Panasonic WHADC1216H6E5C Käyttö ohjeet

Operating Instructions

Air-to-Water Hydromodule +

Tank

Manufactured by:

Panasonic AVC Networks Czech, s.r.o.

U Panasoniku 1, 320 84 Plzeň , Czech Republic

Model No.

Indoor Unit

WH-ADC1216H6E5C

Outdoor Unit

WH-UD12HE5*

WH-UD16HE5*

WH-UX09HE5*

WH-UX12HE5*

Operating Instructions

Air-to-Water Hydromodule +

Tank

2-29

English (EN)

Instrucciones de

funcionamiento

Hydrokit Aire-Agua + Tanque

30-57

Español (ES)

Istruzioni operative

Idromodulo aria-acqua +

serbatoio

58-85

Italiano (IT)

Gebruiksaanwijzing

Lucht-naar-water

Hydromodule + Tank

86-113

Nederlands (NL)

Instrukcja obsługi

Hydromoduł powietrze-woda +

zbiornik

114-141

Polski (PL)

Οδηγίες λειτουργίας

Υδρομονάδα Αέρα-Νερού +

Δεξαμενή

142-169

Ελληνικά (EL)

Návod k použití

Hydromodul vzduch-voda +

zásobník

170-197

Český (CZ)

Mode d’emploi

Ballon + Module Hydraulique

Air/Eau

198-225

Français (FR)

Bedienungsanleitung

Luft/Wasser-Hydromodul +

Warmwasserspeicher

226-253

Deutsch (DE)

Kullanım Kılavuzu

Hava-Su Hidromodülü + Tank

254-281

Türkçe (TR)

Bruksanvisning

Luft-till-vatten hydromodul +

Tank

282-309

Svenska (SV)

Bruksanvisninger

Luft-til-vann Hydromodul +

Tank

310-337

Norsk (NO)

Käyttöohjeet

Ilma-vesikiertomoduuli + säiliö

338-365

Suomi (FI)

Használati útmutató

Levegő-víz hidromodul +

tartály

366-393

Magyar (HU)

Navodila za uporabo

Hidromodul Zrak - Voda +

Rezervoar

394-421

Slovenščina (SL)

Upute za rad

Hidromodul zrak-voda +

spremnik

422-449

Hrvatski (HR)

Naudojimo instrukcijos

Hidromodulis oras-vanduo +

rezervuaras

450-477

Lietuvių (LT)

ACXF55-29440

2

Table of contents

Safety precautions .........................................................4-6

Remote Controller buttons and display .........................7-9

Initialization .......................................................................9

Quick Menu ....................................................................10

Menus ........................................................................10-24

For user

1 Function setup ...................................................10-11

1.1 Weekly timer

1.2 Holiday timer

1.3 Quiet timer

1.4 Room heater

1.5 Tank heater

1.6 Sterilization

1.7 DHW mode

2 System check .........................................................12

2.1 Energy monitor

2.2 System information

2.3 Error history

2.4 Compressor

2.5 Heater

3 Personal setup ...................................................12-13

3.1 Touch sound

3.2 LCD contrast

3.3 Backlight

3.4 Backlight intensity

3.5 Clock format

3.6 Date & Time

3.7 Language

3.8 Unlock password

4 Service contact .......................................................13

4.1 Contact 1 / Contact 2

For installer

5 Installer setup > System setup ..........................14-19

5.1 Optional PCB connectivity

5.2 Zone & Sensor

5.3 Heater capacity

5.4 Anti freezing

5.5 Buffer tank connection

5.6 Base pan heater

5.7 Alternative outdoor sensor

5.8 Bivalent connection

5.9 External SW

5.10 Solar connection

5.11 External error signal

5.12 Demand control

5.13 SG ready

5.14 External compressor SW

5.15 Circulation liquid

5.16 Heat-Cool SW

5.17 Force heater

5.18 Defrost signal

5.19 Pump ﬂ owrate

6 Installer setup > Operation setup ......................19-23

6.1 Heat

6.2 Cool

6.3 Auto

6.4 Tank

7 Installer setup > Service setup ..........................23-24

7.1 Pump maximum speed

7.2 Pump down

7.3 Dry concrete

7.4 Service contact

Cleaning instructions ......................................................25

Troubleshooting .........................................................26-27

Information .................................................................28-29

Thank you for purchasing Panasonic product.

