Sony MZ-R50 Omistajan opas

3-861-298-14 (1)

Portable

MiniDisc Recorder

Operating instructions

Manual de instrucciones

Manual de Instruções

Bruksanvisning

Käyttöohjeet

Инструкция по эксплуатации

MZ-R50

1997 by Sony Corporation

Portable MiniDisc Recorder MZ-R50

EN

ES

P

S

FIN

R

2-EN

WARNING

To prevent fire or shock hazard, do not

expose the unit to rain or moisture.

To avoid electrical shock, do not open the

cabinet. Refer servicing to qualified

personnel only.

Caution

The use of optical instruments with this

product will increase eye hazard.

Information

IN NO EVENT SHALL SELLER BE

LIABLE FOR ANY DIRECT,

INCIDENTAL OR CONSEQUENTIAL

DAMAGES OF ANY NATURE, OR

LOSSES OR EXPENSES RESULTING

FROM ANY DEFECTIVE PRODUCT

OR THE USE OF ANY PRODUCT.

"MD WALKMAN" is a trademark of Sony

Corporation.

This mark is valid for Russian version only.

3-EN

Welcome!

Welcome to the world of the MiniDisc!

Here are some of the capabilities and

features you'll discover with the new

MiniDisc Recorder.

• Shock-resistant memory — Offsets up

to 40 seconds of optical read errors.

• Easy operation with the new remote

control — Keep the main unit in your

pocket and operate the MiniDisc player

through the shuttle dial on the remote

control; the LCD diplays track

information, playback mode as well as

battery condition.

• High-fidelity recording — Low-noise,

low-distortion, high-fidelity recording

through the optical digital input jack.

• Vertical jog dial — You can select your

desired tracks directly by simply

rotating a dial.

• Digital synchro-recording — The

recorder automatically starts and

pauses recording in sync with

operation on the connected digital

equipment.

• Sampling rate converter — This unit

enables you to record programs from

digital equipment using other

sampling rates, such as a BS tuner or

DAT deck.

• Long-time recording with monaural

sound — You can record up to 148

minutes on a disc using monaural

recording.

• Position pointer — The display shows

you the current location on the disc.

• Date and time stamp function — The

built-in clock automatically records the

date and time whenever you make a

recording.

• Title function — You can see disc and

track titles in the display while you are

playing/recording an MD.

EN

4-EN

Table of contents

Recording an MD right away! .................................6

Playing an MD right away!......................................8

Various ways of recording.....................................10

Two ways of connecting to a sound source ....................................... 10

Recording with digital input ............................................................... 11

To start/stop recording in sync with the source player

(Synchro-recording)......................................................................... 11

Recording from a microphone............................................................. 12

Recording in monaural for double the normal recording time ...... 13

Adjusting the recording level manually (Manual recording) ......... 13

Checking the remaining time or the recording position.................. 14

On the recorder ................................................................................ 14

On the remote control ..................................................................... 15

Setting the clock to stamp the recorded time .................................... 16

Various ways of playback ......................................17

Selecting the track number or track name directly........................... 17

Playing tracks repeatedly ..................................................................... 17

Emphasizing bass (DIGITAL MEGA BASS) ..................................... 18

Protecting your hearing (AVLS).......................................................... 18

Checking the remaining time or the playing position ..................... 19

On the recorder ................................................................................ 19

On the reomte control ..................................................................... 19

Locking the controls (HOLD) .............................................................. 20

Connecting to a stereo system ............................................................. 20

5-EN

Editing recorded tracks ..........................................21

Erasing tracks ......................................................................................... 21

To erase a track................................................................................. 21

To erase the whole disc ................................................................... 21

Adding a track mark ............................................................................. 22

Erasing a track mark ............................................................................. 22

Moving recorded tracks........................................................................ 23

Labeling recordings............................................................................... 23

Power sources.........................................................25

Using a lithium ion rechargeable battery........................................... 25

Using dry batteries ................................................................................ 26

Additional information ..........................................27

Precautions ............................................................................................. 27

Troubleshooting..................................................................................... 29

System limitations ................................................................................. 31

Messages ................................................................................................. 32

Specifications.......................................................................................... 34

What is an MD? ..................................................................................... 35

Looking at the controls ......................................................................... 37

6-EN

Make connections.

Insert a recordable MD.

Recording an MD right away!

