Jablocom EYE-02 Ohjekirja

Brändi: Jablocom

Malli: EYE-02

Tyyppi: Ohjekirja

EYE-02.ENG.MAN.User_Manual.24.A

- 1 -

GSM Security Camera

EYE-02

User Guide

Watch your Life

Anytime from

Anywhere

SMS CALL MMS MAIL VIDEO WWW JabloTool

EYE-02.ENG.MAN.User_Manual.24.A

- 2 -

EYE-02 camera:

Package contents:

II.

EYE-02 camera

Camera lens

PIR motion sensor

Green light

Red light

Infrared light

GSM Antenna

Power button

AC adaptor socket

USB connector

Battery cover

Battery

Installation CD

Remote control

Screwdriver

User manual

AC adapter

Wall mounting screws

Connecting cable

USB cable

EYE-02.ENG.MAN.User_Manual.24.A

- 3 -



______________________________________________________________________________________________

Considerable effort has been made to ensure that this manual is free of inaccuracies and omissions. However, as we are constantly

improving our products, if you need exact specications, please contact JABLOCOM.



1.1 Basic Features

EYE-02 is a security and monitoring camera that communicates wirelessly via the GSM network. You can access,

control and congure your EYE-02 GSM camera also via web by going to www.jablotool.com.

EYE-02 integrates the following built-in detectors that allow an intruder to be detected:

Infrared motion detector Detects movement by sensitive detection of human body temperature

Motion-in-Picture detector Detects changes in a scene by taking snapshots regularly and comparing them

Glass break detector Recognizes the specic sound of breaking window glass

Door opening detector Detects opening (or closing) of doors and windows by sensing air pressure changes.

Tilt detector Recognizes any unwanted change in the camera‘s position and angle

Touch detector Recognises micro vibrations of camera body caused by touching it by hand or

another object.

Noise detector Microphone which detects a noise above a dened level

• EYE-02 is simple to install and congure (suitable for DIY installation).

• EYE-02 records every detected event into its memory.

• EYE-02 sends an alarm record using MMS, e-mail, SMS, voice call or sends alarm records to external server for

further use in applications. It can also report events to Alarm Receiving Centers of professional security agenci-

es. Copies of pictures and videos can be stored on the memory card.

• EYE-02 allows 24 hour monitoring via its night view mode.

• EYE-02 is compatible with a wide range of external Wireless Peripherals (refer to the table on the inside back

cover of this manual).

 



 

1.1 Basic Features ............................................... 3

1.2 EYE-02 Camera Description......................... 4

1.3 EYE-02 Camera Internal Components ......... 4



2.1 Package Contents .........................................4

2.2 Installation .....................................................4



3.1 Switching ON and OFF ..................................5

3.2 Wireless Remote Control ..............................5

3.3 Working Modes ............................................. 6

3.4 Cong Mode ..................................................6

3.5 Proles ...........................................................7

3.6 Detectors .......................................................8

3.7 Reports & Contacts .......................................9

3.8 Security settings .......................................... 10

 

4.1 Set-Up and Conguration via PC ................ 11

4.2 Control by SMS Commands........................ 12

4.3 Conguration by SMS Commands ............. 13

4.4 Call Control .................................................. 14

4.5 Reset to factory defaults ............................. 15

 

5.1 Night View .................................................... 15

5.2 Battery ......................................................... 15

5.3 Micro SD card .............................................. 16

5.4 External Wireless Peripherals .................... 16

5.5 Outdoor Installation ..................................... 17

 

 

7.1 GSM Network Setting .................................18

 

8.1 Battery Information ...................................... 19

8.2 Warranty ......................................................20

8.3 Safety Instructions ......................................20

8.4 Licence Compliance .................................... 21

8.5 Disposal Information ................................... 21

EYE-02.ENG.MAN.User_Manual.24.A

- 4 -

1.2 EYE-02 Camera Description

Please refer to the picture A on the inside front cover of this manual.

You can access, control and congure the EYE-02 camera via web by establishing your account

on www.jablotool.com.

1.3 EYE-02 Camera Internal Components

Internal components of the EYE-02 camera are displayed in the picture “D” on the back cover of this manual.



Before installing the camera, ensure you have a SIM card provided by your GSM operator with

an activated EDGE/GPRS internet connection and MMS service.

Some SIM cards are protected by a PIN code. It is necessary to disable the SIM card's PIN

code protection. To do this, insert the SIM into your mobile phone and disable the PIN security

code. If this is not observed, the EYE-02 camera may not operate correctly.

2.1 Package Contents

Unpack the camera and check the package contents. Please refer to picture “B” on inside front cover of this manual.

Use only batteries, chargers and accessories approved by JABLOCOM for use with this parti-

cular model. The use of any unapproved device may invalidate any approval or warranty, and

may be dangerous.

2.2 Installation

For an extended graphic version of the installation procedure, see the Quick Guide manual.

Before inserting the SIM card into the camera make sure that:

- PIN protection is disabled

- MMS service is enabled

- Internet data access is enabled

• Insert the SIM card and battery into the camera

Unscrew and open the battery cover. Insert the SIM card. Insert the battery and screw the cover

back on.

• Install the camera in the selected position

Mark and drill out mounting holes in

the wall. Mount the camera holder

rmly.

Adjust the camera position. Remove the lens protection.

• Connect the camera to a power source

EYE-02.ENG.MAN.User_Manual.24.A

- 5 -

Plug the power cable into the camera. Plug the power adaptor into a wall socket.

The camera will automatically switch on.

Wait 30 seconds and check the EYE-02 camera LED lights on the front panel.

• Enroll your mobile phone to the camera.

Call the camera number from

your mobile phone.

On the remote control, press the

button.



3.1 Switching ON and OFF

To switch the camera on, press and hold the power button on the back panel of the camera. Keep holding the button

until the green light on the front panel switches on. The start-up process has started and you can release the button.

The camera also starts up automatically after it is connected to the AC adaptor or to a PC via a USB cable.

To switch the camera OFF, switch the camera to CONFIG mode and press the power button

on the back panel for

one second. The camera emits a beep. When the green light on the front panel switches off, the camera is shut down.

Whenever the camera is expected to be switched off for a long period of time or for transpor-

tation, it is strictly recommended that the backup battery is removed from the EYE-02 camera.

