Yamaha YSP-5600 Ohjekirja

Digital Sound Projector

Owner’s Manual

Read the supplied booklet “Quick Reference Guide” before using the unit.

English

for Europe model

En 2

CONTENTS

FEATURES 4

What you can do with this unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Preparing remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Controls and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

PREPARATIONS 11

General setup procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

a Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

b Connecting a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

c Connecting playback devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

d Other connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Connecting a subwoofer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Wired network connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

e Connecting the power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

f Initial settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Displaying the menu screen on the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Selecting the language for menu display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Auto setup for appropriate surround effects (IntelliBeam) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Operating the unit by TV’s remote control (HDMI control) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

PLAYBACK 37

Basic operation for playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Enjoying sound based on your preference . . . . . . . . . . . . . . . . . . . . . . . . 38

Playback with 3D surround sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Playback with surround sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Enjoying three-dimensional surround sound (CINEMA DSP 3D/CINEMA DSP) . . . . . . . . . . . . . . . . . . . . . . . .39

2-channel playback (stereo playback mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Delivering sound to a specified location (target playback mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Playing back digitally compressed formats (such as MP3, etc.) with enriched sound

(Compressed Music Enhancer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Clear playback of human voices (CLEAR VOICE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Adjusting the position from which dialog is heard (Dialog Lift) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Adjusting volume for each channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Using useful features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Saving energy with the Eco function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Switching information displayed in the front panel display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Saving this unit’s settings to system memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Wireless playback of audio via Bluetooth connection . . . . . . . . . . . . . . 46

Listening to music from a Bluetooth device (Receiving) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Listening to audio through Bluetooth speakers or headphones (transmitting) . . . . . . . . . . . . . . . . . . . . . . . 49

En 3

NETWORKS 50

Network functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Connecting to a network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Wired network connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Wireless network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Connecting a mobile device to the unit directly (Wireless Direct) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Playing back music stored on media servers (PCs/NAS) . . . . . . . . . . . . 61

Media sharing setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Playing music files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Listening to Internet radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Playback of Internet radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Registering favorite Internet radio stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Playing back music with AirPlay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Playback of iTunes/iPod music contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Playing back music stored on mobile devices . . . . . . . . . . . . . . . . . . . . . 66

Using a mobile device to play songs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

SETTINGS 67

Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Setting the setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Setup menu list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Settings each input source (Option menu) . . . . . . . . . . . . . . . . . . . . . . . . 84

Setting the option menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Option menu list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Advanced setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Setting the advanced setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Advanced setup list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Updating the unit’s firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Using “Network Update” in the setup menu to update firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Updating firmware with connection of a USB flash drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

APPENDIX 91

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96

Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Messages in the front panel display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Status indicator on the wireless subwoofer kit SWK-W16 . . . . . . . . . . 99

When surround effect is not enough . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Installing and adjusting the sound reflection board YRB-100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

Basic Knowledge of Surround Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

What is a Digital Sound Projector? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102

What is Object Based Audio? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

Yamaha’s Audio Technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

Network information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

FEATURES ➤ What you can do with this unit En 4

FEATURES

What you can do with this unit

Audio

Control

Audio

Network contents

Mobile

devices

Control

Audio

Bluetooth

headphones

Mobile

devices

MusicCast devices

HDMI

Control

BD/DVD player

This unit’s

remote control

Audio/

Video*

Audio Audio/

Video*

HDMI

Control

TV remote

control

TV

The unit

Audio

Control

Audio

Subwoofer (optional or available

from third-party manufactures)

Wireless subwoofer kit

SWK-W16

* Supports 4K video and HDCP version 2.2

Sound beams are reflected off walls and a ceiling using unique

real surround sound formats and techniques, allowing listeners to

enjoy their preferred acoustic environment.

