environment in

which the phone is charged, is well vented.

• The cordless phone can be charged either when

switched on or off.

• Do not connect the battery's positive and

negative leads altogether in any circumstances.

• Do not strike or drop the battery. It may cause

damage to the battery.

• Do not charge the battery below

+5°C (+41°F). Be sure to charge the

battery between +5°C and +40°C

(+41°F and 104°F). Charging

beyond these conditions may impair

the battery performance and shorten

the life cycle.

• Do not use battery packs from different types,

brands or of different capacities.

• The battery is to be stored in a dry cool place,

with the ambient temperature of approx. +25°C

(+77°F) for best performance.

• The battery continues to discharge a minimal

portion of its power, even if the product is

switched off or the battery is removed.

• Dispose the battery in accordance with all local

regulations, applicable in your country.

9MX-ONE – DT690

English

Warnings

Smoke or fumes

• Stop operating the products and

turn off immediately in case of

smoke or fumes. Unplug the mains

adapter and remove the batteries from the

phone immediately. Continued operation may

result in fire or electrical shock.

LCD

• If the liquid crystal display breaks, avoid injury by

not allowing the liquid crystal to come into

contact with eyes, skin or mouth. Prevent the

liquid crystal from leaking out of the broken

glass.

Preventing malfunction

• Never place the equipment in close proximity

of electric motors, welding equipment or other

devices generating strong (electro) magnetic

fields. Exposure to strong (electro) magnetic

fields may cause malfunction and corrupt the

communica-

tion.

• Moving the equipment rapidly between warm

and cold temperatures may cause condensation

(wa-

ter droplets) to form on its internal and external

surfaces. Water droplets may cause malfunction

of the equipment and corrupt or end

communication or damage the equipment. When

condensation is noticed, stop using the

equipment. Switch off the phone, remove the

battery and unplug the mains adapter from the

power outlet. Wait until the moisture evaporates

from the equipment before putting it in operation

again.

• Avoid accidental drop of the phone. Use the clip,

security clip or carrying case specified for

carrying purposes of the phone.

• Avoid squeezing the phone between furniture

and your body when carrying the phone in your

pocket or attached to clothing.

Notice to European customers:

The CE marking affixed to Mitel products indicates

conformance to the R&TTE directive 99/05/EC

(Radio and Telecommunications Terminal

Equipment Directive). For a copy of the original

signed

Declaration (in full conformance with EN45014),

please contact your Mitel office or Sales partner.

MX-ONE – DT69010

English

11

English

Mitel DT690 Cordless Phone

Quick Reference Guide

Main Display Menu

Note:

Information displayed can vary depending on version and

configuration of the exchange, or whether the phone is used

in a DECT or an IP DECT system. Consult your system

administrator to find out which type of system your phone is

used in.

This Quick Reference Guide includes short

descriptions on how to use the basic features. More

features and technical requirements are available in

the User Guide.

The complete User Guide is available on

www.mitel.com

Read the safety instructions before use!

1 Multifunction button (can be programmed

as a short cut to functions)

2 Speaker volume up key

3 Speaker volume down key

4 Headset connector

5 Left soft key

6 Middle soft key

7 Right soft key

8 Off-hook key

9 Five-way navigation key

10 On-hook and power on or off

11 Voice mail access

12 Key lock and Upper/Lower case

13 Space

14 Mute key

15 Indicator

16 Display

When you press the soft key Menu, the Messaging tab is

marked by default.

1 Connections

2 Calls

3Short cuts

4 My favourites

5 Messaging

6 Settings

7Profiles

8 Contacts

Mitel DT690 Cordless Phone Quick Reference Guide

12

English

Switch On and Off

Switch on: Press and hold (Until

display lights up)

Ye s (confirm)

Switch off: Press and hold

Ye s (confirm)

Free seating

Log on:

*11* Authorization code *

Own extension number

#

Note: Free seating is not supported by IP

DECT.

Log off: #11#

Answer Calls

Answer: Press

Handsfree: Press

Headset: Press the answering button on

the headset.

Call pick-up: Call ringing extension

8

France and New Zealand: Press 4;

Sweden: Press

6

Group call pick-up:

* 8 #

Finland and Sweden: Press *0#;

U.S.A. and Canada: Press

*59#

End call: Press

Reject call: Press

Make Calls

Dial: Dial extension number or

external line and number

Handsfree: Dial number

Common speed

dialing number:

Dial common speed dialing

number

Dial by contact: Press Menu - Contacts - Call

contact, select contact

Or

Press and hold first character of

name, select name

Note: Contacts marked with cannot be

modified.