3.2 Wireless Remote Control

The package contains a wireless remote control (RC-86 type), which

can be used to switch between camera modes.

Changing a mode by using the remote control is signaled both by the

LED lights on the camera front panel, and by an acoustic signal.

Remote control

EYE-02.ENG.MAN.User_Manual.24.A

- 6 -

Remote control navigation













3.3 Working Modes

The EYE-02 camera has three main working modes: SLEEP, WATCH and CONFIG.

Mode Description

Button on

the Remote Control

SLEEP

SLEEP mode is the camera's stand-by mode. The camera doesn’t detect

any movement in the targeted area and the major detectors are disabled.

The only active detectors are those that protect the camera itself against an

unwanted manipulation by an intruder.

WATCH

In WATCH mode, the camera guards fully the targeted area and all detectors

are active.

CONFIG

CONFIG mode allows the user to change the camera settings and switch the

camera to other special modes (ENROLL, TEST, USB).

and

together

The chosen camera mode is terminated by switching to a different camera mode. Camera signalizes its current mode

to the user by LED lights and acoustic signals.

Camera Mode LED lights signaling Acoustic signal

WATCH Lights are off.

One long beep

SLEEP Green light is permanently on.

Two long beeps

CONFIG

Red and Green lights blink slowly

together.

Three long beeps

ENROLL

Red and Green lights slowly blink

alternately.

One short beep

ERROR Red light is permanently on

Incorrect operation

with remote control

Four short beeps

Camera is starting

up or shutting down

or USB mode is in

progress

Green light ashes rapidly

3.4 Cong Mode

CONFIG mode allows the user to change the camera’s settings.

To enter CONFIG mode using the remote control, press the

and buttons simultaneously – the red and green

LED lights on the front panel will start to blink slowly together.

From CONFIG mode is possible to switch to other special modes (ENROLL, TEST, REPORT, USB).

1 The Red light goes out when the fault has been resolved or the user has switched mode.

EYE-02.ENG.MAN.User_Manual.24.A

- 7 -

MODE DESCRIPTION COMMAND

ENROLL

In ENROLL mode, the camera allows new external wireless devices to be

enrolled, such as remote controls, detectors, sirens, etc. A new contact phone

number can also be enrolled in this mode, by simply calling the camera.

ENROLL mode is terminated automatically after one new item has been

enrolled.

TEST

TEST mode is a special mode for testing the functionality of all detectors

without causing a number of unwanted alarm reports. The camera beeps and

blinks after any of the sensors is activated.

REPORT

In REPORT mode, the camera sends a special report to all contacts (call,

MMS etc.) according to the camera settings.

Example of an SMS from the camera: Camera EYE-02 reports: User origina-

ted camera test External wireless device RC-80(1), Time:13/11/2008 11:33:49.

press the

and but-

tons simultaneously for about

4 seconds

USB

In this special mode, the camera acts as a standard USB ash disk. It allows

access to les on the SD memory card without a special camera driver being

installed on the PC.

Press the power button

CONFIG mode for 3 seconds

(until camera emits 4 beeps)

To protect the camera, special modes will be closed automatically after a 5-minute time-out and the

camera will return to CONFIG mode.

3.5 Proles

The EYE-02 camera offers a fast and simple way of setting all necessary detector parameters by selecting one

of pre-dened proles. These proles are suitable for most camera applications. If necessary, the prole may be

further adjusted by the user in JabloTool software or via JabloTool web portal available on www.jablotool.com.

• HOME

The HOME prole has been designed for camera installation inside

a building (house, at, ofce). During WATCH mode, there are no move-

ments of people, gusts of wind, signicant temperature changes or loud

noises expected.

• OUTDOOR

The OUTDOOR is suitable for installation of the camera outside your

home. The camera signicantly reduces the sensitivity of the detectors

in OUTDOOR mode because there are many sources which could po-

tentially cause a false triggering of the alarm - sunshine, animals, street

noise, wind, etc.

For outdoor installation see chapter 5.5.

• GARAGE

This prole is suitable for installation inside your garage. It is similar to the

HOME prole. Additionally, the GARAGE prole provides a 30-second

entrance delay. It allows you to open the garage or home entrance door rst

and switch the camera to the SLEEP mode during this delay.

• CARE

The CARE prole has been designed specically for monitoring small chil-

dren and elderly or disabled people.

Using the camera with the CARE prole allows

the user to leave the home, stay a short distance away

from home and watch their sleeping baby or unwell

relative at the same time. The camera is activated by any

movement or by a PANIC alarm (triggered by a personal

wrist button)

The internal acoustic camera signals are disabled in the CARE prole. The CARE prole is the only

prole where the TILT detector is blocked to allow camera manipulation.

EYE-02.ENG.MAN.User_Manual.24.A

- 8 -

• SHOP

The most powerful prole is SHOP. All detectors are active in this mode,

including the permanent activation of "Motion in Picture" detection. This

prole offers the highest quality of permanent monitoring; consequently it is

the prole with the highest energy consumption.

This prole perfectly suited to places which require temporary monitoring,

such as shops, ofce corridors or reception areas, etc.

The default prole is HOME. To switch prole remotely, use your JabloTool account on www.jablotool.com. You can

also use SMS command PROFILE (for details see chapter 4.3)

3.6 Detectors

The EYE-02 camera integrates a wide range of detectors. This sophisticated solution combines various types of

detectors to enable the user to protect the desired area from a wide range of threats. This chapter briey describes

the individual principles for each detector to ensure they are correctly set.

• Infrared motion detector (PIR)

The Infrared motion detector, or Human Body Detector, is the most common type of professional security system detec-

tors. PIR can detect even very small changes in temperature in front of the camera.

Example: Detecting persons by registering changes of temperature emited by human body.

• Motion-In-Picture detector (MIP)

The key principle behind this detector comes from a professional surveillance camera system. It constantly analyzes

the scene and detects any change in the picture.

A sophisticated digital algorithm provides an excellent resistance to false alarms caused by non-essential changes

in pictures (getting dark, switching on the street lamps, etc).

The user can simply mask-out (hide) a part of a picture in order not to detect changes in this part (masking out the

street trafc, etc.) and set the sensitivity according to the size and speed of change in the picture.

