Invacare Matrx MX1 Ohjekirja

This manual MUST be given to the user of the product.

BEFORE using this product, read this manual and save for future reference.

Invacare®

Matrx® MX1

IMX1

EN Back Cushion

User Manual ...........................................................................................3

FR Coussin de dossier

Manuel d’utilisation ........................................................................... 22

DE Rückenkissen

Gebrauchsanweisung ........................................................................ 42

ES Respaldo

Manual de usuario ............................................................................. 61

PT Almofada traseira

Manual de utilização .......................................................................... 81

IT Cuscino dello schienale

Manuale Utente ................................................................................100

DA Rygpude

Brugsanvisning ..................................................................................120

SV Ryggstöd

Bruksanvisning ..................................................................................138

FI Selkänojan pehmuste

Käyttöopas ........................................................................................157

Invacare® Matrx® MX1 2 Part No. 1176090

This product complies with Directive 93/42/EEC concerning medical devices.

Ce produit est conforme à la Directive 93/42/CEE sur les dispositifs médicaux.

Dieses Produkt entspricht der Richtlinie 93/42/EWG über Medizinprodukte.

Este producto cumple con la Directiva 93/42/EEC en lo concerniente a dispositivos médicos.

Este produto está em conformidade com a Directiva 93/42/CEE sobre dispositivos médicos.

Questo prodotto è conforme alla direttiva 93/42/CEE riguardante i dispositivi medici.

Dette produkt overholder EU-direktivet 93/42/EØF om medicinsk udstyr.

Den här produkten uppfyller kraven i direktiv 93/42/EEG om medicintekniska produkter.

Tämä tuote täyttää lääkintälaitteita koskevan 93/42/ETY-direktiivin.

Concepts. Trademarks are identified by ™ and ®. All trademarks are owned by or licensed to Motion Concepts or its subsidiaries unless otherwise noted.

CONTENTS

Part No. 1176090

3 Invacare® Matrx® MX1

1 GENERAL 4

Symbols ........................................................................................................4

Overview .....................................................................................................4

Important Information........................................................................4

Invacare Matrx MX1 ...........................................................................4

Outer Cover.........................................................................................5

Limited Warranty ......................................................................................5

2SAFETY 6

General Guidelines....................................................................................6

Intended Use...............................................................................................6

Installation Information.............................................................................6

Operating Information..............................................................................7

Weight Limitation and Model Numbers...............................................7

3 MONO MOUNT 8

Installation Overview................................................................................8

Included Items.......................................................................................8

Tools Required...........................................................................................8

Before Installation......................................................................................8

Installing the Mounting Hardware..........................................................9

Installing the Tracking Plate on the Back Shell................................. 11

Installing the Back Shell onto the Mounting Hardware.................. 11

Adjusting the Back Height..................................................................... 12

Adjusting the Back Angle ...................................................................... 12

Removing the Mono Mount Hardware.............................................. 13

4 DUAL MOUNT 14

Installation Overview..............................................................................14

Included Items....................................................................................14

Tools Required ........................................................................................14

Before Installation ...................................................................................14

Installing the Angle Adjustable Brackets onto the Back Shell.......15

Clamp Body Adjustment........................................................................15

Installing the Band Clamps ....................................................................16

Installing the Back....................................................................................16

Adjusting the Back Height.....................................................................17

Adjusting the Back Angle and Back Depth........................................18

After Installation......................................................................................18

5 LUMBAR SUPPORT 19

Installing/Adjusting the Lumbar Support............................................19

5 MAINTENANCE 19

Cleaning.....................................................................................................19

General Cleaning...............................................................................19

Laundering...........................................................................................19

Disinfection.........................................................................................19

Inspection..................................................................................................19

Reuse..........................................................................................................20

User Manual

This manual MUST be given to the user of the product.

BEFORE using this product, read this manual and save for future

reference.

Invacare®

Matrx® MX1

1 GENERAL

Invacare® Matrx® MX1

4 Part No. 1176090

1 General

1.1 Symbols

Signal words are used in this manual and apply to hazards or unsafe practices which could result in personal injury or property damage. See the

information below for definitions of the signal words.

1.2 Overview

Important Information

The best way to avoid problems related to pressure sores is to understand their causes and your role in a skin management program.

