Tunturi F20 Omistajan opas

www.tunturi.com

Attention, Achtung, Attention, Attentie, Attenzione, Atención, Giv akt, Huomio

- Please read this Owner’s manual before assembling this product.

- Bitte lesen Sie dieses Handbuch durch, bevor Sie mit er Montage dieses Produkts beginnen.

- Veuillez lire ce manuel avant de commencer le montage de ce produit.

- Leest u deze handleiding voordat u dit apparaat installeert.

- Leggere questo manuale prima di assemblare questo prodotto.

- Lea este manual antes de montar este producto

- Läs bruksanvisningen innan du monterar denna produkt

- Lue tämä käsikirja ennen kokoamista tuotetta

WWW

F20 Upright Bike

GB User manual 15 - 20

DE Benutzerhandbuch 21 - 27

FR Manuel de l’utilisateur 28 - 34

NL Gebruikershandleiding 35 - 41

IT Manuale d‘uso 42 - 48

ES Manual del usuario 49 - 55

SV Bruksanvisning 56 - 62

SU Käyttöohje 63 - 69

3

F-20

A

4

F-20

B

1/1

User's Manual

1

1/1

NO.92 ﬂat Washer

φ

8*

φ

19*2t (4)

NO.94

shape knob M7*65L(1)

Screwdriver (1)

NO.91 SCREW M8*P1.25*60MM (4)

Allen Key(1)

Box Spanner(1)

F20B/F40B

5

F-20

C

NO.92 ﬂat Washer

φ

8*

φ

19*2t (4)

NO.94

shape knob M7*65L(1)

Screwdriver (1)

NO.91 SCREW M8*P1.25*60MM (4)

Allen Key(1)

Box Spanner(1)

100 cm

D-0

6

F-20

D-1

56

NO.92 ﬂat Washer

φ

8*

φ

19*2t (4)

NO.91 SCREW M8*P1.25*60MM (4)

NO.94

shape knob M7*65L(1)

Box Spanner(1)

Allen Key(1)

Screwdriver (1)

7

F-20

D-2

91

92

97

91

92

104

22

NO.92 ﬂat Washer

φ

8*

φ

19*2t (4)

NO.91 SCREW M8*P1.25*60MM (4)

NO.94

shape knob M7*65L(1)

Box Spanner(1)

Allen Key(1)

Screwdriver (1)

8

F-20

D-3

54-L

54-R

NO.94

shape knob M7*65L(1)

Box Spanner(1)

Allen Key(1)

Screwdriver (1)

9

F-20

D-4

18

20

19

40

77

21

10

A CB

NO.94

shape knob M7*65L(1)

Box Spanner(1)

Allen Key(1)

Screwdriver (1)

10

F-20

D-4B

A-2A-1

A-2

A-1

A-2

A-1

A

A-1 A-2 A-1

. . .

NO.94

shape knob M7*65L(1)

Box Spanner(1)

Allen Key(1)

Screwdriver (1)

11

F-20

D-5D-5

11

18

96

94

112

111

109

110

NO.94

shape knob M7*65L(1)

Box Spanner(1)

Allen Key(1)

Screwdriver (1)

12

F-20

D-6

2

1

19

14

Box Spanner(1)

Allen Key(1)

Screwdriver (1)

13

F-20

D-7

比例

57

63

Box Spanner(1)

Allen Key(1)

Screwdriver (1)

14

F-20

E

+

_

+

_

AA

F

15

English

Index

Upright Bike �� 15

Safety warnings �� 15

Assembly instructions �� 15

Description (g. A) ...........................................................................15

Package contents (g. B & C) ...........................................................15

Assembly (g. D) ..............................................................................16

Workouts �� 16

Exercise Instructions .........................................................................16

Heart rate .........................................................................................16

Use�� 17

Replacing the batteries (Fig. E) ........................................................17

Console (g F) �� 18

Explanation of buttons .....................................................................18

Explanation Display functions ..........................................................18

Operation .........................................................................................19

Cleaning and maintenance �� 19

Defects and malfunctions .................................................................19

Transport and storage �� 19

Additional information .....................................................................20

Technical data �� 20

Warranty �� 20

Declaration of the manufacturer �� 20

Disclaimer �� 20

Upright Bike

Welcome to the world of Tunturi New Fitness!

Thank you for purchasing this piece of Tunturi equipment.