Sound from CD players, cassettecorders, etc., will be sent

analogically, but recorded digitally, in stereo. To record from a digital

source, see “Recording with digital input” (page 11).

1 Slide OPEN and open the lid.

2 Insert a recordable MD with the

label side facing up, and press the

lid down to close.

2

1

to LINE OUT

to LINE IN (OPTICAL)

R (red)

L (white)

to DC IN 6V

AC power adaptor

(supplied)

CD player,

cassette recorder,

etc. (source)

Line cable

(RK-G129, not supplied)*

to a wall outlet

*Use the connecting cords without an

attenuator. To connect to a portable

CD player having a stereo mini-jack,

use the RK-G136 connecting cord

(not supplied).

7-EN

Record an MD.

3

1 Press and slide REC to the right .

“REC” lights up and recording starts.

2 Play the CD or tape you want to

record.

To stop recording, press p.

“Data Save“ or ”Toc Edit” flashes while data

of the recording (the track’s start and end

points, etc.) is being recorded. Do not move

or jog the recorder or disconnect the power

source while the indication is flashing in the

display.

CD player, cassette

recorder, etc. (source)

To

Pause

Record from the end of the

previous recording.

Record partway through the

previous recording.

Remove the MD.

Press

P

1)

Press P again to resume recording.

END SEARCH and slide REC.

(, + or = to find the start point

of recording and press p to stop. Then

slide REC.

p and open the lid.

2)

1)

A track mark is added at the point where you press P; thus the remainder of the track will be

counted as a new track.

2)

Once you open the lid, the point to start recording will change to the beginning of the first track.

Check the point to start recording on the display.

If the recording does not start

•Make sure the recorder is not locked (page

20).

•Make sure the MD is not record-protected

(page 28).

•Premastered MDs cannot be recorded over.

For models supplied with the AC plug

adaptor

If the AC power adaptor does not fit the wall

outlet, use the AC plug adaptor.

z

•The level of the recorded sound is adjusted

automatically.

•You can monitor the sound during

recording. Connect the supplied

headphones with remote control to 2/

REMOTE and adjust the volume by

pressing VOLUME +/– (VOL +/– on the

remote control). This does not affect the

recording level.

REC

p

8-EN

Playing an MD right away!

To use the recorder on a rechargeable battery or dry batteries, see

“Power Sources“ (pages 25, 26).

Make connections.

Insert an MD.

2 Insert an MD with the label side

facing up, and press the lid down to

close.

1 Slide OPEN and open the lid.

to a wall outlet

1

2

AC power adaptor

(supplied)

to DC IN 6V

to 2/REMOTE

Headphones with a

remote control

(supplied)

9-EN

Play an MD.

3

To

Pause

Find the beginning of the current track

Find the beginning of the next track

Go backwards while playing

1)

Go forward while playing

1)

Remove the MD

Press (Beeps in the headphones)

P (Continuous short beeps)

Press P again to resume play.

= once (Turn the control to =on the

remote control)

(Three short beeps)

+ once (Turn the control to (•+ on

the remote control)

(Two short beeps)

keep pressing = (Turn and hold the

control to = on the remote control)

keep pressing + (Turn and hold the

control to (•+ on the remote control)

p and open the lid.

2)

1)

To go backward or forward quickly without listening, press P and keep pressing = or +.

2)

Once you open the lid, the point to start play will change to the beginning of the first track.

If the play does not start

Make sure the recorder is not locked (page

20).

When using optional headphones

Use only headphones with stereo mini plugs.

You cannot use headphones with micro

plugs.

z

Playback will switch automatically between

stereo and monaural according to the sound

source.

VOL +/–

p

(

VOLUME

+/–

To stop play, press p.

A long beep sounds in the headphones.

1 Press ( (Turn the control to

(•+ on the remote control).

A short beep sounds in the headphones.

2 Press VOLUME (VOL on the remote

control) +/– to adjust the volume.

The volume will be shown in the display.

p

10-EN

Two ways of connecting to a sound source

The input jack of this recorder works as both digital and analog input jacks. Connect the

recorder to a CD player or a cassette recorder using either digital input or analog input. To

record, see “Recording with digital input” (page 11) to record using digital input, and

“Recording an MD right away!” (page 6) to record using analog input.