As the DSP method consumes a lot of energy, MIP is usually activated after a WAKE-UP by the PIR detector.

Example: Detecting movement of people or objects in a garage.

• Glass break detector (GBS)

The glass break detector digitally analyses a signal from the microphone and is able to detect the characteristic sound

of the window breaking up to 9 meters away.

The GBS sensor can only be used for indoor installations.

• Door opening detector (DOOR)

Door opening detection is a special type of detection that uses acoustic signal ltering. The detector senses pressure

changes and so it detects opening (or closing) of doors and windows in a room.

The DOOR sensor can be only used for indoor installations.

• Tilt detector (TILT)

The built-in tilt detector can detect tampering or unwanted manipulation with the camera. The detector is active also

in SLEEP mode in all proles except CARE.

Example: Detecting intruder who tilted the camera.

• Touch detector (TOUCH)

The touch detector responds to micro vibrations of camera body caused by touching it by hand or another object.

Example: Detecting intruder who touched the camera.

As touch detectors are very sensitive, they should not be used for outdoor installation to pre-

vent false alarms caused by gusts of wind. Reduction in the touch detector's sensitivity may

also be necessary for indoor installation with usual vibrations in some cases.

• Noise detector (NOISE)

The noise detector uses a microphone to check the surrounding area for any sound above the preset level.

The detectors are optimized for application in rooms with a maximum distance of up to 10 meters.

• Detector conguration

Each detector can be congured to 5 sensitivity levels. Higher sensitivity settings mean that detector is activated more

easily, e.g. a smaller movement will be interpreted as activation.

Camera detectors can be congured to respond to their triggering in severral ways. Any of camera detectors can be

set to make alarm always when the detector is triggered or the detector can be set only to wake up the camera for

EYE-02.ENG.MAN.User_Manual.24.A

- 9 -

an adjustable period of time. Then, the following detectors will generate alarm when their sensors are triggered: those

set to make alarm directly and those set to make alarm when camera is woken up. The camera will return into idle

after the WAKE-UP period elapses when no detectors are triggered during this WAKE-UP period.









ALARM













Wake-up mechanism

Create your JabloTool account on www.jablotool.com to congure your detectors remotely.

3.7 Reports & Contacts

The EYE-02 camera can report events to mobile phones (via voice call , text message , MMS ) e-mail

addresses or to the JabloTool server (see chapter 4.1 for more information). Up to 10 different phone numbers and 10

e-mail addresses can be saved in the camera. JabloTool Applications further extend camera benets. The application

Messenger Service enables you to receive SMS, MMS and e-mails directly from JabloTool server with at data tarrif.

http://jablo...

+555123456

Ximuracerumterunteremco in

tuitatusis?terunteremcoin

tuitatusis?

e-mail

Call

SMS

MMS









From:eye-02@...

To:Mr.James

Subject:Alarm

---------------------

Attachments:

Video.avi

From:

+555123456

From:

+555123456

---------

http://jablo

X i m u r a c e r u m

terunterem co

intuitatusis?

+555123456

EYE-02.ENG.MAN.User_Manual.24.A

- 10 -

• Report levels

Each stored contact can have its own report level set. Three levels

(Normal, Extended, All Details) indicate how many events are

reported to the contact.

The extended level of reporting is assigned only to the rst enrolled

contact, all additional contacts are set to normal level.

REPORT LEVELS ALARMS PROBLEMS

STATUS

CHANGES

NORMAL

_ _

EXTENDED

ALL DETAILS

The EYE-02 camera can also report all events to Alarm Receiving Centre run by a security agency. Reports are

created in accordance with international standard communication protocols. Protocol settings will be made by the

authorized ARC service provider once you subscribe to their service.

• Report format

By default, the camera sends an alarm report as an MMS and makes a call to all enrolled contacts. For normal opera-

tion there must be minimum of 1 contact enrolled in the camera.

• Editing contacts

The easiest way of editing contacts is via the JabloTool software. For remote editing of contacts, use the JabloTool

web interface and create account on www.jablotool.com. JabloTool allows you to simply edit the numbers or e-mail

ad-dresses and completely customise what events will be reported at which reporting level.

Alternatively, new telephone contact can be added by calling the EYE-02 camera from the telephone number you

wish to add while the camera is in the ENROLL mode. New contacts can also be added via an SMS command (see

chapter 4.3)

The camera sends e-mails with the reply address noreply@eye-02.info. Please change your e-mail

client SPAM lter to accept e-mails from this address.

Think about who should be sent the alarm information. In the case of remote location, it is useful to

add someone who is physically close to the camera (neighbours, security agency etc.).

3.8 Security settings

It is possible to use two passwords to protect your camera. To set or change the passwords, use JabloTool or SMS

commands (chapter 4.3).

If a password is not used, the camera processes incoming SMS messages only from phone numbers stored in

contacts. Camera always receives calls only from telephone numbers stored in its contact list. (See chapter 4.4. Call

Control)

• Remote Access Password

This password protects you against any unahthorized access to your camera (SMS, JabloTool). It is set to 0000

by default.

If it is used, the camera only processes SMS messages that begin with the password from any phone number.

• Conguration Password

This password protects the camera conguration. (The contacts are not part of the conguration.) This password is

not set by default.

If it is used, the camera only processes SMS messages that begin with the password from any phone number.

The passwords can contain 4-31 characters; the permitted symbols are 0..9, a..z, A..Z. The

passwords are not case sensitive. You can also use JabloTool web interface on www.jablotool.com to

congure your passwords.

EYE-02.ENG.MAN.User_Manual.24.A

- 11 -



4.1 Set-Up and Conguration via PC

The easiest way to control and congure the EYE-02 camera is by using the PC and JabloTool web interface or Jablo-

Tool software application supplied on CD with the camera.

• JabloTool web interface

To access JabloTool via internet , go

to www.jablotool.com and create your account. Step

by step guidance is provided to establish the con-

nection to the camera. You can then fully control and

congure your camera via internet.





EYE-02 connection with JabloTool WEB

• JabloTool Applications

JabloTool Applications are fully integrated into JabloTool account and they further expand the camera benets. Create

your JabloTool account on www.jablotool.com and follow step-by-step guidance to activate the JabloTool Applications.

