CYBEX Cloud Q Ohjekirja

Kategoria
Car seat
Tyyppi
Ohjekirja
ENSENODKFISIHR
CLOUD Q
instruction manual
ECE R-44/04, Gr. 0+, 0-13kg (ca. 0-18M)
2
DK – ADVARSEL! Denne korte vejledning giver et hurtigt overblik. Du bør læse hele vejledningen grundigt, for at opnå
maksimal beskyttelse og komfort for dit barn. Indhold: brugen af babyautostolen - spænd barn fast - installation i bilen.
SE – VARNING! Följande korta instruktioner är endast avsedda att ge en överblick. För att uppnå maximal säkerhet och
komfort för ditt barn är det absolut nödvändigt att du läser hela bruksanvisningen noggrant. Ordning av uppgiftar ställa in
bilbarnstolen - spänna fast barnet - montera bilbarnstolen i bilen.
SI – OPOZORILO! Ta kratka navodila služijo le za hiter pregled. Za maksimalno zaščito in udobje vašega malčka pa
je izjemno pomembno, da skrbno preberete celotna navodila. Pravilno zaporedje: namestitev otroškega sedeža –
pripenjanje malčka – montaža otroškega avto sedeža v vozilo.
HR – UPOZORENJE! Naredne kratke upute služe samo kao pregled. Za postizanje maksimalne sigurnosti i udobnosti
vašeg djeteta, nužno je pažljivo pročitati sve upute u priručniku. Redoslijed zadataka: postavljanje sjedalice za dijete -
vezanje djeteta - postavljanje sjedalice u vozilo.
NO – ADVARSEL! Denne korte vejledning giver et hurtigt overblik. Du bør læse hele vejledningen grundigt, for at opnå
maksimal beskyttelse og komfort for dit barn. Indhold: brugen af babyautostolen - spænd barn fast - installation i bilen.
EN – WARNING! The following brief instructions are only intended to provide an overview. In order to achieve maximum
security and comfort for your child it is absolutely imperative that you read the whole instruction manual carefully. Order of
tasks: set up infant car seat - strap child in - install infant car seat in vehicle.
FI – VAROITUS ! Seuraavan lyhyen käyttöohjeen tarkoituksena on antaa yleiskatsaus. Jotta lapsesi saisi parhaan
turvallisuuden ja mukavuuden, on erittäin tärkeää, että luet koko käyttöohjeen huolellisesti. Tehtäväjärjestys:
Turvakaukalon käyttöönotto - lapsen kiinnitys kaukaloon - kaukalon asennus autoon.
3
5 | CONTENTS
7
6
4 5
3
2
ENSENO
30 | INNEHÅLL
31 |INNHOLD
31 | INDHOLD
76 | SISÄLLYS
77 | VSEBINA
77 | SADRŽAJ
DKFISIHR
Lyhyt käyttöohje
Kratka navodila
Kratke upute
Korta instruktioner
Kort vejledning
Kort vejledning
Brief instructions
CLICK!
9
8
1
A
C
B
E
F
D
4
Homologation
CYBEX CLOUD Q – infant car seat
ECE R44/04 age group 0+
weight: 0 to 13kg
age: from birth up to approx. 18
months
Only suitable for vehicle seats with a
three-point automatic belt, approved
under ECE regulation no. R16 or
equivalent standard
11/2014
Thank you for buying the CYBEX CLOUD Q. We can
assure you that safety, comfort and ease of use were our
highest priorities when developing the CYBEX CLOUD
Q. This product is manufactured under exceptional quality
control and meets the strictest safety requirements.
CLOUD Q
WARNING! In order to keep your child properly
protected it is absolutely essential that you use the
CYBEX CLOUD Q as described in this manual.
!
WARNING! The three-point belt must only be
passed through the designated guides. The belt
guides are described in detail in this manual and
additionally marked in blue on the infant car seat.
!
NOTE! Always keep this Instruction Manual at hand in the
compartment on the underside of the CYBEX CLOUD Q
that has been provided for that purpose.
NOTE! Due to country-specic requirements (e.g. colour
labelling on the infant car seat), product features may
vary in their external appearance. However, this does not
affect the correct functioning of the product.