Search and dial a

contact:

Press Menu - Contacts - Central

phonebook- Search by name (or

Search by number), enter name

(or number) and press Search.

Select contact

Dial by call list: Press select number

Redial last

external number:

***

Finland and Sweden: Press **0

Dial from a

text message:

Press Menu - Messaging -

Inbox Select a text message

and press View - More - Call

no. in text (or Call sender)

Silent Ringing and Mute

Mute ringing

telephone:

Press to suppress the

ringing. (Press to answer.)

Switch ring

signal off: Press and hold

Mute microphone

during call: Press and hold during

call

Make Calls

13

Mitel DT690 Cordless Phone Quick Reference Guide

English

Volume

Adjust speaker

volume during a call:

Press the volume up button on

the side of the phone to

increase.

Press the volume down button

on the side of the phone to

decrease.

Adjust ringing

volume:

Press Menu - Settings - Sound

& Alerts - Volume and adjust

with navigation keys.

Callback

(The busy number calls back when free.)

Order: Press More - Callback

If the function cannot be activated on

your phone by pressing More, press

6 instead.

France, New Zealand and Sweden:

Press

5

Cancel all

callbacks:

#37 #

U.S.A. and Canada: Press #6#

Cancel single

callback:

#37* extension number #

U.S.A. and Canada: Press #6*

Call Waiting

(A call waiting signal is sent to the busy number.)

Order: Press More - Call waiting

(Close menu but keep phone off hook.)

If the function cannot be activated on

your phone by pressing More, press

5 instead.

France and New Zealand: Press

6;

Sweden: Press

4

(Call Waiting signal is indicated during an ongoing

call.)

Answer: Press soft key

R (ongoing call

is put on hold)

Or

Press

Intrusion

(Intrude a busy extension to ask the party to hang

up.)

Activate: Press

4

France, New Zealand and Sweden: Press 8

Bypass

(Bypass Follow-me on a specific extension.)

Activate:

*60* desired number #

U.S.A. and Canada: Press *1*

Park a Call

Inquiry

(The first call is parked automaically.)

Ongoing

conversation:

Press More - New call,

dial number

If the function cannot be activated on

your phone by pressing More, press soft

key R instead and dial number.

Refer back: Press More - Switch

If the function cannot be activated on

your phone by pressing More, press

2 instead.

Sweden: Press

R

On hold

Put on hold: Press

R

Resume a call: (within 30 sec)

Resume a call on

another extension:

Call the extension where call

was put on hold. Press

8

France and New Zealand: Press 4;

Sweden: Press

6

Mitel DT690 Cordless Phone Quick Reference Guide

14

English

Conference

Ongoing

conversation:

Press More - New call,

dial number

At answer, press More -

Conference

Repeat to add more.

If the function cannot be activated on

your phone by pressing More, do the

following: Press soft key

R, dial number,

and press

3

at answer.

U.S.A. and Canada: Press

4

Transfer

Ongoing

conversation:

Press More - New call,

dial number

Before or after answer, press

More - Transfer

If the function cannot be activated on

your phone by pressing More, press

R,

dial number, and press before or

after answer.

Blind transfer: Press More - Transf. to new

dial number

Transfer from

Bluetooth headset

to phone:

Press More - Audio Transfer

Note: Bluetooth is optional, see the User

Guide for more information.

Call Forwarding

Internal Follow-me

Order from your

extension:

*21* New extension

number

#

U.K.: Press *2*

Cancel:

# 21#

U.K.: Press #2#

External Follow-me

Order: *22# External line code and

number

#

U.S.A. and Canada: Press *23#

Cancel:

#22#

U.S.A. and Canada: Press #23#

Personal Number

Order or

change to another

profile from

own extension:

*10*(1-5)#

Search profile digits (1-5), are programmed

by system administrator.

Cancel: #10#

Voice Mail (Optional)

New voice mail

message received:

A new voice mail message is

indicated in the status bar by

the icon and a pop-up

dialog box where you can select

Ye s or No.

Press Ye s to open the mailbox.

A new message is displayed.

Press Call to listen to the voice

mail message, or press Close to

close the mailbox.