Access & Back-up

You can access your records anytime without connecting to the camera; your camera records are con-

tinuously backed up on the JabloTool server. Events with video records are reported from the camera

to the server after they occur. Accessing events later on is faster and usually cheaper since it does not

involve GSM data trafc on your camera SIM card.

Picture Link

Extending SMS and emails sent from the camera by private web address enables you to access the

pictures from camera via internet browser by clicking on the link in the message; Access & Back-up has

to be activated to use this application. See picture below.

Messenger Service

Your SMS, MMS messages and emails are sent from JabloTool server instead of being sent directly

from camera. Flat data tariff on your SIM card is sufcient to receive the reports via these channels

because the camera exchanges only data with JabloTool server. Access & Back-up has to be activated

to use this application.

Watch Dog

Camera will be sending regular ”I am alive!”reports in the size of several bytes. The Watch Dog informs

you when it does not receive the regular report from your camera.

Web Camera

Web Camera lets you integrate camera pictures into your website using API publishing interface. You

can adjust which picture will be published. Access & Back-up has to be activated to use this application.

See application note on www.jablocom.com/download for more information.

Live Streaming

Live video streaming is displayed in your JabloTool account on www.jablotool.com. You can access it

anytime via internet. The stream of live pictures is sent as UMTS/GSM data.

Timers

You can congure the camera to switch between its modes at certain time and day in a week. Example:

the camera will switch into WATCH mode every Saturday and Sunday at 10 p.m. and will switch into

SLEEP mode at 6 p.m. Along with this automated setting, users can also change the camera mode

anytime directly as usual.

Flexi Limit

You can set monthly limits to be informed how many SMS, MMS messages and data the camera alrea-

dy sent during the last period. The camera informs you when the limits are exceeded.

Visit www.jablotool.com/applications for more information on JabloTool Applications.

EYE-02.ENG.MAN.User_Manual.24.A

- 12 -

https://www.jablotool.com/

JA/3F6924EZ

https:\\www.jablotool.com\

Access & Back-up

Application

high speed

data

SMS link messages

How the Picture Link works

• Connecting EYE-02 with JabloTool via USB cable

JabloTool can also be accessed as desktop software.

Load the installation CD into your computer and a CD

content wizard launches automatically. Run the le

INSTALL.EXE, follow the instructions and select to

install JabloTool. If the content wizard does not launch,

you can nd the le INSTALL.EXE in the root directory

of the CD. Connect the camera with the PC via a USB

cable after you installed JabloTool.



EYE-02 connection with JabloTool

Do not connect the EYE-02 camera to the USB on your computer until you have nished

installing the JabloTool software from the CD!

Turn the camera on and connect it to the computer via the USB cable. Wait until the operating

system recognizes the camera. Click on the JabloTool icon on the desktop to load the program

and follow the instructions on the screen.

JabloTool

The maximum length of the USB cable is usually 5 meters. If your EYE-02 camera is too far, you may

need to remove it temporarily from its location or bring your PC nearer.

4.2 Control by SMS Commands

Control commands report or change the camera state. They have the form of text message (SMS) commands sent to

the camera.

EYE-02 camera can be controlled from any phone in case it is protected by the Remote Access Password. If you

decide not to protect you camera by the Remote Access Password, you will be able to control the camera only from

phones entered in the list of camera contacts. The camera conrms the control commands with an SMS.

Please note passwords and commands are not case sensitive.

COMMAND DESCRIPTION

WATCH

Switches the EYE-02 camera to WATCH mode.

Structure: <Remote Access Password> WATCH

Example: If the camera remote access is protected by the password MIKE, the command

must be sent as: MIKE WATCH

SLEEP Switches the EYE-02 camera to SLEEP mode.

EYE-02.ENG.MAN.User_Manual.24.A

- 13 -

COMMAND DESCRIPTION

STATUS

The EYE-02 camera will send back an SMS indicating the current camera status.

Structure: <Remote Access Password> STATUS

Example: Camera EYE-02 status: SLEEP mode, Time: 12/10/2011 13:56:31, power: AC, batte-

ry: 100%, gsm: O2-CZ 100%

Camera EYE-02 Name of your camera

SLEEP mode Current camera status

Time:12/11/2009 13:56:31 Time (date) of status report

Power: AC Indicates that camera is powered from AC power.

Battery: 100% Indicates how much the battery is charged.

gsm: O2-CZ 100% Indicates the GSM network and strength of GSM signal.

PICTURE

The EYE-02 camera returns a multimedia message with a picture of the current scene in front of the

camera. The message also contains the current camera status.

Structure: <Remote Access Password> PICTURE

REPORT SMS

The EYE-02 camera sends a report of the 10 latest events. The camera sends up to 5 SMS.

Structure: <Remote Access Password> REPORT SMS

REPORT MMS

The EYE-02 camera sends an MMS with the last alarm event recorded in the camera history.

Structure: <Remote Access Password> REPORT MMS

CREDIT

<USSD>

This command has been designed especially for prepaid SIM cards. The EYE-02 camera will return

a text message with information about the current credit on your SIM card. This function is provided

by your network operator and might not work correctly on some networks.

Structure: <Remote Access Password> CREDIT < USSD command >

Example: MIKE CREDIT *22#

Where MIKE is remote access password and *22# is example of USSD command supported by

operator to nd out the credit balance on prepaid cards. It is different for each network operator.

HELP

The camera sends back a text message with a list of the SMS commands.

Structure: <Remote Access Password> HELP

ON / OFF

DeviceX / DeviceY

If the camera is enrolled to a wireless Device, this command switches its programmable output.

Parameters are ON or OFF. If you would like to make a pulse on the output, send the command ON

<time in seconds>.

Please see the chapter on External Wireless Peripherals.

Structure (for DeviceX): <Remote Access Password> <DeviceX ON/DeviceX OFF/DeviceX ON

time parameter>

Example: MIKE DeviceX OFF ---

Switches OFF DeviceX

The possible actions are ON and OFF only. If DeviceX/DeviceY is set to PULSE mode in JabloTool, it

can be switched ON only. The time parameter is optional. It can be in 01:30:00 or 1h 30m 0s format.

Example: MIKE Sprinkler ON 100s ---

Switches ON Device X named «Sprinkler“ for 100

seconds.

DeviceX and DeviceY can be renamed and operated via JabloTool web interface www.jablotool.com

or via JabloTool software.

