Yamaha MCX-C15 - MusicCAST Network Audio Player Ohjekirja

MCX-C15

Distributed Audio Controller

Unité De Contrôle Audio

G

QUICK MANUAL

MANUEL DE RÉFÉRENCE

KURZANLEITUNG

SNABBREFERENS

MANUALE RAPIDO

MANUAL DE USO RÁPIDO

SNELGIDS

MCX-C15

MENU

VOL

FAVORITES

2341

i

English

1 To assure the finest performance,

please read this manual carefully. Keep

it in a safe place for future reference.

2 Install these units in a well ventilated,

cool, dry, clean place — away from

direct sunlight, heat sources, vibration,

dust, moisture, and/or cold. Allow

ventilation space of at least 10 cm on

the top, bottom, left and right. Also

make sure the rear of these units is not

touching the opposite wall.

3 Locate these units away from other

electrical appliances, motors, or

transformers to avoid humming sounds.

4 Do not expose these units to sudden

temperature changes from cold to hot,

and do not locate these units in an

environment with high humidity (i.e. a

room with a humidifier) to prevent

condensation inside these units, which

may cause an electrical shock, fire,

damage to these units, and/or personal

injury.

5 Avoid installing these units where

foreign objects may fall onto these units

and/or these units may be exposed to

liquid dripping or splashing. On the top

of these units, do NOT place:

– Other components, as they may

cause damage and/or discoloration

on the surface of these units.

– Burning objects (i.e. candles), as they

may cause fire, damage to these

units, and/or personal injury.

– Containers with liquid in them, as

they may fall and liquid may cause

electrical shock to the user and/or

damage to these units.

6 Do not cover these units with a

newspaper, tablecloth, curtain, etc. in

order not to obstruct heat radiation. If

the temperature inside these units rises,

it may cause fire, damage to these units,

and/or personal injury.

7 Do not plug these units into a wall outlet

until all connections are complete.

8 Do not operate these units upside-

down. They may overheat, possibly

causing damage.

9 Do not use force on switches, knobs

and/or cords.

10 When disconnecting the power cord

from the wall outlet, grasp the plug; do

not pull the cord.

11 Do not clean these units with chemical

solvents; this might damage the finish.

Use a clean, dry cloth.

12 Only the voltage specified on these

units must be used. Using these units

with a higher voltage than specified is

dangerous and may cause fire, damage

to these units, and/or personal injury.

YAMAHA will not be held responsible

for any damage resulting from use of

these units with a voltage other than

that specified.

13 To prevent damage by lightning,

disconnect the power cord from the wall

outlet during an electrical storm.

14 Do not attempt to modify or fix these

units. Contact qualified YAMAHA

service personnel when any service is

needed. The cabinet should never be

opened for any reason.

15 When not planning to use these units

for long periods of time (i.e. when going

on vacation), disconnect the AC power

plug from the wall outlet.

16 Be sure to read the

“TROUBLESHOOTING” section in the

MCX-C15 Owner’s Manual or MCX-CA15

Owner’s Manual on common operating

errors before concluding that one or

both of these units are faulty.

17 Before moving these units, press

on the MCX-C15 to place them in the

sleep mode, and disconnect the AC

power plug from the wall outlet.

18 Be sure to use the AC adaptor

(LSE0215C1240) supplied with the

MCX-C15. Using an AC adaptor other

than the one provided may cause fire or

damage to these units.

19 These units are designed for home use

only. Never use these units in a car, etc.

Doing so may cause these units to

malfunction.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

ii

SPECIAL INSTRUCTIONS FOR U.K.

MODEL

For U.K. customers

If the socket outlets in your home are not suitable

for the plug supplied with this appliance, it should

be cut off and an appropriate 3 pin plug fitted. For

details, refer to the instructions above.

Note: The plug severed from the mains lead must

be destroyed, as a plug with a bared flexible cord is

hazardous if engaged in a live socket outlet.

These units are not disconnected from the AC

power source as long as they are connected to the

wall outlet, even if the unit itself is turned off.

This state is called the sleep mode. In this state,

these units are designed to consume a very small

quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE THESE

UNITS TO RAIN OR MOISTURE.

IMPORTANT

Please record the serial number of these units in

the space below.

MODEL:

Serial No.:

MODEL:

Serial No.:

The serial number is located on the rear of each

unit. Retain this Owner’s Manual in a safe place

for future reference.