Press No to open the mailbox

later.

Enter the mailbox: Press Menu - Messaging -

Inbox

Or

Press and hold

1

Note: Press and hold 1 requires that a

voice mail number has been configured

to the Voice Mail button. Please contact

your system administrator.

Call Forwarding

15

Mitel DT690 Cordless Phone Quick Reference Guide

English

SMS (Optional)

(You can send and receive text messages to and from

other phones in the system.)

New text message:

Read message: Press Yes to read it directly.

Press No to read it later.

Write and send

message:

Press Menu - Messaging - Write

new Message. Write the

message, and press Send.

Enter the number and press

Send.

Contacts

Add contact: Press Menu - Contacts - Add

contact - From call list, select

a contact and press Add.

Or

Press Menu - Contacts - Add

contact - New - Add. Enter

contact details and press OK

after each detail. Press Save.

Edit contact: Press Menu - Contacts - Edit

contact. Select contact and

press Edit, edit the contact and

press OK, then Save.

Delete contact: Press Menu - Contacts - Delete

contact. Select contact and

press Delete, then Ye s to

confirm.

Account Code

Activate: *61* account code #

external number

Norway and Finland: Press *71*

Absence Information

Order: *23* absence code (0-9)

Enter time or date (if requested)

#

U.S.A. and Canada: Press *24*

Cancel:

#23#

U.S.A. and Canada: Press #24#

General Deactivation

Cancel all

features:

# 001 #

U.S.A. and Canada: Press *0#

Display Language

Change display

language:

Press Menu - Settings -

Language and select one of the

languages from the list.

Time and Date

Set time format: Press Menu - Settings - Time &

Date - Time format and select

the desired option.

Set date format: Press Menu - Settings - Time &

Date - Date format and select

the desired option.

Mitel DT690 Cordless Phone Quick Reference Guide

16

English

Program Soft Keys and Hot Keys

Soft keys: Press Menu - Short cuts - Soft

keys.

Choose Left, Middle or Right

and press Select.

Select Name enter the name

and press OK.

Select Function, choose a

function and press Back.

Select Value (only for some

functions).

Select Control question.

Hot keys: Press Menu - Short cuts - Hot

keys.

Select a number from the list.

Select a Function.

Select Control question.

Navigation keys: Press Menu - Short cuts -

Navigation keys.

Select Up, Down, Left or Right

and press Select.

Select Function, choose a

function and press Select and

then Back.

Select Value (only for some

functions).

Select Control question.

Multifunction

button:

Press Menu - Short cuts -

Multifunction button.

Select Long Press or Multi

press.

Select a Function.

Select Control question.

Profiles

Add profile: Press Menu - Profiles - Add

new. Enter profile name and

press Save. Make the desired

settings and press Back to

confirm each setting.

Delete profile: Press Menu - Profiles.

Select the profile to delete and

press More - Delete - Yes.

Favourites

Add favorite: Press Menu - My favourites -

Edit favourites. Select a menu

by pressing Change. Repeat to

add more. Press Back to

confirm.

Bluetooth (Optional)

Enable Bluetooth: Press Menu - Connections.

Select Bluetooth, and then

Enable.

Disable Bluetooth: Press Menu - Connections.

Select Bluetooth, and then

Disable.

Connect Bluetooth

headset:

Press Menu - Connections.

Select Bluetooth, and press

Select. Select Headset and

press Select. Select Add new

and press Select and then OK.

Press Pair, enter the Bluetooth

headset PIN code and press OK

to confirm.

Charging the Battery

To charge the battery, place the phone in a desk

charger or a rack charger.

Note: An orange light indicates that the phone battery is being charged.

The light turns green and is displayed to indicate that the battery is

fully charged.

17

Mitel DT690 Cordless Phone Quick Reference Guide

English

Replacing the Battery

To replace the battery, do the following:

1. Switch off the phone and open the battery

compartment.

2. Remove the battery attached to the lid, and

replace with a new battery.

Accessories

The following accessories are available:

Also available:

• Headset with microphone integrated in cable

• Security string

• Rack charger

• Battery pack rack charger

Carry case

with belt clip

Swivel clip

Headset with

microphone on boom

Standard clips Desk chargerDesk PDM charger

Mitel DT690 Cordless Phone Quick Reference Guide

18

English

19

Dansk

Vigtige brugeroplysninger

BEMÆRK

Oplysningerne i dette dokument anses for at være

nøjagtige i alle henseender, men Mitel Networks™

Corporation (MITEL®) indestår ikke for

oplysningerne. Mitel giver ingen garanti af nogen art

vedrørende dette materiale, herunder, men ikke

begrænset til, underforståede garantier vedrørende

salgbarhed og egnethed til et bestemt formål.