Your therapist and physician should be consulted if you have questions regarding individual limitations and needs.

All cushions should be selected carefully. Working with your therapist and physician is the best way to assure that a cushion choice matches your

individual needs.

As the needs of the individual become more complex, cushion evaluation becomes more important.

Invacare Matrx MX1

The Invacare Matrx MX1 back is contoured to provide precise orientation within the wheelchair for optimal postural support. The foam is oversized

to provide extra comfort and protection.

The Invacare Matrx MX1 back includes a movable foam lumbar pad that can be installed/inserted behind the existing foam cushion to provide additional

positioning capability. Refer to Lumbar Support

on page 19 for instructions on how to insert and adjust your lumbar support.



WARNING

Warning indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.



CAUTION

Caution indicates a potentially hazardous situation which, if not avoided, may result in property damage or minor injury or

both.



Gives useful tips, recommendations and information for efficient, trouble-free use.

1 GENERAL

Part No. 1176090

5 Invacare® Matrx® MX1

Outer Cover

The outer cover is made of a mesh material that is moisture resistant and breathable. Regular cleaning and inspection of the outer cover is

recommended. Refer to Cleaning on page 19.

1.3 Limited Warranty

This warranty is extended only to the original purchaser/user of our products.

This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state.

Invacare/Motion Concepts warrants this product to be free from defects in materials and workmanship for two years of use by original purchaser. This

warranty does not apply to punctures, tears or burns, nor to the removable cushion cover. If within such warranty period any such product shall be

proven to be defective, such product shall be repaired or replaced, at Invacare's/Motion Concepts’ option, with refurbished or new parts. This warranty

does not include any labor or shipping charges incurred in replacement part installation or repair of any such product. Product repairs shall not extend

this warranty - coverage for repaired product shall end when this limited warranty terminates. Invacare's/Motion Concepts’ sole obligation and your

exclusive remedy under this warranty shall be limited to such repair and/or replacement.

For warranty service, please contact the dealer from whom you purchased your Invacare/Motion Concepts product. In the event you do not receive

satisfactory warranty service, please write directly to Invacare/Motion Concepts at the address on the back cover. Provide dealer's name, address, model

number, the date of purchase, indicate nature of the defect and, if the product is serialized, indicate the serial number.

Invacare Corporation/Motion Concepts will issue a return authorization. The defective unit or parts must be returned for warranty inspection using the

serial number, when applicable, as identification within thirty (30) days of return authorization date. DO NOT return products to our factory without our

prior consent. C.O.D. shipments will be refused; please prepay shipping charges.

LIMITATIONS AND EXCLUSIONS: THE WARRANTY SHALL NOT APPLY TO PROBLEMS ARISING FROM NORMAL WEAR OR FAILURE TO

ADHERE TO THE ENCLOSED INSTRUCTIONS. IN ADDITION, THE FOREGOING WARRANTY SHALL NOT APPLY TO SERIAL NUMBERED

PRODUCTS IF THE SERIAL NUMBER HAS BEEN REMOVED OR DEFACED; PRODUCTS SUBJECTED TO NEGLIGENCE, ACCIDENT, IMPROPER

OPERATION, MAINTENANCE OR STORAGE; OR PRODUCTS MODIFIED WITHOUT INVACARE'S/MOTION CONCEPTS’ EXPRESS WRITTEN

CONSENT INCLUDING, BUT NOT LIMITED TO: MODIFICATION THROUGH THE USE OF UNAUTHORIZED PARTS OR ATTACHMENTS:

PRODUCTS DAMAGED BY REASON OF REPAIRS MADE TO ANY COMPONENT WITHOUT THE SPECIFIC CONSENT OF INVACARE/MOTION

CONCEPTS; PRODUCTS DAMAGED BY CIRCUMSTANCES BEYOND INVACARE'S/MOTION CONCEPTS’ CONTROL; PRODUCTS REPAIRED BY

ANYONE OTHER THAN AN INVACARE/MOTION CONCEPTS DEALER, SUCH EVALUATION SHALL BE SOLELY DETERMINED BY INVACARE/

MOTION CONCEPTS.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES, IF ANY, INCLUDING THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

IT SHALL NOT EXTEND BEYOND THE DURATION OF THE EXPRESSED WARRANTY PROVIDED HEREIN AND THE REMEDY FOR

VIOLATIONS OF ANY IMPLIED WARRANTY SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT PURSUANT TO

THE TERMS CONTAINED HEREIN. INVACARE/MOTION CONCEPTS SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL

DAMAGES WHATSOEVER. THIS WARRANTY SHALL BE EXTENDED TO COMPLY WITH STATE/PROVINCIAL LAWS AND REQUIREMENTS.