• Automatically and quickly adjusts surround

sound effects for the listening room setup

(IntelliBeam)

. p. 30

• Emphasize the sense of immersion and reality of

the sound field with overhead sounds fed via

height channels (3D Surround Sound)

. p. 38

• Reproducing stereo or multichannel sounds with

the sound fields like actual movie theaters and

concert halls (CINEMA DSP 3D/CINEMA DSP)

. p. 39

• Enjoying compressed music with enhanced

sound (Compressed Music Enhancer)

. p. 42

• Delivering sound to a specified location (Target

playback mode)

. p. 41

Sequential operation of a TV, this unit, and

BD/DVD player (HDMI Control)

. p. 35

Listen to audio input to the

unit with Bluetooth

headphones or speakers

. p. 49

Plays back audio content

from Bluetooth

®

devices

. p. 47

Share music

via your home

network

. p. 5

Dedicated apps

for mobile

devices

. p. 5

Wide variety of supported content

• Media server (PC/NAS)

. p. 61

• Internet radio

. p. 62

•AirPlay

. p. 64

• Music stored on mobile

devices

. p. 66

FEATURES ➤ What you can do with this unit En 5

Achieve true 3D surround sound including height

channel audio with the unit alone

Until now, digital sound projectors have reproduced a two-dimensional sound field with

five distinct sound beams: left front, right front, center, left surround, and right surround.

This unit reproduces a three-dimensional sound field offering a greater sense of

immersion and depth by directing additional two sound beams (left height and right

height) upward. It also enables playback in the DTS:X or Dolby Atmos format, which

uses height channel audio signals as input sources. It further incorporates CINEMA

DSP 3D, which produces a more effective sound field.

Dialog Lift function

When playing movies, this feature can be adjusted so that audio such as narratives and

dialog is output from the center speakers, as in a movie theater where speakers are

installed behind the screen, allowing for a sense of integration of conversation with the

movements of the actors (p. 42).

Unrestricted playback of music over a network using

MusicCast CONTROLLER

The free dedicated app for mobile devices, MusicCast CONTROLLER, allows you to

listen to music stored on mobile devices such smartphones, or on servers, or to listen to

Internet radio stations and many kinds of major streaming services.

This app also allows you to distribute content to other MusicCast-enabled devices for

synchronized playback.

See the “MusicCast Setup Guide” for details.

Search for “MusicCast CONTROLLER” on the App Store or Google Play.

Bluetooth

functions

You can receive and play audio from a Bluetooth device, such as a mobile device over

a wireless connection. You can also transmit audio input to the unit to a Bluetooth

headphones.

Using HOME THEATER CONTROLLER (WLAN) to easily

operate the unit

The free dedicated app for mobile devices, HOME THEATER CONTROLLER (WLAN),

allows you to easily operate the unit, performing such tasks as configuring sound

beams on a visual screen, selecting an input source, and adjusting the volume on a

mobile device.

Search for “HOME THEATER CONTROLLER (WLAN)” on the App Store or Google Play.

Wireless subwoofer connection using the wireless

subwoofer kit

The unit and the subwoofer can be connected via a wired connection. In addition, a

wireless connection can be established using the wireless subwoofer kit (SWK-W16) (p.

25).

• In this manual, iOS and Android mobile devices are collectively referred to as “mobile devices”. The specific

type of mobile device is noted in explanations as needed.

The sound image of the system

FEATURES ➤ Supplied accessories En 6

Before connecting, make sure you have received all of the following items.

Supplied accessories

1

China model only: Instead of the optical cable, a digital coaxial audio cable is supplied.

2

The shape of the power cable plug varies depending on where the unit was purchased.

• The supplied optical cable may not be needed depending upon connections.

About this manual

• In this manual, operations that can be performed using either the front panel keys or the remote control

are explained using the remote control.

• indicates supplementary explanations for better use.

• indicates precautions for use of the unit and its feature limitations.