Tunturi offers a wide range of home fitness equipment, including

crosstrainers, treadmills, exercise bikes and rowers. The Tunturi

equipment is suitable for the entire family, no matter what fitness

level. For more information, please visit our website

www.tunturi.com

Important Safety Instructions

This Owner’s Manual is an essential part of your training equipment:

reading all instructions in this manual before you start using this

appliance. The following precautions must always be followed:

Safety warnings

⚠ WARNING

• Read the safety warnings and the instructions. Failure to follow

the safety warnings and the instructions can cause personal

injury or damage to the equipment. Keep the safety warnings

and the instructions for future reference.

⚠ WARNING

• Heart rate monitoring systems may be inaccurate.

• Over exercise may result in serious injury or death. If you feel

faint stop exercising immediately.

- The equipment is suitable for domestic use only. The equipment is

not suitable for commercial use.

- Max. usage is limited to 3 hrs a day.

- The use of this equipment by children or persons with a physical,

sensory, mental or motorial disability, or lack of experience and

knowledge can give cause to hazards. Persons responsible for their

safety must give explicit instructions or supervise the use of the

equipment.

- Before starting your workout, consult a physician to check your

health.

- If you experience nausea, dizziness or other abnormal symptoms,

immediately stop your workout and consult a physician.

- To avoid muscular pain and strain, start each workout by warming

up and finish each workout by cooling down. Remember to stretch

at the end of the workout.

- The equipment is suitable for indoor use only. The equipment is

not suitable for outdoor use.

- Only use the equipment in environments with adequate ventilation.

Do not use the equipment in draughty environments in order not

to catch a cold.

- Only use the equipment in environments with ambient

temperatures between 10°C~35°C/ 50°F~95°F. Only store the

equipment in environments with ambient temperatures between

5°C~45°C/ 41°F~113°F.

- Do not use or store the equipment in humid surroundings. The air

humidity must never be more than 80%.

- Only use the equipment for its intended purpose. Do not use the

equipment for other purposes than described in the manual.

- Do not use the equipment if any part is damaged or defective. If a

part is damaged or defective, contact your dealer.

- Keep your hands, feet and other body parts away from the moving

parts.

- Keep your hair away from the moving parts.

- Wear appropriate clothing and shoes.

- Keep clothing, jewelry and other objects away from the moving

parts.

- Make sure that only one person uses the equipment at a time. The

equipment must not be used by persons weighing more than 120

kg (264 lbs).

- Do not open equipment without consulting your dealer.

Assembly instructions

Description (fig. A)

Your upright bike is a piece of stationary fitness equipment used to

simulate cycling without causing excessive pressure to the joints.

Package contents (fig. B & C)

- The package contains the parts as shown in

fig. B.

- The package contains the fasteners as shown in fig. C. Refer to the

section “Description”

‼ NOTE

• If a part is missing, contact your dealer.

16

English

Assembly (fig. D)

⚠ WARNING

• Assemble the equipment in the given order.

• Carry and move the equipment with at least two persons.

⚠ CAUTION

• Place the equipment on a firm, level surface.

• Place the equipment on a protective base to prevent damage to

the floor surface.

• Allow at least 100 cm of clearance around the equipment.

• Refer to the illustrations for the correct assembly of the

equipment.

‼ NOTE

• Save the tools provided with this product, after you completed

the product assembly,

for future service purposes.

Workouts

The workout must be suitably light, but of long duration. Aerobic

exercise is based on improving the body’s maximum oxygen uptake,

which in turn improves endurance and fitness. You should perspire,

but you should not get out of breath during the workout.

To reach and maintain a basic fitness level, exercise at least three

times a week, 30 minutes at a time. Increase the number of exercise

sessions to improve your fitness level.

It is worthwhile to combine regular exercise with a healthy diet. A

person committed to dieting should exercise daily, at first 30 minutes

or less at a time, gradually increasing the daily workout time to one

hour. Start your workout at low speed and low resistance to prevent

the cardiovascular system from being subjected to excessive strain.

As the fitness level improves, speed and resistance can be increased

gradually. The efficiency of your exercise can be measured by

monitoring your heart rate and your pulse rate.

Exercise Instructions

Using your fitness trainer will provide you with several benefits, it will

improve your physical fitness, tone muscle and in conjunction with a

calorie controlled diet help you lose weight.