2 SAFETY

Invacare® Matrx® MX1

6 Part No. 1176090

2 Safety

The Safety section contains important information for the safe operation and use of this product.

2.1 General Guidelines

Check all parts for shipping damage before using. In case of damage, DO NOT use the equipment. Contact the Dealer for further instructions.

2.1 Intended Use

The Invacare Matrx MX1 back is designed to provide precise orientation within the wheelchair for optimal postural support.

2.2 Installation Information



WARNING

DO NOT use this product or any available optional equipment without first completely reading and understanding these instructions and

any additional instructional material such as owner’s manuals, service manuals or instruction sheets supplied with this product or optional

equipment. If you are unable to understand the warnings, cautions or instructions, contact a healthcare professional, dealer or technical

personnel before attempting to use this equipment - otherwise, injury or damage may occur.



ACCESSORIES WARNING

Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories designed by

other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products.

!

NOTICE

THE INFORMATION CONTAINED IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.



WARNING

The procedures in this manual should be performed by a qualified technician.

After any adjustments, repair or service and before use, make sure that all attaching component parts are secure.

DO NOT install the Invacare Matrx MX1 assembly onto back canes with an outside diameter greater than 1-inch (25 mm) or less than 3/

4-inch (19 mm). Otherwise, injury or damage may occur.

The mounting position of the Invacare Matrx MX1 is directly related to the chair's stability. Use extreme caution when using a new seating

position.

Ensure the Invacare Matrx MX1 is properly secured to the wheelchair before using. Otherwise injury or damage may occur.

2 SAFETY

Part No. 1176090

7 Invacare® Matrx® MX1

2.3 Operating Information

2.4 Weight Limitation and Model Numbers



WARNING

Skin condition should be checked very frequently after the installation of any new seating system.

Your therapist and physician should be consulted if you have any questions regarding individual limitations and needs.

Working with your therapist, physician, and equipment supplier is the best way to assure that a seating choice matches your individual

needs.

As the needs of the individual become more complex, the seating evaluation becomes more important.



Refer to the chart for the weight limitation and stock model numbers.

RM = Mono Mount (installs onto rigidizer bar)

CF = Dual Mount (installs onto back canes)

WIDTH HEIGHT WEIGHT LIMIT

23 CM 31 CM 41 CM

36 cm IMX13623-NH

1545279

IMX13631-NH

1545280

IMX13641-NH

1545281

113 kg

38 cm IMX13823-NH

1545282

IMX13831-NH

1545283

IMX13841-NH

1545284

41 cm IMX14123-NH

1545285

IMX14131-NH

1545286

IMX14141-NH

1545287

43 cm IMX14323-NH

1545288

IMX14331-NH

1545289

IMX14341-NH

1545290

46 cm IMX14623-NH

1545314

IMX14631-NH

1545315

IMX14641-NH

1545316

3 MONO MOUNT

Invacare® Matrx® MX1

8 Part No. 1176090

3 Mono Mount

3.1 Installation Overview

Included Items

• Back Shell with Foam and Cover

• Rigidizer Bracket

• Tracking Plate

• Band Clamp Assemblies

3.2 Tools Required

• Tape measure/ruler

• 4mm hex key (provided)

3.3 Before Installation



Hardware is sold separately.

If any of the hardware is missing or misplaced, please

contact our customer service department and

arrangements will be made to send you the necessary

replacements. Refer to Contact Information

on page 177.



WARNING

Before beginning the installation process, please fully

read through the instructions to understand the steps

and adjustments involved. If you have any questions or

concerns during the installation process, please contact

our customer service department.

3 MONO MOUNT

Part No. 1176090

9 Invacare® Matrx® MX1

3.4 Installing the Mounting Hardware

1. Remove any existing wheelchair back, back upholstery or back cane

hardware. Refer to the user manual that came with the wheelchair

or back upholstery.

2. Loosen the compression bar hardware A inside the rigidizer

bracket B.