Before operating the system, please read these operating instructions thoroughly and keep them for future reference.

Installation Instructions attached.

Serial number and production year please refer to name plate.

Before use, make sure the system has been installed correctly by an

authorised dealer according to the given instructions.

• Panasonic Air-to-Water is a split system, consisting of two units: indoor and outdoor units. The indoor unit consist of the

hydromodule and 200L sanitary water tank.

• These operating instructions describe how to operate the system using the indoor and outdoor units.

• As for the operation of other products such as radiator, external thermo controller, and underﬂ oor units, refer to the operating

instructions of each product.

• System could be locked to operate in HEAT mode and disable COOL mode.

• Some functions described in this manual may not be applicable to your system.

• Must use water that complies with European water quality standard 98/83 EC. The lifespan of the Tank Unit will be shorter if

groundwater (include spring water and well water) is used.

• The Tank Unit shall not be used with the tap water containing contaminants such as salt, acid, and other impurities which may

corrode the tank and its component.

• Consult your nearest authorised dealer for further information.

*

1

The system is locked to operate without COOL mode. It can be unlocked only by authorised installers or our authorised service

partners.

*

2

Only displayed when COOL mode is unlocked (This means when COOL mode is available)

3

Operating conditions

WH-UD series WH-UX series

*

1

COOLING

(CIRCUIT)

HEATING

(TANK)

HEATING

(CIRCUIT)

HEATING

(TANK)

HEATING

(CIRCUIT)

Water outlet temperature (°C)

(Min. / Max.)

- / 65 *

3

20 / 55 - / 65 *

3

20 / 55 (Below Ambient -15 °C) *

4

20 / 60 (Above Ambient -10 °C) *

4

5 / 20

Outdoor ambient temperature (°C)

(Min. / Max.)

-20 / 35 -28 / 35 16 / 43

When the outdoor temperature is out of the range in the table, the heating capacity will drop signiﬁ cantly and the outdoor unit may

stop operating for its protection.

The unit will restart automatically after the outdoor temperature returns to the speciﬁ ed range.

*

3

Above 55 °C, only possible with backup heater operation.

*

4

Between outdoor ambient -10 °C and -15 °C, the water outlet temperature gradually decreases from 60 °C to 55 °C.

EN

System overview

Radiator

Shower

Fan Coil

Unit

Floor

Heating

Outdoor Unit

Solar Panel

Power Supply

The illustrations in this manual are for explanation purposes only and may differ from the actual unit.

They are subject to change without notice for future improvement.

Note:

Not recommended to open the Front Plate.

(For authorised dealer/specialist use only)

Indoor Unit

Front Plate

Remote Controller

4

Safety precautions

To prevent personal injury, injury to others

or property damage, please comply with the

following:

Incorrect operation due to failure to follow

instructions below may cause harm or

damage, the seriousness of which is classiﬁ ed

as below:

This appliances is not intended for accessibility

by the general public.

WARNING

This sign

warns of

death or

serious

injury.

CAUTION

This sign

warns of

injury or

damage to

property.

The instructions to be followed are classiﬁ ed

by the following symbols:

This symbol denotes an

action that is PROHIBITED.

These symbols denote

actions COMPULSORY.

WARNING

Indoor unit and outdoor unit

This appliance can be used by

children aged from 8 years and above

and persons with reduced physical,

sensory or mental capabilities or

lack of experience and knowledge

if they have been given supervision

or instruction concerning use of

the appliance in a safe way and

understand the hazards involved.

Children shall not play with the

appliance. Cleaning and user

maintenance shall not be made by

children without supervision.

Please consult an authorised dealer

or specialist to clean the internal

parts, repair, install, remove,

disassemble and reinstall the unit.

Improper installation and handling will

cause leakage, electric shock or ﬁ re.

Conﬁ rm with authorised dealer or

specialist on usage of any speciﬁ ed

refrigerant type. Using refrigerant type

other than the speciﬁ ed may cause

product damage, burst and injury etc.

Do not use means to accelerate

the defrosting process or to clean,

other than those recommended by

manufacturer.

Any unﬁ t method or using

incompatible material may cause

product damage, burst and serious

injury.