Oplysningerne kan ændres uden varsel, og de bør

ikke på nogen måde kunne fortolkes som en

forpligtelse for Mitel eller nogen af Mitels affilierede

selskaber eller datterselskaber. Mitel og Mitels

affilierede selskaber og datterselskaber påtager sig

intet ansvar for eventuelle fejl eller udeladelser i

dette dokument. Revisioner af dette dokument eller

nye versioner af dokumentet vil muligvis blive

udstedt for at inkorporere sådanne ændringer.

Ingen del af dette dokument må reproduceres eller

overføres i nogen form eller ved hjælp af nogen

metoder - hverken elektroniske eller mekaniske -

med noget formål for øje uden skriftlig tilladelse fra

Mitel Networks Corporation.

Varemærker

De varemærker, servicemærker, logoer og grafik

(samlet "Varemærker"), der vises på MITEL

websteder eller i publikationer, er registrerede og

uregistrerede varemærker tilhørende Mitel Networks

Corporation (MNC) og dets datterselskaber (samlet

"Mitel") eller andre. Det er forbudt at bruge

Varemærkerne uden udtrykkelig godkendelse af

Mitel. Venligst kontakt vores juridiske afdeling på

[email protected]

for yderligere information. En

global liste over registrerede varemærker tilhørende

Mitel Networks Corporation findes på hjemmesiden

http://www.mitel.com/trademarks

.

Alle rettigheder forbeholdes

Sikkerhedsinstruktioner

Bemærk: Ved brug af telefonen eller tilsluttet

udstyr

skal de grundlæggende sikkerhedsforskrifter altid

overholdes for at nedsætte risikoen for brand,

elektrisk

stød og anden personskade.

Anbefalinger

• Sørg altid for at opbevare og håndtere dine

produkter omhyggeligt og opbevare dem et rent

og støvfrit sted. Korrekt anvendelse af produktet

forlænger dets levetid. Anvend et blødt absorbe-

rende materiale til at fjerne støv, snavs eller fugt.

• Sørg for, at telefonen, batteriet og opladeren

anvendes og betjenes i de omgivelser, de er

beregnet til.

• Anvend telefonen i temperaturområder mellem

0 °C til + 40 °C.

• Undlad at udsætte produkterne for

væske, fugt, fugtighed, opløsnings-

midler, strækt sollys, barske miljøer

eller ekstreme temperaturer, aldrig

over + 60 °C, med mindre produktet

er specifikt designet og officielt

godkendt til brug i sådanne miljøer.

• Varmeudsættelse kan få batterierne

til at lække, overopvarme eller

eksplodere, hvilket kan resultere i

brand, forbræn-

dinger eller andre skader.

• Produktet må ikke anbringes i mi-

krobølgeovn: Dette kan forårsage skade på

enten ovn eller produkt.

• Forsøg ikke at adskille eller ændre

dele af telefonen, oplader(e) eller

batteri-

pakken. Adskillelse eller ændring

kan resultere i elektrisk stød eller

uoprettelig skade på udstyret.

Interne

eftersyn, ændringer eller reparationer må kun

udføres af kvalificerede serviceteknikere eller en

autoriseret Mitel-partner.

• Produktet må ikke udsættes for åben ild eller

tændte tobaksprodukter.

• Produkterne må ikke tabes, kastes eller bøjes.

Dette kan forårsage fejl på produktet eller

elektrisk stød.

• Produktet må ikke males.

• Undlad at bruge produktet i områder med en

potentielt eksplosiv atmosfære, med mindre

produktet er specifikt designet og officielt

godkendt til brug i sådanne miljøer.

• Besvar et opkald, før produktet (eller den

bærbar håndfri enhed) holdes op mod øret for at

undgå høreskade.

20

Dansk

Bortskaffelse af produktet

• Produktet må ikke efterlades på

kom-

munale affaldspladser. Vi beder dig

undersøge lokale regler for

bortskaffelse af elektroniske

produkter.