4.3 Conguration by SMS Commands

Basic conguration settings of EYE-02 camera can be changed via SMS commands. The camera can be congured

from any phone in case it is protected by Remote Access Password or by Conguration Password. If the camera is

protected by Conguration Password, then SMS commands conguring the camera must begin with this password.

If the Conguration Password is not set and camera is protected only by Remote Access Password, then SMS com-

mands conguring the camera must begin with Remote Access Password.

If you decide not to protect your camera by any of the passwords, you will be able to congure the camera only

from phones entered in the list of camera contacts. The camera conrms conguration commands with an SMS.

COMMAND DESCRIPTION when camera is protected by Conguration Password

CONFIG PROFILE

Prole setting, <prole> is HOME, OUTDOOR, GARAGE, SHOP or CARE

Structure: <Conguration Password> CONFIG PROFILE <Name of requested Prole>

Example: HELEN CONFIG PROFILE HOME

Where HELEN is conguration password. The command switches the camera to the prole

HOME

EYE-02.ENG.MAN.User_Manual.24.A

- 14 -

COMMAND DESCRIPTION when camera is protected by Conguration Password

CONFIG CONTACT

Add a new contact.

Structure: <Conguration Password> CONFIG CONTACT <Contact to be added>

Example1: HELEN CONFIG CONTACT MyEmail@domain.com

The e-mail address myemail@domain.com will be added to the EYE-02 camera contact list,

alarm reports will be sent to this e-mail address including the video records.

Example2: HELEN CONFIG CONTACT +555888770551

The phone number +555888770551 will be added to the EYE-02 camera contact list. alarms

will be reported to this phone number in accordance with default settings via a voice call and

an MMS.

CONFIG LANG

Changes the EYE-02 camera language settings.

The camera sets the language automatically according to the inserted SIM card. If the SIM

card lan-guage is not installed in the camera, text remains in English.

Structure: <Conguration Password> CONFIG LANG <Requested camera language>

Example: HELEN CONFIG LANG GER changes the default language to German.

Possible languages: ENG, GER, SPA, FRE, FIN, SWE, NOR, SQI, ARA, CZE, DAN, GRE,

HRV, HUN, ITA, DUT, POL, POR, RUM, RUS, SLK, SWE, TUR.

For the list of currently installed languages in your camera, send an SMS: <Remote Access

Password> HELP LANG

Example of an answer from the camera: Camera EYE-02 help: LANG ENG, CZE, GER,

SPA, FRE

CONFIG DELAY

Changes the Exit delay timer setting, <time> is time in seconds.

Structure: <Conguration Password> CONFIG DELAY <Requested time in seconds>

Example: HELEN CONFIG DELAY 25

---

Sets the exit delay to 25 seconds

CONFIG DATE

Sets the date and time .

Structure:<Conguration Password>

CONFIG DATE <Requested date and time in YYYY-MM-DD HH:MM:SS format>

Example: HELEN CONFIG DATE 2011-10-24 08:34:02

CONFIG ACCESS

Sets or changes the Remote Access Password.

Structure: <Conguration Password> CONFIG ACCESS <New Remote Access

Password>

Example: CONFIG ACCESS 1234

--- for setting the password 1234 if no Remote Access

Password has been set previously

Example: 1234 CONFIG ACCESS MIKE

---

for changing the password from 1234 to MIKE

CONFIG PASSWORD

Sets or changes the Conguration Password.

Structure: <Conguration Password> CONFIG PASSWORD <New Conguration

Password>

Example: CONFIG PASSWORD 5678 --- for setting the password 5678 if no Conguration

Password has been previously set

Example: 5678 CONFIG PASSWORD HELEN --- for changing the password from 5678 to

HELEN

4.4 Call Control

The EYE-02 camera provides a basic control function when it is called from a user’s phone. When a phone saved in

the contacts calls the EYE-02 camera, the camera answers the call and goes through the basic navigation menu:

• Welcome to the Camera menu:

To listen to the sound from the camera microphone ................................. press 1,

to receive an MMS with a current picture .................................................. press 2,

to receive an MMS with the last alarm record .......................................... press 3,

to receive the latest events history in a text message ............................... press 4,

to switch the camera to  mode ...................................................... press 7,

to switch the camera to  mode ......................................................... press 9.

The user can select a requested action by pushing the appropriate number key on his mobile phone.

EYE-02.ENG.MAN.User_Manual.24.A

- 15 -

4.5 Reset to factory defaults

If necessary, the EYE-02 camera can be RESET to the factory default settings following this guide:

All user settings, contacts and events will be deleted! The memory card will be formatted , Re-

mote Access Password will be set to 0000 and Conguration Password will be erased. Events

and les downloaded into the JabloTool DESKTOP software will remain in the PC.

• Switch off the camera, remove the battery.

• Wait at least 10 seconds.

• Press the power button and while holding it, carry out the following steps.

• Insert the battery.

• Within 10 seconds, connect the AC power adaptor.

• The camera starts emitting fast beeps.

• Wait until the camera makes 3 longer beeps and both LEDs (R+G) start ashing. Release the power button.

• The camera resets and restarts in ENROLL mode.

Reset to factory defaults can be also done by using JabloTool software application.



5.1 Night View

The EYE-02 camera is equipped with a Night View function, which allows infra-red spectrum photos to be taken.

The EYE-02 camera has a built-in infrared LED lamp, which can illuminate the scene by non-visible infrared light.

Although the human eye cannot see this type of light, the camera chip can take a picture using this spectrum.

The infra lamp illumination is activated automatically when a snapshot is requested and the level of ambient light is

too low.

Objects which reect IR light might have unrealistic colours on daytime pictures. The color

most affected is the green of plants (trees, grass) as they reect a high amount of IR light.

Also some parts of black (dark) clothing can look light grey.

The night scene may be overexposed by the IR lamp reecting off objects located close by. In such cases,

the internal IR lamp should be disabled in the camera conguration and an external IR lamp should be

used instead. For more information about IR illumination see application notes on www.jablocom.com/

download .

5.2 Battery

The EYE-02 camera has an internal backup Li-Ion battery, which allows operation to continue if AC power is lost. If

used in any of the predened proles, the backup battery allows the camera to operate for approximately 24 hours.