IMPORTANT

The wires in this mains lead are coloured in

accordance with the following code:

GREEN-and-YELLOW: Earth

BLUE: Neutral

BROWN: Live

As the colours of the wires in the mains lead of

each unit may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows: The wire which is coloured

GREEN-and-YELLOW must be connected to the

terminal in the plug which is marked by the letter

E or the safety earth symbol , or coloured

GREEN or GREEN - and YELLOW. The wire

which is coloured BLUE must be connected to

the terminal which is marked with the letter N or

coloured BLACK. The wire which is coloured

BROWN must be connected to the terminal

which is marked with the letter L or coloured

RED.

For Canadian Customers

To prevent electric shock, match the wide blade

of the plug to the wide slot and fully insert.

This Class B digital apparatus complies with

Canadian ICES-003.

CAUTION

Danger of explosion if battery is incorrectly

replaced. Replace only with the same or

equivalent type.

1

English

INTRODUCTION

LISTENING TO

MUSIC

ADDITIONAL

INFORMATION

FEATURES .............................................2

MusicCAST SYSTEM OVERVIEW.....3

The server ................................................. 4

The client .................................................. 4

The amplifier ............................................ 4

TURNING ON THE POWER ...............5

Using the remote control .......................... 6

Using the front panel controller................ 6

LISTENING TO SONGS STORED

ON THE SERVER ..............................7

Adjusting the volume ............................... 9

Adjusting the tone................................... 10

Switching the time display mode ........... 11

BEYOND THE BASICS.......................12

Frequently used functions....................... 12

Handy functions...................................... 12

Listening to external components........... 12

System options........................................ 13

Display settings ...................................... 13

System settings ....................................... 13

Other ....................................................... 13

QUICK MENU REFERENCE ............14

CONTENTS

INTRODUCTION

LISTENING TO MUSIC

ADDITIONAL INFORMATION

2

The MusicCAST MCX-C15 Distributed Audio Controller (hereafter, “the client”) is designed to work in

conjunction with the MusicCAST MCX-1000 Digital Audio Server (hereafter, “the server”) to allow you to

store and listen to your entire music collection. With multiple clients, you and others can simultaneously

access and enjoy your music collection from up to seven different locations. The client is designed to bring

you the following features:

◆ Instant access to all music data stored on an

MCX-1000 server

◆ Simultaneous playback from multiple locations

(when using multiple clients)

◆ Modern in-wall design with paintable face plate

to match every interior

◆ Easy-to-read LCD (128 x 32 dots)

◆ IR wireless remote control

◆ Repeat, Random, Bookmark and Auto Play

functions

◆ Four assignable FAVORITES buttons for direct

playback of your favorite music

◆ Playback and sleep timers

◆ Output selection mode for volume and tone

settings

◆ AV link functionality for integrated control of

YAMAHA AV r ec eivers

About this manual

• y indicates a tip for your operation.

• This manual explains how to perform basic operations using your MusicCAST system. For a full

explanation of the MCX-1000 Digital Audio Server and MCX-C15 Distributed Audio Controller, please

refer to the MCX-1000 Owner’s Manual and MCX-C15 Owner’s Manual respectively.

• For details regarding client installation and network configuration, refer to the Install Manual provided.

• This manual explains how to use the various functions of the client using the remote control. While many

functions are accessible from the client’s front panel, some functions are only accessible from the remote

control.

• This manual is printed prior to production. Design and specifications are subject to change in part as a result

of improvements, etc. In case of differences between the manual and the product, the product has priority.

■ We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to

get the most out of your equipment by playing it at a safe level. One that lets the sound come

through loud and clear without annoying blaring or distortion – and, most importantly, without

affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable

until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics

Group recommend you to avoid prolonged exposure from excessive volume levels.

FEATURES

This unit must be installed by a qualified technician as indicated in the Install Manual provided. Do not

attempt to install this unit yourself.

MPEG Layer-3 audio coding technology

licensed from Fraunhofer IIS and Thomson

This product contains AVE-TCP from ACCESS

CO.LTD.

3

English

INTRODUCTION

With a variety of network configuration methods possible using a Local Area Network (LAN), the

MusicCAST system allows everyone in the family to store their music collection in one central location for

playback from other locations around your home. Once music data is stored, you can have fun creating

playlists, bookmark songs, and even register your favorite music for instant access at the press of a button.