DEAR CUSTOMER,
CLOUD Q
SEMI-UNIVERSAL
UNIVERSAL
- 13 kg
04301316
ECE R 44/04
Approved for CYBEX
Base Q-fix
CYBEX GmbH
Riedinger Str. 18, 95448 Bayreuth
Germany
5
EN
EN
BRIEF INSTRUCTIONS ................................................................................3
HOMOLOGATION ..........................................................................................4
USE IN VEHICLE ............................................................................................ 6
PROTECTING YOUR VEHICLE .................................................................. 7
ADJUSTING THE CARRYING HANDLE ....................................................8
ADJUSTING THE HEADREST.....................................................................9
STRAPPING IN WITH THE BELT SYSTEM ..............................................9
SAFETY FOR YOUR BABY ........................................................................11
SAFETY WHEN INSTALLING IN VEHICLE .............................................12
INSTALLATION IN CAR ...............................................................................13
ADJUSTING THE SIDE PROTECTOR ..................................................... 15
REMOVAL FROM THE VEHICLE .............................................................. 16
CORRECT SECURING OF YOUR BABY ................................................16
CORRECT INSTALLATION OF THE INFANT CAR SEAT ..................... 17
OPENING THE SUN CANOPY ..................................................................18
ADJUSTING THE RECLINING POSITION ..............................................18
CYBEX TRAVEL SYSTEM .......................................................................... 19
REMOVAL ......................................................................................................19
CARE ..............................................................................................................20
WHAT TO DO AFTER AN ACCIDENT ......................................................20
CLEANING .....................................................................................................22
REMOVING THE COVER ........................................................................... 23
ATTACHING THE COVER ..........................................................................23
PRODUCT LIFESPAN .................................................................................24
WASTE SEPARATION ................................................................................. 25
PRODUCT INFORMATION.........................................................................25
GUARANTEE CONDITIONS ...................................................................... 26
CONTENTS
6
WARNING! No modications or additions may be
made to the CYBEX CLOUD Q without the approval
of CYBEX GmbH. Repairs may only be undertaken
by persons who have been authorised to do so. In
doing so, they must always use original components
and accessory parts only. If not, the infant car seat’s
protective function is no longer guaranteed.
WARNING! Do not use the infant car seat on a seat
on which a front airbag is activated. This does not
apply to so-called side airbags.
WARNING! The infant car seat only offers the
best possible protection when exactly following the
instructions given in this manual.
USE IN VEHICLE
NOTE! The large-volume front airbag expands
explosively and may cause your child serious injury or
even death.
NOTE! If the infant car seat is placed on the vehicle seat
in a way that is not stable or at too steep an angle, it
can be adjusted with an additional blanket. Alternatively,
choose another seat in the vehicle..
7
EN
WARNING! NEVER hold a baby on your lap in a
car. The forces released in a collision are way too
high for any person to hold on to the baby. Never
secure yourself and the child with only one seatbelt.
PROTECTING YOUR VEHICLE
Traces of use and/or discolouration can appear on some
infant car seats made from delicate materials (e.g. velour,
leather etc.) if child seats are used. You can avoid this
by putting, e.g., a blanket or towel underneath the child
seat. In this context, also see our cleaning directions. It
is essential that these are followed before rst use of the
infant car seat.
8
a
a
b
WARNING! Always strap your child in with the
integrated belt system.
WARNING! In order to prevent the seat from tipping
over during carrying, check whether the carrying
handle is locked in place in carrying position C.
ADJUSTING THE CARRYING HANDLE
You can lock the carrying handle in place in six positions:
A: vehicle position
C: carrying position
B+D+E: for putting your baby inside
F: for setting the infant car seat down safely on a
level surface outside the vehicle
To adjust the carrying handle, simultaneously press the
left and right buttons (b).
Then pivot carrying handle a forwards or backwards
while pressing button (b), until it automatically locks in
place in the desired position.
C
B
A
E
F
D
9
EN
e
c
v
g
As an additional element for ensuring correct t, the
CYBEX CLOUD Q is equipped with a seat reducer,
which must be removed before the height of the
headrest is adjusted for the rst time.
The headrest must be adjusted so that max. two
ngers’ breadth or less remains free between the child’s
shoulder and the headrest.
Pull up adjustment tab (v) on the top of the headrest
and move the headrest into the desired position.
Loosen shoulder belts (c) by pressing the adjustment
button on central adjuster (g) and simultaneously pulling
both shoulder belts up.
Undo the belt buckle by pressing red button (e) rmly.
ADJUSTING THE HEADREST
STRAPPING IN WITH THE BELT SYSTEM
NOTE! The headrest only ensures the best possible
protection for your child if it is adjusted to the optimum
height. There are eleven height positions that can be set.
NOTE! Ensure that the infant car seat is free from toys
and hard objects.
NOTE! Ensure that the headrest is correctly locked in
place before using the seat.
NOTE! The shoulder belts (c) are rmly connected to the
headrest and must not be adjusted separately.
10
t
d
c
e
NOTE! Please always pull on shoulder belt (c) and not on
belt pads (d).
NOTE! Ensure that shoulder belts (c) are not twisted.
Put your child into the child seat.
Place shoulder belt (c) directly over your child’s
shoulders.