Difference between digital and analog inputs

zVarious ways of recording

Connectable source

Usable cord

Signal from the source

Recorded track numbers

Recorded sound level

Analog (line) input

Equipment with an analog

(line) output jack

Line cable (with 2 phono

plugs or a stereo-mini plug)

Analog

Even when a digital source

(such as a CD) is connected,

the signal sent to the recorder

is analog.

Marked automatically

•after more than 2 seconds of

blank or low-level segment.

•when the recorder is

paused while recording.

You can erase unnecessary

marks after recording

(“Erasing a track mark”,

page 22).

Adjusted automatically. Can

also be adjusted manually

(“Adjusting the recording

level manually”, page 13).

Difference

Input

Digital input

Equipment with an optical

digital output jack

Digital cable (with an optical

or an optical-mini plug)

Digital

Marked (copied)

automatically

•at the same positions as the

source.

•when the recorder is

paused while recording.

Note

Track marks may be copied incorrectly :

•when you record from some CD players or multi disc players using digital input.

•when the source is in shuffle or program play mode while recording using digital input. In this

case, play the source in normal play mode.

Same as the source

11-EN

To start/stop recording in

sync with the source player

(Synchro-recording)

You can easily make digital recordings of

a digital source on an MD.

Before synchro-recording, make

connections to the digital source with a

digital cable, and insert a recordable MD.

1 Slide SYNCHRO REC to ON.

“SYNC” appears in the display.

2 Press and slide REC to the right.

The recorder stands by for recording.

3 Play the source sound.

The recorder starts recording when it

receives the playing sound.

To stop recording, press p.

Recording with digital

input

This unit has a built-in sampling rate

converter so that you can record

programs from digital equipment using

other sampling rates, such as a BS tuner

or a DAT deck.

1 Insert a recordable MD and start

recording.

For recording operations, see

“Recording an MD right away !”

(page 6). To record from a portable

CD player, set the CD player to pause

and then start recording.

LINE IN (OPTICAL) jack is for both

digital and analog input

The recorder automatically recognizes the

type of line cable and switches to digital or

analog input.

Notes

•You can make a digital recording only from an

optical type output.

•When recording from a portable CD player,

play it on AC power and disable the anti-skip

function (such as ESP*).

* Electronic Shock Protection

SYNCHRO REC

Portable CD

player, etc.

Optical

mini-

plug

Optical

plug

CD player, MD player,

digital amplifier, etc.

to LINE IN

(OPTICAL)

POC-15B

etc.

(not supplied)

POC-15AB etc.

(not supplied)

CD players,

etc.

SYNC

continued

12-EN

Recording from a

microphone

Connect a stereo microphone (ECM-717,

ECM-MS907, ECM-MS957, etc.; not

supplied) to the MIC (PLUG IN POWER)

jack.

1 Select the sensitivity with MIC SENS

(at the bottom of the recorder) .

Usually, set it to HIGH. When

recording loud sounds such as a live

concert, set it to LOW.

2 Insert a recordable MD and start

recording.

Press and slide REC to the right.

“REC” lights up and recording starts.

For other operations, see “Recording

an MD right away! ” (page 6).

Note

To record from a microphone, you must first

disconnect any digital source. If connected,

the recorder will not switch to microphone

input.

MIC SENS (at the bottom)

to MIC

(PLUG IN

POWER)

Stereo microphone

z

•You cannot pause manually during

synchro-recording.

•When there is no sound from the player for

more than 3 seconds during synchro-

recording, the recorder goes into the

standby mode automatically. When the

sound comes from the player again, the

recorder resumes synchro-recording. If the

recorder is kept in the standby mode for 5

minutes or longer, the recorder stops

automatically.

Notes

•Do not switch SYNCHRO REC after step 2.

Recording may not be done properly.

•When recording in monaural, follow steps 1

and 2 of “Recording in monaural for double

the normal recording time” (page 13) before

synchro-recording .

13-EN

MODE

P

Recording in monaural

for double the normal

recording time

For longer recordings, choose to record in

monaural. The recording time becomes

double the normal.

1 While pressing P, press and slide

REC to the right.

The recorder stands by for recording.

2 Press MODE.

”Mono REC” appears in the display,

and the recorder switches to

monaural recording.

Press MODE again to record in

stereo.

3 Press P again to start recording.

4 Play the sound source.

To stop recording, press p.

The recorder switches back to stereo

recording when you record the next time.