Do not install the unit in a potentially

explosive or ﬂ ammable atmosphere.

Failure to do so could result in ﬁ re.

5

Do not insert your ﬁ ngers or

other objects into the Air to

water indoor or outdoor unit,

rotating parts may cause injury.

Do not touch the outdoor unit during

lightning, it may cause electric shock.

Do not sit or step on the unit,

you may fall down accidentally.

Do not install the indoor unit outdoors.

This is designed for indoor installation

only.

Power supply

Do not use a modiﬁ ed

cord, joint cord,

extension cord or

unspeciﬁ ed cord to

prevent overheating

and ﬁ re.

To prevent overheating, ﬁ re or electric

shock:

• Do not share the same power outlet

with other equipment.

• Do not operate with wet hands.

• Do not over bend the power supply

cord.

If the supply cord is damaged, it must

be replaced by the manufacturer,

service agent or similarly qualiﬁ ed

persons in order to avoid a hazard.

This unit is equipped with Residual

Current Circuit Breaker/Earth

Leakage Circuit Breaker (RCCB/

ELCB). Ask an authorised dealer

to check RCCB/ELCB operation

regularly, especially after installation,

inspection, and maintenance. RCCB/

ELCB malfunction may result in

electric shock and/or ﬁ re.

It is strongly recommended that Install

Residual Current Device (RCD)

on-site to prevent electric shock and/

or ﬁ re.

Before obtaining access to

terminals, all supply circuits must be

disconnected.

Stop using the product if any

abnormality/failure occurs and

disconnect the power supply.

(Risk of smoke/ﬁ re/electric

shock)

Examples of abnormality/failure

• RCCB/ELCB trips frequently.

• Burning smell is observed.

• Abnormal noise or vibration of the

unit is observed.

• Hot water leaks from the indoor unit.

Contact your local dealer immediately

for maintenance/repair.

Wear gloves during inspection and

maintenance.

This equipment must be earthed to

prevent electrical shock or ﬁ re.

Prevent electric shock by switching off

the power supply:

-Before cleaning or servicing,

-When extended non-use.

This appliance is for multiple uses. To

avoid electric shock, burn and/or fatal

injury, make sure to disconnect all

power supplies before accessing any

terminal in the indoor unit.

EN

Safety precautions

6

Safety precautions

CAUTION

Indoor unit and outdoor unit

Do not wash the indoor unit with

water, benzine, thinner or scouring

powder to avoid damage or corrosion

at the unit.

Do not install the unit close to

any combustibles or at bathroom.

Otherwise, it may cause electric

shock and/or ﬁ re.

Do not touch the sharp

aluminium ﬁ n, sharp parts

may cause injury.

Do not use the system during

sterilisation in order to prevent

scalding with hot water, or

overheating of shower.

Do not dismantle the unit for cleaning

purpose to avoid injury.

Do not step onto an unstable bench

when cleaning the unit to avoid injury.

Do not place a vase or water

container on the unit. Water may enter

the unit and degrade the insulation.

This may cause an electric shock.

Prevent water leakage by ensuring

drainage pipe is:

-Connected properly,

-Kept clear of gutters and containers,

or

-Not immersed in water

After a long period of use or use with

any combustible equipment, aerate

the room regularly.

After a long period of use, make

sure the installation rack does not

deteriorate to prevent the unit from

falling down.

Remote Controller

Do not wet the Remote Controller.

Failure to do so may result in electric

shock and/or ﬁ re.

Do not press the buttons on the

Remote Controller using hard and

sharp objects. Failure to do so may

cause damage to the unit.

Do not wash the Remote Controller

using water, benzine, thinner or

scouring powder.

Do not inspect or maintain the

Remote Controller by yourself.

Consult an authorised dealer in order

to prevent personal injury caused by

incorrect operation.

7

Remote Controller buttons and display

Buttons / Indicator

1

Quick Menu button

(For more details, refer to the separate

Quick Menu Guide.)

2

Back button

Returns to the previous screen

3 LCD Display

4

Main Menu button

For function setup

5

ON/OFF button

Starts/Stops operation

6

Operation indicator

Illuminates during operation, blinks during

alarm.

Press centre

No glove

No pen

2

1

4

5

6

3

Cross key buttons

Selects an item.

Enter button

Fixes the selected content.