Place both buckle tongues together and lock them in
place in belt buckle (e) with an audible “CLICK”.
Pull cautiously on central adjustment belt (g) in order to
tighten shoulder belts (c) until they t your child’s body.
NOTE! For CYBEX CLOUD Q to offer optimum
protection, shoulder belts (c) should t the body as
closely as possible.
11
EN
WARNING! The plastic parts of the infant car seat
heat up in the sun. Your baby can suffer burns from
this. Protect your baby and the infant car seat from
intense sun exposure (e.g. by placing a light cloth
over the seat).
NOTE! Always strap your baby into the infant car seat
and never lose sight of your baby if you put him or her
down on a raised surface (e.g. changing unit, table,
bench, armchair…) while in the baby infant car seat.
Take your baby out of the infant car seat as often as
possible in order to relieve pressure from his or her
spine.
Take breaks on longer car journeys for this purpose.
Also ensure that you do not leave your child for too long
in the infant car seat even when not in the car.
WARNING! Please never leave your child unattended in
a vehicle.
SAFETY FOR YOUR BABY
12
q
k
WARNING! Do not use the infant car seat on a seat
with an activated front seat airbag. This does not
apply to so-called side airbags.
WARNING! The infant car seat must always be
secured with the vehicle seatbelt, even when not
being used. In the event of an emergency stop or
a minor collision, an unsecured infant car seat can
injure other passengers and yourself.
WARNING! The vehicle belt buckle (q) must under
no circumstances reach into the lower lap belt
guide (k). If the belt stalk is too long, the infant
car seat is not suitable for use in this position in
the vehicle. In case of doubt, please contact the
manufacturer of your vehicle.
In order to protect all passengers, ensure that…
the infant car seats’ folding backrests are locked in
place and in an upright position
if installing the infant car seat on the passenger seat,
that this is in its rearmost position
all unsecured objects in the vehicle are secured
all persons in the vehicle are strapped in
SAFETY WHEN INSTALLING IN VEHICLE
13
EN
p
a
q
m
WARNING! The seat is not suitable for use with a
two-point or lap seatbelt. Securing with a two-point
seatbelt could result in serious or fatal injuries to the
child in the event of an accident.
Place the infant car seat facing the rear of the vehicle
on the vehicle seat (the child’s feet point towards to the
backrest of the vehicle seat).
INSTALLATION IN CAR
Ensure that the installation mark on warning sticker (p),
located on the side of the seat, is aligned with the oor
of the vehicle.
Also check that the infant car seat is in the sitting
position and that belt guide (m) is unlocked.
Pull out the vehicle seatbelt and route it over the infant
car seat.
Lock the buckle tongue in place in vehicle seatbelt (q).
NOTE! The CYBEX CLOUD Q can be used on all seats
with three-point automatic belts. We recommend as a rule
that the seat is used in the rear of the vehicle. In most
cases, your child is exposed to higher risk in the front.
14
m
k
l
q
WARNING! It may be that buckle part (q) of the
car seatbelt is too long so that is reaches the blue
belt guides of the infant car seat. This means that
the infant car seat cannot be fastened tightly. If this
is the case, choose another seat in the car for the
infant car seat.
Place the lap belt (k) into blue belt guides (m) on both
sides of the infant car seat.
Tighten lap belt (k) by pulling on diagonal belt (l) in the
direction of the front of the vehicle.
Pull diagonal belt (l) behind the head end of the infant
car seat.
Route diagonal belt (l) through the rear blue belt guide
(n) and ensure the belt is placed above the L.S.P.
Tighten diagonal belt (l).
NOTE! Do not twist the vehicle seatbelt while doing this.
NOTE! Diagonal belt (l) must be routed through rear, blue
belt guide (n) and above the unfolded telescopic Linear
Side-impact Protector (L.S.P.).
NOTE! The infant car seat must not be used in the
reclining position in a vehicle. In order to ensure this, the
belt guide is automatically locked as soon as the seat is
put into the reclining position.
Now swing the carrying handle (a) with both buttons (b)
pressed, into the vehicle position A (see page 8)
a
n
l
b
15
EN
f
CLICK!
WARNING! The folded out Linear Side-impact
Protector (L.S.P.) does not function as a handle or
for fastening the infant car seat.
NOTE! If installing the infant car seat on a middle seat,
you must not fold out either Linear Side-impact Protectors
(L.S.P.).
NOTE! Ensure that the extendable part locks in place.
You will hear a „CLICK“ when it is locked.
ADJUSTING THE SIDE PROTECTOR
The “Linear Side-impact Protector” (L.S.P.) is built into the
CYBEX CLOUD Q. This system enhances the safety of
your child in the event of a side crash. In order to achieve
the best possible protective effect, fold the L.S.P. out as
far as possible towards the car door closest to the infant
car seat.