Notes

•If you record a stereo source in monaural,

the sounds from left and right will be

mixed.

•You cannot record in monaural if

SYNCHRO REC is slid to ON.

•The MDs recorded in monaural can be

played back only with an MD player/

recorder that has the monaural playing

function.

Adjusting the recording

level manually

(Manual recording)

When you record with an analog input,

the sound level is adjusted automatically.

If necessary, you can set the level

manually.

1 While holding down P, press and

hold REC to the right for more than 2

seconds.

“ManualREC” appears and the

recorder stands by for recording.

To return to the automatic control,

while the recorder is in standby

mode, press and hold REC to the

right again for more than 2 seconds.

2 Play the source.

=

+

RECP

REC

continued

14-EN

Checking the remaining

time or the recording

position

On the recorder

1 Press DISPLAY while recording or in

stop mode. Each time you press the

button, the display changes as

follows.

B

A

B

Track number

Current date

1)

A

Elapsed time

Remaining time for

recording

Current time

1)

While recording

1)

Appears only when the clock is set.

DISPLAY

REC

indicator

3 While observing the level meter in

the display, adjust the recording level

by pressing + (+) or = (–).

Set the level so that it hits the seventh

indicator from the bottom at

maximum input level.

.

Note

Adjust the recording level while the

recorder is in standby mode. You

cannot adjust it while recording.

4 Press P again to start recording.

To stop recording, press p.

The recording level control is switched back

to automatic control.

Level meter

Volume decreases increases

z

When you record with microphone input,

select the sensitivity with MIC SENS (page

12).

Position pointer (shows the

current location on the MD)

15-EN

1)

Appears only if the track has been labeled.

2)

Appears only when the clock is set.

In stop mode

B

Track number

Track name

1)

Disc name

1)

Current date

2)

A

Elapsed time

Remaining time for

recording

Remaining time

after the current

location

Current time

2)

REC indicator

lights up

flashes according to

the loudness of the

source while

recording with a

microphone (voice

mirror)

flashes

flashes slowly

goes off

momentarily

To know the recording condition

The REC indicator lights up or flashes

according to the recording condition.

Recording

condition

While recording

Recording standby

Less than 3

minutes’ recording

time available

A track mark has

been added

z

If you want to check the playing position or

track name while playing, see page 19.

On the remote control

DISPLAY

1 Press DISPLAY while recording or in

stop mode. Each time you press the

button, the display changes as

follows.

BA

B

Elapsed time

Remaining time

for recording

Current time

1)

A

Track number

—

While recording

1)

Appears only when the clock is set.

1)

Appears only if the track has been labeled.

2)

Appears only when the clock is set.

In stop mode

B

Elapsed time

Track name

1)

Disc name

1)

Current time

2)

A

Track number

Number of tracks

in the disc

—

16-EN

Setting the clock to

stamp the recorded

time

To stamp the date and time on the MD

when you record, you first need to set the

clock.

1 Connect the power source.

Use the supplied AC power adaptor.

2 Press CLOCK SET at the bottom of

the recorder.

Use a pointed object.

The digits of the year flash.

3 Change the current year by pressing

= or +.

To change the digits rapidly, keep

pressing = or +.

4 Press ( to enter the year.

The digit of the month flashes.

5 Repeat steps 3 and 4 to enter the

current month, date, hour, and

minute.

When you press ( to enter the

minute, the clock starts operating.

If you make a mistake while

setting the clock

Press p, and set the clock again from step

2. You can skip a step by pressing (.

To display the current time

When the recorder is not operating or

while recording, press DISPLAY

repeatedly until the current time appears

in the display.

To display the time in the 24-

hour system

While setting the clock, press DISPLAY.

To display the time in the 12-hour system,

press DISPLAY again.

Charging the built-in battery for the

clock

When you use the recorder for the first time

or after a long period of disuse, charge the

built-in battery. After setting the clock, leave

the recorder connected to the AC power for

about 2 hours to charge the built-in battery.

Once charged, the built-in battery should last

about a month without connecting to any of

the power sources. The recorder will

automatically charge the built-in battery while

connected to AC power, dry batteries or a

rechargeable battery.

=

+

(

CLOCK SET

(at the bottom)

DATE

AM

17-EN

zVarious ways of

playback

Selecting the track

number or track name

directly

You can select the desired track directly

by using the vertical jog dial.