Any individual sensor conguration may shorten this period accordingly.

In case of active MIP sensor, the backup time may be as short as 40% of the original value. If an IR light is used at the

same time during AC failure, the backup time may drop to 20%.

Please note that each item of network communication will shorten the backup time rapidly, especially if the camera is

operating in an area with poor network coverage. Using the device with a 3G network may also signicantly decrease

battery backup time!

The current state of how much your battery is charged can be checked anytime via JabloTool web

interface www.jablotool.com or by using JabloTool desktop software.

• Battery mode

In certain cases, for example when used in locations where AC power is not available, the duration of battery operati-

on may need to be extended. In such cases, you may use the special BATTERY mode.

When in the BATTERY mode, the EYE-02 camera dramatically reduces its power consumption in WATCH. It logs out

of the GSM network, switches off the short range radio receiver and switches on the motion-in-picture detector only

after a WAKE-UP. This means that the EYE-02 camera, while in the BATTERY mode, cannot be reached by calls or

by SMS commands. Additionally, the external detectors and remote controls cannot be used in BATTERY mode.

The EYE-02 camera keeps all the internal detectors working and reports all events as in NORMAL mode. After an

alarm, the EYE-02 camera switches on the radio and logs onto the GSM network for 2 minutes. It reacts to calls, SMS

commands and remote controls during these 2 minutes only.

A fully charged battery can operate the EYE-02 camera in the BATTERY mode for up to 30 days.

For information on how to power EYE-02 from a solar panel, see application notes

on www.jablocom.com/download

EYE-02.ENG.MAN.User_Manual.24.A

- 16 -

5.3 Micro SD card

The EYE-02 camera is equipped with an SD micro memory card slot allowing further extension of the internal storage

ca-pacity. The EYE-02 camera comes with a 2GB memory card inserted. The length of video records that can be

stored on SD card depends on resolution and quality of picture and on video framerate.

Resolution Image quality Video framerate Length of video on 2GB

SD card

640 x 480 pixels High 2 per second 4 hrs 34 min.

320 x 240 pixels Middle 4 per second 7 hrs 19 min.

160 x 120 pixels Low 4 per second 21 hrs 42 min.

Saving pictures only when a motion is detected substantially extends the length of records. This function is active by

default and it can be deactivated in JabloTool.

JabloTool software application allows you to switch the EYE-02 camera to USB mode in which you can access the

SD card as a standard ash disc from an attached PC. To switch to USB mode, display the device state screen,

switch it to Advanced user mode, choose CONFIG and USB mode.

Other EYE-02 camera functions are blocked when the PC is directly accessing the SD card.

When exploring the SD card, you will nd the following folder structure:

HISTORY This folder contains les with log of event history.

PICTURE

Archive of pictures in JPG format recorded after EVENTS.

(For example: “p0065401.jpg”)

VIDEO

Archive of video records in AVI format recorded after EVENTS.

(For example: “vid01021.avi”)

cong.txt A le with the current conguration of EYE-02 – can be used for backup or to restore the conguration.

The camera keeps free space on the memory card. It automatically deletes the oldest les.

The SD micro memory card also contains some data which is essential to the camera. Please

use JabloTool via USB when replacing the SD card to recover its data structures. Go to

support.jablocom.com for more information.

5.4 External Wireless Peripherals

The EYE-02 camera has a built-in short range radio transceiver, which allows communication with a wide range of

profes-sional security Wireless Peripherals from the OASiS system produced by JABLOTRON ALARMS

(see www.jablotron.com).

Your camera can be extended to provide additional services such as:

• Heating control by a mobile phone. Sirene sounding after alarm

• PANIC button function for elderly or disabled people.

• Operating your domestic appliances via remotely controlled mains socket.

Refer to the table on the inside back cover page of this manual for a brief review of available types of Wireless Peri-

pherals.

Use JabloTool web interface on www.jablotool.com or JabloTool desktop software to enroll a new device. Up to 20

Wireless Peripherals can be enrolled into one camera.

• Remote controls / panic buttons: switch the camera to ENROLL mode, press any button on the remote control.

• Detectors: switch the camera to ENROLL mode, insert the battery into the detector.

• JA-80L Siren: switch the camera to ENROLL mode, plug the siren into the wall socket.

• JA-80A Siren: switch the camera to ENROLL mode, connect the battery to the siren.

• AC-88 Wireless device as mains socket: switch the camera to ENROLL mode, insert the wireless socket into the

mains, activate its enroll regime and select Add new device in JabloTool (tab External devices).

Once the camera is enrolled in the wireless device, you can choose the function of the relay outputs called Devi-

ceX and DeviceY. These can be managed remotely via JabloTool web interface on www.jablotool.com, by using

JabloTool desktop software or by SMS commands .

Example: When you select ON/OFF, you will be able to switch the device ON/OFF. When you select ALARM, the device will be

activated after ALARM event. When you select , the device will be active when camera is in  mode.

EYE-02.ENG.MAN.User_Manual.24.A

- 17 -

Follow the manual supplied with wireless accessories when installing all wireless components. For

more information about Wireless Peripherals see application notes on www.jablocom.com/download

Using JabloTool (www.jablotool.com) is the most convenient way of remotely enrolling external Wire-

less Peripherals to the camera.

5.5 Outdoor Installation

Although the EYE-02 camera housing provides basic humidity resistance, an additional plastic housing is required

when mounted outdoors to protect the camera against rain and snow. If an external housing with a front glass is used,

the internal IR illumination must be switched off and an external IR lamp must be used.

Please visit the www.jablocom.com/download web page to see the detailed application notes about outdoor installa-

tion.



The EYE-02 camera does not require any special maintenance.

• Check the event reporting function via the REPORT command at least once a month.

• Regularly test the basic function of all detectors via theTEST mode.

• Regularly test the remote control battery by pressing any button. If the light on your remote does not switch on,

the battery is discharged and should be replaced. Replace the battery with a new one of the same or equivalent

type.

Remote control - battery replacement procedure

• Once a year, check the camera‘s battery capacity – see chapter 8.1 Battery information.

EYE-02.ENG.MAN.User_Manual.24.A

- 18 -



JABLOCOM will periodically release new versions of the EYE-02 camera software as well as the JabloTool software.