Strømforsyning

• Slut kun opladerens AC-strømadapter til den

udpegede strømkilde som markeret på

opladeren.

• Sørg for, at AC-strømforsyningen er placeret, så

den ikke beskadiges eller udsættes for

belastning.

• For at nedsætte risikoen for overbelastning eller

elektrisk stød skal opladere afbrydes fra alle

strømkilder, før de rengøres eller flyttes.

• AC-strømadaptere må ikke bruges udenfor eller

i fugtige områder.

• Ledningen eller stikket må aldrig modificeres.

Hvis stikket ikke passer i stikkontakten, skal der

instal-

leres en passende stikudgang af en kvalificeret

elektriker.

• Afstanden mellem stikkontakten og den trådløse

telefonen skal begrænses for at sikre bedre

tilgængelighed ved opladning.

• Afbryd opladeren fra strømnettet efter endt

opladning for at spare strøm.

• Når netadapteren afbrydes fra stikket, skal du

sikre dig, at dine hænder er tørre, og at du tager

fat i den faste del af strømadapteren.

• Træk ikke i kablerne.

• Der henvises til den komplette brugervejledning

i forbindelse med oplysninger om tilgængelige

strømadaptere.

Opladning og batterier

• Læs følgende vigtige forskrifter om-

hyggeligt, før batterierne tages i

brug første gang. Sørg for, at du

forstår og overholder alle angivne

sikkerheds-

instruktioner for at undgå eventuelle

sikkerhedsrisici, som skyldes misbrug, forkert

anvendelse eller beskadigelse af batterier.

• Anvend kun batterier, netadaptere eller

opladere, som er specifikt beregnet til brug med

produktet.

• Anvendelse af strømkilder, som ikke udtrykkeligt

anbefales, kan resultere i overophedning,

nedsat batteriydeevne, forvrængning af udstyr

samt brand eller andre skader.

• Telefonen er udstyret med Lithium Li-polymer/

Li-Ion-batteri. I komplekse infrastrukturer kan

tale- og standbytider variere som en konsekvens

af den forøgede signallering.

• Batteriet skal altid være helt opladet (mindst

4 timer), før det tages i brug første gang.

• Batteriet i produktet er beregnet til at kunne

oplades mange gange.

• Anvend kun anbefalet opladningsudstyr.

• Forkert opladning kan forårsage varmeskade

eller endda trykbrud.

• Overhold korrekt opladningspolaritet.

• Undlad at lodde strømledninger direkte på

batteriet.

• Lad ikke vand komme i kontakt med batteriet.

• Batteriet kan udskiftes, men dette skal dog ikke

gøres særligt ofte.

• Oplad kun batteriet, når det er placeret i

telefonen.

• Anvend kun de batteripakker, der er specificeret

for produktet.

• Opvarm aldrig batteriet eller bortskaf det med

brug af ild eller på anden måde, som kan

forårsage lækage, brud eller brand.

• Fjern etuiet fra produktet, når det oplades.

• Tildæk ikke produktet, mens det opvarmes.

Oplad ikke produktet i et lukket skab eller en

skuffe. Opladningen af batteriet er en kemisk

proces, som opvarmer bateriet under opladning.

Sørg for, at de omgivelser, hvor telefonen

oplades, er godt ventilerede.

• Den trådløse telefon kan oplades i både slukket

og tændt tilstand.

• Sæt ikke under nogen omstændigheder

batteriets positive og negative ledninger

sammen.

• Slå ikke på batteriet eller tab det. Dette kan

forårsage skade på batteriet.

• Oplad ikke batteriet under + 5 °C.

Sørg for at oplade batteriet mellem

+ 5 °C og + 40 °C. Opladning under

andre forhold kan forringe batteriets

ydeevne og forkorte levetiden.

• Anvend ikke batteripakker af andre typer,

mærker eller med en anden kapacitet.

• Batteriet skal opbevares på et tørt og køligt sted

med en omgivelsestemperatur på ca. + 25 °C

for at sikre optimal ydeevne.

• Batteriet aflades fortsat en anelse, selvom

produktet er slukket eller batteriet er fjernet.

• Bortskaf batteriet i overensstemmelse med alle

lokale bestemmer, der gælder i dit pågældende

land.

Sivu latautuu ...

Mitel DT690 Quick Reference Manual

Mitel DT690 Quick Reference Manual

muilla kielillä

Liittyvät paperit

Muut asiakirjat