Samsung PS58B855Y1W Ohjekirja

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

Model Serial No.

BN68-02196A-00

Plasma TV

user manual

Contact SAMSUNG WORLD-WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

Customer Care Centre 

Web Site

AUSTRIA 0810 - SAMSUNG(7267864, € 0.07/min) www.samsung.com/at

BELGIUM 02 201 2418 www.samsung.com/be

CZECH REPUBLIC

800 - SAMSUNG (800-726786) www.samsung.com/cz

Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8

DENMARK 8 - SAMSUNG(7267864) www.samsung.com/dk

EIRE 0818 717 100 www.samsung.com/ie

ESTONIA 800-7267 www.samsung.ee

FINLAND

30 - 6227 515

www.samsung.com/fi

FRANCE

3260 'dites' SAMSUNG (€ 0,15/Min)

0825 08 65 65 (€ 0.15/Min)

www.samsung.com/fr

GERMANY 01805 - SAMSUNG(7267864, € 0.14/Min) www.samsung.de

HUNGARY 06 - 80 - SAMSUNG(7267864) www.samsung.com/hu

ITALIA 800 - SAMSUNG(7267864) www.samsung.com/it

KAZAKHSTAN 8-10-800-500-55-500 www.samsung.com/kz_ru

KYRGYZSTAN 00-800-500-55-500

LATVIA 8000-7267 www.samsung.com/lv

LITHUANIA 8-800-77777 www.samsung.lt

LUXEMBURG 02 261 03 710 www.samsung.com/lu

NETHERLANDS 0900 - SAMSUNG(7267864, € 0.10/Min) www.samsung.com/nl

NORWAY 3 - SAMSUNG(7267864) www.samsung.com/no

POLAND

0 - 801 - 1SAMSUNG(172678)

022 - 607 - 93 - 33

www.samsung.com/pl

PORTUGAL 808 20 - SAMSUNG(7267864) www.samsung.com/pt

RUSSIA 8-800-555-55-55 www.samsung.ru

SLOVAKIA 0800 - SAMSUNG(7267864) www.samsung.com/sk

SPAIN 902 - 1 - SAMSUNG (902 172 678) www.samsung.com/es

SWEDEN 075 - SAMSUNG(726 78 64) www.samsung.com/se

SWITZERLAND 0848 - SAMSUNG(7267864, CHF 0.08/min) www.samsung.com/ch

TADJIKISTAN 8-10-800-500-55-500

TURKEY 444 77 11 www.samsung.com/tr

U.K 0845 SAMSUNG(7267864) www.samsung.com/uk

UKRAINE 8-800-502-0000 www.samsung.ua

UZBEKISTAN 8-10-800-500-55-500 www.samsung.com/kz_ru

BN68-02196A-Eng.indb 1 2009-04-09 오후 4:12:15

Sivu latautuu ...

English - 4

Checking Parts

Owner’s Instructions Remote Control/

AAA Batteries (2ea)

Program CD

Cloth-Clean Holder-Ring (4ea)

(Refer to page 80)

Warranty Card/

Safety Guide Manual

(Not available in all

locations)

Cover-Bottom

(PS50B855 only)

Screws (5ea)

(PS50B855 only)

Cover-Bottom/Screw

(PS58B855 only)

Holder-Wire stand

(Refer to page 82)

Holder-Wire (3ea)

(Refer to page 82)

Ext Cable

AV Cable Component Cable Holder-Wire Cable

(Refer to page 83)

Ferrite Core (4ea)

Ferrite Core

The ferrite cores are used to shield the cables from interference.

When connecting a cable, open the ferrite core and clip it around

the cable near the plug.

N

Connecting and Preparing Your TV

Using the Stand-Base

Two or more people should carry the PDP. Never lay the PDP on the oor

because of possible damage to the screen. Always keep the PDP upright.

The PDP can rotate 20 degrees in right and left directions.

N

How to assemble the Stand-Base (depending on the model)

Using the 5 screws for securing the stand base and the TV, firmly attach the TV

to the stand base.

(The exterior of the set may be different than the picture.)

In case of installing your TV on the wall, close the

cover (1) on the stand-base connection part using

two screws for hiding.