Visit support.jablocom.com to nd the latest version of the EYE-02 camera rmware and supporting software. More

detailed guide to troubleshooting can be found on www.jablocom.com/faq and in Application note on Error messages

displayed by JabloTool available on www.jablocom.com/download.

Problem / Error message Solution

Continuous RED light on

the front camera panel

• Your SIM card is out-of-service or blocked by a PIN code – remove the SIM card from the camera,

put it into your GSM phone and try to make a call or send an SMS. If PIN protected, please disable

the PIN protection.

• Your SIM card is not placed in the SIM holder correctly, or the camera does not support your SIM

card type. Check whether the SIM card is placed in the holder correctly or contact your GSM

service provider.

• The camera location is not covered by a GSM network signal - check the quality of GSM network

signal directly at the place of the camera installation: place your mobile phone close to the camera,

wait a few seconds and read the signal strength from your phone display. If the signal is too low you

might try to replace the original camera GSM antenna by another approved type of GSM antenna

with a higher gain.

• Your SD card is not inserted or it is not inserted properly. Remove and insert the SD card again.

• Camera cannot detect necessary data structures on the SD card. Data structures on the SD card

have been damaged or a new SD card has been inserted into the camera. Connect your camera by

USB cable to the computer and launch JabloTool desktop. JabloTool will ask you whether you wish

to launch update tool to recover the corrupted data structures. Select yes and the update tool will

format the card.

• Battery is not inserted in the camera or it is not inserted properly. Remove and insert the battery

again. Check the battery status in JabloTool.

• If your camera is experiencing other error, please visit the application note

on www.jablocom.com/download where you can nd more information on diagnosing and solving

errors reported by the camera.

The EYE-02 camera does

not react to the

remote control

• Your remote control battery is at – press a button and check whether the light on your control goes

on. If not, replace the remote control internal battery.

• The remote control has been accidentally deleted from the EYE-02 camera conguration. Use the

PC with JabloTool software, open ENROLL mode and press any button on your remote control to

enroll it in the EYE-02 camera.

The EYE-02 camera does

not react to and

buttons on the remote

control.

• The and TEST and CONFIGURATION buttons have been disabled. In JabloTool, go to

Congura-tion, External devices. On the line where your remote control RC-80 is mentioned,

press Congure and enable these buttons.

Pictures and video records

do not have realistic

colours

• The camera is optimized to take pictures also when infra-red illumination is used. That is why

some objects, e.g. leaves on trees, may not have realistic colour. In JabloTool, go to Conguration,

Camera, Advanced image settings to adjust your pictures. Read the chapter 5.1 Night view for more

information.

If you discover abnormal EYE-02 camera behavior, please try to update the EYE-02 camera rmware to the latest

version. To do this, use JabloTool web portal on www.jablotool.com. Go to



You can also use JabloTool software in your PC.

7.1 GSM Network Setting

Sending of data, emails and MMS messages from the camera requires correct setting of some GSM network param-

eters.These parameters depend on the country you live in and on the GSM network you use.

The EYE-02 camera can automatically adjust the correct setting for most GSM networks. If there are some specic

settings for your GSM network provided by your GSM network operator, these can be congured manually using

JabloTool web portal on www.jablotool.com. Go to



. You can also use JabloTool

software in your PC.

Please contact your GSM service provider for detailed parameter settings.

EYE-02.ENG.MAN.User_Manual.24.A

- 19 -



Camera dimensions 155x75x55 mm, 300 g

Package dimensions 300x215x75 mm, 950 g

Extended memory capacity

SD micro card slot, maximum capacity 32 GB, standard Package includes 2 (1) GB SD memory

card

Image resolution VGA (640x480), QVGA (320x240), QQVGA (160x120)

Picture format JPEG, EXIF 2.2

Video format MJPEG

Lens focal length 2.9 mm, view angle 95°

Infra reector 6x Infra LED, 6x 100mW, wavelength 850nm, emitting angle 80°

Infrared motion detector detection range 10m / 140°

MMS support MMS version 1.2 over WAP 2.0

Events history min 100 records in an internal memory + extension to SD card

Operating temperature -20 °C to +55 °C; 25 to 75 % humidity

AC power adaptor 100 - 240 V AC, 50 to 60 Hz, 6 V / 1.67 (2) A DC

Input power (range) 5.0 - 6.7 V / 1 A DC

Back-up battery Li-Ion battery, 1300 mAh

Network connectivity GSM quad band 850/900/1800/1900 MHz for EYE-02

GSM dual band 900/1800 MHz and UMTS dual band 900/2100 MHz for EYE-02 3G

GSM antenna External GSM antenna , SMA connector

Data connectivity EDGE class 10: max. 180 kbps DL / 120 kbps UL, GPRS class 10: max. 85.6 kbps, CS1-4

UMTS PS rate – 384 kbps DL / 384 kbps UL, UMTS CS rate –

64 kbps DL / 64 kbps UL for EYE-02 3G only

Audio parameters AGC and Noise reduction system, HR, FR, EFR and AMR audio codec

Audio monitoring Built-in high sensitivity omni-directional microphone with DSP processing

PC connectivity USB port 2.0

Internal alarm detectors

Motion-in-Picture detector, PIR motion detector, Glass break detector, Acoustic noise detector,

Tilt

and vibration detector

Short range radio 868 MHz, Operated according to ERC REC 70-03

Remote control type RC- 86

Alkaline battery type L1016 (6.0 V), Typical battery lifetime approx. 3 years

Complies with ETSI EN 300220,EN 55022, EN 50134-2,EN50130-4, EN60950-1

8.1 Battery Information

Battery service life

The camera is powered by an AC adaptor and has a backup rechargeable battery. The battery provides power to the camera when the AC

power fails.

The battery gradually decreases its capacity during its lifetime.

The capacity of the battery should be tested at least once a year: disconnect the AC power adaptor and measure the time until camera

announces the battery low state. Replace the battery if the time is shorter than 10 hours for predened proles. See chapter 5.2 if you

use customised proles. Always switch off the camera before replacing the battery!

Using the device with a 3G network can signicantly decrease battery backup time!

Temperature Issues

To reach the optimum parameters the battery should be kept in an environment between 5°C and 35°C.

Exposing the battery to extremely cold or hot temperature will reduce the battery capacity and service life.