Up

Down

Left Right

Safety precautions / Remote Controller buttons and display

EN

8

Remote Controller buttons and display

Display

1 Mode selection

*

1,

*

2

AUTO

• Depending on the preset outdoor

temperature, the system selects

HEAT or *

1,

*

2

COOL operation

mode.

Auto Heat Auto Cool

*

1,

*

2

COOL • COOL operation is either turned

ON or OFF.

• The outdoor unit provides cooling

to the system.

*

1,

*

2

AUTO

+ TANK

• Depending on the preset outdoor

temperature, the system selects

HEAT + TANK or *

1,

*

2

COOL +

TANK operation mode.

Auto Heat Auto Cool

*

1,

*

2

COOL

+ TANK

• The outdoor unit provides cooling

to the system.

• The outdoor unit provides heating

when boiling tank.

HEAT

• HEAT operation is either turned

ON or OFF.

• The outdoor unit provides heat to

the system.

TANK

• TANK operation is either turned

ON or OFF.

• The outdoor unit provides heat to

the water tank.

HEAT

+ TANK

• The outdoor unit provides heat to

the water tank and the system.

• This mode can be selected only

when the water tank is installed.

* The direction icons point to the currently

active mode.

• Room operation / Tank operation.

• Deice operation.

2

Operation icons

The status of operation is displayed.

Icon will not display (under operation OFF screen) whenever operation is OFF except weekly timer.

Holiday operation status Weekly Timer operation status Quiet operation status

Zone: Room Thermostat

→Internal sensor status

Powerful operation status

Demand Control or

SG ready or SHP status

Room Heater status Tank Heater status Solar status

Bivalent status

(Boiler)

*

1

The system is locked to operate without COOL mode. It can be unlocked only by authorised installers or our authorised service partners.

*

2

Only displayed when COOL mode is unlocked (This means when COOL mode is available).

2 43

1

5

6

7

9

Initialization

Before starting to install the various menu settings, please initiate the Remote Controller by selecting the language of

operation and installing the date and time correctly.

When power is turned on for the ﬁ rst time, it becomes the setting screen automatically. It can also be set from personal

setting of the menu.

Selecting the language

LCD blinking

Wait while the display is initializing.

When initializing screen ends, it turns to

normal screen.

When any button is pressed, language

setting screen appears.

1

Scroll with

and to select the language.

2

Press to conﬁ rm the selection.

Setting the clock

1

Select with

or how to display the time,

either 24h or am/pm format (for example, 15:00

or 3:00 pm).

2

Press to conﬁ rm the selection.

3

Use

and to select year, month, day, hour

and minutes. (Select and move with and

press to conﬁ rm.)

4

Once the time is set, time and day will appear

on the display even if the Remote Controller is

turned OFF.

3 Temperature of each zone

4 Time and day

5 Water Tank temperature

6 Outdoor temperature

7 Sensor type/Set temperature type icons

Water Temperature

→Compensation curve

Water Temperature

→Direct

Pool only

Room Thermostat

→External

Room Thermostat

→Internal

Room Thermistor

EN

Remote Controller buttons and display / Initialization

10

Menus

For user

Select menus and determine settings according to the system

available in the household. All initial settings must be done by an

authorised dealer or a specialist. It is recommended that all alterations

of the initial settings are also done by an authorised dealer or a

specialist.

• After initial installation, you may manually adjust the settings.

• The initial setting remains active until the user changes it.

• The Remote Controller can be used for multiple installations.

• Ensure the operation indicator is OFF before setting.

• The system may not work properly if set wrongly.

Please consult an authorised dealer.

To display <Main Menu>:

To select menu:

To conﬁ rm the selected content:

After the initial settings have been completed, you can select a quick menu from the following options and edit the setting.

1

Press

to display the quick menu.

Force DHW Powerful Quiet Force Heater

Weekly Timer Force Defrost Error Reset R/C Lock

2

Use to select menu.

3

Press to turn on/off the select menu.

Quick Menu

Menu Default Setting Setting Options / Display

1 Function setup

1.1

Weekly timer

Once the weekly timer is set up,

User can edit from Quick Menu.

To set up to 6 patterns of

operation on a daily basis.

• Disabled if Heat-Cool SW is

select “Yes” or if Force Heater

is on.