3. Install the band clamp D onto the rigidizer bar C in the desired

orientation.



For ease of installation, install the mounting bracket

hardware onto the rigidizer bar first. The MX1 back

cushion can be installed onto the rigidizer bracket after

the mounting hardware is installed.



The compression bar hardware must be loosened to

ensure the rigidizer bracket rests flush against the rigidizer

bar C.

The rigidizer bar is shown in the illustration for reference

only.

A

B

C

B

A

C

2



The rigidizer bracket is secured to the rigidizer bar via a

band clamp.

9-inch (23 cm) Tall MX1 Back Cushions Only:

In order to optimize the available height adjustment on the

back cushion, it may be necessary to invert the rigidizer

bracket during installation as shown below.

B

D

C

3 MONO MOUNT

Invacare® Matrx® MX1

10 Part No. 1176090

4. Position the rigidizer bracket B at a 45° angle to the band clamp.

5. Align the edges of the clamp with the corresponding slots E in the

rigidizer bracket.

6. Carefully slide the rigidizer bracket onto the band clamp.

7. Ensure the clamp is fully engaged in the slots in the rigidizer bracket.

8. Insert the two locking pins F into the rigidizer bracket to hold the

band clamp in place.

9. Ensure the pins are fully inserted into the rigidizer bracket.

10. Center the bracket between the back canes.

11. Tighten the compression bar hardware A just snug enough to hold

the bracket assembly in place.

12. Install the tracking plate. Refer to Installing the Tracking Plate on

the Back Shell on page 11.



The pins should slide into position with little effort. If the

pins are difficult to insert, verify that the band clamp is

properly centered and fully seated inside the slots of the

rigidizer bracket.

B

C

D

F

STANDARD

INSTALLATION

3

4

5

8

E



Do not fully tighten the compression bar at this time.

E

F

C

D

OPTIONAL INVERTED POSITION

FOR 9” (23 CM) TALL BACKS

B

3

A

11

A

3 MONO MOUNT

Part No. 1176090

11 Invacare® Matrx® MX1

3.5 Installing the Tracking Plate on the Back Shell

1. Disengage the cover (not shown) from the top and bottom of the

back shell A.

2. Remove the cushion and cover from the back shell.

3. Secure the tracking plate B to the back using the four screws C,

washers (not shown) and nuts (not shown). Tighten securely.

4. Secure the cushion and cover to the top of the back shell.

5. Secure the cushion and cover to the inside of the back shell.

6. Install the back shell.

3.6 Installing the Back Shell onto the Mounting

Hardware

1. If necessary, disengage the outer cover hook and loop strip at the

bottom rear of the back (not shown).

2. Loosen the two locking wedge washers A on each side of the

rigidizer bracket B.

3. Align the notched channel C in the bracket with the corresponding

raised area D on the mounting rail E.

4. Slide the mounting rail onto the rigidizer bracket.

5. Adjust the back cushion to the desired height along the channels in

the mounting rail.

6. Tighten the locking wedge washers on each side of the rigidizer

bracket to secure the back into position.

7. Adjust the back height. Refer to Adjusting the Back Height

on

page 12.

A

B

C

A

B

A

C

D

E

TOP VIEW

2 & 6

3-5

3 MONO MOUNT

Invacare® Matrx® MX1

12 Part No. 1176090

3.7 Adjusting the Back Height

1. Loosen the two locking wedge washers A on each side of the

rigidizer bracket B.

2. Adjust the back cushion to the desired height along the channels in

the mounting rail C.

3. Tighten the locking wedge washers on each side of the rigidizer

bracket to secure the back into position.

4. Adjust the back angle. Refer to Adjusting the Back Angle

.

\

3.8 Adjusting the Back Angle

1. Loosen the compression bar hardware A.

2. Rotate the back cushion B around the rigidizer bar C to the

desired position.

3. Tighten the compression bar hardware to secure the back cushion

in position.

4. Verify that all mounting hardware is properly tightened and the

back is held firmly in place on the rigidizer bar.



9-inch (23 cm) Tall MX1 Back Cushions Only:

In order to optimize the available height adjustment on

the back cushion, it may be necessary to invert the

rigidizer bracket during installation. Refer to Installing

the Mounting Hardware on page 9.