The advanced MusicCAST system is comprised of a server and its connected clients, and the MCX-CA15

optional amplifier can be connected to provide power to speakers and external components.

y

• You can combine up to seven wired and wireless connections as long as you use no more than five wireless

connections.

• Compared with wireless networks, wired networks can carry data over greater distances and to more clients.

The server supports simultaneous playback for seven clients over a wired network.

• The actual number of CDs the server can store depends on the format in which you choose to store songs.

Typically, the server can store approximately 1,000 CDs on its 80 GB hard disk drive if you choose to store

the songs in MP3 format only, or approximately 100 CDs in PCM format.

• The server can supply different songs to multiple clients simultaneously for up to seven clients via a

combination of wired and wireless connections. Depending on a number of factors, such as the playback

format you are using and the strength of the network signal available, it may be advisable to reduce the

number of clients on which you are listening to playback if you encounter problems with playback.

• To ensure smooth playback, select a low MP3 bitrate when storing songs. See “Set the MusicCAST server

data storage format” in the MCX-1000 Owner’s Manual, page 121.

MusicCAST SYSTEM OVERVIEW

Notes

Client (MCX-A10)

Server (MCX-1000)

Client (MCX-C15)

MusicCAST SYSTEM OVERVIEW

4

The server can store approximately 1,000 music CDs in MP3 format or 100 music CDs in PCM format on its

internal hard disk drive for playback from the server or its connected clients. The server automatically stores

song, artist and album names as well as genre information for each CD during the recording process, allowing

easy access to your music without the need to enter any data manually. Once stored, songs can be selected,

sorted and played in a variety of quick and simple ways. The server can supply different songs to multiple

clients simultaneously, as well as supply songs in linear PCM format to one client at a time.

Clients themselves do not store or record any music data. Instead, they connect to the server to retrieve stored

music. This allows you to install a server in your living room, and clients in your bedroom and children’s

rooms, and listen to music stored on the server from each of these locations. The client also allows you to

select, sort and play songs in a variety of the ways, just like the server.

The MCX-CA15 Distributed Audio Amplifier can work as a stand alone amplifier for integration with your

existing audio system or paired with your client to complete the MusicCAST system. As a companion to your

MCX-C15, the MCX-CA15 functions as a power amplifier and DC power distributor. It provides power to all

connected speakers, and can display your MCX-C15’s on-screen display (OSD) on a TV or monitor

connected to the MCX-C15. The MCX-CA15 is fully controllable from your MCX-C15.

The server

The client

MCX-1000 Digital Audio Server

The amplifier

MCX-C15

MENU

VOL

FAVORI TE S

2341

MCX-A10 Digital Audio Terminal

(wireless or wired type)

MCX-C15 Distributed Audio Controller

(wired type)

MCX-CA15

PREOUT SW OUT

VIDEO OUT

IR/CTRL

STATU S

DC IN 12V

AUX IN

MCX-CA15 Distributed Audio

Amplifier

5

English

LISTENING TO

MUSIC

Before using your client for the first time, you must

upgrade the MusicCAST system and make the

appropriate network settings. For details on network

settings, refer to “BEFORE USING THE

MusicCAST SYSTEM” and “CONFIGURING

THE CLIENT” in the Install Manual provided.

When your client is ready for operation, turn on the

power.

The client has two operation modes:

On The client is connected to a power

source and is in operation mode.

Sleep The client is connected to a power

source and activates only when the

unit is operated or it receives an

infrared signal from the client’s

remote control.

or

Before proceeding, make sure the power to

the MCX-1000 server is turned on.

1 Press on either the remote control

or front panel.

The client turns on and the MusicCAST Startup

screen is displayed.

2 The client attempts to connect to the

server, and the following screen is

displayed.

3 If the client is able to make a

connection, the Top Menu screen

appears and the network connection

icon appears in the top right corner of

the display.

If the client is unable to connect to the server, it

continues displaying the “Connecting...”

message. Press any button on the client to

cancel the connection process, then check that

your client network connection settings are

correct (see the Owner’s Manual on the CD-

ROM, page 55).

If no operation is performed for 30 minutes, the

client automatically switches to sleep mode. Press

SELECT or to reactivate the client.

TURNING ON THE POWER

LIBRARY

VOL

FAVOR IT ES

SELECT

BOOKMARK

MENU INPUT

PLAY

INFO.

