Parkside KH3014 SOLDERING GUN WITH HOLDER Operation and Safety Notes

PLS 30

LÖDKOLV MED

MULTIFUNKTIONSSTÄLL

Bruksanvisning och säkerhetsanvisningar

FINLODDEKOLBE MED

MULTIFUNKTIONSHOLDER

Brugs- og sikkerhedsanvisninger

FEINLÖTKOLBEN MIT

MULTIFUNKTIONSHALTERUNG

Bedienungs- und Sicherheitshinweise

ΛΕΠΤΟ ΚΟΛΛΗΤΗΡΙ ΜΕ

ΠΟΛΥΧΡΗΣΤΙΚΗ ΛΑΒΗ

Υποδείξεις χειρισμού και ασφαλείας

JUOTIN JA TELINE

Käyttö- ja turvaohjeet

SOLDERING GUN WITH HOLDER

Operation and Safety Notes

SOLDERING GUN

WITH HOLDER

3

33381_PLS30_Cover_LB3.indd 6 03.06.09 09:25

GB / IE / CY Operation and Safety Notes Page 5

FI Käyttö- ja turvaohjeet Sivu 21

SE Bruksanvisning och säkerhetsanvisningar Sidan 35

DK Brugs- og sikkerhedsanvisninger Side 49

GR / CY Υποδείξεις χειρισμού και ασφαλείας Σελίδα 65

DE / AT / CH Bedienungs- und Sicherheitshinweise Seite 81

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions

of the device.

Käännä ennen lukemista kuvallinen sivu esiin ja tutustu seuraavaksi laitteen kaikkiin toimintoihin.

Vik ut bildsidan och ha den till hands när du läser igenom anvisningarna och gör dig bekant med

apparatens / maskinens funktioner.

Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner.

Πριν ξεκινήσετε την ανάγνωση, ανοίξτε τη σελίδα με τις εικόνες και εξοικειωθείτε με όλες τις

λειτουργίες της συσκευής.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend

mit allen Funktionen des Gerätes vertraut.

SOLDERING GUN

WITH HOLDER

33381_PLS30_Cover_LB3.indd 7 03.06.09 09:25

B C

A

1

3

2

4

7

8

5

6

D

6

5

33381_PLS30_Cover_LB3.indd 8 03.06.09 09:25

5 GB/IE/CY

Introduction

Proper use ..............................................................................Page 7

Features and equipment ........................................................Page 8

Included items ........................................................................Page 8

Technical information ............................................................Page 8

Safety advice

1. Workplace safety ..............................................................Page 9

2.

Electrical safety .................................................................Page 9

3. Personal safety ..................................................................Page 10

4. Careful handling and use of electrical power tools .......Page 12

Original accessories / attachments ......................................Page 13

Before ﬁrst use

Fitting the helical spring ........................................................Page 13

Inserting / replacing soldering tips .......................................Page 13

Operation

Switching on and oﬀ .............................................................Page 14

Third hand ..............................................................................Page 14

Solder sponge........................................................................Page 14

Soldering ................................................................................Page 15

Maintenance and cleaning .................................Page 15

Service centre ................................................................Page 16

Warranty ...........................................................................Page 16

Disposal ...............................................................................Page 18

Declaration of conformity / Producer ........Page 19

Table of Content

33381_Content_LB3.indd 5 08.06.09 13:07

6 GB/IE/CY

Introduction

The following pictograms are used in these operating

instructions / on the device:

Read instruction manual!

Observe caution and safety notes!

Caution – electric shock! Danger to life!

Risk of explosion!

Risk of ﬁre!

Warning - Hot surfaces!

V

~

Volt (AC)

W

Watts (Eﬀective power)

Wear a breathing / dust mask, protective glasses,

gloves and clothing.

Keep children away from electrical power tools!

For indoor use only!

Check that the device, mains lead and plug are in

good condition!

Do not smoke!

33381_Content_LB3.indd 6 08.06.09 13:07

7 GB/IE/CY

Introduction

Do not eat!

Do not drink!

Dispose packaging and appliance in an

environmentally-friendly way!

Soldering gun with holder

Q

Introduction

Please make sure you familiarise yourself fully with the way

the device works before you use it for the ﬁrst time and that

you understand how to handle it correctly. Please read the

operating instructions below. Be careful to keep these advice notes

and if necessary pass them on to a third party.

Q

Proper use

The device is intended for use in soldering electronics and model-mak-

ing. Use the device only as described and for the indicated purposes.

The device is not intended for commercial use. Any other use or modiﬁ-

cation to the device shall be considered as improper use and could

give rise to considerable dangers. The manufacturer will not accept

liability for loss or damage arising from improper use.