The warming up phase

This stage helps get the blood flowing around the body and the

muscles working properly. It will also reduce the risk of cramp and

muscle injury. It is advisable to do a few stretching exercises as shown

below. Each stretch should be held for approximately 30 seconds, do

not force or jerk your muscles into a stretch - if it hurts, STOP

The exercise phase

This is the stage where you put the effort in. After regular use, the

muscles in your legs will become more flexible. Work to your but it is

very important to maintain a steady tempo throughout. The rate of

work should be sufficient to raise your heart beat into the target zone

shown on the graph below.

200

180

160

140

120

100

80

20 25 30 35 40 45 50 55 60 65 70 75

85 %

70 %

AGE

MAXIMUM

COOL DOWN

HEART RATE

TARGET ZONE

This stage should last for a minimum of 12 minutes though most

people start at about 15-20 minutes

The cool down phase

This stage is to let your Cardiovascular System and muscles wind

down. This is a repeat of the warm up exercise e.g. reduce your

tempo, continue for approximately 5 minutes. The stretching

exercises should now be repeated, again remembering not to force

or jerk your muscles into the stretch.

As you get fitter you may need to train longer and harder. It is

advisable to train at least three times a week, and if possible space

your workouts evenly throughout the week.

Muscle toning

To tone muscle while on your fitness trainer you will need to have the

resistance set quite high. This will put more strain on our leg muscles

and may mean you cannot train for as long as you would like. If you

are also trying to improve your fitness you need to alter your training

program. You should train as normal during the warm up and cool

down phases, but towards the end of the exercise phase you should

increase resistance making your legs work harder. You will have to

reduce your speed to keep your heart rate in the target zone.

Weight loss

The important factor here is the amount of effort you put in.

The harder and longer you work the more calories you will burn.

Effectively this is the same as if you were training to improve your

fitness, the difference is the goal.

Heart rate

Pulse rate measurement (hand pulse sensors)

The pulse rate is measured by sensors in the handlebars when the

user is touching both sensors at the same time. Accurate pulse

measurement requires that the skin is slightly moist and constantly

touching the hand pulse sensors. If the skin is too dry or too moist,

the pulse rate measurement will become less accurate.

‼ NOTE

• Do not use the hand pulse sensors in combination with a heart

rate chest belt.

• If you set a heart rate limit for your workout, an alarm will sound

when it is exceeded.

Heart rate measurement (heart rate chest belt)

‼ NOTE

• A chest strap does not come standard with this trainer. When

you like to use a wireless chest strap you need to purchase this

as an accessory.

The most accurate heart rate measurement is achieved with a heart

rate chest belt. The heart rate is measured by a heart rate receiver

in combination with a heart rate transmitter belt. Accurate heart

17

English

measurement requires that the electrodes on the transmitter belt are

slight moist and constantly touching the skin. If the electrodes are

too dry or too moist, the heart rate measurement will become less

accurate.

⚠ WARNING

• If you have a pacemaker, consult a physician before using a

heartrate chest belt.

⚠ CAUTION

• If there are several heart rate measurement devices next to each

other, make sure that the distance between them is at least 1.5

metres.

• If there is only one heart rate receiver and several heart rate

transmitters, make sure that only one person with a transmitter

is within transmission range.

‼ NOTE

• Do not use a heart rate chest belt in combination with the

handpulse sensors.

• Always wear the heart rate chest belt under your clothes directly

in contact with your skin. Do not wear the heart rate chest belt

above your clothes. If you wear the heart rate chest belt above

your clothes, there will be no signal.

• If you set a heart rate limit for your workout, an alarm will sound

when it is exceeded.

• The transmitter transmits the heart rate to the console up to a

distance of 1 metre. If the electrodes are not moist, the heart

rate will not appear on the display.

• Some fibers in clothes (e.g. polyester, polyamide) create static

electricity which can prevent accurate heart rate measurement.

• Mobile phones, televisions and other electrical appliances

create an electromagnetic field which can prevent accurate

heart rate measurement.

Maximum heart rate (during training)

The maximum heart rate is the highest heart rate a person can safely

achieve through exercise stress. The following formula is used to

calculate the average maximum heart rate: 220 - AGE. The maximum

heart rate varies from person to person.

⚠ WARNING

• Make sure that you do not exceed your maximum heart rate

during your workout. If you belong to a risk group, consult a

physician.