GROUP GROUPPLAY

OFF TIMER ON TIMER

PAUSE

123

456

7S

STOP

RANDOM

REPEAT

RECALL

MUTE

1234

MCX-3 WD01440

1

MCX-C15

MENU

VOL

FAVORITES

2341

1

Note

Connecting...

Top Menu

Library

Recall Play

Network

connection icon

TURNING ON THE POWER

6

The remote control transmits a directional infrared

beam. Be sure to aim the remote control directly at

the remote control signal receiver on the front panel

during operation.

■ Handling the remote control

• Do not spill water or other liquids on the remote

control.

• Do not drop the remote control.

• Do not leave or store the remote control in the

following types of conditions:

– high humidity, such as near a bath

– high temperature, such as near a heater or

stove

– extremely low temperatures

– dusty places

• If remote control operation of this unit causes

abnormal operation of any other component,

change the placement of that component.

• Make sure the remote control signal receiver is

not exposed to direct sunlight or strong light.

Such exposure may inhibit the remote control’s

functionality.

Moving the controller in the directions indicated on

the front panel of the client performs the same

action as pressing the equivalent cursor key on the

remote control. For example, pushing the client

controller upwards produces the same result as

pressing u on the remote control. Pushing the

controller directly into the front panel has the same

effect as pressing SELECT on the remote control.

Using the remote control

LIBRARY

VOL

FAVORITES

SELECT

BOOKMARK

MENU INPUT

PLAY

INFO.

GROUP GROUPPLAY

OFF TIMER ON TIMER

PAUSE

123

456

7S

STOP

RANDOM

REPEAT

RECALL

MUTE

1234

MCX-C15

MENU

VOL

FAVOR IT ES

2341

30

Within 7 m (23 ft)

of the remote

control signal

receiver

CAUTIONS

Using the front panel

controller

MCX-C15

MENU

VOL

FAVORITES

2341

Controller

7

English

LISTENING TO

MUSIC

Two kinds of files are available for playback from

your client: MP3 (MPEG-1 Audio Layer 3) and

PCM (Pulse Code Modulation).

MP3 files do not take up a large amount of space,

enabling you to store approximately 1,000 CDs on

the server.

PCM files provide better sound quality during

playback, they require large amounts of space. You

can store approximately 100 CDs in PCM format.

The client displays an “*” (asterisk) next to the

names of songs stored in this format. If the server is

set to distribute PCM files, you can play back PCM

files on one client at a time. For details, see the

MCX-1000 Owner’s Manual, page 125.

■ Playback groups

The client retrieves and plays back music files

stored on the server. You can play back songs

grouped by artist, album or genre, as well as play

back songs at random, from pre-chosen lists or in

playback groups. Playback groups are defined by

your playback selection. For example, selecting an

album from the “Albums” menu for playback sets

albums as the playback group. Further, you can

choose to play back groups repeatedly (see the

Owner’s Manual, page 20), play back songs at

random from within a playback group (see the

Owner’s Manual, page 21), or play back all of the

songs in the currently selected group (see the

Owner’s Manual, page 22).

The steps below describe how to access a song

directly from the “Artists” library, but can also be

used to choose songs from the following libraries:

Artists To search for songs by artist.

Albums To search for songs by album.

Genres To search for songs by genre.

All Songs To display a list of all

registered songs in

alphabetical order.

Playlists To view all registered playlists.

Song Statistics To view statistics on songs that

have been played.

Bookmarks To view bookmarked songs.

External Inputs To select an optical, coaxial or

analog input source connected

to the server or an AV receiver

connected to the server.

1 Press and hold MENU until the Top

Menu screen is displayed.

2 Press u / d to choose “Library” and

press SELECT.

LISTENING TO SONGS STORED ON THE SERVER

LIBRARY

VOL

FAVOR IT ES

SELECT

BOOKMARK

MENU INPUT

PLAY

INFO.

GROUP GROUPPLAY

OFF TIMER ON TIMER

PAUSE

123

456

7S

STOP

RANDOM

REPEAT

RECALL

MUTE

1234

MCX-3 WD01440

2-7

1

4-6

Top Menu

Library

Recall Play

LISTENING TO SONGS STORED ON THE SERVER

8

3 Press u / d to choose “Artists” and

press SELECT.