1 Rotate the jog dial to select a track,

and press it to play the selected track.

When you rotate the jog dial, the

track name* appears in the display.

To play the selected track, press the

jog dial.

* If the track has not been labeled, only

the track number appears in the

display.

z

If you select a track in shuffle play mode,

shuffle play starts from the selected track.

Vertical jog dial

Playing tracks

repeatedly

You can play tracks repeatedly in three

ways — all repeat, single repeat, and

shuffle repeat.

Press

to play.

Rotate

to select.

Play mode

All the tracks are

played once.

All the tracks are

played repeatedly.

A single track is

played repeatedly.

All the tracks are

played repeatedly in

random order.

Indication

none

(normal play)

“f”

(all repeat)

“f

1

”

(single repeat)

“f

SHUF

”

(shuffle repeat)

1 SHUF

Play mode indication

MODE

Ex; Display on the main unit

1 Press MODE (PLAY MODE on the

remote control) while the recorder is

playing an MD.

Each time you press the button, the

play mode indication changes as

follows.

PLAY

MODE

18-EN

BASS

Emphasizing bass

(DIGITAL MEGA BASS)

Mega Bass function intensifies low

frequency sound for richer quality audio

reproduction. It affects only the sound

from the headphones.

1 Press DIGITAL MEGA BASS.

Each time you press DIGITAL MEGA

BASS, the Mega Bass indication

changes as follows.

Protecting your hearing

(AVLS)

The AVLS (Automatic Volume Limiter

System) function keeps down the

maximum volume to protect your ears.

1 Set AVLS at the bottom of the

recorder to LIMIT.

When you try to turn the volume too

high, “AVLS” appears in the display.

The volume is kept to a moderate

level.

Notes

•If the sound becomes distorted when

emphasizing bass, turn down the volume.

•Mega Bass function does not affect the

sound being recorded.

•Mega Bass does not function when a line

cable is connected to the LINE OUT jack on

the recorder.

Play mode

Normal play

Mega Bass

(moderate effect)

Mega Bass (strong

effect)

Indication

none

“BASS ”

Mega Bass indication

DIGITAL MEGA BASS

AVLS

19-EN

Checking the remaining

time or the playing

position

On the recorder

DISPLAY

Position pointer (shows the

current location on the MD)

A

B

1)

Appears only if the track has been labeled.

2)

Appears only when the clock is set.

A

Elapsed time

Remaining time of

the current track

Remaining time

after the current

location

Recorded time

2)

B

Track number

Track name

1)

Disc name

1)

Recorded date

2)

1 Press DISPLAY while playing.

Each time you press DISPLAY, the

display changes as follows.

On the remote control

1 Press DISPLAY while playing.

Each time you press DISPLAY, the

display changes as follows.

DISPLAY

A

B

1)

Appears only if the track has been labeled.

2)

Appears only when the clock is set.

z

If you want to check the remaining time or

the recording position while recording or in

stop mode, see page 14.

A

Track number

The number of

tracks in the disc

—

B

Elapsed time

Track name

1)

Disc name

1)

Recorded time

2)

20-EN

Locking the controls

(HOLD)

To prevent the buttons from being

accidentally operated when you carry the

recorder, use this function.

1 Slide HOLD in the direction of the

c.

On the recorder, slide HOLD to lock

the controls of the recorder. On the

remote control, slide HOLD to lock

the controls of the remote control.

Slide HOLD in the opposite direction

of the arrow to unlock the controls.

HOLD

Connecting to a stereo

system

Connect the LINE OUT jack of the

recorder to the LINE IN jacks of an

amplifier or a tape player with a line cable

(RK-G129 or RK-G136, not supplied). The

output is analog. The recorder plays the

MD digitally and sends analog signals to

the connected equipment.

Note

The Mega Bass does not function or will be

cancelled when the LINE OUT jack is

connected with a line cable.

Portable DAT

recorder

Stereo

system, etc.

to LINE IN

2 phono plugs

Stereo

mini-plug

R

(red)

L (white)

RK-G136

(not

supplied)

RK-G129

(not

supplied)

to LINE OUT

Sivu latautuu ...

Sony MZ-R50 Omistajan opas

Sony MZ-R50 Omistajan opas

muilla kielillä

Liittyvät paperit

Muut asiakirjat