Supplied accessories

The unit Wireless subwoofer kit (SWK-W16)

Remote control Batteries

(AAA, R03, UM-4) (x2)

Optical cable (1.5 m)

1

Power cable (2 m)

2

IntelliBeam microphone (6 m) Cardboard microphone stand

Stands (x2) Screws (For the stands; x2) Subwoofer cable (3 m) System control cable (3 m)

• Owner’s Manual CD-ROM • Quick Reference Guide • MusicCast Setup Guide

FEATURES ➤ Supplied accessories En 7

Preparing remote control

Before installing batteries or using the remote control, be sure to read battery and remote control precautions in “Quick Reference Guide” (separate booklet).

Installing the batteries

Battery × 2

(AAA, R03, UM-4)

Press down on the arrow

and slide the cover in the

direction in which it

points.

Slide the cover back to close it.

Operation range

Within 6 m

FEATURES ➤ Controls and functions En 8

1 STATUS indicator

Lights to show the system condition.

Glows green: Power on

Glows red: Power off (when the HDMI control or network

standby is activated)

Turns off: Power off

2 (Wi-Fi) indicator

Shows the status of wireless network connection (p. 52).

3 (Bluetooth) indicator

Shows the status of Bluetooth connection (p. 46, 49).

4 Remote control sensor

Receives infrared signals from the remote control (p. 10).

5 Front panel display

Displays the unit’s settings, such as the name of an audio

input source or surround mode (p. 44). The setting values

are also displayed.

6 INTELLIBEAM MIC jack

For connecting the supplied IntelliBeam microphone (p. 31).

7 INPUT/CONNECT key

INPUT key

Select an audio input source.

CONNECT key

Use to control the unit using the dedicated MusicCast

CONTROLLER app for mobile devices. See the MusicCast

Setup Guide for details.

8 VOLUME (+/-) keys

Adjust the volume of the unit (p. 37).

9 z key

Turn on/off the unit.

• When the unit is turned off, this unit consumes a small amount of

power in order to search for HDMI signals or to receive signals from

a network device.

• The front panel display turns on for 3 seconds only when the unit is

operated.

• “Dimmer” can adjust the brightness of the front panel display and

indicators in the setup menu (p. 78).

Controls and functions

The unit (front, top)

STATUS

INTELLIBEAM MIC

CONNECT

INPUT

VOLUME

123 4 5 6

798

FEATURES ➤ Controls and functions En 9

• So that the HDMI and NETWORK jacks may be easily located, the illustration of the rear of the unit used in this manual shows their respective positions with the labels used on the unit itself.

1 SYSTEM CONNECTOR jack

Connect to a Yamaha subwoofer so that the subwoofer

functions according to the unit’ power on and off (p. 25).

2 SUBWOOFER OUT jack

For connecting to the subwoofer using a wired connection

(p. 25).

3 AUX1 analog input jacks

For connecting to a playback device equipped with the

analog audio output jacks (p. 24).

4 AUX2 digital coaxial input jack

For connecting to a playback device equipped with a digital

coaxial audio output jack (p. 24).

5 TV and OPTICAL jacks

For connecting to a playback device equipped with an

digital optical audio output jack (p. 22, 23).

6 IR-IN, IR-OUT, and RS-232C jacks

They are control expansion jacks for commercial use only.

7 UPDATE ONLY jack

Use to update this unit’s firmware (p. 88).

8 HDMI IN 1–4 jacks

For connecting an HDMI-compatible playback device such

as a BD/DVD player, a satellite and cable TV tuner, and a

game console (p. 23).

9 HDMI OUT (ARC) jack

For connecting to an HDMI-compatible TV and outputting

video/audio signals (p. 22).

0 NETWORK jack

For connecting to a network with a network cable (p. 52).

A AC IN jack

Connect the supplied power cable (p. 27).