A list of all artists stored in the server is

displayed in alphabetical order.

4 Press u / d to choose an artist.

Press SELECT to display all of the albums

assigned to the artist.

Press p to begin playback of all songs by the

artist in alphabetical order.

5 Press u / d to choose the name of the

album you want to listen to.

Press SELECT to display all of the songs on the

album.

Press p to begin playback of the entire album.

6 Press u / d to choose a specific song

and press SELECT or p to begin

playback.

7 Press j if you want to return to the List

screen.

y

When playback of the selected song is finished,

playback of the next song stored in the library

begins.

■ To stop playback

Press s .

■ To pause playback

Press e . Press e again to resume playback.

■ To search within a song

To search forward during playback, press f . To

search backward, press w . The client does not

output any sound during these operations. You

cannot search any farther than the beginning or end

of a song using these buttons.

Library

Artists

Albums

Artists

Bon Jovi

Bruce Springsteen

Artists-Albums

Born To Run

Darkness On The Edge O

Artists-Songs

Thunder Road

Tenth Avenue Freeze Ou

00:06

Born To Run / Bruce Spr

Tenth Avenue Freeze O

5

STOP

Remote control Front panel

or

PAU SE

2

Remote control

4

6

and

Remote control

LISTENING TO SONGS STORED ON THE SERVER

9

English

LISTENING TO

MUSIC

■ To skip songs

Playback skips to the next song each time you press

a . To skip to the beginning of the song currently

being played, press b once. To skip to the

beginning of the previous song, press b twice.

You cannot skip through songs when playback is

paused.

■ To skip playback groups

Press + (GROUP) to skip to the next item in the

playback group (see “Playback groups”, page 7).

Press – (GROUP) to skip to the previous item. If

only one item is registered in a playback group,

pressing – (GROUP) / + (GROUP) does not have

any effect.

■ To display song information

Press PLAY INFO. during playback to switch to the

Play Info screen.

Use the following procedure to increase or decrease

the volume level of the output from the client.

Press VOL + or VOL – to increase or

decrease the volume level.

The volume level changes accordingly.

1 3

and

Remote control

GROUP

S

GROUP

7

and

Remote control

PLAY

INFO.

Remote control

Adjusting the volume

LIBRARY

VOL

FAVOR IT ES

SELECT

BOOKMARK

MENU INPUT

PLAY

INFO.

GROUP GROUPPLAY

OFF TIMER ON TIMER

PAUSE

123

456

7S

STOP

RANDOM

REPEAT

RECALL

MUTE

1234

MCX-3 WD01440

MCX-C15

MENU

VOL

FAVORITES

2341

VOL – / VOL +

buttons

or

VOL – /

VOL +

buttons

LISTENING TO SONGS STORED ON THE SERVER

10

You can adjust the nature of the sound output by the

client. You can change these settings to create sound

with strong deep bass, or to emphasize the treble.

1 Press and hold MENU until the Top

Menu screen is displayed.

2 Press u / d to choose “Tone” and press

SELECT.

3 Press u / d to choose “Treble” or

“Bass” and press SELECT.

Treble Adjusts the treble for sound output by

the client.

Bass Adjusts the bass for sound output by

the client.

4 Use i to increase the value of the

setting, and use j to decrease the value.

Press SELECT or MENU to confirm the value

you have set and return to the Tone screen.

Adjusting the tone

LIBRARY

VOL

FAVOR IT ES

SELECT

BOOKMARK

MENU INPUT

PLAY

INFO.

GROUP GROUPPLAY

OFF TIMER ON TIMER

PAUSE

123

456

7S

STOP

RANDOM

REPEAT

RECALL

MUTE

1234

MCX-3 WD01440

2-4

1

Top Menu

Input

Tone

Treble

Bass

0.0dB

Treble

0.0dB

Bass

LISTENING TO SONGS STORED ON THE SERVER

11

English

LISTENING TO

MUSIC

You can change the time display on the Play Info

screen so that it displays either the time elapsed

since playback began for the song currently being

played, or the time remaining until playback of the

song is complete.

1 Press PLAY INFO. to display the Play

Info screen during playback, then press

i .

2 Press u / d to choose “Time” and

press SELECT.

3 Press u / d to choose a time mode.

ELAP Displays the time elapsed since the

beginning of the song.

REM Displays the time remaining until the

end of the song.