Beginner

50-60% of maximum heart rate

Suitable for beginners, weight-watchers, convalescents and persons

who have not exercised for a long time. Exercise at least three times a

week, 30 minutes at a time.

Advanced

60-70% of maximum heart rate

Suitable for persons who want to improve and maintain fitness.

Exercise at least three times a week, 30 minutes at a time.

Expert

70-80% of maximum heart rate

Suitable for the fittest of persons who are used to long-endurance

workouts.

Use

Adjusting the support feet

The equipment is equipped with 4 support feet. If the equipment is

not stable, the support feet can be adjusted.

- Turn the support feet as required to put the equipment in a stable

position.

- Tighten the locknuts to lock the support feet.

‼ NOTE

• The machine is the most stable when all support feet are turned

fully in. Therefore start to level the machine by turning all

support feet fully in, before turning out the required support

feet to stable the machine.

Adjusting resistance

To increase or decrease resistance, turn the adjustment knob at the

top of the handlebar support tube clockwise (+ direction) to increase

resistance and counter-clockwise (- direction) to decrease resistance.

The scale above the knob (1-8) helps you find and set a suitable

resistance.

Adjusting the console

The console can be adjusted according to the height and the exercise

position of the user.

- Loosen the console adjustment knob.

- Move the console to the required position.

- Tighten the console adjustment knob.

Adjusting the horizontal seat position

The horizontal seat position can be adjusted by setting the seat to

the required position.

- Loosen the seat adjustment knob.

- Move the seat to the required position.

- Tighten the seat adjustment knob.

Adjusting the vertical seat position

The vertical seat position can be adjusted by setting the seat tube

to the required position. With the leg almost straight, the arch of the

foot must touch the pedal at its lowermost point.

- Loosen the seat tube adjustment knob.

- Move the seat tube to the required position.

- Tighten the seat tube adjustment knob.

Adjusting the handlebar

The handlebar can be adjusted according to the height and the

exercise position of the user.

- Loosen the handlebar adjustment knob.

- Move the handlebar to the required position.

- Tighten the handlebar adjustment knob.

Replacing the batteries (Fig. E)

The console is equipped with 2 AA batteries at the rear of the

console.

- Remove the cover.

- Remove the old batteries.

- Insert the new batteries. Make sure that batteries match the (+) and

(-) polarity markings.

- Mount the cover.

18

English

Console (fig F)

1. Display

2. Tablet/ book support

3. Buttons

⚠ CAUTION

• Keep the console away from direct sunlight.

• Dry the surface of the console when it is covered with drops of

sweat.

• Do not lean on the console.

• Only touch the display with the tip of your finger. Make sure that

your nails or sharp objects do not touch the display.

‼ NOTE

• The console switches to standby mode when the equipment is

not used for 4 minutes. If the console is in standby mode, the

display shows the room temperature

Explanation of buttons

Up (Dail)

- Press UP Key to increase value. Press and hold the key to increase

value faster.

- TIME setting range: 00:00~99:00 (Each increment is 1:00)

- CAL setting range: 0~9990 (Each increment is 10)

- DIST setting range: 0.00~99.50 (Each increment is 0.5)

- PULSE setting range: 0-30~230 (Each increment is 1)

Down (Dail)

- Press DOWN Key to decrease value. Press and hold the key to

decrease the value faster.

- TIME setting range: 00:00~99:00 (Each decrement is 1:00)

- CAL setting range: 0~9990 (Each decrement is 10)

- DIST setting range: 0.00~99.50 (Each decrement is 0.5)

- PULSE setting range: 0-30~230 (Each decrement is 1)

Mode/ Enter

- Choose each function by pressing MODE/ENTER key.

- Press and hold MODE/ENTER key for 2 seconds to reset all

functions (same feature as the reset key if press for 2 seconds).

Reset

- In setting mode, press RESET key once to reset the current function

figures.

- Press RESET key and hold for 2 seconds to reset all function figures

Recovery

- After the console detects pulse signal, press the RECOVERY key to

enter recovery mode to monitor heart rate recovery ability

Body Fat

- Test body fat% and BMI.

Total reset

- Console will restart over.

Explanation Display functions

Scan

- In SCAN mode, press MODE/ENTER key to choose functions.

- Automatically scan through each mode in sequence every 6

seconds.