The unit (rear)

SYSTEM

CONNECTOR

AC IN

RL

AUX1

AUX2 TV OPTICAL

IN 1

(HDCP2.2)

IN 2

IN 3

IN 4

OUT

(ARC)

HDMI

IR-IN IR-OUT

UPDATE ONLY

RS-232C

NETWORK

SUBWOOFER

OUT

IN 1

(HDCP2.2)

IN 2

IN 3

IN 4

OUT

(ARC)

HDMI

NETWORK

SYSTEM

CONNECTOR

RL

AUX1

AUX2 TV OPTICAL IR-IN IR-OUT

UPDATE ONLY

RS-232C

SUBWOOFER

OUT

a

12 4 7

0

563

8

9

FEATURES ➤ Controls and functions En 10

1 ECO key

Turn the Eco function on or off (p. 44).

2 Input selector keys, NET key

Input selector keys

Select an audio input source to be played back (p. 37).

NET key

Select an audio input via a network (p. 50). Each time the key

is pressed, the input source is selected as follows:

SERVER  NET RADIO  AirPlay  Streaming music

service (if available)  MusicCast Link  SERVER  …

3 SYSTEM MEMORY keys

Save IntelliBeam measurements, speaker volume, and other

settings (p. 45).

4 SUB (+/-) key

Adjust the volume of the subwoofer (p. 37).

5 MUTE ( ) key

Mute the sound (p. 37).

6 SETUP ( ) key

Display the setup menu (p. 67).

7 S/T/W/X keys, ENTER key

Change the setting (p. 67).

8 RETURN ( ) key

Return to the previous menu screen.

9 CINEMA DSP program keys

When playback is in surround playback mode, select the

CINEMA DSP programs (p. 39).

0 SURROUND key

Switch to surround playback mode (p. 39).

A 3D SURROUND key

Switch to 3D surround playback mode (p. 38).

B CLEAR VOICE key

Turn the CLEAR VOICE function on or off (p. 42).

C ENHANCER key

Turn Compressed Music Enhancer to on or off (p. 42).

D z key

Turn on/off the unit (p. 37).

E NET RADIO (1–3) keys

Register and play streaming services such as Internet radio

stations via the unit (p. 62).

F DIALOG LIFT key

Use the Dialog Lift function to adjust the height from which

dialog is heard (p. 42).

G VOL (+/-) key

Adjust the volume of the unit (p. 37).

H OPTION ( ) key

Display the option menu for each input source (p. 84).

I INFO ( ) key

Switch the information display on the front panel (p. 44).

J STEREO key

Switch to stereo playback mode (p. 41).

K TAR GET k ey

Switch to target playback mode (p. 41).

L WPS/CH LEVEL key

WPS key

Use the key when connecting to a wireless router (access

point) that supports the WPS (push button) feature (p. 54).

CH LEVEL key

Adjust the volume balance during playback (p. 43).

M CONNECT key

Use to control the unit using the dedicated MusicCast

CONTROLLER app for mobile devices. See the MusicCast

Setup Guide for details.

Remote control

1

d

e

f

g

h

i

j

k

l

m

2

3

4

5

6

7

8

9

a

0

c

b

Infrared signal transmitter

PREPARATIONS ➤ General setup procedure En 11

PREPARATIONS

This completes all the preparations. Enjoy playing movies, music and other content with the unit!

• See “NETWORKS” (p. 50) for information regarding network connection and audio playback via a network.

General setup procedure

1 Installation (p. 12)

Position the unit to achieve the optimal surround sound effects. The unit can also be mounted

on a wall.

2 Connecting a TV (p. 22)

Connect a TV to the unit.

3 Connecting playback devices (p. 23)

Connect video devices (such as BD/DVD players) to the unit.

4 Other connections (p. 25)

Connect a subwoofer.

Use a network cable to connect the unit to a router in preparation for wired network connection.

5 Connecting the power cable (p. 27)

After all the connections are complete, plug in the power cable.

6 Initial settings (p. 28)

Perform initial setup, such as adjusting surround sound effects, before attempting playback.