4 Press SELECT to confirm.

5 Press j to return to the Play Info screen.

Switching the time display

mode

LIBRARY

VOL

FAVOR IT ES

SELECT

BOOKMARK

MENU INPUT

PLAY

INFO.

GROUP GROUPPLAY

OFF TIMER ON TIMER

PAUSE

123

456

7S

STOP

RANDOM

REPEAT

RECALL

MUTE

1234

MCX-3 WD01440

1-5

1

00:06

Born To Run / Bruce Spr

Tenth Avenue Freeze O

Group

Bookmark

Time

SINGLE

OFF

ELAP

12

In addition to playing songs grouped by artist, album or genre, your client has many other advanced

capabilities, such as random playback and external component control. This section provides a brief summary

of these additional functions and their page references in the Owner’s Manual available on the Owner’s

Manual CD-ROM provided.

■ Repeat playback mode

Use this function for repeated playback of a single

song or all of the songs in a playback group

(page 20).

■ Random playback mode

Use this function for random playback of songs

within the selected playback group (page 21).

■ Group playback mode

Use this function to define the range of songs for

playback when using the normal, Repeat and

Random playback modes (page 22).

■ FAVORITES function

Use this function to instantly access your favorite

music from the following (page 23):

•The server

• External inputs from the server (analog or

digital)

• Tuner presets from a YAMAHA AV receiver

connected to the server

• Audio input signals from the MCX-CA15

• Inputs of an AV-linked YAMAHA AV receiver

■ Song statistics function

Use this function to display statistical data about the

songs and albums stored on the server (page 29).

■ Using playlists

Use this function to access playlists created on the

server for playback (page 30).

■ Recall Play function

Use this function to continue listening to the song

currently being played back from the client or the

server on another client (page 31).

■ Bookmark function

Use this function to store your favorite songs in a

temporary list for easy access (page 33).

■ Using the OFF and ON Timer

functions

You can use the OFF and ON Timer functions to

automatically stop and start playback at the

designated time (pages 36 and 37).

■ Broadcast function

You can use this function to enjoy the same song

from different locations around your home

(page 39).

■ Listening to components

connected to the MCX-CA15

You can use your client to enjoy audio from an

external component, such as a CD player or control

amplifier connected to the AUDIO IN jack on the

MCX-CA15 (page 41).

■ Listening to YAMAHA AV receiver

radio station presets

You can use your client to enjoy radio station presets

on a YAMAHA AV receiver connected to the server

(page 42).

■ Using YAMAHA AV link technology

You can use this technology to control YAMAHA

AV receivers from your client (page 43).

■ Listening to components

connected to the server

You can use your client to enjoy audio from an

external component connected to the server

(page 46).

BEYOND THE BASICS

Frequently used functions

Handy functions

Listening to external

components

BEYOND THE BASICS

13

English

ADDITIONAL

INFORMATION

■ Auto Play function

Use this function to automatically resume playback

of the last song the client played before it was

placed in sleep mode (page 47).

■ Auto Level Control function

Use this function to automatically reduce or increase

the base volume level of each song to a theoretical

average during playback (page 47).

■ Selecting the output

Use this function to select the output control method

of the client (page 48).

■ Sleep mode

If you will not be using your client for an extended

period, you can place it in sleep mode (page 49).

■ Adjusting the display contrast

Depending on the location of your client, you may

want to alter the contrast of the display for easier

viewing (page 50).

■ Screen Saver function

The client features an on-screen display Screen

Saver function (page 51).

■ Checking system information

You can check the system information for your

client, such as the firmware version currently being

used (page 52).

■ Troubleshooting

If you are having difficulty with your client, refer to

the “TROUBLESHOOTING” section (page 56).

■ Glossary

If you are unfamiliar with the terminology relating

to MusicCAST, refer to the “GLOSSARY” section

(page 60).

System options

Display settings

System settings

Other

14

The following chart is a convenient reference guide for finding menus and their lists of parameters when you

want to perform an operation on the client in a hurry.

*

Default settings for the client are underlined.