33381_Content_LB3.indd 7 08.06.09 13:07

8 GB/IE/CY

Introduction

Q

Features and equipment

1

Soldering pencil

2

Soldering tip

3

Clamp screw

4

Helical spring

5

Clips

6

Third hand

7

Multifunctional holder

8

Solder sponge

Q

Included items

1 Soldering pencil

1 Multifunctional holder

1 Tin solder, 10 grams

2 Soldering tips (1x installed)

1 Solder sponge

1 Operating instructions

Q

Technical information

Electricity supply: 230 V

~

Frequency: 50 Hz

Power consumption: 30 W

33381_Content_LB3.indd 8 08.06.09 13:07

9 GB/IE/CY

Safety advice

J CAUTION! Failure to observe the instructions and advice given

below may result in electric shock, ﬁre and/or serious injury.

1. Workplace safety

a) Keep your working area clean and well lit. Untidy or

poorly lit working areas can lead to accidents.

b)

Do not work with the device in potentially

explosive environments in which there are

inflammable liquids, gases or dusts. Electrical

power tools create sparks, which can ignite dusts or fumes.

c)

Keep children and other people away

while you are operating the electrical tool.

Distractions can cause you to lose control of the device.

2. Electrical safety

To avoid danger to life from electric shock:

a)

The mains plug on the device must match

the mains sock-

et. The plug must not be modified in any way. Do not

use an adapter plug with devices fitted with a protec-

tive earth. Unmodiﬁed plugs and matching sockets reduce the

risk of electric shock.

33381_Content_LB3.indd 9 08.06.09 13:07

10 GB/IE/CY

Safety advice

b) Keep the device away from rain or moisture. Water

entering an electrical device increases the risk of electric shock.

c) Use a residual current device (RCD) for protection if

operating the electrical power tool in a moist envi-

ronment is unavoidable. The use of an RCD reduces the risk

of electric shock.

d)

Do not use the mains lead for any purpose for

which it was not intended, e.g. to carry the

device, to hang up the device or to pull the

mains plug out of the mains socket. Keep the mains

lead away from heat, oil, sharp edges or moving parts

of the device. Damaged or tangled mains leads increase the

risk of electric shock.

e) Do not operate the device if the mains lead or mains plug is

damaged.

WARNING!

A damaged mains lead presents a serious

danger to life from electric shock.

f) Always keep the mains lead out of the operating area and run it

away from the rear of the device.

g) Always pull out the mains plug if you are about to leave the device

unattended or wish to carry out any tasks on the device.

3. Personal safety

a) Children or persons who lack the knowledge or ex-

perience to use the device or whose physical, sensory

or intellectual capacities are limited must never be

allowed to use the device without supervision or in-

struction by a person responsible for their safety.

Children must never be allowed to play with the device.

33381_Content_LB3.indd 10 08.06.09 13:07

11 GB/IE/CY

Safety advice

b) Remain alert at all times, watch what you are doing

and always proceed with caution. Do not use the

device if you are tired or under the influence of

drugs, alcohol or medication. One moment of carelessness

when using the device can lead to serious injury.

J DANGER OF BURNS! Never touch the hot soldering

tip or the molten solder. You could suﬀer burn injuries.

Always let the device cool before you replace components

on the device, clean it or check its condition.

J After use let the soldering pencil cool down in air only. Under no

circumstances quench the tip in water!

J CAUTION! DANGER OF FIRE! Place the soldering

pencil down only in the special multifunctional holder

or on a ﬁre-resistant pad.

J Place the soldering pencil in the multifunctional holder during

pauses in your work.

J Keep the device away from combustible material.

J Never leave the device switched on and unattended.

CAUTION! DANGER OF INJURY! Keep your hands away

from the hot workpiece. The heat from soldering can be conducted

through the workpiece. For this reason you should use the third

hand to hold small workpieces.

J Avoid placing the hot soldering tip in contact with the plastic parts

of the multifunctional holder. Failure to observe this advice may

result in damage to the device.

J If a dangerous situation arises, pull the mains plug immediately

out of the mains socket.

CAUTION! DANGER OF POISONING! Do not breathe air

contaminated with soldering fumes.

J When working with the device for long periods do not

allow the fumes from soldering to build up. They may

be hazardous to health. Always provide adequate

33381_Content_LB3.indd 11 08.06.09 13:07

12 GB/IE/CY

Safety advice

ventilation of your working area. In addition, it is recommended

that you wear protective gloves, a face mask and a protective apron.

J

Do not eat, drink or smoke in rooms where soldering is carried

out. Otherwise your hands may transfer any adhering traces of

lead via food or cigarettes into your body.

J Always wash your hands immediately after soldering .

J Do not dispose of soldering waste with the household rubbish.