- The sequence of display when press MODE/ENTER key : TIME »

DIST » CAL » PULSE » RPM/SPEED

Speed

- Range 0.0 ~ 99.9

- Without any signal being transmitted into the monitor for 4

seconds during workout, SPEED will display “0.0”

RPM

- Range 0 ~ 999

- Without any signal being transmitted into the monitor for 4

seconds during workout, RPM will display “0”

Time

- Without setting the target value, time will count up.

- When setting the target value, time will count down from your

target time to 0 and alarm will sound or flash.

- Without any signal being transmitted into the monitor for 4

seconds during workout, time will STOP

- Range 0:00~99:59

Distance

- Without setting the target value, distance will count up.

- When setting the target value, distance will count down from your

target distance to 0 with an alarm sound or flash.

- Range 0.00~99.99

Calories

- Without setting the target value, calorie will count up.

- When setting the target value, calories will count down from your

target calorie to 0 with an alarm sound or flash.

- Range 0~9999

‼ NOTE

• This data is a rough guide for comparison of different exercise

sessions which cannot be used in medical treatment.

Pulse

- Current pulse will display after 6 seconds when detected by the

console.

- Without any pulse signal for 6 seconds, console will display “P”.

- Pulse alarm will sound when current pulse is over the target pulse.

- Range 0-30~230 BPM

19

English

Operation

Power on

- Press any key to power on the console when being in sleep mode..

- Start pedaling to power on the console when being in sleep mode.

LCD will display all segments as Drawing.

Power off

Without any signal being transmitted into the monitor for 4 minutes

the monitor will enter SLEEP mode automatically.

User Profile setting

- Use UP or DOWN (Dail) to set SEX, HEIGHT, WEIGHT and AGE.

- Press MODE/ENTER to confirm.

Workout setting

- Press MODE/ ENTER key to select the function of TIME,

DISTANCE, CALORIES, and PULSE. Use UP or DOWN (DAIL) for

setting and press MODE/ENTER key for confirmation.

- For instance the time set-up, when the time value is blinking, you

can use UP and DOWN (DAIL) to adjust the number. Press MODE/

ENTER key for confirmation and skip to next set-up. The set-up of

DISTANCE, CALORIES and PULSE is the same as TIME set-up.

- Once the workout begins and the console picks up the exercise

signal, the value of SPEED/RPM, TIME, DST and CAL will count up

on the display.

Recovery

- The RECOVERY key will only be valid if pulse is detected.

- TIME will show „0:60“ (seconds) and counts down to 0.

- Computer will show F1 to F6 after the countdown to test heart rate

recovery status. User can find the heart rate recovery level based

on the chart below.

- Press RECOVERY key again to return to the beginning.

F1 Outstanding

F2 Excellent

F3 Good

F4 Fair

F5 Below average

F6 Poor

Body Fat

- Press the BODY FAT key to start body fat measurement.

- During measuring, users have to hold both hands on the hand

grips. LCD display “-” “- -” “- - -” “- - - -” for 8 seconds until

computer finish measuring.

- LCD will display BMI and FAT %.

Body fat mode error codes

- *E-1

There is no heart rate signal input detected.

- *E-4

Occurs when FAT% and BMI result is below 5 or exceeds 50.

Cleaning and maintenance

The equipment does not require special maintenance. The

equipment does not require recalibration when it is assembled, used

and serviced according to the instructions.

⚠ WARNING

• Do not use solvents to clean the equipment.

- Clean the equipment with a soft, absorbent cloth after each use.

- Regularly check that all screws and nuts

are tight.

- If necessary, lubricate the joints.

Defects and malfunctions

Despite continuous quality control, defects and malfunctions caused

by individual parts can occur in the equipment. In most cases, it will

be sufficient to replace the defective part.

- If the equipment does not function properly, immediately contact

the dealer.

- Provide the model number and the serial number of the equipment

to the dealer. State the nature of the problem, conditions of use

and purchase date.

Trouble shooting:

- When the display of LCD is dim, it means the batteries need to be

changed.

- If there is no signal when you pedal, please check if the cable is

well connected.

‼ NOTE

• When stop training for 4 minutes, the main screen will be off.

• If the computer displays abnormally, please re-install the

batteries and try again.

Shaky or unstable feeling during use

If the machine feels unstable or unstable during operation, it is

advisable to adjust the support feet to bring the frame to the correct

height. Read the instructions in this manual in section: “Use”

Transport and storage

⚠ WARNING

• Carry and move the equipment with at least two persons.