Warning

Firmly secure the stand to the TV before moving

it, as the stand may fall and could cause serious

injury.

Two or more people should carry the TV.

Never lay the TV on the oor because of

possible damage to the screen.

Always store the TV upright.

N

Power Cord (2ea) LAN Cable

(1ea)

HDMI Cable

(1ea)

-20° ~ 20°

BN68-02196A-Eng.indb 4 2009-04-09 오후 4:12:23

Sivu latautuu ...

English - 6

Viewing the Connection Panel

TV Rear Panel

Whenever you connect an audio or video system to your set, ensure that all elements are switched off.

When connecting an external device, match the colour of the connection terminal to the cable.

N

The product colour and shape may vary depending on the model.

N

987

Cable Television

Network

or

0

4 53

@



4

2

or

!

6

1

BN68-02196A-Eng.indb 6 2009-04-09 오후 4:12:28

Sivu latautuu ...

English - 10

Viewing the Menus

1. With the power on, press the MENU button. The main menu appears on the

screen. The menu’s left side has icons: Picture, Sound, Channel, Setup, Input,

Application, Support.

2. Press the ▲ or ▼ button to select one of the icons. Then press the ENTER

E

button to access the icon’s sub-menu.

3. Press the EXIT button to exit.

The on-screen menus disappear from the screen after about one minute.

Using the TOOLS Button

You can use the TOOLS button to select your frequently used functions quickly and

easily. The Tools menu changes depending on which external input mode you are

viewing.

1. Press the TOOLS button. The Tools menu will appear.

2. Press the ▲ or ▼ button to select a menu, then press the ENTER

E

button.

3. Press the ▲ / ▼ / ◄ / ► / ENTER

E

buttons to display, change, or use the selected

items. For a more detailed description of each function, refer to the corresponding page.

Anynet

+

(HDMI-CEC), see page 55

Picture Size, see page 18

Picture Mode, see page 17

Sound Mode, see page 22

Sleep Timer, see page 24

SRS TS HD, see page 22

Energy Saving, see page 26

Dual l ll, see page 23

Add to Favourite (or Delete from Favourite), see page 15

PIP, see page 27

Auto Adjustment, see page 20

•

N

Tools

Anynet+ (HDMI-CEC)

Picture Size : Auto Wide

Picture Mode : Standard

Sound Mode : Custom

Sleep Timer : Off

SRS TS HD : Off

Energy Saving : Off

Dual l ll : Mono

Add to Favourite

U

Move

E

Enter

e

Exit

Mode

:

Standard

Cell Light : 4

Contrast : 95

Brightness : 45

Sharpness : 50

Colour : 50

Tint (G/R) : G50/R50

Advanced Settings

Picture

BN68-02196A-Eng.indb 10 2009-04-09 오후 4:12:30

Sivu latautuu ...

English - 21

PC Display

Setting Up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. The actual

screens on your PC will probably be different, depending upon your particular version

of Windows and your particular video card. However, even if your actual screens

look different, the same basic set-up information will apply in almost all cases. (If not,

contact your computer manufacturer or Samsung Dealer.)

1. First, click on ‘Control Panel’ on the Windows start menu.

2. When the control panel window appears, click on ‘Appearance and Themes’ and a

display dialog-box will appear.

3. When the control panel window appears, click on ‘Display’ and a display dialog-box

will appear.

4. Navigate to the ‘Settings’ tab on the display dialog-box.

The correct size setting (resolution)

Optimum: 1920 X 1080 pixels

If a vertical-frequency option exists on your display settings dialog box, the correct

value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.

Display Modes

Both screen position and size will vary depending on the type of PC monitor and its resolution.

The resolutions in the table are recommended.

When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.

The interlace mode is not supported.

The set might operate abnormally if a non-standard video format is selected.

Separate and Composite modes are supported. SOG is not supported.

Too long or low quality VGA cable can cause picture noise at high resolution modes (1920x1080).