Soldering waste must disposed of as special waste.

4. Careful handling and use of electrical

power tools

a) When not in use always ensure that electrical power

tools are kept out of reach of children. Do not let any-

one use the device if he or she is not familiar with it

or has not read the instructions and advice. Electrical

power tools are dangerous when they are used by inexperienced

people.

b) Look after the device carefully. Check for broken

parts or parts that are damaged to the extent they

detrimentally affect the functioning of the device.

Have any damaged parts repaired before you use

the device. Many accidents have their origins in poorly main-

tained electrical tools.

33381_Content_LB3.indd 12 08.06.09 13:07

13 GB/IE/CY

Safety advice / Before ﬁrst use

Q

Original accessories / attachments

J Use only the accessories detailed in the operating instructions. The

use of attachments or accessories other than those recommended

here could lead to you suﬀering an injury.

Q

Before ﬁrst use

Q

Fitting the helical spring

j Insert the narrower end of the helical spring

4

into the opening

of the multifunctional holder

7

. Ensure that the outwardly bent

end of the helix points upwards and insert it into the recess provid-

ed for it in the multifunctional holder

7

(see arrow in Fig. C).

j Push the helical spring

4

into the opening as far as it will go.

j Turn the helical spring

4

clockwise to ﬁx the multifunctional

holder

7

in place.

Q

Inserting / replacing soldering tips

CAUTION! DANGER OF BURNS! Allow the soldering

pencil to heat up without a soldering tip.

1. Insert a soldering tip

2

into the soldering pencil

1

to a depth of

half of its shaft length.

2. Tighten the clamp screw

3

using a Phillips screwdriver.

j Remove the soldering tip only when the device has been switched

oﬀ and the soldering tip

2

has cooled.

33381_Content_LB3.indd 13 08.06.09 13:07

14 GB/IE/CY

Operation

Q

Operation

The mains voltage must correspond with that shown on the sander rat-

ing plate. Equipment labelled as 230 V may also be used with 220 V.

Q

Switching on and oﬀ

Switching on:

j Insert the mains plug into a suitable mains socket.

Switching off:

j Pull the plug out of the mains socket to switch oﬀ the device.

Q

Third hand

CAUTION! DANGER OF BURNS! The clips

5

on the

third hand

6

can become hot while you are soldering the

workpiece.

1. Fold out the third hand

6

upwards.

2. Rotate the clips

5

until they are oriented in the required direction.

3. Clamp the workpiece between the two clips

5

.

Q

Solder sponge

CAUTION! The hot soldering tip

2

must never be placed in

contact with a dry solder sponge

8

, otherwise the solder sponge

may be damaged.

j The solder sponge

8

is used to clean soldering tips.

j Moisten the solder sponge

8

before you use it.

33381_Content_LB3.indd 14 08.06.09 13:07

15 GB/IE/CY

Operation / Maintenance and cleaning

Q

Soldering

— The soldering pencil has a rated output of 30 watts and is there-

fore ideal for electronics soldering.

— The design of the soldering pencil makes it especially suitable for

use where access is diﬃcult or for ﬁne soldering work.

— To achieve the best results use electronics solder 1.0 (10 g elec-

tronics solder with integrated ﬂux is included) or 1.5 mm diameter

60 % Sn. We recommend the use of soldering paste (not soldering

grease or soldering ﬂuid) as a ﬂux.

j Clean the soldering tip

2

on the moist solder sponge

8

.

j After cleaning the tip

2

it must be “tinned” (coated with solder).

This is done by melting solder on to the hot soldering tip

2

.

j Guide the soldering tip

2

to the intended joint site and heat the joint.

j Place the solder (with ﬂux) between the joint site and the tip

2

to melt it.

j Continue to feed further solder until the whole joint has a covering

of solder.

j Then quickly remove the soldering tip in order to avoid overheating

the molten solder.

j Allow the solder to harden while not subjecting it to vibration or

movement.

j Note: The ﬂux is either already contained in the solder or applied

separately. Ask the advice of the retailer when buying solder in or-

der to choose the most suitable solder for your intended purpose.

Q

Maintenance and cleaning

WARNING!

RISK OF INJURY! Before you carry out any work

on the device always pull the mains plug out of the mains socket and

allow the device to cool.

33381_Content_LB3.indd 15 08.06.09 13:07

16 GB/IE/CY

Maintenance and cleaning / Service centre / Warranty

j Clean the device after you have ﬁnished using it.

j Use a cloth and a little mild detergent for cleaning the device.

j In no circumstances use sharp objects, or petrol, solvents or

cleaning agents that might attack plastic.

j Do not allow any liquids to enter the inside of the device.

Q

Service centre

J

WARNING!