PREPARATIONS ➤ a Installation En 12

This unit reflects sound beams off of walls and a ceiling to create the surround sound effect. The position of this unit in relation to the listening position, walls, and a ceiling is important

to achieving the desired surround sound effects. Refer to pages 12 to 16 when installing the unit. When installing this unit on a rack behind which there is limited space, for example,

it may be easier to connect external devices to this unit first. This will depend upon the installation location. See pages 22 to 27 for information regarding the connection of external

devices.

a Installation

Notes

• Be sure to install this unit on a large, stable stand where it does not fall subject to vibrations, such as from an earthquake, and where it is out of the reach of children.

• There is a built-in antenna on the top of the unit. Do not install it on a metal rack, and do not stack metal items on top of the unit.

• The unit’s speakers are not magnetically shielded. Do not install hard disk drives or similar devices near the unit.

• Do not stack the unit directly on top of other playback devices, or vice versa. Heat and vibrations may result in damage or malfunction.

Recommended place for installation

1

Height channel audio is output in a diagonal

direction upward and forward from the unit (p. 5).

2

Depending upon the rack, table-top stand, or

floor stand used, the stands may not be

necessary.

• Install the unit in the center of the left and right

walls.

• This unit can be mounted on a wall (p. 17).

• The listening position (such as sofa, etc.) should be

located at the front of the unit.

• The distance between the listening position and the

unit should be more than 1.8 m.

• Set the listening position as far from the back wall as

possible (the optimal listening position is halfway

between the unit and the back wall, or slightly closer

to the back wall).

• To achieve desired surround sound effects, be

sure that obstacles such as furniture may not

obstruct the path of sound beams (p. 13).

• Be sure that the unit installed with at least 5 cm

of empty space above and below it.

• Leaving as much space as possible in a

diagonal direction in front of, and above, the

unit when installing it.

1

• Attach the supplied stands to the unit if it will

be installed on a rack

2

(p. 16).

1 2 3 4 5 6

PREPARATIONS ➤ a Installation En 13

This unit outputs sound beam as shown in the illustrations below. Install this unit where

there are no obstacles such as furniture obstructing the path of sound beams.

Otherwise, the desired surround sound effects may not be achieved.

If the unit is installed so that it is parallel to a wall, install it as close to the exact center of

the wall as possible.

If the unit is installed in a corner of a room, position it at a 40–50° angle to the adjacent

walls.

Parallel installation

Install this unit as close to the exact center of the wall as possible.

• If the unit cannot be installed evenly between the left and right walls, sound beams can be adjusted to

achieve natural surround sound effects (p. 16).

Ideal installation condition

Install this unit as close to the exact front of your normal listening position as possible.

The distance between listening position and the unit should be more than 1.8 m.

Example for installing the unit

Objects,

such as

furniture

Parallel installation: Viewed from above

40° to 50°

Objects, such as

furniture

Corner installation: Viewed from above

Viewed from the side

Sound beams

are reflected off

the ceiling

Sound beam output varies depending upon the 3D surround/Surround setting (p. 38, 39)

and the channel output setting (p. 73). The illustration above shows the path of sound

beams when 3D surround is enabled and “Front” in the Channel Out setting is set to

“Beam”.

Viewed from the side

The illustrations above show the path of sound beams when 3D surround is enabled

(p. 38) and “Front” in the Channel Out setting is set to “Stereo”. (p. 73).

Sound beams

are reflected off

the ceiling

More

than

1.8 m

More than 1.8 m

1 2 3 4 5 6

PREPARATIONS ➤ a Installation En 14

Installing in a non-square room

Install this unit so that the sound beams can be reflected off the walls.

• If this unit cannot be repositioned, or the listening position cannot be changed, the optional YRB-100 sound

reflection board may be installed for a better surround sound experience (p. 100).

Irregularly shaped rooms with solid walls on all sides

Irregularly shaped rooms that are open to a hallway on one side

1 2 3 4 5 6

PREPARATIONS ➤ a Installation En 15

Example for installing the unit in living room

• The legs on a table are not considered obstacles as sound beams normally pass

through them. A cupboard installed facing the wall reflects sounds.