QUICK MENU REFERENCE

OFF Timer

ON Timer

Auto Play

Auto Level Control

AUDIO OUT

Amplifier

Contrast

Network

System

Artists

Albums

All Songs

Genres

Playlists

Bookmarks

External Inputs

Song Statistics

Library

Recall Play

Edit

Bookmark

Setup

Input

Tone

Server

Client 1

Client 3

Client 2

Client 4

Client 6

Client 7

Client 5

Copy to Playlist

Clear All

Server

AUDIO IN

Auto

Treble

Bass

OFF

30min

60min

90min

120min

OFF/ON

Save

Cancel

OFF

ON

OFF

ON

Variable

Fixed

Status

Auto Configuration

Manual Setup

Information

System Update

System Reset

Screen Saver

OFF

ON

Favorites

Clear FAV1

Clear FAV2

Clear FAV3

Clear FAV4

Clear All

MCX-IB15

MCX-CA15

RX-V396RDS type

1

etc.

(page 7)

(Owner’s Manual, p30)

(Owner’s Manual, p29)

(Owner’s Manual, p33)

(Owner’s Manual, p46)

(Owner’s Manual, p34)

(Owner’s Manual, p35)

(Owner’s Manual, p31)

(Owner’s Manual, p41)

(page 10)

(Owner’s Manual, p36)

(Owner’s Manual, p37)

(Owner’s Manual, p47)

(Owner’s Manual, p48)

(Owner’s Manual, p43)

(Owner’s Manual, p50)

(Owner’s Manual, p55)

(Owner’s Manual,

p52 and p53)

(Owner’s Manual, p51)

(Owner’s Manual, p28)

(Install Manual, p24)

(Install Manual, p25)

i

Français

1

Pour profiter au mieux de votre acquisition,

lisez attentivement ce mode d’emploi.

Conservez-le soigneusement pour référence.

2

Installez les appareils dans un endroit bien aéré,

frais, sec et propre, loin de la lumière directe du

soleil, des sources de chaleur, des vibrations, de

la poussière, de l’humidité. Ménagez un espace

d’au moins 10 cm au-dessus, au-dessous, à droite

et à gauche. Veillez également à ce que le panneau

arrière des appareils ne touche pas le mur.

3

Placez les appareils loin des équipements,

moteurs et transformateurs électriques,

pour éviter les ronflements parasites.

4

N’exposez pas les appareils à des variations

brutales de température, ne les placez pas dans un

environnement très humide (par exemple dans une

pièce contenant un humidificateur) car cela peut

entraîner la condensation d’humidité à l’intérieur

des appareils qui elle-même peut être responsable

de secousse électrique, d’incendie, de dommage à

l’appareil ou de blessure corporelle.

5

Évitez d’installer ces appareils dans un

endroit où ils peuvent être exposés à la chute

d’objet ou aux éclaboussures de liquides. Sur

le dessus de ces appareils, NE PLACEZ PAS:

– Un autre appareil car cela peut

entraîner une décoloration ou un

endommagement de leur surface.

–

Un objet allumé (par exemple, une

bougie) car cela peut provoquer un

incendie, endommager les appareils ou

entraîner des blessures corporelles.

–

Un récipient contenant un liquide car il peut se

renverser, ce qui pourrait vous exposer à une

secousse électrique et endommager les appareils.

6

Afin de ne pas empêcher l’évacuation de la

chaleur, ne recouvrez pas ces appareils d’un

journal, d’une nappe, d’un rideau, etc. Si la

température à l’intérieur d’un appareil devient

excessive, il peut en résulter un incendie, un

endommagement ou une blessure corporelle.

7

Ne branchez pas la fiche du cordon d’alimentation

sur une prise secteur aussi longtemps que tous

les raccordements ne sont pas terminés.

8

Ne faites pas fonctionner ces appareils à

l’envers. Leur température peut s’élever

anormalement et provoquer un dommage.

9

N’exercez aucune force excessive sur les

commutateurs, les boutons et les cordons.

10

Pour débrancher la fiche du cordon

d’alimentation au niveau de la prise secteur,

saisissez la fiche et ne tirez pas sur le cordon.

11

Ne nettoyez pas les appareils au moyen d’un

solvant chimique, ce qui pourrait endommager

leur finition. Utilisez un chiffon sec et propre.

12

N’alimentez les appareils qu’à partir de la

tension prescrite. Alimenter les appareils sous

une tension plus élevée est dangereux et peut

être la cause d’incendie, de dommage à

l’appareil ou de blessure corporelle. YAMAHA ne

saurait être tenue responsable des dommages

résultant de l’alimentation de l’appareil sous une

tension autre que celle prescrite.