Have your device repaired

only by

qualified specialist personnel using original manu-

facturer parts only. This will ensure that your device remains

safe to use.

J

WARNING!

If the plug or mains lead needs to be

replaced, always have the replacement carried out

by the manufacturer or his service centre. This will ensure

that your device remains safe to use.

Q

Warranty

This appliance is guaranteed for 3 years

from the date of

purchase. It has been care

fully produced and meti-culous-

ly checked

before delivery. Please keep your receipt as

proof of purchase. Contact your service centre by telephon

e

in case of questions pertaining to the warranty. Your

goods can be transmitted free of cost only in this man-

ner. This warranty applies only to the initial purchaser

and is non-transferable.

33381_Content_LB3.indd 16 08.06.09 13:07

17 GB/IE/CY

Warranty

The warranty covers only material or manufacturing faults, not normal

wear or damage to fragile parts such as switches or rechargeable bat-

teries. The appliance is intended solely for private, not commercial, use.

If this product has been subjected to improper or inappropriate handling,

abuse, or interventions not carried out by one of our authorised sales

and service outlets, the warranty will be considered void. This warranty

does not aﬀect your statutory rights.

GB

DES Ltd

Units 14-15

Bilston Industrial Estate

Oxford Street

Bilston (Great Britain)

WV14 7EG

Tel.: 0870 / 787-6177

Fax: 0870 / 787-6168

e-mail: support.uk@kompernass.com

IE

Kompernaß Service Ireland

Tel.: 1850 930 412 (0,082 €/Min.)

* Standard call rates apply. Mobile operators

may vary.

e-mail: support.ie@kompernass.com

33381_Content_LB3.indd 17 08.06.09 13:07

18 GB/IE/CY

Disposal

Q

Disposal

The packaging and ancillary packing consist wholly of

environmentally friendly materials. They can be disposed

of at your local recycling facility.

Do not dispose of electrical devices

with the household rubbish!

In accordance with European Directive 2002 / 96 / EC (covering

waste electrical and electronic equipment) and its transposition into

national legislation, worn out electrical devices must be collected sep-

arately and taken for environmentally compatible recycling.

Contact your local refuse disposal authority for more details of how to

dispose of your worn-out devices.

33381_Content_LB3.indd 18 08.06.09 13:07

19 GB/IE/CY

Declaration of conformity / Producer

Q

Declaration of conformity / Producer

We, Kompernaß GmbH, Burgstr. 21,

D-44867 Bochum, Germany, hereby declare that this product

complies with the following EU directives:

EU Low Voltage Directive (2006 / 95 / EC)

Electromagnetic Compatibility (2004 / 108 / EC)

Device type / description:

Soldering gun with holder

Bochum, 30.06.2009

Hans Kompernaß

- Managing Director -

We reserve the right to make technical modiﬁcations in the course of

further development.

33381_Content_LB3.indd 19 08.06.09 13:07

20

33381_Content_LB3.indd 20 08.06.09 13:07

21 FI

Sisällysluettelo

Johdanto

Määräystenmukainen käyttö ................................................Sivu 23

Varusteet .................................................................................Sivu 24

Toimitusmäärä ........................................................................Sivu 24

Tekniset Tiedot ........................................................................Sivu 24

Turvallisuusohjeita

1. Työpaikkaturvallisuus ........................................................Sivu 25

2.

Sähköturvallisuus ...............................................................Sivu 25

3. Henkilöiden turvallisuus ....................................................Sivu 26

4.

Sähkötyökalujen huolellinen käsittely ja käyttö ..............Sivu 28

Alkuperäistarvikkeet /-lisälaitteet ..........................................Sivu 28

Ennen käyttöönottoa

Kierrejousen asentaminen .....................................................Sivu 29

Juottokärjen asentaminen / vaihtaminen ..............................Sivu 29

Käyttöönotto

Kytkeminen päälle ja pois päältä.........................................Sivu 30

Kolmas käsi ............................................................................Sivu 30

Puhdistussieni .........................................................................Sivu 30

Juottaminen ............................................................................Sivu 31

Huolto ja puhdistus ...................................................Sivu 31

Huolto ...................................................................................Sivu 32

Takuu .....................................................................................Sivu 32

Hävitys .................................................................................Sivu 33

Yhdenmukaisuus / Valmistaja .........................Sivu 34

33381_Content_LB3.indd 21 08.06.09 13:07

Sivu latautuu...

Parkside KH3014 SOLDERING GUN WITH HOLDER Operation and Safety Notes

Tämä ohje sopii myös

Parkside KH3014 SOLDERING GUN WITH HOLDER Operation and Safety Notes

muilla kielillä

Aiheeseen liittyviä papereita

Muut asiakirjat