D-Sub and HDMI/DVI Input

Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H/V)

IBM

640 x 350 31.469 70.086 25.175 + / -

720 x 400 31.469 70.087 28.322 - / +

MAC

640 x 480 35.000 66.667 30.240 - / -

832 x 624 49.726 74.551 57.284 - / -

1152 x 870 68.681 75.062 100.000 - / +

VESA CVT

720 x 576 35.910 59.950 32.750 - / +

1152 x 864 53.783 59.959 81.750 - / +

1280 x 720

44.772 59.855 74.500 - / +

56.456 74.777 95.750 - / +

1280 x 960 75.231 74.857 130.000 - / +

VESA DMT

640 x 480

31.469 59.940 25.175 - / -

37.861 72.809 31.500 - / -

37.500 75.000 31.500 - / -

800 x 600 37.879 60.317 40.000 + / +

800 x 600 48.077 72.188 50.000 + / +

800 x 600 46.875 75.000 49.500 + / +

1024 x 768

48.363 60.004 65.000 - / -

56.476 70.069 75.000 - / -

60.023 75.029 78.750 + / +

1152 x 864 67.500 75.000 108.000

+ / +

1280 x 800

49.702 59.810 83.500

- / +

62.795 74.934 106.500

- / +

1280 x 960 60.000 60.000 108.000

+ / +

1280 x 1024

63.981 60.020 108.000

+ / +

79.976 75.025 135.000

+ / +

1360 x 768 47.712 60.015 85.500

+ / +

1440 x 900

55.935 59.887 106.500

- / +

70.635 74.984 136.750

- / +

1680 x 1050 65.290 59.954 146.250

- / +

VESA DMT /

DTV CEA

1920 x 1080p 67.500 60.000 148.500

+ / +

VESA GTF

1280 x 720 52.500 70.000 89.040

- / +

1280 x 1024 74.620

70.000

128.943

- / -

❑

N



BN68-02196A-Eng.indb 21 2009-04-09 오후 4:12:36

Sivu latautuu ...

English - 23

Auto Volume → Off / On

Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is

changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the

modulation signal is high or by raising the sound output when the modulation signal is low.

Speaker Select → External Speaker / TV Speaker

If you want to hear the sound through separate speakers, cancel the internal amplier.

The – +, MMUTE buttons do not operate when the Speaker Select is set to External Speaker.

If you select External Speaker in the Speaker Select menu, the sound settings will be limited.

TV's Internal Speakers

Audio Out (Optical, L / R Out) to Sound System

TV / Ext. / AV / Component / PC / HDMI

TV Speaker Speaker Output Sound Output

External Speaker Mute Sound Output

Video No Signal Mute Mute

Sound Select

When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.

Main: Listen to the sound of the main picture.

Sub: Listen to the sound of the sub picture.

Press the TOOLS button to to display Tools menu. You can also set the sound

of the sub picture by selecting Tools → PIP → Sound Select.

T

You can select this option when PIP is set to On.

Sound Reset

Reset All / Reset Sound Mode / Cancel:

You can restore the Sound settings to the

factory defaults.

❑

N

❑

•

N

❑



Selecting the Sound Mode

When you set to Dual l ll, the current sound mode is displayed on the screen.

Type of broadcast

On-screen indication

NICAM

Stereo

Regular broadcast

(Standard audio)

Mono (Normal use)

Regular + NICAM Mono

NICAM

Mono

(Normal)

NICAM-Stereo

NICAM

Stereo

Mono

(Normal)

NICAM Dual-I/II

NICAM

Dual-1

NICAM

Dual-2

Mono

(Normal)

A2

Stereo

Regular broadcast

(Standard audio)

Mono (Normal use)

Bilingual or DUAL-I/II

Dual I Dual II

Stereo Stereo

Mono

(Forced mono)

If the stereo signal is weak and an automatic switching occurs, then switch to the mono.

This function is only activated in stereo sound signal. It is deactivated in mono sound signal.

This function is only available in TV mode.

Press the TOOLS button to to display Tools menu.

You can also select the sound mode by selecting Tools → Dual l ll.

T

N

Speaker Select : TV Speaker

Sound Select : Main

Sound Reset ►

Sound

BN68-02196A-Eng.indb 23 2009-04-09 오후 4:12:37

Sivu latautuu ...

English - 34

Select a network

Access Point: You can select the IP sharer to use when using a wireless network.

If a wireless network is not in the Select a network list, press the Red button.