The performance of the battery is particularly limited in temperatures below 0 °C. The backup time will shorten signicantly and also

charging will take longer.

At temperatures of -20°C, the backup time can drop down to 6 hours (for predened proles), and even less if settings with higher power

consumption are used (MIP active, IR LEDs on, ...)

Only use the battery and power adaptor for its intended purpose.

Never use a damaged adaptor or battery.

Do not short circuit the battery. Accidental short circuiting can occur when a metal object such as a coin, clip

or pen connects the battery contacts. Short circuiting may damage the battery or the connecting object; it may

even cause a re.

Never expose the battery to a temperature outside of the operating temperature range of -20 °C to +55 °C.

A device with a hot or cold battery may temporarily fail to work, even when the battery is fully charged.

A battery’s performance is particularly limited in temperatures well below freezing.

Do not dispose of the batteries by placing them into a re as they may explode. Batteries may also explode

if damaged.

Your camera may become warm during charging and during normal use. The camera is designed to be permanently

Dispose of the batteries in accordance with local regulations – please recycle when possible and do not dispose

of them as household waste.

Do not dismantle or shred cells or batteries. In case of a battery leak, do not allow the liquid to come in contact

with the skin or eyes. If this occurs, rinse the affected area thoroughly with plenty of water and seek medical advice.

1 May vary depending on the production series.

2 Possible to use Nokia BLC-2 battery.

EYE-02.ENG.MAN.User_Manual.24.A

- 20 -

8.2 Warranty

JABLOCOM s.r.o. hereby declares that this EYE-02 GSM camera is in compliance with the essential requirements

and other relevant provisions of Directive 1999/5/EC.

The original conformity assessment document can be found at the web site www.jablocom.com.

RF Exposure - Specic Absorption Rate (SAR):

This product is designed not to exceed the limits for exposure to radio waves recommended by international guidelines developed by the

independent scientic organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of

age and health. The guidelines use a unit of measurement known as the Specic Absorption Rate, or SAR. The SAR limit for Wireless

Peripherals is 2 W/kg and the highest SAR value for this camera when tested complied with this limit.

This product is in compliance with the basic restrictions as specied in the European Council Recommendation [1999 519 EC] for the

measured GSM 850, GSM 900, GSM 1800, GSM 1900, UMTS 900 and UMTS 2100 standards.

Regulatory information:

This camera is only intended for use in the country in which it was sold.

Limited warranty:

Subject to the conditions of this Limited warranty JABLOCOM s.r.o. guarantees this product to be free from defects in design, material

and workmanship at the time of its original purchase by a customer and for a subsequent minimal warranty period under the national

legislation in force. Should your product need warranty service, please return it to the dealer from whom it was purchased. The defects

will be remedied free of charge by repairing or, at our discretion, replacing the device.

Warranty conditions:

If you wish to make a claim under the warranty, please return the Product with all accessories in the original packaging to your dealer.

The warranty is valid only if the original receipt issued to the original purchaser by the dealer, specifying the date of purchase and the

IMEI corresponding with the Product, is presented with the Product to be repaired or replaced. Plastic parts, cables or accessories

belonging to the Product must not be visibly damaged, the Product must not show signs of contact with liquid, the warranty seal must not

be broken and the fault must be described.

This warranty does not cover any malfunction of the Product due to misuse, including but not limited to use outside of its normal and

intended purpose, in accordance with instructions for use and maintenance of the Product. Nor does this warranty cover any malfunction

of the product due to accident, modication, adjustment, improper repair or acts of God.

This warranty does not apply to consumable components with a limited service life, such as batteries or accessories. It also does not

apply to modules from other suppliers, such as SIM cards from the GSM provider.

The warranty provided does not affect the consumer’s statutory rights under the applicable national legislation in force, or the consu-

mer’s rights against the dealer arising from their sales/purchase contract.

Under no circumstances shall JABLOCOM be responsible for any loss of data or income or any special, incidental, consequential or indi-

rect damages howsoever caused.

As the product is under continuous development, JABLOCOM reserves the right to make changes and improvements to any of the pro-

ducts described in this document without prior notice.

Some operations and features are dependent on the SIM card and/or network.

8.3 Safety Instructions

Read these guidelines. Failure to following them may be dangerous and/or illegal.

You have sole responsibility for how you use your device and any consequences of its use. Do not switch the device on in any area

where the use of a wireless device is prohibited or when it may cause interference or danger.

Small Children

Do not leave your device and its accessories within the reach of small children or allow them to play with it. They could hurt themselves

or others, or could accidentally damage the device. Your device contains small parts with sharp edges that may cause an injury or which

could become detached and create a choking hazard.

Some countries may regulate the use of security cameras by special laws. Please study any possible legal restrictions in the country

of use before installing the camera.

Interference

Your device contains a transmitter and a receiver. When it is ON, it receives and transmits RF energy. Care must be taken when using

the device in close proximity to personal medical devices, such as pacemakers and hearing aids. All Wireless Peripherals are suscepti-

ble to interference, which could affect performance.

We (JABLOCOM) are not responsible for any radio or TV interference caused by unauthorized modications to this equipment. Such

modications could void the user’s authority to operate the equipment.

Your device is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines

were developed by the independent scientic organization ICNIRP and include safety margins designed to assure the protection of all

persons, regardless of their age and health.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructi-

ons, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a parti-

cular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the distance between the equipment and receiver.

- Connect the equipment to an outlet on a different circuit to the one to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Pacemakers

Pacemaker manufacturers recommend that a minimum distance of 20 cm to be maintained between a mobile device and a pacemaker to

avoid potential interference with the pacemaker. To ensure this, always use the device body at a distance of more than 20 cm from your

pacemaker.

Sivu latautuu ...

Jablocom EYE-02 Ohjekirja

Brändi: Jablocom

Malli: EYE-02

Tyyppi: Ohjekirja

Lataa PDF

raportti

muilla kielillä

English: Jablocom EYE-02 User manual
Deutsch: Jablocom EYE-02 Benutzerhandbuch
français: Jablocom EYE-02 Manuel utilisateur
español: Jablocom EYE-02 Manual de usuario

Jablocom EYE-02 Ohjekirja

Jablocom EYE-02 Ohjekirja

muilla kielillä

Liittyvät paperit

Muut asiakirjat