- Remain standing in front of the equipment on each side and take

a sturdy grip at the handlebars. Tilt the front of the equipment

so as to lift the rear of the equipment on the wheels. Move the

equipment and carefully put the equipment down. Place the

equipment on a protective base to prevent damage to the floor

surface.

- Move the equipment carefully over uneven surfaces. Do not move

the equipment upstairs using the wheels, but carry the equipment

by the handlebars.

20

English

- Store the equipment in a dry place with as little temperature

variation as possible.

Additional information

Packaging disposal

Government guidelines ask that we reduce the amount of waste

material disposed of in land fill sites. We therefore ask that you

dispose of all packaging waste responsibly at public recycling centres.

End of life disposal

We at Tunturi hope you enjoy many years of enjoyable use from your

fitness trainer. However, a time will come when your fitness trainer will

come to the end of its useful life. Under ‘European WEEE Legislation

you are responsible for the appropriate disposal of your fitness trainer

to a recognised public collection facility.

Technical data

Parameter Unit of

measurement

Value

Telemetric heart rate

receiver

5.3~ 5.4 Khz.

BLE BT

ANT+





Length cm

inch

99,0

39,0

Width cm

inch

60,0

23,6

Height cm

inch

157,0

60.8

Weight kg

lbs

37

81.6

Max. user weight kg

lbs

120

265

Battery size 2pcs AA

Warranty

Tunturi purchaser‘s warranty

Warranty terms

The consumer is entitled to the applicable legal rights stated in the

national legislation concerning the commerce of consumer goods.

This warranty does not restrict these rights. The Purchaser’s Warranty

is only valid if the item is used in an environment approved by Tunturi

New Fitness BV for that particular equipment. The product-specific

approved environment is stated in the Owner’s Manual provided with

your equipment.

Warranty conditions

The warranty conditions commence from the date of purchase.

Warranty conditions may vary per country, so please consult your

local dealer for the warranty conditions.

Warranty coverage

Under no circumstances shall Tunturi New Fitness BV or the Tunturi

Distributor be liable by virtue of this warranty or otherwise for any

special, indirect, secondary or consequential damages of any nature

arising out of any use or inability to use this equipment.

Warranty limitations

This warranty covers manufacturing defects in the fitness equipment

as originally packed by Tunturi New Fitness BV. The warranty shall

apply only under conditions of normal, recommended use of the

product as described in the Owner’s Manual and providing that

Tunturi New Fitness BV’s instructions for installation, maintenance and

use have been complied with. Neither Tunturi New Fitness BV’s nor

the Tunturi Distributors’

obligations apply to defects due to reasons beyond their control. The

warranty applies only to the original purchaser and is valid only in

countries where Tunturi New Fitness BV has an authorised importer.

The warranty does not extend to fitness equipment or components

that have been modified without the consent of Tunturi New Fitness

BV. Defects resulting from normal wear, misuse, abuse, corrosion, or

damage incurred during loading or transportation are not covered.

The warranty does not cover sounds or noises emitted during use

where these do not substantially impede the use of the equipment

and where they are not caused by a fault in the equipment. The

warranty does not cover defects arising from the failure to carry

periodic maintenance as outlined within the Owner’s Manual for

the product. Furthermore, the warranty does not cover defects

arising from usage and storage within an unsuitable environment

as described within the Owner’s Manual which should be indoors,

dry, dust and grit free and within a temperature range of +15°C to

+35°C. The warranty does not cover maintenance activities, such as

cleaning, lubricating, and normal part adjustments, nor installation

procedures that customers can accomplish themselves, such as

changing uncomplicated meters, pedals and other similar parts not

requiring any dismantling/reassembling of the fitness equipment.

Warranty repairs carried out by other than authorised Tunturi

representatives are not covered.

Failure to follow the instructions given in the Owner’s Manual will

invalidate the product’s warranty.

Declaration of the manufacturer

Tunturi New Fitness BV declares that the product is in conformity with

the following standards and directives: EN 957 (HB), 89/336/EEC. The

product therefore carries the CE label.

04-2020

Tunturi New Fitness BV

Purmerweg 1

1311 XE Almere

The Netherlands

Disclaimer

The product and the manual are subject to change. Specifications can

be changed without further notice.

Sivu latautuu ...

Tunturi F20 Omistajan opas

Tunturi F20 Omistajan opas

muilla kielillä

Liittyvät paperit

Muut asiakirjat