A

2

B

C



When tightening the compression bar hardware, alternate

back and forth between the two mounting screws to

ensure the compression bar is fully secured.

A

B

C

1 & 3

3 MONO MOUNT

Part No. 1176090

13 Invacare® Matrx® MX1

3.9 Removing the Mono Mount Hardware

1. Open the cushion cover at the bottom of the back cushion (not

shown).

2. Loosen the locking wedge washers A on either side of the rigidizer

bracket B.

3. Slide the back cushion C upward until the mounting rail D is

disengaged from the rigidizer bracket.

4. Loosen the compression bar hardware E to loosen the band clamp

F.

5. Use a hex key G to push out the locking pins H from the rigidizer

bracket.

6. Separate the rigidizer bracket from the band clamp.

A

B

C

D

E

F

G

H

2

3

4

5

6

4 DUAL MOUNT

Invacare® Matrx® MX1

14 Part No. 1176090

4 Dual Mount

4.1 Installation Overview

Included Items

• Back Shell with Foam and Cover

• Angle Adjustable Brackets

• Band Clamp Assemblies

4.2 Tools Required

• Tape measure/ruler

• 4mm hex key (provided)

4.3 Before Installation



Hardware is sold separately.

If any of the hardware is missing or misplaced, please

contact our customer service department and

arrangements will be made to send you the necessary

replacements. Refer to Contact Information on page 177.



WARNING

Before beginning the installation process, please fully

read through the instructions to understand the steps

and adjustments involved. If you have any questions or

concerns during the installation process, please contact

our customer service department.

4 DUAL MOUNT

Part No. 1176090

15 Invacare® Matrx® MX1

4.4 Installing the Angle Adjustable Brackets onto the

Back Shell

1. Remove any existing wheelchair back, back upholstery or back cane

hardware.

2. Remove the four hex screws A and washers (not shown) securing

the two backing plates B to the angle adjustable bracket C.

3. Align the angle adjustable bracket with the slots D on one side of

the back shell E.

4. Place the four washers onto the hex screws.

5. Loosely attach the angle adjustable bracket to the back shell using

the two backing plates, four hex screws and four washers. Do not

tighten the hex screws at this time.

6. Repeat STEPS 2-5 for the other bracket.

4.5 Clamp Body Adjustment

The clamp body is pre-installed onto the angle adjustable bracket at the

factory.

The clamp body C is secured to the angle adjustable bracket D via three

screws A, three washers (not shown) and a backing plate B.

For most typical installations, the clamp body can remain secured in place

on the angle adjustable bracket in order to complete the installation of

the band clamp (refer to Installing the Band Clamps

).

Where necessary, the clamp body may be repositioned by performing

this procedure.

1. Loosen the three screws A.

2. Slide the clamp body C along the slot of the angle adjustable

bracket. Refer to Adjusting the Back Angle and Back Depth

on

page 18.

3. Repeat STEPS 1-3 for the opposite side.



The angle adjustable bracket should be oriented with the

four slots F against the back shell.

A

B

C

E

F

D



After any adjustment, re-tighten the three screws to

secure the clamp body to the angle adjustable bracket.

D

C

A

B

4 DUAL MOUNT

Invacare® Matrx® MX1

16 Part No. 1176090

4.6 Installing the Band Clamps

1. Install the two band clamps A onto the back canes B of the

wheelchair.

4.7 Installing the Back

1. Align and insert the tabs A on the band clamp B with the slots C

in the clamp body D.

2. Ensure the band clamp is fully inserted into the clamp body.

3. Loosen the compression bar hardware E, so the clamp body rests

flush against the back cane.

4. Insert the two locking pins F into the clamp body to lock the band

clamp in position.

5. Ensure both locking pins are fully inserted.

\

6. Tighten the compression bar hardware E to hold the locking pins

F in place. Do not fully tighten the hardware at this time.



Allow the band clamps to rest on the rigidizer bar C.

A

C

B

A

B

C

D



The pins should slide into position with little effort. If the

pins are difficult to insert, verify that the band clamp is

properly centered and fully seated inside the slots G of

the clamp body.

E

F

G

E

F

4 DUAL MOUNT

Part No. 1176090

17 Invacare® Matrx® MX1

7. Repeat STEPS 1-6 to install the back onto the remaining band clamp.

8. Adjust the back shell I so it is centered between the back canes J.

9. Tighten the eight screws K securing the angle adjustable brackets

H to the back shell.