Timer setup

Select day of the week and

set the patterns needed

(Time / Operation ON/OFF / Mode)

Timer copy

Select day of the week

11

Menu Default Setting Setting Options / Display

1.2

Holiday timer

To save energy, a holiday

period may be set to either turn

OFF the system or lower the

temperature during the period.

OFF

ON

Holiday start and end.

Date and time

OFF or lowered temperature

• Weekly timer setting may be temporarily disabled during Holiday timer setting

but it will be restored once the Holiday timer is completed.

1.3

Quiet timer

To operate quietly during the

preset period.

6 patterns may be set.

Level 0 means the mode is off.

Time to start Quiet :

Date and time

Level of quietness:

0 ~ 3

1.4

Room heater

To set the room heater ON or

OFF.

OFF

1.5

Tank heater

To set the tank heater ON or

OFF.

OFF

1.6

Sterilization

To set the auto sterilization ON

or OFF.

ON

• Do not use the system during sterilization in order to prevent scalding with hot water, or overheating of shower.

• Ask an authorised dealer to determine the level of sterilization function ﬁ eld settings according to the local laws and

regulations.

1.7

DHW mode (Domestic Hot Water)

To set the DHW mode to

Standard or Smart.

• Standard mode have faster

DHW Tank heat up time.

Meanwhile Smart mode

take longer time to heat up

DHW time with lower energy

consumption.

Standard

To set the tank sensor to Top

or Center.

• Selection of the tank sensor

to top slow down the start of

boiling up the tank and reduce

power consumption.

Please change this selection

to “Center” when the hot water

becomes insufﬁ cient.

Top

Menus

For user

EN

Quick Menu / Menus

12

Menus

For user

Menu Default Setting Setting Options / Display

2 System check

2.1

Energy monitor

Present or historical chart of

energy consumption, generation

or COP.

Present

Select and retrieve

Historical chart

Select and retrieve

• COP= Coefﬁ cient of Performance.

• For historical chart, the period is selected from 1 day/1 week/1year.

• Energy consumption (kWh) of heating, *

1,

*

2

cooling, tank and total may be

retrieved.

• The total power consumption is an estimated value based on AC 230 V and

may differ from value measured by precise equipment.

2.2

System information

Shows all system information in

each area.

Actual system information of 10 items:

Inlet / Outlet / Zone 1 / Zone 2 / Tank /

Buffer tank / Solar / Pool / COMP

frequency / Pump ﬂ owrate

Select and retrieve

2.3

Error history

• Refer to Troubleshooting for

error codes.

• The most recent error code is

displayed at the top.

Select and retrieve

2.4

Compressor

Shows the compressor

performance.

Select and retrieve

2.5

Heater

Total hours of ON time for

Room heater/Tank heater.

Select and retrieve

3 Personal setup

3.1

Touch sound

Turns the operation sound ON/

OFF.

ON

3.2

LCD contrast

Sets the screen contrast.

3

*

1

The system is locked to operate without COOL mode. It can be unlocked only by authorised installers or our authorised service partners.

*

2

Only displayed when COOL mode is unlocked (This means when COOL mode is available).

13

Menu Default Setting Setting Options / Display

3.3

Backlight

Sets the duration of screen

backlight.

1 min

3.4

Backlight intensity

Sets screen backlight

brightness.

4

3.5

Clock format

Sets the type of clock display.

24h

3.6

Date & Time

Sets the present date and time.

Year / Month / Day / Hour / Min

3.7

Language

Sets the display language for

the top screen.

• For Greek, please refer to the

English version.

ENGLISH / FRANÇAIS / DEUTSCH /

ITALIANO / ESPAÑOL / DANISH /

SWEDISH / NORWEGIAN /

POLISH / CZECH / NEDERLANDS /

TÜRKÇE / SUOMI / MAGYAR /

SLOVENŠČINA / HRVATSKI / LIETUVIŲ

3.8

Unlock password

4 digit password for all the

settings.

0000

4 Service contact

4.1

Contact 1 / Contact 2

Preset contact number for

installer.

Select and retrieve

EN

Menus

14

Menus

For installer

Menu Default Setting Setting Options / Display

5 Installer setup System setup

5.1

Optional PCB connectivity

To connect to the external PCB

required for servicing.