The L.S.P. has two positions. If the L.S.P. touches the
inside of the car door when in its outermost position,
you must use the intermediate position. To do so, you
rst have to unfold the L.S.P. completely. Then press
unlocking button (f) and push the L.S.P. back into the
intermediate position.
The L.S.P. can be completely pushed back into the seat
if you press unlocking button (f) at the same time as
moving the folded out part towards the seat with a gentle
pressure.
16
c
t
e
m
n
k
CORRECT SECURING OF YOUR BABY
To ensure your baby’s safety, check that:
shoulder belt (c) ts the baby’s body closely without
constricting the baby and the belt is not twisted.
the position of the headrest is correctly adjusted
buckle tongues (t) are locked in place in belt buckle (e).
Take the diagonal belt out of rear, blue belt guide (n).
Undo the car seatbelt buckle and take lap belt (k) out of
belt guide (m).
REMOVAL FROM THE VEHICLE
By pressing the release button (f) you can push the
Linear Side-impact Protector (L.S.P.) back into the seat.
PLEASE NOTE: In order to protect both your vehicle
and the infant car seat, the Linear Side-impact Protector
(L.S.P.) must be pushed back into the seat before taking
the seat out.
17
EN
NOTE! The infant car seat may only be used on a front-
facing seat that has been tted with a three-point safety
belt and is approved under ECE R16.
the infant car seat is secured with the child facing
the rear of the car (the child’s feet point towards the
backrest of the vehicle seat)
the infant car seat is only used on the front passenger
seat if there is no front airbag that can impact on the
infant car seat.
the CYBEX CLOUD Q is fastened with a three-point
automatic infant car seat belt
lap belt (k) runs through the two blue belt guides (m) on
both sides of the infant car seat
diagonal belt (l) runs through blue belt guide (n) on the
backrest of the infant car seat
car seatbelt buckle (q) is not touching blue belt guide
(m)
the car seatbelt is taut and not twisted
the infant car seat is leveled (see marking) in the
vehicle and in the sitting position with the belt guide
unlocked
the L.S.P. has been unfolded as far as possible on the
side nearest to the car door, in order to achieve the best
possible protective effect.
CORRECT INSTALLATION OF THE INFANT CAR SEAT
To ensure your baby’s safety, check that:
m
m
q
18
1
2
3
4
o
CLICK!
m
OPENING THE SUN CANOPY
ADJUSTING THE RECLINING POSITION
Unfold the sun canopy by pulling gradually on the plastic
cover. To fold up, push the sun canopy back to its starting
position.
The CYBEX CLOUD Q can be put into the reclining
position by pressing the release button (o) at the same
time as pushing the back section down.
Ensure that the seat has been correctly locked in place in
the reclining position.
The position is permitted exclusively for use outside of the
vehicle, for example on a stroller, and must not be used in
a vehicle under any circumstances.
For safety purposes, belt guide (m) locks automatically if
the seat is put into the reclining position.
To get back to the sitting position, press the unlocking
button while pulling the back section up until you hear the
lock “CLICK”.
NOTE! Do not undertake any adjustments to the seat set-
up while the vehicle is in motion.
WARNING! The CYBEX CLOUD Q must only be reclined
outside of the vehicle.
19
EN
s
CLICK!
To unlock, press and hold both unlocking buttons (s) on
the infant car seat and lift the seat up.
CYBEX TRAVEL SYSTEM
Follow the instruction manual for your stroller!
You can attach the Cloud Q on any approved CYBEX
or other brand stroller. Click the infant car seat onto the
approved adapter with the child looking towards the
parent. Make sure the infant car seats audibly locks in
place on both sides.
Always check that the infant car seat is rmly connected
to the stroller.
REMOVAL
20
An accident can cause damage to the CYBEX CLOUD Q
that is not visible to the naked eye. Please exchange the
seat without fail after an accident. In case of doubt please
contact the retailer or manufacturer.
CARE
WHAT TO DO AFTER AN ACCIDENT
In order to ensure that your infant car seat provides
the maximum protective effect you must observe the
following:
All important parts of the infant car seat should be
checked regularly for damage so that all mechanical
components function without problems.
It is absolutely essential to ensure that the infant car
seat is not jammed between hard objects such as
vehicle doors, seat rails etc., because this can lead to
damage.
After exposure to massive forces (e.g. after a collision),
it is essential that the infant car seat is checked by the
manufacturer.
NOTE! It is advisable to buy an additional cover on
purchasing a CYBEX CLOUD Q so that the CYBEX
CLOUD Q can continue to be used even when the cover
is being washed and dried.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120

CYBEX Cloud Q Ohjekirja

Kategoria
Car seat
Tyyppi
Ohjekirja