4.8 Adjusting the Back Height

1. Loosen the compression bar hardware A.

2. Adjust the back to the desired height.

3. Tighten the compression bar hardware to secure the clamp bodies

B in place.



It may be necessary to slide the angle adjustable brackets

H to allow the clamp body to properly align with the band

clamp.

H

J

I

J

K



Height adjustments must be made equally on both back

canes.



When re-tightening the compression bar hardware,

alternate back and forth between the screws until the

compression bar is fully secured.

B

A

4 DUAL MOUNT

Invacare® Matrx® MX1

18 Part No. 1176090

4.9 Adjusting the Back Angle and Back Depth

1. Loosen the screws A on the side of both clamp bodies B.

2. Adjust the angle adjustable brackets C in the clamp bodies to

achieve the desired back angle and back depth.

3. Tighten the screws on both clamp bodies to secure the back into

position.

4.10 After Installation

1. Verify that all mounting hardware is fully tightened.

2. Ensure that the back is securely attached to the wheelchair.



Angle and depth adjustments must be made equally on

both sides.

A

B

C

5 LUMBAR SUPPORT

Part No. 1176090

19 Invacare® Matrx® MX1

5 Lumbar Support

5.1 Installing/Adjusting the Lumbar Support

1. To access the lumbar support, open the hook and loop fastening strips

on the outer cover A at the bottom rear of the back shell.

2. The foam lumbar support B is installed inside the Invacare Matrx

MX1 cover between the foam back cushion C and the back shell D.

3. The lumbar support can be adjusted to any desired height/position.

4. Refasten the cover onto the back pan.

5 Maintenance

5.2 Cleaning

General Cleaning

1. Wipe the outer cover with a damp cloth when necessary.

Laundering

1. Release the hook and loop fasteners securing the back cushion

cover. The hook and loop fasteners are located on the top and

bottom edge and inside of the back shell.

2. Remove the foam cushion.

3. Remove the lumbar support. Refer to Installing/Adjusting the

Lumbar Support on page 19.

4. Remove the cover from the back shell.

5. Follow the washing instructions on the cover.

6. Allow the cover to fully dry.

7. Insert the foam cushion into the cover.

8. Ensure the foam cushion is fully inserted and the perimeter of the

foam is aligned with the cover seams.

9. Install the cover onto the back shell.

10. Install the lumbar support. Refer to Installing/Adjusting the Lumbar

Support on page 19.

Disinfection

In the event of the cover becoming contaminated, please ask your

Infection Control Officer for advice. Alternatively, contact Invacare for

their information on decontamination protocol.

5.3 Inspection

Visually inspect parts including hardware, brackets, upholstery materials,

foams (if accessible), and plastics, for deformation, corrosion, breakage,

wear or compression.



The Lumbar Support is a pre-fabricated foam insert that

provides lower back support for additional comfort. The

position of the lumbar insert can be adjusted inside the

Invacare Matrx MX1 cover, or it may be removed if no

lumbar support is desired

C

A

D

B



WARNING

Check ALL fasteners weekly to ensure that mechanical

connections and attaching hardware are tightened

securely - otherwise injury or damage may occur.

DO NOT continue to use this product if problems are

discovered. Corrective maintenance can be performed at

or arranged through your equipment supplier.

5 MAINTENANCE

Invacare® Matrx® MX1

20 Part No. 1176090

5.4 Reuse

The back cushion is suitable for re-use. The following actions should be

taken:

• Cleaning and disinfection according to Cleaning on page 19.

• Inspection according to Inspection

on page 19.

• The back cushion should be adapted for the new user in according

to the sections in the table:



WARNING: Risk of Injury

Always have a dealer inspect the product for damage

before transferring the product to a different user. If

any damage is found, DO NOT use the product.

Otherwise injury may occur.

ADJUSTMENT MONO MOUNT DUAL MOUNT

Back Height

page 12 page 17

Back Angle

page 12 page 18

Lumbar Support

page 19

Sivu latautuu ...

Invacare Matrx MX1 Ohjekirja

Invacare Matrx MX1 Ohjekirja

muilla kielillä

Liittyvät paperit

Muut asiakirjat