• As the heavy curtains absorb sounds, the sound features of the listening room is

different from the case with the curtain opened and the case with the curtain closed.

Using saving settings function enables to save the best settings for each case of

listening room (p. 45).

This unit creates surround sound by reflecting projected sound beams off the walls and

the ceiling of your listening room. The surround sound effects produced by this unit

may not be sufficient when this unit is installed in the following locations.

• Rooms with walls inadequate for reflecting sound beams

• Rooms with acoustically absorbent walls and ceiling

• Rooms with measurements outside the following range:

W (3 to 7 m) × H (2 to 3.5 m) × D (3 to 7 m)

• Rooms where objects such as furniture are likely to obstruct the path of sound beams

• Rooms with less than 1.8 m from the listening position to this unit

• Rooms where the listening position is close to the walls

• Rooms where the listening position is not in front of this unit

• Rooms with a complex shape, such as a slanted ceiling (ceiling lights do not obstruct

sound beams)

The My Surround function creates rich surround sound effects in rooms with less than

optimal surround sound conditions. See “Channel Out” (p. 73) for more information.

Objects, such as

furniture

Unrecommended listening environments

Enjoying surround effects regardless of conditions (My

Surround)

1 2 3 4 5 6

PREPARATIONS ➤ a Installation En 16

This unit’s AUTO SETUP (p. 30) can be used to automatically adjust sound beams to

achieve the optimal surround playback environment according to the listening room

setup. In addition to using AUTO SETUP, sound beams can be adjusted manually to

achieve surround sound effects best suited to the listening room setup when the unit is

installed as described below.

Installing the unit near a corner of the room

When installing the unit near a corner of the room as shown in the illustration below,

front channel sound may seem to come from an unnatural direction if beam settings are

configured using AUTO SETUP.

Should this occur, adjust the left and right front channels using “Image Location” (p. 72)

in the setup menu to achieve more natural sound.

Installing the unit in an irregularly shaped room

When the unit is installed in a room that is not rectangular, sound beams may not be

properly reflected off the walls as shown in the illustration below.

Should this occur, perform AUTO SETUP, and then adjust the angle of beam from the

channel from which sound is not properly heard using “Horizontal Angle” (p. 70) in the

setup menu to achieve even distribution of sound.

Install the stands (supplied) on the bottom of the unit. Align and insert the protrusion on

the stands into the holes on the rear panel of the unit as shown in the illustration, and

then tighten the screws (supplied) to lock the stands in place. The stands need not be

installed when the unit is mounted on a wall using the optional Wall Mount Bracket

SPM-K30.

Adjusting sound beams to achieve optimal surround

sound effects

Left front channel adjusted

When left front channel sound is

unnatural

Installing the stands

Stand (supplied)

Screws (supplied) Stand (supplied)

1 2 3 4 5 6

PREPARATIONS ➤ a Installation En 17

The unit can be installed on a shelf, either above or below the TV, on a third-party rack.

The rack and the shelf on which the unit is placed should be large enough to allow

adequate ventilation around the unit and the rack should be sturdy enough to support

the weight of both the unit and the TV.

The unit can be mounted on a wall using the optional Wall Mount Bracket (such as

SPM-K30).

Dimensions when the unit is mounted using the SPM-K30

Be sure to refer to the dimensions below and leave adequate space for ventilation

around the unit.

Installing the unit on a rack

TV

Mounting the unit on a wall

Notes

Instructions for mounting the unit are not included in the Installation Manual supplied

with the SPM-K30. Always follow the instructions provided in this Owner’s Manual.

Wall Mount Bracket (SPM-K30)

TV

4- 7

24- 7x22

92

114

730

188 355 182355

26.5

71.5

19.4

112.4

SPM-K30 (optional)

YSP-5600

(mm)

1 2 3 4 5 6

PREPARATIONS ➤ a Installation En 18

• The SPM-K30 may not be available in some countries or regions.