No

• If the external PCB is connected (optional), the system will have following additional functions:

1

Buffer tank connection and control over its function and temperature.

2

Control over 2 zones (including the swimming pool and the function to heat water in it).

3

Solar function (the solar thermal panels connected to either the DHW (Domestic Hot Water) Tank or the Buffer Tank.

• DHW is not applicable for WH-ADC *models.

4

External compressor switch.

5

External error signal.

6

SG ready control.

7

Demand control.

8

Heat-Cool SW

5.2

Zone & Sensor

To select the sensors and to

select either 1 zone or 2 zone

system.

Zone

• After selecting 1 or 2 zone system, proceed

to the selection of room or swimming pool.

• If the swimming pool is selected, the

temperature must be selected for

T temperature between 0°C ~ 10 °C.

Sensor

* For room thermostat, there is a further

selection of external or internal.

5.3

Heater capacity

To reduce the heater power if

unnecessary.*

3 kW / 6 kW / 9kW

* Options of kW vary depending

on the model.

5.4

Anti freezing

To activate or deactivate the

water freeze prevention when

the system is OFF

Yes

15

Menu Default Setting Setting Options / Display

5.5

Buffer tank connection

To connect tank to the system

and if selected YES, to set

T temperature.

• The optional PCB connectivity

must be selected YES to

enable the function.

• If the optional PCB

connectivity is not selected,

the function will not appear on

the display.

No

Yes

5 °C

Set T for Buffer

Tank

5.6

Base pan heater

To select whether or not

optional base pan heater is

connected.

* Type A - The base pan heater

activates only during

deice operation.

* Type B -The base pan heater

activates when outdoor

ambient temperature is

5 °C or lower.

No

Yes

A

Set base pan heater

type*.

5.7

Alternative outdoor sensor

To select an alternative outdoor

sensor.

No

5.8

Bivalent connection

To select to enable or disable

bivalent connection.

No

Yes

To select either auto control

pattern or SG ready input

control pattern.

* This selection only display

to select when optional pcb

connection set to Yes.

Auto

EN

Menus

16

Menus

For installer

Menu Default Setting Setting Options / Display

To select a bivalent connection

to allow an additional heat

source such as a boiler to heat-

up the buffer tank and domestic

hot water tank when heatpump

capacity is insufﬁ cient at low

outdoor temperature. The

bivalent feature can be set-up

either in alternative mode

(heatpump and boiler operate

alternately), or in parallel

mode (both heatpump and

boiler operate simultaneously),

or in advance parallel mode

(heatpump operates and boiler

turns on for buffer-tank and/or

domestic hot water depending

on the control pattern setting

options).

Yes Auto

-5 °C

Set outdoor

temperature for

turn ON Bivalent

connection.

Yes After selecting the outdoor temperature

Control pattern

Alternative / Parallel / Advanced parallel

• Select advanced parallel for bivalent use of

the tanks.

Control pattern

Alternative

OFF

Option to set external

pump either ON or

OFF during bivalent

operation. Set to ON

if system is simple

bivalent connection.

Control pattern Advanced parallel

Heat Selection of the tank

• “Heat” implies Buffer Tank and “DHW”

implies Domestic Hot Water Tank.

Control pattern

Advanced parallel Heat Yes

• Buffer Tank is activated only after selecting

“Yes”.

-8 °C

Set the temperature

threshold to start the

bivalent heat source.

0:30

Delay timer to start

the bivalent heat

source

(in hour and minutes).

-2 °C

Set the temperature

threshold to stop the

bivalent heat source.

17

Menu Default Setting Setting Options / Display

0:30

Delay timer to stop

the bivalent heat

source

(in hour and minutes).

Control pattern Advanced parallel DHW Yes

• DHW Tank is activated only after selecting

“Yes”.

0:30

Delay timer to start

the bivalent heat

source

(in hour and minutes).

SG ready input control for

bivalent system follow below

input condition.

Yes SG ready

OFF

Option to set external

pump either ON or

OFF during bivalent

operation. Set to ON

if system is simple

bivalent connection.

SG signal Operation pattern

Vcc-bit1 Vcc-bit2

Open Open

Heat Pump OFF,

Boiler OFF

Short Open

Heat Pump ON,

Boiler OFF

Open Short

Heat Pump OFF,

Boiler ON

Short Short

Heat Pump ON,

Boiler ON

5.9

External SW

No

5.10

Solar connection

• The optional PCB connectivity

must be selected YES to

enable the function.