When the connection is made, you will be returned to the screen automatically.

If you have selected an Access Point with a security authentication:

The Security Key input screen appears. Enter the security key and press the Blue

button on the remote control.

If security encryption type is WEP, 0~9, A~F will be available when you input

security key.

Button Operations

▲/▼/◄/► Moves the selection up/down/left/right.

ENTER

Enters (Inputs) the selected character.

Red button Switch between Upper- and Lower-Case Letters

Green button You can delete an already entered character.

Blue button Press this button to finish entering the security key.

Connecting WPS (Wi-Fi Protected Setup)

If Security Key is already set: In access point list, select WPS.

You can select PBC, PIN, Security Key.

Connecting by using PBC: Select a PBC (Push Button Conguration). Press the

PBC button on the AP (access point) within 2minutes, and wait for connection.

Connecting by using PIN: Select a PIN (Personal Identication Number).

The message showing the PIN Code is displayed. Input the PIN Code at AP

device within 2minutes. Select OK and wait for connection.

Try again if connecting operation doesn’t work

When the connection is not established although tried again, reset the access

point. Please refer to a manual of each access point.

Connecting by using Security Key: When selecting Security Key, the input

window is displayed. Input the security key and press Blue button.

Try again if connecting operation doesn’t work.

If Security Key is not set: When the security setting of AP that supports WPS

is NONE,

you can select PBC, PIN, None Security. None Security is capable of

connecting to AP directly without using WPS function.

Process of PBC, PIN is same as above. Refer to if Security Key is already set.

Try again if connecting operation doesn’t work.



-

N

❑



N

•

N

•

N



N

*

* *

*

Wireless Network Setup

Select a network

n

Move

E

Enter

R

Return

Search

Ad-hoc

AP_1

AP_2

AP_3

AP_4

*

PBC

Security Key

3/9

*

Press the PBC button on the access point.

Access Point Name : AP_3

Cancel

*

Press OK After input TV’s Pincode in the access

point’s setup.

Access Point Name : AP_3

PIN Code : 12345678

Cancel

OK

* *

*

* *

Wireless Network Setup

Security Key

n

Move Number

E

Enter

R

Return

_

A B C D E F G

H I J K L M N

O P Q R S T U

V W X Y Z

0~9

Number

Lowercase

Delete

Done

*

* *

*

Wireless Network Setup

Select a network

n

Move

E

Enter

R

Return

Search

Ad-hoc

AP_1

AP_2

AP_3

AP_4

*

PBC

Security Key

3/9

* *

*

* *

Wireless Network Setup

Security Key

n

Move Number

E

Enter

R

Return

_

A B C D E F G

H I J K L M N

O P Q R S T U

V W X Y Z

0~9

Number

Lowercase

Delete

Done

Continued...

BN68-02196A-Eng.indb 34 2009-04-09 오후 4:12:46

Sivu latautuu ...

English - 43

Using and Sorting the Movie List

You can sort movies in the Movie List by a particular standard.

1. Press the MEDIA.P button on the remote control to display the Media Play menu.

2. Press the ◄ or ► button to select Movie, then press the ENTER

E

button

3. Press the ▲ button twice, then press the ◄ or ► button to select a sorting standard

in the Movie list. (Basic View, Timeline, Title, Folder, Preference)

The movie les are sorted according to the newly selected sorting standard.

To move to the previous/next group, press the (REW) or (FF) button.

4. P

ress the ▼ button twice, then press

the (Play)/ENTER

E

button to play the

movie in the order selected by the user.

The information of the movie les is automatically set.

You can change the Preference.

Sorting Standard for the Movie List

Basic View

It shows whole folder. You can view the photo by selecting the folder.

When sorted according to the Basic View, you cannot set Favorite les.

Timeline

It sorts and shows movies by date. It sorts by year and month from the earliest movie.

Title

It sorts and displays the Movie titles in Symbol/Number/Alphabet/Special order.

Folder

If there are many folders in USB, the movies les are shown in order in each folder. The movie le in the root folder is shown rst

and the others are shown in alphabetical order by name.

Preference

It sorts movies by preference (favourites). You can change the movie preferences.