• When the unit will be installed using the wall mount bracket, all installation work should be performed by a

qualified contractor or experienced retail staff. The customer should not attempt to install the unit

themselves. Improper installation may cause the unit to fall, resulting in personal injury.

• Installation must be secure enough to bear the weight of the unit and the wall mount bracket, possibly for

years to come, and must also be secure enough to withstand vibrations, such as those caused by

earthquakes. Improper installation may cause the unit to fall, resulting in personal injury.

• To prevent the unit from falling, attach it to a wall constructed of drywall (plasterboard).

• Be sure to use screws capable of supporting the weight of the wall mount bracket and the unit (with steps 2

and 7). Using items other than the specified screws, such as shorter screws, nails, or double-sided tape,

may cause the unit to fall, resulting in personal injury.

• To ensure safety, all screws must be tightened securely. Loose screws may cause the unit to fall, resulting

in personal injury.

• Be sure to leave adequate space for ventilation around the unit so that heat generated by the unit is allowed

to dissipate. Failure to provide adequate space around the unit may cause the unit to overheat internally,

resulting in a fire.

• Do not lean on the unit or apply excessive force to the top of the unit. Doing so may cause the unit to fall,

resulting in personal injury.

• Fix cables in place so that they will not become loose. If a foot or hand becomes accidentally entangled in,

or catches on, a loose cable, the unit may fall, resulting in personal injury.

• Once the unit is installed, safety checks should be conducted on a regular basis. When the unit is used

over an extended period of time, screws can become loose and the installation can weaken due to the

passage of time, vibrations, etc.

• Note that Yamaha cannot be held liable for accidents, including falling of the unit, resulting from improper

installation of the unit, or for damage to walls.

1

Assemble the large wall mount bracket.

Align the screw holes A on the left bracket with those on the right bracket, and

tighten the screws.

2

Attach the wall mount bracket assembled in step 1 to the wall.

In order to secure the unit to the wall, the bracket must first be attached to the

wall in a manner suited to the structure and quality of the wall.

• In order to secure the unit to the wall, drive six (or more) tapping screws from the outside through the holes

in the wall mount bracket.

A

730 mm

Large wall mount bracket (left)

Large wall mount

bracket (right)

Screw (M4; supplied with the SPM-K30)

4mm self-tapping screws (available from third-party manufacturers)

Washers (available from third-party manufacturers)

Installing into a

dray wall

Installing directly

into a wall, etc.

25 mm or more

Dry wall

25 mm or more

Beam, etc.

1 2 3 4 5 6

PREPARATIONS ➤ a Installation En 19

3

Attach the small wall mount brackets to the unit.

4

Attach the safety wires to the small wall mount brackets (left and

right) to prevent the unit from falling.

Screws (M4;

supplied with the

SPM-K30)

Small wall mount

bracket (Type B)

Small wall mount

bracket (Type B)

Screw hole

(left side)

Screw hole

(right side)

Screws(M4;

supplied with

the SPM-K30)

Safety wire

Slip one end through

the loop at the other end

Slip the safety wire

between the bracket and

the projector

1 2 3 4 5 6

PREPARATIONS ➤ a Installation En 20

5

Fit the mounting guide hooks of the small wall mount brackets

attached to the unit into the holes on the left and right sides of the

large wall mount bracket and then slide the unit to the right.

• Hold the unit tight with both hands when attaching or removing the unit to or from the wall. Holding the unit

loosely could cause the unit to fall, resulting in personal injury.

6

Align the holes in the large wall mount bracket with the holes in the

bottom of the small wall mount brackets, and then use two of the

screws (M6; supplied with the SPM-K30) to secure the unit.

Fit the hook into

the hole.

Slide the unit to the

right.

Screws

(M6; supplied with the

SPM-K30)

Bottom side of the unit

1 2 3 4 5 6

Sivu latautuu ...

Yamaha YSP-5600 Ohjekirja

Yamaha YSP-5600 Ohjekirja

muilla kielillä

Liittyvät paperit

Muut asiakirjat