13

Pour empêcher tout dommage causé par les

éclairs, débranchez le cordon d’alimentation

au niveau de la prise murale pendant un orage.

14

Ne tentez pas de modifier ni de réparer les appareils.

Consultez le service YAMAHA compétent pour toute

réparation qui serait requise. Le coffret ne doit

jamais être ouvert pour quelque raison que ce soit.

15

Lorsque vous envisagez de ne pas utiliser

ces appareils pendant une longue période

(par exemple, pendant vos vacances),

débranchez la fiche du cordon

d’alimentation au niveau de la prise secteur.

16

Lisez attentivement la section “GUIDE DE

DÉPANNAGE” du mode d’emploi du MCX-C15

ou du MCX-CA15 avant de conclure que l’un

ou l’autre de ces appareils est défectueux.

17

Avant de déplacer un appareil, appuyez sur

, sur le MCX-C15, pour les placer en

veille puis débranchez la fiche du cordon

d’alimentation au niveau de la prise secteur.

18

Veillez à utiliser l’adaptateur secteur

(LSE0215C1240) fourni avec le MCX-C15.

L’utilisation d’un adaptateur secteur

autre que celui fourni peut provoquer un

incendie ou endommager ces appareils.

19

Ces appareils ont été conçus pour un

usage strictement domestique. N’utilisez

pas ces appareils dans une voiture, etc.

faute de quoi ils pourraient présenter

des anomalies de fonctionnement.

ATTENTION: VEUILLEZ LIRE CE QUI SUIT AVANT

D’UTILISER L’APPAREIL.

ATTENTION: VEUILLEZ LIRE CE QUI SUIT AVANT D’UTILISER L’APPAREIL.

ii

Ces appareil ne sont pas isolés du secteur aussi

longtemps qu’ils demeurent reliés à une prise

secteur, y compris lorsqu’ils ne sont pas en

service. Ils se trouvent alors “en veille”. En veille,

ces appareils consomment une très faible quantité

d’électricité.

AVERTISSEMENT

POUR RÉDUIRE LES RISQUES D’INCENDIE

OU DE SECOUSSE ÉLECTRIQUE,

N’EXPOSEZ PAS CES APPAREILS À LA

PLUIE OU À L’HUMIDITÉ.

Pour les consommateurs Canadiens

Pour éviter toute secousse électrique, présentez la

fiche du cordon d’alimentation de manière que la

lame large soit en regard de la fente large et

introduisez la prise à fond.

Cet appareil numérique de la classe B est

conforme à la norme NMB-003 du Canada.

AVERTISSEMENT

La pile peut exploser si elle n’est pas

convenablement installée. Remplacez la pile par

la même pile ou son équivalent.

1

Français

INTRODUCTION

ÉCOUTE DES ŒUVRES

MUSICALES

INFORMATIONS

COMPLÉMENTAIRIES

PARTICULARITÉS...............................2

PRÉSENTATION DU SYSTÈME

MusicCAST..........................................3

Le serveur ................................................. 4

Le client.................................................... 4

L’amplificateur ......................................... 4

MISE EN SERVICE ...............................5

Utilisation du boîtier de télécommande.... 6

Utilisation du contrôleur de la face

avant ..................................................... 6

ÉCOUTE DES ŒUVRES

MUSICALES STOCKÉES SUR

LE SERVEUR .....................................7

Réglage du niveau sonore......................... 9

Réglage des tonalités .............................. 10

Sélection des indications de temps

affichées ............................................. 11

APRÈS LES OPÉRATIONS DE

BASE ..................................................12

Fonctions usuelles .................................. 12

Fonctions commodes .............................. 12

Écoute d’un appareil extérieur................ 12

Options système...................................... 13

Réglages de l’afficheur........................... 13

Réglages système.................................... 13

Autres ..................................................... 13

STRUCTURE DES MENUS................14

TABLE DES MATIÈRES

INTRODUCTION

ÉCOUTE DES ŒUVRES MUSICALES

INFORMATIONS COMPLÉMENTAIRIES

Sivu latautuu ...

Yamaha MCX-C15 - MusicCAST Network Audio Player Ohjekirja

Tämä käsikirja sopii myös

Yamaha MCX-C15 - MusicCAST Network Audio Player Ohjekirja

muilla kielillä

Liittyvät paperit

Muut asiakirjat