Changing the Favourites Settings

Select the desired movie le in the movie list, then press the Green button repeatedly until the desired setting appears.

The stars are for grouping purposes only. For example, the 3 star setting does not have any priority over the one star setting.

Favourites options:

★ ★ ★

,

★ ★ ★

,

★ ★ ★

,

★ ★ ★

Movie List Tools Menu

Play Current Group

You can only play movie les in the currently selected sorting group.

Information

The movie le information including the order of the le in the current directory, the

name, the size, the date modied and the path is displayed.

Alternatively, select a movie le from the list and press thelternatively, select a movie le from the list and press the INFO button to view

the information.

Remove Safely

You can remove the device safely from the TV.

N

❑



N



N

❑



O



MOVIE_004

.avi

MOVIE_003

.avi

MOVIE_000

.avi

MOVIE_005

.avi

MOVIE_007

.avi

MOVIE_001.avi

1/5

MOVIE_006

.avi

▶

Tiltle

Basic View

Timeline

Folder

Preference

Apr

Apr.27.2009

Movie

USB



Device

Favorites Settings

Select

T

Tools R Upper Folder

Play Current Group

Information

Remove Safely

MOVIE_004

.avi

MOVIE_003

.avi

MOVIE_000

.avi

MOVIE_005

.avi

▶

Tiltle

Basic View

Timeline

Folder

Preference

Apr

Apr.27.2009

Movie

USB



Device

Favorites Settings

Select

T

Tools R Upper Folder

◀

MOVIE_007

.avi

MOVIE_001.avi

1/5

▶

MOVIE_006

.avi

BN68-02196A-Eng.indb 43 2009-04-09 오후 4:13:07

English - 44

Playing a Movie File

Playing a movie file

1. Press the MEDIA.P button on the remote control to display the Media Play

menu.

2. Press the ◄ or ► button to select Movie, then press the ENTER

E

button

3. Pressing the ◄ or ► button to select a movie to be played.

4. Press the (Play) / ENTER

E

button.

The selected le is displayed at the top with its playing time.

The playing duration of a movie le may be displayed as ‘00:00:00’ if its

playing time information is not found at the start of the le.

Press the ◄ button while playing a video le to rewind.

Press the ► button to fast forward.

Supported Video Formats

Video Codec

File Extention Container Video Decoder Max Resolution Sti

*.avi AVI

XviD 720x576

MPEG1 720x576

MPEG2 720x576

H.264 BP 1920x1088

H.264 HP 1920x1088

MPEG-4 SP 720x576

MPEG-4 ASP 720x576

*.mp4 MP4

H.264 BP 1920x1088

H.264 MP 1920x1088

H.264 HP 1920x1088

MPEG-4 SP 720x576

MPEG-4 ASP 720x576

*.mpg

PS

MPEG1 (Program Stream) 1920x1088

*.mpeg MPEG2 (Program Stream) 1920x1088

*.vro

MPEG2 VOB 1920x1088

*.vob MPEG2 VRO 1920x1088

others

(ts)

TS

MPEG2 (Transport Stream) 1920x1088

H.264 (Transport Stream) 1920x1088

Supported caption formats

Name File Extension Programming Language

MPEG-4(timed-text) .ttxt XML

SAMI .smi HTML

SubRip .srt Simple text

SubViewer .sub Simple text

Micro DVD .sub or .txt Simple text

Video Play Control Buttons

ENTER

E

Play/Pauses the movie file

Play the movie file

Pause the movie file

Exit play mode and return to the movie list.

T TOOLS

Run various functions from the movie menus.

◄/► Skip forwards or backwards through the movie file.

▲ Move to the last view of the current file.

▼ Move to the first view of the current file.

1/3

MOVIE_000.avi

USB

E Pause lr Jump

T

Tools R Return

BN68-02196A-Eng.indb 44 2009-04-09 오후 4:13:08

Sivu latautuu ...

English - 49

Install the application

1. Run the Setup.exe le on the Programme CD supplied with the product.

Alternatively, you can download the le from www.samsung.com.

2. Install the SAMSUNG PC Share Manager as shown in the gures below.

►

► ►

►

3. When the installation is complete, the PC Share Manager icon appears on your Desktop.

Double-click the icon to run the programme.