• If the optional PCB

connectivity is not selected,

the function will not appear on

the display.

• DHW is not applicable for

WH-ADC *models.

No

Yes

Buffer tank Selection of the tank

Yes After selecting the tank

10 °C

Set

T ON

temperature

EN

Menus

18

Menus

For installer

Menu Default Setting Setting Options / Display

Yes After selecting the tank T ON temperature

5 °C

Set

T OFF

temperature

Yes After selecting the tank T ON temperature T OFF temperature

5 °C

Set Antifreeze

temperature

Yes After selecting the tank T ON temperature T OFF temperature

After setting the antifreeze temperature

80 °C Set Hi limit

5.11

External error signal

No

5.12

Demand control

No

5.13

SG ready

No

Yes

120 %

Capacity (1) & (2)

of DHW (in %),

Heat (in %) and

Cool (in °C)

5.14

External compressor SW

No

5.15

Circulation liquid

To select whether to circulate

water or glycol in the system.

Water

19

*

1

The system is locked to operate without COOL mode. It can be unlocked only by authorised installers or our authorised service partners.

*

2

Only displayed when COOL mode is unlocked (This means when COOL mode is available).

Menu Default Setting Setting Options / Display

5.16

Heat-Cool SW

No

5.17

Force heater

To turn on Force heater either

manually (by default) or

automatically.

Manual

5.18

Defrost signal

To turn on defrost signal to stop

fan coil during defrost operation.

(If defrost signal set to yes,

bivalent function will not

available to use)

No

5.19

Pump ﬂ owrate

To set variable ﬂ ow pump

control or ﬁ x pump duty control.

T

6 Installer setup Operation setup

To access to the four major

functions or modes.

4 main modes

Heat / *

1,

*

2

Cool / *

1,

*

2

Auto / Tank

6.1

Heat

To set various water & ambient

temperatures for heating.

Water temp. for heating ON /

Outdoor temp. for heating OFF /

T for heating ON /

Heater ON/OFF

Water temp. for heating ON

Compensation curve

Heating ON

temperatures in

compensation curve

or direct input.

EN

Menus

20

Menus

For installer

Menu Default Setting Setting Options / Display

Water temp. for heating ON Compensation curve

X axis: -5 °C, 15 °C

Y axis: 55 °C, 35 °C

Input the 4

temperature points

(2 on horizontal X

axis, 2 on vertical Y

axis).

• Temperature range: X axis: -20 °C ~ 15 °C, Y axis: See below

• Temperature range for the Y axis input:

1. WH-UD model: 20 °C ~ 60 °C

2. WH-UH model & Back up heater is enabled: 25 °C ~ 65 °C

3. WH-UH model & Back up heater is disabled: 35 °C ~ 65 °C

4. WH-UX model: 20 °C ~ 60 °C

• If 2 zone system is selected, the 4 temperature points must also be input for Zone

2.

• “Zone 1” and “Zone 2” will not appear on the display if only 1 zone system.

Water temp. for heating ON Direct

35 °C

Temperature for

heating ON

• Min. ~ Max. range is conditional as follows:

1. WH-UD model: 20 °C ~ 60 °C

2. WH-UH model & Back up heater is enabled: 25 °C ~ 65 °C

3. WH-UH model & Back up heater is disabled: 35 °C ~ 65 °C

4. WH-UX model: 20 °C ~ 60 °C

• If 2 zone system is selected, temperature set point must input for Zone 2.

• “Zone 1” and “Zone 2” will not appear on the display if only 1 zone system.

Outdoor temp. for heating OFF

24 °C

Temperature for

heating OFF

T for heating ON

5 °C

Set

T for heating

ON.

* This setting will not

available to set when

pump ﬂ owrate set to

Max. duty.

Heater ON/OFF

Heater ON/OFF Outdoor temp. for heater ON

0 °C

Temperature for

heater ON

Sivu latautuu ...

Panasonic WHADC1216H6E5C Käyttö ohjeet

Panasonic WHADC1216H6E5C Käyttö ohjeet

muilla kielillä

Liittyvät paperit

Muut asiakirjat