N

Continued...

BN68-02196A-Eng.indb 49 2009-04-09 오후 4:13:11

Sivu latautuu ...

English - 54

About Anynet+

Connecting Anynet

+

Devices

Anynet

+

is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote.

The Anynet

+

system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this

feature, check if there is an Anynet+ logo on it.

To connect to a TV

1. Connect the HDMI IN (1(DVI), 2, 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an

HDMI cable.

❑

Continued...

Anynet+

Device 4

Anynet+

Device 3

Anynet+

Device 2

TV

HDMI 1.3 Cable

Anynet+

Device 1

BN68-02196A-Eng.indb 54 2009-04-09 오후 4:13:16

Sivu latautuu ...

English - 70

Help Website

Country Website

Austria www.samsung.com → Produkte → Fernseher → [email protected] → Internet@TV

Belgium

www.samsung.com → Producten → televisies → [email protected] → Internet@TV

www.samsung.com → Produits → téléviseurs → [email protected] → Internet@TV

Czech www.samsung.com → Produkty → televizory → [email protected] → Internet@TV

Denmark www.samsung.com → Produkter → stue & soveværelse → [email protected] → Internet@TV

Finland www.samsung.com → Tuotteet → kodinelektroniikka → [email protected] → Internet@TV

France www.samsung.com → Produits → télévisions → [email protected] → Internet@TV

Germany www.samsung.com → Privatkunden → Fernseher → [email protected] → Internet@TV

Greece www.samsung.com → Προϊόντα → τηλεοράσεις → [email protected] → Internet@TV

Hungary www.samsung.com → Termékek → televíziók → [email protected] → Internet@TV

Ireland www.samsung.com → Products → Television → [email protected] → Internet@TV

Italy www.samsung.com → Prodotti → TV → [email protected] → Internet@TV

Netherlands www.samsung.com → Producten → televisies → [email protected] → Internet@TV

Norway www.samsung.com → Produkter → hverdagsrom & soverom → [email protected] → Internet@TV

Poland www.samsung.com → Produkty → telewizory → [email protected] → Internet@TV

Portugal www.samsung.com → Produtos para Consumidores → televisores → [email protected] → Internet@TV

Slovakia www.samsung.com → Produkty → televízory → [email protected] → Internet@TV

Spain www.samsung.com → Productos → televisores → [email protected] → Internet@TV

Sweden www.samsung.com → Produkter → vardagsrum & sovrum → [email protected] → Internet@TV

Switzerland

www.samsung.com → Produits → télévisions → [email protected] → Internet@TV

www.samsung.com → Produkte → Fernseher → [email protected] → Internet@TV

United Kingdom www.samsung.com → Products → Television → [email protected] → Internet@TV

Turkey www.samsung.com → Tüketici Ürünleri → televizyon → [email protected] → Internet@TV

Estonia www.samsung.com → Klientidele → Televiisorid → [email protected] → Internet@TV

Latvia www.samsung.com → Klientiem → Televizori → [email protected] → Internet@TV

Lithuania www.samsung.com → Namams → Televizoriai → [email protected] → Internet@TV

Russia www.samsung.com → Продукты → Телевизоры → [email protected] → Internet@TV

Ukraine www.samsung.com → Потребительские продукты → телевизоры → [email protected] → Internet@TV

Approaching step may be changed later on.

It can be different links for special countrie .

N

BN68-02196A-Eng.indb 70 2009-04-09 오후 4:13:24

Sivu latautuu ...

English - 73

Troubleshooting for internet@TV

Problem Possible Solution

Some widget services do not work. Check with that service provider.

In the widget, press the green button and get contact information or refer to help website

for widget service provider information.

Refer to Help website page.

What is the advantage of single sign

on?

If you create account and register your login information of desired service, you can

access personalized content without additional login.

When a network error occurred, I can’t

use other menus except setting menu.

If network connection doesn’t work, your service might be limited.

Because all widgets except setting widget(Profile widget, Widget Gallery) need to connect

Internet.

Is there any possibility to show adult

movies on YouTube?

Basically, at the list on the menu it is filtered out. But by using search function, It can be

shown. In this case, using the Widget Gallery lock the widget service.